- published: 13 May 2014
- views: 6208
Create your page here
-
remove the playlistCantilever
- remove the playlistCantilever
back to playlist
Andy Stauffer (http://www.andythebuilder.com/) explains some terms in the construction industry, such as a "cantilevered floor."
This video was shot in Colorado Springs, Colorado on a job site that is a home being rebuilt from the Black Forest fire.
Transcription:
"Hi, Andy Stauffer with Stauffer & Sons Construction. Here we are, in Black Forest, Colorado. It's March of 2014. This home we're doing here is a fire re-build, after the 2013 Black Forest Fire. This was actually the very first home to burn.
The fire started just a couple hundred yards, this way. We had done a couple of remodels for these folks that owned this home, in the last three, four years. And well, when they found out that they lost their home, we got a call within a day or two, and they said, "Well, we haven't been there yet, but we suspect we're going to want to re-build." So, once they were able to get on site, and assess the damage, which was considerable, they lost probably 90% of their trees on their property here. They decided, "Hey, we do, indeed, want to go ahead and re-build."
And so, here we are, and as you can see, we're well into it. We've got the main floor framing going on. One thing I'd like to do, is oftentimes, you'll hear architectural terms that we take for granted in the industry, that a lot of people hear, but don't necessarily know what they are. One of them would be "cantilever." That is a structural gyration or structural feet, so to speak, where the load that is placed upon this floor system, which we, as pushing down on it, is supported by the fact that this joist, and all of these joists within this system, actually extend way back into the floor. So, what you get here is a load opportunity, in the form of the exterior wall, and a joist that sits over it. And so, it extends out past, and you'd think it would actually give way, except for the fact that all of the load, here, has imparted its structure, its rigidity to it. So, within certain capabilities or capacities, you can exert downward pressure here, and it will be accommodated for, mitigated, by this span here.
Generally, there's a 2:1 principle, to where, if we're going to extend two foot out, I'm going to need at least four foot back. And there's other sizing rules of thumb, that engineers will use, and then, not to mention, just caulking things out, to where they make sure that this is satisfying the load placed upon it. So, that's a cantilever."
This is part 1 of an example showing how to calculate the deflection of a cantilever beam. The solution uses integration to calculate an expression for deflection along the length of the beam.
- published: 02 Mar 2010
- views: 73937
Loras College Engineering/ Class 2014/ Cantilever beam competition
- published: 08 Dec 2011
- views: 4254
Full step-by-step instructions with pictures and text to accompany this guide can be found on madegood.org; http://www.madegood.org/bikes/repair/set-up-a-cantilever-brake/
A traditional cantilever brake has two arms like modern v-brakes. Both arms are pulled by a short straddle cable that is pulled by a yoke mounted on the main brake cable. The brake arms mount on bosses on the bike frame.
- published: 10 Oct 2014
- views: 80042
Cantilever Brakes are still used on many cyclocross bikes and can be tuned to work really effectively. Here's how.
Follow GCN on YouTube: http://gcn.eu/SubscribeToGCN
Getting the most out of your cantilever brakes involves tuning them, and we've got a few of our top tips for how to make your brakes more effective.
We cover getting the most mechanical advantage from your brakes, increasing power and modulation, decreasing friction, checking your pads, and dealing with brake judder.
Buy GCN Cycling Kit! Click here: http://gcn.eu/BuyGCNKitYT
About GCN:
The Global Cycling Network puts you in the centre of the action: from the iconic summit of the Stelvio to the epic trails of Fort William, Scotland, everywhere there is pavé or dirt, world-class racing, and pro riders, we will be there bringing you all the action, essential analysis and unparalleled access every week, every month, and every year.
Welcome to the Global Cycling Network | Inside cycling
Youtube Channel - http://gcn.eu/gcnYT
Facebook - http://gcn.eu/gcnFb
Google+ - http://gcn.eu/gcnGPlus
Twitter - http://gcn.eu/gcnTW
Leave us a comment below!
- published: 20 Oct 2014
- views: 67463
I show how to convert from cantilever brakes to V-brakes. The cantilever brakes on the bike were all broken when I got it. I could have replaced them with new cantilever brakes, but I decided to convert it over to v-brakes instead.
Installing Trigger Shifters/V Brake Levers On Mountain Bike :
https://www.youtube.com/watch?v=c9wblWPPSUg
**If the video was useful or interesting please give it a "thumbs up" and consider subscribing.
-Website: http://www.RJTheBikeGuy.com
-Facebook: https://www.facebook.com/RJTheBikeGuy
-Subscribe Here: http://www.youtube.com/subscription_center?add_user=shyflirt1
-YouTube Channel: https://www.youtube.com/RJTheBikeGuy
- published: 20 May 2016
- views: 23051
Full Cantilever Method frame analysis example, including assumptions and approximations, determination of assumed column axial forces, full solution for all frame member forces and the construction of axial, shear and moment diagrams.
- published: 25 Oct 2013
- views: 19752
How to install and adjust Cantilever, smooth post brake calipers.
Not your brake type? Watch this video: https://www.youtube.com/watch?v=j6ANuieQR4w&index;=7&list;=PLGCTGpvdT04Re5yrxKOVg1yjuollLGDwZ
The Park Tool Guide To Rim Brakes: https://www.youtube.com/watch?v=qWtM5c-X0gM&index;=1&list;=PLGCTGpvdT04Re5yrxKOVg1yjuollLGDwZ
Tools list
Hex Wrech, Combination Wrench, Cable Cutter, Torque Wrench, Lubricant, Thread Locker
• HEX & TORX® COMPATIBLE TOOLS
http://www.parktool.com/category/hex-torx-compatible-tools
• MW-SET.2 METRIC WRENCH SET
http://www.parktool.com/product/metric-wrench-set-mw-set-2
• CN-10 PROFESSIONAL CABLE AND HOUSING CUTTER
http://www.parktool.com/product/professional-cable-and-housing-cutter-cn-10
• ATD-1 ADJUSTABLE TORQUE DRIVER
http://www.parktool.com/product/adjustable-torque-driver-atd-1
• TW-6 Ratcheting “Click Type” Torque Wrench
http://www.parktool.com/product/ratcheting-click-type-torque-wrench-tw-5
• PPL-1 PolyLube 1000 Lubricant
http://www.parktool.com/product/polylube-1000-lubricant-tube-ppl-1
Find more tool information and brake related repair help articles on our website: www.parktool.com
The cantilever caliper rim brake was once common on MTB bikes, but has been replaced in popularity by a similar brake, the “Linear Pull” type. Cantilever calipers attach to separate frame pivots on either side of the wheel. The inner-wire attaches to a carrier piece located above the tire. The carrier is pulled upward causing the caliper arms to swing inward.
