- published: 08 Dec 2009
- views: 162317
Create your page here
-
remove the playlistBandsaw
- remove the playlistBandsaw
back to playlist
A brief demonstration of how a band saw works and what it can do.
Videos relating to this one:
The physics of bandsaw resawing:
https://www.youtube.com/watch?v=fK9m5PadmiI
Cutting up a log on the bandsaw (2010)
https://www.youtube.com/watch?v=Skuzw7_G53A
Running the sawmill again:
https://www.youtube.com/watch?v=fTQqeVUH8D4
Resawing shelves to guitar sides:
https://www.youtube.com/watch?v=CFcbieXbdjA
- published: 28 Apr 2015
- views: 245249
Here is an honest review and demo of the Skil brand 9" bench top band saw model# 3386. This video talks about the saw, likes and dislikes as well as some real testing, enjoy.
- published: 07 Sep 2015
- views: 27850
Link to the bandsaw plan: http://woodgears.ca/bandsaw/plans/index.html
More info on my bandsaw build: http://woodgears.ca/reader/marius/bandsaw.html
I got serious problems with my bandsaw wheels and I decided to make new ones. I'm really happy with how they turned out.
- sawdust problem fixed
- less wobble in the wheels
- less vibration
- much quieter
- better look
If your building this saw with the plans yourself, I hope this video is helpful.
Motor data: 400v 3-phase, 1,5kw (2hp), 1400rpm
Enjoy the video!
- published: 28 Feb 2015
- views: 305319
You can help to support quality content by pledging a small amount with Patreon:
https://www.patreon.com/user?u=865843&ty;=h
You can follow along with this build on the website forum:
http://www.ibuildit.ca/ibuildit-forum/viewtopic.php?id=583
Some final thoughts on this:
- it's hard work and probably not worth the time and effort of building the saw, unless you plan on doing a lot of it.
- the design for the saw is a good one, in that it was rock solid as it was making the cuts. Making the saw itself move as opposed to moving the wood through it would really make the build a lot more complex. Beefing up the frame to resist movement (chatter) while cutting through 16" of hard maple would be difficult, especially if the height was also adjustable.
- using a stick to lever the wood through the saw was a very good way to regulate a steady feed rate and took little effort.
- adjusting the depth of cut by stacking boards under the wood worked well, much easier and faster to do than I expected.
- cutting through thick, green hardwood gums up the blade and dulls it fairly quickly. Running water onto the blade while it's cutting keeps it clean and free of resin, but also makes quite a mess. I learned that the blade will come off a lot easier if water is used to lube the blade, and of course water and MDF don't ply nice.
- for serious cutting in green, thick hardwood, a 2hp motor doesn't really "cut" it. To make the cutting more efficient (read faster), the blade speed should be very high - as high as 6000 fpm - and a motor that size doesn't have the power. A 6-8 hp gas engine would be much better.
- the blade I used was ok, but not really well suited to this kind of cutting. Better to go with a much wider (1-1/4" - 1-1/2") blade with a lot fewer teeth. Carbide, even, but those blades are expensive and hard to find.
- it's moderately dangerous. First, the wood is massively and deceptively heavy, so there's a crush risk (wear work boots). Moving and handling things this heavy will likely involve muscles that you've not used since you were a kid, so plan on being stiff and sore for a few.
- it's moderately dangerous. The blade can break and get tangled in the drive wheel and after that, it's hard to accurately predict what damage it can do to the machine itself and / or to the personnel operating it.
All in all, for me it was an interesting project and did make me appreciate even more the work involved. I will say honestly that what I'd get out of it in material is not worth the time and effort it takes to do the work, so I'll likely not pursue it again.
- published: 05 May 2016
- views: 519596
http://www.jayscustomcreations.com/?p=5370
I made a few easy bandsaw scoops out of some junk wood that was headed to the landfill. I got the idea from watching Patrick's video from Patrick's Work Shop here on YouTube.
Patrick's video:https://www.youtube.com/watch?v=_HPvcLBSEfY
----------
T-Shirts!
http://www.jayscustomcreations.com/shop
Free SketchUp video tutorials:
http://www.woodworkingwithsketchup.com
Social links:
Twitter = https://twitter.com/JayBates86
Facebook = http://www.facebook.com/jayscustomcreations
SUBSCRIBE = http://www.youtube.com/jayscustomcreations
Instagram= http://www.instagram.com/jaybates86
----------
Music by Jason Shaw
http://audionautix.com
- published: 11 May 2014
- views: 111262
A bandsaw is a power tool which uses a blade consisting of a continuous band of metal with teeth along one edge to cut various workpieces. The band usually rides on two wheels rotating in the same plane, although some bandsaws may have three or four wheels. Bandsawing produces uniform cutting action as a result of an evenly distributed tooth load. Bandsaws are used for woodworking, metalworking, or for cutting a variety of other materials, and are particularly useful for cutting irregular or curved shapes, but can also be used to produce straight cuts. The minimum radius of a curve that can be cut on a particular saw is determined by the width of the band and its kerf.
Saws for cutting meat are typically of all stainless steel construction with easy to clean features. The blades either have fine teeth with heat treated tips, or have plain or scalloped knife edges.
Bandsaws for cutting metal are available in vertical and horizontal designs. Typical band speeds range from 40 feet (12 meters) per minute to 5,000 feet (1,500 meters) per minute, however specialized bandsaws are built for friction cutting of hard metals and run band speeds to 15,000 feet per minute. Metal-cutting bandsaws are usually equipped with brushes or brushwheels to prevent chips from becoming stuck in between the blade's teeth. Systems which cool the blade are also common equipment on metal-cutting bandsaws. The coolant washes away chips and keeps the blade cool and lubricated.
This page contains text from Wikipedia, the Free Encyclopedia -
http://en.wikipedia.org/wiki/Bandsaw
This article is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License, which means that you can copy and modify it as long as the entire work (including additions) remains under this license.
This article is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License, which means that you can copy and modify it as long as the entire work (including additions) remains under this license.
- Loading...
