- published: 03 Apr 2016
- views: 1064
Create your page here
Thursday, 07 April 2016
-
remove the playlistA Set
-
remove the playlistLatest Videos
-
remove the playlistLongest Videos
- remove the playlistA Set
- remove the playlistLatest Videos
- remove the playlistLongest Videos
back to playlist
Soulja Boy tells our photo that him and his team were setup when cops raided his dressing room and now his publicist is paying for it.
A Complete series of Lecture on Microprocessor and its working.
Lecturer : Diwakar Vaish
Topic : 8085 Microprocessor ( A Part of 4 Year Robotics Course)
A-SET is India's first and only Institution that has been doing extensieve research over Humanoid Robots. We are providing training to top Institution all across India including IIT's.
Our course material Includes
Electronics of Robotics
Programming of Robotics
Kinematics
Physical Dynamics
Motion Planning
Machine learning and AI
etc.
- published: 30 Sep 2012
- views: 38682
Set A Fire by Jesus Culture with lyrics. This video is good to use for both personal and group worship! God Bless!
- published: 25 Nov 2012
- views: 6194081
Heat Bluing A Set Of Steel Clock Hands, by Clickspring.
In this video I go through the process of bluing a set of steel clock hands.
Heat bluing of small steel parts is a key element of traditional clock and watchmaking. It can transform the appearance of even the most mundane parts, and is also believed to afford the parts a small measure of corrosion resistance.
The rest of the process for making the hands and motion work of the current clock project can be found here: https://TBA
If you would like to help support the creation of these videos, then head on over to the Clickspring Patreon page: https://www.patreon.com/clickspring
________________________________________________________
A very special thank you to patrons KayKey From Norway, and Dan Keen.
________________________________________________________
Ask Me A Question:
http://www.clickspringprojects.com/contact.html
Follow Clickspring:
https://www.patreon.com/clickspring
http://www.facebook.com/Clickspring1
http://plus.google.com/u/0/113668471124073837794/posts
http://instagram.com/clickspring1/
https://www.tumblr.com/blog/clickspring1
https://www.pinterest.com/clickspring1
Abbreviated Transcript:
00:17 Generally its presented as 4 steps - Harden the part, Heat temper it to Blue, Polish the surfaces, and then Heat again for a cosmetic blue. But first things first, what is it about heating steel that makes it turn blue?
00:50 When full spectrum light strikes the surface, some is directly reflected by that oxide, and some passes through and is reflected by the underlying metal, and so travels a tiny bit further. The two waveforms are now slightly out of phase, and interact as they leave the upper surface.
01:06 Depending on the thickness of the film, some colors are cancelled, and what we see are those colors that remain. When the film is thin, we see a pale straw color. As the film gets thicker other colors are removed, and color we see gradually shifts from brown through purple to a rich blue.
01:24 This is known as thin film interference; its what causes the rainbow of colors in soap bubbles, and a very similar effect generates those fantastic iridescent colors you can see on some birds and insects.
01:37 In our case if we get everything right, the result is a magical deep blue color on our steel part, that no other process can quite match. And I should also mention that the result is not just a pretty blue color, but also a very reliable proxy for determining temperature, which we use during the tempering process in a moment.
01:55 So with a bit of the science behind the process in hand, we can make a few statements about what factors will affect the quality of the final blue color we're pursuing. For one thing it seems reasonable to expect that a uniform oxide thickness would give a uniform color, so it follows that we'll want to heat the part as uniformly as we can. I've made a dedicated set of bluing tools.
02:31 Any sort of contamination will not only affect
the way the oxide forms, but also the light reflection, so we want the work to be meticulously clean just before we start heating. Hardened steel will take a mirror polish much more readily than a soft steel. So the first step is to harden the work.
03:52 Once finished, that boric acid coating comes off very easily with a little boiling water. Now at the moment, the parts are glass hard, and much too fragile to be safely handled without risking breaking them, so I need to temper that hardness.
04:43 As it happens the temperature we want to temper
the work to, corresponds to the blue oxide color, a little over 300 degrees celcius, which is why you see the steel blued twice - once is for this tempering, and the second time at the very end, is just for the appearance. And you can see with this hour hand, just how sensitive the bluing process is to a temperature differential.
06:38 The final surface finish comes from using diamantine powder on a tin lap. Again with short moves to maintain the flat surfaces.
07:51 It pulls the last of the solvent residue from the surface, and leaves the parts quite clean. And you'll notice that I don't touch the parts with bare hands from here on, until the bluing is finished, to maintain that clean surface.
08:40 If the color has any sort of flaw, like for example you can see that the very tip of this hour hand doesn't quite go fully blue, then the part must be taken back to the previous polishing stage.
09:11 There are also several other factors that can affect the outcome too, beyond what I've mentioned here, including the composition of the steel, the ambient conditions, as well as the nature of the light being used to illuminating the part. All of this can be experimented with to further improve the final result.
References:
Hardening, Tempering and Heat Treatment (Workshop Practice)
http://www.amazon.com/Hardening-Tempering-Treatment-Workshop-Practice/dp/0852428375
Heat Bluing A Set Of Steel Clock Hands, by Clickspring.
- published: 20 Mar 2016
- views: 317
Music video by Adele performing Set Fire To The Rain. (C) 2011 XL Recordings Ltd
- published: 16 Nov 2011
- views: 216419792
Song: Set Fire to the Rain
Artitst: Adele
All Rights Are to the Original Owners (not me)
One of my favorites from Adele's latest album 21
Disclaimer: None of this is mine. All is Adele's
did the best I could do with the lyrics. Mistakes happen, if you find one feel free to drop it in the comment box. Enjoy!
- published: 23 Feb 2011
- views: 332631193
Need a LIVE tutor to help answer a question? Check out the people at http://www.tutor.com/signup?AdDist=1&ExAdId;=90fddaff-89aa-4a4f-91da-90841e168246&TDC;_OfferCode=e2bf363b-0cb8-4635-98c3-2b5211d0847a&subject;=math&grade;=undefined for a FREE 30 minute session!
The Span of a Set of Vectors. In this video, I look at the notion of a span of a vector set. I work in R2 just to keep things simple, but the results can be generalized! I show how to justify that two vectors do in fact span all of R2.
- published: 26 Aug 2011
- views: 352233
Making A Set Of Reusable Emery Sticks, by Clickspring
This is such a simple idea, but I remember when a clockmaker friend first showed it to me, I thought "Wow, that's genius!". It's so simple to do, and ensures that you use your emery paper efficiently.
If you would like to help support the creation of these videos, then head on over to the Clickspring Patreon page: https://www.patreon.com/clickspring
Ask Me A Question:
http://www.clickspringprojects.com/contact.html
Follow Clickspring:
https://www.patreon.com/clickspring
http://www.facebook.com/Clickspring1
http://plus.google.com/u/0/113668471124073837794/posts
http://instagram.com/clickspring1/
https://www.tumblr.com/blog/clickspring1
https://www.pinterest.com/clickspring1
Transcript:
00:06 Using an emery stick on the lathe is a great way to take care of the final surface finish of a part.
00:11 The sticks are available commercially, but they are a bit expensive to buy, so here's a way to make a good quality version of your own. Take a sheet of emery paper, place it grit side up on the bench, and then put a strip of masking tape on 2 sides.
00:30 Flip it over, and then place a wooden handle squarely across the end of the paper, like this. Now score the edge of the paper as you roll it onto the handle.
00:41 I like to use the back side of a trimming blade, because it scores the paper well, but doesn't cut through it.
00:47 As you fold, pull the paper tightly onto the handle, and then seal the tape at each end after each turn. This helps keep the paper tight on the stick, and leaves a nice crisp corner.
00:58 The wood I'm using is a piece of oak trimming from the hardware store, and it works great for the sort of work that I do, but you can adapt the idea to use the size or density of wood that best suits your needs. As you load up a side of paper, it can simply be torn off to reveal a fresh surface.
01:20 And if all has gone well fitting the paper to the stick, you'll always have a crisp corners exposed as you tear off the old paper. Make one for each grit stage that you use, and then put them somewhere convenient for easy access.
01:37 For those parts that need a harder backing to the emery paper, an alternative is to use something a little more solid, like this shop made brass polisher.
01:46.380,0:01:50.850
The harder backing will reduce its tendency to round edges. Spray Adhesive is perfect for bonding the emery paper in place, and then it can be trimmed to size.
02:06 Now it's not quite as convenient as the wood backed version, but it's perfect for those parts where you really want to avoid rounding the profile.
02:18 The hard backing can be scaled to suit the
size of the parts that you work on, and be sure to always fit a proper handle to it when using it on the lathe.
Making A Set Of Reusable Emery Sticks, by Clickspring.
- published: 06 Dec 2015
- views: 113313
Basis for a Set of Vectors. In this video, I give the definition for a apos; basis apos; of a set of vectors. I think proceed to work an example that shows three vectors that I picked form a basis for R_3.
- published: 09 Sep 2011
- views: 175655
To ensure that you never miss a brand new hit song, please subscribe to the Sing King Karaoke channel here: http://bit.ly/119sKFQ
Learn your favourite songs and sing along to them in style with Sing King Karaoke - your number one source for YouTube karaoke and lyrics.
You can also find us on:
Facebook - http://on.fb.me/189zrPZ
Twitter - http://bit.ly/ImhTEt
Google+ - http://bit.ly/1eP2bg1
Instagram: http://bit.ly/Singstagram
Snapchat: SingKingKaraoke
If you wish to use our music in your own YouTube videos, all we ask is that you leave a link to our channel and credit to Sing King for the instrumental in your video description. We also love to check out as many fan videos as possible, so feel free to send us a link for your covers :)
- published: 29 Jul 2015
- views: 1198701
Defying all the odds, identical twin sisters Kerri Bunker and Kelli Wall from Utah, gave birth to sets of twins for the second time each. Wall gave birth to her pair eight weeks early and Bunker's arrived a month before their due date. Each set of twins and their mothers are doing great and are perfectly healthy. Bunker admitted that she and her husband were in shock when they heard the news. Wall and her husband wanted another child and couldn't believe she was having doubles again.
- published: 22 Feb 2016
- views: 1170
Machining A Set Of Vintage Style Rope Knurls, by Clickspring
In this video I make a set of classic rope knurling wheels, to put some ornamental rope knurl patterns on some of my future projects. There's plenty of lathe and mill work, as well as a bit of hand finishing with a fine cut file.
This is the main video in a series of at least 3, that will relate to the subject of creating these beautiful rope knurl patterns. Be sure to check out the other videos when you get a chance.
The other two videos in this little series are:
Spare Parts #5 - Making A Bump Style Knurling Tool Holder: https://www.youtube.com/watch?v=TyN1VBgv5cQ
Spare Parts #4 - Making, Hardening And Tempering A Form Tool For The Lathe: https://www.youtube.com/watch?v=nZsnGhwsjjo
Free plans for the double angled cutter, and form tool:
http://www.clickspringprojects.com/uploads/3/8/2/2/38221101/double_angled_cutter.pdf
http://www.clickspringprojects.com/uploads/3/8/2/2/38221101/form_tool_profile.pdf
If you would like to help support the creation of these videos, then head on over to the Clickspring Patreon page: https://www.patreon.com/clickspring
Ask Me A Question:
http://www.clickspringprojects.com/contact.html
Follow Clickspring:
https://www.patreon.com/clickspring
http://www.facebook.com/Clickspring1
http://plus.google.com/u/0/113668471124073837794/posts
http://instagram.com/clickspring1/
https://www.tumblr.com/blog/clickspring1
https://www.pinterest.com/clickspring1
Abbreviated Transcript:
00:31 The rope pattern is formed by a knurling wheel that looks like this, that has a number of fine teeth around its perimeter. Now to form those teeth, I'm going to use an additional cutter that looks like this.
00:44 Each tooth on this cutter has a 90 degree V profile, and there are 4 teeth milled around a central axis. There's relief at the back of each tooth, and the cutting rake angle will be generated by milling past the tool centerline. I'll be using some of this EN8 steel to make both the cutter and the knurl.
02:43 After finding the edge of the work, I positioned this end mill, the correct distance past the centerline, and then set about milling the gaps between the teeth. For this part of the job I'm using the simple indexing plate of the dividing head, thats just behind the chuck.
03:32 For the cutter to work correctly, the back side of each tooth needs to be relieved, so I'll be removing this little corner of metal here on each tooth, and shaping it to blend with the back surface.
04:20 But I thought it might be worth showing what happens to the steel if nothing is done to protect it while its heated, so I've wrapped the working end of the cutter as usual, but I've left the chucking end uncoated, and exposed to the torch flame. With nothing to stop the oxidation, the unprotected end has formed a thick black scale, while the protected end is mostly free from scale, and looking quite bright.
05:39 Now you'll have noticed that the knurl teeth are cut on an angle to the body of the knurl, which means that the knurl blanks need to somehow be securely presented at an angle to the cutter. I could have simply cut them while they were still attached to the parent stock, but I figured since I was making a few of them, a dedicated holder would be bit more efficient, and I can keep it for when I make more in the future. So I made this arbor to hold them on the mill.
07:47 Back onto the mill, the work was again secured in the dividing head, and then tilted to an angle of 30 degrees. I took some time to cutter was carefully positioned against the work, to make sure it was centered on the blank, and then the teeth were cut into the knurl.
08:19 For this particular knurl I indexed for 40 teeth, which was simply one turn of the handwheel on the dividing head, for each cut. Now the quality of the cut was a little rougher than I would have liked, so I gave it another pass without hanging the depth, and that seemed to clean it up.
08:56 With that first one complete, I used a few different angles, as well as index counts, to make the full set of 5 knurls, which will give me a good range of different rope knurl patterns. Each of those knurls was quench hardened and then tempered. So that's a set of rope knurls complete and ready for use, so let's give them a run.
09:41 Bump style knurling tools generate an enormous side force on the work, so tailstock support definitely helps. And even with this support, the work still deflects quite a lot as the pattern is formed.
10:24 Now I didn't make any effort to calculate the correct diameter to avoid double tracking, in fact I was surprised to find that it wasn't really necessary. In no time at all the knurl cut its way down to a diameter that worked, and the pattern started to jump out.
References:
Frank Ford (Luthier/Machinist)
http://www.frets.com/HomeShopTech/Projects/RopeKnurl/ropeknurl.html
Machining A Set Of Vintage Style Rope Knurls, by Clickspring
- published: 21 Sep 2015
- views: 277044
Royal flush
In poker, players construct hands of five cards according to predetermined rules, which vary according to which variant of poker is being played. These hands are compared using a hand ranking system that is standard across all variants of poker, the player with the highest-ranking hand winning that particular deal in most variants of poker. In some variants, the lowest-ranking hand can win or tie.
These hand rankings are also used in some other card games, and in poker dice.
The ranking of a particular hand is increased by including multiple cards of the same card rank, by all five cards being from the same suit, or by all five cards being of consecutive rank. The relative ranking of the various hand categories is based on the probability of being randomly dealt such a hand from a well-shuffled deck.
The following rules apply to the ranking of all poker hands. Under typical rules there are 7,462 distinct ranks.
This page contains text from Wikipedia, the Free Encyclopedia -
http://en.wikipedia.org/wiki/List_of_poker_hands
This article is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License, which means that you can copy and modify it as long as the entire work (including additions) remains under this license.
This article is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License, which means that you can copy and modify it as long as the entire work (including additions) remains under this license.
Set may refer to:
This page contains text from Wikipedia, the Free Encyclopedia -
http://en.wikipedia.org/wiki/Set
This article is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License, which means that you can copy and modify it as long as the entire work (including additions) remains under this license.
This article is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License, which means that you can copy and modify it as long as the entire work (including additions) remains under this license.
DeAndre Cortez Way (born July 28, 1990), better known by his stage name Soulja Boy Tell 'Em, or simply Soulja Boy, is an American rapper, record producer, actor, and entrepreneur.
In September 2007, his single "Crank That (Soulja Boy)" reached number one on the Billboard Hot 100. The single was initially self-published on the internet, and it later became a number-one hit in the United States for seven non-consecutive weeks starting in September 2007. On August 17 Way was listed at #18 on the Forbes list of Hip-Hop Cash Kings of 2010 earning $7 million for that year.
Way has currently released three studio albums and one independent album: his debut studio album Souljaboytellem.com (2007) was certified platinum by the RIAA. However, his next two albums, iSouljaBoyTellem (2008) and The DeAndre Way (2010) did not match the commercial success of his debut, the latter only selling 100,000 copies, despite the success of several singles across both albums, such as "Kiss Me Thru the Phone" and "Turn My Swag On" (iSouljaBoyTellem) and "Pretty Boy Swag" (The DeAndre Way).
This page contains text from Wikipedia, the Free Encyclopedia -
http://en.wikipedia.org/wiki/Soulja_Boy
This article is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License, which means that you can copy and modify it as long as the entire work (including additions) remains under this license.
This article is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License, which means that you can copy and modify it as long as the entire work (including additions) remains under this license.
- Loading...