Cantilever rim brakes rely on hand pressure at the brake levers being transferred to the brake pads and the rim. Begin any adjustments by making sure the brake levers are positioned so they are easy and comfortable to reach. Rotate the lever so it is in line with the rider's arm, making it comfortable to reach and use.
MTB levers commonly have a setscrew on the lever body that allows the lever to be set closer to the grip. The lever reach can then be set according to the rider's hand size and riding style. Tighten the reach setscrews and bring the levers toward the grip to accommodate smaller hands or shorter fingers.
The cable system connects the brake lever to the caliper at the wheel. The brake inner-wire has a fitting on one end, which sits in the lever. Upright bar levers use a round disc shaped end about 7mm in diameter.
The inner-wire passes through brake housing, which allows the inner-wire to connect from the levers to housing stops on the frame. Housing also allows for bends around corners on the way to the brake caliper. Housing should be neither too long nor too short. For more detail on brake housing and housing length, see Housing and Cable Sizing.
- published: 05 Apr 2016
- views: 4004
Cantilever
A cantilever is a rigid structural element, such as a beam or a plate, anchored at only one end to a (usually vertical) support from which it is protruding. Cantilevers can also be constructed with trusses or slabs. When subjected to a structural load, the cantilever carries the load to the support where it is forced against by a moment and shear stress.
Cantilever construction allows for overhanging structures without external bracing, in contrast to constructions supported at both ends with loads applied between the supports, such as a simply supported beam found in a post and lintel system.
In bridges, towers, and buildings
Cantilevers are widely found in construction, notably in cantilever bridges and balconies (see corbel). In cantilever bridges the cantilevers are usually built as pairs, with each cantilever used to support one end of a central section. The Forth Bridge in Scotland is an example of a cantilever truss bridge. A cantilever in a traditionally timber framed building is called a jetty or forebay. In the southern United States a historic barn type is the cantilever barn of log construction.
This page contains text from Wikipedia, the Free Encyclopedia -
http://wn.com/Cantilever
This article is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License, which means that you can copy and modify it as long as the entire work (including additions) remains under this license.
This article is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License, which means that you can copy and modify it as long as the entire work (including additions) remains under this license.
- Loading...
-
2:22Episode 02: What is a Cantilever?
Episode 02: What is a Cantilever?Episode 02: What is a Cantilever?
Andy Stauffer (http://www.andythebuilder.com/) explains some terms in the construction industry, such as a "cantilevered floor." This video was shot in Colorado Springs, Colorado on a job site that is a home being rebuilt from the Black Forest fire. Transcription: "Hi, Andy Stauffer with Stauffer & Sons Construction. Here we are, in Black Forest, Colorado. It's March of 2014. This home we're doing here is a fire re-build, after the 2013 Black Forest Fire. This was actually the very first home to burn. The fire started just a couple hundred yards, this way. We had done a couple of remodels for these folks that owned this home, in the last three, four years. And well, when they found out that they lost their home, we got a call within a day or two, and they said, "Well, we haven't been there yet, but we suspect we're going to want to re-build." So, once they were able to get on site, and assess the damage, which was considerable, they lost probably 90% of their trees on their property here. They decided, "Hey, we do, indeed, want to go ahead and re-build." And so, here we are, and as you can see, we're well into it. We've got the main floor framing going on. One thing I'd like to do, is oftentimes, you'll hear architectural terms that we take for granted in the industry, that a lot of people hear, but don't necessarily know what they are. One of them would be "cantilever." That is a structural gyration or structural feet, so to speak, where the load that is placed upon this floor system, which we, as pushing down on it, is supported by the fact that this joist, and all of these joists within this system, actually extend way back into the floor. So, what you get here is a load opportunity, in the form of the exterior wall, and a joist that sits over it. And so, it extends out past, and you'd think it would actually give way, except for the fact that all of the load, here, has imparted its structure, its rigidity to it. So, within certain capabilities or capacities, you can exert downward pressure here, and it will be accommodated for, mitigated, by this span here. Generally, there's a 2:1 principle, to where, if we're going to extend two foot out, I'm going to need at least four foot back. And there's other sizing rules of thumb, that engineers will use, and then, not to mention, just caulking things out, to where they make sure that this is satisfying the load placed upon it. So, that's a cantilever." -
8:56Cantilever Beam 1.MP4
Cantilever Beam 1.MP4Cantilever Beam 1.MP4
This is part 1 of an example showing how to calculate the deflection of a cantilever beam. The solution uses integration to calculate an expression for deflection along the length of the beam. -
2:54Loras College Engineering-Steve Wilke Cantilever beam
Loras College Engineering-Steve Wilke Cantilever beamLoras College Engineering-Steve Wilke Cantilever beam
Loras College Engineering/ Class 2014/ Cantilever beam competition -
6:11Set Up A Cantilever Brake
Set Up A Cantilever BrakeSet Up A Cantilever Brake
Full step-by-step instructions with pictures and text to accompany this guide can be found on madegood.org; http://www.madegood.org/bikes/repair/set-up-a-cantilever-brake/ A traditional cantilever brake has two arms like modern v-brakes. Both arms are pulled by a short straddle cable that is pulled by a yoke mounted on the main brake cable. The brake arms mount on bosses on the bike frame. -
