- published: 04 Oct 2015
- views: 143
Create your page here
-
remove the playlistShankend
-
remove the playlistShankend Travel Guides
- remove the playlistShankend
- remove the playlistShankend Travel Guides
back to playlist
Disclaimer: I do not own this anime, all rights belong to its rightful owners.
One piece by Toei Animation & Eiichiro Oda
Shanks stops the war at Marineford
- published: 16 Jul 2015
- views: 678796
Shank confronts Cesar.
(Angelo is too cool for a dramatic entrance - 3:00)
PC Steam Version on a SFIV TE2 FightStick. The fight is focused on entertainment rather than a "Let's Play" or a Speed Run.
"Shank" for PS3, XBox 360 and PC (Steam)
Betrayed by the only family he ever knew and left for dead it's up to Shank to seek revenge for the death of his beloved at the hands of the underworld's deadliest assassins.
Developer: Klei Entertainment
Publisher: Electronic Arts
- published: 01 Nov 2010
- views: 34119
Watch, Listen and Learn, Introducing the World's first* "Carbide Head"+"Carbide Holder" double face contact Exchangeable Screw on Head End Mill system with coolant through head capabilities standard.
iMX series Exchangeable Screw on Head Series End mill brochure is available for download at:
http://www.mitsubishicarbide.com/mmus/en/whatsnew/2015_1/imx.html
iMX series Exchangeable Screw on Head connection features the World's first* "Carbide Head"+"Carbide Holder" double face contact connection but, we did not stop there. Careful SWOT analysis of the conventional screw on head products indicated it was PARAMOUNT to re-engineer the carbide head joint connection for the next generation of Exchangeable head products to approach the performance of solid carbide end mills without encountering carbide joint failure due to tensile strength limitations of carbide threads.
Therefore, to overcome inherent tensile strength weakness of carbide threads, Mitsubishi Materials Engineers developed a process that enables a SPECIAL STEEL screw joint to be securely incorporated into the BOTH the CARBIDE HEAD and SHANK thus avoiding thread tensile failure common with ground carbide threads. The result for you is a highly reliable connection that can cope with high cutting loads and coolant thru head options.
In fact, the iMX connection was specifically designed to excel in high demanding heat resistant Aerospace applications were failure mode is typically attributed to joint rigidity resulting in run-out, deflection and poor tool life. The Economical iMX Series Exchangeable Screw on Head Ends are available in Coolant through and non-coolant configurations and will soon be your default solution to costly solid carbide end mill applications.
*According to our own research on exchangeable head end mills
Mitsubishi Materials brochures are available for download. Just select appropriate link below:
Industry Specific brochures are available for download at
http://www.mitsubishicarbide.com/mmus/en/product/catalog/index.html#hand
Grade product brochures are available for download at http://www.mitsubishicarbide.com/mmus/en/product/catalog/grade.html
Turning insert product brochures are available for download at http://www.mitsubishicarbide.com/mmus/en/product/catalog/turning.html
External Turning Tool product brochures are available for download at http://www.mitsubishicarbide.com/mmus/en/product/catalog/tools.html
Boring Bar product brochures are available for download at http://www.mitsubishicarbide.com/mmus/en/product/catalog/boring_bar.html
Grooving Tools product brochures are available for download at http://www.mitsubishicarbide.com/mmus/en/product/catalog/grooving.html
Solid Carbide End Mill product brochures are available for download at http://www.mitsubishicarbide.com/mmus/en/product/catalog/solid_end_mill.html
Milling product brochures are available for download at http://www.mitsubishicarbide.com/mmus/en/product/catalog/cutter.html
Drilling product brochures are available for download at http://www.mitsubishicarbide.com/mmus/en/product/catalog/drilling.html
Mitsubishi Materials USA - Cutting Tools, Social Media Sites:
Face book: http://www.facebook.com/MitsubishiMaterials.US.CuttingTools
Twitter: http://twitter.com/#!/MMUSCuttingTool
YouTube: http://www.youtube.com/user/mitsubishicarbide
Additional Resources:
Experience Mitsubishi Carbide's Patented Online Catalog with downloadable CAD files http://www.mitsubishicarbide.net/mmus/en/catalogue/index.html
More Mitsubishi Cutting Tool Videos can be found at http://www.mitsubishicarbide.com/mmus/en/product/video/index.html
Questions please contact:
Technical Support at 1-800-486-2341
Or
Email MarketingServices@mmus.com
Secure technical inquiries can be submitted to Mitsubishi Materials at https://www.mitsubishicarbide.com/mailform/mmus/en/literature/form.html
Thank you for taking the time to view this video and please visit Mitsubishi Materials USA at http://www.mmus.com
- published: 28 Jan 2014
- views: 3417
Mitsubishi Materials iMX series Exchangeable Screw on Head connection features the World's first* "Carbide Head"+"Carbide Holder" double face contact connection but, we did not stop there. Careful SWOT analysis of conventional screw on head products indicated it was paramount to re-think industry standard and engineer a system that does not rely on ground carbide threads to hold the cutting head on an extension.
To overcome the weakness in conventional ground thread THINK approach, Mitsubishi Materials Engineers developed a patented process that marries a special steel insert into a "hard material" substrate enabling true carbide face/taper contact and avoiding root tensile failure common to carbide bolt on type connections. The result for you is the iMX Advantage, a highly reliable connection that can cope with high cutting loads and coolant thru capabilities standard.
