Foundry

How To Make The Mini Metal Foundry

Order: Reorder
Duration: 7:05
Updated: 13 Jan 2015
views: 4535800

How to make a simple backyard foundry for less than $20, for melting pop cans, and casting aluminum. $5 OFF on Harry's shaving products. Coupon Code: THEKINGOFRANDOM http://bit.ly/Harrys5 Subscribe for new videos every 5 days! http://bit.ly/TKoRSubscribe Join my email list! http://bit.ly/TKOREmailList For other project videos, check out http://www.thekingofrandom.com Social Media Links: Google+: http://bit.ly/plusgrant Facebook: http://bit.ly/FBTheKingOfRandom Instagram: http://bit.ly/instagrant Twitter: http://bit.ly/tweetgrant Pinterest: http://bit.ly/pingrant Tumblr: http://bit.ly/grantstumblr Endcard Links: Pop Can Metal Melting: http://bit.ly/PopCanMelting Secret Safe: http://bit.ly/SuperSecretSafe Acrylic Fire Piston: http://bit.ly/SlamRodFireStarter Bottle Rockets: http://bit.ly/HomebrewBottleRockets Music By: Scott & Brendo (“Feel It” - Instrumental) http://bit.ly/ScottBrendoiTunes Project Inspired By: This foundry is an original design, which comes after months of experimenting, and over 10 different prototypes. The functionality is founded on ideas I collected while searching the internet for different furnace designs. WARNING: Charcoal foundries can reach temperatures in excess of 1,000ºC, which is well above the melting point of hobbyists. This project should only be attempted with adequate knowledge and training, proper protective safety gear, and in a fire resistant area with adequate ventilation. The sparks flying from the foundry can ignite fires, and the fumes from burning dross can be toxic. Use caution and common sense. Use of this video content is at your own risk. Project History & More Info: For this project I experimented with 10 different prototypes, to develop a reusable backyard foundry that melts aluminum soda cans easily and safely. I tested different refractory recipes, different containers, different setting for blowing air, and different types of makeshift crucibles. I tried various ratios of portland cement, sand, perlite, plaster of paris, water, and even kitty litter. For containers, I experimented with clay pots, plastic buckets, no container, cinderblocks, and a galvanized steel pail. I ended up favoring the galvanized steel pail, and a mix of 50% plaster of paris, and 50% play sand, by volume, which was inspired by a video by NightHawkInLight "How to Make a Soup Can Forge" http://bit.ly/IBSoupCanForge Depending on where you get, or find, your materials the cost can range anywhere from $5-$25 per unit. With the materials I used, I was able to make 2 units for under $40 ($20 each). Even on the high end, this is probably one of the cheapest, reliable, backyard foundries that can be made. I used mine to melt soda cans, and extract the aluminum for future metal casting projects. All the soda cans came from a local recycling depot. I bought back 30 lbs from the depot to avoid having to drink gallons and gallons of soda. :) I stored the ingots in various forms, which you can see in the video”Melting Cans With The Mini Metal Foundry“ http://bit.ly/PopCanMelting The technique for making the sword in that video, and the gun in this video is called “Lost Foam Casting” and will be demonstrated in a future project video.