-
10:01Band Saw Basics
Band Saw BasicsBand Saw Basics
A brief demonstration of how a band saw works and what it can do. -
4:03Milling a log on the bandsaw (a bit of bandsaw abuse)
Milling a log on the bandsaw (a bit of bandsaw abuse)Milling a log on the bandsaw (a bit of bandsaw abuse)
Videos relating to this one: The physics of bandsaw resawing: https://www.youtube.com/watch?v=fK9m5PadmiI Cutting up a log on the bandsaw (2010) https://www.youtube.com/watch?v=Skuzw7_G53A Running the sawmill again: https://www.youtube.com/watch?v=fTQqeVUH8D4 Resawing shelves to guitar sides: https://www.youtube.com/watch?v=CFcbieXbdjA -
35:13Band Saw Clinic with Alex Snodgrass
Band Saw Clinic with Alex Snodgrass -
16:29Skil 9" band saw review (worth every penny)
Skil 9" band saw review (worth every penny)Skil 9" band saw review (worth every penny)
Here is an honest review and demo of the Skil brand 9" bench top band saw model# 3386. This video talks about the saw, likes and dislikes as well as some real testing, enjoy. -
22:50✔ DiResta Jimmy Tips 5
✔ DiResta Jimmy Tips 5 -
2:09bandsaw magic
bandsaw magicbandsaw magic
see a deer appear from a block of wood in thirty seconds!!!! -
17:51Making Wheels for the Homemade Bandsaw
Making Wheels for the Homemade BandsawMaking Wheels for the Homemade Bandsaw
Link to the bandsaw plan: http://woodgears.ca/bandsaw/plans/index.html More info on my bandsaw build: http://woodgears.ca/reader/marius/bandsaw.html I got serious problems with my bandsaw wheels and I decided to make new ones. I'm really happy with how they turned out. - sawdust problem fixed - less wobble in the wheels - less vibration - much quieter - better look If your building this saw with the plans yourself, I hope this video is helpful. Motor data: 400v 3-phase, 1,5kw (2hp), 1400rpm Enjoy the video! -
8:48Using The Quick And Dirty Band Saw Mill
Using The Quick And Dirty Band Saw MillUsing The Quick And Dirty Band Saw Mill
You can help to support quality content by pledging a small amount with Patreon: https://www.patreon.com/user?u=865843&ty;=h You can follow along with this build on the website forum: http://www.ibuildit.ca/ibuildit-forum/viewtopic.php?id=583 Some final thoughts on this: - it's hard work and probably not worth the time and effort of building the saw, unless you plan on doing a lot of it. - the design for the saw is a good one, in that it was rock solid as it was making the cuts. Making the saw itself move as opposed to moving the wood through it would really make the build a lot more complex. Beefing up the frame to resist movement (chatter) while cutting through 16" of hard maple would be difficult, especially if the height was also adjustable. - using a stick to lever the wood through the saw was a very good way to regulate a steady feed rate and took little effort. - adjusting the depth of cut by stacking boards under the wood worked well, much easier and faster to do than I expected. - cutting through thick, green hardwood gums up the blade and dulls it fairly quickly. Running water onto the blade while it's cutting keeps it clean and free of resin, but also makes quite a mess. I learned that the blade will come off a lot easier if water is used to lube the blade, and of course water and MDF don't ply nice. - for serious cutting in green, thick hardwood, a 2hp motor doesn't really "cut" it. To make the cutting more efficient (read faster), the blade speed should be very high - as high as 6000 fpm - and a motor that size doesn't have the power. A 6-8 hp gas engine would be much better. - the blade I used was ok, but not really well suited to this kind of cutting. Better to go with a much wider (1-1/4" - 1-1/2") blade with a lot fewer teeth. Carbide, even, but those blades are expensive and hard to find. - it's moderately dangerous. First, the wood is massively and deceptively heavy, so there's a crush risk (wear work boots). Moving and handling things this heavy will likely involve muscles that you've not used since you were a kid, so plan on being stiff and sore for a few. - it's moderately dangerous. The blade can break and get tangled in the drive wheel and after that, it's hard to accurately predict what damage it can do to the machine itself and / or to the personnel operating it. All in all, for me it was an interesting project and did make me appreciate even more the work involved. I will say honestly that what I'd get out of it in material is not worth the time and effort it takes to do the work, so I'll likely not pursue it again. -
14:47Setting up your band saw
Setting up your band sawSetting up your band saw
Setting up a band saw for good performance -
7:21Easy Bandsaw Scoops - 146
Easy Bandsaw Scoops - 146Easy Bandsaw Scoops - 146
http://www.jayscustomcreations.com/?p=5370 I made a few easy bandsaw scoops out of some junk wood that was headed to the landfill. I got the idea from watching Patrick's video from Patrick's Work Shop here on YouTube. Patrick's video:https://www.youtube.com/watch?v=_HPvcLBSEfY ---------- T-Shirts! http://www.jayscustomcreations.com/shop Free SketchUp video tutorials: http://www.woodworkingwithsketchup.com Social links: Twitter = https://twitter.com/JayBates86 Facebook = http://www.facebook.com/jayscustomcreations SUBSCRIBE = http://www.youtube.com/jayscustomcreations Instagram= http://www.instagram.com/jaybates86 ---------- Music by Jason Shaw http://audionautix.com
- Abrasive blasting
- Adze
- Angle grinder
- Angle plate
- Antique tool
- Anvil
- Architect's scale
- Auger
- Automatic lathe
- Axe
- Backscratcher
- Ball-peen hammer
- Band knife
- Bandsaw
- Bandsaw box