In fact, the iMX connection was specifically designed to excel in high demanding heat resistant Aerospace applications were failure mode is typically attributed to rigidity resulting in deflection, uneven wear, run-out and over all poor tool life. The economical iMX Series Exchangeable Screw on Head Ends are available in coolant through and non-coolant configurations and will soon be your default solution to costly solid carbide end mill applications. *According to our own research on exchangeable head end mills
To see and hear iMX in action, click on this YouTube link: https://www.youtube.com/watch?v=PFzrxINKb7s
The iMX Advantage, coming to your spindle soon!
Mitsubishi Materials brochures are available for download.
http://www.mitsubishicarbide.com/mmus/en/product/new_product/index.html
- published: 02 Apr 2014
- views: 834
Attending IMTS2014, stop by Mitsubishi Materials USA in the West Building booth W-1426 to see our latest cutting tools. Seasoned booth staff will be available to discuss options for fine tuning your spindles and process. As a BONUS, Roush Yates Engines –Official Tooling Partner of Mitsubishi Materials- will have a car and engine in the booth.
An official announcement concerning Mitsubishi Materials partnership with Roush Yates Engines will be made in the booth on Sept. 11, 2014 at 11:00 AM with commemorative Tee's being offered –while supplies last- immediately after. See you at IMTS 2104!
Cycle Start with Confidence with Mitsubishi Materials cutting tools on your spindle!
iMX series Exchangeable Screw on Head Series End mill brochure is available for download at:
http://www.mitsubishicarbide.com/mmus/en/whatsnew/2015_1/imx.html
iMX series Exchangeable Screw on Head connection features the Worlds first* "Carbide Head"+"Carbide Holder" double face contact connection but, we did not stop there. Careful SWOT analysis of the conventional screw on head products indicated it was PARAMOUNT to re-engineer the carbide head joint connection for the next generation of Exchangeable head products to approach the performance of solid carbide end mills without encountering carbide joint failure due to tensile strength limitations of carbide threads.
Therefore, to overcome inherent tensile strength weakness of carbide threads, Mitsubishi Materials Engineers developed a process that enables a SPECIAL STEEL screw joint to be securely incorporated into the BOTH the CARBIDE HEAD and SHANK thus avoiding thread tensile failure common with ground carbide threads. The result for you is a highly reliable connection that can cope with high cutting loads and coolant thru head options.
In fact, the iMX connection was specifically designed to excel in high demanding heat resistant Aerospace applications were failure mode is typically attributed to joint rigidity resulting in run-out, deflection and poor tool life. The Economical iMX Series Exchangeable Screw on Head Ends are available in Coolant through and non-coolant configurations and will soon be your default solution to costly solid carbide end mill applications.
*According to our own research on exchangeable head end mills
Mitsubishi Materials brochures are available for download. Just select appropriate link below:
Industry Specific brochures are available for download at
http://www.mitsubishicarbide.com/mmus/en/product/catalog/index.html#hand
Grade product brochures are available for download at http://www.mitsubishicarbide.com/mmus/en/product/catalog/grade.html
Turning insert product brochures are available for download at http://www.mitsubishicarbide.com/mmus/en/product/catalog/turning.html
External Turning Tool product brochures are available for download at http://www.mitsubishicarbide.com/mmus/en/product/catalog/tools.html
Boring Bar product brochures are available for download at http://www.mitsubishicarbide.com/mmus/en/product/catalog/boring_bar.html
Grooving Tools product brochures are available for download at http://www.mitsubishicarbide.com/mmus/en/product/catalog/grooving.html
Solid Carbide End Mill product brochures are available for download at http://www.mitsubishicarbide.com/mmus/en/product/catalog/solid_end_mill.html
Milling product brochures are available for download at http://www.mitsubishicarbide.com/mmus/en/product/catalog/cutter.html
Drilling product brochures are available for download at http://www.mitsubishicarbide.com/mmus/en/product/catalog/drilling.html
To see all Mitsubishi Cutting Tool product channels on YouTube, follow link: http://www.youtube.com/user/mitsubishicarbide#g/p
Additional Resources:
Experience Mitsubishi Carbide's Patented Online Catalog with downloadable CAD files http://www.mitsubishicarbide.net/mmus/en/catalogue/index.html
More Mitsubishi Cutting Tool Videos can be found at http://www.mitsubishicarbide.com/mmus/en/product/video/index.html
Questions please contact:
Technical Support at 1-800-486-2341
Or
Email MarketingServices@mmus.com
Secure technical inquiries can be submitted to Mitsubishi Materials at https://www.mitsubishicarbide.com/mailform/mmus/en/literature/form.html
Thank you for taking the time to view this video and please visit Mitsubishi Materials USA at http://www.mmus.com
- published: 04 Nov 2013
- views: 4437
Suscripción gratuita a los videos. Free subscription: http://full.sc/O2qEiJ Roasted confit leg lamb shank end with little onions Confitaremos los jarretes en aceite de girasol junto a las cebollitas y después los doraremos en el horno. Así conseguiremos que quede jugoso por dentro y crujiente por fuera
- published: 01 Sep 2011
- views: 2038
location on Google Map
Herbert W.B. (1989) Railway Ghosts and Phantoms, London: David & Charles PLC, ISBN 0-7153-9783-4
Shankend
Shankend Manor is a sixteenth-century mansion located some six miles south of Hawick, close to Whitrope Siding in Scotland. It was constructed to manage the surrounding countryside and now overlooks the Edinburgh Waverley line. The manor fell into disuse during the 1930s and by the 1970s had been removed from local road maps. The Maiden Paps are located close to Shankend.