-
1:17Soulja Boy: My Publicist’s Arrest Was A Set Up
Soulja Boy: My Publicist’s Arrest Was A Set UpSoulja Boy: My Publicist’s Arrest Was A Set Up
Soulja Boy tells our photo that him and his team were setup when cops raided his dressing room and now his publicist is paying for it. -
50:37A-SET Robotics, Microprocessor 8085 Lecture 1
A-SET Robotics, Microprocessor 8085 Lecture 1A-SET Robotics, Microprocessor 8085 Lecture 1
A Complete series of Lecture on Microprocessor and its working. Lecturer : Diwakar Vaish Topic : 8085 Microprocessor ( A Part of 4 Year Robotics Course) A-SET is India's first and only Institution that has been doing extensieve research over Humanoid Robots. We are providing training to top Institution all across India including IIT's. Our course material Includes Electronics of Robotics Programming of Robotics Kinematics Physical Dynamics Motion Planning Machine learning and AI etc. -
4:38Set A Fire - Jesus Culture w/ Lyrics
Set A Fire - Jesus Culture w/ LyricsSet A Fire - Jesus Culture w/ Lyrics
Set A Fire by Jesus Culture with lyrics. This video is good to use for both personal and group worship! God Bless! -
10:16Spare Parts #12 - Heat Bluing A Set Of Steel Clock Hands
Spare Parts #12 - Heat Bluing A Set Of Steel Clock HandsSpare Parts #12 - Heat Bluing A Set Of Steel Clock Hands
Heat Bluing A Set Of Steel Clock Hands, by Clickspring. In this video I go through the process of bluing a set of steel clock hands. Heat bluing of small steel parts is a key element of traditional clock and watchmaking. It can transform the appearance of even the most mundane parts, and is also believed to afford the parts a small measure of corrosion resistance. The rest of the process for making the hands and motion work of the current clock project can be found here: https://TBA If you would like to help support the creation of these videos, then head on over to the Clickspring Patreon page: https://www.patreon.com/clickspring ________________________________________________________ A very special thank you to patrons KayKey From Norway, and Dan Keen. ________________________________________________________ Ask Me A Question: http://www.clickspringprojects.com/contact.html Follow Clickspring: https://www.patreon.com/clickspring http://www.facebook.com/Clickspring1 http://plus.google.com/u/0/113668471124073837794/posts http://instagram.com/clickspring1/ https://www.tumblr.com/blog/clickspring1 https://www.pinterest.com/clickspring1 Abbreviated Transcript: 00:17 Generally its presented as 4 steps - Harden the part, Heat temper it to Blue, Polish the surfaces, and then Heat again for a cosmetic blue. But first things first, what is it about heating steel that makes it turn blue? 00:50 When full spectrum light strikes the surface, some is directly reflected by that oxide, and some passes through and is reflected by the underlying metal, and so travels a tiny bit further. The two waveforms are now slightly out of phase, and interact as they leave the upper surface. 01:06 Depending on the thickness of the film, some colors are cancelled, and what we see are those colors that remain. When the film is thin, we see a pale straw color. As the film gets thicker other colors are removed, and color we see gradually shifts from brown through purple to a rich blue. 01:24 This is known as thin film interference; its what causes the rainbow of colors in soap bubbles, and a very similar effect generates those fantastic iridescent colors you can see on some birds and insects. 01:37 In our case if we get everything right, the result is a magical deep blue color on our steel part, that no other process can quite match. And I should also mention that the result is not just a pretty blue color, but also a very reliable proxy for determining temperature, which we use during the tempering process in a moment. 01:55 So with a bit of the science behind the process in hand, we can make a few statements about what factors will affect the quality of the final blue color we're pursuing. For one thing it seems reasonable to expect that a uniform oxide thickness would give a uniform color, so it follows that we'll want to heat the part as uniformly as we can. I've made a dedicated set of bluing tools. 02:31 Any sort of contamination will not only affect the way the oxide forms, but also the light reflection, so we want the work to be meticulously clean just before we start heating. Hardened steel will take a mirror polish much more readily than a soft steel. So the first step is to harden the work. 03:52 Once finished, that boric acid coating comes off very easily with a little boiling water. Now at the moment, the parts are glass hard, and much too fragile to be safely handled without risking breaking them, so I need to temper that hardness. 04:43 As it happens the temperature we want to temper the work to, corresponds to the blue oxide color, a little over 300 degrees celcius, which is why you see the steel blued twice - once is for this tempering, and the second time at the very end, is just for the appearance. And you can see with this hour hand, just how sensitive the bluing process is to a temperature differential. 06:38 The final surface finish comes from using diamantine powder on a tin lap. Again with short moves to maintain the flat surfaces. 07:51 It pulls the last of the solvent residue from the surface, and leaves the parts quite clean. And you'll notice that I don't touch the parts with bare hands from here on, until the bluing is finished, to maintain that clean surface. 08:40 If the color has any sort of flaw, like for example you can see that the very tip of this hour hand doesn't quite go fully blue, then the part must be taken back to the previous polishing stage. 09:11 There are also several other factors that can affect the outcome too, beyond what I've mentioned here, including the composition of the steel, the ambient conditions, as well as the nature of the light being used to illuminating the part. All of this can be experimented with to further improve the final result. References: Hardening, Tempering and Heat Treatment (Workshop Practice) http://www.amazon.com/Hardening-Tempering-Treatment-Workshop-Practice/dp/0852428375 Heat Bluing A Set Of Steel Clock Hands, by Clickspring. -
3:59Adele - Set Fire To The Rain (Live at The Royal Albert Hall)
Adele - Set Fire To The Rain (Live at The Royal Albert Hall)Adele - Set Fire To The Rain (Live at The Royal Albert Hall)
Music video by Adele performing Set Fire To The Rain. (C) 2011 XL Recordings Ltd -
4:00Adele - Set Fire to the Rain Lyrics
Adele - Set Fire to the Rain LyricsAdele - Set Fire to the Rain Lyrics
Song: Set Fire to the Rain Artitst: Adele All Rights Are to the Original Owners (not me) One of my favorites from Adele's latest album 21 Disclaimer: None of this is mine. All is Adele's did the best I could do with the lyrics. Mistakes happen, if you find one feel free to drop it in the comment box. Enjoy! -
17:06The Span of a Set of Vectors
The Span of a Set of VectorsThe Span of a Set of Vectors
Need a LIVE tutor to help answer a question? Check out the people at http://www.tutor.com/signup?AdDist=1&ExAdId;=90fddaff-89aa-4a4f-91da-90841e168246&TDC;_OfferCode=e2bf363b-0cb8-4635-98c3-2b5211d0847a&subject;=math&grade;=undefined for a FREE 30 minute session! The Span of a Set of Vectors. In this video, I look at the notion of a span of a vector set. I work in R2 just to keep things simple, but the results can be generalized! I show how to justify that two vectors do in fact span all of R2. -
3:03Spare Parts #10 - Making A Set Of Reusable Emery Sticks
Spare Parts #10 - Making A Set Of Reusable Emery SticksSpare Parts #10 - Making A Set Of Reusable Emery Sticks
Making A Set Of Reusable Emery Sticks, by Clickspring This is such a simple idea, but I remember when a clockmaker friend first showed it to me, I thought "Wow, that's genius!". It's so simple to do, and ensures that you use your emery paper efficiently. If you would like to help support the creation of these videos, then head on over to the Clickspring Patreon page: https://www.patreon.com/clickspring Ask Me A Question: http://www.clickspringprojects.com/contact.html Follow Clickspring: https://www.patreon.com/clickspring http://www.facebook.com/Clickspring1 http://plus.google.com/u/0/113668471124073837794/posts http://instagram.com/clickspring1/ https://www.tumblr.com/blog/clickspring1 https://www.pinterest.com/clickspring1 Transcript: 00:06 Using an emery stick on the lathe is a great way to take care of the final surface finish of a part. 00:11 The sticks are available commercially, but they are a bit expensive to buy, so here's a way to make a good quality version of your own. Take a sheet of emery paper, place it grit side up on the bench, and then put a strip of masking tape on 2 sides. 00:30 Flip it over, and then place a wooden handle squarely across the end of the paper, like this. Now score the edge of the paper as you roll it onto the handle. 00:41 I like to use the back side of a trimming blade, because it scores the paper well, but doesn't cut through it. 00:47 As you fold, pull the paper tightly onto the handle, and then seal the tape at each end after each turn. This helps keep the paper tight on the stick, and leaves a nice crisp corner. 00:58 The wood I'm using is a piece of oak trimming from the hardware store, and it works great for the sort of work that I do, but you can adapt the idea to use the size or density of wood that best suits your needs. As you load up a side of paper, it can simply be torn off to reveal a fresh surface. 01:20 And if all has gone well fitting the paper to the stick, you'll always have a crisp corners exposed as you tear off the old paper. Make one for each grit stage that you use, and then put them somewhere convenient for easy access. 01:37 For those parts that need a harder backing to the emery paper, an alternative is to use something a little more solid, like this shop made brass polisher. 01:46.380,0:01:50.850 The harder backing will reduce its tendency to round edges. Spray Adhesive is perfect for bonding the emery paper in place, and then it can be trimmed to size. 02:06 Now it's not quite as convenient as the wood backed version, but it's perfect for those parts where you really want to avoid rounding the profile. 02:18 The hard backing can be scaled to suit the size of the parts that you work on, and be sure to always fit a proper handle to it when using it on the lathe. Making A Set Of Reusable Emery Sticks, by Clickspring. -
11:44Basis for a Set of Vectors
Basis for a Set of VectorsBasis for a Set of Vectors
Basis for a Set of Vectors. In this video, I give the definition for a apos; basis apos; of a set of vectors. I think proceed to work an example that shows three vectors that I picked form a basis for R_3. -
4:22Adele - Set Fire To The Rain (Karaoke Version)
Adele - Set Fire To The Rain (Karaoke Version)Adele - Set Fire To The Rain (Karaoke Version)
To ensure that you never miss a brand new hit song, please subscribe to the Sing King Karaoke channel here: http://bit.ly/119sKFQ Learn your favourite songs and sing along to them in style with Sing King Karaoke - your number one source for YouTube karaoke and lyrics. You can also find us on: Facebook - http://on.fb.me/189zrPZ Twitter - http://bit.ly/ImhTEt Google+ - http://bit.ly/1eP2bg1 Instagram: http://bit.ly/Singstagram Snapchat: SingKingKaraoke If you wish to use our music in your own YouTube videos, all we ask is that you leave a link to our channel and credit to Sing King for the instrumental in your video description. We also love to check out as many fan videos as possible, so feel free to send us a link for your covers :) -
2:05Twin Sisters Each Give Birth to a Set of Twins for The Second Time
Twin Sisters Each Give Birth to a Set of Twins for The Second TimeTwin Sisters Each Give Birth to a Set of Twins for The Second Time
Defying all the odds, identical twin sisters Kerri Bunker and Kelli Wall from Utah, gave birth to sets of twins for the second time each. Wall gave birth to her pair eight weeks early and Bunker's arrived a month before their due date. Each set of twins and their mothers are doing great and are perfectly healthy. Bunker admitted that she and her husband were in shock when they heard the news. Wall and her husband wanted another child and couldn't believe she was having doubles again. -
12:06Home Machine Shop Tool Making - Machining A Set Of Vintage Style Rope Knurls
Home Machine Shop Tool Making - Machining A Set Of Vintage Style Rope KnurlsHome Machine Shop Tool Making - Machining A Set Of Vintage Style Rope Knurls
Machining A Set Of Vintage Style Rope Knurls, by Clickspring In this video I make a set of classic rope knurling wheels, to put some ornamental rope knurl patterns on some of my future projects. There's plenty of lathe and mill work, as well as a bit of hand finishing with a fine cut file. This is the main video in a series of at least 3, that will relate to the subject of creating these beautiful rope knurl patterns. Be sure to check out the other videos when you get a chance. The other two videos in this little series are: Spare Parts #5 - Making A Bump Style Knurling Tool Holder: https://www.youtube.com/watch?v=TyN1VBgv5cQ Spare Parts #4 - Making, Hardening And Tempering A Form Tool For The Lathe: https://www.youtube.com/watch?v=nZsnGhwsjjo Free plans for the double angled cutter, and form tool: http://www.clickspringprojects.com/uploads/3/8/2/2/38221101/double_angled_cutter.pdf http://www.clickspringprojects.com/uploads/3/8/2/2/38221101/form_tool_profile.pdf If you would like to help support the creation of these videos, then head on over to the Clickspring Patreon page: https://www.patreon.com/clickspring Ask Me A Question: http://www.clickspringprojects.com/contact.html Follow Clickspring: https://www.patreon.com/clickspring http://www.facebook.com/Clickspring1 http://plus.google.com/u/0/113668471124073837794/posts http://instagram.com/clickspring1/ https://www.tumblr.com/blog/clickspring1 https://www.pinterest.com/clickspring1 Abbreviated Transcript: 00:31 The rope pattern is formed by a knurling wheel that looks like this, that has a number of fine teeth around its perimeter. Now to form those teeth, I'm going to use an additional cutter that looks like this. 00:44 Each tooth on this cutter has a 90 degree V profile, and there are 4 teeth milled around a central axis. There's relief at the back of each tooth, and the cutting rake angle will be generated by milling past the tool centerline. I'll be using some of this EN8 steel to make both the cutter and the knurl. 02:43 After finding the edge of the work, I positioned this end mill, the correct distance past the centerline, and then set about milling the gaps between the teeth. For this part of the job I'm using the simple indexing plate of the dividing head, thats just behind the chuck. 03:32 For the cutter to work correctly, the back side of each tooth needs to be relieved, so I'll be removing this little corner of metal here on each tooth, and shaping it to blend with the back surface. 04:20 But I thought it might be worth showing what happens to the steel if nothing is done to protect it while its heated, so I've wrapped the working end of the cutter as usual, but I've left the chucking end uncoated, and exposed to the torch flame. With nothing to stop the oxidation, the unprotected end has formed a thick black scale, while the protected end is mostly free from scale, and looking quite bright. 05:39 Now you'll have noticed that the knurl teeth are cut on an angle to the body of the knurl, which means that the knurl blanks need to somehow be securely presented at an angle to the cutter. I could have simply cut them while they were still attached to the parent stock, but I figured since I was making a few of them, a dedicated holder would be bit more efficient, and I can keep it for when I make more in the future. So I made this arbor to hold them on the mill. 07:47 Back onto the mill, the work was again secured in the dividing head, and then tilted to an angle of 30 degrees. I took some time to cutter was carefully positioned against the work, to make sure it was centered on the blank, and then the teeth were cut into the knurl. 08:19 For this particular knurl I indexed for 40 teeth, which was simply one turn of the handwheel on the dividing head, for each cut. Now the quality of the cut was a little rougher than I would have liked, so I gave it another pass without hanging the depth, and that seemed to clean it up. 08:56 With that first one complete, I used a few different angles, as well as index counts, to make the full set of 5 knurls, which will give me a good range of different rope knurl patterns. Each of those knurls was quench hardened and then tempered. So that's a set of rope knurls complete and ready for use, so let's give them a run. 09:41 Bump style knurling tools generate an enormous side force on the work, so tailstock support definitely helps. And even with this support, the work still deflects quite a lot as the pattern is formed. 10:24 Now I didn't make any effort to calculate the correct diameter to avoid double tracking, in fact I was surprised to find that it wasn't really necessary. In no time at all the knurl cut its way down to a diameter that worked, and the pattern started to jump out. References: Frank Ford (Luthier/Machinist) http://www.frets.com/HomeShopTech/Projects/RopeKnurl/ropeknurl.html Machining A Set Of Vintage Style Rope Knurls, by Clickspring -
15:53How To Build a Set of Modern Chairs - Solid Walnut & Zebrawood
How To Build a Set of Modern Chairs - Solid Walnut & ZebrawoodHow To Build a Set of Modern Chairs - Solid Walnut & Zebrawood
The chairs come together in this video and we focus on the tools, measurements, and woodworking tips needed to do this project yourself. While the chair design is very modern, the techniques shown can be used in just about any chair design project. Facebook: https://www.facebook.com/pages/Art-Home-by-Jon-Peters/312021729836 Check out our new website: http://jonpeters.com/ -
7:33Holy Spirit / Set a Fire (Bryan & Katie Torwalt/Will Reagan & United Pursuit) cover by Sarah Reeves
Holy Spirit / Set a Fire (Bryan & Katie Torwalt/Will Reagan & United Pursuit) cover by Sarah ReevesHoly Spirit / Set a Fire (Bryan & Katie Torwalt/Will Reagan & United Pursuit) cover by Sarah Reeves
I love these worship songs together. I pray it blesses you! DOWNLOAD ON iTUNES: https://itunes.apple.com/us/album/holy-spirit-set-a-fire/id849087422?i=849087580 SUBSCRIBE! http://www.youtube.com/user/SarahReev... FOLLOW ME: http://www.twitter.com/sarahreeves http://www.facebook.com/sarahreevesmusic Instagram: @sarahreevesmusic WEBSITE: www.sarahreevesmusic.com CONTACT: info@sarahreevesmusic.com BOOKING: To book Sarah for your event please contact info@sarahreevesmusic.com
- Bring-in
- Bug (poker)
- Card game
- Casino
- Casino token
- Community card
- Community card poker
- Deck (cards)
- Draw poker
- Five of a kind
- Five-card draw
- Frequency
- High card by suit
- Joker (playing card)
- Kicker (poker)
- List of poker hands
- List of poker terms
- Lowball (poker)
- Omaha hold 'em
- Outline of poker
- Permutation
- Poker
- Poker dice
- Poker probability
- Poker psychology
- Probability
- Razz (poker)
- Seven-card stud
- Shuffle
- Stripped deck
- Stud poker
- Suit (cards)
- Texas hold 'em
- Texas Hold 'em
- Wild card (poker)
A-Set
ALBUMS
- Songs from the Red Room released: 1999
Songs from the Red Room
Released 1999- add to main playlist Play in Full Screen Blue Line
- add to main playlist Play in Full Screen A Day And The Weight
- add to main playlist Play in Full Screen Discount Highway
- add to main playlist Play in Full Screen Pick-A-Lie
- add to main playlist Play in Full Screen Among Strangers
- add to main playlist Play in Full Screen 110°
- add to main playlist Play in Full Screen Swallow
- add to main playlist Play in Full Screen Blizzard Of '99
- add to main playlist Play in Full Screen Blue Girl
- add to main playlist Play in Full Screen Of Not Forgetting
- add to main playlist Play in Full Screen One Of Many
- add to main playlist Play in Full Screen Tomorrow Today
A-Set
ALBUMS
- A Deadly Past Raises the Future released: 2005
A Deadly Past Raises the Future
Released 2005- add to main playlist Play in Full Screen Anachronic Being
- add to main playlist Play in Full Screen When the Sky Gets Darker
- add to main playlist Play in Full Screen Looking Back Again
- add to main playlist Play in Full Screen Unfulfilled Needs
- add to main playlist Play in Full Screen h.A Bit
- add to main playlist Play in Full Screen Do Not Talk (Rule of the Game)
- add to main playlist Play in Full Screen Command Me
- add to main playlist Play in Full Screen Running the Minddrome
- add to main playlist Play in Full Screen Core of Exhaustion (2004)
- add to main playlist Play in Full Screen Set in Motion
- add to main playlist Play in Full Screen Dopamine Stimuli
- add to main playlist Play in Full Screen Into the Core
-
Soulja Boy: My Publicist’s Arrest Was A Set Up
Soulja Boy tells our photo that him and his team were setup when cops raided his dressing room and now his publicist is paying for it. -
A-SET Robotics, Microprocessor 8085 Lecture 1
A Complete series of Lecture on Microprocessor and its working. Lecturer : Diwakar Vaish Topic : 8085 Microprocessor ( A Part of 4 Year Robotics Course) A-SET is India's first and only Institution that has been doing extensieve research over Humanoid Robots. We are providing training to top Institution all across India including IIT's. Our course material Includes Electronics of Robotics Programming of Robotics Kinematics Physical Dynamics Motion Planning Machine learning and AI etc. -
Set A Fire - Jesus Culture w/ Lyrics
Set A Fire by Jesus Culture with lyrics. This video is good to use for both personal and group worship! God Bless! -
Spare Parts #12 - Heat Bluing A Set Of Steel Clock Hands
Heat Bluing A Set Of Steel Clock Hands, by Clickspring. In this video I go through the process of bluing a set of steel clock hands. Heat bluing of small steel parts is a key element of traditional clock and watchmaking. It can transform the appearance of even the most mundane parts, and is also believed to afford the parts a small measure of corrosion resistance. The rest of the process for making the hands and motion work of the current clock project can be found here: https://TBA If you would like to help support the creation of these videos, then head on over to the Clickspring Patreon page: https://www.patreon.com/clickspring ________________________________________________________ A very special thank you to patrons KayKey From Norway, and Dan Keen. _____________________________... -
Adele - Set Fire To The Rain (Live at The Royal Albert Hall)
Music video by Adele performing Set Fire To The Rain. (C) 2011 XL Recordings Ltd -
Adele - Set Fire to the Rain Lyrics
Song: Set Fire to the Rain Artitst: Adele All Rights Are to the Original Owners (not me) One of my favorites from Adele's latest album 21 Disclaimer: None of this is mine. All is Adele's did the best I could do with the lyrics. Mistakes happen, if you find one feel free to drop it in the comment box. Enjoy! -
The Span of a Set of Vectors
Need a LIVE tutor to help answer a question? Check out the people at http://www.tutor.com/signup?AdDist=1&ExAdId;=90fddaff-89aa-4a4f-91da-90841e168246&TDC;_OfferCode=e2bf363b-0cb8-4635-98c3-2b5211d0847a&subject;=math&grade;=undefined for a FREE 30 minute session! The Span of a Set of Vectors. In this video, I look at the notion of a span of a vector set. I work in R2 just to keep things simple, but the results can be generalized! I show how to justify that two vectors do in fact span all of R2. -
Spare Parts #10 - Making A Set Of Reusable Emery Sticks
Making A Set Of Reusable Emery Sticks, by Clickspring This is such a simple idea, but I remember when a clockmaker friend first showed it to me, I thought "Wow, that's genius!". It's so simple to do, and ensures that you use your emery paper efficiently. If you would like to help support the creation of these videos, then head on over to the Clickspring Patreon page: https://www.patreon.com/clickspring Ask Me A Question: http://www.clickspringprojects.com/contact.html Follow Clickspring: https://www.patreon.com/clickspring http://www.facebook.com/Clickspring1 http://plus.google.com/u/0/113668471124073837794/posts http://instagram.com/clickspring1/ https://www.tumblr.com/blog/clickspring1 https://www.pinterest.com/clickspring1 Transcript: 00:06 Using an emery stick on the lathe is a g... -
Basis for a Set of Vectors
Basis for a Set of Vectors. In this video, I give the definition for a apos; basis apos; of a set of vectors. I think proceed to work an example that shows three vectors that I picked form a basis for R_3. -
Adele - Set Fire To The Rain (Karaoke Version)
To ensure that you never miss a brand new hit song, please subscribe to the Sing King Karaoke channel here: http://bit.ly/119sKFQ Learn your favourite songs and sing along to them in style with Sing King Karaoke - your number one source for YouTube karaoke and lyrics. You can also find us on: Facebook - http://on.fb.me/189zrPZ Twitter - http://bit.ly/ImhTEt Google+ - http://bit.ly/1eP2bg1 Instagram: http://bit.ly/Singstagram Snapchat: SingKingKaraoke If you wish to use our music in your own YouTube videos, all we ask is that you leave a link to our channel and credit to Sing King for the instrumental in your video description. We also love to check out as many fan videos as possible, so feel free to send us a link for your covers :) -
Twin Sisters Each Give Birth to a Set of Twins for The Second Time
Defying all the odds, identical twin sisters Kerri Bunker and Kelli Wall from Utah, gave birth to sets of twins for the second time each. Wall gave birth to her pair eight weeks early and Bunker's arrived a month before their due date. Each set of twins and their mothers are doing great and are perfectly healthy. Bunker admitted that she and her husband were in shock when they heard the news. Wall and her husband wanted another child and couldn't believe she was having doubles again. -
Home Machine Shop Tool Making - Machining A Set Of Vintage Style Rope Knurls
Machining A Set Of Vintage Style Rope Knurls, by Clickspring In this video I make a set of classic rope knurling wheels, to put some ornamental rope knurl patterns on some of my future projects. There's plenty of lathe and mill work, as well as a bit of hand finishing with a fine cut file. This is the main video in a series of at least 3, that will relate to the subject of creating these beautiful rope knurl patterns. Be sure to check out the other videos when you get a chance. The other two videos in this little series are: Spare Parts #5 - Making A Bump Style Knurling Tool Holder: https://www.youtube.com/watch?v=TyN1VBgv5cQ Spare Parts #4 - Making, Hardening And Tempering A Form Tool For The Lathe: https://www.youtube.com/watch?v=nZsnGhwsjjo Free plans for the double angled cutter,... -
How To Build a Set of Modern Chairs - Solid Walnut & Zebrawood
The chairs come together in this video and we focus on the tools, measurements, and woodworking tips needed to do this project yourself. While the chair design is very modern, the techniques shown can be used in just about any chair design project. Facebook: https://www.facebook.com/pages/Art-Home-by-Jon-Peters/312021729836 Check out our new website: http://jonpeters.com/ -
Holy Spirit / Set a Fire (Bryan & Katie Torwalt/Will Reagan & United Pursuit) cover by Sarah Reeves
I love these worship songs together. I pray it blesses you! DOWNLOAD ON iTUNES: https://itunes.apple.com/us/album/holy-spirit-set-a-fire/id849087422?i=849087580 SUBSCRIBE! http://www.youtube.com/user/SarahReev... FOLLOW ME: http://www.twitter.com/sarahreeves http://www.facebook.com/sarahreevesmusic Instagram: @sarahreevesmusic WEBSITE: www.sarahreevesmusic.com CONTACT: info@sarahreevesmusic.com BOOKING: To book Sarah for your event please contact info@sarahreevesmusic.com -
Forming a set of cement steps, (part two)
Process for laying out, designing and building concrete steps. (Part two pouring concrete)2 of 2 -
-
-
Duke Dumont spins a set on Z103.5!
Duke Dumont dropped by the Z103.5 studios on April 26th, 2014 for a talk with Tony Monaco and to spin a deep set full of hits! -
-
How to Prove a Set is a Subspace of a Vector Space
How to Prove a Set is a Subspace of a Vector Space -
A Set of Large Waves at The Wedge - 07/25/09
High surf warning for southern California was issued during the week, with the waves peaking on Saturday the 25th. Friday, July 24, 2009, body surfer Monte Valantin, 50, was killed from the dangerous surf conditions at The Wedge. On Saturday, Balboa Island/Peninsula was overrun with beachgoers heading to The Wedge to watch the huge waves. Lines for the auto ferry(0:06) to get to the peninsula side were hours long (even for the pedestrians!) due to one of the three ferry boats being run aground and put out of commission several days earlier. The entrance to The Wedge was coned off to automobiles, and was inundated by bicycles and pedestrians(0:11). On the beach were hundreds of spectators watching the body surfers challenge waves that were so huge that the water surge would... -
Building A Film Set From Start To Finish
"eye of the GNARwhal" is a segment that takes you a little deeper into my life. I have been filming random shenanigans since I was in 8th grade and there is a lot of stuff that I think is interesting and good content, but doesn't necessarily fall under the criteria of a viral video. These are those videos that I think you subscribers will still enjoy. It may sometimes be in a vlog style, it may be an action sports or high adventure edit, it could very possibly be a compilation of random crap, but no matter what they'll be here, waiting for your view. Do you want to be Totally RAD!? Follow us on facebook and instagram! facebook.com/wearetotallyrad instagram : milesmortensen song : Bridges artist : Wasatch https://www.facebook.com/wasatchband www.totallyradclothing.com For any licensing... -
Sick of being single? Get yourself a SET OF THESE!!! | Family Feud
Okay, what other plastic surgery might a guy tell his wife to get if he was feeling brave? SUBSCRIBE: http://bit.ly/FamilyFeudSub FACEBOOK: http://www.facebook.com/FamilyFeud INSTAGRAM: http://instagram.com/familyfeud TWITTER: http://www.twitter.com/FamilyFeud WEBSITE: http://www.familyfeud.com
Soulja Boy: My Publicist’s Arrest Was A Set Up
- Order: Reorder
- Duration: 1:17
- Updated: 03 Apr 2016
- views: 1064
Soulja Boy tells our photo that him and his team were setup when cops raided his dressing room and now his publicist is paying for it.