wn.com/How To Make The Mini Metal Foundry

How To Build A Simple Cheap Metal Foundry & Forge

Order: Reorder
Duration: 34:21
Updated: 28 Oct 2015
views: 399117

Inspired by Grant Thomas "The King Of Random" my friend Xaqaria & I decided to build our own larger metal foundry & forge for melting & forming aluminum soda cans into anything we want. WARNING: Charcoal foundries can reach temperatures in excess of 1,000ºC, which is well above the melting point of hobbyists. This project should only be attempted with adequate knowledge and training, proper protective safety gear, and in a fire resistant area with adequate ventilation. If the galvanized bucket reaches extreme temps it can give off toxic case so make sure your thermal barrier is sufficient. Also I don't recommend hand mixing Plaster of Paris, turns out the stuff is pretty toxic and can cause burns. Use a stick or mixer to avoid problems. I personally didn't encounter problems but I've been told my many to use caution. Use of this video content is at your own risk. ▼ Give Xaqaria a follow on Twitter, he's good people! ▼ https://twitter.com/xaqaria ▼ Donate if you enjoy my content and want to help support my channel ▼ http://bit.ly/helpbarnacules -or- Buy one of my T-Shirts @ http://shop.barnnerd.com ▼ More links below for discounts and to help the channel ▼ Shop Amazon US @ http://amazon.barnnerd.com Shop Amazon UK @ http://amazonuk.barnnerd.com Discount on GT Omega Chairs @ http://bit.ly/1lA4h4K -or- Use code 'NERDGASM' at checkout! ▼ End Credit Videos ▼ How To Setup, Light & Use a Green Screen - https://www.youtube.com/watch?v=o2FNfNYUemQ Tesla Autopilot in P85D Supercar, Scary as Hell! - https://www.youtube.com/watch?v=J6905HDRs04 ▼ Come talk to me... ▼ Twitter @ http://twitter.barnnerd.com Facebook me @ http://facebook.barnnerd.com Instagram @ http://instagram.barnnerd.com Email me @ BarnaculesManCave@gmail.com ▼ Check out the video that inspired this project [King of Random] ▼ https://youtu.be/hHD10DjxM1g ▼ Questions & Answers ▼ Q) Can this thing give off toxic fumes? A) Yes, you need to be careful and in a well ventilated area. The most dangerous fumes can come from the galvanized bucket if it reaches temps great than 900°F. The forge in this video never got hotter then 200°F on the exterior. Q) Can I make a bigger one to heat swords and blades? A) Yes, if you can find a bigger set of buckets you could make this thing use a whole bag of charcoal. Just remember to keep track of the temp and not to let it get 'too hot'. Q) How much charcoal did you burn? A) We went through a large bag and ran the thing for probably 4+ hours. Enough time to probably melt a thousand pop cans. It's actually not that expensive to run. I want to investigate a propane version of this same concept next to see if it's more efficient and easier to temp control. Q) Grant Thomas already did this, why did you do it? A) I always see projects online and wanted to see how hard it really is to create and also make a larger version. Turns out Grant was right on the money and the project works exactly as advertised. Go subscribe to his channel! Q) It's a foundry and not a forge!!! A) Actually it's both, I can use it to smelt metal or heat and form metal like knives. If you made a bigger version you could even work with swords (we might do this!) Q) That steak was disgusting, why did you do that? A) Just for lolz, and the steak was gross. That being said if we had wrapped it in aluminum foil first it would have been amazing! (if the foil didn't melt) :D Q) You told us to wrap steak in aluminum foil and put it on an aluminum forge? Won't it just melt? A) The temps on top of the forge vs. in the coals are dramatically different. You're not going to melt aluminum on the venting heat. Q) Just so you know. It is illegal in every state to discharge a fire extinguisher unless used to put out or control a fire or used in demonstration. It's also illegal to modify one. Not that i care. But somebody watching this video might. So be careful putting stuff like that on camera. Don't want any legal trouble over a simple science project. A) It was for a demonstration & the fire extinguisher was expired. We didn't modify the fire extinguisher, we destroyed it since it was expired so no laws were broken here.

wn.com/How To Build A Simple Cheap Metal Foundry Forge

John Mackey - FOUNDRY

Order: Reorder
Duration: 4:17
Updated: 21 Aug 2011
views: 233516

If you have a request for another song you don't see on Youtube, just ask and I'll work some big magic to see what I can do. Song (c) John Mackey

