- published: 10 Jan 2010
- views: 449601
Create your page here
Friday, 09 September 2016
-
remove the playlistAbrasive Blasting
-
remove the playlistLatest Videos
-
remove the playlistLongest Videos
- remove the playlistAbrasive Blasting
- remove the playlistLatest Videos
- remove the playlistLongest Videos
back to playlist
A review on a standard 40 pound also know as a 5 gallon Allsource Abrasive Blaster.
Features + Benefits
Capacity: 5 gallons
Holds approx. 40 lbs. of abrasives
Blasting Time: 20--30 minutes
Solid Frame
Handle for moving ease
Two feet for maximum stability
3/8in. brass valves for air throttling and sand metering
Adjustable pressure regulator
Moisture separator
Safety pressure relief valve
Includes Deadman II handle
Some assembly required
Central Pneumatic - item#68992
- published: 25 Mar 2013
- views: 126857
Product Page: http://www.harborfreight.com/40-lb-pressurized-abrasive-blaster-68992-8608.html
Pressurized design gives 30% more blasting power than siphon units.
More abrasives for truly efficient performance
Includes nozzle end shut-off valve, pressure gauge, ceramic nozzle, 8-1/2 foot hose, filling funnel, water trap, 6'' rubber wheels, and canvas hood
- published: 29 Sep 2011
- views: 436158
Choosing Your Abrasive Blasting Media can make a big difference to the final product. So why take risks, choose a abrasive blasting media that gets the job done right. www.dustlessblasting.com.au
- published: 05 Aug 2014
- views: 1975
ABS-World Abrasive blasting is the operation of forcibly propelling a stream of abrasive material against a surface under high pressure to smooth a rough surface, roughen a smooth surface, shape a surface, or remove surface contaminants.
A pressurized fluid, typically air, or a centrifugal wheel is used to propel the media.
There are several variants of the process in our scope of supply, such as bead blasting, sandblasting, sodablasting, and shot blasting .
If you need technical support just contact us salescoordinator.abs@gmail.com.
- published: 13 Nov 2012
- views: 3017
Abrasive Blasting in Public Areas on Gas Pipework. Blast It Clean It Paint It blasted pipework before being wrapped then placed in the ground for operational use. Work needed to be carried out in the City Centre's & Open Parklands. Sandblasting with Garnet abrasive ensured a quick 2.5 finish
- published: 26 Aug 2012
- views: 3921
For more info on EcoQuip Vapor Abrasive Equipment - including help deciding what EQ is right for you, purchase and rental rates, financing options, custom spray packages and Free Technical Assistance - call us toll-free at 1-888-CJSpray (1-888-257-7729) Monday - Friday 8am-5pm CST. We have trained EcoQuip Equipment Specialists ready to help you with any questions you may have.
- published: 19 Nov 2014
- views: 9832
BUY abrasive blasters here: http://www.eastwood.com/abrasive-blasting.html
On Episode 5 of Kevin's Korner - BLAST IT ALL! - Kevin Tetz shows us various media blasters offered by Eastwood to remove paint and rust.
Darn sand gets in everywhere! I guess the name "sandblasting" is only that... since sand has almost nothing to do with what we do in the hobby to get rid of paint and coatings. Like everything else, "media blasting" has gotten more sophisticated as time goes on.. and that's a great thing! I've seen dry ice blasting for historical buildings that leaves even the original painted bricks intact, soft mortar, all of it is not disturbed, but layers of ugly coatings are removed easily.. .and the best thing is that the ice evaporates leaving no residue behind that can hurt the environment... ( except the old paint)
One of the coolest things that Eastwood has come out with lately is the dual blaster system... it lets you blast separately with soda or something much more aggressive, and switch on the fly... or blend the two for a good mix of removal with minimal profiling. There's a fancy word... Profiling refers to the damage that the media ( sand, etc) does to the surface of the metal... IE- digging pits into the surface as it hits under pressure. SODA is very kind... leaving no profile at all, no pits... zero! In fact, with low pressure you can blast over chrome, plastic, and glass and not damage it... invest in some etching cleaner to prep your surface for coatings after using soda.... It leaves a film, which is good for corrosion protection, but bad for adhesion.... I've had a "spot-blaster' for years.... It's a great tool! Even has a little fixture for containing most of the blast media and not spreading it all over the shop, but it's limited because of the small tip. ( insert joke here.... IE- "that's what SHE said...") a blast cabinet is the cat's pajamas!!! Total isolation of the media, you can change the media relatively easily, and they're affordable with many different choices to fit whatever tool budget you have.
Bottom line.... Media blasting is one of the most effective, fastest, and affordable way to prep a surface for coatings..... if you're a tool freak like the rest of us, check out Eastwood's selection of abrasive blasting options.
Check out Kevin in this video!
Eastwood "Master Blaster" Dual Blaster lets you switch "on-the-fly" between soda and abrasive media, or a combination of both!
Eastwood's exclusive Master Blaster features our patent-pending "Mixing Valve" that lets you switch instantly between full-flow soda media for gentle-to-mild cleaning or paint removal on stainless, chrome, aluminum or fiberglass, and full-flow aggressive abrasive media for removing even the heaviest rust from frames and suspension components. Also allows infinite "on-the-fly" mixing of the two medias for controlled removal of paint or rust/corrosion on virtually any surface. A must for the serious restorer!
Switch between medias in seconds, or mix at an infinite ratio between the two
On-the-fly switching or mixing saves you money and cuts blasting times in half
Includes extra nozzles and moisture separator
- published: 27 Jul 2012
- views: 26387
Abrasive blasting
Abrasive blasting is the operation of forcibly propelling a stream of abrasive material against a surface under high pressure to smooth a rough surface, roughen a smooth surface, shape a surface, or remove surface contaminants. A pressurized fluid, typically compressed air, or a centrifugal wheel is used to propel the blasting material (often called the media). The first abrasive blasting process was patented by Benjamin Chew Tilghman on 18 October 1870.
There are several variants of the process, using various media; some are highly abrasive, whereas others are milder. The most abrasive are shot blasting (with metal shot) and sandblasting (with sand). Moderately abrasive variants include bead blasting (with plastic beads) and media blasting with ground-up walnut shells and corncobs. A mild version is sodablasting (with baking soda). In addition, there are alternatives that are barely abrasive or nonabrasive, such as ice blasting and dry-ice blasting.
Types
Wet abrasive blasting
This page contains text from Wikipedia, the Free Encyclopedia -
https://wn.com/Abrasive_blasting
This article is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License, which means that you can copy and modify it as long as the entire work (including additions) remains under this license.
This article is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License, which means that you can copy and modify it as long as the entire work (including additions) remains under this license.
- Loading...
