- published: 25 Aug 2011
- views: 28022
Create your page here
Wednesday, 01 June 2016
-
remove the playlistTool Steel
- remove the playlistTool Steel
back to playlist
Uddeholm - Swedish quality tool steel and support where ever you are
Since 1668, Uddeholm has been associated with knowledge, innovative spirit and the special quality of Swedish steel. During the centuries, we have attained many valuable experiences. This has allowed us to be one step ahead of the competition. Today Uddeholm have 4000 employees all over the world.
Come along on my first time hardening and annealing a plane blade. I'm using some O1 blank moulding plane irons from Lie-Nielsen. Using a propane torch and a homemade kiln of Fyre Bricks bought from the local pottery store I ended up with the perfect solution for a little plow plane.
- published: 16 Sep 2011
- views: 92735
Tool steel refers to a variety of carbon and alloy steels that are particularly well-suited to be made into tools. Their suitability comes from their distinctive hardness, resistance to abrasion, their ability to hold a cutting edge, and/or their resistance to deformation at elevated temperatures (red-hardness). Tool steel is generally used in a heat-treated state. Many high carbon tool steels are also more resistant to corrosion due to their higher ratios of elements such as vanadium and niobium.
With a carbon content between 0.7% and 1.5%, tool steels are manufactured under carefully controlled conditions to produce the required quality. The manganese content is often kept low to minimize the possibility of cracking during water quenching. However, proper heat treating of these steels is important for adequate performance, and there are many suppliers who provide tooling blanks intended for oil quenching.
This video is targeted to blind users.
Attribution:
Article text available under CC-BY-SA
Creative Commons image source in video
- published: 17 Oct 2014
- views: 698
Tool SteelCarbon tool steel contains 0.7% of carbon and more. When entirely finished, this material is known for its hardness and strength. It is used in manufacturing tools. The carbon tool steel is valued for its low cost and relative hardness as opposed to the other tool materials. Depending on its chemical properties there exist carbon; alloy and high-speed steel.Carbon tool steel is used to manufacture jointer's and bench tools operated under easy cutting conditions. It comes in handy in welding structures on the tools operated under the conditions that do not cause heating of the cutting edge. The main drawback of this steel is insufficient heat resistance. Alloy tool steel is used to make cutting tools (drills, milling cutters, tap-screws, tapping dies), and die tools which are more important. The letters and figures used in indicating the brand mean the following: figure -average carbon content in tenths of percent, X - chromium alloy, V - tungsten alloy, G - manganese alloy. The content of chromium, tungsten and manganese in such steel is set by GOST (state standard). High-speed steel is again for the most part used to make cutting tools. This kind of steel has high thermal resistance, is hard and durable. Besides, high-speed steel has increased resistance to plastic deformation. A cutting tool is operated under the conditions of extended contact and friction with the metal being treated. The configurations and properties of the cutting edge should remain unchanged in the process of operation. The material used in manufacturing cutting tools should be hard and durable - that is cable of retaining the cutting properties of the edge under friction.A reliable tool is first of all the high-quality material used by its manufacturer working in the field of commercial tool steel rolling.
- published: 30 Nov 2010
- views: 2129
I always felt like making your own tooling was a great sense of accomplishment. I had a problem with poor surface finish from an Asian/import carbide-brazed boring bar on a prior project which is why I wanted to make a boring bar from scratch! Should be a fun project involving a lot of shop skills: CAD, making a drawing, turning, machining, heat treating and grinding!
More info at nyccnc.com and facebook.com/nyccnc
- published: 27 Oct 2013
- views: 20542
I always felt like making your own tooling was a great sense of accomplishment. I had a problem with poor surface finish from an Asian/import carbide-brazed boring bar on a prior project which is why I wanted to make a boring bar from scratch! Should be a fun project involving a lot of shop skills: CAD, making a drawing, turning, machining, heat treating and grinding!
More info at nyccnc.com and facebook.com/nyccnc
- published: 29 Oct 2013
- views: 8698
Stress test on a knife I made in O1 Tool Steel. Heat Treated in house.
@themak5 https://instagram.com/themak5/
If you Like it, Click Like!
If your friends would like it, Click Share!
if You want to see more, Subscribe!
- published: 22 Mar 2015
- views: 10654
Full review: http://www.sword-buyers-guide.com/custom-made-swords.html
Heavy Destructive Testing of a Differentially Hardened T-10 Tool Katana (solid bodied blade).
These are SBG exclusive swords made to order with a large variety of custom configurations so you can create your own unique sword, based around a high quality differentially hardened T-10 tool steel blade with natural hamon.
Price is US$299.99 shipped FREE in the USA and Canada.
Click on the link below for the full comprehensive review:
http://www.sword-buyers-guide.com/cus...
Thanks,
Paul Southren
www.sword-buyers-guide.com
P.S. DO NOT attempt these tests at home. Destructive testing of swords is extremely dangerous.
Music by Kevin MacLeod
- published: 30 Aug 2008
- views: 473597
Tool steel refers to a variety of carbon and alloy steels that are particularly well-suited to be made into tools. Their suitability comes from their distinctive hardness, resistance to abrasion, their ability to hold a cutting edge, and/or their resistance to deformation at elevated temperatures (red-hardness). Tool steel is generally used in a heat-treated state.
