- published: 05 Nov 2015
- views: 64746
A wire stripper is a small, hand-held device used to strip the electrical insulation from electric wires.
A simple manual wire stripper is a pair of opposing blades much like scissors or wire cutters. The addition of a center notch makes it easier to cut the insulation without cutting the wire. This type of wire stripper is used by rotating it around the insulation while applying pressure in order to make a cut around the insulation. Since the insulation is not bonded to the wire, it then pulls easily off the end. This is the most versatile type of wire stripper.
Another type of manual wire stripper is very similar to the simple design previously mentioned, except this type has several notches of varying size. This allows the user to match the notch size to the wire size, thereby eliminating the need for twisting. Once the device is clamped on, the remainder of the wire can simply be pulled out, leaving the insulation behind.
When engaged, an automatic wire stripper simultaneously grips the wire from one side and cuts and removes the insulation from the other. To use it, one simply has to place the wire in the jaws and squeeze the handle. While this device allows even a novice to strip most wires very quickly, it does have some drawbacks. An automatic wire stripper only works on wires in a certain size range. If a wire is too small it may be broken by the pulling force, and if a wire is too large it will not fit in the jaws. Some have an adjustable tension, which adjusts the strength of the gripping jaw, such as the knob below the jaw on the yellow strippers below. When stripping the wire, an individual should grip and pull outwards to prevent injury. Mechanized automatic wire strippers can strip 10 gauge or thinner wires.
Check out how to build this simple wire stripper to help make scrapping wire easier & quicker. All you need is a piece of wood, a razor blade, a drill, and a couple of screws. I'm big on recycling as many things as I can instead of just trashing them. Not only do I reuse all the wood scraps from redoing our house to build the projects I show here on YouTube, but I also scrap most of the metals I have on hand that I don't need anymore as well. This simple little stripper helped me shave hours off the time it was taking me to strip wires by hand. How to Clean Rusty Chrome with Aluminum Foil: https://youtu.be/Z0tTjgJGk0k Quick & Easy Way to Polish Brass: https://youtu.be/w0CwfkWqxRM How to Make Homemade Wood Stain: https://youtu.be/BQ0gzht_TXU How to Fix Dents in Wood: https://youtu.be/Z...
In this how-to video, Gary shows us how to use the new automatic, self-adjusting wire stripper from Klein Tools. To learn more about this product, visit http://www.kleintools.com/catalog/adjustable-wire-stripperscutters/self-adjusting-wire-strippercutter
Hey everyone, Thanks for watching my videos. Be sure to comment, rate and subscribe Also check me out on Facebook and Google + Facebook pages cdnbadass fan page - http://www.facebook.com/rednkgarage Youtuberzz group - http://www.facebook.com/groups/499734280042996/ Google+ https://plus.google.com/u/0/107240026915640987347
My first self made wire stripper. "Royalty Free Music from Bensound"
Demonstration of a cheap pair of Automatic Wire Strippers
Strip that copper wire easier witht his amazing tool! TNT Tooling has just proved that you can improve on perfection by their newest update to the WSA Wire Stripper! With its new slot to strip romex you dont have to worry about slicing yourself open with a razor ever again! This is not a paid advertisement. These are my honest thoughts and opinions on this tool. Check them out here! http://www.tnttooling.com/
Intro video of the Nitech CableX cable and wire stripper. For more info, please visit www.nitech.nl
wirestripping.net My part-time wire stripping business: Making 70 lb. copper nuggets at 125' per minute with the best homemade wire stripper. These DVD's can be purchased at wirestripping.net - Contact me at rock@volcano.net
auto wire strip & cut machine, automotive sensore wiring harness dedicated machine, Mail:sales@zsht-equipment.com Skype:gao.irene Tel/whatsApp:+86-18676147382 Web:http://zsht-equipment.com/
Tools purchased from the seller: electmall Видео работы китайского инструмента для зачистки жил кабеля. Photo and video works can be viewed at the following links. The tool is defective and does not cope with the main purpose. Despite adjustment availability. He tears external and internal isolation (Link to photo: https://yadi.sk/i/oYj32dZ8vhouc), removes not regularly (Link to photo: https://yadi.sk/i/_DzOmUwyvhowJ), and also cuts off a part of a copper vein (Link to photo: https://yadi.sk/i/vrS3ZrLVvhqvR) that shall not to do this tool categorically. Video of operation of this tool: https://youtu.be/ylMBh868w-I https://youtu.be/kUXV3CJF8S8 Photo: https://yadi.sk/i/d7ZN46RovhoqJ Video of operation of this tool: https://youtu.be/ylMBh868w-I https://youtu.be/kUXV3CJF8S8 Photo: https...