-
5:53Applied Abrasive Blasting Equipment In Action
Applied Abrasive Blasting Equipment In Action -
8:08Abrasive Blaster 5-Gallon
Abrasive Blaster 5-GallonAbrasive Blaster 5-Gallon
A review on a standard 40 pound also know as a 5 gallon Allsource Abrasive Blaster. Features + Benefits Capacity: 5 gallons Holds approx. 40 lbs. of abrasives Blasting Time: 20--30 minutes Solid Frame Handle for moving ease Two feet for maximum stability 3/8in. brass valves for air throttling and sand metering Adjustable pressure regulator Moisture separator Safety pressure relief valve Includes Deadman II handle Some assembly required Central Pneumatic - item#68992 -
2:1940 Lb. Pressurized Abrasive Blaster #68992
40 Lb. Pressurized Abrasive Blaster #6899240 Lb. Pressurized Abrasive Blaster #68992
Product Page: http://www.harborfreight.com/40-lb-pressurized-abrasive-blaster-68992-8608.html Pressurized design gives 30% more blasting power than siphon units. More abrasives for truly efficient performance Includes nozzle end shut-off valve, pressure gauge, ceramic nozzle, 8-1/2 foot hose, filling funnel, water trap, 6'' rubber wheels, and canvas hood -
2:38Choosing Your Abrasive Blasting Media
Choosing Your Abrasive Blasting MediaChoosing Your Abrasive Blasting Media
Choosing Your Abrasive Blasting Media can make a big difference to the final product. So why take risks, choose a abrasive blasting media that gets the job done right. www.dustlessblasting.com.au -
4:59ABS WORLD Abrasive Blasting
ABS WORLD Abrasive BlastingABS WORLD Abrasive Blasting
ABS-World Abrasive blasting is the operation of forcibly propelling a stream of abrasive material against a surface under high pressure to smooth a rough surface, roughen a smooth surface, shape a surface, or remove surface contaminants. A pressurized fluid, typically air, or a centrifugal wheel is used to propel the media. There are several variants of the process in our scope of supply, such as bead blasting, sandblasting, sodablasting, and shot blasting . If you need technical support just contact us salescoordinator.abs@gmail.com. -
1:51Shot Blasting and How it works-
Shot Blasting and How it works- -
2:01Abrasive Blasting in Public Areas
Abrasive Blasting in Public AreasAbrasive Blasting in Public Areas
Abrasive Blasting in Public Areas on Gas Pipework. Blast It Clean It Paint It blasted pipework before being wrapped then placed in the ground for operational use. Work needed to be carried out in the City Centre's & Open Parklands. Sandblasting with Garnet abrasive ensured a quick 2.5 finish -
2:48EcoQuip Vapor Abrasive Blast Equipment from Graco
EcoQuip Vapor Abrasive Blast Equipment from GracoEcoQuip Vapor Abrasive Blast Equipment from Graco
For more info on EcoQuip Vapor Abrasive Equipment - including help deciding what EQ is right for you, purchase and rental rates, financing options, custom spray packages and Free Technical Assistance - call us toll-free at 1-888-CJSpray (1-888-257-7729) Monday - Friday 8am-5pm CST. We have trained EcoQuip Equipment Specialists ready to help you with any questions you may have. -
2:26Abrasive Blasting on Kevin's Korner with Kevin Tetz at Eastwood
Abrasive Blasting on Kevin's Korner with Kevin Tetz at EastwoodAbrasive Blasting on Kevin's Korner with Kevin Tetz at Eastwood
BUY abrasive blasters here: http://www.eastwood.com/abrasive-blasting.html On Episode 5 of Kevin's Korner - BLAST IT ALL! - Kevin Tetz shows us various media blasters offered by Eastwood to remove paint and rust. Darn sand gets in everywhere! I guess the name "sandblasting" is only that... since sand has almost nothing to do with what we do in the hobby to get rid of paint and coatings. Like everything else, "media blasting" has gotten more sophisticated as time goes on.. and that's a great thing! I've seen dry ice blasting for historical buildings that leaves even the original painted bricks intact, soft mortar, all of it is not disturbed, but layers of ugly coatings are removed easily.. .and the best thing is that the ice evaporates leaving no residue behind that can hurt the environment... ( except the old paint) One of the coolest things that Eastwood has come out with lately is the dual blaster system... it lets you blast separately with soda or something much more aggressive, and switch on the fly... or blend the two for a good mix of removal with minimal profiling. There's a fancy word... Profiling refers to the damage that the media ( sand, etc) does to the surface of the metal... IE- digging pits into the surface as it hits under pressure. SODA is very kind... leaving no profile at all, no pits... zero! In fact, with low pressure you can blast over chrome, plastic, and glass and not damage it... invest in some etching cleaner to prep your surface for coatings after using soda.... It leaves a film, which is good for corrosion protection, but bad for adhesion.... I've had a "spot-blaster' for years.... It's a great tool! Even has a little fixture for containing most of the blast media and not spreading it all over the shop, but it's limited because of the small tip. ( insert joke here.... IE- "that's what SHE said...") a blast cabinet is the cat's pajamas!!! Total isolation of the media, you can change the media relatively easily, and they're affordable with many different choices to fit whatever tool budget you have. Bottom line.... Media blasting is one of the most effective, fastest, and affordable way to prep a surface for coatings..... if you're a tool freak like the rest of us, check out Eastwood's selection of abrasive blasting options. Check out Kevin in this video! Eastwood "Master Blaster" Dual Blaster lets you switch "on-the-fly" between soda and abrasive media, or a combination of both! Eastwood's exclusive Master Blaster features our patent-pending "Mixing Valve" that lets you switch instantly between full-flow soda media for gentle-to-mild cleaning or paint removal on stainless, chrome, aluminum or fiberglass, and full-flow aggressive abrasive media for removing even the heaviest rust from frames and suspension components. Also allows infinite "on-the-fly" mixing of the two medias for controlled removal of paint or rust/corrosion on virtually any surface. A must for the serious restorer! Switch between medias in seconds, or mix at an infinite ratio between the two On-the-fly switching or mixing saves you money and cuts blasting times in half Includes extra nozzles and moisture separator -
1:30Wet-Abrasive Blasting - Various Jobs
Wet-Abrasive Blasting - Various Jobs
-
-
Abrasive Blaster 5-Gallon
A review on a standard 40 pound also know as a 5 gallon Allsource Abrasive Blaster. Features + Benefits Capacity: 5 gallons Holds approx. 40 lbs. of abrasives Blasting Time: 20--30 minutes Solid Frame Handle for moving ease Two feet for maximum stability 3/8in. brass valves for air throttling and sand metering Adjustable pressure regulator Moisture separator Safety pressure relief valve Includes Deadman II handle Some assembly required Central Pneumatic - item#68992 -
40 Lb. Pressurized Abrasive Blaster #68992
Product Page: http://www.harborfreight.com/40-lb-pressurized-abrasive-blaster-68992-8608.html Pressurized design gives 30% more blasting power than siphon units. More abrasives for truly efficient performance Includes nozzle end shut-off valve, pressure gauge, ceramic nozzle, 8-1/2 foot hose, filling funnel, water trap, 6'' rubber wheels, and canvas hood -
Choosing Your Abrasive Blasting Media
Choosing Your Abrasive Blasting Media can make a big difference to the final product. So why take risks, choose a abrasive blasting media that gets the job done right. www.dustlessblasting.com.au -
ABS WORLD Abrasive Blasting
ABS-World Abrasive blasting is the operation of forcibly propelling a stream of abrasive material against a surface under high pressure to smooth a rough surface, roughen a smooth surface, shape a surface, or remove surface contaminants. A pressurized fluid, typically air, or a centrifugal wheel is used to propel the media. There are several variants of the process in our scope of supply, such as bead blasting, sandblasting, sodablasting, and shot blasting . If you need technical support just contact us salescoordinator.abs@gmail.com. -
-
Abrasive Blasting in Public Areas
Abrasive Blasting in Public Areas on Gas Pipework. Blast It Clean It Paint It blasted pipework before being wrapped then placed in the ground for operational use. Work needed to be carried out in the City Centre's & Open Parklands. Sandblasting with Garnet abrasive ensured a quick 2.5 finish -
EcoQuip Vapor Abrasive Blast Equipment from Graco
For more info on EcoQuip Vapor Abrasive Equipment - including help deciding what EQ is right for you, purchase and rental rates, financing options, custom spray packages and Free Technical Assistance - call us toll-free at 1-888-CJSpray (1-888-257-7729) Monday - Friday 8am-5pm CST. We have trained EcoQuip Equipment Specialists ready to help you with any questions you may have. -
Abrasive Blasting on Kevin's Korner with Kevin Tetz at Eastwood
BUY abrasive blasters here: http://www.eastwood.com/abrasive-blasting.html On Episode 5 of Kevin's Korner - BLAST IT ALL! - Kevin Tetz shows us various media blasters offered by Eastwood to remove paint and rust. Darn sand gets in everywhere! I guess the name "sandblasting" is only that... since sand has almost nothing to do with what we do in the hobby to get rid of paint and coatings. Like everything else, "media blasting" has gotten more sophisticated as time goes on.. and that's a great thing! I've seen dry ice blasting for historical buildings that leaves even the original painted bricks intact, soft mortar, all of it is not disturbed, but layers of ugly coatings are removed easily.. .and the best thing is that the ice evaporates leaving no residue behind that can hurt the envi... -
Applied Abrasive Blasting Equipment In Action
- Order: Reorder
- Duration: 5:53
- Updated: 10 Jan 2010
- views: 449601
www.appliedpi.com - Applied Abrasive Blasting - Applied 40 Litre Blast Pot In Action - Blasting the bonnet of a vintage tractor, a tractor wheel and removing gr...