With a carbon content between 0.7% and 1.5%, tool steels are manufactured under carefully controlled conditions to produce the required quality. The manganese content is often kept low to minimize the possibility of cracking during water quenching. However, proper heat treating of these steels is important for adequate performance, and there are many suppliers who provide tooling blanks intended for oil quenching.
Tool steels are made to a number of grades for different applications. Choice of grade depends on, among other things, whether a keen cutting edge is necessary, as in stamping dies, or whether the tool has to withstand impact loading and service conditions encountered with such hand tools as axes, pickaxes, and quarrying implements. In general, the edge temperature under expected use is an important determinant of both composition and required heat treatment. The higher carbon grades are typically used for such applications as stamping dies, metal cutting tools, etc.
This page contains text from Wikipedia, the Free Encyclopedia -
http://en.wikipedia.org/wiki/Tool_steel
This article is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License, which means that you can copy and modify it as long as the entire work (including additions) remains under this license.
This article is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License, which means that you can copy and modify it as long as the entire work (including additions) remains under this license.
- Loading...
-
8:42Uddeholm - Tool Steel of World Class
Uddeholm - Tool Steel of World ClassUddeholm - Tool Steel of World Class
Uddeholm - Swedish quality tool steel and support where ever you are Since 1668, Uddeholm has been associated with knowledge, innovative spirit and the special quality of Swedish steel. During the centuries, we have attained many valuable experiences. This has allowed us to be one step ahead of the competition. Today Uddeholm have 4000 employees all over the world. -
10:06How to turn tool steel in a lathe
How to turn tool steel in a lathe -
14:05Heat Treating 01 Tool Steel Plane Blank Irons at Home
Heat Treating 01 Tool Steel Plane Blank Irons at HomeHeat Treating 01 Tool Steel Plane Blank Irons at Home
Come along on my first time hardening and annealing a plane blade. I'm using some O1 blank moulding plane irons from Lie-Nielsen. Using a propane torch and a homemade kiln of Fyre Bricks bought from the local pottery store I ended up with the perfect solution for a little plow plane. -
10:10Tool steel
Tool steelTool steel
Tool steel refers to a variety of carbon and alloy steels that are particularly well-suited to be made into tools. Their suitability comes from their distinctive hardness, resistance to abrasion, their ability to hold a cutting edge, and/or their resistance to deformation at elevated temperatures (red-hardness). Tool steel is generally used in a heat-treated state. Many high carbon tool steels are also more resistant to corrosion due to their higher ratios of elements such as vanadium and niobium. With a carbon content between 0.7% and 1.5%, tool steels are manufactured under carefully controlled conditions to produce the required quality. The manganese content is often kept low to minimize the possibility of cracking during water quenching. However, proper heat treating of these steels is important for adequate performance, and there are many suppliers who provide tooling blanks intended for oil quenching. This video is targeted to blind users. Attribution: Article text available under CC-BY-SA Creative Commons image source in video -
2:58Tool Steel
Tool SteelTool Steel
Tool SteelCarbon tool steel contains 0.7% of carbon and more. When entirely finished, this material is known for its hardness and strength. It is used in manufacturing tools. The carbon tool steel is valued for its low cost and relative hardness as opposed to the other tool materials. Depending on its chemical properties there exist carbon; alloy and high-speed steel.Carbon tool steel is used to manufacture jointer's and bench tools operated under easy cutting conditions. It comes in handy in welding structures on the tools operated under the conditions that do not cause heating of the cutting edge. The main drawback of this steel is insufficient heat resistance. Alloy tool steel is used to make cutting tools (drills, milling cutters, tap-screws, tapping dies), and die tools which are more important. The letters and figures used in indicating the brand mean the following: figure -average carbon content in tenths of percent, X - chromium alloy, V - tungsten alloy, G - manganese alloy. The content of chromium, tungsten and manganese in such steel is set by GOST (state standard). High-speed steel is again for the most part used to make cutting tools. This kind of steel has high thermal resistance, is hard and durable. Besides, high-speed steel has increased resistance to plastic deformation. A cutting tool is operated under the conditions of extended contact and friction with the metal being treated. The configurations and properties of the cutting edge should remain unchanged in the process of operation. The material used in manufacturing cutting tools should be hard and durable - that is cable of retaining the cutting properties of the edge under friction.A reliable tool is first of all the high-quality material used by its manufacturer working in the field of commercial tool steel rolling. -
28:06Turning & Machining a Boring Bar out of O1 Tool Steel! Part 1
Turning & Machining a Boring Bar out of O1 Tool Steel! Part 1Turning & Machining a Boring Bar out of O1 Tool Steel! Part 1
I always felt like making your own tooling was a great sense of accomplishment. I had a problem with poor surface finish from an Asian/import carbide-brazed boring bar on a prior project which is why I wanted to make a boring bar from scratch! Should be a fun project involving a lot of shop skills: CAD, making a drawing, turning, machining, heat treating and grinding! More info at nyccnc.com and facebook.com/nyccnc -
16:10Turning & Machining a Boring Bar out of O1 Tool Steel! Part 2
Turning & Machining a Boring Bar out of O1 Tool Steel! Part 2Turning & Machining a Boring Bar out of O1 Tool Steel! Part 2
I always felt like making your own tooling was a great sense of accomplishment. I had a problem with poor surface finish from an Asian/import carbide-brazed boring bar on a prior project which is why I wanted to make a boring bar from scratch! Should be a fun project involving a lot of shop skills: CAD, making a drawing, turning, machining, heat treating and grinding! More info at nyccnc.com and facebook.com/nyccnc -
4:05Mak - Knife Test in O1 Tool Steel
Mak - Knife Test in O1 Tool SteelMak - Knife Test in O1 Tool Steel