wn.com/John Mackey Foundry

Melting Cans With The Mini Metal Foundry

Order: Reorder
Duration: 6:50
Updated: 29 Dec 2014
views: 11611036

How to recycle scrap metal in the backyard, with a homemade, Mini Metal Foundry. Get "The Hobbit" http://bit.ly/TKOR-FreeAudiobook - Win the sword: http://bit.ly/WinTheSword Subscribe for new videos every 5 days! http://bit.ly/TKoRSubscribe Join my email list! http://bit.ly/TKOREmailList For other project videos, check out http://www.thekingofrandom.com Endcard links: Mini Fire Logs: http://bit.ly/MiniFireLogs Matchstick Gun: http://bit.ly/MiniMatchstickGun 5 Crazy Science Stunts: http://bit.ly/ScienceStunts Gravity Puzzle: http://bit.ly/GravityPuzzle Music by Scott & Brendo (“Skyward” - Instrumental) http://bit.ly/ScottBrendoiTunes Project inspired by: This foundry is an original design, which comes after months of experimenting, and over 10 different prototypes. The functionality is founded on ideas I collected while searching the internet for foundry designs. WARNING: Charcoal foundries can reach temperatures in excess of 1,000ºC, which is well above the melting point of hobbyists. This project should only be attempted with adequate knowledge and training, proper protective safety gear, and in a fire resistant area with adequate ventilation. The sparks flying from the foundry can ignite fires, and the fumes from burning dross can be toxic. Use caution and common sense. Use of this video content is at your own risk. Background: For as long as I can remember, I've been intrigued by the idea of melting metal and making things with it. The problem has always been that it was out of reach or required really expensive equipment. In this project I experimented with 10 different prototypes, to develop a reusable backyard foundry that melts aluminum soda cans easily and safely. I tested different refractory recipes, different containers, different setting for blowing air, and different types of makeshift crucibles. I tried various ratios of portland cement, sand, perlite, plaster of paris, water, and even kitty litter. For containers, I experimented with clay pots, plastic buckets, no container, cinderblocks, and a galvanized steel pail. I ended up favoring the galvanized steel pail, and a mix of 50% plaster of paris, and 50% play sand, by volume, which was inspired by a video by NightHawkInLight "How to Make a Soup Can Forge" http://bit.ly/IBSoupCanForge Depending on where you get, or find, your materials the cost can range anywhere from $5-$25 per unit. With the materials I used, I was able to make 2 units for under $40 ($20 each). Even on the high end, this is probably one of the cheapest, reliable, backyard foundries that can be made. I used mine to melt soda cans, and extract the aluminum for future metal casting projects. All the soda cans came from a local recycling depot. I bought back 30 lbs from the depot to avoid having to drink gallons and gallons of soda. :) I stored the ingots in various forms, which you can see in the next video, and tried a cool technique for making a little sword by pouring liquid metal into a bucket of sand. I'm planning to make a project video on how to do that in the near future. Thanks for watching, and please share!! :)

wn.com/Melting Cans With The Mini Metal Foundry

The Lunenburg Foundry

Order: Reorder
Duration: 12:11
Updated: 16 Aug 2012
views: 153134

A special thank you to the men at the foundry for allowing me to film, and ask them millions of questions.

wn.com/The Lunenburg Foundry

Homemade Propane Foundry Furnace Metal Aluminium Tutorial How To Make Build Part 1 of 4 Aluminum

Order: Reorder
Duration: 5:24
Updated: 10 Jan 2015
views: 108914

Homemade propane foundry furnace melt aluminium metal tutorial how to build part 1 of 4. Aluminum See the video of this foundry furnace in action: http://youtu.be/Ud38o-gpzHg See part 2 here: http://youtu.be/uDCfnNrXt08 See part 3 here: http://youtu.be/fUV6qJEuKic See part 4 here: http://youtu.be/IGCjbBWKGaQ?list=UUBIcEtzxRhP6ErveIH1ErwQ If you enjoyed this video please give me thumbs up, and comment. Any question please comment and I will be more than happy to answer them.

wn.com/Homemade Propane Foundry Furnace Metal Aluminium Tutorial How To Make Build Part 1 Of 4 Aluminum

Metal Casting at Home Part 10 Another Day in my Home Foundry

Order: Reorder
Duration: 9:25
Updated: 11 Oct 2009
views: 1437634

How to make a casting from making the sand mould to the finished item. The video has been edited to fit the 10 minute time limit of You tube. It takes much longer than this!

