- published: 03 Feb 2016
- views: 3408
Create your page here
Wednesday, 08 June 2016
-
remove the playlistReplicator
-
remove the playlistLatest Videos
-
remove the playlistLongest Videos
- remove the playlistReplicator
- remove the playlistLatest Videos
- remove the playlistLongest Videos
back to playlist
Reviewed in Guitarist 404
Gear demos playlist: http://goo.gl/30cAf Subscribe for more from Guitarist: http://goo.gl/2PRXE
Buy Guitarist magazine in print and digital forms: http://www.myfavouritemagazines.co.uk/content/lp/digitalbundles/mm-guitarist/
Visit our website: http://www.guitarist.co.uk Facebook: http://www.facebook.com/guitaristmagazine Twitter: http://www.twitter.com/Guitarist_Mag
Lars Dahl-Jorgensen, founder of T-Rex Engineering, stopped by the shop to show off their highly anticipated analog tape delay pedal, The Replicator (http://goo.gl/X47i8t). Andrew, Alex, Shelby, and Joel put the pedal through the paces with a range of guitars: The Rock N Roll Relics Richards (http://goo.gl/MssgaC), a Fender Custom Shop Journeyman Relic Stratocaster (http://goo.gl/f7Olpz), and a one-of-a-kind Gibson L-7C Goldtop from 1949 (http://goo.gl/plVAaP). Last but not least, pushing out all of these sweet tape echo tones is the Supro 1622RT Combo (http://goo.gl/zpGXM8).
The Replicator is T-Rex Engineering's take on the ultimate tape echo unit, complete with a motor, magnetic heads and a tape cartridge. The goal T-Rex set out to accomplish was to make a tape echo unit that could nail the sound quality of the old echo units, but surpass them in features. With the application of tap tempo, two playback heads for three output modes and a chorus mode that modulates the pitch of the echoes, we would say they nailed it.
T-Rex Replicator Analog Tape Delay: http://goo.gl/X47i8t
Rock N Roll Relics Richards Butterscotch w/D. Allen P51/Bobcat Pickups: http://goo.gl/MssgaC
Fender Custom Shop 1963 Stratocaster Journeyman Relic Aged Olympic White (Serial #81938): http://goo.gl/f7Olpz
Gibson L-7C Gold 1949: http://goo.gl/plVAaP
Supro 1622RT Tremo-Verb 25W 1x10 Combo: http://goo.gl/zpGXM8
Hear original music from Andrew on his website: http://www.andrewkentwittler.com/
Shelby plays guitar in the band Minor Characters. Check them out at http://minorcharactersmusic.com/
Joel plays in sci-fi yacht metal band Royale, check them out here: http://www.royaletheband.com/
To hear original music from Alex Chadwick, go to http://westernautomatic.com/
- published: 05 Dec 2015
- views: 96009
To read more: http://www.kayrus.com/legos/replicatorFirstLook
I just got my hands on the brand new Makerbot Replicator! In the video, I go through the leveling procedure and show a test print of an Octopus. This isn't a review or comparison of any sort.. simply a video of the new printer in action!
Comment below to share your thoughts about the new Replicator..
Thanks goes to my workplace Cortona Academy through which I am able to work with this and many other cool machines!
- published: 19 Mar 2014
- views: 125456
Star Trek Replicator From show Star Trek Enterprise season 2 episode 4
- published: 17 Jun 2014
- views: 18731
MakerBot hat auf der CES 2014 sein komplettes 3D-Drucker-Ökosystem vorgestellt, darunter den Replicator Mini, den neuen Replicator und den Z18. Ebenfalls neu: Der 3D-Scanner Digitizer.
Video: MakerBot Replicator2 im Praxis-Test: http://www.chip.de/video/Makerbot-Replicator-2-3D-Drucker-Test-Video_62025054.html
Haben Sie Probleme mit ihrem Drucker? Im CHIP Forum kann ihnen geholfen werden: http://chip.biz/1f6GzNs
- published: 14 Jan 2014
- views: 37135
Hey guitarists, check out the T-Rex Replicator analog delay pedal! With a real analog tape cassette and two playback heads you've got access to three delay modes. Use the two expression pedal inputs to affect delay time and feedback for trippy modulation effects. You can even use it as an effects processor for line level signals. Complete with tap tempo and a chorus mode, the T-Rex Replicator delay pedal makes real analog tape delay practical for your pedalboard.
Get the T-Rex Replicator analog tape delay pedal here: http://www.sweetwater.com/store/detail/Replicator
- published: 15 Feb 2016
- views: 2594
For more information visit http://creative-tools.com
DESCRIPTION
The MakerBot Replicator Z18 5th generation 3D printer has a large build volume of 305(L) x 305(D) x 457(H) mm (42 475 cubic centimetres).
We 3D-scanned 3D-printing evangelist Daniel Norée with a ASUS XTION handheld 3D-scanner. The file was then post-processed in Autodesk MeshMixer and then imported into MakerBot Desktop 3D-printing software, where it was sliced and sent to the Z18 3D printer.
The 3D-printed statue of Daniel Norée measured 457 mm (18 inches) tall and took approx. 49 hours to 3D-print. Support structures were automatically calculated by the MakerBot software which we removed manually with pliers and exacto knife. The total amount of material used was approximately 400 grams of PLA filament.
The time-lapse-base segments of this video where recorded with a Brinno TLC200 PRO Time Lapse Camera. http://brinno.creativetools.se
- published: 13 Jan 2015
- views: 36045
3D printers allow users to print 3 dimensional computer files into actual objects, depending on the material being used by the printer. One company leading the way for consumers is MakerBot and their Replicator 2x is in hot demand, most buyers wait 2 months after paying to receive it.
Finally got mine this week and recorded the opening, set up and test printing. It seems as if there is a fine line between only using these 3D printers for gimmicky creations only vs things people can actually use. Much of this depends on how well one knows a 3D modeling program. I have quite a few photography related designs I would like to make to actually use in my photo work, and I am realizing now that I will have to really learn one of many 3D modeling programs to make it happen.
The Replicator 2x is working great, its been going pretty much non-stop since Ive opened it, and most the prints are successful with a few hiccups.
Ill have much more coming over the next couple weeks as I get better with the 3D software. (I am using blender right now).
- published: 25 May 2013
- views: 135899
Checking out the Makerbot Replicator 2 3D printer and talking about the future of 3D printing.
- published: 21 Jan 2013
- views: 189237
Hi Guys!
In this video I am going to show you how to set up your MakerBot 5th Generation 3D printer.
To buy a 5th Generation MakerBot 3D printer click the following link:
http://www.imakr.com/3d-printers/20-makerbot-replicator-5th-generation.html
For more information about our current offers and training go to:
iMakr.com
For free 3D printable objects go to:
MyMiniFactory.com
About the MakerBot Replicator 5th Generation Printer:
HARDWARE
The 5th Generation is powered by a new user-friendly MakerBot Replicator 3D Printing Platform which is App and cloud enabled. USB and Ethernet connectivity ensures a seamless production workflow (Wi-Fi coming soon). There is also a new MakerBot Replicator Smart Extruder, motion controllers, and gantry design. A handy on-board camera plus diagnostics and assisted build plate leveling. Build volume of 7,522 cubic centimeters [456 cubic inches]. 11% larger than the MakerBot Replicator 2 Desktop 3D Printer! Create professional-quality, high-resolution prototypes and complex models with 100 micron resolution layering. Glass build platform.
• Full colour LCD display with on-board utilities to help you set-up and maintain your printer.
• Makerbot Replicator smart extruder - easy to swap or replace, detects filament absence and automatically pauses your print. Sends notifications to your MakerBot desktop and MakerBot mobile apps.
• On baord camera for print monitoring and easy sharing to MakerBot Thingiverse and social networks. Accessible through MakerBot Desktop and MakerBot Mobile apps. Automatically takes reference pictures of final prints and saves them to your cloud storage library.
• Mobile control - free and friendly MakerBot Mobile app (available Spring 2014).
• 4 Ways to connect: USB stick, USB cable, Ethernet cable and Wi-Fi (coming soon).
• Full-featured Software, download for free.
• Assisted leveling with visual feedback to make leveling easier and increase precision for consistent higher-quality printing.
SOFTWARE
MakerWare is the ideal software to drive your MakerBot—and not just because it's pretty and simple to use. Makerbot are always improving their slicing engine, the algorithm that tells your MakerBot what to make and how to make it, so you get stronger, faster, more consistent results.
Use MakerWare to:
Open multiple .stl and .obj files at once and arrange them on the build platform. Scale, move, and rotate individual models or groups of models at once. Set up two-color prints for your MakerBot Replicator or Replicator 2X with new easy dual extrusion integration.
- published: 09 Sep 2014
- views: 9298
Replicator may refer to various things related to replication and self-replication:
This page contains text from Wikipedia, the Free Encyclopedia -
http://en.wikipedia.org/wiki/Replicator
This article is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License, which means that you can copy and modify it as long as the entire work (including additions) remains under this license.
This article is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License, which means that you can copy and modify it as long as the entire work (including additions) remains under this license.
- Loading...
-
6:39T-Rex Replicator Tape Echo Demo
T-Rex Replicator Tape Echo DemoT-Rex Replicator Tape Echo Demo
Reviewed in Guitarist 404 Gear demos playlist: http://goo.gl/30cAf Subscribe for more from Guitarist: http://goo.gl/2PRXE Buy Guitarist magazine in print and digital forms: http://www.myfavouritemagazines.co.uk/content/lp/digitalbundles/mm-guitarist/ Visit our website: http://www.guitarist.co.uk Facebook: http://www.facebook.com/guitaristmagazine Twitter: http://www.twitter.com/Guitarist_Mag -
8:22T-Rex Replicator Analog Tape Echo Pedal Demo
T-Rex Replicator Analog Tape Echo Pedal DemoT-Rex Replicator Analog Tape Echo Pedal Demo
Lars Dahl-Jorgensen, founder of T-Rex Engineering, stopped by the shop to show off their highly anticipated analog tape delay pedal, The Replicator (http://goo.gl/X47i8t). Andrew, Alex, Shelby, and Joel put the pedal through the paces with a range of guitars: The Rock N Roll Relics Richards (http://goo.gl/MssgaC), a Fender Custom Shop Journeyman Relic Stratocaster (http://goo.gl/f7Olpz), and a one-of-a-kind Gibson L-7C Goldtop from 1949 (http://goo.gl/plVAaP). Last but not least, pushing out all of these sweet tape echo tones is the Supro 1622RT Combo (http://goo.gl/zpGXM8). The Replicator is T-Rex Engineering's take on the ultimate tape echo unit, complete with a motor, magnetic heads and a tape cartridge. The goal T-Rex set out to accomplish was to make a tape echo unit that could nail the sound quality of the old echo units, but surpass them in features. With the application of tap tempo, two playback heads for three output modes and a chorus mode that modulates the pitch of the echoes, we would say they nailed it. T-Rex Replicator Analog Tape Delay: http://goo.gl/X47i8t Rock N Roll Relics Richards Butterscotch w/D. Allen P51/Bobcat Pickups: http://goo.gl/MssgaC Fender Custom Shop 1963 Stratocaster Journeyman Relic Aged Olympic White (Serial #81938): http://goo.gl/f7Olpz Gibson L-7C Gold 1949: http://goo.gl/plVAaP Supro 1622RT Tremo-Verb 25W 1x10 Combo: http://goo.gl/zpGXM8 Hear original music from Andrew on his website: http://www.andrewkentwittler.com/ Shelby plays guitar in the band Minor Characters. Check them out at http://minorcharactersmusic.com/ Joel plays in sci-fi yacht metal band Royale, check them out here: http://www.royaletheband.com/ To hear original music from Alex Chadwick, go to http://westernautomatic.com/ -
7:34FIRST LOOK: Makerbot Replicator 5TH GEN Desktop 3D Printer!!
FIRST LOOK: Makerbot Replicator 5TH GEN Desktop 3D Printer!!FIRST LOOK: Makerbot Replicator 5TH GEN Desktop 3D Printer!!