Stress test on a knife I made in O1 Tool Steel. Heat Treated in house. @themak5 https://instagram.com/themak5/ If you Like it, Click Like! If your friends would like it, Click Share! if You want to see more, Subscribe! -
2:02T-10 Tool Steel Katana - Destructive Testing
T-10 Tool Steel Katana - Destructive TestingT-10 Tool Steel Katana - Destructive Testing
Full review: http://www.sword-buyers-guide.com/custom-made-swords.html Heavy Destructive Testing of a Differentially Hardened T-10 Tool Katana (solid bodied blade). These are SBG exclusive swords made to order with a large variety of custom configurations so you can create your own unique sword, based around a high quality differentially hardened T-10 tool steel blade with natural hamon. Price is US$299.99 shipped FREE in the USA and Canada. Click on the link below for the full comprehensive review: http://www.sword-buyers-guide.com/cus... Thanks, Paul Southren www.sword-buyers-guide.com P.S. DO NOT attempt these tests at home. Destructive testing of swords is extremely dangerous. Music by Kevin MacLeod -
4:22How to harden tool steel
How to harden tool steelHow to harden tool steel
- Alloy
- Alloy steel
- Austenite
- Axe
- Bainite
- Beta ferrite
- British Standards
- Carbon
- Carbon steel
- Cast iron
- Cementite
- Chromium
- Crucible steel
- Die (manufacturing)
- Die casting
- Ductile iron
- Ferrite (iron)
- Forging
- Graphite
- Gray iron
- Hardenability
- Hardness
- Heat treatment
- Heat-treated
- Hexaferrum
- High speed steel
- Industrial Press
- Injection molding
- Iron
- Jackhammer
- Ledeburite
- Machinery's Handbook
- Malleable iron
- Manganese
- Maraging steel
- Martensite
- Microstructure
- Molybdenum
- Mushet steel
- Nickel
- Pearlite
- Phosphorus
- Pickaxe
- Plain-carbon steel
- Quarry
- Quenching
- Rockwell scale
- Silicon
- Silver steel
- Solid solution
- Spheroidite
- Spring steel
- Stainless steel
- Steel
- Structural load
- Sulfur
- Template Steels
- Template talk Steels
- Tool
- Tool steel
- Tungsten
- Vanadium
- Wear
- Weathering steel
- White iron
- Wrought iron
-
Uddeholm - Tool Steel of World Class
Uddeholm - Swedish quality tool steel and support where ever you are Since 1668, Uddeholm has been associated with knowledge, innovative spirit and the special quality of Swedish steel. During the centuries, we have attained many valuable experiences. This has allowed us to be one step ahead of the competition. Today Uddeholm have 4000 employees all over the world. -
-
Heat Treating 01 Tool Steel Plane Blank Irons at Home
Come along on my first time hardening and annealing a plane blade. I'm using some O1 blank moulding plane irons from Lie-Nielsen. Using a propane torch and a homemade kiln of Fyre Bricks bought from the local pottery store I ended up with the perfect solution for a little plow plane. -
Tool steel
Tool steel refers to a variety of carbon and alloy steels that are particularly well-suited to be made into tools. Their suitability comes from their distinctive hardness, resistance to abrasion, their ability to hold a cutting edge, and/or their resistance to deformation at elevated temperatures (red-hardness). Tool steel is generally used in a heat-treated state. Many high carbon tool steels are also more resistant to corrosion due to their higher ratios of elements such as vanadium and niobium. With a carbon content between 0.7% and 1.5%, tool steels are manufactured under carefully controlled conditions to produce the required quality. The manganese content is often kept low to minimize the possibility of cracking during water quenching. However, proper heat treating of these steels is... -
Tool Steel
Tool SteelCarbon tool steel contains 0.7% of carbon and more. When entirely finished, this material is known for its hardness and strength. It is used in manufacturing tools. The carbon tool steel is valued for its low cost and relative hardness as opposed to the other tool materials. Depending on its chemical properties there exist carbon; alloy and high-speed steel.Carbon tool steel is used to manufacture jointer's and bench tools operated under easy cutting conditions. It comes in handy in welding structures on the tools operated under the conditions that do not cause heating of the cutting edge. The main drawback of this steel is insufficient heat resistance. Alloy tool steel is used to make cutting tools (drills, milling cutters, tap-screws, tapping dies), and die tools which are more... -
Turning & Machining a Boring Bar out of O1 Tool Steel! Part 1
I always felt like making your own tooling was a great sense of accomplishment. I had a problem with poor surface finish from an Asian/import carbide-brazed boring bar on a prior project which is why I wanted to make a boring bar from scratch! Should be a fun project involving a lot of shop skills: CAD, making a drawing, turning, machining, heat treating and grinding! More info at nyccnc.com and facebook.com/nyccnc -
Turning & Machining a Boring Bar out of O1 Tool Steel! Part 2
I always felt like making your own tooling was a great sense of accomplishment. I had a problem with poor surface finish from an Asian/import carbide-brazed boring bar on a prior project which is why I wanted to make a boring bar from scratch! Should be a fun project involving a lot of shop skills: CAD, making a drawing, turning, machining, heat treating and grinding! More info at nyccnc.com and facebook.com/nyccnc -
Mak - Knife Test in O1 Tool Steel
Stress test on a knife I made in O1 Tool Steel. Heat Treated in house. @themak5 https://instagram.com/themak5/ If you Like it, Click Like! If your friends would like it, Click Share! if You want to see more, Subscribe! -
T-10 Tool Steel Katana - Destructive Testing
Full review: http://www.sword-buyers-guide.com/custom-made-swords.html Heavy Destructive Testing of a Differentially Hardened T-10 Tool Katana (solid bodied blade). These are SBG exclusive swords made to order with a large variety of custom configurations so you can create your own unique sword, based around a high quality differentially hardened T-10 tool steel blade with natural hamon. Price is US$299.99 shipped FREE in the USA and Canada. Click on the link below for the full comprehensive review: http://www.sword-buyers-guide.com/cus... Thanks, Paul Southren www.sword-buyers-guide.com P.S. DO NOT attempt these tests at home. Destructive testing of swords is extremely dangerous. Music by Kevin MacLeod -
How to harden tool steel
Uddeholm - Tool Steel of World Class
- Order: Reorder
- Duration: 8:42
- Updated: 25 Aug 2011
- views: 28022
Uddeholm - Swedish quality tool steel and support where ever you are
Since 1668, Uddeholm has been associated with knowledge, innovative spirit and the special...
