Spindle

Spinning Yarn on a Drop Spindle - Tutorial

Order: Reorder
Duration: 10:55
Updated: 13 May 2008

http://www.theartofmegan.com Here you'll see how to make yarn on a top whorl drop spindle. Megan shows starting a leader yarn, the park method, the drop method, and connecting more fiber.

http://wn.com/Spinning_Yarn_on_a_Drop_Spindle_Tutorial

How To Spin Yarn With a Drop Spindle

Order: Reorder
Duration: 6:45
Updated: 14 Aug 2008

Jody from Alpaca Direct explains how hand spinning works and demonstrates the use of a drop spindle with our Alpaca wool roving.

http://wn.com/How_To_Spin_Yarn_With_a_Drop_Spindle

Drop Spindle Basics

Order: Reorder
Duration: 7:58
Updated: 28 Jan 2007

Abby Franquemont demonstrates the very basics of spinning (including getting started) with a low whorl drop spindle you can make cheaply from hardware store materials

http://wn.com/Drop_Spindle_Basics

How to Spin on a Drop Spindle

Order: Reorder
Duration: 4:42
Updated: 22 Feb 2012

http://www.YARN.com -- Learn how to spin on a drop spindle with WEBS spinning instructor Ashley Flagg. Ashley uses a Schacht Hi-Lo Spindle in the Hi position for this tutorial. This spindle can be found here: http://www.yarn.com/webs-weaving-spinning-spinning-spinning-tools-kits-drop-spindles/webs-spinning-tools-schacht-hi-lo-drop-spindles/ We carry a wide variety of drop spindles in addition to the Schacht Hi-Lo. Our full collection can be found here: http://www.yarn.com/webs-weaving-spinning-spinning-spinning-tools-kits-drop-spindles/

http://wn.com/How_to_Spin_on_a_Drop_Spindle

Balancing OKK HM 60 spindle at MTA

Order: Reorder
Duration: 2:22
Updated: 06 Apr 2010

Balancing the spindle shaft of an OKK HM 60 in a Dynamics Research balancing machine at MTA in Cambridge Ontario Canada. Spindles are meticulously inspected, cleaned, repaired, rebuilt , assembled ,balanced, run-in, then carefully packaged and returned to the customer. MTA phone 519-650-9090 fax 519-650-9092 Please view our website at www.mtaspindlerepair.com. MTA offers our spindle repair service out of Cambridge in the Kitchener Waterloo area.

http://wn.com/Balancing_OKK_HM_60_spindle_at_MTA

Introduction to Hand Spindles......a basic primer

Order: Reorder
Duration: 8:48
Updated: 02 Jun 2009

This is an introduction to the three basic types of hand spindles - high whorl, low whorl and support. There is a quick demonstration of spinning on each. This video should follow fiber preparation and will be a preview to the video on actually spinning on a high whorl spindle.

http://wn.com/Introduction_to_Hand_Spindlesa_basic_primer

How to Repair a Drill Press Spindle

Order: Reorder
Duration: 10:55
Updated: 05 Aug 2011

In this video Mark explains the steps necessary to remove a drill press spindle. A drill press spindle can become bent if it is placed under too much strain. If this happens, you will need to replace it. Get a replacement spindle for your drill press here: http://www.ereplacementparts.com/drill-press-parts-c-18715_18731_18747.html For other power tool replacement parts, visit: http://www.ereplacementparts.com/power-tool-parts.html To read this video's repair article, visit: http://www.ereplacementparts.com/article/7076/How_to_Remove_and_Replace_a_Drill_Press_Spindle.html

http://wn.com/How_to_Repair_a_Drill_Press_Spindle

Russian Spindle Techniques

Order: Reorder
Duration: 9:47
Updated: 01 Feb 2009

Techniques for spinning on a Russian Spindle with Beth Smith from the Spinning Loft.

http://wn.com/Russian_Spindle_Techniques

SOFT BALLET 05/11 SPINDLE

Order: Reorder
Duration: 5:09
Updated: 25 Feb 2009

SOFT BALLET 05/11 SPINDLE　 Reiz [raits] ～ SOFT BALLET LIVE ～　(1992年6月)　 91.11.22　NHKホール　サポートメンバー　上領亘（Dr）　石塚伯広（G）　ソフトバレエ SOFTBALLET

http://wn.com/SOFT_BALLET_05_11_SPINDLE

Rollie Dad Method - Spindle alignment on my mini Lathe from Micromark 7x14

Order: Reorder
Duration: 8:55
Updated: 01 Aug 2009

Using a Dial Test Indicator and instructions from http://www.gadgetbuilder.com/Lathe_Align.html to use Rollie Dad's Method to measure spindle & ways alignment on my 7x14 MicroMark Mini-Lathe Check out www.nyccnc.com for more!

http://wn.com/Rollie_Dad_Method_Spindle_alignment_on_my_mini_Lathe_from_Micromark_7x14