- Bar stock
- Beam compass
- Belt sander
- Billhook
- Blade
- Bleeding
- Block plane
- Blow torch
- Bolt cutter
- Bore gauge
- Bow saw
- Brace (tool)
- Bradawl
- Breaker bar
- Broom
- Brush
- Bucket
- Burr (cutter)
- Caliper
- Card scraper
- Casting
- Caulking
- Center gauge
- Ceramic tile cutter
- Chainsaw
- Chalk line
- Chisel
- Chuck (engineering)
- Circular saw
- Clamp (tool)
- Cleaning tool
- Cold saw
- Collet
- Comb
- Combination square
- Compass (drafting)
- Concrete saw
- Coping saw
- Counterbore
- Countersink
- Crowbar (tool)
- Crusher
- Cryogenic treatment
- Cultivator
- Cutting
- Cutting fluid
- Diagonal pliers
- Dial indicator
- Diamond blade
- Diamond tool
- Die (manufacturing)
- Die grinder
- Draw knife
- Drift pin
- Drill
- Drill bit
- Drill press
- Edger
- Emery cloth
- Endmill
- Engineer's blue
- Engineer's scale
- English wheel
- English Wheel
- Fabrication (metal)
- Feather duster
- Feeler gauge
- File (tool)
- Fish tape
- Fixture (tool)
- Flashlight
- Flat spline
- Floor buffer
- Forge
- Fretsaw
- Froe
- Garden fork
- Garden hose
- Garden tool
- Gauge (instrument)
- Gauge block
- Gear shaper
- Glass cutter
- Go no go gauge
- Grater
- Grease gun (tool)
- Grinding machine
- Grinding wheel
- Hacksaw
- Halligan bar
- Hammer
- Hand saw
- Hand scraper
- Hand tool
- Hand truck
- Hardy tool
- Hataki
- Hatchet
- Head saw
- Heat gun
- Heat treat
- Hedge trimmer
- Height gauge
- Hex key
- Hobbing
- Hoe (tool)
- Hook (hand tool)
- Hori hori
- Hot-melt adhesive
- Hydraulic cylinder
- Hydraulic press
- Impact driver
- Impact wrench
- Indexing head
- Irrigation sprinkler
- Jack (device)
- Jackhammer
- Jewellery
- Jig (tool)
- Jig borer
- Jigsaw (power tool)
- Jointer
- Kelly tool
- Kerf
- Knife
- Ladder
- Laser cutting
- Laser level
- Laser line level
- Laser rangefinder
- Lathe
- Lathe (metal)
- Lathe center
- Lawn aerator
- Lawn mower
- Lawn sweeper
- Leaf blower
- Locking pliers
- Loppers
- Loy (spade)
- Lug wrench
- Lumber
- Machete
- Machine press
- Machine shop
- Machine taper
- Machine tool
- Machining
- Machinist square
- Magnetic base
- Mallet
- Mandrel
- Marking blue
- Marking gauge
- Marking out
- Mattock
- Measuring instrument
- Meat
- Metal
- Metallurgy
- Metalworking
- Micrometer
- Milling cutter
- Milling machine
- Miter
- Miter saw
- Mitre box
- Monkey wrench
- Mop
- Mop bucket cart
- Multi-tool
- Nail clipper
- Nail gun
- Needlegun scaler
- Nibbler
- Numerical control
- Nut driver
- Optical comparator
- Paint roller
- Pencil
- Pickaxe
- Piercing saw
- Pipe cleaner
- Pipe wrench
- Pipecutter
- Pitchfork
- Plane (tool)
- Plasma cutting
- Pliers
- Plough
- Plumb-bob
- Plumber wrench
- Plumber's snake
- Plunger
- Pocket knife
- Portable sawmill
- Post hole digger
- Power tool
- Power trowel
- Pressure washer
- Pritchel
- Protractor
- Pruning shears
- Punch (metalworking)
- Punch (tool)
- Punch down tool
- Punch press
- Putty knife
- Radial arm saw
- Radius gauge
- Rake (tool)
- Rasp
- Razor
- Reamer
- Reciprocating saw
- Resaw
- Rip cut
- Rotary table
- Rotary tiller
- Rotary tool
- Router (woodworking)
- Ruler
- Sander
- Sandpaper
- Saw
- Sawfiler
- Sawyer
- Scalpel
- Scissors
- Scratch awl
- Screw press
- Screwdriver
- Scriber
- Scroll saw
- Scythe
- Set square
- Shaper
- Shear (sheet metal)
- Sheet metal
- Shovel
- Sickle
- Sine bar
- Sink wrench
- Slasher (tool)
- Sledgehammer
- Sliding T bevel
- Smith (metalwork)
- Snips
- Socket wrench
- Soldering gun
- Soldering iron
- Spade
- Spike maul
- Spirit level
- Splitting maul
- Sponge (material)
- Squeegee
- Stainless steel
- Stamping press
- Staple gun
- Steam box
- Steam hammer
- Steam mop
- Steel square
- Steel wool
- Stencil
- Stitching awl
- Straightedge
- Strap wrench
- String trimmer
- Surface plate
- Surform
- Swage block
- Switchblade
- Table saw
- Tap and die
- Tape measure
- Tawashi
- Thickness planer
- Thread pitch gauge
- Thread restorer
- Timber mill
- Tipped tool
- Tire iron
- Tongs
- Tool
- Tool belt
- Tool bit
- Tool steel
- Toolbox
- Torque wrench
- Trip hammer
- Trowel
- Turret lathe
- Upholstery hammer
- Utility knife
- Vacuum cleaner
- Vernier scale
- Vise
- Vise (tool)
- Water jet cutter
- Weighing scale
- Welding
- Wheelbarrow
- Wiggler (tool)
- Wire brush
- Wire stripper
- Wood shaper
- Wood veneer
- Woodworking
- Workbench
- Wrench
Bandsaw
ALBUMS
- Fresh Takes on Old Slabs released: 1999
Fresh Takes on Old Slabs
Released 1999- add to main playlist Play in Full Screen Death Is Coming to Get You
- add to main playlist Play in Full Screen Mutherfuker
- add to main playlist Play in Full Screen Satan Gave Me a Taco
- add to main playlist Play in Full Screen Crystal Clear (Beer)
- add to main playlist Play in Full Screen Sleeping Bag
- add to main playlist Play in Full Screen Truckdriving Neighbors Downstairs (Yellow Sweat)
- add to main playlist Play in Full Screen U-Boat (Rowboat)
- add to main playlist Play in Full Screen One of These Days / Flavor
- add to main playlist Play in Full Screen Static [Baby]
- add to main playlist Play in Full Screen Bogusflow
- add to main playlist Play in Full Screen Special People [M.M.M. mix]
- add to main playlist Play in Full Screen Pay No Mind [Snoozer]
- add to main playlist Play in Full Screen Let's Go Moon Some Cars
- add to main playlist Play in Full Screen Blunderpeel (Thunderpeel)
- add to main playlist Play in Full Screen Trouble All My Days
- add to main playlist Play in Full Screen Puttin' It Down
- add to main playlist Play in Full Screen Sing It Again
- add to main playlist Play in Full Screen Steve Threw Up
- add to main playlist Play in Full Screen Will I Be Ignored by the Lord?