Soulja Boy tells our photo that him and his team were setup when cops raided his dressing room and now his publicist is paying for it.
wn.com/Soulja Boy My Publicist’S Arrest Was A Set Up
Soulja Boy tells our photo that him and his team were setup when cops raided his dressing room and now his publicist is paying for it.
- published: 03 Apr 2016
- views: 1064
A-SET Robotics, Microprocessor 8085 Lecture 1
- Order: Reorder
- Duration: 50:37
- Updated: 30 Sep 2012
- views: 38682
A Complete series of Lecture on Microprocessor and its working.
Lecturer : Diwakar Vaish
Topic : 8085 Microprocessor ( A Part of 4 Year Robotics Course)
A-SE...
A Complete series of Lecture on Microprocessor and its working.
Lecturer : Diwakar Vaish
Topic : 8085 Microprocessor ( A Part of 4 Year Robotics Course)
A-SET is India's first and only Institution that has been doing extensieve research over Humanoid Robots. We are providing training to top Institution all across India including IIT's.
Our course material Includes
Electronics of Robotics
Programming of Robotics
Kinematics
Physical Dynamics
Motion Planning
Machine learning and AI
etc.
wn.com/A Set Robotics, Microprocessor 8085 Lecture 1
A Complete series of Lecture on Microprocessor and its working.
Lecturer : Diwakar Vaish
Topic : 8085 Microprocessor ( A Part of 4 Year Robotics Course)
A-SET is India's first and only Institution that has been doing extensieve research over Humanoid Robots. We are providing training to top Institution all across India including IIT's.
Our course material Includes
Electronics of Robotics
Programming of Robotics
Kinematics
Physical Dynamics
Motion Planning
Machine learning and AI
etc.
- published: 30 Sep 2012
- views: 38682
Set A Fire - Jesus Culture w/ Lyrics
- Order: Reorder
- Duration: 4:38
- Updated: 25 Nov 2012
- views: 6194081
Set A Fire by Jesus Culture with lyrics. This video is good to use for both personal and group worship! God Bless!
Set A Fire by Jesus Culture with lyrics. This video is good to use for both personal and group worship! God Bless!
wn.com/Set A Fire Jesus Culture W Lyrics
Set A Fire by Jesus Culture with lyrics. This video is good to use for both personal and group worship! God Bless!
- published: 25 Nov 2012
- views: 6194081
Spare Parts #12 - Heat Bluing A Set Of Steel Clock Hands
- Order: Reorder
- Duration: 10:16
- Updated: 20 Mar 2016
- views: 317
Heat Bluing A Set Of Steel Clock Hands, by Clickspring.
In this video I go through the process of bluing a set of steel clock hands.
Heat bluing of small stee...
Heat Bluing A Set Of Steel Clock Hands, by Clickspring.
In this video I go through the process of bluing a set of steel clock hands.
Heat bluing of small steel parts is a key element of traditional clock and watchmaking. It can transform the appearance of even the most mundane parts, and is also believed to afford the parts a small measure of corrosion resistance.
The rest of the process for making the hands and motion work of the current clock project can be found here: https://TBA
If you would like to help support the creation of these videos, then head on over to the Clickspring Patreon page: https://www.patreon.com/clickspring
________________________________________________________
A very special thank you to patrons KayKey From Norway, and Dan Keen.
________________________________________________________
Ask Me A Question:
http://www.clickspringprojects.com/contact.html
Follow Clickspring:
https://www.patreon.com/clickspring
http://www.facebook.com/Clickspring1
http://plus.google.com/u/0/113668471124073837794/posts
http://instagram.com/clickspring1/
https://www.tumblr.com/blog/clickspring1
https://www.pinterest.com/clickspring1
Abbreviated Transcript:
00:17 Generally its presented as 4 steps - Harden the part, Heat temper it to Blue, Polish the surfaces, and then Heat again for a cosmetic blue. But first things first, what is it about heating steel that makes it turn blue?
00:50 When full spectrum light strikes the surface, some is directly reflected by that oxide, and some passes through and is reflected by the underlying metal, and so travels a tiny bit further. The two waveforms are now slightly out of phase, and interact as they leave the upper surface.
01:06 Depending on the thickness of the film, some colors are cancelled, and what we see are those colors that remain. When the film is thin, we see a pale straw color. As the film gets thicker other colors are removed, and color we see gradually shifts from brown through purple to a rich blue.
01:24 This is known as thin film interference; its what causes the rainbow of colors in soap bubbles, and a very similar effect generates those fantastic iridescent colors you can see on some birds and insects.
01:37 In our case if we get everything right, the result is a magical deep blue color on our steel part, that no other process can quite match. And I should also mention that the result is not just a pretty blue color, but also a very reliable proxy for determining temperature, which we use during the tempering process in a moment.
01:55 So with a bit of the science behind the process in hand, we can make a few statements about what factors will affect the quality of the final blue color we're pursuing. For one thing it seems reasonable to expect that a uniform oxide thickness would give a uniform color, so it follows that we'll want to heat the part as uniformly as we can. I've made a dedicated set of bluing tools.
02:31 Any sort of contamination will not only affect
the way the oxide forms, but also the light reflection, so we want the work to be meticulously clean just before we start heating. Hardened steel will take a mirror polish much more readily than a soft steel. So the first step is to harden the work.
03:52 Once finished, that boric acid coating comes off very easily with a little boiling water. Now at the moment, the parts are glass hard, and much too fragile to be safely handled without risking breaking them, so I need to temper that hardness.
04:43 As it happens the temperature we want to temper
the work to, corresponds to the blue oxide color, a little over 300 degrees celcius, which is why you see the steel blued twice - once is for this tempering, and the second time at the very end, is just for the appearance. And you can see with this hour hand, just how sensitive the bluing process is to a temperature differential.
06:38 The final surface finish comes from using diamantine powder on a tin lap. Again with short moves to maintain the flat surfaces.
07:51 It pulls the last of the solvent residue from the surface, and leaves the parts quite clean. And you'll notice that I don't touch the parts with bare hands from here on, until the bluing is finished, to maintain that clean surface.
08:40 If the color has any sort of flaw, like for example you can see that the very tip of this hour hand doesn't quite go fully blue, then the part must be taken back to the previous polishing stage.
09:11 There are also several other factors that can affect the outcome too, beyond what I've mentioned here, including the composition of the steel, the ambient conditions, as well as the nature of the light being used to illuminating the part. All of this can be experimented with to further improve the final result.
References:
Hardening, Tempering and Heat Treatment (Workshop Practice)
http://www.amazon.com/Hardening-Tempering-Treatment-Workshop-Practice/dp/0852428375
Heat Bluing A Set Of Steel Clock Hands, by Clickspring.
wn.com/Spare Parts 12 Heat Bluing A Set Of Steel Clock Hands
Heat Bluing A Set Of Steel Clock Hands, by Clickspring.
In this video I go through the process of bluing a set of steel clock hands.
Heat bluing of small steel parts is a key element of traditional clock and watchmaking. It can transform the appearance of even the most mundane parts, and is also believed to afford the parts a small measure of corrosion resistance.
The rest of the process for making the hands and motion work of the current clock project can be found here: https://TBA
If you would like to help support the creation of these videos, then head on over to the Clickspring Patreon page: https://www.patreon.com/clickspring
________________________________________________________
A very special thank you to patrons KayKey From Norway, and Dan Keen.
________________________________________________________
Ask Me A Question:
http://www.clickspringprojects.com/contact.html
Follow Clickspring:
https://www.patreon.com/clickspring
http://www.facebook.com/Clickspring1
http://plus.google.com/u/0/113668471124073837794/posts
http://instagram.com/clickspring1/
https://www.tumblr.com/blog/clickspring1
https://www.pinterest.com/clickspring1
Abbreviated Transcript:
00:17 Generally its presented as 4 steps - Harden the part, Heat temper it to Blue, Polish the surfaces, and then Heat again for a cosmetic blue. But first things first, what is it about heating steel that makes it turn blue?
00:50 When full spectrum light strikes the surface, some is directly reflected by that oxide, and some passes through and is reflected by the underlying metal, and so travels a tiny bit further. The two waveforms are now slightly out of phase, and interact as they leave the upper surface.
01:06 Depending on the thickness of the film, some colors are cancelled, and what we see are those colors that remain. When the film is thin, we see a pale straw color. As the film gets thicker other colors are removed, and color we see gradually shifts from brown through purple to a rich blue.
01:24 This is known as thin film interference; its what causes the rainbow of colors in soap bubbles, and a very similar effect generates those fantastic iridescent colors you can see on some birds and insects.
01:37 In our case if we get everything right, the result is a magical deep blue color on our steel part, that no other process can quite match. And I should also mention that the result is not just a pretty blue color, but also a very reliable proxy for determining temperature, which we use during the tempering process in a moment.
01:55 So with a bit of the science behind the process in hand, we can make a few statements about what factors will affect the quality of the final blue color we're pursuing. For one thing it seems reasonable to expect that a uniform oxide thickness would give a uniform color, so it follows that we'll want to heat the part as uniformly as we can. I've made a dedicated set of bluing tools.
02:31 Any sort of contamination will not only affect
the way the oxide forms, but also the light reflection, so we want the work to be meticulously clean just before we start heating. Hardened steel will take a mirror polish much more readily than a soft steel. So the first step is to harden the work.
03:52 Once finished, that boric acid coating comes off very easily with a little boiling water. Now at the moment, the parts are glass hard, and much too fragile to be safely handled without risking breaking them, so I need to temper that hardness.
04:43 As it happens the temperature we want to temper
the work to, corresponds to the blue oxide color, a little over 300 degrees celcius, which is why you see the steel blued twice - once is for this tempering, and the second time at the very end, is just for the appearance. And you can see with this hour hand, just how sensitive the bluing process is to a temperature differential.
06:38 The final surface finish comes from using diamantine powder on a tin lap. Again with short moves to maintain the flat surfaces.
07:51 It pulls the last of the solvent residue from the surface, and leaves the parts quite clean. And you'll notice that I don't touch the parts with bare hands from here on, until the bluing is finished, to maintain that clean surface.
08:40 If the color has any sort of flaw, like for example you can see that the very tip of this hour hand doesn't quite go fully blue, then the part must be taken back to the previous polishing stage.
09:11 There are also several other factors that can affect the outcome too, beyond what I've mentioned here, including the composition of the steel, the ambient conditions, as well as the nature of the light being used to illuminating the part. All of this can be experimented with to further improve the final result.
References:
Hardening, Tempering and Heat Treatment (Workshop Practice)
http://www.amazon.com/Hardening-Tempering-Treatment-Workshop-Practice/dp/0852428375
Heat Bluing A Set Of Steel Clock Hands, by Clickspring.
- published: 20 Mar 2016
- views: 317
Adele - Set Fire To The Rain (Live at The Royal Albert Hall)
- Order: Reorder
- Duration: 3:59
- Updated: 16 Nov 2011
- views: 216419792
Music video by Adele performing Set Fire To The Rain. (C) 2011 XL Recordings Ltd
- published: 16 Nov 2011
- views: 216419792
Adele - Set Fire to the Rain Lyrics
- Order: Reorder
- Duration: 4:00
- Updated: 23 Feb 2011
- views: 332631193
Song: Set Fire to the Rain
Artitst: Adele
All Rights Are to the Original Owners (not me)
One of my favorites from Adele's latest album 21
Disclaimer: None...
Song: Set Fire to the Rain
Artitst: Adele
All Rights Are to the Original Owners (not me)
One of my favorites from Adele's latest album 21
Disclaimer: None of this is mine. All is Adele's
did the best I could do with the lyrics. Mistakes happen, if you find one feel free to drop it in the comment box. Enjoy!
wn.com/Adele Set Fire To The Rain Lyrics
Song: Set Fire to the Rain
Artitst: Adele
All Rights Are to the Original Owners (not me)
One of my favorites from Adele's latest album 21
Disclaimer: None of this is mine. All is Adele's
did the best I could do with the lyrics. Mistakes happen, if you find one feel free to drop it in the comment box. Enjoy!
- published: 23 Feb 2011
- views: 332631193
The Span of a Set of Vectors
- Order: Reorder
- Duration: 17:06
- Updated: 26 Aug 2011
- views: 352233
Need a LIVE tutor to help answer a question? Check out the people at http://www.tutor.com/signup?AdDist=1&ExAdId;=90fddaff-89aa-4a4f-91da-90841e168246&TDC;_OfferC...
Need a LIVE tutor to help answer a question? Check out the people at http://www.tutor.com/signup?AdDist=1&ExAdId;=90fddaff-89aa-4a4f-91da-90841e168246&TDC;_OfferCode=e2bf363b-0cb8-4635-98c3-2b5211d0847a&subject;=math&grade;=undefined for a FREE 30 minute session!
The Span of a Set of Vectors. In this video, I look at the notion of a span of a vector set. I work in R2 just to keep things simple, but the results can be generalized! I show how to justify that two vectors do in fact span all of R2.
wn.com/The Span Of A Set Of Vectors
Need a LIVE tutor to help answer a question? Check out the people at http://www.tutor.com/signup?AdDist=1&ExAdId;=90fddaff-89aa-4a4f-91da-90841e168246&TDC;_OfferCode=e2bf363b-0cb8-4635-98c3-2b5211d0847a&subject;=math&grade;=undefined for a FREE 30 minute session!
The Span of a Set of Vectors. In this video, I look at the notion of a span of a vector set. I work in R2 just to keep things simple, but the results can be generalized! I show how to justify that two vectors do in fact span all of R2.
- published: 26 Aug 2011
- views: 352233
Spare Parts #10 - Making A Set Of Reusable Emery Sticks
- Order: Reorder
- Duration: 3:03
- Updated: 06 Dec 2015
- views: 113313
Making A Set Of Reusable Emery Sticks, by Clickspring
This is such a simple idea, but I remember when a clockmaker friend first showed it to me, I thought "Wow...
Making A Set Of Reusable Emery Sticks, by Clickspring
This is such a simple idea, but I remember when a clockmaker friend first showed it to me, I thought "Wow, that's genius!". It's so simple to do, and ensures that you use your emery paper efficiently.
If you would like to help support the creation of these videos, then head on over to the Clickspring Patreon page: https://www.patreon.com/clickspring
Ask Me A Question:
http://www.clickspringprojects.com/contact.html
Follow Clickspring:
https://www.patreon.com/clickspring
http://www.facebook.com/Clickspring1
http://plus.google.com/u/0/113668471124073837794/posts
http://instagram.com/clickspring1/
https://www.tumblr.com/blog/clickspring1
https://www.pinterest.com/clickspring1
Transcript:
00:06 Using an emery stick on the lathe is a great way to take care of the final surface finish of a part.
00:11 The sticks are available commercially, but they are a bit expensive to buy, so here's a way to make a good quality version of your own. Take a sheet of emery paper, place it grit side up on the bench, and then put a strip of masking tape on 2 sides.
00:30 Flip it over, and then place a wooden handle squarely across the end of the paper, like this. Now score the edge of the paper as you roll it onto the handle.
00:41 I like to use the back side of a trimming blade, because it scores the paper well, but doesn't cut through it.
00:47 As you fold, pull the paper tightly onto the handle, and then seal the tape at each end after each turn. This helps keep the paper tight on the stick, and leaves a nice crisp corner.
00:58 The wood I'm using is a piece of oak trimming from the hardware store, and it works great for the sort of work that I do, but you can adapt the idea to use the size or density of wood that best suits your needs. As you load up a side of paper, it can simply be torn off to reveal a fresh surface.
01:20 And if all has gone well fitting the paper to the stick, you'll always have a crisp corners exposed as you tear off the old paper. Make one for each grit stage that you use, and then put them somewhere convenient for easy access.
01:37 For those parts that need a harder backing to the emery paper, an alternative is to use something a little more solid, like this shop made brass polisher.
01:46.380,0:01:50.850
The harder backing will reduce its tendency to round edges. Spray Adhesive is perfect for bonding the emery paper in place, and then it can be trimmed to size.
02:06 Now it's not quite as convenient as the wood backed version, but it's perfect for those parts where you really want to avoid rounding the profile.
02:18 The hard backing can be scaled to suit the
size of the parts that you work on, and be sure to always fit a proper handle to it when using it on the lathe.
Making A Set Of Reusable Emery Sticks, by Clickspring.
wn.com/Spare Parts 10 Making A Set Of Reusable Emery Sticks
Making A Set Of Reusable Emery Sticks, by Clickspring
This is such a simple idea, but I remember when a clockmaker friend first showed it to me, I thought "Wow, that's genius!". It's so simple to do, and ensures that you use your emery paper efficiently.
If you would like to help support the creation of these videos, then head on over to the Clickspring Patreon page: https://www.patreon.com/clickspring
Ask Me A Question:
http://www.clickspringprojects.com/contact.html
Follow Clickspring:
https://www.patreon.com/clickspring
http://www.facebook.com/Clickspring1
http://plus.google.com/u/0/113668471124073837794/posts
http://instagram.com/clickspring1/
https://www.tumblr.com/blog/clickspring1
https://www.pinterest.com/clickspring1
Transcript:
00:06 Using an emery stick on the lathe is a great way to take care of the final surface finish of a part.
00:11 The sticks are available commercially, but they are a bit expensive to buy, so here's a way to make a good quality version of your own. Take a sheet of emery paper, place it grit side up on the bench, and then put a strip of masking tape on 2 sides.
00:30 Flip it over, and then place a wooden handle squarely across the end of the paper, like this. Now score the edge of the paper as you roll it onto the handle.
00:41 I like to use the back side of a trimming blade, because it scores the paper well, but doesn't cut through it.
00:47 As you fold, pull the paper tightly onto the handle, and then seal the tape at each end after each turn. This helps keep the paper tight on the stick, and leaves a nice crisp corner.
00:58 The wood I'm using is a piece of oak trimming from the hardware store, and it works great for the sort of work that I do, but you can adapt the idea to use the size or density of wood that best suits your needs. As you load up a side of paper, it can simply be torn off to reveal a fresh surface.
01:20 And if all has gone well fitting the paper to the stick, you'll always have a crisp corners exposed as you tear off the old paper. Make one for each grit stage that you use, and then put them somewhere convenient for easy access.
01:37 For those parts that need a harder backing to the emery paper, an alternative is to use something a little more solid, like this shop made brass polisher.
01:46.380,0:01:50.850
The harder backing will reduce its tendency to round edges. Spray Adhesive is perfect for bonding the emery paper in place, and then it can be trimmed to size.
02:06 Now it's not quite as convenient as the wood backed version, but it's perfect for those parts where you really want to avoid rounding the profile.
02:18 The hard backing can be scaled to suit the
size of the parts that you work on, and be sure to always fit a proper handle to it when using it on the lathe.
Making A Set Of Reusable Emery Sticks, by Clickspring.
- published: 06 Dec 2015
- views: 113313
Basis for a Set of Vectors
- Order: Reorder
- Duration: 11:44
- Updated: 09 Sep 2011
- views: 175655
Basis for a Set of Vectors. In this video, I give the definition for a apos; basis apos; of a set of vectors. I think proceed to work an example that shows thre...
Basis for a Set of Vectors. In this video, I give the definition for a apos; basis apos; of a set of vectors. I think proceed to work an example that shows three vectors that I picked form a basis for R_3.
wn.com/Basis For A Set Of Vectors
Basis for a Set of Vectors. In this video, I give the definition for a apos; basis apos; of a set of vectors. I think proceed to work an example that shows three vectors that I picked form a basis for R_3.
- published: 09 Sep 2011
- views: 175655
Adele - Set Fire To The Rain (Karaoke Version)
- Order: Reorder
- Duration: 4:22
- Updated: 29 Jul 2015
- views: 1198701
To ensure that you never miss a brand new hit song, please subscribe to the Sing King Karaoke channel here: http://bit.ly/119sKFQ
Learn your favourite songs ...
To ensure that you never miss a brand new hit song, please subscribe to the Sing King Karaoke channel here: http://bit.ly/119sKFQ
Learn your favourite songs and sing along to them in style with Sing King Karaoke - your number one source for YouTube karaoke and lyrics.
You can also find us on:
Facebook - http://on.fb.me/189zrPZ
Twitter - http://bit.ly/ImhTEt
Google+ - http://bit.ly/1eP2bg1
Instagram: http://bit.ly/Singstagram
Snapchat: SingKingKaraoke
If you wish to use our music in your own YouTube videos, all we ask is that you leave a link to our channel and credit to Sing King for the instrumental in your video description. We also love to check out as many fan videos as possible, so feel free to send us a link for your covers :)
wn.com/Adele Set Fire To The Rain (Karaoke Version)
To ensure that you never miss a brand new hit song, please subscribe to the Sing King Karaoke channel here: http://bit.ly/119sKFQ
Learn your favourite songs and sing along to them in style with Sing King Karaoke - your number one source for YouTube karaoke and lyrics.
You can also find us on:
Facebook - http://on.fb.me/189zrPZ
Twitter - http://bit.ly/ImhTEt
Google+ - http://bit.ly/1eP2bg1
Instagram: http://bit.ly/Singstagram
Snapchat: SingKingKaraoke
If you wish to use our music in your own YouTube videos, all we ask is that you leave a link to our channel and credit to Sing King for the instrumental in your video description. We also love to check out as many fan videos as possible, so feel free to send us a link for your covers :)
- published: 29 Jul 2015
- views: 1198701
Twin Sisters Each Give Birth to a Set of Twins for The Second Time
- Order: Reorder
- Duration: 2:05
- Updated: 22 Feb 2016
- views: 1170
Defying all the odds, identical twin sisters Kerri Bunker and Kelli Wall from Utah, gave birth to sets of twins for the second time each. Wall gave birth to her...
