- published: 06 Dec 2014
- views: 174106
Drilling is a cutting process that uses a drill bit to cut or enlarge a hole of circular cross-section in solid materials. The drill bit is a rotary cutting tool, often multipoint. The bit is pressed against the workpiece and rotated at rates from hundreds to thousands of revolutions per minute. This forces the cutting edge against the workpiece, cutting off chips from what will become the hole being drilled.
Exceptionally, specially-shaped bits can cut holes of non-circular cross-section; a square cross-section is possible.
Drilled holes are characterized by their sharp edge on the entrance side and the presence of burrs on the exit side (unless they have been removed). Also, the inside of the hole usually has helical feed marks.
Drilling may affect the mechanical properties of the workpiece by creating low residual stresses around the hole opening and a very thin layer of highly stressed and disturbed material on the newly formed surface. This causes the workpiece to become more susceptible to corrosion at the stressed surface.
Offshore deepwater drilling process
1 Actual Casing Drilling Offshore
Deep Sea (Offshore) Drilling Oil Well Exploration
Full Documentary - Offshore Oil Drilling Industry
Running and landing BOP in Offshore Drilling
Drilling 101: How a deep water well is drilled
Extreme Machines - Oil Rig in Nova Scotia Documentary
My Offshore Oil Drilling Rig Tour
Planet 100: Offshore Oil Drilling Explained
Overview on Deep Water Drilling