To read more: http://www.kayrus.com/legos/replicatorFirstLook I just got my hands on the brand new Makerbot Replicator! In the video, I go through the leveling procedure and show a test print of an Octopus. This isn't a review or comparison of any sort.. simply a video of the new printer in action! Comment below to share your thoughts about the new Replicator.. Thanks goes to my workplace Cortona Academy through which I am able to work with this and many other cool machines! -
1:47Star Trek Replicator
Star Trek Replicator -
3:02MakerBot Replicator, Mini, Z18 - Erster Praxis-Test - CES 2014 | CHIP
MakerBot Replicator, Mini, Z18 - Erster Praxis-Test - CES 2014 | CHIPMakerBot Replicator, Mini, Z18 - Erster Praxis-Test - CES 2014 | CHIP
MakerBot hat auf der CES 2014 sein komplettes 3D-Drucker-Ökosystem vorgestellt, darunter den Replicator Mini, den neuen Replicator und den Z18. Ebenfalls neu: Der 3D-Scanner Digitizer. Video: MakerBot Replicator2 im Praxis-Test: http://www.chip.de/video/Makerbot-Replicator-2-3D-Drucker-Test-Video_62025054.html Haben Sie Probleme mit ihrem Drucker? Im CHIP Forum kann ihnen geholfen werden: http://chip.biz/1f6GzNs -
5:46T-Rex Replicator Analog Tape Delay Review by Sweetwater
T-Rex Replicator Analog Tape Delay Review by SweetwaterT-Rex Replicator Analog Tape Delay Review by Sweetwater
Hey guitarists, check out the T-Rex Replicator analog delay pedal! With a real analog tape cassette and two playback heads you've got access to three delay modes. Use the two expression pedal inputs to affect delay time and feedback for trippy modulation effects. You can even use it as an effects processor for line level signals. Complete with tap tempo and a chorus mode, the T-Rex Replicator delay pedal makes real analog tape delay practical for your pedalboard. Get the T-Rex Replicator analog tape delay pedal here: http://www.sweetwater.com/store/detail/Replicator -
2:46MakerBot Replicator Z18 3D-prints Daniel Norée
MakerBot Replicator Z18 3D-prints Daniel NoréeMakerBot Replicator Z18 3D-prints Daniel Norée
For more information visit http://creative-tools.com DESCRIPTION The MakerBot Replicator Z18 5th generation 3D printer has a large build volume of 305(L) x 305(D) x 457(H) mm (42 475 cubic centimetres). We 3D-scanned 3D-printing evangelist Daniel Norée with a ASUS XTION handheld 3D-scanner. The file was then post-processed in Autodesk MeshMixer and then imported into MakerBot Desktop 3D-printing software, where it was sliced and sent to the Z18 3D printer. The 3D-printed statue of Daniel Norée measured 457 mm (18 inches) tall and took approx. 49 hours to 3D-print. Support structures were automatically calculated by the MakerBot software which we removed manually with pliers and exacto knife. The total amount of material used was approximately 400 grams of PLA filament. The time-lapse-base segments of this video where recorded with a Brinno TLC200 PRO Time Lapse Camera. http://brinno.creativetools.se -
34:42Replicator 2x Unboxing Experience | MakerBot 3D Printer | Setup Testing
Replicator 2x Unboxing Experience | MakerBot 3D Printer | Setup TestingReplicator 2x Unboxing Experience | MakerBot 3D Printer | Setup Testing
3D printers allow users to print 3 dimensional computer files into actual objects, depending on the material being used by the printer. One company leading the way for consumers is MakerBot and their Replicator 2x is in hot demand, most buyers wait 2 months after paying to receive it. Finally got mine this week and recorded the opening, set up and test printing. It seems as if there is a fine line between only using these 3D printers for gimmicky creations only vs things people can actually use. Much of this depends on how well one knows a 3D modeling program. I have quite a few photography related designs I would like to make to actually use in my photo work, and I am realizing now that I will have to really learn one of many 3D modeling programs to make it happen. The Replicator 2x is working great, its been going pretty much non-stop since Ive opened it, and most the prints are successful with a few hiccups. Ill have much more coming over the next couple weeks as I get better with the 3D software. (I am using blender right now). -
4:283D Printing with Makerbot Replicator 2 || Gadgetology
3D Printing with Makerbot Replicator 2 || Gadgetology3D Printing with Makerbot Replicator 2 || Gadgetology
Checking out the Makerbot Replicator 2 3D printer and talking about the future of 3D printing. -
6:44Makerbot Replicator (5th Generation) Set Up
Makerbot Replicator (5th Generation) Set UpMakerbot Replicator (5th Generation) Set Up
Hi Guys! In this video I am going to show you how to set up your MakerBot 5th Generation 3D printer. To buy a 5th Generation MakerBot 3D printer click the following link: http://www.imakr.com/3d-printers/20-makerbot-replicator-5th-generation.html For more information about our current offers and training go to: iMakr.com For free 3D printable objects go to: MyMiniFactory.com About the MakerBot Replicator 5th Generation Printer: HARDWARE The 5th Generation is powered by a new user-friendly MakerBot Replicator 3D Printing Platform which is App and cloud enabled. USB and Ethernet connectivity ensures a seamless production workflow (Wi-Fi coming soon). There is also a new MakerBot Replicator Smart Extruder, motion controllers, and gantry design. A handy on-board camera plus diagnostics and assisted build plate leveling. Build volume of 7,522 cubic centimeters [456 cubic inches]. 11% larger than the MakerBot Replicator 2 Desktop 3D Printer! Create professional-quality, high-resolution prototypes and complex models with 100 micron resolution layering. Glass build platform. • Full colour LCD display with on-board utilities to help you set-up and maintain your printer. • Makerbot Replicator smart extruder - easy to swap or replace, detects filament absence and automatically pauses your print. Sends notifications to your MakerBot desktop and MakerBot mobile apps. • On baord camera for print monitoring and easy sharing to MakerBot Thingiverse and social networks. Accessible through MakerBot Desktop and MakerBot Mobile apps. Automatically takes reference pictures of final prints and saves them to your cloud storage library. • Mobile control - free and friendly MakerBot Mobile app (available Spring 2014). • 4 Ways to connect: USB stick, USB cable, Ethernet cable and Wi-Fi (coming soon). • Full-featured Software, download for free. • Assisted leveling with visual feedback to make leveling easier and increase precision for consistent higher-quality printing. SOFTWARE MakerWare is the ideal software to drive your MakerBot—and not just because it's pretty and simple to use. Makerbot are always improving their slicing engine, the algorithm that tells your MakerBot what to make and how to make it, so you get stronger, faster, more consistent results. Use MakerWare to: Open multiple .stl and .obj files at once and arrange them on the build platform. Scale, move, and rotate individual models or groups of models at once. Set up two-color prints for your MakerBot Replicator or Replicator 2X with new easy dual extrusion integration.
Replicator
ALBUMS
- Machines Will Always Let You Down released: 2007
- You Are Under Surveilance released: 2004
- Live at KLXU released: 2003
- Winterval released: 2001
Machines Will Always Let You Down
Released 2007- add to main playlist Play in Full Screen Delicious Fornicake
- add to main playlist Play in Full Screen Payment www.yzzz.rd
- add to main playlist Play in Full Screen Assloads of Unrespect
- add to main playlist Play in Full Screen Fashionably Latent
- add to main playlist Play in Full Screen Enigma Machine
- add to main playlist Play in Full Screen King Shit of Fuck Mountain
- add to main playlist Play in Full Screen Happy Loyalty Day
- add to main playlist Play in Full Screen The Tiny Machines Are (Still) Out for Revenge
- add to main playlist Play in Full Screen Outrage Fatigue
- add to main playlist Play in Full Screen Login With My Fist
You Are Under Surveilance
Released 2004- add to main playlist Play in Full Screen The Frogurt Is Cursed
- add to main playlist Play in Full Screen Alert Status: 0
- add to main playlist Play in Full Screen It Seems Like the Real Deal, but the Citizenship Doesn't Hurt
- add to main playlist Play in Full Screen Epoch
- add to main playlist Play in Full Screen Mutually Assured Repulsion
- add to main playlist Play in Full Screen Warrior Needs Food, Badly
- add to main playlist Play in Full Screen The Weight of 3 Marlon Brandos
- add to main playlist Play in Full Screen Ft. Jesus
Winterval
Released 2001- add to main playlist Play in Full Screen (No More) Salted Beef
- add to main playlist Play in Full Screen Soda Troll
- add to main playlist Play in Full Screen Journey to the End of the Night, Part II
- add to main playlist Play in Full Screen Ka Tet
- add to main playlist Play in Full Screen Motivationally Challenged
- add to main playlist Play in Full Screen Strategery
- add to main playlist Play in Full Screen Will C. Wood
- add to main playlist Play in Full Screen Taxi Driving
-
T-Rex Replicator Tape Echo Demo
Reviewed in Guitarist 404 Gear demos playlist: http://goo.gl/30cAf Subscribe for more from Guitarist: http://goo.gl/2PRXE Buy Guitarist magazine in print and digital forms: http://www.myfavouritemagazines.co.uk/content/lp/digitalbundles/mm-guitarist/ Visit our website: http://www.guitarist.co.uk Facebook: http://www.facebook.com/guitaristmagazine Twitter: http://www.twitter.com/Guitarist_Mag -
T-Rex Replicator Analog Tape Echo Pedal Demo
Lars Dahl-Jorgensen, founder of T-Rex Engineering, stopped by the shop to show off their highly anticipated analog tape delay pedal, The Replicator (http://goo.gl/X47i8t). Andrew, Alex, Shelby, and Joel put the pedal through the paces with a range of guitars: The Rock N Roll Relics Richards (http://goo.gl/MssgaC), a Fender Custom Shop Journeyman Relic Stratocaster (http://goo.gl/f7Olpz), and a one-of-a-kind Gibson L-7C Goldtop from 1949 (http://goo.gl/plVAaP). Last but not least, pushing out all of these sweet tape echo tones is the Supro 1622RT Combo (http://goo.gl/zpGXM8). The Replicator is T-Rex Engineering's take on the ultimate tape echo unit, complete with a motor, magnetic heads and a tape cartridge. The goal T-Rex set out to accomplish was to make a tape echo unit that could nail ... -
FIRST LOOK: Makerbot Replicator 5TH GEN Desktop 3D Printer!!
To read more: http://www.kayrus.com/legos/replicatorFirstLook I just got my hands on the brand new Makerbot Replicator! In the video, I go through the leveling procedure and show a test print of an Octopus. This isn't a review or comparison of any sort.. simply a video of the new printer in action! Comment below to share your thoughts about the new Replicator.. Thanks goes to my workplace Cortona Academy through which I am able to work with this and many other cool machines! -
-
MakerBot Replicator, Mini, Z18 - Erster Praxis-Test - CES 2014 | CHIP
MakerBot hat auf der CES 2014 sein komplettes 3D-Drucker-Ökosystem vorgestellt, darunter den Replicator Mini, den neuen Replicator und den Z18. Ebenfalls neu: Der 3D-Scanner Digitizer. Video: MakerBot Replicator2 im Praxis-Test: http://www.chip.de/video/Makerbot-Replicator-2-3D-Drucker-Test-Video_62025054.html Haben Sie Probleme mit ihrem Drucker? Im CHIP Forum kann ihnen geholfen werden: http://chip.biz/1f6GzNs -
T-Rex Replicator Analog Tape Delay Review by Sweetwater
Hey guitarists, check out the T-Rex Replicator analog delay pedal! With a real analog tape cassette and two playback heads you've got access to three delay modes. Use the two expression pedal inputs to affect delay time and feedback for trippy modulation effects. You can even use it as an effects processor for line level signals. Complete with tap tempo and a chorus mode, the T-Rex Replicator delay pedal makes real analog tape delay practical for your pedalboard. Get the T-Rex Replicator analog tape delay pedal here: http://www.sweetwater.com/store/detail/Replicator -
MakerBot Replicator Z18 3D-prints Daniel Norée
For more information visit http://creative-tools.com DESCRIPTION The MakerBot Replicator Z18 5th generation 3D printer has a large build volume of 305(L) x 305(D) x 457(H) mm (42 475 cubic centimetres). We 3D-scanned 3D-printing evangelist Daniel Norée with a ASUS XTION handheld 3D-scanner. The file was then post-processed in Autodesk MeshMixer and then imported into MakerBot Desktop 3D-printing software, where it was sliced and sent to the Z18 3D printer. The 3D-printed statue of Daniel Norée measured 457 mm (18 inches) tall and took approx. 49 hours to 3D-print. Support structures were automatically calculated by the MakerBot software which we removed manually with pliers and exacto knife. The total amount of material used was approximately 400 grams of PLA filament. The time-lapse-... -
Replicator 2x Unboxing Experience | MakerBot 3D Printer | Setup Testing
3D printers allow users to print 3 dimensional computer files into actual objects, depending on the material being used by the printer. One company leading the way for consumers is MakerBot and their Replicator 2x is in hot demand, most buyers wait 2 months after paying to receive it. Finally got mine this week and recorded the opening, set up and test printing. It seems as if there is a fine line between only using these 3D printers for gimmicky creations only vs things people can actually use. Much of this depends on how well one knows a 3D modeling program. I have quite a few photography related designs I would like to make to actually use in my photo work, and I am realizing now that I will have to really learn one of many 3D modeling programs to make it happen. The Replicator 2x i... -
3D Printing with Makerbot Replicator 2 || Gadgetology
Checking out the Makerbot Replicator 2 3D printer and talking about the future of 3D printing. -
Makerbot Replicator (5th Generation) Set Up
Hi Guys! In this video I am going to show you how to set up your MakerBot 5th Generation 3D printer. To buy a 5th Generation MakerBot 3D printer click the following link: http://www.imakr.com/3d-printers/20-makerbot-replicator-5th-generation.html For more information about our current offers and training go to: iMakr.com For free 3D printable objects go to: MyMiniFactory.com About the MakerBot Replicator 5th Generation Printer: HARDWARE The 5th Generation is powered by a new user-friendly MakerBot Replicator 3D Printing Platform which is App and cloud enabled. USB and Ethernet connectivity ensures a seamless production workflow (Wi-Fi coming soon). There is also a new MakerBot Replicator Smart Extruder, motion controllers, and gantry design. A handy on-board camera plus diagnostics ...