Haunting
According to local legend the manor and its surrounding grounds are a center of paranormal activity. Some legends hold that the locale is haunted by restless spirits of German soldiers who died there during a cholera outbreak in 1917, at which time the grounds being used as a POW camp. Other legend hold that the manor house itself was the site of one or more events which lead it to develop a paranormal aura.
The most common manifestation reported by these legends is a feeling of dread.
References
This page contains text from Wikipedia, the Free Encyclopedia -
https://wn.com/Shankend
This article is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License, which means that you can copy and modify it as long as the entire work (including additions) remains under this license.
This article is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License, which means that you can copy and modify it as long as the entire work (including additions) remains under this license.
- Loading...
-
1:01Shankend bridge swing
Shankend bridge swingShankend bridge swing
-
5:04Shanks Stops the War
Shanks Stops the WarShanks Stops the War
Disclaimer: I do not own this anime, all rights belong to its rightful owners. One piece by Toei Animation & Eiichiro Oda Shanks stops the war at Marineford -
0:34Shankend
ShankendShankend
Shankend Viaduct Clip -
2:23Shankend
ShankendShankend
-
5:24[HD] Shank - Final Boss & Ending Cinematics (PC)
[HD] Shank - Final Boss & Ending Cinematics (PC)[HD] Shank - Final Boss & Ending Cinematics (PC)
Shank confronts Cesar. (Angelo is too cool for a dramatic entrance - 3:00) PC Steam Version on a SFIV TE2 FightStick. The fight is focused on entertainment rather than a "Let's Play" or a Speed Run. "Shank" for PS3, XBox 360 and PC (Steam) Betrayed by the only family he ever knew and left for dead it's up to Shank to seek revenge for the death of his beloved at the hands of the underworld's deadliest assassins. Developer: Klei Entertainment Publisher: Electronic Arts -
1:34iMX Advantage, Mitsubishi Materials Exchangeable Carbide Head with Carbide Shank End Mills
iMX Advantage, Mitsubishi Materials Exchangeable Carbide Head with Carbide Shank End MillsiMX Advantage, Mitsubishi Materials Exchangeable Carbide Head with Carbide Shank End Mills
Watch, Listen and Learn, Introducing the World's first* "Carbide Head"+"Carbide Holder" double face contact Exchangeable Screw on Head End Mill system with coolant through head capabilities standard. iMX series Exchangeable Screw on Head Series End mill brochure is available for download at: http://www.mitsubishicarbide.com/mmus/en/whatsnew/2015_1/imx.html iMX series Exchangeable Screw on Head connection features the World's first* "Carbide Head"+"Carbide Holder" double face contact connection but, we did not stop there. Careful SWOT analysis of the conventional screw on head products indicated it was PARAMOUNT to re-engineer the carbide head joint connection for the next generation of Exchangeable head products to approach the performance of solid carbide end mills without encountering carbide joint failure due to tensile strength limitations of carbide threads. Therefore, to overcome inherent tensile strength weakness of carbide threads, Mitsubishi Materials Engineers developed a process that enables a SPECIAL STEEL screw joint to be securely incorporated into the BOTH the CARBIDE HEAD and SHANK thus avoiding thread tensile failure common with ground carbide threads. The result for you is a highly reliable connection that can cope with high cutting loads and coolant thru head options. In fact, the iMX connection was specifically designed to excel in high demanding heat resistant Aerospace applications were failure mode is typically attributed to joint rigidity resulting in run-out, deflection and poor tool life. The Economical iMX Series Exchangeable Screw on Head Ends are available in Coolant through and non-coolant configurations and will soon be your default solution to costly solid carbide end mill applications. *According to our own research on exchangeable head end mills Mitsubishi Materials brochures are available for download. Just select appropriate link below: Industry Specific brochures are available for download at http://www.mitsubishicarbide.com/mmus/en/product/catalog/index.html#hand Grade product brochures are available for download at http://www.mitsubishicarbide.com/mmus/en/product/catalog/grade.html Turning insert product brochures are available for download at http://www.mitsubishicarbide.com/mmus/en/product/catalog/turning.html External Turning Tool product brochures are available for download at http://www.mitsubishicarbide.com/mmus/en/product/catalog/tools.html Boring Bar product brochures are available for download at http://www.mitsubishicarbide.com/mmus/en/product/catalog/boring_bar.html Grooving Tools product brochures are available for download at http://www.mitsubishicarbide.com/mmus/en/product/catalog/grooving.html Solid Carbide End Mill product brochures are available for download at http://www.mitsubishicarbide.com/mmus/en/product/catalog/solid_end_mill.html Milling product brochures are available for download at http://www.mitsubishicarbide.com/mmus/en/product/catalog/cutter.html Drilling product brochures are available for download at http://www.mitsubishicarbide.com/mmus/en/product/catalog/drilling.html Mitsubishi Materials USA - Cutting Tools, Social Media Sites: Face book: http://www.facebook.com/MitsubishiMaterials.US.CuttingTools Twitter: http://twitter.com/#!/MMUSCuttingTool YouTube: http://www.youtube.com/user/mitsubishicarbide Additional Resources: Experience Mitsubishi Carbide's Patented Online Catalog with downloadable CAD files http://www.mitsubishicarbide.net/mmus/en/catalogue/index.html More Mitsubishi Cutting Tool Videos can be found at http://www.mitsubishicarbide.com/mmus/en/product/video/index.html Questions please contact: Technical Support at 1-800-486-2341 Or Email MarketingServices@mmus.com Secure technical inquiries can be submitted to Mitsubishi Materials at https://www.mitsubishicarbide.com/mailform/mmus/en/literature/form.html Thank you for taking the time to view this video and please visit Mitsubishi Materials USA at http://www.mmus.com -