- add to main playlist Play in Full Screen Strange Invitation
- add to main playlist Play in Full Screen Whiskeyclone, Hotel City 1997
- add to main playlist Play in Full Screen One Foot in the Grave (Minimix)
-
Band Saw Basics
A brief demonstration of how a band saw works and what it can do. -
Milling a log on the bandsaw (a bit of bandsaw abuse)
Videos relating to this one: The physics of bandsaw resawing: https://www.youtube.com/watch?v=fK9m5PadmiI Cutting up a log on the bandsaw (2010) https://www.youtube.com/watch?v=Skuzw7_G53A Running the sawmill again: https://www.youtube.com/watch?v=fTQqeVUH8D4 Resawing shelves to guitar sides: https://www.youtube.com/watch?v=CFcbieXbdjA -
-
Skil 9" band saw review (worth every penny)
Here is an honest review and demo of the Skil brand 9" bench top band saw model# 3386. This video talks about the saw, likes and dislikes as well as some real testing, enjoy. -
-
bandsaw magic
see a deer appear from a block of wood in thirty seconds!!!! -
Making Wheels for the Homemade Bandsaw
Link to the bandsaw plan: http://woodgears.ca/bandsaw/plans/index.html More info on my bandsaw build: http://woodgears.ca/reader/marius/bandsaw.html I got serious problems with my bandsaw wheels and I decided to make new ones. I'm really happy with how they turned out. - sawdust problem fixed - less wobble in the wheels - less vibration - much quieter - better look If your building this saw with the plans yourself, I hope this video is helpful. Motor data: 400v 3-phase, 1,5kw (2hp), 1400rpm Enjoy the video! -
Using The Quick And Dirty Band Saw Mill
You can help to support quality content by pledging a small amount with Patreon: https://www.patreon.com/user?u=865843&ty;=h You can follow along with this build on the website forum: http://www.ibuildit.ca/ibuildit-forum/viewtopic.php?id=583 Some final thoughts on this: - it's hard work and probably not worth the time and effort of building the saw, unless you plan on doing a lot of it. - the design for the saw is a good one, in that it was rock solid as it was making the cuts. Making the saw itself move as opposed to moving the wood through it would really make the build a lot more complex. Beefing up the frame to resist movement (chatter) while cutting through 16" of hard maple would be difficult, especially if the height was also adjustable. - using a stick to lever the wood through... -
Setting up your band saw
Setting up a band saw for good performance -
Easy Bandsaw Scoops - 146
http://www.jayscustomcreations.com/?p=5370 I made a few easy bandsaw scoops out of some junk wood that was headed to the landfill. I got the idea from watching Patrick's video from Patrick's Work Shop here on YouTube. Patrick's video:https://www.youtube.com/watch?v=_HPvcLBSEfY ---------- T-Shirts! http://www.jayscustomcreations.com/shop Free SketchUp video tutorials: http://www.woodworkingwithsketchup.com Social links: Twitter = https://twitter.com/JayBates86 Facebook = http://www.facebook.com/jayscustomcreations SUBSCRIBE = http://www.youtube.com/jayscustomcreations Instagram= http://www.instagram.com/jaybates86 ---------- Music by Jason Shaw http://audionautix.com
Band Saw Basics
- Order: Reorder
- Duration: 10:01
- Updated: 08 Dec 2009
- views: 162317
A brief demonstration of how a band saw works and what it can do.
A brief demonstration of how a band saw works and what it can do.
wn.com/Band Saw Basics
A brief demonstration of how a band saw works and what it can do.
- published: 08 Dec 2009
- views: 162317
Milling a log on the bandsaw (a bit of bandsaw abuse)
- Order: Reorder
- Duration: 4:03
- Updated: 28 Apr 2015
- views: 245249
Videos relating to this one:
The physics of bandsaw resawing:
https://www.youtube.com/watch?v=fK9m5PadmiI
Cutting up a log on the bandsaw (2010)
https://www.y...
Videos relating to this one:
The physics of bandsaw resawing:
https://www.youtube.com/watch?v=fK9m5PadmiI
Cutting up a log on the bandsaw (2010)
https://www.youtube.com/watch?v=Skuzw7_G53A
Running the sawmill again:
https://www.youtube.com/watch?v=fTQqeVUH8D4
Resawing shelves to guitar sides:
https://www.youtube.com/watch?v=CFcbieXbdjA
wn.com/Milling A Log On The Bandsaw (A Bit Of Bandsaw Abuse)
Videos relating to this one:
The physics of bandsaw resawing:
https://www.youtube.com/watch?v=fK9m5PadmiI
Cutting up a log on the bandsaw (2010)
https://www.youtube.com/watch?v=Skuzw7_G53A
Running the sawmill again:
https://www.youtube.com/watch?v=fTQqeVUH8D4
Resawing shelves to guitar sides:
https://www.youtube.com/watch?v=CFcbieXbdjA
- published: 28 Apr 2015
- views: 245249
Band Saw Clinic with Alex Snodgrass
- Order: Reorder
- Duration: 35:13
- Updated: 29 Dec 2011
- views: 304587
Skil 9" band saw review (worth every penny)
- Order: Reorder
- Duration: 16:29
- Updated: 07 Sep 2015
- views: 27850
Here is an honest review and demo of the Skil brand 9" bench top band saw model# 3386. This video talks about the saw, likes and dislikes as well as some real t...
Here is an honest review and demo of the Skil brand 9" bench top band saw model# 3386. This video talks about the saw, likes and dislikes as well as some real testing, enjoy.
wn.com/Skil 9 Band Saw Review (Worth Every Penny)
Here is an honest review and demo of the Skil brand 9" bench top band saw model# 3386. This video talks about the saw, likes and dislikes as well as some real testing, enjoy.
- published: 07 Sep 2015
- views: 27850
✔ DiResta Jimmy Tips 5
- Order: Reorder
- Duration: 22:50
- Updated: 26 Mar 2015
- views: 237270
Bandsaw Tips please share your tips in the comments!
Thank you!
David Waelder is the bandsaw puppeteer!!
Bandsaw Tips please share your tips in the comments!
Thank you!