6:29Physics of Life - Cantilevers
Physics of Life - CantileversPhysics of Life - Cantilevers
-
5:37How To Fine Tune Cantilevers For Cyclocross
How To Fine Tune Cantilevers For CyclocrossHow To Fine Tune Cantilevers For Cyclocross
Cantilever Brakes are still used on many cyclocross bikes and can be tuned to work really effectively. Here's how. Follow GCN on YouTube: http://gcn.eu/SubscribeToGCN Getting the most out of your cantilever brakes involves tuning them, and we've got a few of our top tips for how to make your brakes more effective. We cover getting the most mechanical advantage from your brakes, increasing power and modulation, decreasing friction, checking your pads, and dealing with brake judder. Buy GCN Cycling Kit! Click here: http://gcn.eu/BuyGCNKitYT About GCN: The Global Cycling Network puts you in the centre of the action: from the iconic summit of the Stelvio to the epic trails of Fort William, Scotland, everywhere there is pavé or dirt, world-class racing, and pro riders, we will be there bringing you all the action, essential analysis and unparalleled access every week, every month, and every year. Welcome to the Global Cycling Network | Inside cycling Youtube Channel - http://gcn.eu/gcnYT Facebook - http://gcn.eu/gcnFb Google+ - http://gcn.eu/gcnGPlus Twitter - http://gcn.eu/gcnTW Leave us a comment below! -
25:57Converting From Cantilever To V-Brakes
Converting From Cantilever To V-BrakesConverting From Cantilever To V-Brakes
I show how to convert from cantilever brakes to V-brakes. The cantilever brakes on the bike were all broken when I got it. I could have replaced them with new cantilever brakes, but I decided to convert it over to v-brakes instead. Installing Trigger Shifters/V Brake Levers On Mountain Bike : https://www.youtube.com/watch?v=c9wblWPPSUg **If the video was useful or interesting please give it a "thumbs up" and consider subscribing. -Website: http://www.RJTheBikeGuy.com -Facebook: https://www.facebook.com/RJTheBikeGuy -Subscribe Here: http://www.youtube.com/subscription_center?add_user=shyflirt1 -YouTube Channel: https://www.youtube.com/RJTheBikeGuy -
5:54How to draw shear Force & Bending moment diagram (Cantilever beam) - GATE 2016 examination
How to draw shear Force & Bending moment diagram (Cantilever beam) - GATE 2016 examinationHow to draw shear Force & Bending moment diagram (Cantilever beam) - GATE 2016 examination
This video explains how to draw shear force & bending moment diagram in case of cantilever beam carrying uniformly distributed load & point load. Useful for second year mechanical engineering students & those preparing for GATE 2016 examination. -
22:13EXAMPLE - Cantilever Method for Approximate Building Frame Analysis
EXAMPLE - Cantilever Method for Approximate Building Frame AnalysisEXAMPLE - Cantilever Method for Approximate Building Frame Analysis
Full Cantilever Method frame analysis example, including assumptions and approximations, determination of assumed column axial forces, full solution for all frame member forces and the construction of axial, shear and moment diagrams. -
16:07Brake Caliper Mounting & Adjustment - Cantilever Smooth Post
Brake Caliper Mounting & Adjustment - Cantilever Smooth PostBrake Caliper Mounting & Adjustment - Cantilever Smooth Post
How to install and adjust Cantilever, smooth post brake calipers. Not your brake type? Watch this video: https://www.youtube.com/watch?v=j6ANuieQR4w&index;=7&list;=PLGCTGpvdT04Re5yrxKOVg1yjuollLGDwZ The Park Tool Guide To Rim Brakes: https://www.youtube.com/watch?v=qWtM5c-X0gM&index;=1&list;=PLGCTGpvdT04Re5yrxKOVg1yjuollLGDwZ Tools list Hex Wrech, Combination Wrench, Cable Cutter, Torque Wrench, Lubricant, Thread Locker • HEX & TORX® COMPATIBLE TOOLS http://www.parktool.com/category/hex-torx-compatible-tools • MW-SET.2 METRIC WRENCH SET http://www.parktool.com/product/metric-wrench-set-mw-set-2 • CN-10 PROFESSIONAL CABLE AND HOUSING CUTTER http://www.parktool.com/product/professional-cable-and-housing-cutter-cn-10 • ATD-1 ADJUSTABLE TORQUE DRIVER http://www.parktool.com/product/adjustable-torque-driver-atd-1 • TW-6 Ratcheting “Click Type” Torque Wrench http://www.parktool.com/product/ratcheting-click-type-torque-wrench-tw-5 • PPL-1 PolyLube 1000 Lubricant http://www.parktool.com/product/polylube-1000-lubricant-tube-ppl-1 Find more tool information and brake related repair help articles on our website: www.parktool.com The cantilever caliper rim brake was once common on MTB bikes, but has been replaced in popularity by a similar brake, the “Linear Pull” type. Cantilever calipers attach to separate frame pivots on either side of the wheel. The inner-wire attaches to a carrier piece located above the tire. The carrier is pulled upward causing the caliper arms to swing inward. Cantilever rim brakes rely on hand pressure at the brake levers being transferred to the brake pads and the rim. Begin any adjustments by making sure the brake levers are positioned so they are easy and comfortable to reach. Rotate the lever so it is in line with the rider's arm, making it comfortable to reach and use. MTB levers commonly have a setscrew on the lever body that allows the lever to be set closer to the grip. The lever reach can then be set according to the rider's hand size and riding style. Tighten the reach setscrews and bring the levers toward the grip to accommodate smaller hands or shorter fingers. The cable system connects the brake lever to the caliper at the wheel. The brake inner-wire has a fitting on one end, which sits in the lever. Upright bar levers use a round disc shaped end about 7mm in diameter. The inner-wire passes through brake housing, which allows the inner-wire to connect from the levers to housing stops on the frame. Housing also allows for bends around corners on the way to the brake caliper. Housing should be neither too long nor too short. For more detail on brake housing and housing length, see Housing and Cable Sizing.
-
Episode 02: What is a Cantilever?