T-Rex Replicator Tape Echo Demo
- Order: Reorder
- Duration: 6:39
- Updated: 03 Feb 2016
- views: 3408
Reviewed in Guitarist 404
Gear demos playlist: http://goo.gl/30cAf Subscribe for more from Guitarist: http://goo.gl/2PRXE
Buy Guitarist magazine in print and ...
Reviewed in Guitarist 404
Gear demos playlist: http://goo.gl/30cAf Subscribe for more from Guitarist: http://goo.gl/2PRXE
Buy Guitarist magazine in print and digital forms: http://www.myfavouritemagazines.co.uk/content/lp/digitalbundles/mm-guitarist/
Visit our website: http://www.guitarist.co.uk Facebook: http://www.facebook.com/guitaristmagazine Twitter: http://www.twitter.com/Guitarist_Mag
wn.com/T Rex Replicator Tape Echo Demo
Reviewed in Guitarist 404
Gear demos playlist: http://goo.gl/30cAf Subscribe for more from Guitarist: http://goo.gl/2PRXE
Buy Guitarist magazine in print and digital forms: http://www.myfavouritemagazines.co.uk/content/lp/digitalbundles/mm-guitarist/
Visit our website: http://www.guitarist.co.uk Facebook: http://www.facebook.com/guitaristmagazine Twitter: http://www.twitter.com/Guitarist_Mag
- published: 03 Feb 2016
- views: 3408
T-Rex Replicator Analog Tape Echo Pedal Demo
- Order: Reorder
- Duration: 8:22
- Updated: 05 Dec 2015
- views: 96009
Lars Dahl-Jorgensen, founder of T-Rex Engineering, stopped by the shop to show off their highly anticipated analog tape delay pedal, The Replicator (http://goo....
Lars Dahl-Jorgensen, founder of T-Rex Engineering, stopped by the shop to show off their highly anticipated analog tape delay pedal, The Replicator (http://goo.gl/X47i8t). Andrew, Alex, Shelby, and Joel put the pedal through the paces with a range of guitars: The Rock N Roll Relics Richards (http://goo.gl/MssgaC), a Fender Custom Shop Journeyman Relic Stratocaster (http://goo.gl/f7Olpz), and a one-of-a-kind Gibson L-7C Goldtop from 1949 (http://goo.gl/plVAaP). Last but not least, pushing out all of these sweet tape echo tones is the Supro 1622RT Combo (http://goo.gl/zpGXM8).
The Replicator is T-Rex Engineering's take on the ultimate tape echo unit, complete with a motor, magnetic heads and a tape cartridge. The goal T-Rex set out to accomplish was to make a tape echo unit that could nail the sound quality of the old echo units, but surpass them in features. With the application of tap tempo, two playback heads for three output modes and a chorus mode that modulates the pitch of the echoes, we would say they nailed it.
T-Rex Replicator Analog Tape Delay: http://goo.gl/X47i8t
Rock N Roll Relics Richards Butterscotch w/D. Allen P51/Bobcat Pickups: http://goo.gl/MssgaC
Fender Custom Shop 1963 Stratocaster Journeyman Relic Aged Olympic White (Serial #81938): http://goo.gl/f7Olpz
Gibson L-7C Gold 1949: http://goo.gl/plVAaP
Supro 1622RT Tremo-Verb 25W 1x10 Combo: http://goo.gl/zpGXM8
Hear original music from Andrew on his website: http://www.andrewkentwittler.com/
Shelby plays guitar in the band Minor Characters. Check them out at http://minorcharactersmusic.com/
Joel plays in sci-fi yacht metal band Royale, check them out here: http://www.royaletheband.com/
To hear original music from Alex Chadwick, go to http://westernautomatic.com/
wn.com/T Rex Replicator Analog Tape Echo Pedal Demo
Lars Dahl-Jorgensen, founder of T-Rex Engineering, stopped by the shop to show off their highly anticipated analog tape delay pedal, The Replicator (http://goo.gl/X47i8t). Andrew, Alex, Shelby, and Joel put the pedal through the paces with a range of guitars: The Rock N Roll Relics Richards (http://goo.gl/MssgaC), a Fender Custom Shop Journeyman Relic Stratocaster (http://goo.gl/f7Olpz), and a one-of-a-kind Gibson L-7C Goldtop from 1949 (http://goo.gl/plVAaP). Last but not least, pushing out all of these sweet tape echo tones is the Supro 1622RT Combo (http://goo.gl/zpGXM8).
The Replicator is T-Rex Engineering's take on the ultimate tape echo unit, complete with a motor, magnetic heads and a tape cartridge. The goal T-Rex set out to accomplish was to make a tape echo unit that could nail the sound quality of the old echo units, but surpass them in features. With the application of tap tempo, two playback heads for three output modes and a chorus mode that modulates the pitch of the echoes, we would say they nailed it.
T-Rex Replicator Analog Tape Delay: http://goo.gl/X47i8t
Rock N Roll Relics Richards Butterscotch w/D. Allen P51/Bobcat Pickups: http://goo.gl/MssgaC
Fender Custom Shop 1963 Stratocaster Journeyman Relic Aged Olympic White (Serial #81938): http://goo.gl/f7Olpz
Gibson L-7C Gold 1949: http://goo.gl/plVAaP
Supro 1622RT Tremo-Verb 25W 1x10 Combo: http://goo.gl/zpGXM8
Hear original music from Andrew on his website: http://www.andrewkentwittler.com/
Shelby plays guitar in the band Minor Characters. Check them out at http://minorcharactersmusic.com/
Joel plays in sci-fi yacht metal band Royale, check them out here: http://www.royaletheband.com/
To hear original music from Alex Chadwick, go to http://westernautomatic.com/
- published: 05 Dec 2015
- views: 96009
FIRST LOOK: Makerbot Replicator 5TH GEN Desktop 3D Printer!!
- Order: Reorder
- Duration: 7:34
- Updated: 19 Mar 2014
- views: 125456
To read more: http://www.kayrus.com/legos/replicatorFirstLook
I just got my hands on the brand new Makerbot Replicator! In the video, I go through the leveling...
To read more: http://www.kayrus.com/legos/replicatorFirstLook
I just got my hands on the brand new Makerbot Replicator! In the video, I go through the leveling procedure and show a test print of an Octopus. This isn't a review or comparison of any sort.. simply a video of the new printer in action!
Comment below to share your thoughts about the new Replicator..
Thanks goes to my workplace Cortona Academy through which I am able to work with this and many other cool machines!
wn.com/First Look Makerbot Replicator 5Th Gen Desktop 3D Printer
To read more: http://www.kayrus.com/legos/replicatorFirstLook
I just got my hands on the brand new Makerbot Replicator! In the video, I go through the leveling procedure and show a test print of an Octopus. This isn't a review or comparison of any sort.. simply a video of the new printer in action!
Comment below to share your thoughts about the new Replicator..
Thanks goes to my workplace Cortona Academy through which I am able to work with this and many other cool machines!
- published: 19 Mar 2014
- views: 125456
Star Trek Replicator
- Order: Reorder
- Duration: 1:47
- Updated: 17 Jun 2014
- views: 18731
Star Trek Replicator From show Star Trek Enterprise season 2 episode 4
- published: 17 Jun 2014
- views: 18731
MakerBot Replicator, Mini, Z18 - Erster Praxis-Test - CES 2014 | CHIP
- Order: Reorder
- Duration: 3:02
- Updated: 14 Jan 2014
- views: 37135
MakerBot hat auf der CES 2014 sein komplettes 3D-Drucker-Ökosystem vorgestellt, darunter den Replicator Mini, den neuen Replicator und den Z18. Ebenfalls neu: D...
MakerBot hat auf der CES 2014 sein komplettes 3D-Drucker-Ökosystem vorgestellt, darunter den Replicator Mini, den neuen Replicator und den Z18. Ebenfalls neu: Der 3D-Scanner Digitizer.
Video: MakerBot Replicator2 im Praxis-Test: http://www.chip.de/video/Makerbot-Replicator-2-3D-Drucker-Test-Video_62025054.html
Haben Sie Probleme mit ihrem Drucker? Im CHIP Forum kann ihnen geholfen werden: http://chip.biz/1f6GzNs
wn.com/Makerbot Replicator, Mini, Z18 Erster Praxis Test Ces 2014 | Chip
MakerBot hat auf der CES 2014 sein komplettes 3D-Drucker-Ökosystem vorgestellt, darunter den Replicator Mini, den neuen Replicator und den Z18. Ebenfalls neu: Der 3D-Scanner Digitizer.
Video: MakerBot Replicator2 im Praxis-Test: http://www.chip.de/video/Makerbot-Replicator-2-3D-Drucker-Test-Video_62025054.html
Haben Sie Probleme mit ihrem Drucker? Im CHIP Forum kann ihnen geholfen werden: http://chip.biz/1f6GzNs
- published: 14 Jan 2014
- views: 37135
T-Rex Replicator Analog Tape Delay Review by Sweetwater
- Order: Reorder
- Duration: 5:46
- Updated: 15 Feb 2016
- views: 2594
Hey guitarists, check out the T-Rex Replicator analog delay pedal! With a real analog tape cassette and two playback heads you've got access to three delay mode...
Hey guitarists, check out the T-Rex Replicator analog delay pedal! With a real analog tape cassette and two playback heads you've got access to three delay modes. Use the two expression pedal inputs to affect delay time and feedback for trippy modulation effects. You can even use it as an effects processor for line level signals. Complete with tap tempo and a chorus mode, the T-Rex Replicator delay pedal makes real analog tape delay practical for your pedalboard.
Get the T-Rex Replicator analog tape delay pedal here: http://www.sweetwater.com/store/detail/Replicator
wn.com/T Rex Replicator Analog Tape Delay Review By Sweetwater
Hey guitarists, check out the T-Rex Replicator analog delay pedal! With a real analog tape cassette and two playback heads you've got access to three delay modes. Use the two expression pedal inputs to affect delay time and feedback for trippy modulation effects. You can even use it as an effects processor for line level signals. Complete with tap tempo and a chorus mode, the T-Rex Replicator delay pedal makes real analog tape delay practical for your pedalboard.
Get the T-Rex Replicator analog tape delay pedal here: http://www.sweetwater.com/store/detail/Replicator
- published: 15 Feb 2016
- views: 2594
MakerBot Replicator Z18 3D-prints Daniel Norée
- Order: Reorder
- Duration: 2:46
- Updated: 13 Jan 2015
- views: 36045
For more information visit http://creative-tools.com
DESCRIPTION
The MakerBot Replicator Z18 5th generation 3D printer has a large build volume of 305(L) x 305...
For more information visit http://creative-tools.com
DESCRIPTION
The MakerBot Replicator Z18 5th generation 3D printer has a large build volume of 305(L) x 305(D) x 457(H) mm (42 475 cubic centimetres).
We 3D-scanned 3D-printing evangelist Daniel Norée with a ASUS XTION handheld 3D-scanner. The file was then post-processed in Autodesk MeshMixer and then imported into MakerBot Desktop 3D-printing software, where it was sliced and sent to the Z18 3D printer.
The 3D-printed statue of Daniel Norée measured 457 mm (18 inches) tall and took approx. 49 hours to 3D-print. Support structures were automatically calculated by the MakerBot software which we removed manually with pliers and exacto knife. The total amount of material used was approximately 400 grams of PLA filament.
The time-lapse-base segments of this video where recorded with a Brinno TLC200 PRO Time Lapse Camera. http://brinno.creativetools.se
wn.com/Makerbot Replicator Z18 3D Prints Daniel NoréE
For more information visit http://creative-tools.com
DESCRIPTION
The MakerBot Replicator Z18 5th generation 3D printer has a large build volume of 305(L) x 305(D) x 457(H) mm (42 475 cubic centimetres).
We 3D-scanned 3D-printing evangelist Daniel Norée with a ASUS XTION handheld 3D-scanner. The file was then post-processed in Autodesk MeshMixer and then imported into MakerBot Desktop 3D-printing software, where it was sliced and sent to the Z18 3D printer.
The 3D-printed statue of Daniel Norée measured 457 mm (18 inches) tall and took approx. 49 hours to 3D-print. Support structures were automatically calculated by the MakerBot software which we removed manually with pliers and exacto knife. The total amount of material used was approximately 400 grams of PLA filament.
The time-lapse-base segments of this video where recorded with a Brinno TLC200 PRO Time Lapse Camera. http://brinno.creativetools.se
- published: 13 Jan 2015
- views: 36045
Replicator 2x Unboxing Experience | MakerBot 3D Printer | Setup Testing
- Order: Reorder
- Duration: 34:42
- Updated: 25 May 2013
- views: 135899
3D printers allow users to print 3 dimensional computer files into actual objects, depending on the material being used by the printer. One company leading the ...
3D printers allow users to print 3 dimensional computer files into actual objects, depending on the material being used by the printer. One company leading the way for consumers is MakerBot and their Replicator 2x is in hot demand, most buyers wait 2 months after paying to receive it.
Finally got mine this week and recorded the opening, set up and test printing. It seems as if there is a fine line between only using these 3D printers for gimmicky creations only vs things people can actually use. Much of this depends on how well one knows a 3D modeling program. I have quite a few photography related designs I would like to make to actually use in my photo work, and I am realizing now that I will have to really learn one of many 3D modeling programs to make it happen.