Muscle spindles animation

Order: Reorder
Duration: 8:21
Updated: 08 Nov 2011

Explaining muscle spindles reflex arc and its response to rapid strecth as a injury prevention mechanism

http://wn.com/Muscle_spindles_animation

Drop Spindle Fiber Spinning

Order: Reorder
Duration: 4:46
Updated: 11 Sep 2008

Learn up close from Jodi Moody and AlpacaDirect.com - Drop spindle spinning techniques

http://wn.com/Drop_Spindle_Fiber_Spinning

Dugard 32 - Sub Spindle CNC lathe, 7 axis and sliding headstock from Dugard.com

Order: Reorder
Duration: 2:23
Updated: 15 Nov 2010

More information at http://www.dugard.com Machine Specification Bar Capacity - 32mm Max. length turned - 165mm Max X axis travel (vertical) - 190mm Max Y axis travel (longitudinal) - 300mm Max Z axis travel (cross) - 165mm Max component length via parts catcher - 140mm Full C-axis Collet system - TRB32mm capacity Collets TRB32 - 5 off round collets supplied Spindle speeds range 100-6000 RPM Spindle power Fanuc Drive - 7 kW A.C. Tool shank - 12mm2 Boring bar size (maximum) - 25mm Rapid traverse speed on all axes - 30m/min Mill/drill heads - R 20 Collet Mill/drill head speeds - 0~ 6,000RPM Machine weight - 2400 Kg Standard Equipment Collet Chuck Spindle Collet - TRB32 Coolant Tank and pumps Radial Milling Attachment Axial Milling Attachment Air Blast Chip Blower Side milling/drilling heads - 4 End working milling/drilling heads - 3 Automatic parts catcher magazine bar feed Inc interface - 32mm capacity x 3m length Swarf conveyor & bin Syntec PC based control, with 10" TFT colour screen, graphics and Mitsubishi drives and motors. Sub Spindle with full C axis and parts ejector including 4 station tool post Sub-spindle Driven tools Allows choice of combination between 4 Turning to 4 driven tools or 2 driven tools and 2 Turning Tools or 3 driven tools and 1 Turning Tool or 1 driven tool and 3 turning tools For more information go to http://www.dugard.com video music by Dino Psaras

http://wn.com/Dugard_32_Sub_Spindle_CNC_lathe,_7_axis_and_sliding_headstock_from_Dugardcom

Homemade Drop Spindle

Order: Reorder
Duration: 9:44
Updated: 11 Dec 2012

This video shows how I made a drop spindle for my wife. This video also shows how to make the 'whirl' from scratch. If you do not wish to do this, a wooden wheel can be purchased from an art supply store and you can skip this step in the video. I have found that the 1/4" thick X 3" diameter works best for a general drop spindle. Enjoy making your own!

http://wn.com/Homemade_Drop_Spindle

Spindle Motor Calibration

Order: Reorder
Duration: 7:12
Updated: 05 Dec 2010

Mach3 calibration video

http://wn.com/Spindle_Motor_Calibration

Ridgid Oscillating Edge belt/spindle sander

Order: Reorder
Duration: 6:20
Updated: 08 Sep 2012

We take a look at the Ridgid Oscillating Edge belt/spindle sander model EB4424

http://wn.com/Ridgid_Oscillating_Edge_belt_spindle_sander

Spindle Turning Basics

Order: Reorder
Duration: 22:57
Updated: 13 Aug 2012

Learn the basic tools and techniques used to turn a spindle on the lathe. WOOD magazine's Brian Simmons demonstrates how to create a pommel, cove, bead, V-groove, and taper.

http://wn.com/Spindle_Turning_Basics

How to Use and Set a Spindle Moulder

Order: Reorder
Duration: 15:08
Updated: 16 Jan 2013

http://wn.com/How_to_Use_and_Set_a_Spindle_Moulder

Drop spindle lesson from Pamsfiber at Dream Come True Farm

Order: Reorder
Duration: 6:46
Updated: 31 Jan 2010

Pams Fiber Studio walks you through the art of using the drop spindle with this short demo, enjoy. We live on a farm that raises wool for fiber arts, I teach spinning on both the drop spidle and wheel. My blog is www.Pamsfiber.blogspot.com there you can see all the goings on, on our farm! Or visit my Etsy shop at www.Pamsfiber.Etsy.com

http://wn.com/Drop_spindle_lesson_from_Pamsfiber_at_Dream_Come_True_Farm

Spindle Project

Order: Reorder
Duration: 15:15
Updated: 25 Mar 2012

Spindle Turning is a precise craft and hones the hand's skills nicely. I find it refreshing to follow a set design and produce a run of pieces without having to worry about the art and finesse of the individual Sounding Bowl. Ultimately skill lies in the unconscious and is honed by repetition not by study. Repetitious work like this in reasonable quanitities relaxes the mind and improves Presence of Being

http://wn.com/Spindle_Project

Stuck Spindle Seagate 7200.12 - Casual Techs

Order: Reorder
Duration: 6:46
Updated: 26 Aug 2011

A client's Seagate 7200.12 was making a steady, faint beeping noise. The platters weren't spinning and the drive seemed dead. This is usually stiction (when the read/write heads stick to the platter) or a stuck spindle motor. Since this was a stuck spindle motor, I show you how to un-stick (release) it. Casual Techs is Hawaii's first (& only as of 8/26/11) data recovery company with an onsite ISO class 5 clean room solution. http://casualtechs.com

http://wn.com/Stuck_Spindle_Seagate_720012_Casual_Techs

Shop Made CNC High Speed Milling Spindle

Order: Reorder
Duration: 5:06
Updated: 06 Mar 2012

I have a pieced together CNC mill that needed a new spindle. I couldn't find exactly what I wanted, so I decided to build it. I purchased a rather inexpensive Chinese collet holder, some good bearings, used a high quality brushless RC motor I already had, and made the rest. It took longer than expected, but I'm very happy with the result. dieselrc.com/projects/cncspindle/

http://wn.com/Shop_Made_CNC_High_Speed_Milling_Spindle

Spinning using a Turkish drop spindle

Order: Reorder
Duration: 3:43
Updated: 13 Apr 2009

The turkish style drop spindle is fun to use - when you've finished spinning or plying, it slips apart leaving your yarn in a neat ball. More information about using a Turkish spindle is at: http://handspinner.co.uk/using_turkish_drop_spindle.html

http://wn.com/Spinning_using_a_Turkish_drop_spindle