Andy Stauffer (http://www.andythebuilder.com/) explains some terms in the construction industry, such as a "cantilevered floor." This video was shot in Colorado Springs, Colorado on a job site that is a home being rebuilt from the Black Forest fire. Transcription: "Hi, Andy Stauffer with Stauffer & Sons Construction. Here we are, in Black Forest, Colorado. It's March of 2014. This home we're doing here is a fire re-build, after the 2013 Black Forest Fire. This was actually the very first home to burn. The fire started just a couple hundred yards, this way. We had done a couple of remodels for these folks that owned this home, in the last three, four years. And well, when they found out that they lost their home, we got a call within a day or two, and they said, "Well, we haven't been t... -
Cantilever Beam 1.MP4
This is part 1 of an example showing how to calculate the deflection of a cantilever beam. The solution uses integration to calculate an expression for deflection along the length of the beam. -
Loras College Engineering-Steve Wilke Cantilever beam
Loras College Engineering/ Class 2014/ Cantilever beam competition -
Set Up A Cantilever Brake
Full step-by-step instructions with pictures and text to accompany this guide can be found on madegood.org; http://www.madegood.org/bikes/repair/set-up-a-cantilever-brake/ A traditional cantilever brake has two arms like modern v-brakes. Both arms are pulled by a short straddle cable that is pulled by a yoke mounted on the main brake cable. The brake arms mount on bosses on the bike frame. -
Physics of Life - Cantilevers
-
How To Fine Tune Cantilevers For Cyclocross
Cantilever Brakes are still used on many cyclocross bikes and can be tuned to work really effectively. Here's how. Follow GCN on YouTube: http://gcn.eu/SubscribeToGCN Getting the most out of your cantilever brakes involves tuning them, and we've got a few of our top tips for how to make your brakes more effective. We cover getting the most mechanical advantage from your brakes, increasing power and modulation, decreasing friction, checking your pads, and dealing with brake judder. Buy GCN Cycling Kit! Click here: http://gcn.eu/BuyGCNKitYT About GCN: The Global Cycling Network puts you in the centre of the action: from the iconic summit of the Stelvio to the epic trails of Fort William, Scotland, everywhere there is pavé or dirt, world-class racing, and pro riders, we will be there bri... -
Converting From Cantilever To V-Brakes
I show how to convert from cantilever brakes to V-brakes. The cantilever brakes on the bike were all broken when I got it. I could have replaced them with new cantilever brakes, but I decided to convert it over to v-brakes instead. Installing Trigger Shifters/V Brake Levers On Mountain Bike : https://www.youtube.com/watch?v=c9wblWPPSUg **If the video was useful or interesting please give it a "thumbs up" and consider subscribing. -Website: http://www.RJTheBikeGuy.com -Facebook: https://www.facebook.com/RJTheBikeGuy -Subscribe Here: http://www.youtube.com/subscription_center?add_user=shyflirt1 -YouTube Channel: https://www.youtube.com/RJTheBikeGuy -
How to draw shear Force & Bending moment diagram (Cantilever beam) - GATE 2016 examination
This video explains how to draw shear force & bending moment diagram in case of cantilever beam carrying uniformly distributed load & point load. Useful for second year mechanical engineering students & those preparing for GATE 2016 examination. -
EXAMPLE - Cantilever Method for Approximate Building Frame Analysis
Full Cantilever Method frame analysis example, including assumptions and approximations, determination of assumed column axial forces, full solution for all frame member forces and the construction of axial, shear and moment diagrams. -
Brake Caliper Mounting & Adjustment - Cantilever Smooth Post
How to install and adjust Cantilever, smooth post brake calipers. Not your brake type? Watch this video: https://www.youtube.com/watch?v=j6ANuieQR4w&index;=7&list;=PLGCTGpvdT04Re5yrxKOVg1yjuollLGDwZ The Park Tool Guide To Rim Brakes: https://www.youtube.com/watch?v=qWtM5c-X0gM&index;=1&list;=PLGCTGpvdT04Re5yrxKOVg1yjuollLGDwZ Tools list Hex Wrech, Combination Wrench, Cable Cutter, Torque Wrench, Lubricant, Thread Locker • HEX & TORX® COMPATIBLE TOOLS http://www.parktool.com/category/hex-torx-compatible-tools • MW-SET.2 METRIC WRENCH SET http://www.parktool.com/product/metric-wrench-set-mw-set-2 • CN-10 PROFESSIONAL CABLE AND HOUSING CUTTER http://www.parktool.com/product/professional-cable-and-housing-cutter-cn-10 • ATD-1 ADJUSTABLE TORQUE DRIVER http://www.parktool.com/product/adjustable-...
Episode 02: What is a Cantilever?
- Order: Reorder
- Duration: 2:22
- Updated: 13 May 2014
- views: 6208
Andy Stauffer (http://www.andythebuilder.com/) explains some terms in the construction industry, such as a "cantilevered floor."
This video was shot in Colorad...
Andy Stauffer (http://www.andythebuilder.com/) explains some terms in the construction industry, such as a "cantilevered floor."
This video was shot in Colorado Springs, Colorado on a job site that is a home being rebuilt from the Black Forest fire.
Transcription:
"Hi, Andy Stauffer with Stauffer & Sons Construction. Here we are, in Black Forest, Colorado. It's March of 2014. This home we're doing here is a fire re-build, after the 2013 Black Forest Fire. This was actually the very first home to burn.
The fire started just a couple hundred yards, this way. We had done a couple of remodels for these folks that owned this home, in the last three, four years. And well, when they found out that they lost their home, we got a call within a day or two, and they said, "Well, we haven't been there yet, but we suspect we're going to want to re-build." So, once they were able to get on site, and assess the damage, which was considerable, they lost probably 90% of their trees on their property here. They decided, "Hey, we do, indeed, want to go ahead and re-build."
And so, here we are, and as you can see, we're well into it. We've got the main floor framing going on. One thing I'd like to do, is oftentimes, you'll hear architectural terms that we take for granted in the industry, that a lot of people hear, but don't necessarily know what they are. One of them would be "cantilever." That is a structural gyration or structural feet, so to speak, where the load that is placed upon this floor system, which we, as pushing down on it, is supported by the fact that this joist, and all of these joists within this system, actually extend way back into the floor. So, what you get here is a load opportunity, in the form of the exterior wall, and a joist that sits over it. And so, it extends out past, and you'd think it would actually give way, except for the fact that all of the load, here, has imparted its structure, its rigidity to it. So, within certain capabilities or capacities, you can exert downward pressure here, and it will be accommodated for, mitigated, by this span here.
Generally, there's a 2:1 principle, to where, if we're going to extend two foot out, I'm going to need at least four foot back. And there's other sizing rules of thumb, that engineers will use, and then, not to mention, just caulking things out, to where they make sure that this is satisfying the load placed upon it. So, that's a cantilever."
wn.com/Episode 02 What Is A Cantilever
Andy Stauffer (http://www.andythebuilder.com/) explains some terms in the construction industry, such as a "cantilevered floor."
This video was shot in Colorado Springs, Colorado on a job site that is a home being rebuilt from the Black Forest fire.
Transcription:
"Hi, Andy Stauffer with Stauffer & Sons Construction. Here we are, in Black Forest, Colorado. It's March of 2014. This home we're doing here is a fire re-build, after the 2013 Black Forest Fire. This was actually the very first home to burn.
The fire started just a couple hundred yards, this way. We had done a couple of remodels for these folks that owned this home, in the last three, four years. And well, when they found out that they lost their home, we got a call within a day or two, and they said, "Well, we haven't been there yet, but we suspect we're going to want to re-build." So, once they were able to get on site, and assess the damage, which was considerable, they lost probably 90% of their trees on their property here. They decided, "Hey, we do, indeed, want to go ahead and re-build."
And so, here we are, and as you can see, we're well into it. We've got the main floor framing going on. One thing I'd like to do, is oftentimes, you'll hear architectural terms that we take for granted in the industry, that a lot of people hear, but don't necessarily know what they are. One of them would be "cantilever." That is a structural gyration or structural feet, so to speak, where the load that is placed upon this floor system, which we, as pushing down on it, is supported by the fact that this joist, and all of these joists within this system, actually extend way back into the floor. So, what you get here is a load opportunity, in the form of the exterior wall, and a joist that sits over it. And so, it extends out past, and you'd think it would actually give way, except for the fact that all of the load, here, has imparted its structure, its rigidity to it. So, within certain capabilities or capacities, you can exert downward pressure here, and it will be accommodated for, mitigated, by this span here.