0:42iMX Advantage, Mitsubishi Materials Exchangeable Carbide Head with Carbide Shank End Mills
iMX Advantage, Mitsubishi Materials Exchangeable Carbide Head with Carbide Shank End MillsiMX Advantage, Mitsubishi Materials Exchangeable Carbide Head with Carbide Shank End Mills
Mitsubishi Materials iMX series Exchangeable Screw on Head connection features the World's first* "Carbide Head"+"Carbide Holder" double face contact connection but, we did not stop there. Careful SWOT analysis of conventional screw on head products indicated it was paramount to re-think industry standard and engineer a system that does not rely on ground carbide threads to hold the cutting head on an extension. To overcome the weakness in conventional ground thread THINK approach, Mitsubishi Materials Engineers developed a patented process that marries a special steel insert into a "hard material" substrate enabling true carbide face/taper contact and avoiding root tensile failure common to carbide bolt on type connections. The result for you is the iMX Advantage, a highly reliable connection that can cope with high cutting loads and coolant thru capabilities standard. In fact, the iMX connection was specifically designed to excel in high demanding heat resistant Aerospace applications were failure mode is typically attributed to rigidity resulting in deflection, uneven wear, run-out and over all poor tool life. The economical iMX Series Exchangeable Screw on Head Ends are available in coolant through and non-coolant configurations and will soon be your default solution to costly solid carbide end mill applications. *According to our own research on exchangeable head end mills To see and hear iMX in action, click on this YouTube link: https://www.youtube.com/watch?v=PFzrxINKb7s The iMX Advantage, coming to your spindle soon! Mitsubishi Materials brochures are available for download. http://www.mitsubishicarbide.com/mmus/en/product/new_product/index.html -
1:47Mitsubishi Materials iMX Series Exchangeable Carbide Head with Carbide Shank End Mills
Mitsubishi Materials iMX Series Exchangeable Carbide Head with Carbide Shank End MillsMitsubishi Materials iMX Series Exchangeable Carbide Head with Carbide Shank End Mills
Attending IMTS2014, stop by Mitsubishi Materials USA in the West Building booth W-1426 to see our latest cutting tools. Seasoned booth staff will be available to discuss options for fine tuning your spindles and process. As a BONUS, Roush Yates Engines –Official Tooling Partner of Mitsubishi Materials- will have a car and engine in the booth. An official announcement concerning Mitsubishi Materials partnership with Roush Yates Engines will be made in the booth on Sept. 11, 2014 at 11:00 AM with commemorative Tee's being offered –while supplies last- immediately after. See you at IMTS 2104! Cycle Start with Confidence with Mitsubishi Materials cutting tools on your spindle! iMX series Exchangeable Screw on Head Series End mill brochure is available for download at: http://www.mitsubishicarbide.com/mmus/en/whatsnew/2015_1/imx.html iMX series Exchangeable Screw on Head connection features the Worlds first* "Carbide Head"+"Carbide Holder" double face contact connection but, we did not stop there. Careful SWOT analysis of the conventional screw on head products indicated it was PARAMOUNT to re-engineer the carbide head joint connection for the next generation of Exchangeable head products to approach the performance of solid carbide end mills without encountering carbide joint failure due to tensile strength limitations of carbide threads. Therefore, to overcome inherent tensile strength weakness of carbide threads, Mitsubishi Materials Engineers developed a process that enables a SPECIAL STEEL screw joint to be securely incorporated into the BOTH the CARBIDE HEAD and SHANK thus avoiding thread tensile failure common with ground carbide threads. The result for you is a highly reliable connection that can cope with high cutting loads and coolant thru head options. In fact, the iMX connection was specifically designed to excel in high demanding heat resistant Aerospace applications were failure mode is typically attributed to joint rigidity resulting in run-out, deflection and poor tool life. The Economical iMX Series Exchangeable Screw on Head Ends are available in Coolant through and non-coolant configurations and will soon be your default solution to costly solid carbide end mill applications. *According to our own research on exchangeable head end mills Mitsubishi Materials brochures are available for download. Just select appropriate link below: Industry Specific brochures are available for download at http://www.mitsubishicarbide.com/mmus/en/product/catalog/index.html#hand Grade product brochures are available for download at http://www.mitsubishicarbide.com/mmus/en/product/catalog/grade.html Turning insert product brochures are available for download at http://www.mitsubishicarbide.com/mmus/en/product/catalog/turning.html External Turning Tool product brochures are available for download at http://www.mitsubishicarbide.com/mmus/en/product/catalog/tools.html Boring Bar product brochures are available for download at http://www.mitsubishicarbide.com/mmus/en/product/catalog/boring_bar.html Grooving Tools product brochures are available for download at http://www.mitsubishicarbide.com/mmus/en/product/catalog/grooving.html Solid Carbide End Mill product brochures are available for download at http://www.mitsubishicarbide.com/mmus/en/product/catalog/solid_end_mill.html Milling