Space Shuttle STS-112 Atlantis Space Station Assembly ISS-9A S1 Truss 2002 NASA
more at
http://scitech.quickfound.net/astro/space_station_news
.html
http://scitech.quickfound.net/astro/space_shuttle_news.html
'JSC1941 - (
2002)
Commander:
Jeff Ashby
Pilot:
Pam Melroy
Mission Specialists:
Sandy Magnus,
Piers Sellers,
Dave Wolf,
Fyodor Yurchikhin
Dates: October 7-18, 2002
Vehicle:
Atlantis OV-104
Payloads:
ISS Flight 9A: S1 Truss
Landing Site:
Runway 22 at
Kennedy Space Center, FL'
NASA film JSC-1941
Public domain film from NASA, slightly cropped to remove uneven edges, with the aspect ratio corrected, and mild video noise reduction applied.
The soundtrack was also processed with volume normalization, noise reduction, clipping reduction, and/or equalization).
http://en.wikipedia.org/wiki/
STS-112
STS-112 (
ISS assembly flight 9A) was an 11-day space shuttle mission to the
International Space Station (ISS) flown by
Space Shuttle Atlantis. Space Shuttle Atlantis was launched on 7
October 2002 at 19:45
UTC from the
Kennedy Space Center's launch pad 39B to deliver the 28,
000 pound
Starboard 1 (S1) truss segment to the
Space Station. Ending a 4.5-million-mile journey, Atlantis landed at 15:44 UTC on
18 October 2002 on runway 33 at the Kennedy Space Center's
Shuttle Landing Facility.
During the launch, the ET bipod ramp shed a chunk of foam that caused a dent ~4" wide and 3" deep into the metal SRB-ET
Attach Ring near the bottom of the left
SRB. Prior to the next mission (
STS-113), an upper-level decision was made at NASA to continue with launches as scheduled. The launch subsequent to that was the ill-fated
STS-107.
Space shuttle Atlantis had been scheduled to visit the International Space Station (ISS) again on
STS-114 mission in
March 2003, however, due to the shuttle
Columbia disaster all space shuttles including Atlantis were temporarily grounded. Due to rescheduling of missions Atlantis did not fly again until
STS-115 on
9 September 2006...
Starboard 1 (S1) truss segment
The S1 truss segment, which provides structural support for the Space Station radiators was the main payload of STS-112 mission.
Boeing Company started constructing the truss in May
1998. The work was completed in
March 1999. The S1 was moved to
KSC in
October 1999 for flight processing. Boeing delivered the S1 to NASA in June 2002 for final preparations and pre-flight checks.
Crew Equipment
Translation Aid
Atlantis also delivered the Crew Equipment Translation Aid (
CETA)
Cart to the Space Station. The CETA cart was attached to the
Mobile Transporter (launched on
STS-110) to be used by assembly crews on later missions.
Mission experiments
STS-112 carried several science experiments to the space station including the Plant Generic
Bioprocessing Apparatus (PGBA),
Commercial Generic Bioprocessing Apparatus (CGBA), the
Protein Crystal Growth Single-locker Thermal
Enclosure System housing the
Protein Crystallization Apparatus for
Microgravity (PCG-STES-PCAM) and samples for the Zeolite Crystal Growth
Furnace (ZCG) experiment.
Shuttle processing
Launch preparations for STS-112 mission were sightly delayed due to tiny cracks found within the plumbing of Atlantis' propulsion system on 17 June 2002 by an inspector. The cracks were in metal flow liners inside the main liquid hydrogen fuel lines that feed the shuttle's three main engines. Although there were no cracks in the actual fuel pipes themselves, the concern was that metal pieces from the flow liners might break off and fly into the engines. In such a worst case scenario, the debris can potentially trigger a catastrophic engine shutdown, which in turn could lead to the loss of the crew and the shuttle...
http://en.wikipedia.org/wiki/Integrated_Truss_Structure
The
Integrated Truss Structure (ITS) forms the backbone of the International Space Station, with mountings for unpressurized logistics carriers, radiators, solar arrays, and other equipment...