The Replicator 2x is working great, its been going pretty much non-stop since Ive opened it, and most the prints are successful with a few hiccups.
Ill have much more coming over the next couple weeks as I get better with the 3D software. (I am using blender right now).
wn.com/Replicator 2X Unboxing Experience | Makerbot 3D Printer | Setup Testing
3D printers allow users to print 3 dimensional computer files into actual objects, depending on the material being used by the printer. One company leading the way for consumers is MakerBot and their Replicator 2x is in hot demand, most buyers wait 2 months after paying to receive it.
Finally got mine this week and recorded the opening, set up and test printing. It seems as if there is a fine line between only using these 3D printers for gimmicky creations only vs things people can actually use. Much of this depends on how well one knows a 3D modeling program. I have quite a few photography related designs I would like to make to actually use in my photo work, and I am realizing now that I will have to really learn one of many 3D modeling programs to make it happen.
The Replicator 2x is working great, its been going pretty much non-stop since Ive opened it, and most the prints are successful with a few hiccups.
Ill have much more coming over the next couple weeks as I get better with the 3D software. (I am using blender right now).
- published: 25 May 2013
- views: 135899
3D Printing with Makerbot Replicator 2 || Gadgetology
- Order: Reorder
- Duration: 4:28
- Updated: 21 Jan 2013
- views: 189237
Checking out the Makerbot Replicator 2 3D printer and talking about the future of 3D printing.
- published: 21 Jan 2013
- views: 189237
Makerbot Replicator (5th Generation) Set Up
- Order: Reorder
- Duration: 6:44
- Updated: 09 Sep 2014
- views: 9298
Hi Guys!
In this video I am going to show you how to set up your MakerBot 5th Generation 3D printer.
To buy a 5th Generation MakerBot 3D printer click the fol...
Hi Guys!
In this video I am going to show you how to set up your MakerBot 5th Generation 3D printer.
To buy a 5th Generation MakerBot 3D printer click the following link:
http://www.imakr.com/3d-printers/20-makerbot-replicator-5th-generation.html
For more information about our current offers and training go to:
iMakr.com
For free 3D printable objects go to:
MyMiniFactory.com
About the MakerBot Replicator 5th Generation Printer:
HARDWARE
The 5th Generation is powered by a new user-friendly MakerBot Replicator 3D Printing Platform which is App and cloud enabled. USB and Ethernet connectivity ensures a seamless production workflow (Wi-Fi coming soon). There is also a new MakerBot Replicator Smart Extruder, motion controllers, and gantry design. A handy on-board camera plus diagnostics and assisted build plate leveling. Build volume of 7,522 cubic centimeters [456 cubic inches]. 11% larger than the MakerBot Replicator 2 Desktop 3D Printer! Create professional-quality, high-resolution prototypes and complex models with 100 micron resolution layering. Glass build platform.
• Full colour LCD display with on-board utilities to help you set-up and maintain your printer.
• Makerbot Replicator smart extruder - easy to swap or replace, detects filament absence and automatically pauses your print. Sends notifications to your MakerBot desktop and MakerBot mobile apps.
• On baord camera for print monitoring and easy sharing to MakerBot Thingiverse and social networks. Accessible through MakerBot Desktop and MakerBot Mobile apps. Automatically takes reference pictures of final prints and saves them to your cloud storage library.
• Mobile control - free and friendly MakerBot Mobile app (available Spring 2014).
• 4 Ways to connect: USB stick, USB cable, Ethernet cable and Wi-Fi (coming soon).
• Full-featured Software, download for free.
• Assisted leveling with visual feedback to make leveling easier and increase precision for consistent higher-quality printing.
SOFTWARE
MakerWare is the ideal software to drive your MakerBot—and not just because it's pretty and simple to use. Makerbot are always improving their slicing engine, the algorithm that tells your MakerBot what to make and how to make it, so you get stronger, faster, more consistent results.
Use MakerWare to:
Open multiple .stl and .obj files at once and arrange them on the build platform. Scale, move, and rotate individual models or groups of models at once. Set up two-color prints for your MakerBot Replicator or Replicator 2X with new easy dual extrusion integration.
wn.com/Makerbot Replicator (5Th Generation) Set Up
Hi Guys!
In this video I am going to show you how to set up your MakerBot 5th Generation 3D printer.
To buy a 5th Generation MakerBot 3D printer click the following link:
http://www.imakr.com/3d-printers/20-makerbot-replicator-5th-generation.html
For more information about our current offers and training go to:
iMakr.com
For free 3D printable objects go to:
MyMiniFactory.com
About the MakerBot Replicator 5th Generation Printer:
HARDWARE
The 5th Generation is powered by a new user-friendly MakerBot Replicator 3D Printing Platform which is App and cloud enabled. USB and Ethernet connectivity ensures a seamless production workflow (Wi-Fi coming soon). There is also a new MakerBot Replicator Smart Extruder, motion controllers, and gantry design. A handy on-board camera plus diagnostics and assisted build plate leveling. Build volume of 7,522 cubic centimeters [456 cubic inches]. 11% larger than the MakerBot Replicator 2 Desktop 3D Printer! Create professional-quality, high-resolution prototypes and complex models with 100 micron resolution layering. Glass build platform.
• Full colour LCD display with on-board utilities to help you set-up and maintain your printer.
• Makerbot Replicator smart extruder - easy to swap or replace, detects filament absence and automatically pauses your print. Sends notifications to your MakerBot desktop and MakerBot mobile apps.
• On baord camera for print monitoring and easy sharing to MakerBot Thingiverse and social networks. Accessible through MakerBot Desktop and MakerBot Mobile apps. Automatically takes reference pictures of final prints and saves them to your cloud storage library.
• Mobile control - free and friendly MakerBot Mobile app (available Spring 2014).
• 4 Ways to connect: USB stick, USB cable, Ethernet cable and Wi-Fi (coming soon).
• Full-featured Software, download for free.
• Assisted leveling with visual feedback to make leveling easier and increase precision for consistent higher-quality printing.
SOFTWARE
MakerWare is the ideal software to drive your MakerBot—and not just because it's pretty and simple to use. Makerbot are always improving their slicing engine, the algorithm that tells your MakerBot what to make and how to make it, so you get stronger, faster, more consistent results.
Use MakerWare to:
Open multiple .stl and .obj files at once and arrange them on the build platform. Scale, move, and rotate individual models or groups of models at once. Set up two-color prints for your MakerBot Replicator or Replicator 2X with new easy dual extrusion integration.
- published: 09 Sep 2014
- views: 9298
-
Star Trek Style Replicator Serves Up Meals In 30 Seconds indonesian sub
-
CES 2014: MakerBot CEO Bre Pettis Discusses new 3D Printers
In this video I talk with MakerBot CEO about the exciting new Windows 8.1 compatible 3D printers announced at CES 2014. This new lineup includes the Replicator Mini, Replicator, and Replicator Z18. Full story on the ! http://minhthang.name.vn Do not forget to LIKE, SHARE, SUBSCRIBE and feel free to ask me questions or discuss with everyone :] -
robot opzioni binarie - replicator copy signals - segnali opzioni binarie gratis e automatico
Sistema Di Trading Opzioni Binarie - http://goo.gl/JMGnJE -
Direwolf20 Singleplay 24 How To Make Iridium With Mass Fab and Replicator
twitch.tv/brinkthegamer ftb direwolf20 1.6.4 lets play Finally, the pinnacle of the most valulable commodity in Minecraft, even more valuable than the nether star, . Hey everybody! Here's a new series I'm thinking of starting based on the Direwolf20 1.6.4 Feed the Beast Mod Pack. In this episode, we work on creating Iridium . The Direwolf20 Pack is a modpack for Minecraft 1.6.4. It was created in cooperation with Feed The Beast for and by Direwolf20, a popular YouTube personality . Twitter: Livestream link: Primus SMP Members: BlizzardPenguin - Youtube: . -
Godzilla: Save the Earth - Replicator
Another one of my challenges from Godzilla: Save the Earth. I must destroy the replicator that is cloning Mecha-King Ghidorah. -
TURBOCHARGER USING PLA REPLICATOR-MINI PROJECT
Turbocharger are centrifugal compressor driven by an exhaust gas turbine and employed in engines to boost the charge air pressure. The main objective of this project is to do a working prototype of turbocharger using PLA replicator. Increase the compressed air will be as our output. Turbo machinery design and analysis software predicts the interactions of a working fluid (air) with its geometrical surroundings and operational environment.In future,WE integrate the turbocharger and supercharger by means of electric motor and the TURBOLAG can be reduced due to this integration method. -
-
Uppercut's MakerBot Replicator 2
Live stream of what is being printed -
Lenovo 433610W ThinkPad Port Replicator Series 3 (Compatible With Select Lenovo Laptop Models)
Lenovo 433610W ThinkPad Port Replicator Series 3 (Compatible With Select Lenovo Laptop Models) CLICK HERE TO GET IT : http://famz.us/x57q4 ___________________________________________________________________ COMPATIBLE with the following Lenovo Models: L412, L512, L420, L430, L520, L530, T400s, T410, T410i, T410s, T410si, T420, T420s, T430, T430x, T510, T510i, X220, X230. Also compatible with the DualCore models: T520 and T530. -
Suspicion (in the style of Elvis Presley) cover by replicator
Red Karaoke singer replicator sings Suspicionin the style of in the style of Elvis Presley Visit replicator profile with more recordings at: http://www.redkaraoke.com/profile/replicator This video was recorded with Red Karaoke apps. Download Red Karaoke app now for free: http://www.redkaraoke.com/rkapp Do you love singing? Record your own cover videos easily, singing online with thousands of songs, and get fans in the largest social singing network. More information on: http://www.redkaraoke.com Facebook: https://www.facebook.com/redkaraokecom Twitter: https://twitter.com/redkaraoke
Star Trek Style Replicator Serves Up Meals In 30 Seconds indonesian sub
- Order: Reorder
- Duration: 2:14
- Updated: 08 Jun 2016
- views: 0
- published: 08 Jun 2016
- views: 0
CES 2014: MakerBot CEO Bre Pettis Discusses new 3D Printers
- Order: Reorder
- Duration: 7:31
- Updated: 08 Jun 2016
- views: 3
In this video I talk with MakerBot CEO about the exciting new Windows 8.1 compatible 3D printers announced at CES 2014. This new lineup includes the Replicator ...
In this video I talk with MakerBot CEO about the exciting new Windows 8.1 compatible 3D printers announced at CES 2014. This new lineup includes the Replicator Mini, Replicator, and Replicator Z18.
Full story on the !
http://minhthang.name.vn
Do not forget to
LIKE, SHARE, SUBSCRIBE
and feel free to ask me questions or discuss with everyone :]
wn.com/Ces 2014 Makerbot Ceo Bre Pettis Discusses New 3D Printers
In this video I talk with MakerBot CEO about the exciting new Windows 8.1 compatible 3D printers announced at CES 2014. This new lineup includes the Replicator Mini, Replicator, and Replicator Z18.
Full story on the !
http://minhthang.name.vn
Do not forget to
LIKE, SHARE, SUBSCRIBE
and feel free to ask me questions or discuss with everyone :]
- published: 08 Jun 2016
- views: 3
robot opzioni binarie - replicator copy signals - segnali opzioni binarie gratis e automatico
- Order: Reorder
- Duration: 2:37
- Updated: 07 Jun 2016
- views: 0
Sistema Di Trading Opzioni Binarie - http://goo.gl/JMGnJE
Sistema Di Trading Opzioni Binarie - http://goo.gl/JMGnJE
wn.com/Robot Opzioni Binarie Replicator Copy Signals Segnali Opzioni Binarie Gratis E Automatico
Direwolf20 Singleplay 24 How To Make Iridium With Mass Fab and Replicator
- Order: Reorder
- Duration: 62:38
- Updated: 07 Jun 2016
- views: 0
twitch.tv/brinkthegamer ftb direwolf20 1.6.4 lets play Finally, the pinnacle of the most valulable commodity in Minecraft, even more valuable than the nether st...
twitch.tv/brinkthegamer ftb direwolf20 1.6.4 lets play Finally, the pinnacle of the most valulable commodity in Minecraft, even more valuable than the nether star, .
Hey everybody! Here's a new series I'm thinking of starting based on the Direwolf20 1.6.4 Feed the Beast Mod Pack. In this episode, we work on creating Iridium .
The Direwolf20 Pack is a modpack for Minecraft 1.6.4. It was created in cooperation with Feed The Beast for and by Direwolf20, a popular YouTube personality .
Twitter: Livestream link: Primus SMP Members: BlizzardPenguin - Youtube: .
wn.com/Direwolf20 Singleplay 24 How To Make Iridium With Mass Fab And Replicator
twitch.tv/brinkthegamer ftb direwolf20 1.6.4 lets play Finally, the pinnacle of the most valulable commodity in Minecraft, even more valuable than the nether star, .
Hey everybody! Here's a new series I'm thinking of starting based on the Direwolf20 1.6.4 Feed the Beast Mod Pack. In this episode, we work on creating Iridium .
The Direwolf20 Pack is a modpack for Minecraft 1.6.4. It was created in cooperation with Feed The Beast for and by Direwolf20, a popular YouTube personality .
Twitter: Livestream link: Primus SMP Members: BlizzardPenguin - Youtube: .