product brochures are available for download at http://www.mitsubishicarbide.com/mmus/en/product/catalog/cutter.html Drilling product brochures are available for download at http://www.mitsubishicarbide.com/mmus/en/product/catalog/drilling.html To see all Mitsubishi Cutting Tool product channels on YouTube, follow link: http://www.youtube.com/user/mitsubishicarbide#g/p Additional Resources: Experience Mitsubishi Carbide's Patented Online Catalog with downloadable CAD files http://www.mitsubishicarbide.net/mmus/en/catalogue/index.html More Mitsubishi Cutting Tool Videos can be found at http://www.mitsubishicarbide.com/mmus/en/product/video/index.html Questions please contact: Technical Support at 1-800-486-2341 Or Email MarketingServices@mmus.com Secure technical inquiries can be submitted to Mitsubishi Materials at https://www.mitsubishicarbide.com/mailform/mmus/en/literature/form.html Thank you for taking the time to view this video and please visit Mitsubishi Materials USA at http://www.mmus.com -
4:44one piece episode 489-shanks ends the war
one piece episode 489-shanks ends the warone piece episode 489-shanks ends the war
-
2:55Jarrete de cordero asado y confitado con cebollitas / Roasted confit shank end of lamb leg
Jarrete de cordero asado y confitado con cebollitas / Roasted confit shank end of lamb legJarrete de cordero asado y confitado con cebollitas / Roasted confit shank end of lamb leg
Suscripción gratuita a los videos. Free subscription: http://full.sc/O2qEiJ Roasted confit leg lamb shank end with little onions Confitaremos los jarretes en aceite de girasol junto a las cebollitas y después los doraremos en el horno. Así conseguiremos que quede jugoso por dentro y crujiente por fuera
-
Shankend bridge swing
-
Shanks Stops the War
Disclaimer: I do not own this anime, all rights belong to its rightful owners. One piece by Toei Animation & Eiichiro Oda Shanks stops the war at Marineford -
Shankend
Shankend Viaduct Clip -
Shankend
-
[HD] Shank - Final Boss & Ending Cinematics (PC)
Shank confronts Cesar. (Angelo is too cool for a dramatic entrance - 3:00) PC Steam Version on a SFIV TE2 FightStick. The fight is focused on entertainment rather than a "Let's Play" or a Speed Run. "Shank" for PS3, XBox 360 and PC (Steam) Betrayed by the only family he ever knew and left for dead it's up to Shank to seek revenge for the death of his beloved at the hands of the underworld's deadliest assassins. Developer: Klei Entertainment Publisher: Electronic Arts -
iMX Advantage, Mitsubishi Materials Exchangeable Carbide Head with Carbide Shank End Mills
Watch, Listen and Learn, Introducing the World's first* "Carbide Head"+"Carbide Holder" double face contact Exchangeable Screw on Head End Mill system with coolant through head capabilities standard. iMX series Exchangeable Screw on Head Series End mill brochure is available for download at: http://www.mitsubishicarbide.com/mmus/en/whatsnew/2015_1/imx.html iMX series Exchangeable Screw on Head connection features the World's first* "Carbide Head"+"Carbide Holder" double face contact connection but, we did not stop there. Careful SWOT analysis of the conventional screw on head products indicated it was PARAMOUNT to re-engineer the carbide head joint connection for the next generation of Exchangeable head products to approach the performance of solid carbide end mills without encountering ... -
iMX Advantage, Mitsubishi Materials Exchangeable Carbide Head with Carbide Shank End Mills
Mitsubishi Materials iMX series Exchangeable Screw on Head connection features the World's first* "Carbide Head"+"Carbide Holder" double face contact connection but, we did not stop there. Careful SWOT analysis of conventional screw on head products indicated it was paramount to re-think industry standard and engineer a system that does not rely on ground carbide threads to hold the cutting head on an extension. To overcome the weakness in conventional ground thread THINK approach, Mitsubishi Materials Engineers developed a patented process that marries a special steel insert into a "hard material" substrate enabling true carbide face/taper contact and avoiding root tensile failure common to carbide bolt on type connections. The result for you is the iMX Advantage, a highly reliable con... -
Mitsubishi Materials iMX Series Exchangeable Carbide Head with Carbide Shank End Mills
Attending IMTS2014, stop by Mitsubishi Materials USA in the West Building booth W-1426 to see our latest cutting tools. Seasoned booth staff will be available to discuss options for fine tuning your spindles and process. As a BONUS, Roush Yates Engines –Official Tooling Partner of Mitsubishi Materials- will have a car and engine in the booth. An official announcement concerning Mitsubishi Materials partnership with Roush Yates Engines will be made in the booth on Sept. 11, 2014 at 11:00 AM with commemorative Tee's being offered –while supplies last- immediately after. See you at IMTS 2104! Cycle Start with Confidence with Mitsubishi Materials cutting tools on your spindle! iMX series Exchangeable Screw on Head Series End mill brochure is available for download at: http://www.mitsub... -
one piece episode 489-shanks ends the war
-
Jarrete de cordero asado y confitado con cebollitas / Roasted confit shank end of lamb leg
Suscripción gratuita a los videos. Free subscription: http://full.sc/O2qEiJ Roasted confit leg lamb shank end with little onions Confitaremos los jarretes en aceite de girasol junto a las cebollitas y después los doraremos en el horno. Así conseguiremos que quede jugoso por dentro y crujiente por fuera
Shankend bridge swing
- Order: Reorder
- Duration: 1:01
- Updated: 04 Oct 2015
- views: 143
- published: 04 Oct 2015
- views: 143
Shanks Stops the War
- Order: Reorder
- Duration: 5:04
- Updated: 16 Jul 2015
- views: 678796
Disclaimer: I do not own this anime, all rights belong to its rightful owners.