David Waelder is the bandsaw puppeteer!!
wn.com/✔ Diresta Jimmy Tips 5
bandsaw magic
- Order: Reorder
- Duration: 2:09
- Updated: 20 Feb 2008
- views: 2545814
see a deer appear from a block of wood in thirty seconds!!!!
see a deer appear from a block of wood in thirty seconds!!!!
wn.com/Bandsaw Magic
see a deer appear from a block of wood in thirty seconds!!!!
- published: 20 Feb 2008
- views: 2545814
Making Wheels for the Homemade Bandsaw
- Order: Reorder
- Duration: 17:51
- Updated: 28 Feb 2015
- views: 305319
Link to the bandsaw plan: http://woodgears.ca/bandsaw/plans/index.html
More info on my bandsaw build: http://woodgears.ca/reader/marius/bandsaw.html
I got serio...
Link to the bandsaw plan: http://woodgears.ca/bandsaw/plans/index.html
More info on my bandsaw build: http://woodgears.ca/reader/marius/bandsaw.html
I got serious problems with my bandsaw wheels and I decided to make new ones. I'm really happy with how they turned out.
- sawdust problem fixed
- less wobble in the wheels
- less vibration
- much quieter
- better look
If your building this saw with the plans yourself, I hope this video is helpful.
Motor data: 400v 3-phase, 1,5kw (2hp), 1400rpm
Enjoy the video!
wn.com/Making Wheels For The Homemade Bandsaw
Link to the bandsaw plan: http://woodgears.ca/bandsaw/plans/index.html
More info on my bandsaw build: http://woodgears.ca/reader/marius/bandsaw.html
I got serious problems with my bandsaw wheels and I decided to make new ones. I'm really happy with how they turned out.
- sawdust problem fixed
- less wobble in the wheels
- less vibration
- much quieter
- better look
If your building this saw with the plans yourself, I hope this video is helpful.
Motor data: 400v 3-phase, 1,5kw (2hp), 1400rpm
Enjoy the video!
- published: 28 Feb 2015
- views: 305319
Using The Quick And Dirty Band Saw Mill
- Order: Reorder
- Duration: 8:48
- Updated: 05 May 2016
- views: 519596
You can help to support quality content by pledging a small amount with Patreon:
https://www.patreon.com/user?u=865843&ty;=h
You can follow along with this buil...
You can help to support quality content by pledging a small amount with Patreon:
https://www.patreon.com/user?u=865843&ty;=h
You can follow along with this build on the website forum:
http://www.ibuildit.ca/ibuildit-forum/viewtopic.php?id=583
Some final thoughts on this:
- it's hard work and probably not worth the time and effort of building the saw, unless you plan on doing a lot of it.
- the design for the saw is a good one, in that it was rock solid as it was making the cuts. Making the saw itself move as opposed to moving the wood through it would really make the build a lot more complex. Beefing up the frame to resist movement (chatter) while cutting through 16" of hard maple would be difficult, especially if the height was also adjustable.
- using a stick to lever the wood through the saw was a very good way to regulate a steady feed rate and took little effort.
- adjusting the depth of cut by stacking boards under the wood worked well, much easier and faster to do than I expected.
- cutting through thick, green hardwood gums up the blade and dulls it fairly quickly. Running water onto the blade while it's cutting keeps it clean and free of resin, but also makes quite a mess. I learned that the blade will come off a lot easier if water is used to lube the blade, and of course water and MDF don't ply nice.
- for serious cutting in green, thick hardwood, a 2hp motor doesn't really "cut" it. To make the cutting more efficient (read faster), the blade speed should be very high - as high as 6000 fpm - and a motor that size doesn't have the power. A 6-8 hp gas engine would be much better.
- the blade I used was ok, but not really well suited to this kind of cutting. Better to go with a much wider (1-1/4" - 1-1/2") blade with a lot fewer teeth. Carbide, even, but those blades are expensive and hard to find.
- it's moderately dangerous. First, the wood is massively and deceptively heavy, so there's a crush risk (wear work boots). Moving and handling things this heavy will likely involve muscles that you've not used since you were a kid, so plan on being stiff and sore for a few.
- it's moderately dangerous. The blade can break and get tangled in the drive wheel and after that, it's hard to accurately predict what damage it can do to the machine itself and / or to the personnel operating it.
All in all, for me it was an interesting project and did make me appreciate even more the work involved. I will say honestly that what I'd get out of it in material is not worth the time and effort it takes to do the work, so I'll likely not pursue it again.
wn.com/Using The Quick And Dirty Band Saw Mill
You can help to support quality content by pledging a small amount with Patreon:
https://www.patreon.com/user?u=865843&ty;=h
You can follow along with this build on the website forum:
http://www.ibuildit.ca/ibuildit-forum/viewtopic.php?id=583
Some final thoughts on this:
- it's hard work and probably not worth the time and effort of building the saw, unless you plan on doing a lot of it.
- the design for the saw is a good one, in that it was rock solid as it was making the cuts. Making the saw itself move as opposed to moving the wood through it would really make the build a lot more complex. Beefing up the frame to resist movement (chatter) while cutting through 16" of hard maple would be difficult, especially if the height was also adjustable.
- using a stick to lever the wood through the saw was a very good way to regulate a steady feed rate and took little effort.
- adjusting the depth of cut by stacking boards under the wood worked well, much easier and faster to do than I expected.
- cutting through thick, green hardwood gums up the blade and dulls it fairly quickly. Running water onto the blade while it's cutting keeps it clean and free of resin, but also makes quite a mess. I learned that the blade will come off a lot easier if water is used to lube the blade, and of course water and MDF don't ply nice.
- for serious cutting in green, thick hardwood, a 2hp motor doesn't really "cut" it. To make the cutting more efficient (read faster), the blade speed should be very high - as high as 6000 fpm - and a motor that size doesn't have the power. A 6-8 hp gas engine would be much better.
- the blade I used was ok, but not really well suited to this kind of cutting. Better to go with a much wider (1-1/4" - 1-1/2") blade with a lot fewer teeth. Carbide, even, but those blades are expensive and hard to find.
- it's moderately dangerous. First, the wood is massively and deceptively heavy, so there's a crush risk (wear work boots). Moving and handling things this heavy will likely involve muscles that you've not used since you were a kid, so plan on being stiff and sore for a few.
- it's moderately dangerous. The blade can break and get tangled in the drive wheel and after that, it's hard to accurately predict what damage it can do to the machine itself and / or to the personnel operating it.