Generally, there's a 2:1 principle, to where, if we're going to extend two foot out, I'm going to need at least four foot back. And there's other sizing rules of thumb, that engineers will use, and then, not to mention, just caulking things out, to where they make sure that this is satisfying the load placed upon it. So, that's a cantilever."
- published: 13 May 2014
- views: 6208
Cantilever Beam 1.MP4
- Order: Reorder
- Duration: 8:56
- Updated: 02 Mar 2010
- views: 73937
This is part 1 of an example showing how to calculate the deflection of a cantilever beam. The solution uses integration to calculate an expression for deflect...
This is part 1 of an example showing how to calculate the deflection of a cantilever beam. The solution uses integration to calculate an expression for deflection along the length of the beam.
wn.com/Cantilever Beam 1.Mp4
This is part 1 of an example showing how to calculate the deflection of a cantilever beam. The solution uses integration to calculate an expression for deflection along the length of the beam.
- published: 02 Mar 2010
- views: 73937
Loras College Engineering-Steve Wilke Cantilever beam
- Order: Reorder
- Duration: 2:54
- Updated: 08 Dec 2011
- views: 4254
Loras College Engineering/ Class 2014/ Cantilever beam competition
- published: 08 Dec 2011
- views: 4254
Set Up A Cantilever Brake
- Order: Reorder
- Duration: 6:11
- Updated: 10 Oct 2014
- views: 80042
Full step-by-step instructions with pictures and text to accompany this guide can be found on madegood.org; http://www.madegood.org/bikes/repair/set-up-a-cantil...
Full step-by-step instructions with pictures and text to accompany this guide can be found on madegood.org; http://www.madegood.org/bikes/repair/set-up-a-cantilever-brake/
A traditional cantilever brake has two arms like modern v-brakes. Both arms are pulled by a short straddle cable that is pulled by a yoke mounted on the main brake cable. The brake arms mount on bosses on the bike frame.
wn.com/Set Up A Cantilever Brake
Full step-by-step instructions with pictures and text to accompany this guide can be found on madegood.org; http://www.madegood.org/bikes/repair/set-up-a-cantilever-brake/
A traditional cantilever brake has two arms like modern v-brakes. Both arms are pulled by a short straddle cable that is pulled by a yoke mounted on the main brake cable. The brake arms mount on bosses on the bike frame.
- published: 10 Oct 2014
- views: 80042
Physics of Life - Cantilevers
- Order: Reorder
- Duration: 6:29
- Updated: 18 Nov 2009
- views: 5798
- published: 18 Nov 2009
- views: 5798
How To Fine Tune Cantilevers For Cyclocross
- Order: Reorder
- Duration: 5:37
- Updated: 20 Oct 2014
- views: 67463
Cantilever Brakes are still used on many cyclocross bikes and can be tuned to work really effectively. Here's how.
Follow GCN on YouTube: http://gcn.eu/Subscrib...
Cantilever Brakes are still used on many cyclocross bikes and can be tuned to work really effectively. Here's how.
Follow GCN on YouTube: http://gcn.eu/SubscribeToGCN
Getting the most out of your cantilever brakes involves tuning them, and we've got a few of our top tips for how to make your brakes more effective.
We cover getting the most mechanical advantage from your brakes, increasing power and modulation, decreasing friction, checking your pads, and dealing with brake judder.
Buy GCN Cycling Kit! Click here: http://gcn.eu/BuyGCNKitYT
About GCN:
The Global Cycling Network puts you in the centre of the action: from the iconic summit of the Stelvio to the epic trails of Fort William, Scotland, everywhere there is pavé or dirt, world-class racing, and pro riders, we will be there bringing you all the action, essential analysis and unparalleled access every week, every month, and every year.
Welcome to the Global Cycling Network | Inside cycling
Youtube Channel - http://gcn.eu/gcnYT
Facebook - http://gcn.eu/gcnFb
Google+ - http://gcn.eu/gcnGPlus
Twitter - http://gcn.eu/gcnTW
Leave us a comment below!
wn.com/How To Fine Tune Cantilevers For Cyclocross
Cantilever Brakes are still used on many cyclocross bikes and can be tuned to work really effectively. Here's how.
Follow GCN on YouTube: http://gcn.eu/SubscribeToGCN
Getting the most out of your cantilever brakes involves tuning them, and we've got a few of our top tips for how to make your brakes more effective.
We cover getting the most mechanical advantage from your brakes, increasing power and modulation, decreasing friction, checking your pads, and dealing with brake judder.
Buy GCN Cycling Kit! Click here: http://gcn.eu/BuyGCNKitYT
About GCN:
The Global Cycling Network puts you in the centre of the action: from the iconic summit of the Stelvio to the epic trails of Fort William, Scotland, everywhere there is pavé or dirt, world-class racing, and pro riders, we will be there bringing you all the action, essential analysis and unparalleled access every week, every month, and every year.
Welcome to the Global Cycling Network | Inside cycling
Youtube Channel - http://gcn.eu/gcnYT
Facebook - http://gcn.eu/gcnFb
Google+ - http://gcn.eu/gcnGPlus
Twitter - http://gcn.eu/gcnTW
Leave us a comment below!
- published: 20 Oct 2014
- views: 67463
Converting From Cantilever To V-Brakes
- Order: Reorder
- Duration: 25:57
- Updated: 20 May 2016
- views: 23051
I show how to convert from cantilever brakes to V-brakes. The cantilever brakes on the bike were all broken when I got it. I could have replaced them with new c...
I show how to convert from cantilever brakes to V-brakes. The cantilever brakes on the bike were all broken when I got it. I could have replaced them with new cantilever brakes, but I decided to convert it over to v-brakes instead.
Installing Trigger Shifters/V Brake Levers On Mountain Bike :
https://www.youtube.com/watch?v=c9wblWPPSUg
**If the video was useful or interesting please give it a "thumbs up" and consider subscribing.
-Website: http://www.RJTheBikeGuy.com
-Facebook: https://www.facebook.com/RJTheBikeGuy
-Subscribe Here: http://www.youtube.com/subscription_center?add_user=shyflirt1
-YouTube Channel: https://www.youtube.com/RJTheBikeGuy
wn.com/Converting From Cantilever To V Brakes
I show how to convert from cantilever brakes to V-brakes. The cantilever brakes on the bike were all broken when I got it. I could have replaced them with new cantilever brakes, but I decided to convert it over to v-brakes instead.