Defying all the odds, identical twin sisters Kerri Bunker and Kelli Wall from Utah, gave birth to sets of twins for the second time each. Wall gave birth to her pair eight weeks early and Bunker's arrived a month before their due date. Each set of twins and their mothers are doing great and are perfectly healthy. Bunker admitted that she and her husband were in shock when they heard the news. Wall and her husband wanted another child and couldn't believe she was having doubles again.
wn.com/Twin Sisters Each Give Birth To A Set Of Twins For The Second Time
Defying all the odds, identical twin sisters Kerri Bunker and Kelli Wall from Utah, gave birth to sets of twins for the second time each. Wall gave birth to her pair eight weeks early and Bunker's arrived a month before their due date. Each set of twins and their mothers are doing great and are perfectly healthy. Bunker admitted that she and her husband were in shock when they heard the news. Wall and her husband wanted another child and couldn't believe she was having doubles again.
- published: 22 Feb 2016
- views: 1170
Home Machine Shop Tool Making - Machining A Set Of Vintage Style Rope Knurls
- Order: Reorder
- Duration: 12:06
- Updated: 21 Sep 2015
- views: 277044
Machining A Set Of Vintage Style Rope Knurls, by Clickspring
In this video I make a set of classic rope knurling wheels, to put some ornamental rope knurl patt...
Machining A Set Of Vintage Style Rope Knurls, by Clickspring
In this video I make a set of classic rope knurling wheels, to put some ornamental rope knurl patterns on some of my future projects. There's plenty of lathe and mill work, as well as a bit of hand finishing with a fine cut file.
This is the main video in a series of at least 3, that will relate to the subject of creating these beautiful rope knurl patterns. Be sure to check out the other videos when you get a chance.
The other two videos in this little series are:
Spare Parts #5 - Making A Bump Style Knurling Tool Holder: https://www.youtube.com/watch?v=TyN1VBgv5cQ
Spare Parts #4 - Making, Hardening And Tempering A Form Tool For The Lathe: https://www.youtube.com/watch?v=nZsnGhwsjjo
Free plans for the double angled cutter, and form tool:
http://www.clickspringprojects.com/uploads/3/8/2/2/38221101/double_angled_cutter.pdf
http://www.clickspringprojects.com/uploads/3/8/2/2/38221101/form_tool_profile.pdf
If you would like to help support the creation of these videos, then head on over to the Clickspring Patreon page: https://www.patreon.com/clickspring
Ask Me A Question:
http://www.clickspringprojects.com/contact.html
Follow Clickspring:
https://www.patreon.com/clickspring
http://www.facebook.com/Clickspring1
http://plus.google.com/u/0/113668471124073837794/posts
http://instagram.com/clickspring1/
https://www.tumblr.com/blog/clickspring1
https://www.pinterest.com/clickspring1
Abbreviated Transcript:
00:31 The rope pattern is formed by a knurling wheel that looks like this, that has a number of fine teeth around its perimeter. Now to form those teeth, I'm going to use an additional cutter that looks like this.
00:44 Each tooth on this cutter has a 90 degree V profile, and there are 4 teeth milled around a central axis. There's relief at the back of each tooth, and the cutting rake angle will be generated by milling past the tool centerline. I'll be using some of this EN8 steel to make both the cutter and the knurl.
02:43 After finding the edge of the work, I positioned this end mill, the correct distance past the centerline, and then set about milling the gaps between the teeth. For this part of the job I'm using the simple indexing plate of the dividing head, thats just behind the chuck.
03:32 For the cutter to work correctly, the back side of each tooth needs to be relieved, so I'll be removing this little corner of metal here on each tooth, and shaping it to blend with the back surface.
04:20 But I thought it might be worth showing what happens to the steel if nothing is done to protect it while its heated, so I've wrapped the working end of the cutter as usual, but I've left the chucking end uncoated, and exposed to the torch flame. With nothing to stop the oxidation, the unprotected end has formed a thick black scale, while the protected end is mostly free from scale, and looking quite bright.
05:39 Now you'll have noticed that the knurl teeth are cut on an angle to the body of the knurl, which means that the knurl blanks need to somehow be securely presented at an angle to the cutter. I could have simply cut them while they were still attached to the parent stock, but I figured since I was making a few of them, a dedicated holder would be bit more efficient, and I can keep it for when I make more in the future. So I made this arbor to hold them on the mill.
07:47 Back onto the mill, the work was again secured in the dividing head, and then tilted to an angle of 30 degrees. I took some time to cutter was carefully positioned against the work, to make sure it was centered on the blank, and then the teeth were cut into the knurl.
08:19 For this particular knurl I indexed for 40 teeth, which was simply one turn of the handwheel on the dividing head, for each cut. Now the quality of the cut was a little rougher than I would have liked, so I gave it another pass without hanging the depth, and that seemed to clean it up.
08:56 With that first one complete, I used a few different angles, as well as index counts, to make the full set of 5 knurls, which will give me a good range of different rope knurl patterns. Each of those knurls was quench hardened and then tempered. So that's a set of rope knurls complete and ready for use, so let's give them a run.
09:41 Bump style knurling tools generate an enormous side force on the work, so tailstock support definitely helps. And even with this support, the work still deflects quite a lot as the pattern is formed.
10:24 Now I didn't make any effort to calculate the correct diameter to avoid double tracking, in fact I was surprised to find that it wasn't really necessary. In no time at all the knurl cut its way down to a diameter that worked, and the pattern started to jump out.
References:
Frank Ford (Luthier/Machinist)
http://www.frets.com/HomeShopTech/Projects/RopeKnurl/ropeknurl.html
Machining A Set Of Vintage Style Rope Knurls, by Clickspring
wn.com/Home Machine Shop Tool Making Machining A Set Of Vintage Style Rope Knurls
Machining A Set Of Vintage Style Rope Knurls, by Clickspring
In this video I make a set of classic rope knurling wheels, to put some ornamental rope knurl patterns on some of my future projects. There's plenty of lathe and mill work, as well as a bit of hand finishing with a fine cut file.
This is the main video in a series of at least 3, that will relate to the subject of creating these beautiful rope knurl patterns. Be sure to check out the other videos when you get a chance.
The other two videos in this little series are:
Spare Parts #5 - Making A Bump Style Knurling Tool Holder: https://www.youtube.com/watch?v=TyN1VBgv5cQ
Spare Parts #4 - Making, Hardening And Tempering A Form Tool For The Lathe: https://www.youtube.com/watch?v=nZsnGhwsjjo
Free plans for the double angled cutter, and form tool:
http://www.clickspringprojects.com/uploads/3/8/2/2/38221101/double_angled_cutter.pdf
http://www.clickspringprojects.com/uploads/3/8/2/2/38221101/form_tool_profile.pdf
If you would like to help support the creation of these videos, then head on over to the Clickspring Patreon page: https://www.patreon.com/clickspring
Ask Me A Question:
http://www.clickspringprojects.com/contact.html
Follow Clickspring:
https://www.patreon.com/clickspring
http://www.facebook.com/Clickspring1
http://plus.google.com/u/0/113668471124073837794/posts
http://instagram.com/clickspring1/
https://www.tumblr.com/blog/clickspring1
https://www.pinterest.com/clickspring1
Abbreviated Transcript:
00:31 The rope pattern is formed by a knurling wheel that looks like this, that has a number of fine teeth around its perimeter. Now to form those teeth, I'm going to use an additional cutter that looks like this.
00:44 Each tooth on this cutter has a 90 degree V profile, and there are 4 teeth milled around a central axis. There's relief at the back of each tooth, and the cutting rake angle will be generated by milling past the tool centerline. I'll be using some of this EN8 steel to make both the cutter and the knurl.
02:43 After finding the edge of the work, I positioned this end mill, the correct distance past the centerline, and then set about milling the gaps between the teeth. For this part of the job I'm using the simple indexing plate of the dividing head, thats just behind the chuck.
03:32 For the cutter to work correctly, the back side of each tooth needs to be relieved, so I'll be removing this little corner of metal here on each tooth, and shaping it to blend with the back surface.
04:20 But I thought it might be worth showing what happens to the steel if nothing is done to protect it while its heated, so I've wrapped the working end of the cutter as usual, but I've left the chucking end uncoated, and exposed to the torch flame. With nothing to stop the oxidation, the unprotected end has formed a thick black scale, while the protected end is mostly free from scale, and looking quite bright.
05:39 Now you'll have noticed that the knurl teeth are cut on an angle to the body of the knurl, which means that the knurl blanks need to somehow be securely presented at an angle to the cutter. I could have simply cut them while they were still attached to the parent stock, but I figured since I was making a few of them, a dedicated holder would be bit more efficient, and I can keep it for when I make more in the future. So I made this arbor to hold them on the mill.
07:47 Back onto the mill, the work was again secured in the dividing head, and then tilted to an angle of 30 degrees. I took some time to cutter was carefully positioned against the work, to make sure it was centered on the blank, and then the teeth were cut into the knurl.
08:19 For this particular knurl I indexed for 40 teeth, which was simply one turn of the handwheel on the dividing head, for each cut. Now the quality of the cut was a little rougher than I would have liked, so I gave it another pass without hanging the depth, and that seemed to clean it up.
08:56 With that first one complete, I used a few different angles, as well as index counts, to make the full set of 5 knurls, which will give me a good range of different rope knurl patterns. Each of those knurls was quench hardened and then tempered. So that's a set of rope knurls complete and ready for use, so let's give them a run.
09:41 Bump style knurling tools generate an enormous side force on the work, so tailstock support definitely helps. And even with this support, the work still deflects quite a lot as the pattern is formed.
10:24 Now I didn't make any effort to calculate the correct diameter to avoid double tracking, in fact I was surprised to find that it wasn't really necessary. In no time at all the knurl cut its way down to a diameter that worked, and the pattern started to jump out.
References:
Frank Ford (Luthier/Machinist)
http://www.frets.com/HomeShopTech/Projects/RopeKnurl/ropeknurl.html
Machining A Set Of Vintage Style Rope Knurls, by Clickspring
- published: 21 Sep 2015
- views: 277044
How To Build a Set of Modern Chairs - Solid Walnut & Zebrawood
- Order: Reorder
- Duration: 15:53
- Updated: 09 Aug 2014
- views: 392449
The chairs come together in this video and we focus on the tools, measurements, and woodworking tips needed to do this project yourself. While the chair design...
The chairs come together in this video and we focus on the tools, measurements, and woodworking tips needed to do this project yourself. While the chair design is very modern, the techniques shown can be used in just about any chair design project.
Facebook: https://www.facebook.com/pages/Art-Home-by-Jon-Peters/312021729836
Check out our new website: http://jonpeters.com/
wn.com/How To Build A Set Of Modern Chairs Solid Walnut Zebrawood
The chairs come together in this video and we focus on the tools, measurements, and woodworking tips needed to do this project yourself. While the chair design is very modern, the techniques shown can be used in just about any chair design project.
Facebook: https://www.facebook.com/pages/Art-Home-by-Jon-Peters/312021729836
Check out our new website: http://jonpeters.com/
- published: 09 Aug 2014
- views: 392449
Holy Spirit / Set a Fire (Bryan & Katie Torwalt/Will Reagan & United Pursuit) cover by Sarah Reeves
- Order: Reorder
- Duration: 7:33
- Updated: 26 Jan 2014
- views: 1026649
I love these worship songs together. I pray it blesses you!
DOWNLOAD ON iTUNES: https://itunes.apple.com/us/album/holy-spirit-set-a-fire/id849087422?i=8490875...
I love these worship songs together. I pray it blesses you!
DOWNLOAD ON iTUNES: https://itunes.apple.com/us/album/holy-spirit-set-a-fire/id849087422?i=849087580
SUBSCRIBE!
http://www.youtube.com/user/SarahReev...
FOLLOW ME:
http://www.twitter.com/sarahreeves
http://www.facebook.com/sarahreevesmusic
Instagram: @sarahreevesmusic
WEBSITE: www.sarahreevesmusic.com
CONTACT: info@sarahreevesmusic.com
BOOKING: To book Sarah for your event please contact info@sarahreevesmusic.com
wn.com/Holy Spirit Set A Fire (Bryan Katie Torwalt Will Reagan United Pursuit) Cover By Sarah Reeves
I love these worship songs together. I pray it blesses you!
DOWNLOAD ON iTUNES: https://itunes.apple.com/us/album/holy-spirit-set-a-fire/id849087422?i=849087580
SUBSCRIBE!
http://www.youtube.com/user/SarahReev...
FOLLOW ME:
http://www.twitter.com/sarahreeves
http://www.facebook.com/sarahreevesmusic
Instagram: @sarahreevesmusic
WEBSITE: www.sarahreevesmusic.com
CONTACT: info@sarahreevesmusic.com
BOOKING: To book Sarah for your event please contact info@sarahreevesmusic.com
- published: 26 Jan 2014
- views: 1026649
Forming a set of cement steps, (part two)
- Order: Reorder
- Duration: 9:22
- Updated: 29 Aug 2012
- views: 279296
Process for laying out, designing and building concrete steps. (Part two pouring concrete)2 of 2
Process for laying out, designing and building concrete steps. (Part two pouring concrete)2 of 2
wn.com/Forming A Set Of Cement Steps, (Part Two)
Process for laying out, designing and building concrete steps. (Part two pouring concrete)2 of 2
- published: 29 Aug 2012
- views: 279296
Procedure to Find a Basis for a Set of Vectors
- Order: Reorder
- Duration: 7:17
- Updated: 12 Sep 2011
- views: 181649
Procedure to Find a Basis for a Set of Vectors. In this video, I start with a set of vectors in R_3 and find a basis for those vectors. The basis is NOT neces...
Procedure to Find a Basis for a Set of Vectors. In this video, I start with a set of vectors in R_3 and find a basis for those vectors. The basis is NOT necessarily unique!
wn.com/Procedure To Find A Basis For A Set Of Vectors
Building a set of timber stairs
- Order: Reorder
- Duration: 3:35
- Updated: 05 Jun 2011
- views: 427624
Duke Dumont spins a set on Z103.5!
- Order: Reorder
- Duration: 34:23
- Updated: 29 Apr 2014
- views: 47937
Duke Dumont dropped by the Z103.5 studios on April 26th, 2014 for a talk with Tony Monaco and to spin a deep set full of hits!
Duke Dumont dropped by the Z103.5 studios on April 26th, 2014 for a talk with Tony Monaco and to spin a deep set full of hits!
wn.com/Duke Dumont Spins A Set On Z103.5
Duke Dumont dropped by the Z103.5 studios on April 26th, 2014 for a talk with Tony Monaco and to spin a deep set full of hits!
- published: 29 Apr 2014
- views: 47937
Building a Set in 4 Hours (Timelapse) - UC Irvine
- Order: Reorder
- Duration: 3:09
- Updated: 25 May 2013
- views: 3106
1 Class.
14 Students.
4 Hours.
$0 Budget.
Here's a timelapse of our Video Stage Production (Studio Art 81B) class building a set to shoot on over the weekend. ...
1 Class.
14 Students.
4 Hours.
$0 Budget.
Here's a timelapse of our Video Stage Production (Studio Art 81B) class building a set to shoot on over the weekend.
Song: Nostrand
Artist: Ratatat
wn.com/Building A Set In 4 Hours (Timelapse) Uc Irvine
How to Prove a Set is a Subspace of a Vector Space
- Order: Reorder
- Duration: 5:58
- Updated: 23 Dec 2014
- views: 20303
How to Prove a Set is a Subspace of a Vector Space
How to Prove a Set is a Subspace of a Vector Space
wn.com/How To Prove A Set Is A Subspace Of A Vector Space
A Set of Large Waves at The Wedge - 07/25/09
- Order: Reorder
- Duration: 5:53
- Updated: 26 Jul 2009
- views: 1005343
High surf warning for southern California was issued during the week, with the waves peaking on Saturday the 25th.
Friday, July 24, 2009, body surfer Monte...
High surf warning for southern California was issued during the week, with the waves peaking on Saturday the 25th.
Friday, July 24, 2009, body surfer Monte Valantin, 50, was killed from the dangerous surf conditions at The Wedge.
On Saturday, Balboa Island/Peninsula was overrun with beachgoers heading to The Wedge to watch the huge waves. Lines for the auto ferry(0:06) to get to the peninsula side were hours long (even for the pedestrians!) due to one of the three ferry boats being run aground and put out of commission several days earlier.
The entrance to The Wedge was coned off to automobiles, and was inundated by bicycles and pedestrians(0:11).
On the beach were hundreds of spectators watching the body surfers challenge waves that were so huge that the water surge would occasionally spill over the crest of the beach(4:10)! Lifeguards can be heard telling everyone to move back.
Apologies for all the wind noise.
wn.com/A Set Of Large Waves At The Wedge 07 25 09
High surf warning for southern California was issued during the week, with the waves peaking on Saturday the 25th.
Friday, July 24, 2009, body surfer Monte Valantin, 50, was killed from the dangerous surf conditions at The Wedge.
On Saturday, Balboa Island/Peninsula was overrun with beachgoers heading to The Wedge to watch the huge waves. Lines for the auto ferry(0:06) to get to the peninsula side were hours long (even for the pedestrians!) due to one of the three ferry boats being run aground and put out of commission several days earlier.
The entrance to The Wedge was coned off to automobiles, and was inundated by bicycles and pedestrians(0:11).
On the beach were hundreds of spectators watching the body surfers challenge waves that were so huge that the water surge would occasionally spill over the crest of the beach(4:10)! Lifeguards can be heard telling everyone to move back.
Apologies for all the wind noise.
- published: 26 Jul 2009
- views: 1005343
Building A Film Set From Start To Finish
- Order: Reorder
- Duration: 4:50
- Updated: 19 Jan 2015
- views: 12345
"eye of the GNARwhal" is a segment that takes you a little deeper into my life. I have been filming random shenanigans since I was in 8th grade and there is a l...
"eye of the GNARwhal" is a segment that takes you a little deeper into my life. I have been filming random shenanigans since I was in 8th grade and there is a lot of stuff that I think is interesting and good content, but doesn't necessarily fall under the criteria of a viral video. These are those videos that I think you subscribers will still enjoy. It may sometimes be in a vlog style, it may be an action sports or high adventure edit, it could very possibly be a compilation of random crap, but no matter what they'll be here, waiting for your view.
Do you want to be Totally RAD!? Follow us on facebook and instagram!
facebook.com/wearetotallyrad
instagram : milesmortensen
song : Bridges
artist : Wasatch
https://www.facebook.com/wasatchband
www.totallyradclothing.com
For any licensing or business related questions email me at miles.totallyrad@gmail.com
wn.com/Building A Film Set From Start To Finish
"eye of the GNARwhal" is a segment that takes you a little deeper into my life. I have been filming random shenanigans since I was in 8th grade and there is a lot of stuff that I think is interesting and good content, but doesn't necessarily fall under the criteria of a viral video. These are those videos that I think you subscribers will still enjoy. It may sometimes be in a vlog style, it may be an action sports or high adventure edit, it could very possibly be a compilation of random crap, but no matter what they'll be here, waiting for your view.
Do you want to be Totally RAD!? Follow us on facebook and instagram!
facebook.com/wearetotallyrad
instagram : milesmortensen
song : Bridges
artist : Wasatch
https://www.facebook.com/wasatchband
www.totallyradclothing.com
For any licensing or business related questions email me at miles.totallyrad@gmail.com
- published: 19 Jan 2015
- views: 12345
Sick of being single? Get yourself a SET OF THESE!!! | Family Feud
- Order: Reorder
- Duration: 1:20
- Updated: 18 Feb 2016
- views: 36857
Okay, what other plastic surgery might a guy tell his wife to get if he was feeling brave?
SUBSCRIBE: http://bit.ly/FamilyFeudSub
FACEBOOK: http://www.facebook...
Okay, what other plastic surgery might a guy tell his wife to get if he was feeling brave?
SUBSCRIBE: http://bit.ly/FamilyFeudSub
FACEBOOK: http://www.facebook.com/FamilyFeud
INSTAGRAM: http://instagram.com/familyfeud
TWITTER: http://www.twitter.com/FamilyFeud
WEBSITE: http://www.familyfeud.com
wn.com/Sick Of Being Single Get Yourself A Set Of These | Family Feud
Okay, what other plastic surgery might a guy tell his wife to get if he was feeling brave?
SUBSCRIBE: http://bit.ly/FamilyFeudSub
FACEBOOK: http://www.facebook.com/FamilyFeud
INSTAGRAM: http://instagram.com/familyfeud
TWITTER: http://www.twitter.com/FamilyFeud
WEBSITE: http://www.familyfeud.com
- published: 18 Feb 2016
- views: 36857
-
Chick-fil-A set to open on the eastside
Chick-fil-A set to open on the eastside -
Emptying a dispenser after a set amount of items loaded
I wanted a way to empty a dispense once it got to a certain level of full. After not being able to find something online I thought I would give it a shot. The result is super bulky and I would like to optimize it, but I'm not sure how at this time -
Waiting on a set in Cloverdale!
I was working on yet another film production in cloverdale which is in Surrey, BC, Canada &yeh; watch ~~ https://www.instagram.com/karenconlan11/ https://twitter.com/karen_conlan11 https://twitter.com/karenconlan11 I created this video with the YouTube Video Editor (https://www.youtube.com/editor) -
How to put a set change on
Sorry about the sniffling😃 -
Linda Cardellini - I love to work on a set whether it's mostly ...
