Brake (sheet metal bending)
A brake is a metalworking machine that allows the bending of sheet metal. A cornice brake only allows for simple bends and creases, while a box-and-pan brake also allows one to form box and pan shapes. It is also known as a bending machine or bending brake or in Britain as a sheet metal folder or just a folder.
Description
The brake consists of a flat surface onto which the material is placed, and a clamping bar which will come down and hold the material firmly during the bend. This clamping action may be manual, automatic or operated using a foot pedal. The front, gate-like, plate of the machine is hinged and may be lifted, forcing the material extended over a straight edge to bend to follow the plate.
The bends can be to any angle up to a practical limit of about 120 degrees, somewhat more in the case of a bar folder. If the area to be bent is narrow enough, a sharper bend (e.g., for a hem) can be made by inserting the bend under the clamping bar and lowering it.
Podcasts:
How To
by: Axis Of Awesomestep one, head to a seedy part of town.
pull to the curb and look around
once you found one who looks alright
pick up the lady of the night
take her back to your hotel room
break off the handle of a broom
lay some plastic on the floor
creep up behind the dirty whore
hit her with the broom until she's dead
then dump the body but keep the head
no one will ever know who took her
now you know, how to kill a hooker
how to kill a hooker x2