www.appliedpi.com - Applied Abrasive Blasting - Applied 40 Litre Blast Pot In Action - Blasting the bonnet of a vintage tractor, a tractor wheel and removing grafitti from a wall - www.appliedpi.com
wn.com/Applied Abrasive Blasting Equipment In Action
Abrasive Blaster 5-Gallon
- Order: Reorder
- Duration: 8:08
- Updated: 25 Mar 2013
- views: 126857
A review on a standard 40 pound also know as a 5 gallon Allsource Abrasive Blaster.
Features + Benefits
Capacity: 5 gallons
Holds approx. 40 lbs. of...
A review on a standard 40 pound also know as a 5 gallon Allsource Abrasive Blaster.
Features + Benefits
Capacity: 5 gallons
Holds approx. 40 lbs. of abrasives
Blasting Time: 20--30 minutes
Solid Frame
Handle for moving ease
Two feet for maximum stability
3/8in. brass valves for air throttling and sand metering
Adjustable pressure regulator
Moisture separator
Safety pressure relief valve
Includes Deadman II handle
Some assembly required
Central Pneumatic - item#68992
wn.com/Abrasive Blaster 5 Gallon
A review on a standard 40 pound also know as a 5 gallon Allsource Abrasive Blaster.
Features + Benefits
Capacity: 5 gallons
Holds approx. 40 lbs. of abrasives
Blasting Time: 20--30 minutes
Solid Frame
Handle for moving ease
Two feet for maximum stability
3/8in. brass valves for air throttling and sand metering
Adjustable pressure regulator
Moisture separator
Safety pressure relief valve
Includes Deadman II handle
Some assembly required
Central Pneumatic - item#68992
- published: 25 Mar 2013
- views: 126857
40 Lb. Pressurized Abrasive Blaster #68992
- Order: Reorder
- Duration: 2:19
- Updated: 29 Sep 2011
- views: 436158
Product Page: http://www.harborfreight.com/40-lb-pressurized-abrasive-blaster-68992-8608.html
Pressurized design gives 30% more blasting power than siphon unit...
Product Page: http://www.harborfreight.com/40-lb-pressurized-abrasive-blaster-68992-8608.html
Pressurized design gives 30% more blasting power than siphon units.
More abrasives for truly efficient performance
Includes nozzle end shut-off valve, pressure gauge, ceramic nozzle, 8-1/2 foot hose, filling funnel, water trap, 6'' rubber wheels, and canvas hood
wn.com/40 Lb. Pressurized Abrasive Blaster 68992
Product Page: http://www.harborfreight.com/40-lb-pressurized-abrasive-blaster-68992-8608.html
Pressurized design gives 30% more blasting power than siphon units.
More abrasives for truly efficient performance
Includes nozzle end shut-off valve, pressure gauge, ceramic nozzle, 8-1/2 foot hose, filling funnel, water trap, 6'' rubber wheels, and canvas hood
- published: 29 Sep 2011
- views: 436158
Choosing Your Abrasive Blasting Media
- Order: Reorder
- Duration: 2:38
- Updated: 05 Aug 2014
- views: 1975
Choosing Your Abrasive Blasting Media can make a big difference to the final product. So why take risks, choose a abrasive blasting media that gets the job done...
Choosing Your Abrasive Blasting Media can make a big difference to the final product. So why take risks, choose a abrasive blasting media that gets the job done right. www.dustlessblasting.com.au
wn.com/Choosing Your Abrasive Blasting Media
Choosing Your Abrasive Blasting Media can make a big difference to the final product. So why take risks, choose a abrasive blasting media that gets the job done right. www.dustlessblasting.com.au
- published: 05 Aug 2014
- views: 1975
ABS WORLD Abrasive Blasting
- Order: Reorder
- Duration: 4:59
- Updated: 13 Nov 2012
- views: 3017
ABS-World Abrasive blasting is the operation of forcibly propelling a stream of abrasive material against a surface under high pressure to smooth a rough surfac...
ABS-World Abrasive blasting is the operation of forcibly propelling a stream of abrasive material against a surface under high pressure to smooth a rough surface, roughen a smooth surface, shape a surface, or remove surface contaminants.
A pressurized fluid, typically air, or a centrifugal wheel is used to propel the media.
There are several variants of the process in our scope of supply, such as bead blasting, sandblasting, sodablasting, and shot blasting .
If you need technical support just contact us salescoordinator.abs@gmail.com.
wn.com/Abs World Abrasive Blasting
ABS-World Abrasive blasting is the operation of forcibly propelling a stream of abrasive material against a surface under high pressure to smooth a rough surface, roughen a smooth surface, shape a surface, or remove surface contaminants.
A pressurized fluid, typically air, or a centrifugal wheel is used to propel the media.
There are several variants of the process in our scope of supply, such as bead blasting, sandblasting, sodablasting, and shot blasting .
If you need technical support just contact us salescoordinator.abs@gmail.com.
- published: 13 Nov 2012
- views: 3017
Shot Blasting and How it works-
- Order: Reorder
- Duration: 1:51
- Updated: 14 Jan 2014
- views: 27791
http://www.concreteideas.com/ - This Video show's you how a shot blasting machine works, and how it can be used to profile and blast a concrete floor surface be...
http://www.concreteideas.com/ - This Video show's you how a shot blasting machine works, and how it can be used to profile and blast a concrete floor surface before installing a coating system.
wn.com/Shot Blasting And How It Works
Abrasive Blasting in Public Areas
- Order: Reorder
- Duration: 2:01
- Updated: 26 Aug 2012
- views: 3921
Abrasive Blasting in Public Areas on Gas Pipework. Blast It Clean It Paint It blasted pipework before being wrapped then placed in the ground for operational us...
Abrasive Blasting in Public Areas on Gas Pipework. Blast It Clean It Paint It blasted pipework before being wrapped then placed in the ground for operational use. Work needed to be carried out in the City Centre's & Open Parklands. Sandblasting with Garnet abrasive ensured a quick 2.5 finish
wn.com/Abrasive Blasting In Public Areas
Abrasive Blasting in Public Areas on Gas Pipework. Blast It Clean It Paint It blasted pipework before being wrapped then placed in the ground for operational use. Work needed to be carried out in the City Centre's & Open Parklands. Sandblasting with Garnet abrasive ensured a quick 2.5 finish
- published: 26 Aug 2012
- views: 3921
EcoQuip Vapor Abrasive Blast Equipment from Graco
- Order: Reorder
- Duration: 2:48
- Updated: 19 Nov 2014
- views: 9832
For more info on EcoQuip Vapor Abrasive Equipment - including help deciding what EQ is right for you, purchase and rental rates, financing options, custom spray...
For more info on EcoQuip Vapor Abrasive Equipment - including help deciding what EQ is right for you, purchase and rental rates, financing options, custom spray packages and Free Technical Assistance - call us toll-free at 1-888-CJSpray (1-888-257-7729) Monday - Friday 8am-5pm CST. We have trained EcoQuip Equipment Specialists ready to help you with any questions you may have.
wn.com/Ecoquip Vapor Abrasive Blast Equipment From Graco
For more info on EcoQuip Vapor Abrasive Equipment - including help deciding what EQ is right for you, purchase and rental rates, financing options, custom spray packages and Free Technical Assistance - call us toll-free at 1-888-CJSpray (1-888-257-7729) Monday - Friday 8am-5pm CST. We have trained EcoQuip Equipment Specialists ready to help you with any questions you may have.