I love to work on a set whether it's mostly men or mostly women, but there's something about being in a community of women. I was extremely close with my parents. I like diversity; I want one character to be very different from the next. Before I could talk, I would try to sing. Yes, I'm very close to my family. And being that close to your family, I think you also struggle with how to become your own person. After I finished 'E.R.', I wanted to concentrate on re-examining what kind of actress I am and taking time for real-life things. -
a set diet to lose weight fast
66674 -
Building a Set - Smokey Joe's Cafe
Smokey Joe's Cafe at Town Hall Arts Center April 1 – May 1, 2016 Words and Music by Jerry Leiber and Mike Stoller Directed and Choreographed by Matthew D. Peters The longest running musical revue in Broadway history, Smokey Joe’s Cafe is a song and dance revue showcasing 39 pop standards, including Love Potion #9, On Broadway, I’m a Woman, Yakety Yak, and more rock and roll, rhythm and blues songs written by songwriters Jerry Leiber and Mike Stoller. http://www.townhallartscenter.org/main-stage-shows/smokey-joes-cafe/ -
FREE INSTAGRAM GIVEAWAY // WIN A SET BY LENSTAB AND A PRINT
Hi guys! I am here with interesting news. In association with http://www.lenstab.com we have been putting together a giveaway where you can win a set and a print. Only until this Sunday 12pm EST. Head over to: https://www.instagram.com/wasteoffilm/ or @wasteoffilm to enter and get a chance to win! Amazon Affiliate: America: http://goo.gl/r6nlMr Germany: http://goo.gl/9zfiuh UK: http://goo.gl/XkFzmK Filmed with: Nikon D610: http://goo.gl/HDQhoX Nikon 50mm F1.8: http://goo.gl/Ioj3jZ Zoom H1: http://goo.gl/6kdUCx Sony Lavalier Mic: http://goo.gl/f5kJEo Lighting: http://amzn.to/1VYfT5l http://wasteoffilm.com http://timheubeck.bigcartel.com -
Gaming setup 2016(not really a set up)
-
I AM A SET DESIGNER THAT MEANS I LIVE IN A CRAZY FANTASY WORLD
CLICK HERE TO GET IT : http://tisfinger.com/mfyk8 -
Tutorial: How to describe a set of pictures with the crowd
You have thousands of images from a trap camera, microscope or an archive, and you need to describe them. You know that algorithms will do a poor job because the images are complex. And perhaps you have neither the time nor inclination to start writing computer programmes. So you want to recruit some volunteers to help as people like you will do a better job than computers alone. If this sounds familiar, then use the PYBOSSA's Flickr or Dropbox importer and start describing your images. We provide a ready-to-use template that provides a responsive interface, so your volunteers can even contribute from their phones or tablets. This video shows how you can create a project in a few minutes, and start working with the crowd. http://scifabric.com http://pybossa.com http://crowdcrafting.org ... -
Набор детской косметики Барби A set of children's cosmetics Barbie
Семейка Надом-с Semeika Nadom-s -
Build a set of ramps for your mower
A video on building ramps for your mower out of 2 1/2, 2x4's.Use them to change your blades, scrape the grass off the underside of the mower deck or anything that requires you to have your mower off the ground a little. This ramp (I only made one for demonstration purposes) is very easy to make and only takes a short time. At the end of the video I give you the cut list. -
What a set by William
-
how to go a set up
-
Tutorial: How to count the number of items from a set of pictures with the crowd
You have thousands of images from a trap camera, microscope or an archive, and you need to count the items that are shown on them. You know that algorithms will do a poor job because the images are complex. And perhaps you have neither the time nor inclination to start writing computer programmes. So you want to recruit some volunteers to help as people like you will do a better job than computers alone. If this sounds familiar, then use the PYBOSSA's Flickr or Dropbox importer and start counting items on your images. We provide a ready-to-use template that provides a responsive interface, so your volunteers can even contribute from their phones or tablets. This video shows how you can create a project in a few minutes, and start working with the crowd. http://scifabric.com http://pybos... -
Tutorial: How to classify a set of pictures with the crowd
You have thousands of images from a trap camera, microscope or an archive, and you need to classify them. You know that algorithms will do a poor job because the images are complex. And perhaps you have neither the time nor inclination to start writing computer programmes. So you want to recruit some volunteers to help as people like you will do a better job than computers alone. If this sounds familiar, then use the PYBOSSA's Flickr or Dropbox importer and start classifying, counting and describing your images. We provide a ready-to-use template that provides a responsive interface, so your volunteers can even contribute from their phones or tablets. This video shows how you can create a project in a few minutes, and start working with the crowd. Music: http://www.bensound.com -
Reached 7 chain ups in a set , target :20
-
"to reach a set standard" in Cantonese (達標) - Flashcard
[daat6 biu1] "to reach a set standard" in Cantonese (達標) Flashcard. -
16Apr02, A (set 2 @ 135)
-
16Apr02, A (set 2 @ 145)
-
16Apr02, A (set 2 @ 155)
-
Bishop Antonio Burroughs at the Faith Center - "It's A Set-Up!"
It does not matter what you are going through, "IT'S A SET-UP!!!" God's purpose is greater than the devils pursuit!!!
Chick-fil-A set to open on the eastside
- Order: Reorder
- Duration: 1:56
- Updated: 07 Apr 2016
- views: 5
Chick-fil-A set to open on the eastside
Chick-fil-A set to open on the eastside
wn.com/Chick Fil A Set To Open On The Eastside
Chick-fil-A set to open on the eastside
- published: 07 Apr 2016
- views: 5
Emptying a dispenser after a set amount of items loaded
- Order: Reorder
- Duration: 0:36
- Updated: 07 Apr 2016
- views: 10
I wanted a way to empty a dispense once it got to a certain level of full. After not being able to find something online I thought I would give it a shot.
Th...
I wanted a way to empty a dispense once it got to a certain level of full. After not being able to find something online I thought I would give it a shot.
The result is super bulky and I would like to optimize it, but I'm not sure how at this time
wn.com/Emptying A Dispenser After A Set Amount Of Items Loaded
I wanted a way to empty a dispense once it got to a certain level of full. After not being able to find something online I thought I would give it a shot.
The result is super bulky and I would like to optimize it, but I'm not sure how at this time
- published: 07 Apr 2016
- views: 10
Waiting on a set in Cloverdale!
- Order: Reorder
- Duration: 7:44
- Updated: 07 Apr 2016
- views: 4
I was working on yet another film production in cloverdale which is in Surrey, BC, Canada &yeh; watch ~~
https://www.instagram.com/karenconlan11/
https://twitt...
I was working on yet another film production in cloverdale which is in Surrey, BC, Canada &yeh; watch ~~
https://www.instagram.com/karenconlan11/
https://twitter.com/karen_conlan11
https://twitter.com/karenconlan11
I created this video with the YouTube Video Editor (https://www.youtube.com/editor)
wn.com/Waiting On A Set In Cloverdale
I was working on yet another film production in cloverdale which is in Surrey, BC, Canada &yeh; watch ~~
https://www.instagram.com/karenconlan11/
https://twitter.com/karen_conlan11
https://twitter.com/karenconlan11
I created this video with the YouTube Video Editor (https://www.youtube.com/editor)
- published: 07 Apr 2016
- views: 4
How to put a set change on
- Order: Reorder
- Duration: 5:12
- Updated: 06 Apr 2016
- views: 10
Sorry about the sniffling😃
Sorry about the sniffling😃
wn.com/How To Put A Set Change On
Linda Cardellini - I love to work on a set whether it's mostly ...
- Order: Reorder
- Duration: 1:34
- Updated: 06 Apr 2016
- views: 0
I love to work on a set whether it's mostly men or mostly women, but there's something about being in a community of women.
I was extremely close with my paren...
I love to work on a set whether it's mostly men or mostly women, but there's something about being in a community of women.
I was extremely close with my parents.
I like diversity; I want one character to be very different from the next.
Before I could talk, I would try to sing.
Yes, I'm very close to my family. And being that close to your family, I think you also struggle with how to become your own person.
After I finished 'E.R.', I wanted to concentrate on re-examining what kind of actress I am and taking time for real-life things.
wn.com/Linda Cardellini I Love To Work On A Set Whether It's Mostly ...
I love to work on a set whether it's mostly men or mostly women, but there's something about being in a community of women.
I was extremely close with my parents.
I like diversity; I want one character to be very different from the next.
Before I could talk, I would try to sing.
Yes, I'm very close to my family. And being that close to your family, I think you also struggle with how to become your own person.
After I finished 'E.R.', I wanted to concentrate on re-examining what kind of actress I am and taking time for real-life things.
- published: 06 Apr 2016
- views: 0
a set diet to lose weight fast
- Order: Reorder
- Duration: 2:22
- Updated: 06 Apr 2016
- views: 0
66674
66674
wn.com/A Set Diet To Lose Weight Fast
66674
- published: 06 Apr 2016
- views: 0
Building a Set - Smokey Joe's Cafe
- Order: Reorder
- Duration: 3:05
- Updated: 06 Apr 2016
- views: 8
Smokey Joe's Cafe at Town Hall Arts Center
April 1 – May 1, 2016
Words and Music by Jerry Leiber
and Mike Stoller
Directed and Choreographed
by Matthew D. Peter...
Smokey Joe's Cafe at Town Hall Arts Center
April 1 – May 1, 2016
Words and Music by Jerry Leiber
and Mike Stoller
Directed and Choreographed
by Matthew D. Peters
The longest running musical revue in Broadway history, Smokey Joe’s Cafe is a song and dance revue showcasing 39 pop standards, including Love Potion #9, On Broadway, I’m a Woman, Yakety Yak, and more rock and roll, rhythm and blues songs written by songwriters Jerry Leiber and Mike Stoller.
http://www.townhallartscenter.org/main-stage-shows/smokey-joes-cafe/
wn.com/Building A Set Smokey Joe's Cafe
Smokey Joe's Cafe at Town Hall Arts Center
April 1 – May 1, 2016
Words and Music by Jerry Leiber
and Mike Stoller
Directed and Choreographed
by Matthew D. Peters
The longest running musical revue in Broadway history, Smokey Joe’s Cafe is a song and dance revue showcasing 39 pop standards, including Love Potion #9, On Broadway, I’m a Woman, Yakety Yak, and more rock and roll, rhythm and blues songs written by songwriters Jerry Leiber and Mike Stoller.
http://www.townhallartscenter.org/main-stage-shows/smokey-joes-cafe/
- published: 06 Apr 2016
- views: 8
FREE INSTAGRAM GIVEAWAY // WIN A SET BY LENSTAB AND A PRINT
- Order: Reorder
- Duration: 0:44
- Updated: 06 Apr 2016
- views: 44
Hi guys! I am here with interesting news. In association with http://www.lenstab.com we have been putting together a giveaway where you can win a set and a prin...
Hi guys! I am here with interesting news. In association with http://www.lenstab.com we have been putting together a giveaway where you can win a set and a print.
Only until this Sunday 12pm EST.
Head over to: https://www.instagram.com/wasteoffilm/ or @wasteoffilm to enter and get a chance to win!
Amazon Affiliate:
America: http://goo.gl/r6nlMr
Germany: http://goo.gl/9zfiuh
UK: http://goo.gl/XkFzmK
Filmed with:
Nikon D610: http://goo.gl/HDQhoX
Nikon 50mm F1.8: http://goo.gl/Ioj3jZ
Zoom H1: http://goo.gl/6kdUCx
Sony Lavalier Mic: http://goo.gl/f5kJEo
Lighting: http://amzn.to/1VYfT5l
http://wasteoffilm.com
http://timheubeck.bigcartel.com
wn.com/Free Instagram Giveaway Win A Set By Lenstab And A Print
Hi guys! I am here with interesting news. In association with http://www.lenstab.com we have been putting together a giveaway where you can win a set and a print.
Only until this Sunday 12pm EST.
Head over to: https://www.instagram.com/wasteoffilm/ or @wasteoffilm to enter and get a chance to win!
Amazon Affiliate:
America: http://goo.gl/r6nlMr
Germany: http://goo.gl/9zfiuh
UK: http://goo.gl/XkFzmK
Filmed with:
Nikon D610: http://goo.gl/HDQhoX
Nikon 50mm F1.8: http://goo.gl/Ioj3jZ
Zoom H1: http://goo.gl/6kdUCx
Sony Lavalier Mic: http://goo.gl/f5kJEo
Lighting: http://amzn.to/1VYfT5l
http://wasteoffilm.com
http://timheubeck.bigcartel.com
- published: 06 Apr 2016
- views: 44
Gaming setup 2016(not really a set up)
- Order: Reorder
- Duration: 1:37
- Updated: 06 Apr 2016
- views: 2
- published: 06 Apr 2016
- views: 2
I AM A SET DESIGNER THAT MEANS I LIVE IN A CRAZY FANTASY WORLD
- Order: Reorder
- Duration: 1:10
- Updated: 06 Apr 2016
- views: 0
CLICK HERE TO GET IT : http://tisfinger.com/mfyk8
CLICK HERE TO GET IT : http://tisfinger.com/mfyk8
wn.com/I Am A Set Designer That Means I Live In A Crazy Fantasy World
Tutorial: How to describe a set of pictures with the crowd
- Order: Reorder
- Duration: 9:00
- Updated: 06 Apr 2016
- views: 11
You have thousands of images from a trap camera, microscope or an archive, and you need to describe them. You know that algorithms will do a poor job because th...
You have thousands of images from a trap camera, microscope or an archive, and you need to describe them. You know that algorithms will do a poor job because the images are complex. And perhaps you have neither the time nor inclination to start writing computer programmes. So you want to recruit some volunteers to help as people like you will do a better job than computers alone.
If this sounds familiar, then use the PYBOSSA's Flickr or Dropbox importer and start describing your images. We provide a ready-to-use template that provides a responsive interface, so your volunteers can even contribute from their phones or tablets.
This video shows how you can create a project in a few minutes, and start working with the crowd.
http://scifabric.com
http://pybossa.com
http://crowdcrafting.org
Music: http://www.bensound.com
wn.com/Tutorial How To Describe A Set Of Pictures With The Crowd
You have thousands of images from a trap camera, microscope or an archive, and you need to describe them. You know that algorithms will do a poor job because the images are complex. And perhaps you have neither the time nor inclination to start writing computer programmes. So you want to recruit some volunteers to help as people like you will do a better job than computers alone.
If this sounds familiar, then use the PYBOSSA's Flickr or Dropbox importer and start describing your images. We provide a ready-to-use template that provides a responsive interface, so your volunteers can even contribute from their phones or tablets.
This video shows how you can create a project in a few minutes, and start working with the crowd.
http://scifabric.com
http://pybossa.com
http://crowdcrafting.org
Music: http://www.bensound.com
- published: 06 Apr 2016
- views: 11
Набор детской косметики Барби A set of children's cosmetics Barbie
- Order: Reorder
- Duration: 11:27
- Updated: 06 Apr 2016
- views: 14
Семейка Надом-с Semeika Nadom-s
Семейка Надом-с Semeika Nadom-s
wn.com/Набор Детской Косметики Барби A Set Of Children's Cosmetics Barbie
Семейка Надом-с Semeika Nadom-s
- published: 06 Apr 2016
- views: 14
Build a set of ramps for your mower
- Order: Reorder
- Duration: 8:58
- Updated: 05 Apr 2016
- views: 18
A video on building ramps for your mower out of 2 1/2, 2x4's.Use them to change your blades, scrape the grass off the underside of the mower deck or anything th...
A video on building ramps for your mower out of 2 1/2, 2x4's.Use them to change your blades, scrape the grass off the underside of the mower deck or anything that requires you to have your mower off the ground a little. This ramp (I only made one for demonstration purposes) is very easy to make and only takes a short time. At the end of the video I give you the cut list.
wn.com/Build A Set Of Ramps For Your Mower
A video on building ramps for your mower out of 2 1/2, 2x4's.Use them to change your blades, scrape the grass off the underside of the mower deck or anything that requires you to have your mower off the ground a little. This ramp (I only made one for demonstration purposes) is very easy to make and only takes a short time. At the end of the video I give you the cut list.
- published: 05 Apr 2016
- views: 18
What a set by William
- Order: Reorder
- Duration: 0:23
- Updated: 05 Apr 2016
- views: 1075
- published: 05 Apr 2016
- views: 1075
how to go a set up
- Order: Reorder
- Duration: 3:25
- Updated: 05 Apr 2016
- views: 0
- published: 05 Apr 2016
- views: 0
Tutorial: How to count the number of items from a set of pictures with the crowd
- Order: Reorder
- Duration: 8:55
- Updated: 05 Apr 2016
- views: 8
You have thousands of images from a trap camera, microscope or an archive, and you need to count the items that are shown on them. You know that algorithms will...
You have thousands of images from a trap camera, microscope or an archive, and you need to count the items that are shown on them. You know that algorithms will do a poor job because the images are complex. And perhaps you have neither the time nor inclination to start writing computer programmes. So you want to recruit some volunteers to help as people like you will do a better job than computers alone.
If this sounds familiar, then use the PYBOSSA's Flickr or Dropbox importer and start counting items on your images. We provide a ready-to-use template that provides a responsive interface, so your volunteers can even contribute from their phones or tablets.
This video shows how you can create a project in a few minutes, and start working with the crowd.
http://scifabric.com
http://pybossa.com
http://crowdcrafting.org
Music: http://www.bensound.com
wn.com/Tutorial How To Count The Number Of Items From A Set Of Pictures With The Crowd
You have thousands of images from a trap camera, microscope or an archive, and you need to count the items that are shown on them. You know that algorithms will do a poor job because the images are complex. And perhaps you have neither the time nor inclination to start writing computer programmes. So you want to recruit some volunteers to help as people like you will do a better job than computers alone.
If this sounds familiar, then use the PYBOSSA's Flickr or Dropbox importer and start counting items on your images. We provide a ready-to-use template that provides a responsive interface, so your volunteers can even contribute from their phones or tablets.
This video shows how you can create a project in a few minutes, and start working with the crowd.
http://scifabric.com
http://pybossa.com
http://crowdcrafting.org
Music: http://www.bensound.com
- published: 05 Apr 2016
- views: 8
Tutorial: How to classify a set of pictures with the crowd
- Order: Reorder
- Duration: 7:40
- Updated: 05 Apr 2016
- views: 6
You have thousands of images from a trap camera, microscope or an archive, and you need to classify them. You know that algorithms will do a poor job because th...
You have thousands of images from a trap camera, microscope or an archive, and you need to classify them. You know that algorithms will do a poor job because the images are complex. And perhaps you have neither the time nor inclination to start writing computer programmes. So you want to recruit some volunteers to help as people like you will do a better job than computers alone.
If this sounds familiar, then use the PYBOSSA's Flickr or Dropbox importer and start classifying, counting and describing your images. We provide a ready-to-use template that provides a responsive interface, so your volunteers can even contribute from their phones or tablets.
This video shows how you can create a project in a few minutes, and start working with the crowd.
Music: http://www.bensound.com
wn.com/Tutorial How To Classify A Set Of Pictures With The Crowd
You have thousands of images from a trap camera, microscope or an archive, and you need to classify them. You know that algorithms will do a poor job because the images are complex. And perhaps you have neither the time nor inclination to start writing computer programmes. So you want to recruit some volunteers to help as people like you will do a better job than computers alone.
If this sounds familiar, then use the PYBOSSA's Flickr or Dropbox importer and start classifying, counting and describing your images. We provide a ready-to-use template that provides a responsive interface, so your volunteers can even contribute from their phones or tablets.
This video shows how you can create a project in a few minutes, and start working with the crowd.
Music: http://www.bensound.com
- published: 05 Apr 2016
- views: 6
Reached 7 chain ups in a set , target :20
- Order: Reorder
- Duration: 0:28
- Updated: 05 Apr 2016
- views: 0
- published: 05 Apr 2016
- views: 0
"to reach a set standard" in Cantonese (達標) - Flashcard
- Order: Reorder
- Duration: 0:19
- Updated: 05 Apr 2016
- views: 1
[daat6 biu1] "to reach a set standard" in Cantonese (達標) Flashcard.
[daat6 biu1] "to reach a set standard" in Cantonese (達標) Flashcard.
wn.com/To Reach A Set Standard In Cantonese (達標) Flashcard
16Apr02, A (set 2 @ 135)
- Order: Reorder
- Duration: 0:29
- Updated: 05 Apr 2016
- views: 0
- published: 05 Apr 2016
- views: 0
16Apr02, A (set 2 @ 145)
- Order: Reorder
- Duration: 0:29
- Updated: 05 Apr 2016
- views: 0
- published: 05 Apr 2016
- views: 0
16Apr02, A (set 2 @ 155)
- Order: Reorder
- Duration: 0:27
- Updated: 05 Apr 2016
- views: 0
- published: 05 Apr 2016
- views: 0
Bishop Antonio Burroughs at the Faith Center - "It's A Set-Up!"
- Order: Reorder
- Duration: 2:22
- Updated: 05 Apr 2016
- views: 37
It does not matter what you are going through, "IT'S A SET-UP!!!" God's purpose is greater than the devils pursuit!!!
It does not matter what you are going through, "IT'S A SET-UP!!!" God's purpose is greater than the devils pursuit!!!
wn.com/Bishop Antonio Burroughs At The Faith Center It's A Set Up
It does not matter what you are going through, "IT'S A SET-UP!!!" God's purpose is greater than the devils pursuit!!!
- published: 05 Apr 2016
- views: 37
-
Making a Set List // Jeremy Riddle
Welcome to the first WorshipU YouTube video series! We'll be giving you a sneak peek into what its like to be a WorshipU student. This is the first of 4 videos we will be releasing on "Worship Department Practicals" - with future lessons by Brian Johnson, Matt Stinton and Kristene DiMarco. In this first lesson, Jeremy discusses making a set list and figuring out the process of how to do it excellently. To explore of the student experience, you can start a 7-Day free trial at www.worshipu.com. -
MathFoundations150: What exactly is a set?
