DemiGod Crash Handler: DBI Err Fatal Repair LG L80 D380
Loss IMEI, no network, does not see the
SIM, when you try to reset hangs when trying HardReset
error: DemiGod
Crash Handler:
DBI Err
Fatal
Потеря IMEI, нет сети, не видит
SIM, при попытке сброса виснет, при попытке HardReset ошибка: DemiGod Crash Handler: DBI Err Fatal
Soft:
LG
United Mobile Driver
LG
Flash Tool 2014 (
CSE Flash)
D38010d_00.kdz
Instructions:
1) Downloading drivers, then set (smartphone, do not connect when installing)
http://goo.gl/O3UyTB
2) Downloading Flashtool 2014 and put it in the root directory (C :) https://goo.gl/4jmHEb
3) Downloading firmware in the format * .kdz enter imei http://goo.gl/IFzW0i
4)
Copy the firmware * .kdz in the folder with the unpacked Flashtooll 2014 on the disk (
C :)
5)
Turn off your smartphone (it is desirable to remove the battery to completely turn off) to enter "
Download Mode" (on your smartphone is turned off
Hold down the "vol up" and connect the
USB cable to your computer and smartphone).
6)
Once the installation is complete, wait until the device drivers. If necessary, install them manually.
7)
Start the "LG FlashTool 2014.exe"
A) "
Select Type":
CDMA * (default 3GQCT)
"
Version": leave unchanged
"PhoneMode": DIAG
"Select KDZ file": specify the path to the file firmware * .kdz
Push the button "CSE Flash"
B) Push the "
Start" button
C)
Choose the country and language, "Ok"
D) We wait until loading in the window "LG
Mobile Support Tool" and then begin the process of erasing a smartphone and follow the process by stitching.
At the end of the smartphone itself will start flashing rekaveri, make the necessary wipes are and reboot several times until the
Welcome wizard. That's all.
* "
Normal Flash" - to flash
ROM, without data loss. Use if you want to eliminate system errors. For example boot loop after flashing different mods.
"CSE Flash" - Choose this option if you want to complete the formatting of the smartphone. All data will be lost. This method for pure flash ROM. For example, to return the phone to the factory state, or to downgrade the firmware, as well as remove all traces of root. To get into the mode of "CSE Flash" necessary Flashtool in the "Select Type" instead of "3GQST" select "CDMA" (after all the manipulations with firmware mode "CSE Flash" became available for the installation of applications almost all 1.5Gb)
The original instruction is taken on a resource 4pda.ru and adapted specifically for this case :)