M14 Rifle Marksmanship: "The Rifle" United States Marine Corps Training Film circa 1960s
NEW VERSION with improved video & sound: https://www.youtube.com/watch?v=O2AfDmKopsQ
more at
http://quickfound.net/links/military_news_and_links
.html
"A
US Marine Corps Training film from the
1960s that covers the basics of marksmanship and rifle care and maintenance."
Public domain film slightly cropped to remove uneven edges, with the aspect ratio corrected, and mild video noise reduction applied.
The soundtrack was also processed with volume normalization, noise reduction, clipping reduction, and/or equalization (the resulting sound, though not perfect, is far less noisy than the original).
http://en.wikipedia.org/wiki/M14_rifle
M14 rifle, formally the
United States Rifle,
7.62 mm, M14, is an
American selective fire automatic rifle firing
7.62×51mm NATO (
.308 Winchester) ammunition. It was the standard issue
U.S. rifle from
1959 to
1970. The M14 rifle was used for
U.S. Army and
Marine Corps basic and advanced individual training, and was the standard issue infantry rifle for
U.S. military personnel in the
Contiguous United States,
Europe, and
South Korea, until it was replaced by the
M16 rifle, in 1970. The M14 rifle remains in limited front line service within all branches of the U.S. military, and is also used as a ceremonial weapon by honor guards, color guards, drill teams, ceremonial guards, and the like.
The M14 rifle was also the last American "battle rifle" (a term applied to weapons firing full-power rifle ammunition, such as the
7.62mm cartridge) issued in quantity to U.S. military personnel. The M14 rifle also provides the basis for the
M21 and
M25 sniper rifles
...
Early development
The M14 was developed from a long line of experimental weapons based upon the M1 rifle. Although the M1 was among the most advanced infantry rifles of the late
1930s, it was not a perfect weapon. Modifications were beginning to be made to the basic M1 rifle's design since the twilight of
World War II.
Changes included adding fully automatic firing capability and replacing the 8-round en bloc clips with a detachable box magazine holding 20 rounds.
Winchester,
Remington, and
Springfield Armory's own
John Garand offered different conversions. Garand's design, the
T20, was the most popular, and T20 prototypes served as the basis for a number of
Springfield test rifles from
1945 through the early
1950s.
In 1945, Earle
Harvey of Springfield Armory designed a completely different rifle, the
T25, for the new
T65 .30 Light Rifle cartridge at the direction of Col. Rene Studler, then serving in the
Pentagon. In late 1945 the two men were transferred to Springfield Armory, where work on the T25 continued. The T-25 was designed to use the T65 service cartridge, a
Frankford Arsenal design based upon
.30-06 cartridge case used in the M1 service rifle, but shortened to the length of the
.300 Savage case. Although shorter than the .30-06, with less powder capacity, the T65 cartridge retained the ballistics and energy of the .30-06 due to the use of a recently developed ball powder made by
Olin Industries. After experimenting with several bullet designs, the T65 was finalized for adoption as the
7.62x51mm NATO cartridge. Olin Industries later marketed the cartridge on the commercial market as the commercial .308 Winchester round. After a series of revisions by Earle Harvey and other members of the .30 Light Rifle design group following the
1950 Ft. Benning tests, the T25 was renamed the
T47.
In contrast, the
T44 prototype service rifle was not principally designed by any single engineer at Springfield Armory, but rather was a conventional design developed on a shoestring budget as an alternative to the T47. With only minimal funds available, the earliest T44 prototypes simply used T20E2 receivers fitted with magazine filler blocks and re-barreled for
7.62mm NATO, with the long operating rod/piston of the M1 replaced by the T47's gas cut-off system.
Lloyd Corbett, an engineer in Earle
Harvey's rifle design group, added various refinements to the T44 design, including a straight operating rod and a bolt roller to reduce friction...
In June 1954, funding was finally made available to manufacture newly fabricated T44 receivers specially designed for the shorter T65 cartridge. This one change to the T44 design saved a pound in rifle weight over that of the M1 Garand.
Tests at Ft. Benning with the T44 and
T48 continued through the summer and fall of
1956. By this time, the T48/
FAL rifles had been so improved that malfunction rates were almost as low as the T44
.
In the end, the T44 was selected over the T48/FAL primarily because of weight (the T44 was a pound lighter than the T48), simplicity (the T44 had fewer parts), the T44's self-compensating gas system, and the argument that the T44 could be manufactured on existing machinery built for the M1 rifle (a concept that later turned out to be unworkable). In
1957, the U.S. formally adopted the T44 as the U.S. infantry service rifle, designated M14...