All in all, for me it was an interesting project and did make me appreciate even more the work involved. I will say honestly that what I'd get out of it in material is not worth the time and effort it takes to do the work, so I'll likely not pursue it again.
- published: 05 May 2016
- views: 519596
Setting up your band saw
- Order: Reorder
- Duration: 14:47
- Updated: 03 Nov 2013
- views: 175121
Setting up a band saw for good performance
Setting up a band saw for good performance
wn.com/Setting Up Your Band Saw
Easy Bandsaw Scoops - 146
- Order: Reorder
- Duration: 7:21
- Updated: 11 May 2014
- views: 111262
http://www.jayscustomcreations.com/?p=5370
I made a few easy bandsaw scoops out of some junk wood that was headed to the landfill. I got the idea from watching ...
http://www.jayscustomcreations.com/?p=5370
I made a few easy bandsaw scoops out of some junk wood that was headed to the landfill. I got the idea from watching Patrick's video from Patrick's Work Shop here on YouTube.
Patrick's video:https://www.youtube.com/watch?v=_HPvcLBSEfY
----------
T-Shirts!
http://www.jayscustomcreations.com/shop
Free SketchUp video tutorials:
http://www.woodworkingwithsketchup.com
Social links:
Twitter = https://twitter.com/JayBates86
Facebook = http://www.facebook.com/jayscustomcreations
SUBSCRIBE = http://www.youtube.com/jayscustomcreations
Instagram= http://www.instagram.com/jaybates86
----------
Music by Jason Shaw
http://audionautix.com
wn.com/Easy Bandsaw Scoops 146
http://www.jayscustomcreations.com/?p=5370
I made a few easy bandsaw scoops out of some junk wood that was headed to the landfill. I got the idea from watching Patrick's video from Patrick's Work Shop here on YouTube.
Patrick's video:https://www.youtube.com/watch?v=_HPvcLBSEfY
----------
T-Shirts!
http://www.jayscustomcreations.com/shop
Free SketchUp video tutorials:
http://www.woodworkingwithsketchup.com
Social links:
Twitter = https://twitter.com/JayBates86
Facebook = http://www.facebook.com/jayscustomcreations
SUBSCRIBE = http://www.youtube.com/jayscustomcreations
Instagram= http://www.instagram.com/jaybates86
----------
Music by Jason Shaw
http://audionautix.com
- published: 11 May 2014
- views: 111262
close fullscreen
- Playlist
- Chat
close fullscreen
- Playlist
- Chat
10:01
Band Saw Basics
A brief demonstration of how a band saw works and what it can do.
published: 08 Dec 2009
Band Saw Basics
Band Saw Basics
- Report rights infringement
- published: 08 Dec 2009
- views: 162317
4:03
Milling a log on the bandsaw (a bit of bandsaw abuse)
Videos relating to this one:
The physics of bandsaw resawing:
https://www.youtube.com/wat...
published: 28 Apr 2015
Milling a log on the bandsaw (a bit of bandsaw abuse)
Milling a log on the bandsaw (a bit of bandsaw abuse)
- Report rights infringement
- published: 28 Apr 2015
- views: 245249
35:13
Band Saw Clinic with Alex Snodgrass
Alex Snodgrass from Carter Tools demonstrates how to adjust your Band Saw for optimal perf...
published: 29 Dec 2011
Band Saw Clinic with Alex Snodgrass
Band Saw Clinic with Alex Snodgrass
- Report rights infringement
- published: 29 Dec 2011
- views: 304587
16:29
Skil 9" band saw review (worth every penny)
Here is an honest review and demo of the Skil brand 9" bench top band saw model# 3386. Thi...
published: 07 Sep 2015
Skil 9" band saw review (worth every penny)
Skil 9" band saw review (worth every penny)
- Report rights infringement
- published: 07 Sep 2015
- views: 27850
22:50
✔ DiResta Jimmy Tips 5
Bandsaw Tips please share your tips in the comments!
Thank you!
David Waelder is the ban...
published: 26 Mar 2015
✔ DiResta Jimmy Tips 5
✔ DiResta Jimmy Tips 5
- Report rights infringement
- published: 26 Mar 2015
- views: 237270
2:09
bandsaw magic
see a deer appear from a block of wood in thirty seconds!!!!
published: 20 Feb 2008
bandsaw magic
bandsaw magic
- Report rights infringement
- published: 20 Feb 2008
- views: 2545814
17:51
Making Wheels for the Homemade Bandsaw
Link to the bandsaw plan: http://woodgears.ca/bandsaw/plans/index.html
More info on my ban...
published: 28 Feb 2015
Making Wheels for the Homemade Bandsaw
Making Wheels for the Homemade Bandsaw
- Report rights infringement
- published: 28 Feb 2015
- views: 305319
8:48
Using The Quick And Dirty Band Saw Mill
You can help to support quality content by pledging a small amount with Patreon:
https://w...
published: 05 May 2016
Using The Quick And Dirty Band Saw Mill
Using The Quick And Dirty Band Saw Mill
- Report rights infringement
- published: 05 May 2016
- views: 519596
14:47
Setting up your band saw
Setting up a band saw for good performance
published: 03 Nov 2013
Setting up your band saw
Setting up your band saw
- Report rights infringement
- published: 03 Nov 2013
- views: 175121
7:21
Easy Bandsaw Scoops - 146
http://www.jayscustomcreations.com/?p=5370
I made a few easy bandsaw scoops out of some ju...
published: 11 May 2014
Easy Bandsaw Scoops - 146
Easy Bandsaw Scoops - 146
- Report rights infringement
- published: 11 May 2014
- views: 111262
Band Saw Basics...
Milling a log on the bandsaw (a bit of bandsaw abu...
Band Saw Clinic with Alex Snodgrass...
Skil 9" band saw review (worth every penny)...
✔ DiResta Jimmy Tips 5...
bandsaw magic...
Making Wheels for the Homemade Bandsaw...
Using The Quick And Dirty Band Saw Mill...
Setting up your band saw...
Easy Bandsaw Scoops - 146...