What exactly is a set?? This is a crucial question in the modern foundations of mathematics. Here we begin an examination of this thorny issue, first by discussing the usual English usage of the term, as well as alternate terms, such as collection, aggregate, bunch, class, menagerie etc that are often viewed as synonyms. While the term `set' as a collection of related objects is reasonably well-understood in everyday life, it turns out that defining what this means precisely involves overcoming a long list of challenges, some of which we lay out clearly in this video. After watching this lecture, you should henceforth be very skeptical about Cantor's `definition' of this term, and the modern wishy washy acceptance of this term . We will have a lot more critical things to say about mode... -
DJ Tutorial For The Beginner DJ - Creating a Set, Harmonic Mixing, Beats, Bars & Phrases
DJ Sos gives a few tips and techniques for the beginner DJ. These include how to create a set, counting beats, bars and phrases, harmonic mixing, blending and cutting. Here is a link to a site about harmonic mixing http://www.harmonic-mixing.com/ There are free programs that will put your music files into keys but you will have to search for them! -
Minecraft: All A Set Up?!?! - The Heist Custom Map [8]
Kevin ordered a Gameband and when I put it on, I get transported into a crazy game where I am a thief and have to hack into systems and try to escape cameras, guard robots, lasers and more! ➡ Next Episode : https://youtu.be/EV3D5CI-57c ➡ Minecraft The Heist Playlist: http://bit.ly/minecraft-heist ➡ About The Heist The Heist is one of the most advanced Minecraft maps ever made with over 6000 command blocks! This map is completely vanilla Minecraft, with no mods in 1.8.7! Download: http://www.curse.com/worlds/minecraft/232294-the-heist Cubehamster: https://www.youtube.com/user/Cubehamster Wubbi: https://www.youtube.com/user/WubbiConcepts Samasaurus6: https://www.youtube.com/user/Samasaurus6 ➡ Social Media Twitter: http://twitter.com/think_noodles Instagram: http://instagr.am/thinknoodle... -
The Funk Hunters 2015 SHAMBHALA FULL A/V SET
Free Mp3 Download and Tracklist available at: http://bit.ly/1iBq1U8 Originally performed August 7th in the Fractal Forest at Shambhala Music Festival. Live Sax performed by Smoothie. Artwork by Sam Demoe. This set is dedicated in loving memory of Jon Horvath from Fort Knox Five. Follow: http://facebook.com/thefunkhunters http://instagram.com/thefunkhunters http://twitter.com/thefunkhunters -
Legion Of Skanks - Episode 146 - A Set List, A Monkey, Or A Vagina - Mike Finoia & Ari Shaffir
From The Legion of Skanks Studios deep inside The Creek and The Cave in the heart of Long Island City. This is The Legion Of Skanks PodCast LIVE! This week our guests are Mike Finoia and Ari Shaffir (recorded LIVE 3/31/15) Hosts: Big Jay Oakerson - http://Twitter.com/BigJayOakerson Dave Smith - http://Twitter.com/ComicDaveSmith Luis J Gomez - http://Twitter.com/LuisJGomez Guests: Mike Finoia - http://www.Twitter.com/MikeFinoia Ari Shaffir - http://www.Twitter.com/AriShaffir More info about The Legion of Skanks: Follow us on Twitter - http://Twitter.com/LegionOfSkanks Like us on Facebook - http://Facebook.com/LoSPodCast Join us on Reddit - http://www.reddit.com/r/LegionOfSkanks Subscribe to us on iTunes, give us a positive review, and a 5 star rating. We broadcast LIVE out of The Creek... -
unboxing, using and reviewing a set of Shapton Glass ceramic sharpening stones
In this episode of the Weekend Workshop Ben, master luthier at http://www.crimsonguitars.com demonstrates and reviews a set of Shapton ceramic waterstones, the new glass series. The stones were kindly donated for this video by Jake at our favourite purveyor of Japanese woodworking, gardening and kitchen tools Niwaki. Check them out at http://www.niwaki.com Also use our Crimson Guitars exclusive 10% discount coupon at http://www.niwaki.com on anystones or accessories in the Shapton range. just put the word crimson in the coupon box at checkout. Replacing the Saturday unboxing videos, Ben's Weekend Workshops will be more than just unboxing videos. Ben might reveal, demonstrate and review a new tool to do with guitar building or luthiery. These could be from another manufacturer or on... -
New Research in Robotics by A-SET
A-SET Training & Research Institutes has been doing extensieve research in the field of Robotics and Technology and we had a very nice time discussing these research on P7 News Channel. -
Making a set of Vee Jaws for a Kurt Milling Vise
Got some new stuff! The man in brown has visited a time or two. And we start a work holding project with some sweet shaper action. Here is a link to the Monster Jaws web site. http://monsterjaws.com/ MonsterJaws no longer lists the 6x4x2 but here is a link to the 6x3x2 which would work fine. These guys make a fantastic product. http://www.ebay.com/itm/6-x-3-x-2-Standard-Aluminum-Machinable-Soft-Jaws-for-6-Kurt-Vises-6MJV632A-/300657153356 PDF File of Vee Jaw Drawing https://www.dropbox.com/s/6f4zjgpav3sidoc/6x2x4JawsV2.pdf?dl=0 Solidworks Drawing of the Vee Jaw https://www.dropbox.com/s/ztu9b7zv6ho2yt2/6x2x4JawsV2.SLDDRW?dl=0 Solidworks Model of Vee Jaw https://www.dropbox.com/s/saha56gfawf4qyp/6x2x4JawsV2.SLDPRT?dl=0 -
XLR8R.COM Podcast 336: Frankie Knuckles (A Set From 1990 @ Sound Factory, NY)
Label: XLR8R -- none Series: XLR8R Podcast -- 336 Format: File, MP3, Mixed, 320 kbps Country: Released: 25 Mar 2014 Genre: Electronic Style: House Companies etc Recorded At -- The Sound Factory Bar Credits DJ Mix -- Frankie Knuckles Notes Free download released via XLR8R site. It debuted a week before the artist's passing on March 31, 2014 as a new mix. But it is actually an archival recording from 1990 that took place at The Sound Factory Bar in New York City. TRACKLIST: 01 Michael McDonald "All We Got (Shep Pettibone Remix)" (Reprise) 02 Frankie Knuckles "Workout (Original Demo)" (Virgin) 03 Alison Limerick "Where Love Lives (Red Zone Mix)" (Arista) 04 Basscut "I'm Not in Love" (Charisma) 05 Unknown "Unknown" 06 Sounds of Blackness "The Pressure (Frankie Knuckles Classic Mix)" (... -
Doc Eason performs a set in the Closeup Gallery at the Magic Castle in Hollywood.
Here is a rare glance into the Magic Castle's Closeup Gallery shot in 1998. Doc thoroughly entertains a spirited group in the most intimate show room in the Castle. It was this performance that won him "Closeup Magician of the Year". -
Darts - How To Choose a Set of Darts
Mr. John Lowe, 3 times World Champion in 3 separate decades ( the 70s, the 80s and the 90s ), the first man to do a 9 darter on TV, explains in great detail all you would need to know about darts: how to choose a set of darts, aerodynamics, materials, design theory, things to look for and things to look at and so on. -
A set-up to Crush the Pirc Modern Defense! - GM Roman Dzindzichashvili
♕ DVD: http://www.onlinechesslessons.net/shop/easy-way-to-beat-the-pirc-modern-defense-gm-roman/ ♕ 10 GM SECRETS: http://www.onlinechesslessons.net/10gmsecrets/ ♕ MORE: http://www.onlinechesslessons.net/2015/02/26/beat-the-pirc-modern-defense/ http://facebook.com/chesstutor | http://twitter.com/onlinechessless In the video "Easy Way to Beat The Pirc Modern Defense" by GM Roman Dzindzichashvili, we see a way to set-up our pieces when Black plays the Pirc Modern Defense. With this set-up, we achieve a strong position that has many ways to cause Black problems. Even if Black plays solidly and doesn't make any mistakes, White is able to get a small but clear advantage with the piece set-up that we are shown. The set-up for this opening starts with e4, d4, Nf3, Nc3, h3 and Be3. Playing in thi... -
Dr. Tellis Chapman "It was a set up"
Dr. Tellis Chapman "It was a set up" -
4 Simple Steps To Hook Any Girl's Interest - From "Hi" To "Please Don't Leave"
Nobody has ever properly codified how to hook a set, UNTIL NOW! I've broken it down to four simple steps to get her chasing every time. ENJOY! The four steps are: A- Attention: Get her focused on you. I- Interest: Make it relevant for her. D- Decision: Get her emotionally aroused, and make it "man to woman". A- Action: Get her to commit or acknowledge her interest logically. There is much more detail in the video, and I don't think it's an exaggeration to say that this is one of the most important videos you can watch for game. One warning though... it is VERY dense on theory. Visit http://www.rsdnation.com and learn how to attract women. Watch the video to learn more! Check Out Todd's Other Channels: www.youtube.com/toddfreetour www.youtube.com/rsdinnercircle Take an RSD Boo... -
Design a set for an animated film
This video by Mingjue Helen Chen came with a Photoshop tutorial in issue 113 of ImagineFX. Buy the digital edition of this issue via the ImagineFX app on your platform of choice - see below. Subscribe for more great content: http://goo.gl/ZPW5p Get a digital edition for iPad & iPad: http://www.bit.ly/apple-ifx On Android, and PC: http://bit.ly/r938Ln Or buy the good old fashioned magazine: http://bit.ly/oRR02L Get a FREE 14 day trial of ImagineFX with Barnes & Noble's Nook: http://bit.ly/w6LVsS Visit our website: http://www.creativebloq.com/imaginefx Twitter: http://www.twitter.com/imaginefx Facebook: http://www.facebook.com/imaginefx Pinterest: http://pinterest.com/imaginefx -
iTTV SPM Form 4 Mathematics Chapter 3 Sets (Defining a set) -Tuition/Lesson/Exam/Tips
Chapter 03 : Sets - Lesson 01 : Defining a Set Hey Students. We are a private e-learning company which provide students with video classroom lessons for home study and revision.Subscribe today and save lots of time and money without any additional Tuition classes. Subscribe at www.ittv.com.my/fsl We believe "Learn Well to Do Well !!" Cheers and Thanks for watching and please SHARE & SUBSCRIBE !! -
Repairing a Set of Spline Gears from a Tractor ( Kegelrad Verzahnung Deutz )
Zahnrad Instandsetzung by Deutsche-Werke. Zahnradhersteller fertigen das Kegelrad nicht einzeln an. Das gibt es nur als Paar und kostet über 4000 EURO. Ich habe die geschweißten Zähne grob vorgeschliffen. Es ist vereinbart, dass der Kunde die Feinarbeit beim Einbau selbst macht. -
-
Forging a Set of Tongs
Hey guys this is just a video I took of the steps I went through to make myself a set of bolt head tongs to use when forging other things. They are made of 1/2" rebar as well as 3/8" round stock for the rivet. They have a V shape hammered into the jaws so that I can securely hold both round and square stock for hammering. Total forging and cleanup time was about 5 hours. -
[線性代數] 第 3-2 單元: Span of a Set of Vectors 1/2
Making a Set List // Jeremy Riddle
- Order: Reorder
- Duration: 25:58
- Updated: 19 Nov 2015
- views: 12172
Welcome to the first WorshipU YouTube video series! We'll be giving you a sneak peek into what its like to be a WorshipU student.
This is the first of 4 videos...
Welcome to the first WorshipU YouTube video series! We'll be giving you a sneak peek into what its like to be a WorshipU student.
This is the first of 4 videos we will be releasing on "Worship Department Practicals" - with future lessons by Brian Johnson, Matt Stinton and Kristene DiMarco.
In this first lesson, Jeremy discusses making a set list and figuring out the process of how to do it excellently.
To explore of the student experience, you can start a 7-Day free trial at www.worshipu.com.
wn.com/Making A Set List Jeremy Riddle
Welcome to the first WorshipU YouTube video series! We'll be giving you a sneak peek into what its like to be a WorshipU student.
This is the first of 4 videos we will be releasing on "Worship Department Practicals" - with future lessons by Brian Johnson, Matt Stinton and Kristene DiMarco.
In this first lesson, Jeremy discusses making a set list and figuring out the process of how to do it excellently.
To explore of the student experience, you can start a 7-Day free trial at www.worshipu.com.
- published: 19 Nov 2015
- views: 12172
MathFoundations150: What exactly is a set?
- Order: Reorder
- Duration: 34:40
- Updated: 26 Jul 2015
- views: 5082
What exactly is a set?? This is a crucial question in the modern foundations of mathematics. Here we begin an examination of this thorny issue, first by discuss...
What exactly is a set?? This is a crucial question in the modern foundations of mathematics. Here we begin an examination of this thorny issue, first by discussing the usual English usage of the term, as well as alternate terms, such as collection, aggregate, bunch, class, menagerie etc that are often viewed as synonyms.
While the term `set' as a collection of related objects is reasonably well-understood in everyday life, it turns out that defining what this means precisely involves overcoming a long list of challenges, some of which we lay out clearly in this video.
After watching this lecture, you should henceforth be very skeptical about Cantor's `definition' of this term, and the modern wishy washy acceptance of this term .
We will have a lot more critical things to say about modern set theory, but this is a good introduction to many of the issues.
wn.com/Mathfoundations150 What Exactly Is A Set
What exactly is a set?? This is a crucial question in the modern foundations of mathematics. Here we begin an examination of this thorny issue, first by discussing the usual English usage of the term, as well as alternate terms, such as collection, aggregate, bunch, class, menagerie etc that are often viewed as synonyms.
While the term `set' as a collection of related objects is reasonably well-understood in everyday life, it turns out that defining what this means precisely involves overcoming a long list of challenges, some of which we lay out clearly in this video.
After watching this lecture, you should henceforth be very skeptical about Cantor's `definition' of this term, and the modern wishy washy acceptance of this term .
We will have a lot more critical things to say about modern set theory, but this is a good introduction to many of the issues.
- published: 26 Jul 2015
- views: 5082
DJ Tutorial For The Beginner DJ - Creating a Set, Harmonic Mixing, Beats, Bars & Phrases
- Order: Reorder
- Duration: 21:22
- Updated: 28 Mar 2014
- views: 23704
DJ Sos gives a few tips and techniques for the beginner DJ. These include how to create a set, counting beats, bars and phrases, harmonic mixing, blending and c...
DJ Sos gives a few tips and techniques for the beginner DJ. These include how to create a set, counting beats, bars and phrases, harmonic mixing, blending and cutting.
Here is a link to a site about harmonic mixing
http://www.harmonic-mixing.com/
There are free programs that will put your music files into keys but you will have to search for them!
wn.com/Dj Tutorial For The Beginner Dj Creating A Set, Harmonic Mixing, Beats, Bars Phrases
DJ Sos gives a few tips and techniques for the beginner DJ. These include how to create a set, counting beats, bars and phrases, harmonic mixing, blending and cutting.
Here is a link to a site about harmonic mixing
http://www.harmonic-mixing.com/
There are free programs that will put your music files into keys but you will have to search for them!
- published: 28 Mar 2014
- views: 23704
Minecraft: All A Set Up?!?! - The Heist Custom Map [8]
- Order: Reorder
- Duration: 27:50
- Updated: 20 Oct 2015
- views: 80177
Kevin ordered a Gameband and when I put it on, I get transported into a crazy game where I am a thief and have to hack into systems and try to escape cameras, g...
Kevin ordered a Gameband and when I put it on, I get transported into a crazy game where I am a thief and have to hack into systems and try to escape cameras, guard robots, lasers and more!
➡ Next Episode : https://youtu.be/EV3D5CI-57c
➡ Minecraft The Heist Playlist: http://bit.ly/minecraft-heist
➡ About The Heist
The Heist is one of the most advanced Minecraft maps ever made with over 6000 command blocks! This map is completely vanilla Minecraft, with no mods in 1.8.7!
Download: http://www.curse.com/worlds/minecraft/232294-the-heist
Cubehamster: https://www.youtube.com/user/Cubehamster
Wubbi: https://www.youtube.com/user/WubbiConcepts
Samasaurus6: https://www.youtube.com/user/Samasaurus6
➡ Social Media
Twitter: http://twitter.com/think_noodles
Instagram: http://instagr.am/thinknoodles
Facebook: http://www.facebook.com/Thinknoodles
Website: http://thinknoodles.me
➡ Merchandise
http://thinknoodles.spreadshirt.com (US)
http://thinknoodles.spreadshirt.net (EU)
http://thinknoodles-eu.spreadshirt.co.uk (UK)
➡ Music
Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0
http://creativecommons.org/licenses/by/3.0/
Outro - "Sugar High" by Approaching Nirvana
Illusions: http://bit.ly/VqpmFB
http://www.youtube.com/ApproachingNirvana
wn.com/Minecraft All A Set Up The Heist Custom Map 8
Kevin ordered a Gameband and when I put it on, I get transported into a crazy game where I am a thief and have to hack into systems and try to escape cameras, guard robots, lasers and more!
➡ Next Episode : https://youtu.be/EV3D5CI-57c
➡ Minecraft The Heist Playlist: http://bit.ly/minecraft-heist
➡ About The Heist
The Heist is one of the most advanced Minecraft maps ever made with over 6000 command blocks! This map is completely vanilla Minecraft, with no mods in 1.8.7!
Download: http://www.curse.com/worlds/minecraft/232294-the-heist
Cubehamster: https://www.youtube.com/user/Cubehamster
Wubbi: https://www.youtube.com/user/WubbiConcepts
Samasaurus6: https://www.youtube.com/user/Samasaurus6
➡ Social Media
Twitter: http://twitter.com/think_noodles
Instagram: http://instagr.am/thinknoodles
Facebook: http://www.facebook.com/Thinknoodles
Website: http://thinknoodles.me
➡ Merchandise
http://thinknoodles.spreadshirt.com (US)
http://thinknoodles.spreadshirt.net (EU)
http://thinknoodles-eu.spreadshirt.co.uk (UK)
➡ Music
Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0
http://creativecommons.org/licenses/by/3.0/
Outro - "Sugar High" by Approaching Nirvana
Illusions: http://bit.ly/VqpmFB
http://www.youtube.com/ApproachingNirvana
- published: 20 Oct 2015
- views: 80177
The Funk Hunters 2015 SHAMBHALA FULL A/V SET
- Order: Reorder
- Duration: 79:53
- Updated: 25 Sep 2015
- views: 21383
Free Mp3 Download and Tracklist available at: http://bit.ly/1iBq1U8
Originally performed August 7th in the Fractal Forest at Shambhala Music Festival.
Live Sa...
Free Mp3 Download and Tracklist available at: http://bit.ly/1iBq1U8
Originally performed August 7th in the Fractal Forest at Shambhala Music Festival.
Live Sax performed by Smoothie. Artwork by Sam Demoe.
This set is dedicated in loving memory of Jon Horvath from Fort Knox Five.
Follow:
http://facebook.com/thefunkhunters
http://instagram.com/thefunkhunters
http://twitter.com/thefunkhunters
wn.com/The Funk Hunters 2015 Shambhala Full A V Set
Free Mp3 Download and Tracklist available at: http://bit.ly/1iBq1U8
Originally performed August 7th in the Fractal Forest at Shambhala Music Festival.
Live Sax performed by Smoothie. Artwork by Sam Demoe.
This set is dedicated in loving memory of Jon Horvath from Fort Knox Five.
Follow:
http://facebook.com/thefunkhunters
http://instagram.com/thefunkhunters
http://twitter.com/thefunkhunters
- published: 25 Sep 2015
- views: 21383
Legion Of Skanks - Episode 146 - A Set List, A Monkey, Or A Vagina - Mike Finoia & Ari Shaffir
- Order: Reorder
- Duration: 90:35
- Updated: 07 Apr 2015
- views: 6627
From The Legion of Skanks Studios deep inside The Creek and The Cave in the heart of Long Island City. This is The Legion Of Skanks PodCast LIVE! This week our ...
From The Legion of Skanks Studios deep inside The Creek and The Cave in the heart of Long Island City. This is The Legion Of Skanks PodCast LIVE! This week our guests are Mike Finoia and Ari Shaffir (recorded LIVE 3/31/15)
Hosts:
Big Jay Oakerson - http://Twitter.com/BigJayOakerson
Dave Smith - http://Twitter.com/ComicDaveSmith
Luis J Gomez - http://Twitter.com/LuisJGomez
Guests:
Mike Finoia - http://www.Twitter.com/MikeFinoia
Ari Shaffir - http://www.Twitter.com/AriShaffir
More info about The Legion of Skanks:
Follow us on Twitter - http://Twitter.com/LegionOfSkanks
Like us on Facebook - http://Facebook.com/LoSPodCast
Join us on Reddit - http://www.reddit.com/r/LegionOfSkanks
Subscribe to us on iTunes, give us a positive review, and a 5 star rating.
We broadcast LIVE out of The Creek and The Cave
http://Twitter.com/CreekandCave - http://CreekLIC.com
Be a member of the audience FREE! Every Tuesday night @ 10pm. (No reservation needed)
In The Legion of Skanks Studios at The Creek and The Cave.
10-93 Jackson Ave
Long Island City, NY 11101
wn.com/Legion Of Skanks Episode 146 A Set List, A Monkey, Or A Vagina Mike Finoia Ari Shaffir
From The Legion of Skanks Studios deep inside The Creek and The Cave in the heart of Long Island City. This is The Legion Of Skanks PodCast LIVE! This week our guests are Mike Finoia and Ari Shaffir (recorded LIVE 3/31/15)
Hosts:
Big Jay Oakerson - http://Twitter.com/BigJayOakerson
Dave Smith - http://Twitter.com/ComicDaveSmith
Luis J Gomez - http://Twitter.com/LuisJGomez
Guests:
Mike Finoia - http://www.Twitter.com/MikeFinoia
Ari Shaffir - http://www.Twitter.com/AriShaffir
More info about The Legion of Skanks:
Follow us on Twitter - http://Twitter.com/LegionOfSkanks
Like us on Facebook - http://Facebook.com/LoSPodCast
Join us on Reddit - http://www.reddit.com/r/LegionOfSkanks
Subscribe to us on iTunes, give us a positive review, and a 5 star rating.
We broadcast LIVE out of The Creek and The Cave
http://Twitter.com/CreekandCave - http://CreekLIC.com
Be a member of the audience FREE! Every Tuesday night @ 10pm. (No reservation needed)
In The Legion of Skanks Studios at The Creek and The Cave.
10-93 Jackson Ave
Long Island City, NY 11101
- published: 07 Apr 2015
- views: 6627
unboxing, using and reviewing a set of Shapton Glass ceramic sharpening stones
- Order: Reorder
- Duration: 36:04
- Updated: 31 Oct 2015
- views: 5609
In this episode of the Weekend Workshop Ben, master luthier at http://www.crimsonguitars.com demonstrates and reviews a set of Shapton ceramic waterstones, the ...
In this episode of the Weekend Workshop Ben, master luthier at http://www.crimsonguitars.com demonstrates and reviews a set of Shapton ceramic waterstones, the new glass series. The stones were kindly donated for this video by Jake at our favourite purveyor of Japanese woodworking, gardening and kitchen tools Niwaki. Check them out at http://www.niwaki.com
Also use our Crimson Guitars exclusive 10% discount coupon at http://www.niwaki.com on anystones or accessories in the Shapton range. just put the word crimson in the coupon box at checkout.
Replacing the Saturday unboxing videos, Ben's Weekend Workshops will be more than just unboxing videos. Ben might reveal, demonstrate and review a new tool to do with guitar building or luthiery. These could be from another manufacturer or one of Crimson's own tools. Basically, just another reason for Ben to play around in his workshop.
Please don't forget to subscribe and click 'Like', it means a lot to us. Thank you.
wn.com/Unboxing, Using And Reviewing A Set Of Shapton Glass Ceramic Sharpening Stones
In this episode of the Weekend Workshop Ben, master luthier at http://www.crimsonguitars.com demonstrates and reviews a set of Shapton ceramic waterstones, the new glass series. The stones were kindly donated for this video by Jake at our favourite purveyor of Japanese woodworking, gardening and kitchen tools Niwaki. Check them out at http://www.niwaki.com
Also use our Crimson Guitars exclusive 10% discount coupon at http://www.niwaki.com on anystones or accessories in the Shapton range. just put the word crimson in the coupon box at checkout.