- published: 07 Jun 2016
- views: 0
Godzilla: Save the Earth - Replicator
- Order: Reorder
- Duration: 1:56
- Updated: 07 Jun 2016
- views: 6
Another one of my challenges from Godzilla: Save the Earth. I must destroy the replicator that is cloning Mecha-King Ghidorah.
Another one of my challenges from Godzilla: Save the Earth. I must destroy the replicator that is cloning Mecha-King Ghidorah.
wn.com/Godzilla Save The Earth Replicator
Another one of my challenges from Godzilla: Save the Earth. I must destroy the replicator that is cloning Mecha-King Ghidorah.
- published: 07 Jun 2016
- views: 6
TURBOCHARGER USING PLA REPLICATOR-MINI PROJECT
- Order: Reorder
- Duration: 0:35
- Updated: 07 Jun 2016
- views: 4
Turbocharger are centrifugal compressor driven by an exhaust gas turbine and employed in engines to boost the charge air pressure.
The main objective of this p...
Turbocharger are centrifugal compressor driven by an exhaust gas turbine and employed in engines to boost the charge air pressure.
The main objective of this project is to do a working prototype of turbocharger using PLA replicator. Increase the compressed air will be as our output. Turbo machinery design and analysis software predicts the interactions of a working fluid (air) with its geometrical surroundings and operational environment.In future,WE integrate the turbocharger and supercharger by means of electric motor and the TURBOLAG can be reduced due to this integration method.
wn.com/Turbocharger Using Pla Replicator Mini Project
Turbocharger are centrifugal compressor driven by an exhaust gas turbine and employed in engines to boost the charge air pressure.
The main objective of this project is to do a working prototype of turbocharger using PLA replicator. Increase the compressed air will be as our output. Turbo machinery design and analysis software predicts the interactions of a working fluid (air) with its geometrical surroundings and operational environment.In future,WE integrate the turbocharger and supercharger by means of electric motor and the TURBOLAG can be reduced due to this integration method.
- published: 07 Jun 2016
- views: 4
Landmark Beginner's Corner - 2 Materials and the Replicator
- Order: Reorder
- Duration: 2:38
- Updated: 07 Jun 2016
- views: 21
In order to build in Landmark you must gather the resources in the world and refine them at the replicator
twitch.tv/verlin_eql
twitter.com/verlin_EQL
youtube...
In order to build in Landmark you must gather the resources in the world and refine them at the replicator
twitch.tv/verlin_eql
twitter.com/verlin_EQL
youtube.com/verlineql
www.LandmarktheGame.com
Music: bensound.com
wn.com/Landmark Beginner's Corner 2 Materials And The Replicator
Uppercut's MakerBot Replicator 2
- Order: Reorder
- Duration: 0:56
- Updated: 06 Jun 2016
- views: 0
Live stream of what is being printed
Live stream of what is being printed
wn.com/Uppercut's Makerbot Replicator 2
Lenovo 433610W ThinkPad Port Replicator Series 3 (Compatible With Select Lenovo Laptop Models)
- Order: Reorder
- Duration: 1:41
- Updated: 05 Jun 2016
- views: 0
Lenovo 433610W ThinkPad Port Replicator Series 3 (Compatible With Select Lenovo Laptop Models)
CLICK HERE TO GET IT : http://famz.us/x57q4 _____________________...
Lenovo 433610W ThinkPad Port Replicator Series 3 (Compatible With Select Lenovo Laptop Models)
CLICK HERE TO GET IT : http://famz.us/x57q4 ___________________________________________________________________ COMPATIBLE with the following Lenovo Models: L412, L512, L420, L430, L520, L530, T400s, T410, T410i, T410s, T410si, T420, T420s, T430, T430x, T510, T510i, X220, X230. Also compatible with the DualCore models: T520 and T530.
wn.com/Lenovo 433610W Thinkpad Port Replicator Series 3 (Compatible With Select Lenovo Laptop Models)
Lenovo 433610W ThinkPad Port Replicator Series 3 (Compatible With Select Lenovo Laptop Models)
CLICK HERE TO GET IT : http://famz.us/x57q4 ___________________________________________________________________ COMPATIBLE with the following Lenovo Models: L412, L512, L420, L430, L520, L530, T400s, T410, T410i, T410s, T410si, T420, T420s, T430, T430x, T510, T510i, X220, X230. Also compatible with the DualCore models: T520 and T530.
- published: 05 Jun 2016
- views: 0
Suspicion (in the style of Elvis Presley) cover by replicator
- Order: Reorder
- Duration: 2:45
- Updated: 04 Jun 2016
- views: 2
Red Karaoke singer replicator sings Suspicionin the style of in the style of Elvis Presley
Visit replicator profile with more recordings at: http://www.redkarao...
Red Karaoke singer replicator sings Suspicionin the style of in the style of Elvis Presley
Visit replicator profile with more recordings at: http://www.redkaraoke.com/profile/replicator
This video was recorded with Red Karaoke apps. Download Red Karaoke app now for free: http://www.redkaraoke.com/rkapp
Do you love singing? Record your own cover videos easily, singing online with thousands of songs, and get fans in the largest social singing network.
More information on:
http://www.redkaraoke.com
Facebook: https://www.facebook.com/redkaraokecom
Twitter: https://twitter.com/redkaraoke
wn.com/Suspicion (In The Style Of Elvis Presley) Cover By Replicator
Red Karaoke singer replicator sings Suspicionin the style of in the style of Elvis Presley
Visit replicator profile with more recordings at: http://www.redkaraoke.com/profile/replicator
This video was recorded with Red Karaoke apps. Download Red Karaoke app now for free: http://www.redkaraoke.com/rkapp
Do you love singing? Record your own cover videos easily, singing online with thousands of songs, and get fans in the largest social singing network.
More information on:
http://www.redkaraoke.com
Facebook: https://www.facebook.com/redkaraokecom
Twitter: https://twitter.com/redkaraoke
- published: 04 Jun 2016
- views: 2
-
MakerBot Replicator Mini Compact 3D Printer Review
This is my unboxing and full review of the MakerBot Replicator Mini Compact 3D Printer. For more information about the MakerBot Replicator Mini check out the MakerBot website here at http://store.makerbot.com/replicator-mini Here's the Spool Holder for full size spools of filament: http://www.thingiverse.com/thing:751182 Here's the GoPro Mount: http://www.thingiverse.com/thing:718011 Thanks for watching and please Like, Share, and Subscribe! -
Minecraft Mods FTB Infinity - REPLICATOR [E65] (HermitCraft Modded Server)
Want more FTB Infinity? Hit that LIKE button, peeps! ♥ Minecraft Mods FTB Infinity HermitCraft Modded Server is a white-list invite only server. The IP address is not available. ------------------- Now that we have all of the UU-Matter, it's time to put it to work! Let's check out what we're able to replicate and see about making the UU-Matter world a little more cost-friendly! ------------------- ► PLAYLIST https://www.youtube.com/playlist?list=PLriprjos26ptzROSrRxUdegN-wwNESpfe ► CUBEDHOST SERVERS 20% OFF HermitCraft is hosted through CubedHost! Use this link for 20% off at checkout: http://cubedhost.com/hermitcraft ► BECOME A PATREON ♥ https://patreon.com/hypnotizd ► LINKS http://twitter.com/hypnotizd_ http://twitch.tv/hypnotizd_ http://hermitcraft.com ► MODPACK/MAP INFORMATION F... -
Minecraft Mods FTB Infinity - MAX SPEED REPLICATOR !!! [E67] (HermitCraft Modded Server)
Want more FTB Infinity? Hit that LIKE button, peeps! ♥ Minecraft Mods FTB Infinity HermitCraft Modded Server is a white-list invite only server. The IP address is not available. ------------------- We now have a lot of EU power generation going on! Let's figure out how to route that power around and then see how fast we can make a replicator replicate! :-) ------------------- ► PLAYLIST https://www.youtube.com/playlist?list=PLriprjos26ptzROSrRxUdegN-wwNESpfe ► CUBEDHOST SERVERS 20% OFF HermitCraft is hosted through CubedHost! Use this link for 20% off at checkout: http://cubedhost.com/hermitcraft ► BECOME A PATREON ♥ https://patreon.com/hypnotizd ► LINKS http://twitter.com/hypnotizd_ http://twitch.tv/hypnotizd_ http://hermitcraft.com ► MODPACK/MAP INFORMATION FTB Infinity v1.5.1 See... -
-
Getting Started with the FlashForge Creator X: Replicator G on Windows (3D Universe)
3D Universe is pleased to present this comprehensive multi-part getting started tutorial for the FlashForge Creator X 3D printer. For the entire playlist of videos, visit: https://www.youtube.com/playlist?list=PLsaNLYwo4AA4XRvJCjTXiLYf487qGhIqZ In this video, we show you how to install and configure Replicator G for Windows for single and dual-extrusion prints. To buy a FlashForge Creator X, please visit: http://shop3duniverse.com/collections/3d-printers/products/flashforge-creator-x For more information, please visit: http://3duniverse.org Intro and Closing Music: http://www.purple-planet.com -
EEVblog #318 - Makerbot Replicator 3D Printer Unboxing & Review
Forum Topic: http://www.eevblog.com/forum/blog-specific/eevblog-318-makerbot-replicator-3d-printer-unboxing-review/ Dave checks out the new Makerbot Replicator 3D printer and compares it to the old Thing-O-Matic. EEVblog Main Web Site: http://www.eevblog.com EEVblog Amazon Store: http://astore.amazon.com/eevblogstore-20 Donations: http://www.eevblog.com/donations/ Projects: http://www.eevblog.com/projects/ Electronics Info Wiki: http://www.eevblog.com/wiki/ -
Thaumic Replicator and Boots of the Comet on FTB Infinity!
Modded Minecraft has alliteration. Do you? http://hermitcraft.com -
ГаджеТы: достаем из коробки 3D принтер MakerBot Replicator 2 Desktop 3D Printer
УЧАСТВУЙ В АКЦИИ! Выиграй Nokia Lumia 625 - http://youtu.be/VVQCq7Dxwhs Вот и мне в ручки попалось "чудо современных" технологий под названием "3D принтер", модели MakerBot Replicator 2 Desktop 3D Printer. Как следует из названия - "настольный" ;) Не забываем подписываться на мой канал iWalker2000 - просто кликните сюда - http://bit.ly/iwalker2000_subs Как выглядит собственно принтер, что идет в комплекте, как это работает и что принтер реально может - смотрите в этом видео ;) Сразу скажу, что видео получилось длинным ввиду того, что пока я его распаковал, пока подключил, укомплектовал расходниками, пока откалибровал - вот время и прошло... Плюс - даже самые простые (на мой взгляд) вещи от печатает около 20-30 минут... Я, конечно, лишнее вырезал, но все же ;) И о самой идее 3D печ... -
FTB Infinity Expert - Ep. 40 - Replicator & Christmas
X-Mas Game Giveaway - https://gleam.io/CSegE/christmas-giveaway Thank you for all the love and support all year and I wish you all nothing but the best! Welcome to FTB Infinity Evolved on Expert Mode! I've been waiting about a month for this pack to finally get released and here it is! I was looking for a more challenging en-devour and I think we have found it! Join us as we progress through Tech and Magic Mods and build amazing and awesome bases and cool unique designs. Infinity Evolved adds game modes! Two modes are currently included; 'normal' and 'expert'. New and existing worlds are automatically in 'normal' mode, to switch to the all-new game mode type the following command (without quotes): "/ftb_mode set expert" At any time you can return to 'normal' to typing the command...
MakerBot Replicator Mini Compact 3D Printer Review
- Order: Reorder
- Duration: 41:02
- Updated: 07 Mar 2016
- views: 1909
This is my unboxing and full review of the MakerBot Replicator Mini Compact 3D Printer. For more information about the MakerBot Replicator Mini check out the Ma...
This is my unboxing and full review of the MakerBot Replicator Mini Compact 3D Printer. For more information about the MakerBot Replicator Mini check out the MakerBot website here at http://store.makerbot.com/replicator-mini
Here's the Spool Holder for full size spools of filament:
http://www.thingiverse.com/thing:751182
Here's the GoPro Mount:
http://www.thingiverse.com/thing:718011
Thanks for watching and please Like, Share, and Subscribe!
wn.com/Makerbot Replicator Mini Compact 3D Printer Review
This is my unboxing and full review of the MakerBot Replicator Mini Compact 3D Printer. For more information about the MakerBot Replicator Mini check out the MakerBot website here at http://store.makerbot.com/replicator-mini
Here's the Spool Holder for full size spools of filament:
http://www.thingiverse.com/thing:751182
Here's the GoPro Mount:
http://www.thingiverse.com/thing:718011
Thanks for watching and please Like, Share, and Subscribe!
- published: 07 Mar 2016
- views: 1909
Minecraft Mods FTB Infinity - REPLICATOR [E65] (HermitCraft Modded Server)
- Order: Reorder
- Duration: 29:12
- Updated: 07 Jun 2015
- views: 35282
Want more FTB Infinity? Hit that LIKE button, peeps! ♥
Minecraft Mods FTB Infinity HermitCraft Modded Server is a white-list invite only server. The IP address...
Want more FTB Infinity? Hit that LIKE button, peeps! ♥
Minecraft Mods FTB Infinity HermitCraft Modded Server is a white-list invite only server. The IP address is not available.