- published: 19 Nov 2014
- views: 9832
Abrasive Blasting on Kevin's Korner with Kevin Tetz at Eastwood
- Order: Reorder
- Duration: 2:26
- Updated: 27 Jul 2012
- views: 26387
BUY abrasive blasters here: http://www.eastwood.com/abrasive-blasting.html
On Episode 5 of Kevin's Korner - BLAST IT ALL! - Kevin Tetz shows us various media...
BUY abrasive blasters here: http://www.eastwood.com/abrasive-blasting.html
On Episode 5 of Kevin's Korner - BLAST IT ALL! - Kevin Tetz shows us various media blasters offered by Eastwood to remove paint and rust.
Darn sand gets in everywhere! I guess the name "sandblasting" is only that... since sand has almost nothing to do with what we do in the hobby to get rid of paint and coatings. Like everything else, "media blasting" has gotten more sophisticated as time goes on.. and that's a great thing! I've seen dry ice blasting for historical buildings that leaves even the original painted bricks intact, soft mortar, all of it is not disturbed, but layers of ugly coatings are removed easily.. .and the best thing is that the ice evaporates leaving no residue behind that can hurt the environment... ( except the old paint)
One of the coolest things that Eastwood has come out with lately is the dual blaster system... it lets you blast separately with soda or something much more aggressive, and switch on the fly... or blend the two for a good mix of removal with minimal profiling. There's a fancy word... Profiling refers to the damage that the media ( sand, etc) does to the surface of the metal... IE- digging pits into the surface as it hits under pressure. SODA is very kind... leaving no profile at all, no pits... zero! In fact, with low pressure you can blast over chrome, plastic, and glass and not damage it... invest in some etching cleaner to prep your surface for coatings after using soda.... It leaves a film, which is good for corrosion protection, but bad for adhesion.... I've had a "spot-blaster' for years.... It's a great tool! Even has a little fixture for containing most of the blast media and not spreading it all over the shop, but it's limited because of the small tip. ( insert joke here.... IE- "that's what SHE said...") a blast cabinet is the cat's pajamas!!! Total isolation of the media, you can change the media relatively easily, and they're affordable with many different choices to fit whatever tool budget you have.
Bottom line.... Media blasting is one of the most effective, fastest, and affordable way to prep a surface for coatings..... if you're a tool freak like the rest of us, check out Eastwood's selection of abrasive blasting options.
Check out Kevin in this video!
Eastwood "Master Blaster" Dual Blaster lets you switch "on-the-fly" between soda and abrasive media, or a combination of both!
Eastwood's exclusive Master Blaster features our patent-pending "Mixing Valve" that lets you switch instantly between full-flow soda media for gentle-to-mild cleaning or paint removal on stainless, chrome, aluminum or fiberglass, and full-flow aggressive abrasive media for removing even the heaviest rust from frames and suspension components. Also allows infinite "on-the-fly" mixing of the two medias for controlled removal of paint or rust/corrosion on virtually any surface. A must for the serious restorer!
Switch between medias in seconds, or mix at an infinite ratio between the two
On-the-fly switching or mixing saves you money and cuts blasting times in half
Includes extra nozzles and moisture separator
wn.com/Abrasive Blasting On Kevin's Korner With Kevin Tetz At Eastwood
BUY abrasive blasters here: http://www.eastwood.com/abrasive-blasting.html
On Episode 5 of Kevin's Korner - BLAST IT ALL! - Kevin Tetz shows us various media blasters offered by Eastwood to remove paint and rust.
Darn sand gets in everywhere! I guess the name "sandblasting" is only that... since sand has almost nothing to do with what we do in the hobby to get rid of paint and coatings. Like everything else, "media blasting" has gotten more sophisticated as time goes on.. and that's a great thing! I've seen dry ice blasting for historical buildings that leaves even the original painted bricks intact, soft mortar, all of it is not disturbed, but layers of ugly coatings are removed easily.. .and the best thing is that the ice evaporates leaving no residue behind that can hurt the environment... ( except the old paint)
One of the coolest things that Eastwood has come out with lately is the dual blaster system... it lets you blast separately with soda or something much more aggressive, and switch on the fly... or blend the two for a good mix of removal with minimal profiling. There's a fancy word... Profiling refers to the damage that the media ( sand, etc) does to the surface of the metal... IE- digging pits into the surface as it hits under pressure. SODA is very kind... leaving no profile at all, no pits... zero! In fact, with low pressure you can blast over chrome, plastic, and glass and not damage it... invest in some etching cleaner to prep your surface for coatings after using soda.... It leaves a film, which is good for corrosion protection, but bad for adhesion.... I've had a "spot-blaster' for years.... It's a great tool! Even has a little fixture for containing most of the blast media and not spreading it all over the shop, but it's limited because of the small tip. ( insert joke here.... IE- "that's what SHE said...") a blast cabinet is the cat's pajamas!!! Total isolation of the media, you can change the media relatively easily, and they're affordable with many different choices to fit whatever tool budget you have.
Bottom line.... Media blasting is one of the most effective, fastest, and affordable way to prep a surface for coatings..... if you're a tool freak like the rest of us, check out Eastwood's selection of abrasive blasting options.
Check out Kevin in this video!
Eastwood "Master Blaster" Dual Blaster lets you switch "on-the-fly" between soda and abrasive media, or a combination of both!
Eastwood's exclusive Master Blaster features our patent-pending "Mixing Valve" that lets you switch instantly between full-flow soda media for gentle-to-mild cleaning or paint removal on stainless, chrome, aluminum or fiberglass, and full-flow aggressive abrasive media for removing even the heaviest rust from frames and suspension components. Also allows infinite "on-the-fly" mixing of the two medias for controlled removal of paint or rust/corrosion on virtually any surface. A must for the serious restorer!
Switch between medias in seconds, or mix at an infinite ratio between the two
On-the-fly switching or mixing saves you money and cuts blasting times in half
Includes extra nozzles and moisture separator
- published: 27 Jul 2012
- views: 26387
Wet-Abrasive Blasting - Various Jobs
- Order: Reorder
- Duration: 1:30
- Updated: 13 Nov 2013
- views: 1507
Gilsen Ltd Wet Abrasive Blasting Service - this video shows the capability of this system with a range of different job types including, car panel paint removal...
Gilsen Ltd Wet Abrasive Blasting Service - this video shows the capability of this system with a range of different job types including, car panel paint removal, aluminium casing clean, dry cement removal, rust removal, wearther-board paint removal
wn.com/Wet Abrasive Blasting Various Jobs
-
Short blasting machine
Descaling of H R metal surface -
Media Blasting Cast Iron Radiators
For the past 2 days I have been trying to media blast my radiators. So far it's not going well at all. I can't seem to get the Black Diamond medium grit to go through my cheap pressure pot. I have even made larger nozzles in an effort to get some flow going. Nothing has worked so far. Next, I am going to get some fine grit to see if that will flow through this thing. I guess the fact that the largest nozzle is 1/8" and the Black Diamond medium requires a 1/4" nozzle is a clue that this pot is not meant for medium grit. -Don -
Blasting a rusty gas tank
DynaMo's blasting power, dustless blasting -
-
-
Q69 shot blasting machine video
steel structure shot blasting machine -
QGW shot blasting machine video
shot blasting machine for steel pipe -
-
-
Eco-Tech-Blasting-AUTO- Wet Blasting in Bellingham, WA
Automotive - Wet Blasting in Bellingham, Washington
Short blasting machine
- Order: Reorder
- Duration: 1:10
- Updated: 04 Sep 2016
- views: 11
Descaling of H R metal surface
Descaling of H R metal surface
wn.com/Short Blasting Machine
Media Blasting Cast Iron Radiators
- Order: Reorder
- Duration: 2:48
- Updated: 04 Sep 2016
- views: 8
For the past 2 days I have been trying to media blast my radiators. So far it's not going well at all. I can't seem to get the Black Diamond medium grit to go t...