Installing Trigger Shifters/V Brake Levers On Mountain Bike :
https://www.youtube.com/watch?v=c9wblWPPSUg
**If the video was useful or interesting please give it a "thumbs up" and consider subscribing.
-Website: http://www.RJTheBikeGuy.com
-Facebook: https://www.facebook.com/RJTheBikeGuy
-Subscribe Here: http://www.youtube.com/subscription_center?add_user=shyflirt1
-YouTube Channel: https://www.youtube.com/RJTheBikeGuy
- published: 20 May 2016
- views: 23051
How to draw shear Force & Bending moment diagram (Cantilever beam) - GATE 2016 examination
- Order: Reorder
- Duration: 5:54
- Updated: 02 Dec 2015
- views: 28152
This video explains how to draw shear force & bending moment diagram in case of cantilever beam carrying uniformly distributed load & point load.
Useful for sec...
This video explains how to draw shear force & bending moment diagram in case of cantilever beam carrying uniformly distributed load & point load.
Useful for second year mechanical engineering students & those preparing for GATE 2016 examination.
wn.com/How To Draw Shear Force Bending Moment Diagram (Cantilever Beam) Gate 2016 Examination
EXAMPLE - Cantilever Method for Approximate Building Frame Analysis
- Order: Reorder
- Duration: 22:13
- Updated: 25 Oct 2013
- views: 19752
Full Cantilever Method frame analysis example, including assumptions and approximations, determination of assumed column axial forces, full solution for all fra...
Full Cantilever Method frame analysis example, including assumptions and approximations, determination of assumed column axial forces, full solution for all frame member forces and the construction of axial, shear and moment diagrams.
wn.com/Example Cantilever Method For Approximate Building Frame Analysis
Full Cantilever Method frame analysis example, including assumptions and approximations, determination of assumed column axial forces, full solution for all frame member forces and the construction of axial, shear and moment diagrams.
- published: 25 Oct 2013
- views: 19752
Brake Caliper Mounting & Adjustment - Cantilever Smooth Post
- Order: Reorder
- Duration: 16:07
- Updated: 05 Apr 2016
- views: 4004
How to install and adjust Cantilever, smooth post brake calipers.
Not your brake type? Watch this video: https://www.youtube.com/watch?v=j6ANuieQR4w&index;=7&l;...
How to install and adjust Cantilever, smooth post brake calipers.
Not your brake type? Watch this video: https://www.youtube.com/watch?v=j6ANuieQR4w&index;=7&list;=PLGCTGpvdT04Re5yrxKOVg1yjuollLGDwZ
The Park Tool Guide To Rim Brakes: https://www.youtube.com/watch?v=qWtM5c-X0gM&index;=1&list;=PLGCTGpvdT04Re5yrxKOVg1yjuollLGDwZ
Tools list
Hex Wrech, Combination Wrench, Cable Cutter, Torque Wrench, Lubricant, Thread Locker
• HEX & TORX® COMPATIBLE TOOLS
http://www.parktool.com/category/hex-torx-compatible-tools
• MW-SET.2 METRIC WRENCH SET
http://www.parktool.com/product/metric-wrench-set-mw-set-2
• CN-10 PROFESSIONAL CABLE AND HOUSING CUTTER
http://www.parktool.com/product/professional-cable-and-housing-cutter-cn-10
• ATD-1 ADJUSTABLE TORQUE DRIVER
http://www.parktool.com/product/adjustable-torque-driver-atd-1
• TW-6 Ratcheting “Click Type” Torque Wrench
http://www.parktool.com/product/ratcheting-click-type-torque-wrench-tw-5
• PPL-1 PolyLube 1000 Lubricant
http://www.parktool.com/product/polylube-1000-lubricant-tube-ppl-1
Find more tool information and brake related repair help articles on our website: www.parktool.com
The cantilever caliper rim brake was once common on MTB bikes, but has been replaced in popularity by a similar brake, the “Linear Pull” type. Cantilever calipers attach to separate frame pivots on either side of the wheel. The inner-wire attaches to a carrier piece located above the tire. The carrier is pulled upward causing the caliper arms to swing inward.
Cantilever rim brakes rely on hand pressure at the brake levers being transferred to the brake pads and the rim. Begin any adjustments by making sure the brake levers are positioned so they are easy and comfortable to reach. Rotate the lever so it is in line with the rider's arm, making it comfortable to reach and use.
MTB levers commonly have a setscrew on the lever body that allows the lever to be set closer to the grip. The lever reach can then be set according to the rider's hand size and riding style. Tighten the reach setscrews and bring the levers toward the grip to accommodate smaller hands or shorter fingers.
The cable system connects the brake lever to the caliper at the wheel. The brake inner-wire has a fitting on one end, which sits in the lever. Upright bar levers use a round disc shaped end about 7mm in diameter.
The inner-wire passes through brake housing, which allows the inner-wire to connect from the levers to housing stops on the frame. Housing also allows for bends around corners on the way to the brake caliper. Housing should be neither too long nor too short. For more detail on brake housing and housing length, see Housing and Cable Sizing.
wn.com/Brake Caliper Mounting Adjustment Cantilever Smooth Post
How to install and adjust Cantilever, smooth post brake calipers.
Not your brake type? Watch this video: https://www.youtube.com/watch?v=j6ANuieQR4w&index;=7&list;=PLGCTGpvdT04Re5yrxKOVg1yjuollLGDwZ
The Park Tool Guide To Rim Brakes: https://www.youtube.com/watch?v=qWtM5c-X0gM&index;=1&list;=PLGCTGpvdT04Re5yrxKOVg1yjuollLGDwZ
Tools list
Hex Wrech, Combination Wrench, Cable Cutter, Torque Wrench, Lubricant, Thread Locker
• HEX & TORX® COMPATIBLE TOOLS
http://www.parktool.com/category/hex-torx-compatible-tools
• MW-SET.2 METRIC WRENCH SET
http://www.parktool.com/product/metric-wrench-set-mw-set-2
• CN-10 PROFESSIONAL CABLE AND HOUSING CUTTER
http://www.parktool.com/product/professional-cable-and-housing-cutter-cn-10
• ATD-1 ADJUSTABLE TORQUE DRIVER
http://www.parktool.com/product/adjustable-torque-driver-atd-1
• TW-6 Ratcheting “Click Type” Torque Wrench
http://www.parktool.com/product/ratcheting-click-type-torque-wrench-tw-5
• PPL-1 PolyLube 1000 Lubricant
http://www.parktool.com/product/polylube-1000-lubricant-tube-ppl-1
Find more tool information and brake related repair help articles on our website: www.parktool.com
The cantilever caliper rim brake was once common on MTB bikes, but has been replaced in popularity by a similar brake, the “Linear Pull” type. Cantilever calipers attach to separate frame pivots on either side of the wheel. The inner-wire attaches to a carrier piece located above the tire. The carrier is pulled upward causing the caliper arms to swing inward.