Replacing the Saturday unboxing videos, Ben's Weekend Workshops will be more than just unboxing videos. Ben might reveal, demonstrate and review a new tool to do with guitar building or luthiery. These could be from another manufacturer or one of Crimson's own tools. Basically, just another reason for Ben to play around in his workshop.
Please don't forget to subscribe and click 'Like', it means a lot to us. Thank you.
- published: 31 Oct 2015
- views: 5609
New Research in Robotics by A-SET
- Order: Reorder
- Duration: 23:07
- Updated: 11 Oct 2012
- views: 2389
A-SET Training & Research Institutes has been doing extensieve research in the field of Robotics and Technology and we had a very nice time discussing these res...
A-SET Training & Research Institutes has been doing extensieve research in the field of Robotics and Technology and we had a very nice time discussing these research on P7 News Channel.
wn.com/New Research In Robotics By A Set
A-SET Training & Research Institutes has been doing extensieve research in the field of Robotics and Technology and we had a very nice time discussing these research on P7 News Channel.
- published: 11 Oct 2012
- views: 2389
Making a set of Vee Jaws for a Kurt Milling Vise
- Order: Reorder
- Duration: 24:00
- Updated: 10 Oct 2014
- views: 13161
Got some new stuff! The man in brown has visited a time or two. And we start a work holding project with some sweet shaper action.
Here is a link to the Monst...
Got some new stuff! The man in brown has visited a time or two. And we start a work holding project with some sweet shaper action.
Here is a link to the Monster Jaws web site.
http://monsterjaws.com/
MonsterJaws no longer lists the 6x4x2 but here is a link to the 6x3x2 which would work fine. These guys make a fantastic product.
http://www.ebay.com/itm/6-x-3-x-2-Standard-Aluminum-Machinable-Soft-Jaws-for-6-Kurt-Vises-6MJV632A-/300657153356
PDF File of Vee Jaw Drawing
https://www.dropbox.com/s/6f4zjgpav3sidoc/6x2x4JawsV2.pdf?dl=0
Solidworks Drawing of the Vee Jaw
https://www.dropbox.com/s/ztu9b7zv6ho2yt2/6x2x4JawsV2.SLDDRW?dl=0
Solidworks Model of Vee Jaw
https://www.dropbox.com/s/saha56gfawf4qyp/6x2x4JawsV2.SLDPRT?dl=0
wn.com/Making A Set Of Vee Jaws For A Kurt Milling Vise
Got some new stuff! The man in brown has visited a time or two. And we start a work holding project with some sweet shaper action.
Here is a link to the Monster Jaws web site.
http://monsterjaws.com/
MonsterJaws no longer lists the 6x4x2 but here is a link to the 6x3x2 which would work fine. These guys make a fantastic product.
http://www.ebay.com/itm/6-x-3-x-2-Standard-Aluminum-Machinable-Soft-Jaws-for-6-Kurt-Vises-6MJV632A-/300657153356
PDF File of Vee Jaw Drawing
https://www.dropbox.com/s/6f4zjgpav3sidoc/6x2x4JawsV2.pdf?dl=0
Solidworks Drawing of the Vee Jaw
https://www.dropbox.com/s/ztu9b7zv6ho2yt2/6x2x4JawsV2.SLDDRW?dl=0
Solidworks Model of Vee Jaw
https://www.dropbox.com/s/saha56gfawf4qyp/6x2x4JawsV2.SLDPRT?dl=0
- published: 10 Oct 2014
- views: 13161
XLR8R.COM Podcast 336: Frankie Knuckles (A Set From 1990 @ Sound Factory, NY)
- Order: Reorder
- Duration: 62:45
- Updated: 12 Jul 2014
- views: 1581
Label: XLR8R -- none
Series: XLR8R Podcast -- 336
Format: File, MP3, Mixed, 320 kbps
Country:
Released: 25 Mar 2014
Genre: Electronic
Style: House
Companies...
Label: XLR8R -- none
Series: XLR8R Podcast -- 336
Format: File, MP3, Mixed, 320 kbps
Country:
Released: 25 Mar 2014
Genre: Electronic
Style: House
Companies etc
Recorded At -- The Sound Factory Bar
Credits
DJ Mix -- Frankie Knuckles
Notes
Free download released via XLR8R site. It debuted a week before the artist's passing on March 31, 2014 as a new mix. But it is actually an archival recording from 1990 that took place at The Sound Factory Bar in New York City.
TRACKLIST:
01 Michael McDonald "All We Got (Shep Pettibone Remix)" (Reprise)
02 Frankie Knuckles "Workout (Original Demo)" (Virgin)
03 Alison Limerick "Where Love Lives (Red Zone Mix)" (Arista)
04 Basscut "I'm Not in Love" (Charisma)
05 Unknown "Unknown"
06 Sounds of Blackness "The Pressure (Frankie Knuckles Classic Mix)" (Perspective/AM:PM)
07 Mike Wilson feat. Shawn Christopher "Another Sleepless Night (Red Zone Mix)" (BMG)
08 Fast Eddie "Let's Go" (D.J. International)
09 Trilogy "Love Me Forever or Love Me Not" (ACTO)
10 Frankie Knuckles "The Whistle Song" (Virgin)
wn.com/Xlr8R.Com Podcast 336 Frankie Knuckles (A Set From 1990 Sound Factory, Ny)
Label: XLR8R -- none
Series: XLR8R Podcast -- 336
Format: File, MP3, Mixed, 320 kbps
Country:
Released: 25 Mar 2014
Genre: Electronic
Style: House
Companies etc
Recorded At -- The Sound Factory Bar
Credits
DJ Mix -- Frankie Knuckles
Notes
Free download released via XLR8R site. It debuted a week before the artist's passing on March 31, 2014 as a new mix. But it is actually an archival recording from 1990 that took place at The Sound Factory Bar in New York City.
TRACKLIST:
01 Michael McDonald "All We Got (Shep Pettibone Remix)" (Reprise)
02 Frankie Knuckles "Workout (Original Demo)" (Virgin)
03 Alison Limerick "Where Love Lives (Red Zone Mix)" (Arista)
04 Basscut "I'm Not in Love" (Charisma)
05 Unknown "Unknown"
06 Sounds of Blackness "The Pressure (Frankie Knuckles Classic Mix)" (Perspective/AM:PM)
07 Mike Wilson feat. Shawn Christopher "Another Sleepless Night (Red Zone Mix)" (BMG)
08 Fast Eddie "Let's Go" (D.J. International)
09 Trilogy "Love Me Forever or Love Me Not" (ACTO)
10 Frankie Knuckles "The Whistle Song" (Virgin)
- published: 12 Jul 2014
- views: 1581
Doc Eason performs a set in the Closeup Gallery at the Magic Castle in Hollywood.
- Order: Reorder
- Duration: 24:05
- Updated: 03 Jan 2014
- views: 33607
Here is a rare glance into the Magic Castle's Closeup Gallery shot in 1998. Doc thoroughly entertains a spirited group in the most intimate show room in the Ca...
Here is a rare glance into the Magic Castle's Closeup Gallery shot in 1998. Doc thoroughly entertains a spirited group in the most intimate show room in the Castle. It was this performance that won him "Closeup Magician of the Year".
wn.com/Doc Eason Performs A Set In The Closeup Gallery At The Magic Castle In Hollywood.
Here is a rare glance into the Magic Castle's Closeup Gallery shot in 1998. Doc thoroughly entertains a spirited group in the most intimate show room in the Castle. It was this performance that won him "Closeup Magician of the Year".
- published: 03 Jan 2014
- views: 33607
Darts - How To Choose a Set of Darts
- Order: Reorder
- Duration: 30:36
- Updated: 27 Nov 2013
- views: 28207
Mr. John Lowe, 3 times World Champion in 3 separate decades ( the 70s, the 80s and the 90s ), the first man to do a 9 darter on TV, explains in great detail all...
Mr. John Lowe, 3 times World Champion in 3 separate decades ( the 70s, the 80s and the 90s ), the first man to do a 9 darter on TV, explains in great detail all you would need to know about darts: how to choose a set of darts, aerodynamics, materials, design theory, things to look for and things to look at and so on.
wn.com/Darts How To Choose A Set Of Darts
Mr. John Lowe, 3 times World Champion in 3 separate decades ( the 70s, the 80s and the 90s ), the first man to do a 9 darter on TV, explains in great detail all you would need to know about darts: how to choose a set of darts, aerodynamics, materials, design theory, things to look for and things to look at and so on.
- published: 27 Nov 2013
- views: 28207
A set-up to Crush the Pirc Modern Defense! - GM Roman Dzindzichashvili
- Order: Reorder
- Duration: 37:31
- Updated: 26 Feb 2015
- views: 8148
♕ DVD: http://www.onlinechesslessons.net/shop/easy-way-to-beat-the-pirc-modern-defense-gm-roman/
♕ 10 GM SECRETS: http://www.onlinechesslessons.net/10gmsecrets/...
♕ DVD: http://www.onlinechesslessons.net/shop/easy-way-to-beat-the-pirc-modern-defense-gm-roman/
♕ 10 GM SECRETS: http://www.onlinechesslessons.net/10gmsecrets/
♕ MORE: http://www.onlinechesslessons.net/2015/02/26/beat-the-pirc-modern-defense/
http://facebook.com/chesstutor | http://twitter.com/onlinechessless
In the video "Easy Way to Beat The Pirc Modern Defense" by GM Roman Dzindzichashvili, we see a way to set-up our pieces when Black plays the Pirc Modern Defense. With this set-up, we achieve a strong position that has many ways to cause Black problems. Even if Black plays solidly and doesn't make any mistakes, White is able to get a small but clear advantage with the piece set-up that we are shown.
The set-up for this opening starts with e4, d4, Nf3, Nc3, h3 and Be3. Playing in this way allows for both a positional and tactical style of play. This is a very good situation for openings, because it allows the specific player to customize the opening to whichever playing style he prefers.
In what ways can White play both tactically and positionally? How does he achieve a strong, centralized position in many of the variations? Watch the video to find out!
Interface used ICC: http://www.chessclub.com/from/WStewart/
wn.com/A Set Up To Crush The Pirc Modern Defense Gm Roman Dzindzichashvili
♕ DVD: http://www.onlinechesslessons.net/shop/easy-way-to-beat-the-pirc-modern-defense-gm-roman/
♕ 10 GM SECRETS: http://www.onlinechesslessons.net/10gmsecrets/
♕ MORE: http://www.onlinechesslessons.net/2015/02/26/beat-the-pirc-modern-defense/
http://facebook.com/chesstutor | http://twitter.com/onlinechessless
In the video "Easy Way to Beat The Pirc Modern Defense" by GM Roman Dzindzichashvili, we see a way to set-up our pieces when Black plays the Pirc Modern Defense. With this set-up, we achieve a strong position that has many ways to cause Black problems. Even if Black plays solidly and doesn't make any mistakes, White is able to get a small but clear advantage with the piece set-up that we are shown.
The set-up for this opening starts with e4, d4, Nf3, Nc3, h3 and Be3. Playing in this way allows for both a positional and tactical style of play. This is a very good situation for openings, because it allows the specific player to customize the opening to whichever playing style he prefers.
In what ways can White play both tactically and positionally? How does he achieve a strong, centralized position in many of the variations? Watch the video to find out!
Interface used ICC: http://www.chessclub.com/from/WStewart/
- published: 26 Feb 2015
- views: 8148
Dr. Tellis Chapman "It was a set up"
- Order: Reorder
- Duration: 30:08
- Updated: 09 Feb 2012
- views: 11137
Dr. Tellis Chapman "It was a set up"
Dr. Tellis Chapman "It was a set up"
wn.com/Dr. Tellis Chapman It Was A Set Up
Dr. Tellis Chapman "It was a set up"
- published: 09 Feb 2012
- views: 11137
4 Simple Steps To Hook Any Girl's Interest - From "Hi" To "Please Don't Leave"
- Order: Reorder
- Duration: 21:07
- Updated: 23 Mar 2014
- views: 94362
Nobody has ever properly codified how to hook a set, UNTIL NOW! I've broken it down to four simple steps to get her chasing every time. ENJOY!
The four steps...
Nobody has ever properly codified how to hook a set, UNTIL NOW! I've broken it down to four simple steps to get her chasing every time. ENJOY!
The four steps are:
A- Attention: Get her focused on you.
I- Interest: Make it relevant for her.
D- Decision: Get her emotionally aroused, and make it "man to woman".
A- Action: Get her to commit or acknowledge her interest logically.
There is much more detail in the video, and I don't think it's an exaggeration to say that this is one of the most important videos you can watch for game. One warning though... it is VERY dense on theory.
Visit http://www.rsdnation.com and learn how to attract women.
Watch the video to learn more!
Check Out Todd's Other Channels:
www.youtube.com/toddfreetour
www.youtube.com/rsdinnercircle
Take an RSD Bootcamp with Todd:
http://www.rsdnation.com/todd/events
Check out Immersion:
http://vegasimmersion.com/
Check out Inner Circle:
http://rsdinnercircle.com/
Like me on Facebook:
https://www.facebook.com/rsdtodd
Real Social Dynamics Official Site:
http://www.realsocialdynamics.com
wn.com/4 Simple Steps To Hook Any Girl's Interest From Hi To Please Don't Leave
Nobody has ever properly codified how to hook a set, UNTIL NOW! I've broken it down to four simple steps to get her chasing every time. ENJOY!
The four steps are:
A- Attention: Get her focused on you.
I- Interest: Make it relevant for her.
D- Decision: Get her emotionally aroused, and make it "man to woman".
A- Action: Get her to commit or acknowledge her interest logically.
There is much more detail in the video, and I don't think it's an exaggeration to say that this is one of the most important videos you can watch for game. One warning though... it is VERY dense on theory.
Visit http://www.rsdnation.com and learn how to attract women.
Watch the video to learn more!
Check Out Todd's Other Channels:
www.youtube.com/toddfreetour
www.youtube.com/rsdinnercircle
Take an RSD Bootcamp with Todd:
http://www.rsdnation.com/todd/events
Check out Immersion:
http://vegasimmersion.com/
Check out Inner Circle:
http://rsdinnercircle.com/
Like me on Facebook:
https://www.facebook.com/rsdtodd
Real Social Dynamics Official Site:
http://www.realsocialdynamics.com
- published: 23 Mar 2014
- views: 94362
Design a set for an animated film
- Order: Reorder
- Duration: 68:50
- Updated: 06 Jan 2016
- views: 4701
This video by Mingjue Helen Chen came with a Photoshop tutorial in issue 113 of ImagineFX.
Buy the digital edition of this issue via the ImagineFX app on your...
This video by Mingjue Helen Chen came with a Photoshop tutorial in issue 113 of ImagineFX.
Buy the digital edition of this issue via the ImagineFX app on your platform of choice - see below.
Subscribe for more great content: http://goo.gl/ZPW5p
Get a digital edition for iPad & iPad: http://www.bit.ly/apple-ifx
On Android, and PC: http://bit.ly/r938Ln
Or buy the good old fashioned magazine: http://bit.ly/oRR02L
Get a FREE 14 day trial of ImagineFX with Barnes & Noble's Nook: http://bit.ly/w6LVsS
Visit our website: http://www.creativebloq.com/imaginefx
Twitter: http://www.twitter.com/imaginefx
Facebook: http://www.facebook.com/imaginefx
Pinterest: http://pinterest.com/imaginefx
wn.com/Design A Set For An Animated Film
This video by Mingjue Helen Chen came with a Photoshop tutorial in issue 113 of ImagineFX.
Buy the digital edition of this issue via the ImagineFX app on your platform of choice - see below.
Subscribe for more great content: http://goo.gl/ZPW5p
Get a digital edition for iPad & iPad: http://www.bit.ly/apple-ifx
On Android, and PC: http://bit.ly/r938Ln
Or buy the good old fashioned magazine: http://bit.ly/oRR02L
Get a FREE 14 day trial of ImagineFX with Barnes & Noble's Nook: http://bit.ly/w6LVsS
Visit our website: http://www.creativebloq.com/imaginefx
Twitter: http://www.twitter.com/imaginefx
Facebook: http://www.facebook.com/imaginefx
Pinterest: http://pinterest.com/imaginefx
- published: 06 Jan 2016
- views: 4701
iTTV SPM Form 4 Mathematics Chapter 3 Sets (Defining a set) -Tuition/Lesson/Exam/Tips
- Order: Reorder
- Duration: 22:56
- Updated: 17 May 2012
- views: 16100
Chapter 03 : Sets - Lesson 01 : Defining a Set
Hey Students. We are a private e-learning company which provide students with video classroom lessons for home st...
Chapter 03 : Sets - Lesson 01 : Defining a Set
Hey Students. We are a private e-learning company which provide students with video classroom lessons for home study and revision.Subscribe today and save lots of time and money without any additional Tuition classes. Subscribe at www.ittv.com.my/fsl
We believe "Learn Well to Do Well !!" Cheers and Thanks for watching and please SHARE & SUBSCRIBE !!
wn.com/Ittv Spm Form 4 Mathematics Chapter 3 Sets (Defining A Set) Tuition Lesson Exam Tips
Chapter 03 : Sets - Lesson 01 : Defining a Set
Hey Students. We are a private e-learning company which provide students with video classroom lessons for home study and revision.Subscribe today and save lots of time and money without any additional Tuition classes. Subscribe at www.ittv.com.my/fsl
We believe "Learn Well to Do Well !!" Cheers and Thanks for watching and please SHARE & SUBSCRIBE !!
- published: 17 May 2012
- views: 16100
Repairing a Set of Spline Gears from a Tractor ( Kegelrad Verzahnung Deutz )
- Order: Reorder
- Duration: 92:06
- Updated: 15 May 2014
- views: 123265
Zahnrad Instandsetzung by Deutsche-Werke.
Zahnradhersteller fertigen das Kegelrad nicht einzeln an.
Das gibt es nur als Paar und kostet über 4000 EURO.
Ich habe...
Zahnrad Instandsetzung by Deutsche-Werke.
Zahnradhersteller fertigen das Kegelrad nicht einzeln an.
Das gibt es nur als Paar und kostet über 4000 EURO.
Ich habe die geschweißten Zähne grob vorgeschliffen.
Es ist vereinbart, dass der Kunde die Feinarbeit beim
Einbau selbst macht.
wn.com/Repairing A Set Of Spline Gears From A Tractor ( Kegelrad Verzahnung Deutz )
Zahnrad Instandsetzung by Deutsche-Werke.
Zahnradhersteller fertigen das Kegelrad nicht einzeln an.
Das gibt es nur als Paar und kostet über 4000 EURO.
Ich habe die geschweißten Zähne grob vorgeschliffen.
Es ist vereinbart, dass der Kunde die Feinarbeit beim
Einbau selbst macht.
- published: 15 May 2014
- views: 123265
How to wind a set of guitar pickups aka how to make a pickup
- Order: Reorder
- Duration: 39:42
- Updated: 16 Oct 2014
- views: 53380
in this video I go over how to wind your own set of custom single coil pickups. I also go over all the basic things you will need to start winding pickups at ho...
in this video I go over how to wind your own set of custom single coil pickups. I also go over all the basic things you will need to start winding pickups at home. I am winding a custom set of 1969 single coils for a guitar in this video.
wn.com/How To Wind A Set Of Guitar Pickups Aka How To Make A Pickup
Forging a Set of Tongs
- Order: Reorder
- Duration: 21:46
- Updated: 29 Feb 2012
- views: 32251
Hey guys this is just a video I took of the steps I went through to make myself a set of bolt head tongs to use when forging other things. They are made of 1/2"...
Hey guys this is just a video I took of the steps I went through to make myself a set of bolt head tongs to use when forging other things. They are made of 1/2" rebar as well as 3/8" round stock for the rivet. They have a V shape hammered into the jaws so that I can securely hold both round and square stock for hammering. Total forging and cleanup time was about 5 hours.
wn.com/Forging A Set Of Tongs
Hey guys this is just a video I took of the steps I went through to make myself a set of bolt head tongs to use when forging other things. They are made of 1/2" rebar as well as 3/8" round stock for the rivet. They have a V shape hammered into the jaws so that I can securely hold both round and square stock for hammering. Total forging and cleanup time was about 5 hours.
- published: 29 Feb 2012
- views: 32251
[線性代數] 第 3-2 單元: Span of a Set of Vectors 1/2
- Order: Reorder
- Duration: 26:20
- Updated: 23 Jun 2014
- views: 6012
- published: 23 Jun 2014
- views: 6012
close fullscreen
- Playlist
- Chat
close fullscreen
- Playlist
- Chat
1:17
Soulja Boy: My Publicist’s Arrest Was A Set Up
Soulja Boy tells our photo that him and his team were setup when cops raided his dressing ...
published: 03 Apr 2016
Soulja Boy: My Publicist’s Arrest Was A Set Up
Soulja Boy: My Publicist’s Arrest Was A Set Up
- Report rights infringement
- published: 03 Apr 2016
- views: 1064
50:37
A-SET Robotics, Microprocessor 8085 Lecture 1
A Complete series of Lecture on Microprocessor and its working.
Lecturer : Diwakar Vaish
...
published: 30 Sep 2012
A-SET Robotics, Microprocessor 8085 Lecture 1
A-SET Robotics, Microprocessor 8085 Lecture 1
- Report rights infringement
- published: 30 Sep 2012
- views: 38682
4:38
Set A Fire - Jesus Culture w/ Lyrics
Set A Fire by Jesus Culture with lyrics. This video is good to use for both personal and g...
published: 25 Nov 2012
Set A Fire - Jesus Culture w/ Lyrics
Set A Fire - Jesus Culture w/ Lyrics
- Report rights infringement
- published: 25 Nov 2012
- views: 6194081
10:16
Spare Parts #12 - Heat Bluing A Set Of Steel Clock Hands
Heat Bluing A Set Of Steel Clock Hands, by Clickspring.