For the past 2 days I have been trying to media blast my radiators. So far it's not going well at all. I can't seem to get the Black Diamond medium grit to go through my cheap pressure pot. I have even made larger nozzles in an effort to get some flow going. Nothing has worked so far.
Next, I am going to get some fine grit to see if that will flow through this thing. I guess the fact that the largest nozzle is 1/8" and the Black Diamond medium requires a 1/4" nozzle is a clue that this pot is not meant for medium grit.
-Don
wn.com/Media Blasting Cast Iron Radiators
For the past 2 days I have been trying to media blast my radiators. So far it's not going well at all. I can't seem to get the Black Diamond medium grit to go through my cheap pressure pot. I have even made larger nozzles in an effort to get some flow going. Nothing has worked so far.
Next, I am going to get some fine grit to see if that will flow through this thing. I guess the fact that the largest nozzle is 1/8" and the Black Diamond medium requires a 1/4" nozzle is a clue that this pot is not meant for medium grit.
-Don
- published: 04 Sep 2016
- views: 8
Blasting a rusty gas tank
- Order: Reorder
- Duration: 9:30
- Updated: 04 Sep 2016
- views: 0
DynaMo's blasting power, dustless blasting
DynaMo's blasting power, dustless blasting
wn.com/Blasting A Rusty Gas Tank
DynaMo's blasting power, dustless blasting
- published: 04 Sep 2016
- views: 0
Steel Shot 110 Blasting Abrasive 50 lbs
- Order: Reorder
- Duration: 2:01
- Updated: 03 Sep 2016
- views: 0
Online http://www.amazon.com/dp/B00NUHB37E/?tag=superviz-20 Coupon for Steel Shot #110 Blasting Abrasive (50 lbs.). Find the lowest prices of Steel Shot #110 B...
Online http://www.amazon.com/dp/B00NUHB37E/?tag=superviz-20 Coupon for Steel Shot #110 Blasting Abrasive (50 lbs.). Find the lowest prices of Steel Shot #110 Blasting Abrasive (50 lbs.).
wn.com/Steel Shot 110 Blasting Abrasive 50 Lbs
Paint Removal
- Order: Reorder
- Duration: 10:29
- Updated: 03 Sep 2016
- views: 110
Sandblasting Perth WA 0401927431 Fast, Affordable, Reliable, Mobile Coatings Pty Ltd
Mobcoatings.com
Sandblasting Perth WA 0401927431 Fast, Affordable, Reliable, Mobile Coatings Pty Ltd
Mobcoatings.com
wn.com/Paint Removal
Q69 shot blasting machine video
- Order: Reorder
- Duration: 1:24
- Updated: 03 Sep 2016
- views: 2
steel structure shot blasting machine
steel structure shot blasting machine
wn.com/Q69 Shot Blasting Machine Video
steel structure shot blasting machine
- published: 03 Sep 2016
- views: 2
QGW shot blasting machine video
- Order: Reorder
- Duration: 0:44
- Updated: 03 Sep 2016
- views: 3
shot blasting machine for steel pipe
shot blasting machine for steel pipe
wn.com/Qgw Shot Blasting Machine Video
shot blasting machine for steel pipe
- published: 03 Sep 2016
- views: 3
Rust remove, paint remove wet sand blasting system
- Order: Reorder
- Duration: 0:26
- Updated: 03 Sep 2016
- views: 1
high pressure water sand blasting system
Model: GY-23/500; For rust remove, paint remove, scale cinder remove, heavy dirt cleaning; homepage: http://gybclea...
high pressure water sand blasting system
Model: GY-23/500; For rust remove, paint remove, scale cinder remove, heavy dirt cleaning; homepage: http://gybcleaner.en.alibaba.com/
wn.com/Rust Remove, Paint Remove Wet Sand Blasting System
Eco-Tech-Blasting-AUTO-Applications
- Order: Reorder
- Duration: 2:39
- Updated: 03 Sep 2016
- views: 0
Eco-Tech-Blasting-AUTO- Wet Blasting in Bellingham, WA
- Order: Reorder
- Duration: 1:24
- Updated: 03 Sep 2016
- views: 0
Automotive - Wet Blasting in Bellingham, Washington
Automotive - Wet Blasting in Bellingham, Washington
wn.com/Eco Tech Blasting Auto Wet Blasting In Bellingham, Wa
-
-
Blasting Cabinet Upgrade from Tacoma Company
After years of frustration using my cheap blasting cabinet from Tractor Supply (the same model you get from Harbor Freight), I finally decided it was time to upgrade the guts to make it a more usable system. I purchased a kit from the Tacoma Company that a viewer recommended to me. This video will go through the install process as well as show the final results that the product delivers. -
(Pt. 2) Proper Assembly - Harbor Freight Blast Cabinet
Tacoma Company - http://www.tacomacompany.com/ Mike: (509) 732-6286 Tacoma Company on Amazon http://amzn.to/1RIk2Lp Roark Supply - http://www.roarksupply.com/ 10% off Coupon Code: Metal Alvarez Metal Works - Facebook https://www.facebook.com/AlvarezMetalWorks -
KTA Lunch N' Learn Webinar: Understanding SSPC Abrasive Blast Cleaning Standards and SSPC- Vis 1
Learning objectives: -Understand the written SSPC abrasive blast cleaning standards -Understand the use of SSPC-VIS 1, Guide and Reference Photographs for Steel Surfaces Prepared by Dry Abrasive Blast Cleaning -
Sand Blasting Glass
introduction to sand blasting glass, covers resists, technique and operation of the sand blaster. -
-
Victor Safe Restoration - Part 6: Sand Blasting and Body Work
Here we strip all of the old paint and rust off of the body of the safe and then start the process of cleaning up the dents and dings with body filler. -
shot blasting machine for steel beam
Ruvii shot blasting machine. www.chinashotblasting.com www.ruvii.com Email: carina@ruvii.com Skype: fortuncj2 -
Gopro sandblasting and priming then sandblast and re-prime lol
well the first brush primer didn't go to well so we had to restart again lol oh well -
Shot Blasting machine with 3 blast wheels with overhead conveyor.
Airless Shot blasting machine for blasting of Transformers.
Respiratory Protection for Abrasive Blasters
- Order: Reorder
- Duration: 22:11
- Updated: 18 Apr 2015
- views: 312
The best safety video regarding respiratory protection for sandblasters yet! Produced by the E.D. Bullard Company. See www.BlastPrep.com for informative, helpf...
The best safety video regarding respiratory protection for sandblasters yet! Produced by the E.D. Bullard Company. See www.BlastPrep.com for informative, helpful blasting info.
wn.com/Respiratory Protection For Abrasive Blasters
Blasting Cabinet Upgrade from Tacoma Company
- Order: Reorder
- Duration: 37:58
- Updated: 31 Jul 2015
- views: 86120
After years of frustration using my cheap blasting cabinet from Tractor Supply (the same model you get from Harbor Freight), I finally decided it was time to up...
After years of frustration using my cheap blasting cabinet from Tractor Supply (the same model you get from Harbor Freight), I finally decided it was time to upgrade the guts to make it a more usable system. I purchased a kit from the Tacoma Company that a viewer recommended to me. This video will go through the install process as well as show the final results that the product delivers.
wn.com/Blasting Cabinet Upgrade From Tacoma Company
After years of frustration using my cheap blasting cabinet from Tractor Supply (the same model you get from Harbor Freight), I finally decided it was time to upgrade the guts to make it a more usable system. I purchased a kit from the Tacoma Company that a viewer recommended to me. This video will go through the install process as well as show the final results that the product delivers.
