Digital Audio 101: Aliasing Explained

• Report rights infringement
• published: 11 Dec 2014
• views: 4669

More on aliasing: http://theproaudiofiles.com/digital-audio-aliasing/ The Mix Academy: http://bit.ly/mixacademy Learn compression: http://learncompression.com Learn to mix hip-hop: http://mixinghiphop.com Ear training: http://quiztones.com An introduction to the concept of aliasing in digital audio including what it is and what it sounds like. — Aliasing is one of the more complex concepts of digital audio. Luckily, most audio engineers can spend their days being creative rather than having to worry about it. Nonetheless, understanding aliasing actually helps explain a lot about how digital works. *Aliasing 101* When a signal is sampled, it is inherently band-limited in frequency. In other words, when a signal is sampled by a finite number of points, it cannot represent an infinite range of frequencies. A conventional D-to-A converter for audio will only create signals within a specific frequency range that is determined by the sampling rate. If there are any recorded frequencies outside of this range, they are interpreted by the converter and mapped to frequencies within this range. This is aliasing — when one frequency is coded as a different frequency. *Nyquist Frequency* The sampling rate determines this frequency range because it sets the Nyquist frequency. The Nyquist frequency is the maximum frequency that can be recorded by a specific sampling rate. The Nyquist frequency is half of the sampling rate. When it comes to audio recording, if the sampling rate is 48,000 samples per second, the Nyquist frequency is 24,000 Hz. If the sampling rate is 44,100 samples per second, the Nyquist frequency is 22,050 Hz. If a signal contains any frequencies greater than the Nyquist frequency, they are interpreted by the converter and mapped to frequencies less than the Nyquist frequency. *Anti-Aliasing Filter* Aliasing would be a big problem for digital audio, because it is usually not desired for frequencies to change in a signal. The good thing is that there is a dedicated component to prevent aliasing as part of the analog-to-digital and digital-to-analog conversion process. This component is called an anti-aliasing filter. Conceptually, the anti-aliasing filter blocks frequencies above the Nyquist frequency from being converted. This is going to prevent any signals from changing frequency during the conversion process.