Uddeholm - Swedish quality tool steel and support where ever you are
Since 1668, Uddeholm has been associated with knowledge, innovative spirit and the special quality of Swedish steel. During the centuries, we have attained many valuable experiences. This has allowed us to be one step ahead of the competition. Today Uddeholm have 4000 employees all over the world.
wn.com/Uddeholm Tool Steel Of World Class
Uddeholm - Swedish quality tool steel and support where ever you are
Since 1668, Uddeholm has been associated with knowledge, innovative spirit and the special quality of Swedish steel. During the centuries, we have attained many valuable experiences. This has allowed us to be one step ahead of the competition. Today Uddeholm have 4000 employees all over the world.
- published: 25 Aug 2011
- views: 28022
How to turn tool steel in a lathe
- Order: Reorder
- Duration: 10:06
- Updated: 09 Mar 2014
- views: 378401
We take a big mistake at work and turn it into the next midnight infomercial workout machine. Making BIG punches and dies with scrap tool steel. Using the 100 t...
We take a big mistake at work and turn it into the next midnight infomercial workout machine. Making BIG punches and dies with scrap tool steel. Using the 100 ton Armstrong powered press to punch holes in plate.
wn.com/How To Turn Tool Steel In A Lathe
Heat Treating 01 Tool Steel Plane Blank Irons at Home
- Order: Reorder
- Duration: 14:05
- Updated: 16 Sep 2011
- views: 92735
Come along on my first time hardening and annealing a plane blade. I'm using some O1 blank moulding plane irons from Lie-Nielsen. Using a propane torch and a ho...
Come along on my first time hardening and annealing a plane blade. I'm using some O1 blank moulding plane irons from Lie-Nielsen. Using a propane torch and a homemade kiln of Fyre Bricks bought from the local pottery store I ended up with the perfect solution for a little plow plane.
wn.com/Heat Treating 01 Tool Steel Plane Blank Irons At Home
Come along on my first time hardening and annealing a plane blade. I'm using some O1 blank moulding plane irons from Lie-Nielsen. Using a propane torch and a homemade kiln of Fyre Bricks bought from the local pottery store I ended up with the perfect solution for a little plow plane.
- published: 16 Sep 2011
- views: 92735
Tool steel
- Order: Reorder
- Duration: 10:10
- Updated: 17 Oct 2014
- views: 698
Tool steel refers to a variety of carbon and alloy steels that are particularly well-suited to be made into tools. Their suitability comes from their distinctiv...
Tool steel refers to a variety of carbon and alloy steels that are particularly well-suited to be made into tools. Their suitability comes from their distinctive hardness, resistance to abrasion, their ability to hold a cutting edge, and/or their resistance to deformation at elevated temperatures (red-hardness). Tool steel is generally used in a heat-treated state. Many high carbon tool steels are also more resistant to corrosion due to their higher ratios of elements such as vanadium and niobium.
With a carbon content between 0.7% and 1.5%, tool steels are manufactured under carefully controlled conditions to produce the required quality. The manganese content is often kept low to minimize the possibility of cracking during water quenching. However, proper heat treating of these steels is important for adequate performance, and there are many suppliers who provide tooling blanks intended for oil quenching.
This video is targeted to blind users.
Attribution:
Article text available under CC-BY-SA
Creative Commons image source in video
wn.com/Tool Steel
Tool steel refers to a variety of carbon and alloy steels that are particularly well-suited to be made into tools. Their suitability comes from their distinctive hardness, resistance to abrasion, their ability to hold a cutting edge, and/or their resistance to deformation at elevated temperatures (red-hardness). Tool steel is generally used in a heat-treated state. Many high carbon tool steels are also more resistant to corrosion due to their higher ratios of elements such as vanadium and niobium.