One piece by Toei Animation & Eiichiro Oda
Shanks stops the war at Marineford
Disclaimer: I do not own this anime, all rights belong to its rightful owners.
One piece by Toei Animation & Eiichiro Oda
Shanks stops the war at Marineford
wn.com/Shanks Stops The War
Disclaimer: I do not own this anime, all rights belong to its rightful owners.
One piece by Toei Animation & Eiichiro Oda
Shanks stops the war at Marineford
- published: 16 Jul 2015
- views: 678796
Shankend
- Order: Reorder
- Duration: 0:34
- Updated: 19 Jul 2015
- views: 295
Shankend Viaduct Clip
Shankend Viaduct Clip
wn.com/Shankend
Shankend
- Order: Reorder
- Duration: 2:23
- Updated: 11 Apr 2016
- views: 3
- published: 11 Apr 2016
- views: 3
[HD] Shank - Final Boss & Ending Cinematics (PC)
- Order: Reorder
- Duration: 5:24
- Updated: 01 Nov 2010
- views: 34119
Shank confronts Cesar.
(Angelo is too cool for a dramatic entrance - 3:00)
PC Steam Version on a SFIV TE2 FightStick. The fight is focused on entertainment rat...
Shank confronts Cesar.
(Angelo is too cool for a dramatic entrance - 3:00)
PC Steam Version on a SFIV TE2 FightStick. The fight is focused on entertainment rather than a "Let's Play" or a Speed Run.
"Shank" for PS3, XBox 360 and PC (Steam)
Betrayed by the only family he ever knew and left for dead it's up to Shank to seek revenge for the death of his beloved at the hands of the underworld's deadliest assassins.
Developer: Klei Entertainment
Publisher: Electronic Arts
wn.com/Hd Shank Final Boss Ending Cinematics (Pc)
Shank confronts Cesar.
(Angelo is too cool for a dramatic entrance - 3:00)
PC Steam Version on a SFIV TE2 FightStick. The fight is focused on entertainment rather than a "Let's Play" or a Speed Run.
"Shank" for PS3, XBox 360 and PC (Steam)
Betrayed by the only family he ever knew and left for dead it's up to Shank to seek revenge for the death of his beloved at the hands of the underworld's deadliest assassins.
Developer: Klei Entertainment
Publisher: Electronic Arts
- published: 01 Nov 2010
- views: 34119
iMX Advantage, Mitsubishi Materials Exchangeable Carbide Head with Carbide Shank End Mills
- Order: Reorder
- Duration: 1:34
- Updated: 28 Jan 2014
- views: 3417
Watch, Listen and Learn, Introducing the World's first* "Carbide Head"+"Carbide Holder" double face contact Exchangeable Screw on Head End Mill system with cool...
Watch, Listen and Learn, Introducing the World's first* "Carbide Head"+"Carbide Holder" double face contact Exchangeable Screw on Head End Mill system with coolant through head capabilities standard.
iMX series Exchangeable Screw on Head Series End mill brochure is available for download at:
http://www.mitsubishicarbide.com/mmus/en/whatsnew/2015_1/imx.html
iMX series Exchangeable Screw on Head connection features the World's first* "Carbide Head"+"Carbide Holder" double face contact connection but, we did not stop there. Careful SWOT analysis of the conventional screw on head products indicated it was PARAMOUNT to re-engineer the carbide head joint connection for the next generation of Exchangeable head products to approach the performance of solid carbide end mills without encountering carbide joint failure due to tensile strength limitations of carbide threads.
Therefore, to overcome inherent tensile strength weakness of carbide threads, Mitsubishi Materials Engineers developed a process that enables a SPECIAL STEEL screw joint to be securely incorporated into the BOTH the CARBIDE HEAD and SHANK thus avoiding thread tensile failure common with ground carbide threads. The result for you is a highly reliable connection that can cope with high cutting loads and coolant thru head options.
In fact, the iMX connection was specifically designed to excel in high demanding heat resistant Aerospace applications were failure mode is typically attributed to joint rigidity resulting in run-out, deflection and poor tool life. The Economical iMX Series Exchangeable Screw on Head Ends are available in Coolant through and non-coolant configurations and will soon be your default solution to costly solid carbide end mill applications.