-------------------
Now that we have all of the UU-Matter, it's time to put it to work! Let's check out what we're able to replicate and see about making the UU-Matter world a little more cost-friendly!
-------------------
► PLAYLIST
https://www.youtube.com/playlist?list=PLriprjos26ptzROSrRxUdegN-wwNESpfe
► CUBEDHOST SERVERS 20% OFF
HermitCraft is hosted through CubedHost! Use this link for 20% off at checkout: http://cubedhost.com/hermitcraft
► BECOME A PATREON ♥
https://patreon.com/hypnotizd
► LINKS
http://twitter.com/hypnotizd_
http://twitch.tv/hypnotizd_
http://hermitcraft.com
► MODPACK/MAP INFORMATION
FTB Infinity v1.5.1
Seed: -5982705374213673881 (BIOMESOP)
wn.com/Minecraft Mods Ftb Infinity Replicator E65 (Hermitcraft Modded Server)
Want more FTB Infinity? Hit that LIKE button, peeps! ♥
Minecraft Mods FTB Infinity HermitCraft Modded Server is a white-list invite only server. The IP address is not available.
-------------------
Now that we have all of the UU-Matter, it's time to put it to work! Let's check out what we're able to replicate and see about making the UU-Matter world a little more cost-friendly!
-------------------
► PLAYLIST
https://www.youtube.com/playlist?list=PLriprjos26ptzROSrRxUdegN-wwNESpfe
► CUBEDHOST SERVERS 20% OFF
HermitCraft is hosted through CubedHost! Use this link for 20% off at checkout: http://cubedhost.com/hermitcraft
► BECOME A PATREON ♥
https://patreon.com/hypnotizd
► LINKS
http://twitter.com/hypnotizd_
http://twitch.tv/hypnotizd_
http://hermitcraft.com
► MODPACK/MAP INFORMATION
FTB Infinity v1.5.1
Seed: -5982705374213673881 (BIOMESOP)
- published: 07 Jun 2015
- views: 35282
Minecraft Mods FTB Infinity - MAX SPEED REPLICATOR !!! [E67] (HermitCraft Modded Server)
- Order: Reorder
- Duration: 33:23
- Updated: 13 Jun 2015
- views: 43884
Want more FTB Infinity? Hit that LIKE button, peeps! ♥
Minecraft Mods FTB Infinity HermitCraft Modded Server is a white-list invite only server. The IP address...
Want more FTB Infinity? Hit that LIKE button, peeps! ♥
Minecraft Mods FTB Infinity HermitCraft Modded Server is a white-list invite only server. The IP address is not available.
-------------------
We now have a lot of EU power generation going on! Let's figure out how to route that power around and then see how fast we can make a replicator replicate! :-)
-------------------
► PLAYLIST
https://www.youtube.com/playlist?list=PLriprjos26ptzROSrRxUdegN-wwNESpfe
► CUBEDHOST SERVERS 20% OFF
HermitCraft is hosted through CubedHost! Use this link for 20% off at checkout: http://cubedhost.com/hermitcraft
► BECOME A PATREON ♥
https://patreon.com/hypnotizd
► LINKS
http://twitter.com/hypnotizd_
http://twitch.tv/hypnotizd_
http://hermitcraft.com
► MODPACK/MAP INFORMATION
FTB Infinity v1.5.1
Seed: -5982705374213673881 (BIOMESOP)
wn.com/Minecraft Mods Ftb Infinity Max Speed Replicator E67 (Hermitcraft Modded Server)
Want more FTB Infinity? Hit that LIKE button, peeps! ♥
Minecraft Mods FTB Infinity HermitCraft Modded Server is a white-list invite only server. The IP address is not available.
-------------------
We now have a lot of EU power generation going on! Let's figure out how to route that power around and then see how fast we can make a replicator replicate! :-)
-------------------
► PLAYLIST
https://www.youtube.com/playlist?list=PLriprjos26ptzROSrRxUdegN-wwNESpfe
► CUBEDHOST SERVERS 20% OFF
HermitCraft is hosted through CubedHost! Use this link for 20% off at checkout: http://cubedhost.com/hermitcraft
► BECOME A PATREON ♥
https://patreon.com/hypnotizd
► LINKS
http://twitter.com/hypnotizd_
http://twitch.tv/hypnotizd_
http://hermitcraft.com
► MODPACK/MAP INFORMATION
FTB Infinity v1.5.1
Seed: -5982705374213673881 (BIOMESOP)
- published: 13 Jun 2015
- views: 43884
Element 3D Replicator Options
- Order: Reorder
- Duration: 24:33
- Updated: 22 Jul 2012
- views: 94385
Check out the advanced replicator options for Element 3D:
https://www.videocopilot.net/products/element/
Visit Video Copilot:
http://www.videocopilot.net
Foll...
Check out the advanced replicator options for Element 3D:
https://www.videocopilot.net/products/element/
Visit Video Copilot:
http://www.videocopilot.net
Follow on Twitter:
http://twitter.com/videocopilot
wn.com/Element 3D Replicator Options
Getting Started with the FlashForge Creator X: Replicator G on Windows (3D Universe)
- Order: Reorder
- Duration: 25:31
- Updated: 12 Jul 2014
- views: 25372
3D Universe is pleased to present this comprehensive multi-part getting started tutorial for the FlashForge Creator X 3D printer.
For the entire playlist of vi...
3D Universe is pleased to present this comprehensive multi-part getting started tutorial for the FlashForge Creator X 3D printer.
For the entire playlist of videos, visit:
https://www.youtube.com/playlist?list=PLsaNLYwo4AA4XRvJCjTXiLYf487qGhIqZ
In this video, we show you how to install and configure Replicator G for Windows for single and dual-extrusion prints.
To buy a FlashForge Creator X, please visit:
http://shop3duniverse.com/collections/3d-printers/products/flashforge-creator-x
For more information, please visit:
http://3duniverse.org
Intro and Closing Music:
http://www.purple-planet.com
wn.com/Getting Started With The Flashforge Creator X Replicator G On Windows (3D Universe)
3D Universe is pleased to present this comprehensive multi-part getting started tutorial for the FlashForge Creator X 3D printer.
For the entire playlist of videos, visit:
https://www.youtube.com/playlist?list=PLsaNLYwo4AA4XRvJCjTXiLYf487qGhIqZ
In this video, we show you how to install and configure Replicator G for Windows for single and dual-extrusion prints.
To buy a FlashForge Creator X, please visit:
http://shop3duniverse.com/collections/3d-printers/products/flashforge-creator-x
For more information, please visit:
http://3duniverse.org
Intro and Closing Music:
http://www.purple-planet.com
- published: 12 Jul 2014
- views: 25372
EEVblog #318 - Makerbot Replicator 3D Printer Unboxing & Review
- Order: Reorder
- Duration: 52:48
- Updated: 21 Jul 2012
- views: 205195
Forum Topic: http://www.eevblog.com/forum/blog-specific/eevblog-318-makerbot-replicator-3d-printer-unboxing-review/
Dave checks out the new Makerbot Replicator...
Forum Topic: http://www.eevblog.com/forum/blog-specific/eevblog-318-makerbot-replicator-3d-printer-unboxing-review/
Dave checks out the new Makerbot Replicator 3D printer and compares it to the old Thing-O-Matic.
EEVblog Main Web Site:
http://www.eevblog.com
EEVblog Amazon Store:
http://astore.amazon.com/eevblogstore-20
Donations:
http://www.eevblog.com/donations/
Projects:
http://www.eevblog.com/projects/
Electronics Info Wiki:
http://www.eevblog.com/wiki/
wn.com/Eevblog 318 Makerbot Replicator 3D Printer Unboxing Review
Forum Topic: http://www.eevblog.com/forum/blog-specific/eevblog-318-makerbot-replicator-3d-printer-unboxing-review/
Dave checks out the new Makerbot Replicator 3D printer and compares it to the old Thing-O-Matic.
EEVblog Main Web Site:
http://www.eevblog.com
EEVblog Amazon Store:
http://astore.amazon.com/eevblogstore-20
Donations:
http://www.eevblog.com/donations/
Projects:
http://www.eevblog.com/projects/
Electronics Info Wiki:
http://www.eevblog.com/wiki/
- published: 21 Jul 2012
- views: 205195
Thaumic Replicator and Boots of the Comet on FTB Infinity!
- Order: Reorder
- Duration: 20:21
- Updated: 09 Mar 2015
- views: 4736
Modded Minecraft has alliteration. Do you?
http://hermitcraft.com
Modded Minecraft has alliteration. Do you?
http://hermitcraft.com
wn.com/Thaumic Replicator And Boots Of The Comet On Ftb Infinity
Modded Minecraft has alliteration. Do you?
http://hermitcraft.com
- published: 09 Mar 2015
- views: 4736
ГаджеТы: достаем из коробки 3D принтер MakerBot Replicator 2 Desktop 3D Printer
- Order: Reorder
- Duration: 45:23
- Updated: 28 Oct 2013
- views: 51014
УЧАСТВУЙ В АКЦИИ! Выиграй Nokia Lumia 625 - http://youtu.be/VVQCq7Dxwhs
Вот и мне в ручки попалось "чудо современных" технологий под названием "3D принтер", м...
УЧАСТВУЙ В АКЦИИ! Выиграй Nokia Lumia 625 - http://youtu.be/VVQCq7Dxwhs
Вот и мне в ручки попалось "чудо современных" технологий под названием "3D принтер", модели MakerBot Replicator 2 Desktop 3D Printer. Как следует из названия - "настольный" ;)
Не забываем подписываться на мой канал iWalker2000 - просто кликните сюда - http://bit.ly/iwalker2000_subs
Как выглядит собственно принтер, что идет в комплекте, как это работает и что принтер реально может - смотрите в этом видео ;)
Сразу скажу, что видео получилось длинным ввиду того, что пока я его распаковал, пока подключил, укомплектовал расходниками, пока откалибровал - вот время и прошло... Плюс - даже самые простые (на мой взгляд) вещи от печатает около 20-30 минут... Я, конечно, лишнее вырезал, но все же ;)
И о самой идее 3D печати - это, конечно, перспективно, но сейчас можно больше говорить о том, что такой инструмент будет полезен для тех, кто использует компьютеры для моделирования и создания чего-то материального - возможность сразу пощупать то, что ты нарисовал на экране - это самое то в 3В печати в дизайне и моделировании. Для остальных 3D печать - это, скорее, дорогая игрушка печатать безделушки ;)
Лично для меня такой девайс - это расширение возможностей по созданию своих макетов железных дорог ( https://www.youtube.com/playlist?list=PL9665AF22FCDD2BE6 ) пригодился бы - я бы печатал на нем те же домики, деревья, людей, транспорт, детали ландшафта и даже, может быть - какиие-то вещи типа мостов, переходов, опор для полотна и различную нагрузку в грузовые вагоны (а может, и сами вагоны). Но стоит это все пока дорого для домашнего использования... ;)
Но время покажет - может, чего и напечатаю себе, сниму отдельное видео о дальнейшем использовании этого MakerBot Replicator 2 Desktop 3D Printer, так что продолжение - может и последует... ;)
Не забываем подписываться на мой канал iWalker2000 - просто кликните сюда - http://bit.ly/iwalker2000_subs
И еще видео об интересных гаджетах и девайсах:
* Достаем из коробки Microsoft PixelSense (бывший Surface) - http://youtu.be/RjZcXdyEfE8
* обзор тач-стола Microsoft PixelSense - http://youtu.be/7WaIXQtFz3Q
* обзор оригинального домашнего гаджета - светильника Philips LivingColors Aura - http://youtu.be/WOTsaYkYmOc
* отличный китайский гаджет для подсветки воды - http://youtu.be/SRDlA0ihqqU
* обзоры/репортажи с выставки пользовательской электроники IFA Berlin 2013, где много интересных гаджетов - https://www.youtube.com/playlist?list=PLB5YmwQw0Jl-ZfxbHZ2dQH05MfjnpnAAv
Также, по просьбам подписчиков - меня найти можно (добавляйтесь в друзья и подписчики):
* в Facebook - http://www.facebook.com/igor.shastitko ;
* в LinkedID - http://www.linkedin.com/in/iwalker2000 ;
* в Twitter - http://twitter.com/iwalker2000 ;
* подробно обо мне на моем персональном техническом блоге - http://iwalker2000.wordpress.com/about/ .