With a carbon content between 0.7% and 1.5%, tool steels are manufactured under carefully controlled conditions to produce the required quality. The manganese content is often kept low to minimize the possibility of cracking during water quenching. However, proper heat treating of these steels is important for adequate performance, and there are many suppliers who provide tooling blanks intended for oil quenching.
This video is targeted to blind users.
Attribution:
Article text available under CC-BY-SA
Creative Commons image source in video
- published: 17 Oct 2014
- views: 698
Tool Steel
- Order: Reorder
- Duration: 2:58
- Updated: 30 Nov 2010
- views: 2129
Tool SteelCarbon tool steel contains 0.7% of carbon and more. When entirely finished, this material is known for its hardness and strength. It is used in manufa...
Tool SteelCarbon tool steel contains 0.7% of carbon and more. When entirely finished, this material is known for its hardness and strength. It is used in manufacturing tools. The carbon tool steel is valued for its low cost and relative hardness as opposed to the other tool materials. Depending on its chemical properties there exist carbon; alloy and high-speed steel.Carbon tool steel is used to manufacture jointer's and bench tools operated under easy cutting conditions. It comes in handy in welding structures on the tools operated under the conditions that do not cause heating of the cutting edge. The main drawback of this steel is insufficient heat resistance. Alloy tool steel is used to make cutting tools (drills, milling cutters, tap-screws, tapping dies), and die tools which are more important. The letters and figures used in indicating the brand mean the following: figure -average carbon content in tenths of percent, X - chromium alloy, V - tungsten alloy, G - manganese alloy. The content of chromium, tungsten and manganese in such steel is set by GOST (state standard). High-speed steel is again for the most part used to make cutting tools. This kind of steel has high thermal resistance, is hard and durable. Besides, high-speed steel has increased resistance to plastic deformation. A cutting tool is operated under the conditions of extended contact and friction with the metal being treated. The configurations and properties of the cutting edge should remain unchanged in the process of operation. The material used in manufacturing cutting tools should be hard and durable - that is cable of retaining the cutting properties of the edge under friction.A reliable tool is first of all the high-quality material used by its manufacturer working in the field of commercial tool steel rolling.
wn.com/Tool Steel
Tool SteelCarbon tool steel contains 0.7% of carbon and more. When entirely finished, this material is known for its hardness and strength. It is used in manufacturing tools. The carbon tool steel is valued for its low cost and relative hardness as opposed to the other tool materials. Depending on its chemical properties there exist carbon; alloy and high-speed steel.Carbon tool steel is used to manufacture jointer's and bench tools operated under easy cutting conditions. It comes in handy in welding structures on the tools operated under the conditions that do not cause heating of the cutting edge. The main drawback of this steel is insufficient heat resistance. Alloy tool steel is used to make cutting tools (drills, milling cutters, tap-screws, tapping dies), and die tools which are more important. The letters and figures used in indicating the brand mean the following: figure -average carbon content in tenths of percent, X - chromium alloy, V - tungsten alloy, G - manganese alloy. The content of chromium, tungsten and manganese in such steel is set by GOST (state standard). High-speed steel is again for the most part used to make cutting tools. This kind of steel has high thermal resistance, is hard and durable. Besides, high-speed steel has increased resistance to plastic deformation. A cutting tool is operated under the conditions of extended contact and friction with the metal being treated. The configurations and properties of the cutting edge should remain unchanged in the process of operation. The material used in manufacturing cutting tools should be hard and durable - that is cable of retaining the cutting properties of the edge under friction.A reliable tool is first of all the high-quality material used by its manufacturer working in the field of commercial tool steel rolling.
- published: 30 Nov 2010
- views: 2129
Turning & Machining a Boring Bar out of O1 Tool Steel! Part 1
- Order: Reorder
- Duration: 28:06
- Updated: 27 Oct 2013
- views: 20542
I always felt like making your own tooling was a great sense of accomplishment. I had a problem with poor surface finish from an Asian/import carbide-brazed bo...
I always felt like making your own tooling was a great sense of accomplishment. I had a problem with poor surface finish from an Asian/import carbide-brazed boring bar on a prior project which is why I wanted to make a boring bar from scratch! Should be a fun project involving a lot of shop skills: CAD, making a drawing, turning, machining, heat treating and grinding!
More info at nyccnc.com and facebook.com/nyccnc
wn.com/Turning Machining A Boring Bar Out Of O1 Tool Steel Part 1
I always felt like making your own tooling was a great sense of accomplishment. I had a problem with poor surface finish from an Asian/import carbide-brazed boring bar on a prior project which is why I wanted to make a boring bar from scratch! Should be a fun project involving a lot of shop skills: CAD, making a drawing, turning, machining, heat treating and grinding!
More info at nyccnc.com and facebook.com/nyccnc
- published: 27 Oct 2013
- views: 20542
Turning & Machining a Boring Bar out of O1 Tool Steel! Part 2
- Order: Reorder
- Duration: 16:10
- Updated: 29 Oct 2013
- views: 8698
I always felt like making your own tooling was a great sense of accomplishment. I had a problem with poor surface finish from an Asian/import carbide-brazed bo...
I always felt like making your own tooling was a great sense of accomplishment. I had a problem with poor surface finish from an Asian/import carbide-brazed boring bar on a prior project which is why I wanted to make a boring bar from scratch! Should be a fun project involving a lot of shop skills: CAD, making a drawing, turning, machining, heat treating and grinding!