In this video I go through the pr...
published: 20 Mar 2016
Spare Parts #12 - Heat Bluing A Set Of Steel Clock Hands
Spare Parts #12 - Heat Bluing A Set Of Steel Clock Hands
- Report rights infringement
- published: 20 Mar 2016
- views: 317
3:59
Adele - Set Fire To The Rain (Live at The Royal Albert Hall)
Music video by Adele performing Set Fire To The Rain. (C) 2011 XL Recordings Ltd
published: 16 Nov 2011
Adele - Set Fire To The Rain (Live at The Royal Albert Hall)
Adele - Set Fire To The Rain (Live at The Royal Albert Hall)
- Report rights infringement
- published: 16 Nov 2011
- views: 216419792
4:00
Adele - Set Fire to the Rain Lyrics
Song: Set Fire to the Rain
Artitst: Adele
All Rights Are to the Original Owners (not me)...
published: 23 Feb 2011
Adele - Set Fire to the Rain Lyrics
Adele - Set Fire to the Rain Lyrics
- Report rights infringement
- published: 23 Feb 2011
- views: 332631193
17:06
The Span of a Set of Vectors
Need a LIVE tutor to help answer a question? Check out the people at http://www.tutor.com/...
published: 26 Aug 2011
The Span of a Set of Vectors
The Span of a Set of Vectors
- Report rights infringement
- published: 26 Aug 2011
- views: 352233
3:03
Spare Parts #10 - Making A Set Of Reusable Emery Sticks
Making A Set Of Reusable Emery Sticks, by Clickspring
This is such a simple idea, but I r...
published: 06 Dec 2015
Spare Parts #10 - Making A Set Of Reusable Emery Sticks
Spare Parts #10 - Making A Set Of Reusable Emery Sticks
- Report rights infringement
- published: 06 Dec 2015
- views: 113313
11:44
Basis for a Set of Vectors
Basis for a Set of Vectors. In this video, I give the definition for a apos; basis apos; o...
published: 09 Sep 2011
Basis for a Set of Vectors
Basis for a Set of Vectors
- Report rights infringement
- published: 09 Sep 2011
- views: 175655
4:22
Adele - Set Fire To The Rain (Karaoke Version)
To ensure that you never miss a brand new hit song, please subscribe to the Sing King Kara...
published: 29 Jul 2015
Adele - Set Fire To The Rain (Karaoke Version)
Adele - Set Fire To The Rain (Karaoke Version)
- Report rights infringement
- published: 29 Jul 2015
- views: 1198701
2:05
Twin Sisters Each Give Birth to a Set of Twins for The Second Time
Defying all the odds, identical twin sisters Kerri Bunker and Kelli Wall from Utah, gave b...
published: 22 Feb 2016
Twin Sisters Each Give Birth to a Set of Twins for The Second Time
Twin Sisters Each Give Birth to a Set of Twins for The Second Time
- Report rights infringement
- published: 22 Feb 2016
- views: 1170
12:06
Home Machine Shop Tool Making - Machining A Set Of Vintage Style Rope Knurls
Machining A Set Of Vintage Style Rope Knurls, by Clickspring
In this video I make a set o...
published: 21 Sep 2015
Home Machine Shop Tool Making - Machining A Set Of Vintage Style Rope Knurls
Home Machine Shop Tool Making - Machining A Set Of Vintage Style Rope Knurls
- Report rights infringement
- published: 21 Sep 2015
- views: 277044
15:53
How To Build a Set of Modern Chairs - Solid Walnut & Zebrawood
The chairs come together in this video and we focus on the tools, measurements, and woodwo...
published: 09 Aug 2014
How To Build a Set of Modern Chairs - Solid Walnut & Zebrawood
How To Build a Set of Modern Chairs - Solid Walnut & Zebrawood
- Report rights infringement
- published: 09 Aug 2014
- views: 392449
7:33
Holy Spirit / Set a Fire (Bryan & Katie Torwalt/Will Reagan & United Pursuit) cover by Sarah Reeves
I love these worship songs together. I pray it blesses you!
DOWNLOAD ON iTUNES: https://...
published: 26 Jan 2014
Holy Spirit / Set a Fire (Bryan & Katie Torwalt/Will Reagan & United Pursuit) cover by Sarah Reeves
Holy Spirit / Set a Fire (Bryan & Katie Torwalt/Will Reagan & United Pursuit) cover by Sarah Reeves
- Report rights infringement
- published: 26 Jan 2014
- views: 1026649
close fullscreen
- Playlist
- Chat
1:56
Chick-fil-A set to open on the eastside
Chick-fil-A set to open on the eastside
published: 07 Apr 2016
Chick-fil-A set to open on the eastside
Chick-fil-A set to open on the eastside
- Report rights infringement
- published: 07 Apr 2016
- views: 5
0:36
Emptying a dispenser after a set amount of items loaded
I wanted a way to empty a dispense once it got to a certain level of full. After not bein...
published: 07 Apr 2016
Emptying a dispenser after a set amount of items loaded
Emptying a dispenser after a set amount of items loaded
- Report rights infringement
- published: 07 Apr 2016
- views: 10
7:44
Waiting on a set in Cloverdale!
I was working on yet another film production in cloverdale which is in Surrey, BC, Canada ...
published: 07 Apr 2016
Waiting on a set in Cloverdale!
Waiting on a set in Cloverdale!
- Report rights infringement
- published: 07 Apr 2016
- views: 4
5:12
How to put a set change on
Sorry about the sniffling😃
published: 06 Apr 2016
How to put a set change on
How to put a set change on
- Report rights infringement
- published: 06 Apr 2016
- views: 10
1:34
Linda Cardellini - I love to work on a set whether it's mostly ...
I love to work on a set whether it's mostly men or mostly women, but there's something abo...
published: 06 Apr 2016
Linda Cardellini - I love to work on a set whether it's mostly ...
Linda Cardellini - I love to work on a set whether it's mostly ...
- Report rights infringement
- published: 06 Apr 2016
- views: 0
2:22
a set diet to lose weight fast
66674
published: 06 Apr 2016
a set diet to lose weight fast
a set diet to lose weight fast
- Report rights infringement
- published: 06 Apr 2016
- views: 0
3:05
Building a Set - Smokey Joe's Cafe
Smokey Joe's Cafe at Town Hall Arts Center
April 1 – May 1, 2016
Words and Music by Jerry ...
published: 06 Apr 2016
Building a Set - Smokey Joe's Cafe
Building a Set - Smokey Joe's Cafe
- Report rights infringement
- published: 06 Apr 2016
- views: 8
0:44
FREE INSTAGRAM GIVEAWAY // WIN A SET BY LENSTAB AND A PRINT
Hi guys! I am here with interesting news. In association with http://www.lenstab.com we ha...
published: 06 Apr 2016
FREE INSTAGRAM GIVEAWAY // WIN A SET BY LENSTAB AND A PRINT
FREE INSTAGRAM GIVEAWAY // WIN A SET BY LENSTAB AND A PRINT
- Report rights infringement
- published: 06 Apr 2016
- views: 44
1:37
Gaming setup 2016(not really a set up)
published: 06 Apr 2016
Gaming setup 2016(not really a set up)
Gaming setup 2016(not really a set up)
- Report rights infringement
- published: 06 Apr 2016
- views: 2
1:10
I AM A SET DESIGNER THAT MEANS I LIVE IN A CRAZY FANTASY WORLD
CLICK HERE TO GET IT : http://tisfinger.com/mfyk8
published: 06 Apr 2016
I AM A SET DESIGNER THAT MEANS I LIVE IN A CRAZY FANTASY WORLD
I AM A SET DESIGNER THAT MEANS I LIVE IN A CRAZY FANTASY WORLD
- Report rights infringement
- published: 06 Apr 2016
- views: 0
9:00
Tutorial: How to describe a set of pictures with the crowd
You have thousands of images from a trap camera, microscope or an archive, and you need to...
published: 06 Apr 2016
Tutorial: How to describe a set of pictures with the crowd
Tutorial: How to describe a set of pictures with the crowd
- Report rights infringement
- published: 06 Apr 2016
- views: 11
11:27
Набор детской косметики Барби A set of children's cosmetics Barbie
Семейка Надом-с Semeika Nadom-s
published: 06 Apr 2016
Набор детской косметики Барби A set of children's cosmetics Barbie
Набор детской косметики Барби A set of children's cosmetics Barbie
- Report rights infringement
- published: 06 Apr 2016
- views: 14
8:58
Build a set of ramps for your mower
A video on building ramps for your mower out of 2 1/2, 2x4's.Use them to change your blade...
published: 05 Apr 2016
Build a set of ramps for your mower
Build a set of ramps for your mower
- Report rights infringement
- published: 05 Apr 2016
- views: 18
0:23
What a set by William
published: 05 Apr 2016
What a set by William
What a set by William
- Report rights infringement
- published: 05 Apr 2016
- views: 1075
close fullscreen
- Playlist
- Chat
25:58
Making a Set List // Jeremy Riddle
Welcome to the first WorshipU YouTube video series! We'll be giving you a sneak peek into ...
published: 19 Nov 2015
Making a Set List // Jeremy Riddle
Making a Set List // Jeremy Riddle
- Report rights infringement
- published: 19 Nov 2015
- views: 12172
34:40
MathFoundations150: What exactly is a set?
What exactly is a set?? This is a crucial question in the modern foundations of mathematic...
published: 26 Jul 2015
MathFoundations150: What exactly is a set?
MathFoundations150: What exactly is a set?
- Report rights infringement
- published: 26 Jul 2015
- views: 5082
21:22
DJ Tutorial For The Beginner DJ - Creating a Set, Harmonic Mixing, Beats, Bars & Phrases
DJ Sos gives a few tips and techniques for the beginner DJ. These include how to create a ...
published: 28 Mar 2014
DJ Tutorial For The Beginner DJ - Creating a Set, Harmonic Mixing, Beats, Bars & Phrases
DJ Tutorial For The Beginner DJ - Creating a Set, Harmonic Mixing, Beats, Bars & Phrases
- Report rights infringement
- published: 28 Mar 2014
- views: 23704
27:50
Minecraft: All A Set Up?!?! - The Heist Custom Map [8]
Kevin ordered a Gameband and when I put it on, I get transported into a crazy game where I...
published: 20 Oct 2015
Minecraft: All A Set Up?!?! - The Heist Custom Map [8]
Minecraft: All A Set Up?!?! - The Heist Custom Map [8]
- Report rights infringement
- published: 20 Oct 2015
- views: 80177
79:53
The Funk Hunters 2015 SHAMBHALA FULL A/V SET
Free Mp3 Download and Tracklist available at: http://bit.ly/1iBq1U8
Originally performed ...
published: 25 Sep 2015
The Funk Hunters 2015 SHAMBHALA FULL A/V SET
The Funk Hunters 2015 SHAMBHALA FULL A/V SET
- Report rights infringement
- published: 25 Sep 2015
- views: 21383
90:35
Legion Of Skanks - Episode 146 - A Set List, A Monkey, Or A Vagina - Mike Finoia & Ari Shaffir
From The Legion of Skanks Studios deep inside The Creek and The Cave in the heart of Long ...
published: 07 Apr 2015
Legion Of Skanks - Episode 146 - A Set List, A Monkey, Or A Vagina - Mike Finoia & Ari Shaffir
Legion Of Skanks - Episode 146 - A Set List, A Monkey, Or A Vagina - Mike Finoia & Ari Shaffir
- Report rights infringement
- published: 07 Apr 2015
- views: 6627
36:04
unboxing, using and reviewing a set of Shapton Glass ceramic sharpening stones
In this episode of the Weekend Workshop Ben, master luthier at http://www.crimsonguitars.c...
published: 31 Oct 2015
unboxing, using and reviewing a set of Shapton Glass ceramic sharpening stones
unboxing, using and reviewing a set of Shapton Glass ceramic sharpening stones
- Report rights infringement
- published: 31 Oct 2015
- views: 5609
23:07
New Research in Robotics by A-SET
A-SET Training & Research Institutes has been doing extensieve research in the field of Ro...
published: 11 Oct 2012
New Research in Robotics by A-SET
New Research in Robotics by A-SET
- Report rights infringement
- published: 11 Oct 2012
- views: 2389
24:00
Making a set of Vee Jaws for a Kurt Milling Vise
Got some new stuff! The man in brown has visited a time or two. And we start a work holdi...
published: 10 Oct 2014
Making a set of Vee Jaws for a Kurt Milling Vise
Making a set of Vee Jaws for a Kurt Milling Vise
- Report rights infringement
- published: 10 Oct 2014
- views: 13161
62:45
XLR8R.COM Podcast 336: Frankie Knuckles (A Set From 1990 @ Sound Factory, NY)
Label: XLR8R -- none
Series: XLR8R Podcast -- 336
Format: File, MP3, Mixed, 320 kbps
Coun...
published: 12 Jul 2014
XLR8R.COM Podcast 336: Frankie Knuckles (A Set From 1990 @ Sound Factory, NY)
XLR8R.COM Podcast 336: Frankie Knuckles (A Set From 1990 @ Sound Factory, NY)
- Report rights infringement
- published: 12 Jul 2014
- views: 1581
24:05
Doc Eason performs a set in the Closeup Gallery at the Magic Castle in Hollywood.
Here is a rare glance into the Magic Castle's Closeup Gallery shot in 1998. Doc thoroughl...
published: 03 Jan 2014
Doc Eason performs a set in the Closeup Gallery at the Magic Castle in Hollywood.
Doc Eason performs a set in the Closeup Gallery at the Magic Castle in Hollywood.
- Report rights infringement
- published: 03 Jan 2014
- views: 33607
30:36
Darts - How To Choose a Set of Darts
Mr. John Lowe, 3 times World Champion in 3 separate decades ( the 70s, the 80s and the 90s...
published: 27 Nov 2013
Darts - How To Choose a Set of Darts
Darts - How To Choose a Set of Darts
- Report rights infringement
- published: 27 Nov 2013
- views: 28207
37:31
A set-up to Crush the Pirc Modern Defense! - GM Roman Dzindzichashvili
♕ DVD: http://www.onlinechesslessons.net/shop/easy-way-to-beat-the-pirc-modern-defense-gm-...
published: 26 Feb 2015
A set-up to Crush the Pirc Modern Defense! - GM Roman Dzindzichashvili
A set-up to Crush the Pirc Modern Defense! - GM Roman Dzindzichashvili
- Report rights infringement
- published: 26 Feb 2015
- views: 8148
30:08
Dr. Tellis Chapman "It was a set up"
Dr. Tellis Chapman "It was a set up"
published: 09 Feb 2012
Dr. Tellis Chapman "It was a set up"
Dr. Tellis Chapman "It was a set up"
- Report rights infringement
- published: 09 Feb 2012
- views: 11137
Making a Set List // Jeremy Riddle...
MathFoundations150: What exactly is a set?...
DJ Tutorial For The Beginner DJ - Creating a Set, ...
![Minecraft: All A Set Up?!?! - The Heist Custom Map [8]](http://web.archive.org./web/20160407080900/http://i.ytimg.com/vi/Zw3n59p6Hxs/0.jpg)
Minecraft: All A Set Up?!?! - The Heist Custom Map...
The Funk Hunters 2015 SHAMBHALA FULL A/V SET...
Legion Of Skanks - Episode 146 - A Set List, A Mon...
unboxing, using and reviewing a set of Shapton Gla...
New Research in Robotics by A-SET...
Making a set of Vee Jaws for a Kurt Milling Vise...
XLR8R.COM Podcast 336: Frankie Knuckles (A Set Fr...
Doc Eason performs a set in the Closeup Gallery at...
Darts - How To Choose a Set of Darts...
A set-up to Crush the Pirc Modern Defense! - GM Ro...
Dr. Tellis Chapman "It was a set up"...
4 Simple Steps To Hook Any Girl's Interest - From ...
Design a set for an animated film...
iTTV SPM Form 4 Mathematics Chapter 3 Sets (Defini...
Repairing a Set of Spline Gears from a Tractor ( K...
How to wind a set of guitar pickups aka how to mak...
Forging a Set of Tongs...
![[線性代數] 第 3-2 單元: Span of a Set of Vectors 1/2](http://web.archive.org./web/20160407080900/http://i.ytimg.com/vi/Ksh3tUqzniw/0.jpg)
[線性代數] 第 3-2 單元: Span of a Set of Vectors 1/2...
-
Lyrics list:text lyricsplay full screenplay karaoke
photo: Via YouTube
Massive 15-Foot, 780-Pound Alligator Caught In Florida
Edit Inquisitr 06 Apr 2016
Hunters from Outwest Farms located in Okeechobee, Florida have posted an image showing a massive, near 15-foot, 780 pound alligator they found and killed. According to CNN, the huge reptile was discovered on Saturday on one of the ponds located on a private ranch owned by Outwest Farms owner Lee Lightsey ... They were surprised when they came across this huge alligator instead ... I hate seeing a beautiful dinosaur like that killed.???? #RIP....
photo: AP / John Raoux
[VIDEO] Florida Woman Gives Governor A Piece Of Her Mind At Starbucks
Edit WorldNews.com 06 Apr 2016
A woman working on her laptop at a Gainesville, Fla. Starbucks apparently had way too much coffee earlier Wednesday when she took on Florida Gov ... ....
photo: UN
Scientists Say They May Have Found Hannibal's Route Through the Alps
Edit WorldNews.com 07 Apr 2016
Ancient horse droppings may be the key to tracing the route of Carthaginian general Hannibal Barca’s legendary march through the Alps, CNN reports.In 218 B.C., Hannibal led an army of more than 30,000 men, 15,000 horses and mules and – famously – about 40 elephants northeast through Europe and crossed the Alps to attack the Roman Republic from the north.It's considered one of the great achievements in military history ... – Chris Allen....
photo: AP / U.S. Customs and Border Protection via AP
FBI: 'Simply Too Early' To Say If San Bernardino iPhone Useful
Edit WorldNews.com 06 Apr 2016
He said the FBI will make that decision only after a final analysis of the phone’s data. "If and when it becomes appropriate to disclose it, we will ... just before the two sides were set for a court date to argue the merits of the case, the Justice Department announced it didn't necessarily need Apple's help after all because an unnamed "outside party" had found a way into the phone.– WN.com, Jack Durschlag....
photo: WN / Ahmed Deeb
Gaza Archaeologists Clamber To Salvage Unearthed Church On Gaza Building Site
Edit WorldNews.com 06 Apr 2016
Disputes over contested territory isn’t the only kind of fighting going on in the Gaza Strip lately as archaeologists and government officials are engaged in an all-out war to save an ancient church unearthed on a Gaza construction site, a RawStory.com via Agence-France-Press report said Wednesday.The site is believe to contain a church or cathedral dating back to at least the 7th century, the report said....
« back to news headlines
20-Piece Luggage Rope Set for $15.99 + free shipping w/code 3-OFF
Edit CNET 07 Apr 2016
OverHalfSale offers this 20-Piece Luggage Rope Set for $18.99. Coupon code "3-OFF" cuts the price to $15.99. With free shipping, that's $9 under the lowest total price we could find for a similar rope set elsewhere. It includes six 10" ropes, four 8" ropes, four 24" ropes, three 36" ropes, and three 48" ropes. Deal ends April 13 ... ....
Home Basics Bamboo Kitchen Tools 6-Piece Set for $8.99 + free shipping w/code 2-OFF
Edit CNET 07 Apr 2016
OverHalfSale offers the Home Basics Bamboo Kitchen Tools 6-Piece Set for $10.99. Coupon code "2-OFF" drops it to $8.99. With free shipping, that's tied with last week's mention of a similar set and the lowest total price we could find by $4. It includes one wooden spoon, one slotted wooden spoon, one rounded fork, one wooden spatula, one slotted spatula, and one single hole mixing spoon. Deal ends April 13 ... ....
LA sets club shutout mark to open season
Edit MLB 07 Apr 2016
SAN DIEGO -- Dodgers pitchers set a franchise record for starting a season with 24 consecutive scoreless innings when Kenta Maeda held the Padres scoreless through the first six innings Wednesday night at Petco Park....
Strasburg sets Nationals' strikeout record
Edit MLB 07 Apr 2016
ATLANTA -- Stephen Strasburg set a Nationals all-time record (since 2005) for most career strikeouts on a whiff of Braves pitcher Bud Norris in the third inning Wednesday night at Turner Field....
Government to set up panel to probe Rs1,000 crore mobile tower scam
Edit DNA India 07 Apr 2016
State urban development minister Ranjeet Patil said in the Legislative Council on Wednesday that all BMC decisions regarding giving over 1,000 prime locations to cellular companies to set up towers will be probed ... State urban development minister Ranjeet Patil said in the Legislative Council on Wednesday that all BMC decisions regarding giving over 1,000 prime locations to cellular companies to set up towers will be probed....
Strasburg sets Nationals' strikeout record (Washington Nationals)
Edit Public Technologies 07 Apr 2016
He entered the day needing three strikeouts to set the mark and started in the first inning by striking out longtime nemesis Freddie Freeman, who entered the night batting 12-for-28 against Strasburg with three home runs....
Doha's $7.5B New Port project set for completion in 2020
Edit Topix 07 Apr 2016
The New Port project is considered to be the largest port development project in the world to be built on unused land. Set for completion by 2020 , the new Doha port will propel the shipping sector forward, double GDP, and consolidate Qatar's emergence as the world's largest producer of liquefied natural gas ... ....
Gold Medal Master Set Highlights Newest Ultimate Team Additions
Edit Forbes 07 Apr 2016
image from EA Sports Want a 99-overall rated Barry Sanders in Madden 16 Ultimate Team (MUT)? If you're a MUT head, you probably do. On Wednesday, EA Sports announced two new additions/initiatives to the Ultimate Team collection. The Gold Medal Master set is now available in MUT and the entire release has [...] ... ....
Hobart man jailed for 10 years for dousing partner in petrol, setting her alight
Edit Australian Broadcasting Corporation 07 Apr 2016Home Essence Delaney 4-Piece Comforter Set for $24.99 + $6 s&h;
Edit CNET 07 Apr 2016
Designer Living offers the Home Essence Delaney 4-Piece Comforter Set in Grey for $24.99 plus $5.95 for shipping. That's the lowest total price we could find by at least $13. It's available in full/queen or king and includes a comforter, two shams, and a decorative pillow. Deal ends April 8 ... ....
Charlotte Smith setting up the Flora and Fauna exhibition at Bundaberg Regional Art Gallery
Edit Australian Broadcasting Corporation 07 Apr 2016
Charlotte Smith setting up the Flora and Fauna exhibition at Bundaberg Regional Art Gallery ... ....
Bryan Colangelo set to be hired as 76ers GM
Edit USA Today 07 Apr 2016
Person with knowledge of the decision. Bryan Colangelo set to be hired as 76ers GM after Sam Hinkie quits . ... ....
- 1
- 2
- 3
- 4
- 5
- Next page »