wn.com/Metal Casting At Home Part 10 Another Day In My Home Foundry

The "Gas Blaster" Propane Torch

Order: Reorder
Duration: 9:02
Updated: 30 Jan 2016
views: 599512

Turn common plumbing materials into a metal melting propane torch, and instantly convert your "flower-pot" foundry, to propane. Free Template: http://bit.ly/AirRegulatorTemplate Next Video: Match “Boxer” Primers: Coming Soon! Previous Video: How To Make The "Styro-Slicer": http://bit.ly/MakeTheStyroSlicer Subscribe for new videos every 5 days! http://bit.ly/TKoRSubscribe Join my email list! http://bit.ly/TKOREmailList For other project videos, check out http://www.thekingofrandom.com Styrofoam Casting: http://bit.ly/StyrofoamCasting Social Media Links: Google+: http://bit.ly/plusgrant Facebook: http://bit.ly/FBTheKingOfRandom Instagram: http://bit.ly/instagrant Twitter: http://bit.ly/tweetgrant Pinterest: http://bit.ly/pingrant Tumblr: http://bit.ly/grantstumblr Endcard Links: Mini Metal Foundry: http://bit.ly/MiniMetalFoundry Cap Darts: http://bit.ly/ExplodingCapDarts Brass Knuckles: http://bit.ly/BulletBrassKnuckles Kool-Eggs: http://bit.ly/KoolEggs Music By: TheFatRat - Licensed by Tasty Song Title: Windfall Music Video: https://www.youtube.com/watch?v=Bamvg4Icmi0 Label Channel: http://youtube.com/tasty Project Inspired By: Two different friends that let me study the propane torches they made from designs found on the internet. After experimenting independently, I developed the two designs into this hybrid. WARNING: Propane torches are not toys, and must be treated with caution and respect. Flames can reach temperatures upwards of 2,000ºC, which is well above the melting point of hobbyists. Working with power tools poses risks of personal injury. This project should only be attempted with adequate knowledge and training, and under constant adult supervision. Have fun, but always think ahead, and remember that any project you try is at YOUR OWN RISK. Project History & More Info: A year after I made my charcoal foundry (http://bit.ly/PopCanMelting), a friend named Chris came by to visit, and to show me a foundry he'd made out of a propane tank, and refractory cement. His was more expensive to construct, but was made to last longer, and he powered it with propane instead of charcoal. He said the burner plans he followed were the common "Ron Reil" design, which for some reason I had never heard of. He hadn't tested his foundry yet, so I got one of my brass ingots and a crucible, and we fired it up. I was amazed that in just over 2 minutes, we'd completely melted the brass ingot, and there was no charcoal dust flying around, no mess inside the foundry, and we didn't have to stop and keep adding more fuel every 5 minutes. This rekindled my interest for backyard metalworking, and I decided right there that I needed to have a propane conversion, and a new foundry. I bought the plumbing parts from Home Depot with intentions to build the torch, but they just sat on my worktable for months as I worked on developing other projects first. After a considerable amount of time, a young man named Shadrick came to my house with a group of other boys who were interested in seeing some of my projects. Shad noticed the plumbing parts on my table and asked if I was making a propane burner, and I said I intended to but hadn't got around to it. To my surprise, he let me know he'd made a propane foundry himeself and had been using it to forge steel, melt aluminum, and make knives for over a year. Shad was good enough to let me spend a couple hours at his house seeing his foundry in operation, then let me borrow his burner assembly to study it in my shop. I noticed his assembly was completely different from the one Chris had, and since I really didn't have much idea of how propane burners worked at all, I was interested in reverse engineering the science behind it. In experimenting, I realized that the purpose of the burner was to mix certain amounts of fuel and air to achieve the hottest temperature possible, and the cleanest burn. I played with different lengths of tubing, and stumbled on the realization that by controlling the air-flow through the intake port, I could adjust the flame completely, and use any length of pipe I wanted. I also noticed that without a nozzle on the end, the burner wouldn't work. I quickly developed some prototypes for an air regulator design I made from the lid of a tuna can, and it worked perfectly! My final design was a hybrid of the two systems, with most of the plumbing parts based around the Ron Reil assembly, and the rest based on the connections I saw on Shad's system. I was going to build a new foundry, designed to last longer than sand and plaster, but when I realized the propane torch worked just fine in the mini metal foundry I made before, I decided there was no need. And considering so many people have already made the plaster foundry, this simple propane burner gives the option of switching the foundry between propane, or charcoal, with no modifications required.

wn.com/The Gas Blaster Propane Torch

How to make a small foundry

Order: Reorder
Duration: 13:23
Updated: 11 Mar 2014
views: 422629

Here I use a stainless steel stock pot to make a metal melting furnace (foundry) to melt aluminum and brass.

wn.com/How To Make A Small Foundry

FIRE-KEG Foundry Furnace | Removing Forms and Curing the Refractory (Part 4)

Order: Reorder
Duration: 10:21
Updated: 11 Jul 2015
views: 44150

This video documents removing the forms and curing the refractory The curing schedule calls for a very slow first firing. This allows for all of the entrapped water to find its way out. I plan to use the CNC and the aluminum foundry as a great 1-2 punch for making cool stuff!

wn.com/Fire Keg Foundry Furnace | Removing Forms And Curing The Refractory (Part 4)

How to Build an Aluminum Foundry!