Cantilever rim brakes rely on hand pressure at the brake levers being transferred to the brake pads and the rim. Begin any adjustments by making sure the brake levers are positioned so they are easy and comfortable to reach. Rotate the lever so it is in line with the rider's arm, making it comfortable to reach and use.
MTB levers commonly have a setscrew on the lever body that allows the lever to be set closer to the grip. The lever reach can then be set according to the rider's hand size and riding style. Tighten the reach setscrews and bring the levers toward the grip to accommodate smaller hands or shorter fingers.
The cable system connects the brake lever to the caliper at the wheel. The brake inner-wire has a fitting on one end, which sits in the lever. Upright bar levers use a round disc shaped end about 7mm in diameter.
The inner-wire passes through brake housing, which allows the inner-wire to connect from the levers to housing stops on the frame. Housing also allows for bends around corners on the way to the brake caliper. Housing should be neither too long nor too short. For more detail on brake housing and housing length, see Housing and Cable Sizing.
- published: 05 Apr 2016
- views: 4004
close fullscreen
- Playlist
- Chat
close fullscreen
- Playlist
- Chat
2:22
Episode 02: What is a Cantilever?
Andy Stauffer (http://www.andythebuilder.com/) explains some terms in the construction ind...
published: 13 May 2014
Episode 02: What is a Cantilever?
Episode 02: What is a Cantilever?
- Report rights infringement
- published: 13 May 2014
- views: 6208
8:56
Cantilever Beam 1.MP4
This is part 1 of an example showing how to calculate the deflection of a cantilever beam....
published: 02 Mar 2010
Cantilever Beam 1.MP4
Cantilever Beam 1.MP4
- Report rights infringement
- published: 02 Mar 2010
- views: 73937
2:54
Loras College Engineering-Steve Wilke Cantilever beam
Loras College Engineering/ Class 2014/ Cantilever beam competition
published: 08 Dec 2011
Loras College Engineering-Steve Wilke Cantilever beam
Loras College Engineering-Steve Wilke Cantilever beam
- Report rights infringement
- published: 08 Dec 2011
- views: 4254
6:11
Set Up A Cantilever Brake
Full step-by-step instructions with pictures and text to accompany this guide can be found...
published: 10 Oct 2014
Set Up A Cantilever Brake
Set Up A Cantilever Brake
- Report rights infringement
- published: 10 Oct 2014
- views: 80042
6:29
Physics of Life - Cantilevers
published: 18 Nov 2009
Physics of Life - Cantilevers
Physics of Life - Cantilevers
- Report rights infringement
- published: 18 Nov 2009
- views: 5798
5:37
How To Fine Tune Cantilevers For Cyclocross
Cantilever Brakes are still used on many cyclocross bikes and can be tuned to work really ...
published: 20 Oct 2014
How To Fine Tune Cantilevers For Cyclocross
How To Fine Tune Cantilevers For Cyclocross
- Report rights infringement
- published: 20 Oct 2014
- views: 67463
25:57
Converting From Cantilever To V-Brakes
I show how to convert from cantilever brakes to V-brakes. The cantilever brakes on the bik...
published: 20 May 2016
Converting From Cantilever To V-Brakes
Converting From Cantilever To V-Brakes
- Report rights infringement
- published: 20 May 2016
- views: 23051
5:54
How to draw shear Force & Bending moment diagram (Cantilever beam) - GATE 2016 examination
This video explains how to draw shear force & bending moment diagram in case of cantilever...
published: 02 Dec 2015
How to draw shear Force & Bending moment diagram (Cantilever beam) - GATE 2016 examination
How to draw shear Force & Bending moment diagram (Cantilever beam) - GATE 2016 examination
- Report rights infringement
- published: 02 Dec 2015
- views: 28152
22:13
EXAMPLE - Cantilever Method for Approximate Building Frame Analysis
Full Cantilever Method frame analysis example, including assumptions and approximations, d...
published: 25 Oct 2013
EXAMPLE - Cantilever Method for Approximate Building Frame Analysis
EXAMPLE - Cantilever Method for Approximate Building Frame Analysis
- Report rights infringement
- published: 25 Oct 2013
- views: 19752
16:07
Brake Caliper Mounting & Adjustment - Cantilever Smooth Post
How to install and adjust Cantilever, smooth post brake calipers.
Not your brake type? W...
published: 05 Apr 2016
Brake Caliper Mounting & Adjustment - Cantilever Smooth Post
Brake Caliper Mounting & Adjustment - Cantilever Smooth Post
- Report rights infringement
- published: 05 Apr 2016
- views: 4004
Episode 02: What is a Cantilever?...
Cantilever Beam 1.MP4...
Loras College Engineering-Steve Wilke Cantilever b...
Set Up A Cantilever Brake...
Physics of Life - Cantilevers...
How To Fine Tune Cantilevers For Cyclocross...
Converting From Cantilever To V-Brakes...
How to draw shear Force & Bending moment diagram ...
EXAMPLE - Cantilever Method for Approximate Buildi...
Brake Caliper Mounting & Adjustment - Cantilever S...
photo: AP / Max Becherer
Protests over shootings block roads in US cities, end in numerous arrests
Edit France24 10 Jul 2016
Protests against the shootings of two black men by police officers shut down main arteries in a number of U.S. cities on Saturday, leading to numerous arrests, scuffles and confrontations between police and demonstrators ... ....
photo: Creative Commons
Bullfighter fatally gored in Spain, first time since 1985
Edit Springfield News-Sun 10 Jul 2016photo: AP / Hassan Ammar
Syria: Russian pilots killed as 'ISIL downs helicopter'
Edit Al Jazeera 10 Jul 2016
Two Russian pilots have been killed in Syria after fighters from the Islamic State of Iraq and Levant (ISIL, also known as ISIS) shot down their helicopter near Palmyra, Russia's defense ministry has said according to local media ... The crew died," Interfax said ... OPINION ... Source. Agencies. Tell us what you think. ....
photo: WN / Imran Nissar
Kashmir violence: Toll reaches 15, curfew imposed
Edit The Times of India 10 Jul 2016
SRINAGAR. Curfew was imposed in Kashmir Valley on Sunday to maintain the law and order situation after 15 protesters were killed in violent clashes with security forces on Saturday, officials said. The Amarnath Yatra has been suspended for the second consecutive day on Sunday. Kashmir divisional commissioner Asgar Hussain Samoon told reporters that curfew has been imposed in the entire valley from midnight to maintain law and order....
photo: AP / Anjum Naveed, File
Pakistan's 'Angel of Mercy' Edhi Dies at 88
Edit WorldNews.com 08 Jul 2016
Pakistan's legendary philanthropist Abdul Sattar Edhi, known as the “Angel of Mercy' who devoted his life to the poor and the destitute, died on Friday at a hospital in Karachi following a prolonged illness, The Associated Press reports ... We have lost a great servant of humanity ... This loss is irreparable for the people of Pakistan."...