- published: 31 Jul 2015
- views: 86120
(Pt. 2) Proper Assembly - Harbor Freight Blast Cabinet
- Order: Reorder
- Duration: 99:16
- Updated: 03 Feb 2016
- views: 5914
Tacoma Company - http://www.tacomacompany.com/
Mike: (509) 732-6286
Tacoma Company on Amazon
http://amzn.to/1RIk2Lp
Roark Supply - http://www.roarksupply.com/...
Tacoma Company - http://www.tacomacompany.com/
Mike: (509) 732-6286
Tacoma Company on Amazon
http://amzn.to/1RIk2Lp
Roark Supply - http://www.roarksupply.com/
10% off Coupon Code: Metal
Alvarez Metal Works - Facebook
https://www.facebook.com/AlvarezMetalWorks
wn.com/(Pt. 2) Proper Assembly Harbor Freight Blast Cabinet
KTA Lunch N' Learn Webinar: Understanding SSPC Abrasive Blast Cleaning Standards and SSPC- Vis 1
- Order: Reorder
- Duration: 24:24
- Updated: 29 Mar 2016
- views: 326
Learning objectives:
-Understand the written SSPC abrasive blast cleaning standards
-Understand the use of SSPC-VIS 1, Guide and Reference Photographs for Steel...
Learning objectives:
-Understand the written SSPC abrasive blast cleaning standards
-Understand the use of SSPC-VIS 1, Guide and Reference Photographs for Steel Surfaces Prepared by Dry Abrasive Blast Cleaning
wn.com/Kta Lunch N' Learn Webinar Understanding Sspc Abrasive Blast Cleaning Standards And Sspc Vis 1
Sand Blasting Glass
- Order: Reorder
- Duration: 23:45
- Updated: 28 Nov 2011
- views: 30113
introduction to sand blasting glass, covers resists, technique and operation of the sand blaster.
introduction to sand blasting glass, covers resists, technique and operation of the sand blaster.
wn.com/Sand Blasting Glass
introduction to sand blasting glass, covers resists, technique and operation of the sand blaster.
- published: 28 Nov 2011
- views: 30113
Soda Blasting A Car Door Panel
- Order: Reorder
- Duration: 20:19
- Updated: 22 Mar 2016
- views: 636
Soda Blasting A Car Door Panel Using An Applied Multimedia Xtreme 40 Blasting Machine - Visit www.appliedpi.com for more information
Soda Blasting A Car Door Panel Using An Applied Multimedia Xtreme 40 Blasting Machine - Visit www.appliedpi.com for more information
wn.com/Soda Blasting A Car Door Panel
Victor Safe Restoration - Part 6: Sand Blasting and Body Work
- Order: Reorder
- Duration: 30:25
- Updated: 12 Aug 2014
- views: 20506
Here we strip all of the old paint and rust off of the body of the safe and then start the process of cleaning up the dents and dings with body filler.
Here we strip all of the old paint and rust off of the body of the safe and then start the process of cleaning up the dents and dings with body filler.
wn.com/Victor Safe Restoration Part 6 Sand Blasting And Body Work
Here we strip all of the old paint and rust off of the body of the safe and then start the process of cleaning up the dents and dings with body filler.
- published: 12 Aug 2014
- views: 20506
shot blasting machine for steel beam
- Order: Reorder
- Duration: 20:57
- Updated: 12 Aug 2014
- views: 314
Ruvii shot blasting machine.
www.chinashotblasting.com
www.ruvii.com
Email: carina@ruvii.com
Skype: fortuncj2
Ruvii shot blasting machine.
www.chinashotblasting.com
www.ruvii.com
Email: carina@ruvii.com
Skype: fortuncj2
wn.com/Shot Blasting Machine For Steel Beam
Ruvii shot blasting machine.
www.chinashotblasting.com
www.ruvii.com
Email: carina@ruvii.com
Skype: fortuncj2
- published: 12 Aug 2014
- views: 314
Gopro sandblasting and priming then sandblast and re-prime lol
- Order: Reorder
- Duration: 33:02
- Updated: 28 Nov 2014
- views: 9939
well the first brush primer didn't go to well so we had to restart again lol oh well
well the first brush primer didn't go to well so we had to restart again lol oh well
wn.com/Gopro Sandblasting And Priming Then Sandblast And Re Prime Lol
well the first brush primer didn't go to well so we had to restart again lol oh well
- published: 28 Nov 2014
- views: 9939
Shot Blasting machine with 3 blast wheels with overhead conveyor.
- Order: Reorder
- Duration: 20:30
- Updated: 23 Jul 2013
- views: 356
Airless Shot blasting machine for blasting of Transformers.
Airless Shot blasting machine for blasting of Transformers.
wn.com/Shot Blasting Machine With 3 Blast Wheels With Overhead Conveyor.
back
- Playlist
- Chat
back
- Playlist
- Chat
5:53
Applied Abrasive Blasting Equipment In Action
www.appliedpi.com - Applied Abrasive Blasting - Applied 40 Litre Blast Pot In Action - Bla...
published: 10 Jan 2010
Applied Abrasive Blasting Equipment In Action
Applied Abrasive Blasting Equipment In Action
- Report rights infringement
- published: 10 Jan 2010
- views: 449601
8:08
Abrasive Blaster 5-Gallon
A review on a standard 40 pound also know as a 5 gallon Allsource Abrasive Blaster.
Fea...
published: 25 Mar 2013
Abrasive Blaster 5-Gallon
Abrasive Blaster 5-Gallon
- Report rights infringement
- published: 25 Mar 2013
- views: 126857
2:19
40 Lb. Pressurized Abrasive Blaster #68992
Product Page: http://www.harborfreight.com/40-lb-pressurized-abrasive-blaster-68992-8608.h...
published: 29 Sep 2011
40 Lb. Pressurized Abrasive Blaster #68992
40 Lb. Pressurized Abrasive Blaster #68992
- Report rights infringement
- published: 29 Sep 2011
- views: 436158
2:38
Choosing Your Abrasive Blasting Media
Choosing Your Abrasive Blasting Media can make a big difference to the final product. So w...
published: 05 Aug 2014
Choosing Your Abrasive Blasting Media
Choosing Your Abrasive Blasting Media
- Report rights infringement
- published: 05 Aug 2014
- views: 1975
4:59
ABS WORLD Abrasive Blasting
ABS-World Abrasive blasting is the operation of forcibly propelling a stream of abrasive m...
published: 13 Nov 2012
ABS WORLD Abrasive Blasting
ABS WORLD Abrasive Blasting
- Report rights infringement
- published: 13 Nov 2012
- views: 3017
1:51
Shot Blasting and How it works-
http://www.concreteideas.com/ - This Video show's you how a shot blasting machine works, a...
published: 14 Jan 2014
Shot Blasting and How it works-
Shot Blasting and How it works-
- Report rights infringement
- published: 14 Jan 2014
- views: 27791
2:01
Abrasive Blasting in Public Areas
Abrasive Blasting in Public Areas on Gas Pipework. Blast It Clean It Paint It blasted pipe...
published: 26 Aug 2012
Abrasive Blasting in Public Areas
Abrasive Blasting in Public Areas
- Report rights infringement
- published: 26 Aug 2012
- views: 3921
2:48
EcoQuip Vapor Abrasive Blast Equipment from Graco
For more info on EcoQuip Vapor Abrasive Equipment - including help deciding what EQ is rig...
published: 19 Nov 2014
EcoQuip Vapor Abrasive Blast Equipment from Graco
EcoQuip Vapor Abrasive Blast Equipment from Graco
- Report rights infringement
- published: 19 Nov 2014
- views: 9832
2:26
Abrasive Blasting on Kevin's Korner with Kevin Tetz at Eastwood
BUY abrasive blasters here: http://www.eastwood.com/abrasive-blasting.html
On Episode 5 ...