Order: Reorder
Duration: 10:00
Updated: 28 Jul 2015
views: 44011

Watch for instructions to build a foundry for melting aluminum. Melt cans using charcoal and a hair dryer! Melt aluminum cans and scrap into ingots! Light weight! History: My original forge I made was concrete and coarse perlite and had a stainless steel liner (pot) but after a few melts the liner warped so mush the forge started to crack apart. This new lightweight forge works much better and can be moved easily. The forge and cover weight about 18 pounds. I used a hair dryer with high and low airflow, only use low setting because the forge will melt your crucible. Soda cans and beer cans melt quickly but give you lots of dross. I pour the molten aluminum thru the dross and then knock the dross out onto the ground after it has cooled a little. The ingots melt and give very little dross which makes doing projects much easier. I have been making anthill castings which are pretty cool. I have used this forge about 10 times and it still looks new, although slightly discolored. Materials: 6 gallon steel bucket, 1 1/2 in dia. iron pipe 6 inches long, 1 1/2 in PVC slip to thread adapter, 1 1/2 PVC pipe 8-10 inches long, 10 quart plastic paint bucket, 5 gallon plastic bucket, coarse perlite, 15 lbs plaster of paris, hair dryer, two 2 inch u-bolts, 2 inch hole saw, 3-4 inch hole saw, duct tape, charcoal, crucible (mine is 4 inch iron pipe with end cap) and lots of cans. Inspired by... Grant Thompson - "The King of Random" How To Make The Mini Metal Foundry http://youtu.be/hHD10DjxM1g Melting Cans With The Mini Metal Foundry http://youtu.be/lSoWxG30rb0 ... and others.

wn.com/How To Build An Aluminum Foundry

FIRE-KEG Foundry Furnace | Prepping the Keg (Part 1)

Order: Reorder
Duration: 7:04
Updated: 16 Jun 2015
views: 31361

Where rock and roll meets country... This video documents prepping the keg before casting the refractory. It includes cutting the keg, adding fasteners to help hold the refractory as well as inner rings around the rim to add strength as well as a mechanical hold for the cast. I plan to use the CNC and the aluminum foundry as a great 1-2 punch for making cool stuff! and yes, plans and a detailed BOM are also in the works! :) Music is Whistling Down the Road by a 'Silent Partner' from the YouTube Library

wn.com/Fire Keg Foundry Furnace | Prepping The Keg (Part 1)

Backyard foundry making copper ingots

Order: Reorder
Duration: 12:08
Updated: 23 Jan 2014
views: 87860

Backyard foundry making copper ingots

wn.com/Backyard Foundry Making Copper Ingots

How to Melt Copper 2/3: Building the Foundry

Order: Reorder
Duration: 36:39
Updated: 30 May 2014
views: 419869

Here is how I built my metal-melting foundry. It is composed of: -150 kg of concrete - 60 kg of mortar - 25 kg of refractory cement - 56 bricks - 1 steel adapter The lid will be composed of: - 30 kg of concrete - 5 kg of refractory cement - 60 cm of Rebar - 1600 cm² of expanded steel lath In hindsight, I recommend beginning to cure your refractory cement immediately after applying it. First by using lots of forced air, and then slowly heating it up to it's curing temperature. Then slowly cooling it down again. Thank you for watching. =)

wn.com/How To Melt Copper 2 3 Building The Foundry

Melting Aluminium with my New Mini Metal Foundry

Order: Reorder
Duration: 10:08
Updated: 02 Jun 2015
views: 9838

Because I had problems with the furnace last time I decided to build a new furnace. This is the first time I use it. There will be coming more video's about aluminium casting for sure! If you like my videos, please Subscribe! Please feel free to leave a message, send me a personal message or contact me at triangle(dot)stirling(at)gmail(dot)com. Your suggestions/feedback/tips/tricks etc. are greatly appreciated!

wn.com/Melting Aluminium With My New Mini Metal Foundry

FIRE-KEG Foundry Furnace | Casting the Base and Lid (Part 2)

Order: Reorder
Duration: 8:20
Updated: 16 Jun 2015
views: 33342

Where rock and roll meets country... This video documents casting the base and lid. It includes making the form work, mixing the refractory, curing process and making the form to cast the inner chamber. I plan to use the CNC and the aluminum foundry as a great 1-2 punch for making cool stuff! and yes, plans and a detailed BOM are also in the works! :) Music is Whistling Down the Road by a 'Silent Partner' from the YouTube Library

wn.com/Fire Keg Foundry Furnace | Casting The Base And Lid (Part 2)

Sunset Foundry visit (Cast Iron pour)