More info at nyccnc.com and facebook.com/nyccnc
wn.com/Turning Machining A Boring Bar Out Of O1 Tool Steel Part 2
I always felt like making your own tooling was a great sense of accomplishment. I had a problem with poor surface finish from an Asian/import carbide-brazed boring bar on a prior project which is why I wanted to make a boring bar from scratch! Should be a fun project involving a lot of shop skills: CAD, making a drawing, turning, machining, heat treating and grinding!
More info at nyccnc.com and facebook.com/nyccnc
- published: 29 Oct 2013
- views: 8698
Mak - Knife Test in O1 Tool Steel
- Order: Reorder
- Duration: 4:05
- Updated: 22 Mar 2015
- views: 10654
Stress test on a knife I made in O1 Tool Steel. Heat Treated in house.
@themak5 https://instagram.com/themak5/
If you Like it, Click Like!
If your friends w...
Stress test on a knife I made in O1 Tool Steel. Heat Treated in house.
@themak5 https://instagram.com/themak5/
If you Like it, Click Like!
If your friends would like it, Click Share!
if You want to see more, Subscribe!
wn.com/Mak Knife Test In O1 Tool Steel
Stress test on a knife I made in O1 Tool Steel. Heat Treated in house.
@themak5 https://instagram.com/themak5/
If you Like it, Click Like!
If your friends would like it, Click Share!
if You want to see more, Subscribe!
- published: 22 Mar 2015
- views: 10654
T-10 Tool Steel Katana - Destructive Testing
- Order: Reorder
- Duration: 2:02
- Updated: 30 Aug 2008
- views: 473597
Full review: http://www.sword-buyers-guide.com/custom-made-swords.html
Heavy Destructive Testing of a Differentially Hardened T-10 Tool Katana (solid bodied ...
Full review: http://www.sword-buyers-guide.com/custom-made-swords.html
Heavy Destructive Testing of a Differentially Hardened T-10 Tool Katana (solid bodied blade).
These are SBG exclusive swords made to order with a large variety of custom configurations so you can create your own unique sword, based around a high quality differentially hardened T-10 tool steel blade with natural hamon.
Price is US$299.99 shipped FREE in the USA and Canada.
Click on the link below for the full comprehensive review:
http://www.sword-buyers-guide.com/cus...
Thanks,
Paul Southren
www.sword-buyers-guide.com
P.S. DO NOT attempt these tests at home. Destructive testing of swords is extremely dangerous.
Music by Kevin MacLeod
wn.com/T 10 Tool Steel Katana Destructive Testing
Full review: http://www.sword-buyers-guide.com/custom-made-swords.html
Heavy Destructive Testing of a Differentially Hardened T-10 Tool Katana (solid bodied blade).
These are SBG exclusive swords made to order with a large variety of custom configurations so you can create your own unique sword, based around a high quality differentially hardened T-10 tool steel blade with natural hamon.
Price is US$299.99 shipped FREE in the USA and Canada.
Click on the link below for the full comprehensive review:
http://www.sword-buyers-guide.com/cus...
Thanks,
Paul Southren
www.sword-buyers-guide.com
P.S. DO NOT attempt these tests at home. Destructive testing of swords is extremely dangerous.
Music by Kevin MacLeod
- published: 30 Aug 2008
- views: 473597
How to harden tool steel
- Order: Reorder
- Duration: 4:22
- Updated: 09 Sep 2014
- views: 758
- published: 09 Sep 2014
- views: 758
close fullscreen
- Playlist
- Chat
close fullscreen
- Playlist
- Chat
8:42
Uddeholm - Tool Steel of World Class
Uddeholm - Swedish quality tool steel and support where ever you are
Since 1668, Uddeholm...
published: 25 Aug 2011
Uddeholm - Tool Steel of World Class
Uddeholm - Tool Steel of World Class
- Report rights infringement
- published: 25 Aug 2011
- views: 28022
10:06
How to turn tool steel in a lathe
We take a big mistake at work and turn it into the next midnight infomercial workout machi...
published: 09 Mar 2014
How to turn tool steel in a lathe
How to turn tool steel in a lathe
- Report rights infringement
- published: 09 Mar 2014
- views: 378401
14:05
Heat Treating 01 Tool Steel Plane Blank Irons at Home
Come along on my first time hardening and annealing a plane blade. I'm using some O1 blank...
published: 16 Sep 2011
Heat Treating 01 Tool Steel Plane Blank Irons at Home
Heat Treating 01 Tool Steel Plane Blank Irons at Home
- Report rights infringement
- published: 16 Sep 2011
- views: 92735
10:10
Tool steel
Tool steel refers to a variety of carbon and alloy steels that are particularly well-suite...
published: 17 Oct 2014
Tool steel
Tool steel
- Report rights infringement
- published: 17 Oct 2014
- views: 698
2:58
Tool Steel
Tool SteelCarbon tool steel contains 0.7% of carbon and more. When entirely finished, this...
published: 30 Nov 2010
Tool Steel
Tool Steel
- Report rights infringement
- published: 30 Nov 2010
- views: 2129
28:06
Turning & Machining a Boring Bar out of O1 Tool Steel! Part 1
I always felt like making your own tooling was a great sense of accomplishment. I had a p...
published: 27 Oct 2013
Turning & Machining a Boring Bar out of O1 Tool Steel! Part 1
Turning & Machining a Boring Bar out of O1 Tool Steel! Part 1
- Report rights infringement
- published: 27 Oct 2013
- views: 20542
16:10
Turning & Machining a Boring Bar out of O1 Tool Steel! Part 2
I always felt like making your own tooling was a great sense of accomplishment. I had a p...
published: 29 Oct 2013
Turning & Machining a Boring Bar out of O1 Tool Steel! Part 2
Turning & Machining a Boring Bar out of O1 Tool Steel! Part 2
- Report rights infringement
- published: 29 Oct 2013
- views: 8698
4:05
Mak - Knife Test in O1 Tool Steel
Stress test on a knife I made in O1 Tool Steel. Heat Treated in house.