wn.com/Гаджеты Достаем Из Коробки 3D Принтер Makerbot Replicator 2 Desktop 3D Printer
УЧАСТВУЙ В АКЦИИ! Выиграй Nokia Lumia 625 - http://youtu.be/VVQCq7Dxwhs
Вот и мне в ручки попалось "чудо современных" технологий под названием "3D принтер", модели MakerBot Replicator 2 Desktop 3D Printer. Как следует из названия - "настольный" ;)
Не забываем подписываться на мой канал iWalker2000 - просто кликните сюда - http://bit.ly/iwalker2000_subs
Как выглядит собственно принтер, что идет в комплекте, как это работает и что принтер реально может - смотрите в этом видео ;)
Сразу скажу, что видео получилось длинным ввиду того, что пока я его распаковал, пока подключил, укомплектовал расходниками, пока откалибровал - вот время и прошло... Плюс - даже самые простые (на мой взгляд) вещи от печатает около 20-30 минут... Я, конечно, лишнее вырезал, но все же ;)
И о самой идее 3D печати - это, конечно, перспективно, но сейчас можно больше говорить о том, что такой инструмент будет полезен для тех, кто использует компьютеры для моделирования и создания чего-то материального - возможность сразу пощупать то, что ты нарисовал на экране - это самое то в 3В печати в дизайне и моделировании. Для остальных 3D печать - это, скорее, дорогая игрушка печатать безделушки ;)
Лично для меня такой девайс - это расширение возможностей по созданию своих макетов железных дорог ( https://www.youtube.com/playlist?list=PL9665AF22FCDD2BE6 ) пригодился бы - я бы печатал на нем те же домики, деревья, людей, транспорт, детали ландшафта и даже, может быть - какиие-то вещи типа мостов, переходов, опор для полотна и различную нагрузку в грузовые вагоны (а может, и сами вагоны). Но стоит это все пока дорого для домашнего использования... ;)
Но время покажет - может, чего и напечатаю себе, сниму отдельное видео о дальнейшем использовании этого MakerBot Replicator 2 Desktop 3D Printer, так что продолжение - может и последует... ;)
Не забываем подписываться на мой канал iWalker2000 - просто кликните сюда - http://bit.ly/iwalker2000_subs
И еще видео об интересных гаджетах и девайсах:
* Достаем из коробки Microsoft PixelSense (бывший Surface) - http://youtu.be/RjZcXdyEfE8
* обзор тач-стола Microsoft PixelSense - http://youtu.be/7WaIXQtFz3Q
* обзор оригинального домашнего гаджета - светильника Philips LivingColors Aura - http://youtu.be/WOTsaYkYmOc
* отличный китайский гаджет для подсветки воды - http://youtu.be/SRDlA0ihqqU
* обзоры/репортажи с выставки пользовательской электроники IFA Berlin 2013, где много интересных гаджетов - https://www.youtube.com/playlist?list=PLB5YmwQw0Jl-ZfxbHZ2dQH05MfjnpnAAv
Также, по просьбам подписчиков - меня найти можно (добавляйтесь в друзья и подписчики):
* в Facebook - http://www.facebook.com/igor.shastitko ;
* в LinkedID - http://www.linkedin.com/in/iwalker2000 ;
* в Twitter - http://twitter.com/iwalker2000 ;
* подробно обо мне на моем персональном техническом блоге - http://iwalker2000.wordpress.com/about/ .
- published: 28 Oct 2013
- views: 51014
FTB Infinity Expert - Ep. 40 - Replicator & Christmas
- Order: Reorder
- Duration: 27:04
- Updated: 25 Dec 2015
- views: 4794
X-Mas Game Giveaway - https://gleam.io/CSegE/christmas-giveaway
Thank you for all the love and support all year and I wish you all nothing but the best!
Welco...
X-Mas Game Giveaway - https://gleam.io/CSegE/christmas-giveaway
Thank you for all the love and support all year and I wish you all nothing but the best!
Welcome to FTB Infinity Evolved on Expert Mode! I've been waiting about a month for this pack to finally get released and here it is! I was looking for a more challenging en-devour and I think we have found it!
Join us as we progress through Tech and Magic Mods and build amazing and awesome bases and cool unique designs.
Infinity Evolved adds game modes! Two modes are currently included; 'normal' and 'expert'. New and existing worlds are automatically in 'normal' mode, to switch to the all-new game mode type the following command (without quotes): "/ftb_mode set expert" At any time you can return to 'normal' to typing the command: "/ftb_mode set normal" These same commands can be executed by server ops either in game or from console. Players joining a server will be switched to the server's game mode upon login automatically. World resets are not required with the update to 2.0.0 but highly suggested if you are planning to play 'expert' mode due to the massive amount of progression changes.
Make sure you leave a like and/or subscribe for more content and to support the channel.
Follow Kryllyk at www.twitch.tv/kryllyk
Follow Kryllyk at www.twitter.com/kryllyk
wn.com/Ftb Infinity Expert Ep. 40 Replicator Christmas
X-Mas Game Giveaway - https://gleam.io/CSegE/christmas-giveaway
Thank you for all the love and support all year and I wish you all nothing but the best!
Welcome to FTB Infinity Evolved on Expert Mode! I've been waiting about a month for this pack to finally get released and here it is! I was looking for a more challenging en-devour and I think we have found it!
Join us as we progress through Tech and Magic Mods and build amazing and awesome bases and cool unique designs.
Infinity Evolved adds game modes! Two modes are currently included; 'normal' and 'expert'. New and existing worlds are automatically in 'normal' mode, to switch to the all-new game mode type the following command (without quotes): "/ftb_mode set expert" At any time you can return to 'normal' to typing the command: "/ftb_mode set normal" These same commands can be executed by server ops either in game or from console. Players joining a server will be switched to the server's game mode upon login automatically. World resets are not required with the update to 2.0.0 but highly suggested if you are planning to play 'expert' mode due to the massive amount of progression changes.
Make sure you leave a like and/or subscribe for more content and to support the channel.
Follow Kryllyk at www.twitch.tv/kryllyk
Follow Kryllyk at www.twitter.com/kryllyk
- published: 25 Dec 2015
- views: 4794
close fullscreen
- Playlist
- Chat
close fullscreen
- Playlist
- Chat
6:39
T-Rex Replicator Tape Echo Demo
Reviewed in Guitarist 404
Gear demos playlist: http://goo.gl/30cAf Subscribe for more from...
published: 03 Feb 2016
T-Rex Replicator Tape Echo Demo
T-Rex Replicator Tape Echo Demo
- Report rights infringement
- published: 03 Feb 2016
- views: 3408
8:22
T-Rex Replicator Analog Tape Echo Pedal Demo
Lars Dahl-Jorgensen, founder of T-Rex Engineering, stopped by the shop to show off their h...
published: 05 Dec 2015
T-Rex Replicator Analog Tape Echo Pedal Demo
T-Rex Replicator Analog Tape Echo Pedal Demo
- Report rights infringement
- published: 05 Dec 2015
- views: 96009
7:34
FIRST LOOK: Makerbot Replicator 5TH GEN Desktop 3D Printer!!
To read more: http://www.kayrus.com/legos/replicatorFirstLook
I just got my hands on the ...
published: 19 Mar 2014
FIRST LOOK: Makerbot Replicator 5TH GEN Desktop 3D Printer!!
FIRST LOOK: Makerbot Replicator 5TH GEN Desktop 3D Printer!!
- Report rights infringement
- published: 19 Mar 2014
- views: 125456
1:47
Star Trek Replicator
Star Trek Replicator From show Star Trek Enterprise season 2 episode 4
published: 17 Jun 2014
Star Trek Replicator
Star Trek Replicator
- Report rights infringement
- published: 17 Jun 2014
- views: 18731
3:02
MakerBot Replicator, Mini, Z18 - Erster Praxis-Test - CES 2014 | CHIP
MakerBot hat auf der CES 2014 sein komplettes 3D-Drucker-Ökosystem vorgestellt, darunter d...
published: 14 Jan 2014
MakerBot Replicator, Mini, Z18 - Erster Praxis-Test - CES 2014 | CHIP
MakerBot Replicator, Mini, Z18 - Erster Praxis-Test - CES 2014 | CHIP
- Report rights infringement
- published: 14 Jan 2014
- views: 37135
5:46
T-Rex Replicator Analog Tape Delay Review by Sweetwater
Hey guitarists, check out the T-Rex Replicator analog delay pedal! With a real analog tape...
published: 15 Feb 2016
T-Rex Replicator Analog Tape Delay Review by Sweetwater
T-Rex Replicator Analog Tape Delay Review by Sweetwater
- Report rights infringement
- published: 15 Feb 2016
- views: 2594
2:46
MakerBot Replicator Z18 3D-prints Daniel Norée
For more information visit http://creative-tools.com
DESCRIPTION
The MakerBot Replicator ...
published: 13 Jan 2015
MakerBot Replicator Z18 3D-prints Daniel Norée
MakerBot Replicator Z18 3D-prints Daniel Norée
- Report rights infringement
- published: 13 Jan 2015
- views: 36045
34:42
Replicator 2x Unboxing Experience | MakerBot 3D Printer | Setup Testing
3D printers allow users to print 3 dimensional computer files into actual objects, dependi...
published: 25 May 2013
Replicator 2x Unboxing Experience | MakerBot 3D Printer | Setup Testing
Replicator 2x Unboxing Experience | MakerBot 3D Printer | Setup Testing
- Report rights infringement
- published: 25 May 2013
- views: 135899
4:28
3D Printing with Makerbot Replicator 2 || Gadgetology
Checking out the Makerbot Replicator 2 3D printer and talking about the future of 3D print...
published: 21 Jan 2013
3D Printing with Makerbot Replicator 2 || Gadgetology
3D Printing with Makerbot Replicator 2 || Gadgetology
- Report rights infringement
- published: 21 Jan 2013
- views: 189237
6:44
Makerbot Replicator (5th Generation) Set Up
Hi Guys!
In this video I am going to show you how to set up your MakerBot 5th Generation ...
published: 09 Sep 2014
Makerbot Replicator (5th Generation) Set Up
Makerbot Replicator (5th Generation) Set Up
- Report rights infringement
- published: 09 Sep 2014
- views: 9298
close fullscreen
- Playlist
- Chat
2:14
Star Trek Style Replicator Serves Up Meals In 30 Seconds indonesian sub
published: 08 Jun 2016
Star Trek Style Replicator Serves Up Meals In 30 Seconds indonesian sub
Star Trek Style Replicator Serves Up Meals In 30 Seconds indonesian sub
- Report rights infringement
- published: 08 Jun 2016
- views: 0
7:31
CES 2014: MakerBot CEO Bre Pettis Discusses new 3D Printers
In this video I talk with MakerBot CEO about the exciting new Windows 8.1 compatible 3D pr...
published: 08 Jun 2016
CES 2014: MakerBot CEO Bre Pettis Discusses new 3D Printers
CES 2014: MakerBot CEO Bre Pettis Discusses new 3D Printers
- Report rights infringement
- published: 08 Jun 2016
- views: 3
2:37
robot opzioni binarie - replicator copy signals - segnali opzioni binarie gratis e automatico
Sistema Di Trading Opzioni Binarie - http://goo.gl/JMGnJE
published: 07 Jun 2016
robot opzioni binarie - replicator copy signals - segnali opzioni binarie gratis e automatico
robot opzioni binarie - replicator copy signals - segnali opzioni binarie gratis e automatico
- Report rights infringement
- published: 07 Jun 2016
- views: 0
62:38
Direwolf20 Singleplay 24 How To Make Iridium With Mass Fab and Replicator
twitch.tv/brinkthegamer ftb direwolf20 1.6.4 lets play Finally, the pinnacle of the most v...
published: 07 Jun 2016
Direwolf20 Singleplay 24 How To Make Iridium With Mass Fab and Replicator
Direwolf20 Singleplay 24 How To Make Iridium With Mass Fab and Replicator
- Report rights infringement
- published: 07 Jun 2016
- views: 0
1:56
Godzilla: Save the Earth - Replicator
Another one of my challenges from Godzilla: Save the Earth. I must destroy the replicator ...
published: 07 Jun 2016
Godzilla: Save the Earth - Replicator
Godzilla: Save the Earth - Replicator
- Report rights infringement
- published: 07 Jun 2016
- views: 6
0:35
TURBOCHARGER USING PLA REPLICATOR-MINI PROJECT
Turbocharger are centrifugal compressor driven by an exhaust gas turbine and employed in e...
published: 07 Jun 2016
TURBOCHARGER USING PLA REPLICATOR-MINI PROJECT
TURBOCHARGER USING PLA REPLICATOR-MINI PROJECT
- Report rights infringement
- published: 07 Jun 2016
- views: 4
2:38
Landmark Beginner's Corner - 2 Materials and the Replicator
In order to build in Landmark you must gather the resources in the world and refine them a...
published: 07 Jun 2016
Landmark Beginner's Corner - 2 Materials and the Replicator
Landmark Beginner's Corner - 2 Materials and the Replicator
- Report rights infringement
- published: 07 Jun 2016
- views: 21
0:56
Uppercut's MakerBot Replicator 2
Live stream of what is being printed
published: 06 Jun 2016
Uppercut's MakerBot Replicator 2
Uppercut's MakerBot Replicator 2
- Report rights infringement
- published: 06 Jun 2016
- views: 0
1:41
Lenovo 433610W ThinkPad Port Replicator Series 3 (Compatible With Select Lenovo Laptop Models)
Lenovo 433610W ThinkPad Port Replicator Series 3 (Compatible With Select Lenovo Laptop Mod...
published: 05 Jun 2016
Lenovo 433610W ThinkPad Port Replicator Series 3 (Compatible With Select Lenovo Laptop Models)
Lenovo 433610W ThinkPad Port Replicator Series 3 (Compatible With Select Lenovo Laptop Models)
- Report rights infringement
- published: 05 Jun 2016
- views: 0
2:45
Suspicion (in the style of Elvis Presley) cover by replicator
Red Karaoke singer replicator sings Suspicionin the style of in the style of Elvis Presley...