« back to news headlines
China’s first draft international crane standards (SINOMACH - China National Machinery Industry Corporation)
Edit Public Technologies 08 Jul 2016
(Source ... The Beijing Hoisting and Conveying Machinery Design Institute recently proposed the drafting of international standards on cantilever cranes ... The successful proposal on the cantilever crane marked a ground-breaking move by China and a breakthrough in the Beijing Institute's work on international standards, helping to raise China's status in the international crane standardization work ... (noodl. 34452894) ....
Akron Art Museum unveils new garden and event space
Edit Ohio 08 Jul 2016
Downtown Akron’s outdoor gathering space is about to expand. Work is being completed on the Akron Art Museum’s new Bud & Susie Rogers Garden, a one-acre park in the shadow of the museum’s cantilevered Roof Cloud. The garden will open July 16 with a preview for members from 10 a.m. to 2 p.m., followed by a free public celebration from 2 to 9 ... The walls alone can seat 150, Masuoka pointed out ... to dusk, he said ... ....
California beach access is free for all
Edit Daily Breeze 07 Jul 2016
This has been an issue up and down the Golden State for decades, from Half Moon Bay, where a Silicon Valley billionaire has managed to illegally block access to a coveted cove, to Malibu's Carbon Beach, where the Hollywood rich have for years refused orders from the California Coastal Commission to provide access paths from the Pacific Coast Highway to the sands below their cantilevered homes ... ....
New railway for Ottawa Region
Edit Ottowa Business Journal 06 Jul 2016
In addition to the repairs and upgrades required to restart railway operations, this will include the addition of a new cycling pathway cantilevered off the upstream side, and a pedestrian walkway on the downstream side, with picnic areas on Lemieux Island, offering a direct view of Parliament Hill," Wojciech Remisz, the president of REMISZ Consulting Engineers, one of the companies in the consortium, said in the release ... ....
New passenger railway proposed for Ottawa region
Edit Ottowa Business Journal 06 Jul 2016
In addition to the repairs and upgrades required to restart railway operations, this will include the addition of a new cycling pathway cantilevered off the upstream side, and a pedestrian walkway on the downstream side, with picnic areas on Lemieux Island, offering a direct view of Parliament Hill," Wojciech Remisz, the president of REMISZ Consulting Engineers, one of the companies in the consortium, said in the release ... ....
80/35 festival will feature visual interaction pavilion created by Iowa State students (Iowa State University)
Edit Public Technologies 06 Jul 2016
(Source. Iowa State University). Go inside the studio with Iowa State design students as they build an interactive pavilion for the 80/35 Music Festival. Video by Dave Olson ... Huberty Faculty Fellow in Architecture ... The curving structure cantilevers toward the top, which provides structural stability and shade, while adjacent benches create a base and offer a place for visitors to rest as they enjoy festival activities ... (noodl. 34423745) ....
Seagate offering three furnished estate models at Quail West
Edit Naples Daily News 03 Jul 2016
Seagate Development Group LLC is now offering three furnished estate model residences for purchase within the Quail West gated golf course community in North Naples ... The Pine Valley residence is also under construction and scheduled for completion in January ... Windows throughout the living areas create a light-filled ambiance and provide views of an infinity edge pool and spa surrounded by a deck that is cantilevered over the pool ... ....
Olympic mountain biking: 10 terms to know for the 2016 Olympic Games in Rio
Edit The Examiner 02 Jul 2016
Just because you are not familiar with mountain biking doesn't mean you can't enjoy the sport during the Olympic Games. Here's a quick terminology guide to help new fans better understand and enjoy the mountain biking races during the 2016 Olympic Games.. 1. Berm ... 2. Cantileveler. A cantilever is one of the most common brakes on mountain bikes. 3. Derailleur ... 4. Endo ... 5....
IKEA recall: Don't blame the parents who didn't install the wall anchors, it's fundamentally bad design
Edit Treehugger 30 Jun 2016
IKEA has just issued a recall of 29 million MALM chests and dressers, which have toppled over and killed at least four children since 1989. Over on sister site MNN.com, Matt Hickman notes that the problem is easily solved. ... wall anchoring ... But for the MALM it is. Matt notes. ... This is not intuitive ... But that is putting a lot of weight on the end of a cantilever, and the dresser has to have substantial weight and depth to resist tipping ... ....
Mordovia Arena to become important part of Saransk life (FIFA - Fédération Internationale de Football Association)
Edit Public Technologies 29 Jun 2016
(Source. FIFA - Fédération Internationale de Football Association). With the 2018 FIFA World Cup Russia™ drawing ever nearer, construction on all the tournament's stadiums continues apace. Every month FIFA.com provides an update for fans on how progress is going. This month's progress ... Elsewhere around Russia ... Already, the builders have mounted five of the assembly blocks for the domed cantilever, with a combined weight of 450 tonnes....
Shipping container pavilion lets it all hang out
Edit Treehugger 28 Jun 2016
Hanging way out on some wild cantilevers, often with no visible means of support ... The most remarkable thing about this project is the incredible cantilevering of boxes; shipping containers are really strong at the corners, not so strong anywhere else....
DTE Energy unveils plans for new public park (DTE Energy Company)
Edit Public Technologies 28 Jun 2016
A free-flowing design for the bar and eating areas that can hold up to 75 guests A 735 square-foot roof deck for a panoramic view of the city, able to hold nearly 50 people A sustainable, green roof space that is designed to conserve and collect runoff water to repurpose it for other trees, grass and plants A theatrical, upward cantilever roof that ......
Design Architect Introduces Dell Medical School Building to Students (Page Southerland Page Inc)
Edit Public Technologies 27 Jun 2016
(Source. Page Southerland Page Inc). On Sunday morning, the Health Learning Building at the Dell Medical School at The University of Texas at Austin opened for an intimate press introduction and celebration of its inaugural 2016 class ... 'This is an amazing building,' he said ... He emphasized the transparency of the curtain wall on the north façade, the beautiful views from the cantilevered stair and south-facing terrace ... 06/27/2016 ... (noodl....
- 1
- 2
- 3
- 4
- 5
- Next page »