@themak5 https://...
published: 22 Mar 2015
Mak - Knife Test in O1 Tool Steel
Mak - Knife Test in O1 Tool Steel
- Report rights infringement
- published: 22 Mar 2015
- views: 10654
2:02
T-10 Tool Steel Katana - Destructive Testing
Full review: http://www.sword-buyers-guide.com/custom-made-swords.html
Heavy Destructiv...
published: 30 Aug 2008
T-10 Tool Steel Katana - Destructive Testing
T-10 Tool Steel Katana - Destructive Testing
- Report rights infringement
- published: 30 Aug 2008
- views: 473597
4:22
How to harden tool steel
published: 09 Sep 2014
How to harden tool steel
How to harden tool steel
- Report rights infringement
- published: 09 Sep 2014
- views: 758
Uddeholm - Tool Steel of World Class...
How to turn tool steel in a lathe...
Heat Treating 01 Tool Steel Plane Blank Irons at H...
Tool steel...
Tool Steel...
Turning & Machining a Boring Bar out of O1 Tool St...
Turning & Machining a Boring Bar out of O1 Tool St...
Mak - Knife Test in O1 Tool Steel...
T-10 Tool Steel Katana - Destructive Testing...
How to harden tool steel...
photo: AP Photo/Thibault Camus
Flooding Continues As Waters Rise in France
Edit WorldNews.com 02 Jun 2016
With over 8,000 rescue operations already underway, emergency workers have a battle against them as meteorologists warn the waters are expected to continue rising for days, according to The Associated Press. The Seine River has overflowed causing one town to be wholly evacuated as both government and citizen groups work to rescue those stranded by the flooding ... ... "Apart from that, we find it very entertaining ... –WN.com, Maureen Foody....
photo: Via YouTube
Baby with Zika-related microcephaly born at New Jersey hospital
Edit CNN 01 Jun 2016
(CNN)A baby with Zika virus-related microcephaly was born in New Jersey on Tuesday, hospital officials said. The baby and mother are stable and doing well following the cesarean delivery, said Dr. Abdulla Al-Kahan, director of maternal and fetal medicine at Hackensack University Medical Center. "The mother is stable, obviously sad, which is the normal emotional reaction given the situation," he said ... Read More ... CDC confirmation ... ....
photo: AP / Nick Ut
[BREAKING] Video: Murder-Suicide Places UCLA Campus On Lockdown
Edit WorldNews.com 01 Jun 2016
The UCLA campus was placed on lockdown just after 10 a.m. local time Wednesday when two men were killed in a murder/suicide in an on-campus shooting that prompted a massive response from local and federal law enforcement, the Los Angeles Police Department told The Los Angeles Times. "The campus is now safe," Los Angeles Police Chief Charlie Beck told reporters in a short news conference ... The FBI and the U.S ... – WN.com, Jack Durschlag. ....
photo: AP / Department of National Parks, Wildlife and Plant Conservation
Dozens of dead tiger cubs found in freezer at Thai temple
Edit The Irish Times 01 Jun 2016
Thai wildlife authorities found 40 tiger cub carcasses in a freezer in Thailand’s infamous Tiger Temple on Wednesday as they removed live animals in response to international pressure over suspected trafficking and abuse ... But the temple has been investigated for suspected links to wildlife trafficking and abuse ... Reuters. . . ....
photo: WN / Jamal Penjweny
Iraq’s Green Zone Turns Red, Signals Phase Four Of Pacification
Edit WorldNews.com 01 Jun 2016
Article by WN.com Correspondent Dallas DarlingWhen 150 Iraqi demonstrators were brutally beaten or shot to death trying to breach the Green Zone, it signaled Phase Four of the U.S.-led Global Police State and its attempt to pacify geopolitical spheres of influence, public spaces and war of narratives ... “Curse the government that kills its children in cold blood.” . This prophetic condemnation was actually mirrored by U.S ... May 28, 2016.....
« back to news headlines
ArcelorMittal engineer receives prestigious award from AIST (ArcelorMittal USA LLC)
Edit Public Technologies 26 May 2016
The President's Award Breakfast is one of the signature events of AISTech 2016 , the world's largest annual gathering of steel industry personnel ... Blazek's career in the steel industry began in 1971 ... This new process was able to continuously cast all steel grades with a refined structure void of any columnar dendrites and could produce tool steels with carbide distribution similar to tool steels produced with powder metallurgy....
voestalpine turnouts and rails for the Gotthard Base Tunnel (voestalpine AG)
Edit Public Technologies 25 May 2016
Customer segments include the railway infrastructure industry, the oil and gas industry, the steel and construction industry, as well as the mechanical engineering and automotive industries ... The voestalpine Group is a steel-based technology and capital goods group that operates worldwide ... The voestalpine Group is also the world market leader in turnout technology, special rails, tool steel, and special sections....