published: 04 Jun 2016
Suspicion (in the style of Elvis Presley) cover by replicator
Suspicion (in the style of Elvis Presley) cover by replicator
- Report rights infringement
- published: 04 Jun 2016
- views: 2
close fullscreen
- Playlist
- Chat
41:02
MakerBot Replicator Mini Compact 3D Printer Review
This is my unboxing and full review of the MakerBot Replicator Mini Compact 3D Printer. Fo...
published: 07 Mar 2016
MakerBot Replicator Mini Compact 3D Printer Review
MakerBot Replicator Mini Compact 3D Printer Review
- Report rights infringement
- published: 07 Mar 2016
- views: 1909
29:12
Minecraft Mods FTB Infinity - REPLICATOR [E65] (HermitCraft Modded Server)
Want more FTB Infinity? Hit that LIKE button, peeps! ♥
Minecraft Mods FTB Infinity Hermit...
published: 07 Jun 2015
Minecraft Mods FTB Infinity - REPLICATOR [E65] (HermitCraft Modded Server)
Minecraft Mods FTB Infinity - REPLICATOR [E65] (HermitCraft Modded Server)
- Report rights infringement
- published: 07 Jun 2015
- views: 35282
33:23
Minecraft Mods FTB Infinity - MAX SPEED REPLICATOR !!! [E67] (HermitCraft Modded Server)
Want more FTB Infinity? Hit that LIKE button, peeps! ♥
Minecraft Mods FTB Infinity Hermit...
published: 13 Jun 2015
Minecraft Mods FTB Infinity - MAX SPEED REPLICATOR !!! [E67] (HermitCraft Modded Server)
Minecraft Mods FTB Infinity - MAX SPEED REPLICATOR !!! [E67] (HermitCraft Modded Server)
- Report rights infringement
- published: 13 Jun 2015
- views: 43884
24:33
Element 3D Replicator Options
Check out the advanced replicator options for Element 3D:
https://www.videocopilot.net/pro...
published: 22 Jul 2012
Element 3D Replicator Options
Element 3D Replicator Options
- Report rights infringement
- published: 22 Jul 2012
- views: 94385
25:31
Getting Started with the FlashForge Creator X: Replicator G on Windows (3D Universe)
3D Universe is pleased to present this comprehensive multi-part getting started tutorial f...
published: 12 Jul 2014
Getting Started with the FlashForge Creator X: Replicator G on Windows (3D Universe)
Getting Started with the FlashForge Creator X: Replicator G on Windows (3D Universe)
- Report rights infringement
- published: 12 Jul 2014
- views: 25372
52:48
EEVblog #318 - Makerbot Replicator 3D Printer Unboxing & Review
Forum Topic: http://www.eevblog.com/forum/blog-specific/eevblog-318-makerbot-replicator-3d...
published: 21 Jul 2012
EEVblog #318 - Makerbot Replicator 3D Printer Unboxing & Review
EEVblog #318 - Makerbot Replicator 3D Printer Unboxing & Review
- Report rights infringement
- published: 21 Jul 2012
- views: 205195
20:21
Thaumic Replicator and Boots of the Comet on FTB Infinity!
Modded Minecraft has alliteration. Do you?
http://hermitcraft.com
published: 09 Mar 2015
Thaumic Replicator and Boots of the Comet on FTB Infinity!
Thaumic Replicator and Boots of the Comet on FTB Infinity!
- Report rights infringement
- published: 09 Mar 2015
- views: 4736
45:23
ГаджеТы: достаем из коробки 3D принтер MakerBot Replicator 2 Desktop 3D Printer
УЧАСТВУЙ В АКЦИИ! Выиграй Nokia Lumia 625 - http://youtu.be/VVQCq7Dxwhs
Вот и мне в ручк...
published: 28 Oct 2013
ГаджеТы: достаем из коробки 3D принтер MakerBot Replicator 2 Desktop 3D Printer
ГаджеТы: достаем из коробки 3D принтер MakerBot Replicator 2 Desktop 3D Printer
- Report rights infringement
- published: 28 Oct 2013
- views: 51014
27:04
FTB Infinity Expert - Ep. 40 - Replicator & Christmas
X-Mas Game Giveaway - https://gleam.io/CSegE/christmas-giveaway
Thank you for all the lov...
published: 25 Dec 2015
FTB Infinity Expert - Ep. 40 - Replicator & Christmas
FTB Infinity Expert - Ep. 40 - Replicator & Christmas
- Report rights infringement
- published: 25 Dec 2015
- views: 4794
MakerBot Replicator Mini Compact 3D Printer Review...
![Minecraft Mods FTB Infinity - REPLICATOR [E65] (HermitCraft](http://web.archive.org./web/20160608103614/http://i.ytimg.com/vi/66oRsx15T5o/0.jpg)
Minecraft Mods FTB Infinity - REPLICATOR [E65] (He...
![Minecraft Mods FTB Infinity - MAX SPEED REPLICATOR !!! [E67]](http://web.archive.org./web/20160608103614/http://i.ytimg.com/vi/tGEY2XSJ0Sw/0.jpg)
Minecraft Mods FTB Infinity - MAX SPEED REPLICATOR...
Element 3D Replicator Options...
Getting Started with the FlashForge Creator X: Rep...
EEVblog #318 - Makerbot Replicator 3D Printer Unbo...
Thaumic Replicator and Boots of the Comet on FTB I...
ГаджеТы: достаем из коробки 3D принтер MakerBot Re...
FTB Infinity Expert - Ep. 40 - Replicator & Christ...
photo: Creative Commons / ProjectManhattan
[VIDEO]: Florida Police Respond To Report Of Body In Gator's Mouth
Edit WorldNews.com 07 Jun 2016
The body of an unidentified person was discovered Tuesday afternoon in the Lake Hunter section of Lakeland, Fla. inside the mouth of an eight-foot alligator, CBS News reported.Lakeland police spokesman Gary Gross told CBS affiliate WTSP officers responded to a call concerning an alligator with a body in its mouth. Officers were able to retrieve the body, and Gross said a trapper was called to capture the eight-foot reptile....
photo: PIB of India
US names India as 'major defence partner'
Edit The Times of India 08 Jun 2016
WASHINGTON. The US has recognised India as a "major defence partner", a significant development which paves the way for the country to be treated at par with America's closest allies for defence related trade and technology transfer ... Meanwhile, the White House also said that the meeting between President Obama and Prime Minister Modi resulted in progress on finalising some key defence agreements between India and the US ... RELATED....
photo: Creative Commons / Chmee2
Long-term marijuana use changes brain's reward circuit
Edit Science Daily 07 Jun 2016
Researchers have demonstrated that long-term marijuana users had more activity in the brain's reward processes when presented with cannabis cues than with natural reward cues ... ....
photo: AP / Jim Cole
On Tuesday “California Dreamin” Will Be Reality For Sanders And Clinton
Edit WorldNews.com 07 Jun 2016
Article by WN.com Correspondent Dallas DarlingSenator Bernie Sanders has Hillary Clinton on the ropes. Indeed, on Tuesday the former U.S. Secretary of State will be in the fight of her life as the two Democrat candidates battle in California’s delegate-rich primary. In effect, the Establishment and Superdelegates are already questioning just how formidable their anointed candidate really is ... But in politics, perception is reality....
photo: AP / Oded Balilty
[VIDEO]: Netanyahu, Putin Agree To Expand Cooperation In Terrorism Fight
Edit WorldNews.com 07 Jun 2016
Meetings between Israeli Prime Minister Benjamin Netanyahu and his Russian counterpart Vladimir Putin in Moscow lead to an agreement between the two to expand cooperation in the fight against terrorism, Putin said Tuesday.Putin said the talks focused on boosting bilateral ties and trying to resolve the situation in war-torn Syria, according to The Associated Press....
« back to news headlines
Gurudas Kamat’s quitting not one-off incident; Congress circles predict trend to be replicated
Edit The Times of India 08 Jun 2016
NEW DELHI. Congress circles do not see Ajit Jogi's and Gurudas Kamat's quitting as one-off incidents but predict the trend could be replicated in other states as entrenched leaders — despite being sworn loyalists of 10 Janpath — hit back after being at the receiving end of Rahul Gandhi 's peculiar organisational approach and 'bullying' style of his handpicked PCC presidents ... "There is a basic contradiction in Rahulji's approach....
Scientists aren't superheroes – failure is a valid result
Edit The Guardian 08 Jun 2016
Concern has been growing in the past decade about published scientific claims that other laboratories can’t successfully replicate ... The claim came from a longitudinal study which would require at least 20 years to replicate, but, on the basis of statistics alone, we have good reason to be sceptical about the findings ... This is the replication crisis, and we need to do something about it....
We need more finance for humane research
Edit Belfast Telegraph 08 Jun 2016
These modern methods include sophisticated tests using human cells and tissues and innovative biotechnology, such as organs-on-a-chip, which replicate human physiology, diseases and drug ......
Shilpa Shetty B’Day Special: Jhalak Dikhhla Jaa, Celebrity Big Brother, Bigg Boss, Nach Baliye – A look the diva’s TV stints!
Edit Bollywood Life 08 Jun 2016
Wed, June 8, 2016 10.20am IST by Urmimala Banerjee. comments ... Shilpa Shetty Personal Photos ... Post that, she did not have a film until 2000 (Dhadkan) to replicate the success of the Shah Rukh Khan thriller....
After Last Night's Website Crash, the Government Must Extend the Voter Registration Deadline
Edit Huffington Post 08 Jun 2016
I was in Scotland on the day of the Scottish referendum. I saw young people walking to vote, taking their democratic duty incredibly seriously and talking to each other about the fiscal mandate and Scotland's oil forecast as they walked up the drive of the polling station to vote. That scene in Galashiels was, from what I saw of my campaigning in Scotland, replicated throughout the county and something that was fantastic to see....
Amazon India to use $3bn to enhance customer,seller experience
Edit The Times of India 08 Jun 2016
Mumbai, Jun 8 () Armed with a fresh war chest of USD 3 billion investments in India announced by Amazon CEO Jeff Bezos yesterday, Amazon plans to channel the funds on enhancing customer and seller experience, a top executive of the company said today ... We will replicate what Amazon has been doing in the US over the past 20 years ... The e-commerce player has over 85,000 registered sellers presently ... DSK NRB ANU ... RELATED. From around the web....
IBM India realigns traditional technology services business; brings in top executive to oversee
Edit The Times of India 08 Jun 2016
BENGALURU ... Granger was transferred to India earlier this year, according to a person aware of the move. Granger's role is separate from that of IBM's India chief Vanitha Narayanan, who continues to lead the company's Indian operations ... Over the course of the past decade, IBM replicated the global delivery model that had been perfected by Indian IT firms and built up a workforce of well over 150,000 employees in the country....
Pure Distinction a green phenomenon (Heritage Seeds Pty Ltd)
Edit Public Technologies 08 Jun 2016
(Source. Heritage Seeds Pty Ltd). In a recent radio interview on 1116 SEN, world # 66 golfer Marcus Fraser, rated the newly opened Peninsula Kingswood Country Golf Club greens based on Pure Distinction bentgrass as the best he's ever played ... 'It's (Pure Distinction) really fine,' Michael said ... It gives such a consistent look ... He said the trial results have been replicated at many high profile golf courses across Australia and New Zealand....
China Opens Yuan Bank Card Clearing Market for Competition
Edit Caixin Online 08 Jun 2016
Central bank issued new rules that allow firms like Visa and MasterCard to enter the 55 trillion yuan market, which has been dominated by China UnionPay. By staff reporter Zhang Yuzhe. (Beijing) – China has broken the state-backed monopoly in bank card payments clearance, opening the sector to both domestic and foreign competitors ... It has tried to replicate the model offline but had failed due to regulatory ambiguity ... ....
Jones wary of Cloke’s previous form (Melbourne Football Club)
Edit Public Technologies 08 Jun 2016
(Source. Melbourne Football Club). MELBOURNE remains concerned Travis Cloke could arrest his form slump and replicate his seven-goal heroics on Queen's Birthday at the MCG on Monday afternoon. The Magpie spearhead failed to kick a goal in his return against Port Adelaide last weekend after spending the previous four weeks playing in the VFL ... 'His effort was there and we expect him to be at his best again ... (noodl. 33994574) ....
Like Gurudas Kamat, many Congmen feel hurt
Edit The Times of India 08 Jun 2016
NEW DELHI. Congress circles do not see Ajit Jogi's and Gurudas Kamat's quitting as one-off incidents but predict the trend could be replicated in other states as entrenched leaders — despite being sworn loyalists of 10 Janpath — hit back after being at the receiving end of Rahul Gandhi's peculiar organisational approach and 'bullying' style of his handpicked PCC presidents ... "There is a basic contradiction in Rahulji's approach ... RELATED....
Singapore’s technical institute to set up vocational training centres in India
Edit Indian Express 08 Jun 2016
“We note the strong interest of the Indian Government to engage ITEES for consultancy services in enhancing Technical and Vocational Education and Training (TVET) across India ... Read ... These model institutions will allow for knowledge and technology transfer and eventually be replicated in other parts of India with ITEES continuing to play supportive role to ensure quality and international standards,” Tiong said....
- 1
- 2
- 3
- 4
- 5
- Next page »