Tools purchased from the seller: electmall Продолжение видео о работе китайского инструмента для снятия жил кабеля Видео работы китайского инструмента для зачистки жил кабеля. Photo and video works can be viewed at the following links. The tool is defective and does not cope with the main purpose. Despite adjustment availability. He tears external and internal isolation (Link to photo: https://yadi.sk/i/oYj32dZ8vhouc), removes not regularly (Link to photo: https://yadi.sk/i/_DzOmUwyvhowJ), and also cuts off a part of a copper vein (Link to photo: https://yadi.sk/i/vrS3ZrLVvhqvR) that shall not to do this tool categorically. Video of operation of this tool: https://youtu.be/ylMBh868w-I https://youtu.be/kUXV3CJF8S8 Photo: https://yadi.sk/i/d7ZN46RovhoqJ Video of operation of this tool:...
Project no.20 The Best Diy Wire Stripper This Homemade Wire Stripper can Cut in many Sizes 10-18-23 Gauge Wire. Its also Easy to Use and Strip Fast Without Damaging the Copper inside. By making this project you only need a long nose pliers and a 4mm drill bit. Like Share Subscribe for a Weekly Videos
Instagram ► https://goo.gl/J5zyyv @gammanfredi Twitter ► https://goo.gl/wOp0i3 @ga_manfredi Music Tobu - Hope [NCS Release] https://www.youtube.com/watch?v=EP625xQIGzs Follow Tobu: http://www.7obu.com http://www.soundcloud.com/7obu http://www.facebook.com/tobuofficial http://www.twitter.com/tobuofficial http://www.youtube.com/tobuofficial
My review here(весь обзор тут): https://goo.gl/lBuvlv Manual scrap wire and cable wire stripping machine old scrap cable wire strippers peeling machine manual stripping fixtures
Roger explains some methods for wire- and cable-stripping and separates useful and useless tools. Product: http://www.ak-modul-bus.de/stat/laborzubehoer.html Forum-Thread: https://forum.kainkalabs.com/forumdisplay.php?fid=13 German Channel: https://www.youtube.com/channel/UCvYdDS4b1EUVQoFhsJ9VhBQ Shop: http://www.ak-modul-bus.de/ twitter: https://twitter.com/kainkalabs facebook: https://facebook.com/kainkalabs
This video demonstrates how to change the blade on the Bluedog BWS-60 wire stripping machine. It shows step by step in real time and which tools you will require to do so. Since the BWS-60 wire stripping machine comes with 2 extra free blades this video will come in useful when you have to do a blade change over. To check out the BWS-60 go to: http://www.bluedogwirestripper.com/machines/bws-60
Visit my website for more Tips, Videos, DIY projects and more: http://www.mjlorton.com/ -----------------------------Click "Show more"--------------------------------------- A guide on using the correct tools to crimp connectors, strip wire and apply heat shrink. Please support my content creation by using my Amazon Store: http://astore.amazon.com/m0711-20 Buy these tools and connectors here: http://astore.amazon.com/m0711-20?node=10&page;=1 --------------------- Click "Show more" ------------------------------- My website and forum:- http://www.mjlorton.com Donations and contributions:- http://www.mjlorton.com My techie channel MJLorton - Solar Power and Electronic Measurement Equipment - http://www.youtube.com/MJLorton My Techie Amazon Store: http://astore.amazon.com/m0711-20 My other cha...
Just got this baby and as you will see had lil bit of trouble at 1st but fixed it made adjustments and smooth sailing after. Seller information fitnessweb on E bay link to store http://stores.ebay.com/COLLECTIBLES-CENTRAL?_trksid=p2047675.l2563 However i'm gpoing to try and get some money back because same machine for like $20 less granted i got 3 extra blades with the but it now price of $72.95 yes same style almost to a t lil different physical but the blades and crank arm are identical and two blades instead of 3 and shipping way less i'm asking them for refund of excessive charges and filing report to E bay GRRRRRRRR
works great still
【エマージェンザ2015 準決勝】
6 years now stripping and scrapping watch and learn as i get used to this new super machine.
This is part 2 of two videos that were made to show the process involved in restoring an automatic wire stripper to like new condition. You can find part 1 here: https://youtu.be/6RoDOellLEU In part 1, Chris shows the dis-assembly of the tool and explains his plans for restoring it. In part 2, Chris highlights the painting process which includes dipping the handles in Plasti-Dip. The parts were dry fit together to check for clearances between the paint and moving parts. Afterwards, Chris assembles the parts together and explains how they work as a whole. If you have any suggestions for videos on this channel, please feel free to leave them in the comments below. We'd love to hear from you! You can visit Chris' personal YouTube Channel here if you'd like: https://goo.gl/uA34YS Do...
OK broke this video down into 5 parts cause it tool to long to do on 1st use saved a bundle of time using my 4" Vice to hold stripper in hook up drill to it and after screwing around with differnt wires stranded and solid found it very quick as YOU will see live stripping 12 AWG and 14 AWG solid thick stranded 3 wires from a/c 8 foot long