- published: 08 Jul 2014
- views: 9032592
A rainbow is an optical and meteorological phenomenon that causes a spectrum of light to appear in the sky when the Sun shines on to droplets of moisture in the Earth's atmosphere. It takes the form of a multicoloured arc. Rainbows caused by sunlight always appear in the section of sky directly opposite the sun.
In a "primary rainbow", the arc shows red on the outer part, and violet on the inner side. This rainbow is caused by light being refracted while entering a droplet of water, then reflected inside on the back of the droplet and refracted again when leaving it.
In a double rainbow, a second arc is seen outside the primary arc, and has the order of its colours reversed, red facing toward the other one, in both rainbows. This second rainbow is caused by light reflecting twice inside water droplets.
The rainbow is not located at a specific distance, but comes from any water droplets viewed from a certain angle relative to the Sun's rays. Thus, a rainbow is not a physical object, and cannot be physically approached. Indeed, it is impossible for an observer to manoeuvre to see any rainbow from water droplets at any angle other than the customary one of 42 degrees from the direction opposite the Sun. Even if an observer sees another observer who seems "under" or "at the end" of a rainbow, the second observer will see a different rainbow further off-yet, at the same angle as seen by the first observer.
A loom is a device used to weave cloth. The basic purpose of any loom is to hold the warp threads under tension to facilitate the interweaving of the weft threads. The precise shape of the loom and its mechanics may vary, but the basic function is the same.
The word "loom" comes from the Old English "geloma" formed from ge-(perfective prefix) and loma, a root of unknown origin; this meant utensil or tool of any kind. In 1404 it was used to mean a machine to enable weaving thread into cloth. By 1838 it had gained the meaning of a machine for interlacing thread as in weaving, knitting or lacemaking.
Weaving is done by intersecting the longitudinal threads, the warp, i.e. "that which is thrown across", with the transverse threads, the weft, i.e. "that which is woven".
The major components of the loom are the warp beam, heddles, harnesses or shafts (as few as two, four is common, sixteen not unheard of), shuttle, reed and takeup roll. In the loom, yarn processing includes shedding, picking, battening and taking-up operations. These are the principal motions.