Light detection and ranging (LIDAR) microchip laser sales@dmphotonics.com

• Report rights infringement
• published: 16 Dec 2013
• views: 704

Light detection and ranging (LIDAR) microchip laser sales@dmphotonics.com The Microchip (MC) consists of a saturable absorber mirror bonded with a Nd:YVO4 laser crystal. The MC can be used to generate pulsed laser radiation at 1064 nm wavelength if pumped with a diode laser at 808 nm using passively Q-switching. Possible application areas of this laser radiation are: micromachining light detection and ranging (LIDAR) precision measurements frequency conversion 3 microchips The main advantage of a laser build with this microchip is the pump power dependent repetition rate with fixed pulse duration and pulse energy. By simply increasing the pump power at 808 nm the repetition rate - and consequently the average output power - will be increased proportionally starting from the laser threshold. The laser output is linear polarized with the polarization direction perpendicular to the groove in the copper heat sink Searches related to lidar lidar mapping police lidar lidar vs radar lidar accuracy lidar speed detection lidar detector lidar radar lidar speeding ticket Featured research: Lidar stands for LIght Detection and Ranging and is very similar to the better known Radar. Basically, a laser pulse is sent out of a transmitter and the light particles (photons) are scattered back to the receiver. The photons that come back to the receiver are collected with a telescope and counted as a function of time. Using the speed of light (~3X108 m/s) we can then calculate how far the photons have traveled round trip. Photons can be scattered back off of many different things, such as other particles (aerosols or molecules) in the atmosphere or your car (police laser radar) for instance. There are also many different ways to use the signal that is collected by the telescope. Some of these uses include; catching speeders, detecting aerosols (pollution, dust, etc.) in the atmosphere, detecting water vapor content in the atmosphere, measuring winds, as well as many other applications. The diagram below shows the basic concept of a lidar that uses particles in the air to scatter the out going photons back to the receiver. The background for this page, and many of our other ARSL pages, is actual lidar data showing the marine boundary layer with a dust plume above it. lidar sensor buy filter algorithm for airborne lidar data lidar sensor operator lidar sensor price lidar sensor arduino velodyne laser scanner lidar remote sensing airborne lidar