-
Lyrics list:lyrics
-
Dansa Pausa
Dansa Pausa
När Panetoz kommer in
Och du skapar kaos
När Panetoz kommer in
Och du skapar kaos
När Panetoz kommer in
Och du skapar kaos
När Panetoz kommer in
Och du skapar kaos
Utmanar er alla till en afro-paus
Så, baby
Dansa
Pausa
Dansa
Pausa
Skiter i om du är tjock, smal, fin eller ful
Enda regeln är att du ska ha så jävla kul
Och du ska
Dansa
Pausa
Dansa
Pausa
När Panetoz kommer in
Och du skapar kaos
Utmanar er alla till en afro-paus
Så, baby
Dansa
Pausa
Dansa
Pausa
Skiter i om du är tjock, smal, fin eller ful
Enda regeln är att du ska ha så jävla kul
Och du ska
Dansa
Pausa
Dansa
Pausa
Då är det dags igen
Då är det dags igen?
Är det dags, är det dags, är det dags igen
Då vi kommer in och lägger det på max igen
Clean max eller sax, Panetoz-stilen
Jag står på scenen, vill ha dig, inte dealen
Vi pumpar musiken och ni gillar er känslor,
Fete med mic:en, plats i mouse sprouse
Bjuder du på dans, eller tantan
Dansa, pausa, gör det du while
Gör vad du vill, ingen stoppar vår shout för,
Det de hatar, vi älskar dem
Det de kräver är känslan i dem som vi ger dem
De äkta, vi backar dem
Vi ger dem kärlek så de kan dansa
De keffa, vi saxar dem, ja vi saxar dem, ja, vi saxar dem
När Panetoz kommer in
Och du skapar kaos
Utmanar er alla till en afro-paus
Så, baby
Dansa
Pausa
Dansa
Pausa
Skiter i om du är tjock, smal, fin eller ful
Enda regeln är att du ska ha så jävla kul
Och du ska
Dansa
Pausa
Dansa
Pausa
När Panetoz kommer in
Och du skapar kaos
Utmanar er alla till en afro-paus
Så, baby
Dansa
Pausa
Dansa
Pausa
Skiter i om du är tjock, smal, fin eller ful
Enda regeln är att du ska ha så jävla kul
Och du ska
Dansa
Pausa
Dansa
Pausa
Livet blir, livet blir vad du gör det till
Du kan leva helvilt eller ta' det chill
Hur du än lever ditt, stå aldrig still
Och till din hindra, hindra, du måste hinna
Vinna det bästa, leva och försvinna
Livet är för kort, för att låta tiden rinna
Hämta vinen, dinen, säg pausa (pausa, pausa, pausa, pausa)
Dansa i klubben, jag satt på gatan
Dansa i staden eller inne på ladan
Dansa på botten för att nå toppen
Dansa för själen, sinnen, och kroppen
Dansa på scenen, dansa i publiken
Dansa för rappen, dansa till din änka
Dansarens drotting blir ej besviken
Dansa för världen, dansa till musiken,
Dansa din dans så fort du får en chans
När Panetoz kommer in
Och du skapar kaos
Utmanar er alla till en afro-paus
Så, baby
Dansa
Pausa
Dansa
Pausa
Skiter i om du är tjock, smal, fin eller ful
Enda regeln är att du ska ha så jävla kul
Och du ska
Dansa
Pausa
Dansa
Pausa
När Panetoz kommer in
Och du skapar kaos
Utmanar er alla till en afro-paus
Så, baby
Dansa
Pausa
Dansa
Pausa
Skiter i om du är tjock, smal, fin eller ful
Enda regeln är att du ska ha så jävla kul
Och du ska
Dansa
Pausa
Dansa
photo: Via YouTube
Singapore Airlines flight SQ368 catches fire during emergency landing; passengers safe
Edit DNA India 27 Jun 2016
-->. A Singapore Airlines (SIA) flight en route to Milan today caught fire while making an emergency landing at Changi Airport here ... When they landed he said engine was on fire, he could see flames ... ....
photo: NASA / JPL-Caltech/MSSS
NASA Curiosity rover discovers unexpected mineral on Mars
Edit Deccan Chronicle 26 Jun 2016
NASA's Curiosity rover has discovered an unexpected mineral in a rock sample on Mars, a finding that suggests the red planet hosted explosive volcanoes during its evolution. The Mars Science Laboratory rover, Curiosity, has been exploring sedimentary rocks within Gale Crater since landing in August 2012 ... ‘On Earth, tridymite is formed at high temperatures in an explosive process called silicic volcanism ... ....
photo: RB PHOTO
Brexit: France and Germany 'in agreement' over UK's EU exit
Edit BBC News 27 Jun 2016
Share. Share this with. Copy this link http.//www.bbc.co.uk/news/world-europe-36637232. German Chancellor Angela Merkel and French President Francois Hollande have said they are in "full agreement" on how to handle the fallout from the UK's decision to leave the European Union. Mr Hollande warned that "separated, we run the risk of divisions, dissension and quarrels" ... In other developments. ... Share this story About sharing. ....
photo:
‘Game of Thrones’ Leaves Fans With Much To Talk About
Edit The Wrap 27 Jun 2016
(WARNING. Major spoilers for the “Game of Thrones” season finale ahead). Last season, “Game of Thrones” left its fans with one big thing to talk about. is Jon Snow dead or not? This season, they left them with way too many things to talk about ... Let’s get into them shall we?. First, there’s the most tragic of the many, many deaths that came in this episode. Margaery Tyrell is no longer with us ... Omg....
photo: US DoS
Europe to push for quickie British divorce as Kerry flies in
Edit The Times of India 27 Jun 2016
BRUSSELS. European leaders embark this week on a frantic drive to push Britain into a quick divorce, with top US diplomat John Kerry rushing to join discussions as the "Brexit" crisis goes global. Germany's powerful Chancellor Angela Merkel will host the leaders of France, Italy and the European Union in Berlin on Monday amid fears Britain's vote to leave will create a domino effect in eurosceptic member states ... RELATED....
« back to news headlines
A makerspace for students, by students (MIT - Massachusetts Institute of Technology)
Edit Public Technologies 23 Jun 2016
(Source. MIT - Massachusetts Institute of Technology) ... That's because MakerWorks, a soup-to-nuts community space offering both fabrication and measurement tools, is run by and for students. In fact, MakerWorks was student-initiated too ... MakerWorks also houses 12 fundamental machines - in many cases, multiples of each - including a mill, a lathe, a water-jet, a laser cutter, a router, a 3-D printer, a bandsaw, a drill press, and more....