*According to our own research on exchangeable head end mills
Mitsubishi Materials brochures are available for download. Just select appropriate link below:
Industry Specific brochures are available for download at
http://www.mitsubishicarbide.com/mmus/en/product/catalog/index.html#hand
Grade product brochures are available for download at http://www.mitsubishicarbide.com/mmus/en/product/catalog/grade.html
Turning insert product brochures are available for download at http://www.mitsubishicarbide.com/mmus/en/product/catalog/turning.html
External Turning Tool product brochures are available for download at http://www.mitsubishicarbide.com/mmus/en/product/catalog/tools.html
Boring Bar product brochures are available for download at http://www.mitsubishicarbide.com/mmus/en/product/catalog/boring_bar.html
Grooving Tools product brochures are available for download at http://www.mitsubishicarbide.com/mmus/en/product/catalog/grooving.html
Solid Carbide End Mill product brochures are available for download at http://www.mitsubishicarbide.com/mmus/en/product/catalog/solid_end_mill.html
Milling product brochures are available for download at http://www.mitsubishicarbide.com/mmus/en/product/catalog/cutter.html
Drilling product brochures are available for download at http://www.mitsubishicarbide.com/mmus/en/product/catalog/drilling.html
Mitsubishi Materials USA - Cutting Tools, Social Media Sites:
Face book: http://www.facebook.com/MitsubishiMaterials.US.CuttingTools
Twitter: http://twitter.com/#!/MMUSCuttingTool
YouTube: http://www.youtube.com/user/mitsubishicarbide
Additional Resources:
Experience Mitsubishi Carbide's Patented Online Catalog with downloadable CAD files http://www.mitsubishicarbide.net/mmus/en/catalogue/index.html
More Mitsubishi Cutting Tool Videos can be found at http://www.mitsubishicarbide.com/mmus/en/product/video/index.html
Questions please contact:
Technical Support at 1-800-486-2341
Or
Email MarketingServices@mmus.com
Secure technical inquiries can be submitted to Mitsubishi Materials at https://www.mitsubishicarbide.com/mailform/mmus/en/literature/form.html
Thank you for taking the time to view this video and please visit Mitsubishi Materials USA at http://www.mmus.com
wn.com/Imx Advantage, Mitsubishi Materials Exchangeable Carbide Head With Carbide Shank End Mills
Watch, Listen and Learn, Introducing the World's first* "Carbide Head"+"Carbide Holder" double face contact Exchangeable Screw on Head End Mill system with coolant through head capabilities standard.
iMX series Exchangeable Screw on Head Series End mill brochure is available for download at:
http://www.mitsubishicarbide.com/mmus/en/whatsnew/2015_1/imx.html
iMX series Exchangeable Screw on Head connection features the World's first* "Carbide Head"+"Carbide Holder" double face contact connection but, we did not stop there. Careful SWOT analysis of the conventional screw on head products indicated it was PARAMOUNT to re-engineer the carbide head joint connection for the next generation of Exchangeable head products to approach the performance of solid carbide end mills without encountering carbide joint failure due to tensile strength limitations of carbide threads.
Therefore, to overcome inherent tensile strength weakness of carbide threads, Mitsubishi Materials Engineers developed a process that enables a SPECIAL STEEL screw joint to be securely incorporated into the BOTH the CARBIDE HEAD and SHANK thus avoiding thread tensile failure common with ground carbide threads. The result for you is a highly reliable connection that can cope with high cutting loads and coolant thru head options.
In fact, the iMX connection was specifically designed to excel in high demanding heat resistant Aerospace applications were failure mode is typically attributed to joint rigidity resulting in run-out, deflection and poor tool life. The Economical iMX Series Exchangeable Screw on Head Ends are available in Coolant through and non-coolant configurations and will soon be your default solution to costly solid carbide end mill applications.
*According to our own research on exchangeable head end mills
Mitsubishi Materials brochures are available for download. Just select appropriate link below:
Industry Specific brochures are available for download at
http://www.mitsubishicarbide.com/mmus/en/product/catalog/index.html#hand
Grade product brochures are available for download at http://www.mitsubishicarbide.com/mmus/en/product/catalog/grade.html
Turning insert product brochures are available for download at http://www.mitsubishicarbide.com/mmus/en/product/catalog/turning.html
External Turning Tool product brochures are available for download at http://www.mitsubishicarbide.com/mmus/en/product/catalog/tools.html
Boring Bar product brochures are available for download at http://www.mitsubishicarbide.com/mmus/en/product/catalog/boring_bar.html
Grooving Tools product brochures are available for download at http://www.mitsubishicarbide.com/mmus/en/product/catalog/grooving.html
Solid Carbide End Mill product brochures are available for download at http://www.mitsubishicarbide.com/mmus/en/product/catalog/solid_end_mill.html
Milling product brochures are available for download at http://www.mitsubishicarbide.com/mmus/en/product/catalog/cutter.html
Drilling product brochures are available for download at http://www.mitsubishicarbide.com/mmus/en/product/catalog/drilling.html
Mitsubishi Materials USA - Cutting Tools, Social Media Sites:
Face book: http://www.facebook.com/MitsubishiMaterials.US.CuttingTools
Twitter: http://twitter.com/#!/MMUSCuttingTool
YouTube: http://www.youtube.com/user/mitsubishicarbide
Additional Resources:
Experience Mitsubishi Carbide's Patented Online Catalog with downloadable CAD files http://www.mitsubishicarbide.net/mmus/en/catalogue/index.html
More Mitsubishi Cutting Tool Videos can be found at http://www.mitsubishicarbide.com/mmus/en/product/video/index.html
Questions please contact:
Technical Support at 1-800-486-2341
Or
Email MarketingServices@mmus.com
Secure technical inquiries can be submitted to Mitsubishi Materials at https://www.mitsubishicarbide.com/mailform/mmus/en/literature/form.html
Thank you for taking the time to view this video and please visit Mitsubishi Materials USA at http://www.mmus.com
- published: 28 Jan 2014
- views: 3417
iMX Advantage, Mitsubishi Materials Exchangeable Carbide Head with Carbide Shank End Mills
- Order: Reorder
- Duration: 0:42
- Updated: 02 Apr 2014
- views: 834
Mitsubishi Materials iMX series Exchangeable Screw on Head connection features the World's first* "Carbide Head"+"Carbide Holder" double face contact connection...
Mitsubishi Materials iMX series Exchangeable Screw on Head connection features the World's first* "Carbide Head"+"Carbide Holder" double face contact connection but, we did not stop there. Careful SWOT analysis of conventional screw on head products indicated it was paramount to re-think industry standard and engineer a system that does not rely on ground carbide threads to hold the cutting head on an extension.