published: 27 Jul 2012
Abrasive Blasting on Kevin's Korner with Kevin Tetz at Eastwood
Abrasive Blasting on Kevin's Korner with Kevin Tetz at Eastwood
- Report rights infringement
- published: 27 Jul 2012
- views: 26387
1:30
Wet-Abrasive Blasting - Various Jobs
Gilsen Ltd Wet Abrasive Blasting Service - this video shows the capability of this system ...
published: 13 Nov 2013
Wet-Abrasive Blasting - Various Jobs
Wet-Abrasive Blasting - Various Jobs
- Report rights infringement
- published: 13 Nov 2013
- views: 1507
back
- Playlist
- Chat
1:10
Short blasting machine
Descaling of H R metal surface
published: 04 Sep 2016
Short blasting machine
Short blasting machine
- Report rights infringement
- published: 04 Sep 2016
- views: 11
2:48
Media Blasting Cast Iron Radiators
For the past 2 days I have been trying to media blast my radiators. So far it's not going ...
published: 04 Sep 2016
Media Blasting Cast Iron Radiators
Media Blasting Cast Iron Radiators
- Report rights infringement
- published: 04 Sep 2016
- views: 8
9:30
Blasting a rusty gas tank
DynaMo's blasting power, dustless blasting
published: 04 Sep 2016
Blasting a rusty gas tank
Blasting a rusty gas tank
- Report rights infringement
- published: 04 Sep 2016
- views: 0
2:01
Steel Shot 110 Blasting Abrasive 50 lbs
Online http://www.amazon.com/dp/B00NUHB37E/?tag=superviz-20 Coupon for Steel Shot #110 Bl...
published: 03 Sep 2016
Steel Shot 110 Blasting Abrasive 50 lbs
10:29
Paint Removal
Sandblasting Perth WA 0401927431 Fast, Affordable, Reliable, Mobile Coatings Pty Ltd
Mob...
published: 03 Sep 2016
Paint Removal
Paint Removal
- Report rights infringement
- published: 03 Sep 2016
- views: 110
1:24
Q69 shot blasting machine video
steel structure shot blasting machine
published: 03 Sep 2016
Q69 shot blasting machine video
Q69 shot blasting machine video
- Report rights infringement
- published: 03 Sep 2016
- views: 2
0:44
QGW shot blasting machine video
shot blasting machine for steel pipe
published: 03 Sep 2016
QGW shot blasting machine video
QGW shot blasting machine video
- Report rights infringement
- published: 03 Sep 2016
- views: 3
0:26
Rust remove, paint remove wet sand blasting system
high pressure water sand blasting system
Model: GY-23/500; For rust remove, paint remove,...
published: 03 Sep 2016
Rust remove, paint remove wet sand blasting system
Rust remove, paint remove wet sand blasting system
- Report rights infringement
- published: 03 Sep 2016
- views: 1
2:39
Eco-Tech-Blasting-AUTO-Applications
Auto Applications - Wet Blasting in Bellingham, Washington
published: 03 Sep 2016
Eco-Tech-Blasting-AUTO-Applications
Eco-Tech-Blasting-AUTO-Applications
- Report rights infringement
- published: 03 Sep 2016
- views: 0
1:24
Eco-Tech-Blasting-AUTO- Wet Blasting in Bellingham, WA
Automotive - Wet Blasting in Bellingham, Washington
published: 03 Sep 2016
Eco-Tech-Blasting-AUTO- Wet Blasting in Bellingham, WA
Eco-Tech-Blasting-AUTO- Wet Blasting in Bellingham, WA
- Report rights infringement
- published: 03 Sep 2016
- views: 0
back
- Playlist
- Chat
22:11
Respiratory Protection for Abrasive Blasters
The best safety video regarding respiratory protection for sandblasters yet! Produced by t...
published: 18 Apr 2015
Respiratory Protection for Abrasive Blasters
Respiratory Protection for Abrasive Blasters
- Report rights infringement
- published: 18 Apr 2015
- views: 312
37:58
Blasting Cabinet Upgrade from Tacoma Company
After years of frustration using my cheap blasting cabinet from Tractor Supply (the same m...
published: 31 Jul 2015
Blasting Cabinet Upgrade from Tacoma Company
Blasting Cabinet Upgrade from Tacoma Company
- Report rights infringement
- published: 31 Jul 2015
- views: 86120
99:16
(Pt. 2) Proper Assembly - Harbor Freight Blast Cabinet
Tacoma Company - http://www.tacomacompany.com/
Mike: (509) 732-6286
Tacoma Company on Ama...
published: 03 Feb 2016
(Pt. 2) Proper Assembly - Harbor Freight Blast Cabinet
(Pt. 2) Proper Assembly - Harbor Freight Blast Cabinet
- Report rights infringement
- published: 03 Feb 2016
- views: 5914
24:24
KTA Lunch N' Learn Webinar: Understanding SSPC Abrasive Blast Cleaning Standards and SSPC- Vis 1
Learning objectives:
-Understand the written SSPC abrasive blast cleaning standards
-Under...
published: 29 Mar 2016
KTA Lunch N' Learn Webinar: Understanding SSPC Abrasive Blast Cleaning Standards and SSPC- Vis 1
KTA Lunch N' Learn Webinar: Understanding SSPC Abrasive Blast Cleaning Standards and SSPC- Vis 1
- Report rights infringement
- published: 29 Mar 2016
- views: 326
23:45
Sand Blasting Glass
introduction to sand blasting glass, covers resists, technique and operation of the sand b...
published: 28 Nov 2011
Sand Blasting Glass
Sand Blasting Glass
- Report rights infringement
- published: 28 Nov 2011
- views: 30113
20:19
Soda Blasting A Car Door Panel
Soda Blasting A Car Door Panel Using An Applied Multimedia Xtreme 40 Blasting Machine - Vi...
published: 22 Mar 2016
Soda Blasting A Car Door Panel
30:25
Victor Safe Restoration - Part 6: Sand Blasting and Body Work
Here we strip all of the old paint and rust off of the body of the safe and then start the...
published: 12 Aug 2014
Victor Safe Restoration - Part 6: Sand Blasting and Body Work
Victor Safe Restoration - Part 6: Sand Blasting and Body Work
- Report rights infringement
- published: 12 Aug 2014
- views: 20506
20:57
shot blasting machine for steel beam
Ruvii shot blasting machine.
www.chinashotblasting.com
www.ruvii.com
Email: carina@ruvii.c...
published: 12 Aug 2014
shot blasting machine for steel beam
shot blasting machine for steel beam
- Report rights infringement
- published: 12 Aug 2014
- views: 314
33:02
Gopro sandblasting and priming then sandblast and re-prime lol
well the first brush primer didn't go to well so we had to restart again lol oh well
published: 28 Nov 2014
Gopro sandblasting and priming then sandblast and re-prime lol
Gopro sandblasting and priming then sandblast and re-prime lol
- Report rights infringement
- published: 28 Nov 2014
- views: 9939
20:30
Shot Blasting machine with 3 blast wheels with overhead conveyor.
Airless Shot blasting machine for blasting of Transformers.
published: 23 Jul 2013
Shot Blasting machine with 3 blast wheels with overhead conveyor.
Shot Blasting machine with 3 blast wheels with overhead conveyor.
- Report rights infringement
- published: 23 Jul 2013
- views: 356
Respiratory Protection for Abrasive Blasters...
Blasting Cabinet Upgrade from Tacoma Company...
(Pt. 2) Proper Assembly - Harbor Freight Blast Cab...
KTA Lunch N' Learn Webinar: Understanding SSPC Abr...
Sand Blasting Glass...
Soda Blasting A Car Door Panel...
Victor Safe Restoration - Part 6: Sand Blasting an...
shot blasting machine for steel beam...
Gopro sandblasting and priming then sandblast and ...