Order: Reorder
Duration: 7:16
Updated: 31 Dec 2013
views: 104711

EDIT: Please no off topic comments. No trolls. No grammar/spelling nazis. No "You should have left the titles up longer", or "the sound was too loud for my sensitive eardrums". Your comments will be deleted and you may be banned. I'm tired of it. I don't put this stuff up for free just to take a bunch of crap from people that don't post anything themselves... Learn how to use a volume control or a pause button. I am not going to re-render and re-upload just for you. I didn't want the titles interfering with the video itself and I guarantee that it was louder in person than your PC speakers rendered it... E-mail or message me if you have technical comments or suggestions. IF YOU get the feeling that you want to click the "I dislike this" button, please grow a pair and have the courage to tell me why, even if it's one of the reasons listed above. Now back to your scheduled program. :-) I visited Sunset Foundry, a small, family-run iron foundry in the western Sierra foothills for one of their iron pours back in September 2012. I'm posting this as inspiration to both myself and other KSW members as we prepare to be able to melt cast iron ourselves...

wn.com/Sunset Foundry Visit (Cast Iron Pour)

Fun with a Mini Metal Foundry

Order: Reorder
Duration: 16:38
Updated: 03 Jan 2016
views: 749

Just messing around with a mini metal foundry and trying to do some casting. Enjoy! How to make a mini metal foundry: https://www.youtube.com/watch?v=hHD10DjxM1g

wn.com/Fun With A Mini Metal Foundry

Pouring Molten Brass: Backyard Molding and Foundry Work

Order: Reorder
Duration: 57:16
Updated: 31 Aug 2014
views: 180608

Finally got a chance to do some foundry work and test out the 3D printed patterns. In this video, I will give you the basics of casting metal with a "backyard" foundry setup including the molding process and the pouring.

wn.com/Pouring Molten Brass Backyard Molding And Foundry Work

Small Waste Oil Foundry

Order: Reorder
Duration: 8:44
Updated: 12 Apr 2013
views: 19050

This is a small waste oil furnace I made for melting metal. It is the first time I have run it. It worked surprizingly well and got extremely hot, and it seemed to be pretty fuel efficient. I thought the metal was aluminum, but by the lower melting point I noticed, and by the fact that cutting and drilling it was tough like steel, I think the metal was a hard zinc-aluminum alloy. Check out my website!: http://www.ourbadscience.com/ Music: "Long Time Coming" and "Trips It," Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 http://creativecommons.org/licenses/by/3.0/

wn.com/Small Waste Oil Foundry

Backyard Foundry Tutorial Pt 1

Order: Reorder
Duration: 15:57
Updated: 07 Jul 2012
views: 112116

This is part one of a much requested three part tutorial that shows the viewer how to safely cut and fabricate a small foundry from a discarded propane tank. The tools and material are what is commonly available at any hardware store, building supply or can be easily found on the internet if not locally available. This first part covers how to cut and fabricate the foundry base and the lid with detailed measurements and techniques. Part 2 is at: http://youtu.be/DHsVond11fA

wn.com/Backyard Foundry Tutorial Pt 1

HOMEMADE FOUNDRY FURNACE !!! For Under $200 dollars. ask Jeff Williams

Order: Reorder
Duration: 6:43
Updated: 14 Oct 2014
views: 33600

Build your own Foundry Furnace for melting and Smelting.Quick step by step instructions on a top notch furnace that will easily reach temperatures of 2500 degrees. Perfect for melting Aluminum, Copper, Silver and of course GOLD ! If you can weld then this will be your an easy project for you. For more please visit us at ; http://www.askjeffwilliams.com/ For Burner Designs ; https://www.abana.org/ronreil/design1.shtml For Heatstop 50 ; http://www.heatstoprefractorymortar.com/productDetail.php?HEAT-STOP-II-HEAT-STOP-50-1 For Rutland Refractory Cement; http://www.acehardware.com/product/index.jsp?productId=1275992

wn.com/Homemade Foundry Furnace For Under 200 Dollars. Ask Jeff Williams

The Official Lodge Cast Iron Foundry Tour - Extended Version

Order: Reorder
Duration: 11:24
Updated: 29 Apr 2015
views: 24072

Go behind the scenes with Lodge Cast Iron to see exactly how we make cast iron cookware in South Pittsburg, Tennessee. Lodge is America's oldest cast iron cookware foundry, family-owned since 1896. You can take a free tour of the Lodge foundry during the National Cornbread Festival, which is held during the last full weekend of April in South Pittsburg each year. For more info, visit: www.nationalcornbread.com.

wn.com/The Official Lodge Cast Iron Foundry Tour Extended Version