This article incorporates information from the equivalent article on the Japanese Wikipedia.

Honda N360/N600

Manufacturer	Honda
Also called	Honda LN360 Honda NIII360 Honda N400 Honda Scamp (Australia) Honda N600 Fu Gui (ROC)[1]
Production	1967–1972
Successor	Honda Life (N360) Honda Civic (N600)
Class	Kei car/city car
Body style	2-door sedan 2-door wagon ("Van")
Engine	354 cc EA air-cooled SOHC I2 402 cc EA I2 599 cc EA I2
Transmission	Four-speed manual constant mesh, dog-clutch engagement[2]
Wheelbase	78.2 in (1,986 mm)[2]
Length	118 in (2,997 mm)[2]
Width	51 in (1,295 mm)[2]
Height	53 in (1,346 mm)[2]
Curb weight	1,119 lb (508 kg)[2]
Related	Honda Life Honda TN360 Honda Vamos Honda Z360/Z600

The Honda N360 is a kei car, designed and built by Honda and produced from March 1967 through 1970, while its larger N600 brother lasted three more years. After a January 1970 facelift, the N360 became the NIII360 and continued in production until 1972. The car featured front wheel drive and an air-cooled, four stroke, 354 cc, 31 hp (23 kW) two-cylinder engine, and was borrowed from the Honda CB450 motorcycle. The displacement was reduced so as to comply with kei car legislation which stipulated maximum allowable engine displacement. This same engine was also used in the Honda Vamos, with a beam axle/leaf spring rear suspension. The "N" prefix stands for the Japanese word "norimono" which means "vehicle" in English. The exterior dimensions were in compliance with Japanese government regulations concerning kei cars, however, vehicles installed with the 402 cc and 599 cc engines were too large for the category, and were largely intended for international sales.

Versions[link]

1969 Honda N360 air-cooled engine

A two-door sedan was the original body style, with a two-door wagon (considered a commercial vehicle in Japan, and therefore called a "Van") called the LN360 coming in June of the first year. An upgraded 36 hp (27 kW) engine was added in October 1968 for the N360 T. A 402 cc engine was used in the similar N400. The engine's technological specifications reflected engineering efforts resulting from the development of the larger Honda 1300, which used an air-cooled 1.3 litre engine. One of the primary differences between the N360 and the Honda Life that followed was the N360/600 had an air-cooled engine, and the Life had a water-cooled engine. The water-cooled engine was better able to comply with newly enacted emission standards in Japan, and a move away from air-cooled, and two-stroke engines. As does the original Mini, but unlike the succeeding Life, the N360/600 had its gearbox mounted in the sump rather than bolted on as a separate unit.

The Hondamatic-equipped N360AT which appeared in August 1968 was the first kei car equipped with an automatic transmission.^[3]

N600[link]

The larger-engined N600 was developed alongside the N360 in order to target export markets like the US and Europe, where motorways demanded higher top speeds.^[4] Just seven months after road testing the N360, Britain’s Motor magazine tested a Honda N600 in November 1968. They reported that it had a top speed of 77.1 mph (124.1 km/h) and could accelerate from 0-60 mph (97 km/h) in 19 seconds. An overall fuel consumption of 36.3 miles per imperial gallon (7.78 L/100 km; 30.2 mpg_-US) was achieved. The test car was priced in the UK at £589 including taxes, at a time when the Mini 850 was retailing for £561. The testers were impressed to find 1100 performance from a 600 cc car, but found it ‘very noisy when extended’. They found the Honda as easy to drive and park, and ‘quite well equipped’. The performance figures put the car at or near the top of its class under most criteria, reflecting its favourable power-to-weight ratio.^[5] The car was thus 5 mph (8.0 km/h) faster than the 72 mph (116 km/h) achieved by rival magazine Autocar in an N360 in May 1968, and more than ten seconds quicker to 60 mph (97 km/h) which the N360 achieved in 29.3 seconds.^[2] Consistent with its slower performance, the N360 squeezed 3 extra miles out of a (UK) gallon of fuel, managing an overall 39.4 miles per imperial gallon (7.17 L/100 km; 32.8 mpg_-US).^[2]

1970 Honda N600 (US)

The N600 was introduced to the USA in 1969 as a 1970 model, and was the first Honda automobile to be officially imported to the United States. It was technologically advanced for its time, with an all alloy engine that could achieve 9000 rpm. Engine output was 36–45 hp (27–34 kW) and the N600 was capable of 81 mph (130 km/h). The lower-powered engine arrived in 1972; with milder cams and lowered compression it gave up some peak power and torque, while allowing for a less peaky delivery and higher drivability.^[6] It delivered surprisingly peppy performance because of its light weight (around 550 kg/1100 pounds), due to compact dimensions and some plastic parts (like the boot lid). The first brakes were very weak, despite having front discs and servo assistance. Rear suspension was a dead axle on leaf springs.

The N600 (along with the TN360 trucklet), were the first Honda cars to be assembled outside of Japan, with production in Taiwan by local joint venture Sanyang Industrial beginning in 1969.^[7] The N600 was called the Fu Gui, meaning 'Wealth' in Chinese (富貴).^[1]

Honda LN360 Van

US sales stopped in 1972, as for the sportier Honda Z600 (or Z, depending on country), after about 25,000 had been sold there.^[4] The first generation Honda Civic replaced these little cars with something a little more suited to the American Interstate system.

References[link]

http://en.wikipedia.org/wiki/File:HondaN360.jpg

External links[link]

• ThisOldHonda.org N360
• ThisOldHonda.org N600
• HondaN600.net

Wikimedia Commons has media related to: Honda N360