Staring into the Past and the Future at Rattlesnake Lake
Edit Medium 13 Jun 2016
We gazed in stunned silence at what remained of Rattlesnake Lake. Our shoes sank into the silty mud, some of the first to touch this ground in a century ... I’d read the article a few days before, my mouth spreading wide into a grin and a grimace ... I had to go see for myself ... The trans-continental railroads were only decades old when when the first settlers of Moncton entered this pristine forest armed with axes and bandsaws ... ....
Lethal Toll of Non-lethal Weapons
Edit Kashmir Observer 13 Jun 2016
ON April 21, 23-year-old Hilal Ahmad Ganai, of Barpora, Pulwama, was hit by pellets in his chest, head and face after police fired air guns towards the youth protesting against the vandalisation of the local graveyard. He was brought to Sri Maharaja Hari Singh Hospital in Srinagar where doctors said his right eye had lost vision ... They gave the same diagnosis ... Dr ... Dr ... Dr ... Before his blindness, Malla worked at his father’s bandsaw ... Says Dr ... ....
Lapsed food certificates, missing allergen warning: Cumberland County restaurant inspections, Feb. 7-13
Edit Penn Live 04 Mar 2016
Observed chocolate residue on the scraper inside the barrel; dried food residue on the underside of the mashed potato mixer; observed dried meat debris on the grill in the front service area; observed residue on the knives, knife holder and bandsaw blade guide in the meat cutting room; observed a large accumulation of grease and food debris on the ......
This Crazy Contraption Makes Beautiful Music Using Marbles
Edit Huffington Post 03 Mar 2016
You've heard of people losing their marbles. Martin Molin is using his -- 2,000 to be exact. The Sweden-based musician has spent the last 14 months working on a musical instrument that uses marbles to play both melody and rhythm. Molin officially unveiled his "Marble Machine" on Feb ... Molin built the machine himself, even taking on the expense of buying various woodworking tools, including a bandsaw, table saw and drill press ... ....
Resawing Boards with a Band Saw
Edit About.com 22 Feb 2016
Your Bandsaw Can Be Used for Resawing. (c) 2013 Chris Baylor licensed to About.com, Inc. Resawing is a woodworking technique for ripping boards from larger stock using a band saw. This type of cutting requires use of a wider band saw blade than blades used for cutting curves, allowing for a flatter face cut of the veneer ... Aftermarket fences with micro adjustments are ideal for resawing, particularly for resawing thin veneers ... ....
How some wood turned into a lovely flower (Shopsmith Inc)
Edit Public Technologies 19 Jan 2016
(Source. Shopsmith Inc). A few truths are beginning to emerge on this Shopsmith news blog. First, you don't have to be a master craftsman to produce a masterpiece. It mostly takes the combination of these four things ... The creator of this lovely turned bowl has a physics degree and is an engineer ... The flower bowl was not made using the bandsaw method ... He used a bandsaw, jigsaw and sander to create the many small shapes ... In his words… ... J....
Global and China Bi-Metal Band Saw Blade Industry Report, 2015-2018
Edit PR Newswire 12 Jan 2016
LONDON, Jan ... In 2014, China's output of sawing machine fell for three consecutive years to about 50,480 sets, and the sales volume of corresponding bi-metal band saw blade approximated 48.708 million meters, edging down 1.5% from 2013 ... In the first quarter of FY2015, the Amada Group made revenue of JPY7.571 billion from Bandsaws Division, 8.4% higher than that in the same period of FY2014, accounting for 13.3% of its total revenue ... Tel....
Moving on to his own workshop
Edit Otago Daily Times 08 Jan 2016
Previous .. Next. ... With Simon Hartley, Mr Batts looks back on changes over those six decades. There are "blokes' sheds'' and then there is Graham Batts' workshop at the family home in Dunedin. Not a huge, sprawling double garage jumbled with ancient lathes and dubious rusted bandsaws, but a precise, meticulously planned and assembled workshop where there is a place for everything and everything is in its place ... Mr Batts said ... ....
The one about the guy who built a canoe in his sunroom (Shopsmith Inc)
Edit Public Technologies 10 Dec 2015
(Source. Shopsmith Inc) ... No joke! Oh, I forgot to mention, you also need a few tools, a healthy amount of time to dedicate to the project and a willingness to sand, sand and sand some more! ... Mr ... He used the Mark V's bandsaw to cut the forms and its drum sander to sand the edges. With the help of his son, and the Mark V's table saw and bandsaw, he cut long cedar boards into the strips he would need to shape the hull of the canoe ... Mr ... (noodl....
Dona Dalton: Serious Fun (Philadelphia Art Alliance)
Edit Public Technologies 04 Dec 2015
(Source. Philadelphia Art Alliance). Philadelphia-based artist Dona Dalton makes serious toys. Her hand-crafted wooden objects blur the line between toys and sculpture, and ask us to take play seriously. These hand-painted pieces have the charm of old-fashioned wooden toys, whimsical animals on wheels, with articulable limbs. Dalton works with pine and poplar wood, using a bandsaw, a sander, a rotary carver, and a drill ... Kingfishers....
Safety technology provides assurance to abattoir workers (RIRDC - Rural Industries Research and Development Corporation) ...
Edit Public Technologies 02 Nov 2015
Southern Meats, based at Goulburn in southern New South Wales have invested in several BladeStop™ bandsaws. Southern Meats OH&S; Manager Claire Graham said four major incidents in five years involving traditional bandsaws resulted in 827 hours of lost time, and more than $100,000 in worker compensation claims ... Ms Graham says prior to the new technology it was hard to encourage people to learn how to operate the bandsaw....
MakeX: Mobile Makerspace for Teens (City of Palo Alto, CA)
Edit Public Technologies 30 Oct 2015
(Source. City of Palo Alto, CA). MakeX is a FREE community makerspace in the Cubberley Community Center that offers access to cuttingedge digital tools, power tools, and building materials ... FAQ Blurbs ... Who Staffs MakeX? ... What Tools are Available at MakeX? ... Fabricating tools include a 3D printer, laser cutter, bandsaw, drill press, belt sander, metal grinder, and assorted hand tools ... How was MakeX started? ... What are MakeX's goals? ... (noodl....
- 1
- 2
- 3
- 4
- 5
- Next page »