Shot Blasting machine with 3 blast wheels with ove...
photo: Creative Commons / Gage Skidmore
Raw, emotional footage after 9/11 reveals the real Hillary Clinton
Edit The Guardian 09 Sep 2016
For the 15th anniversary, we partnered with WNYC to look back at Clinton at Ground Zero – a far cry from the controlled figure now a step away from the presidency. @edpilkington. It was 26 August 2003, almost two years since 9/11, and the sickening plume of smoke that hung over Ground Zero in lower Manhattan had long since dissipated ... The Clinton who emerges from the WNYC tapes is passionate, raw and unrestrained ... Twitter ... Twitter ... 9/11 ... ....
photo: Via YouTube
Facebook criticised after censoring ‘napalm girl’ photo
Edit The Irish Times 09 Sep 2016
Norway’s largest newspaper has published a front-page open letter to Facebook CEO Mark Zuckerberg, lambasting the company’s decision to censor a historic photograph of the Vietnam war and calling on Zuckerberg to recognize and live up to his role as “the world’s most powerful editor” ... “I am upset, disappointed – well, in fact even afraid – of what you are about to do to a mainstay of our democratic society,” he wrote ... ‘Good judgement’....
photo: CDC / Emory University, Dr. Thomas F. Sellers
Super-gonorrhoea outbreak could be out of control as attempts to stop spread fail
Edit The Independent 09 Sep 2016
An outbreak of super-gonorrhoea in the UK is out of control and efforts to stop it have been unsuccessful, health officials have warned ... Read more....
photo: AP / Wong Maye-E
Large Earthquake Reported Near Nuclear Testing Site in North Korea
Edit WorldNews.com 09 Sep 2016
South Korea and other international monitoring agencies reported an earthquake near North Korea's nuclear site in the northeastern portion of the country on Wednesday, indicating a fifth atomic test explosion, according to The News & Observer ... The U.S. Geological Survey called the event "an explosion" on their website ... mainland ... - WN.com, Maureen Foody....
photo: AP / Ryan Kang
Female Suspect, 14, Dead, Another Student Injured In Texas High School Shooting
Edit WorldNews.com 08 Sep 2016
A female student suspected of shooting a classmate at a West Texas high school Thursday morning has died, authorities said. The shooting prompted a lockdown at the school, NBC News reported.The armed suspect, a 14-year-old freshman, died of an apparent self-inflicted gunshot, and the victim was taken to a hospital, Brewster County Sheriff Ronny Dodson told reporters....
« back to news headlines
Blasting for new Vanderbilt Barnard residential college begins Monday, Sept. 12; will affect traffic on West End Avenue September 9, 2016 (Vanderbilt University)
Edit Public Technologies 09 Sep 2016
Constructioncrews working at the site of Vanderbilt University's new Vanderbilt Barnard residential college will begin blasting at the location on Monday, Sept ... The blasting is expected to continue through Oct ... Blasting will occur on weekdays at 10.30 a.m ... A 400-foot radius safety perimeter will be established prior to each blasting period....
Jet black iPhone 7 vulnerable to fine scratches
Edit The Jakarta Post 09 Sep 2016
When Apple unveiled the iPhone 7, people took issue with its lack of a headphone jack. But there’s another flaw worth noting ... Its surface is equally as hard as other anodized Apple products; however, its high shine may show fine micro-abrasions with use ... (Read also ... ....
The shortfalls of iPhone 7
Edit Deccan Chronicle 09 Sep 2016
Though the Apple iPhone 7 is one of the most powerful iPhones yet, there are a lot of drawbacks that the new device holds ... However, little does one may know until he reads a statement from Apple’s fine print that the Jet Black colour is prone to “fine micro-abrasions.” ... Its surface is equally as hard as other anodised Apple products; however, its high shine may show fine micro-abrasions with regular use ... Battery life ... ....
Bayonne police make arrest in convenience store robbery
Edit NJ dot com 09 Sep 2016
Around 3.39 a.m. on Aug ... The 22-year-old suffered a shoulder laceration and was taken to Jersey City Medical Center-Barnabas Health, while the 20-year-old was treated for minor abrasions to his face and hands, according to police. Today, police said they arrested Raekwon R. Grant of West Second Street on Sept ... . ....
Florida deputy injured in line of duty loses home in Hurricane Hermine
Edit Atlanta Journal 09 Sep 2016
Tragedy struck again for the family of a Taylor County sheriff’s deputy who survived a shotgun blast in the line of duty, when their home was destroyed in Hurricane Hermine. Deputy Robert Lundy was hit by a shotgun blast in 2014 while stopping an active shooter at a Perry, Florida, car dealership ... “(He took) a shotgun blast in ......
Release: RPM blasts Democrats for frivolous lawsuit (Republican Party of Minnesota)
Edit Public Technologies 09 Sep 2016
(Source. Republican Party of Minnesota). (Minneapolis, Minn.,) - Republican Party of Minnesota Chairman Keith Downey blasted Democrat Chairman Ken Martin and the Democrat Party for their frivolous petition to remove Donald Trump and Mike Pence from the ballot as baseless and politically corrupt ... With Mr ... Original documenthttp.//mngop.com/release-rpm-blasts-democrats-for-frivolous-lawsuit/ ... (noodl....
OSIRIS-REx Blasts off on 7 Year Sampling Trek to Asteroid Bennu and Back
Edit Universe Today 09 Sep 2016
KENNEDY SPACE CENTER, FL - NASA’s OSIRIS-REx hi tech robotic explorer blasted off this evening in spectacular fashion from the Florida Space Coast on a ground breaking 7 year sampling ... The post OSIRIS-REx Blasts off on 7 Year Sampling Trek to Asteroid Bennu and Back appeared first on Universe Today....
Wild times: Yanks walk off, gain ground
Edit MLB 09 Sep 2016
Austin's game-winning blast off Erasmo Ramirez moved the Yankees (74-65) within two games of the second American League Wild Card spot, trimming a half-game as they chase the idle Orioles and passing the Astros, who lost their game at Cleveland ... served up one of Souza's blasts while lasting just four-plus innings....
Rays swat four homers, but get walked off
Edit MLB 09 Sep 2016
Austin's game-winning blast off Erasmo Ramirez moved the Yankees (74-65) within two games of the second American League Wild Card spot, trimming a half-game as they chase the idle Orioles and passing the Astros, who lost their game at Cleveland ... served up one of Souza's blasts while lasting just four-plus innings....
North Korea's latest nuclear test: Q&A;
Edit The Times of India 09 Sep 2016
SEOUL. North Korea conducted a fifth nuclear test on Friday, an underground blast that Seoul quickly labelled its "most powerful to date". Here are some key questions around the blast and the isolated state's nuclear programme ... Its first nuclear test was in 2006 ... The bomb that destroyed Hiroshima had a yield of 15 kilotons, and the most powerful nuclear test ever was a Russian blast in 1961 with an estimated yield of 50,000 kilotons....
What Type Of Nuclear Weapon Did North Korea Just Detonate?
Edit IFL Science 09 Sep 2016
This follows on from another blast back in January of this year, and as was the case then, the type of nuclear device used is unclear ... The epicenter of the "earthquake". USGS ... “The 10-kilotonne blast was nearly twice as much as produced in the fourth nuclear test, and slightly less than the Hiroshima bombing,” said Kim Nam-wook, from South Korea’s meteorological agency, as reported by the Guardian. Next Page Next Page Full Article ....
Elon Musk: SpaceX rocket explosion is 'most difficult' failure in 14 years
Edit The Oklahoman 09 Sep 2016
Elon Musk is still trying to pinpoint the source of a huge chain of explosions that destroyed SpaceX's Falcon 9 rocket last week at Cape Canaveral ... The disaster struck on September 1 when a succession of blasts engulfed the rocket in flames over a period of more than four minutes ... NASA's facilities at Cape Canaveral were not damaged by the blasts, and no planned NASA flights were affected ... -- Chris Isidore contributed reporting. ....
- 1
- 2
- 3
- 4
- 5
- Next page »