Final Determinations in the Antidumping Duty and Countervailing Duty Investigations of Imports of Certain Cold-Rolled Steel Flat Products from China (AD/CVD) and Japan (AD) (ITA - International Trade Administration)
Edit Public Technologies 18 May 2016
Commerce Finds Dumping of Imports of Certain Cold-Rolled Steel Flat Products from the People's Republic of China and Japan, and Countervailable Subsidization. of Imports of Certain Cold-Rolled Steel Flat Products from the People's Republic of China ... Ball bearing steels;1. Tool steels;2 ... 2 Tool steels are defined as steels which contain the following combinations of elements in the quantity by weight respectively indicated....
TransAct® to Demonstrate How “Epicentral® Has Growing Casino Revenue Down to a System” at G2E® ...
Edit Stockhouse 12 May 2016
- Full Range of TransAct’s Industry-Leading Epic Printers Also on Display - ... The printer delivers a number of industry-unique features, including an anti-jam front paper exit for reliable operation, the ability to print and stack up to 100 tickets without shuffling, a large 7.5-inch diameter paper roll, and the industry’s only full tool steel rotary cutter, making it the fastest transaction printer for the lottery industry. Mr ... or. JCIR....
TransAct® to Demonstrate How "Epicentral® Has Growing Casino Revenue Down to a System" at G2E® Asia 2016 (TransAct Technologies Incorporated)
Edit Public Technologies 12 May 2016
(Source. TransAct Technologies Incorporated). May 12, 2016 ... The printer delivers a number of industry-unique features, including an anti-jam front paper exit for reliable operation, the ability to print and stack up to 100 tickets without shuffling, a large 7.5-inch diameter paper roll, and the industry's only full tool steel rotary cutter, making it the fastest transaction printer for the lottery industry. Mr ... All rights reserved ... or....
LME Steel Scrap contract sees first voice-brokered trade (The London Metal Exchange Ltd)
Edit Public Technologies 10 May 2016
The London Metal Exchange (LME) today announces the first voice-brokered trade of its LME Steel Scrap contract ... 'Real industry prefers to hedge through trades quoted over the phone by their brokers, so this first voice-brokered trade shows these contracts are being accepted as risk management tools for the steel industry,' says Matthew Chamberlain, Head of Business Development at the LME....
SCHMOLZ + BICKENBACH AG Board of Directors constituted (Schmolz+Bickenbach AG)
Edit Public Technologies 05 May 2016
Lucerne, 4 May 2016 - The Board of Directors of SCHMOLZ + BICKENBACH AG, a global leader in special long steel, has been newly formed following re-election and strengthening ... The Group is one of the leading manufacturers of tool steel and non-corrosive long steel on the global market and one of the two larg- est companies in Europe for alloyed and high-alloyed constructional steel....
New CarTech® PremoMax™ Alloy Provides High-Strength and Toughness in Challenging Downhole Drilling Environments (Carpenter Technology Corporation)
Edit Public Technologies 03 May 2016
... a new proprietary premium-melted alloy steel, specifically developed for use in multiple downhole drilling applications, such as mud motor shafts and related components ... Carpenter produces and distributes premium alloys, including specialty alloys, titanium alloys and powder metals, as well as stainless steels, alloy steels and tool steels....
Universal Stainless Reports First Quarter 2016 Results (Universal Stainless & Alloy Products Inc)
Edit Public Technologies 27 Apr 2016
(Source. Universal Stainless & Alloy Products Inc) ... Webcast ... Universal Stainless & Alloy Products, Inc., headquartered in Bridgeville, PA, manufactures and markets semi-finished and finished specialty steels, including stainless steel, nickel alloys, tool steel and certain other alloyed steels ... Stainless steel $ 29,277 $ 44,398. High-strength low alloy steel 3,779 5,278. Tool steel 3,902 3,807. High-temperature alloy steel 1,640 1,418....
Universal Stainless Reports First Quarter 2016 Results
Edit Stockhouse 27 Apr 2016
Universal Stainless & Alloy Products, Inc., headquartered in Bridgeville, PA, manufactures and markets semi-finished and finished specialty steels, including stainless steel, nickel alloys, tool steel and certain other alloyed steels ... Stainless steel $ 29,277 $ 44,398 ... Tool steel 3,902 3,807 ....
Carpenter Technology Reports Third Quarter Results (Carpenter Technology Corporation)
Edit Public Technologies 26 Apr 2016voestalpine direct reduction plant in Texas starts plant tests (voestalpine AG)
Edit Public Technologies 21 Apr 2016
From the beginning of the next business year the new plant will produce two million tonnes of high quality HBI (hot briquetted iron, or 'sponge iron') annually, a sophisticated pre-material for steel production ... The voestalpine Group is a steel-based technology and capital goods group that operates worldwide ... The voestalpine Group is also the world market leader in turnout technology, special rails, tool steel, and special sections....
Carpenter Declares Quarterly Cash Dividend
Edit Stockhouse 20 Apr 2016
About Carpenter Technology. Carpenter produces and distributes premium alloys, including specialty alloys, titanium alloys and powder metals, as well as stainless steels, alloy steels and tool steels....
- 1
- 2
- 3
- 4
- 5
- Next page »