To overcome the weakness in conventional ground thread THINK approach, Mitsubishi Materials Engineers developed a patented process that marries a special steel insert into a "hard material" substrate enabling true carbide face/taper contact and avoiding root tensile failure common to carbide bolt on type connections. The result for you is the iMX Advantage, a highly reliable connection that can cope with high cutting loads and coolant thru capabilities standard.
In fact, the iMX connection was specifically designed to excel in high demanding heat resistant Aerospace applications were failure mode is typically attributed to rigidity resulting in deflection, uneven wear, run-out and over all poor tool life. The economical iMX Series Exchangeable Screw on Head Ends are available in coolant through and non-coolant configurations and will soon be your default solution to costly solid carbide end mill applications. *According to our own research on exchangeable head end mills
To see and hear iMX in action, click on this YouTube link: https://www.youtube.com/watch?v=PFzrxINKb7s
The iMX Advantage, coming to your spindle soon!
Mitsubishi Materials brochures are available for download.
http://www.mitsubishicarbide.com/mmus/en/product/new_product/index.html
wn.com/Imx Advantage, Mitsubishi Materials Exchangeable Carbide Head With Carbide Shank End Mills
Mitsubishi Materials iMX series Exchangeable Screw on Head connection features the World's first* "Carbide Head"+"Carbide Holder" double face contact connection but, we did not stop there. Careful SWOT analysis of conventional screw on head products indicated it was paramount to re-think industry standard and engineer a system that does not rely on ground carbide threads to hold the cutting head on an extension.
To overcome the weakness in conventional ground thread THINK approach, Mitsubishi Materials Engineers developed a patented process that marries a special steel insert into a "hard material" substrate enabling true carbide face/taper contact and avoiding root tensile failure common to carbide bolt on type connections. The result for you is the iMX Advantage, a highly reliable connection that can cope with high cutting loads and coolant thru capabilities standard.
In fact, the iMX connection was specifically designed to excel in high demanding heat resistant Aerospace applications were failure mode is typically attributed to rigidity resulting in deflection, uneven wear, run-out and over all poor tool life. The economical iMX Series Exchangeable Screw on Head Ends are available in coolant through and non-coolant configurations and will soon be your default solution to costly solid carbide end mill applications. *According to our own research on exchangeable head end mills
To see and hear iMX in action, click on this YouTube link: https://www.youtube.com/watch?v=PFzrxINKb7s
The iMX Advantage, coming to your spindle soon!
Mitsubishi Materials brochures are available for download.
http://www.mitsubishicarbide.com/mmus/en/product/new_product/index.html
- published: 02 Apr 2014
- views: 834
Mitsubishi Materials iMX Series Exchangeable Carbide Head with Carbide Shank End Mills
- Order: Reorder
- Duration: 1:47
- Updated: 04 Nov 2013
- views: 4437
Attending IMTS2014, stop by Mitsubishi Materials USA in the West Building booth W-1426 to see our latest cutting tools. Seasoned booth staff will be available t...
Attending IMTS2014, stop by Mitsubishi Materials USA in the West Building booth W-1426 to see our latest cutting tools. Seasoned booth staff will be available to discuss options for fine tuning your spindles and process. As a BONUS, Roush Yates Engines –Official Tooling Partner of Mitsubishi Materials- will have a car and engine in the booth.
An official announcement concerning Mitsubishi Materials partnership with Roush Yates Engines will be made in the booth on Sept. 11, 2014 at 11:00 AM with commemorative Tee's being offered –while supplies last- immediately after. See you at IMTS 2104!
Cycle Start with Confidence with Mitsubishi Materials cutting tools on your spindle!
iMX series Exchangeable Screw on Head Series End mill brochure is available for download at:
http://www.mitsubishicarbide.com/mmus/en/whatsnew/2015_1/imx.html
iMX series Exchangeable Screw on Head connection features the Worlds first* "Carbide Head"+"Carbide Holder" double face contact connection but, we did not stop there. Careful SWOT analysis of the conventional screw on head products indicated it was PARAMOUNT to re-engineer the carbide head joint connection for the next generation of Exchangeable head products to approach the performance of solid carbide end mills without encountering carbide joint failure due to tensile strength limitations of carbide threads.
Therefore, to overcome inherent tensile strength weakness of carbide threads, Mitsubishi Materials Engineers developed a process that enables a SPECIAL STEEL screw joint to be securely incorporated into the BOTH the CARBIDE HEAD and SHANK thus avoiding thread tensile failure common with ground carbide threads. The result for you is a highly reliable connection that can cope with high cutting loads and coolant thru head options.
In fact, the iMX connection was specifically designed to excel in high demanding heat resistant Aerospace applications were failure mode is typically attributed to joint rigidity resulting in run-out, deflection and poor tool life. The Economical iMX Series Exchangeable Screw on Head Ends are available in Coolant through and non-coolant configurations and will soon be your default solution to costly solid carbide end mill applications.
*According to our own research on exchangeable head end mills
Mitsubishi Materials brochures are available for download. Just select appropriate link below:
Industry Specific brochures are available for download at
http://www.mitsubishicarbide.com/mmus/en/product/catalog/index.html#hand
Grade product brochures are available for download at http://www.mitsubishicarbide.com/mmus/en/product/catalog/grade.html
Turning insert product brochures are available for download at http://www.mitsubishicarbide.com/mmus/en/product/catalog/turning.html
External Turning Tool product brochures are available for download at http://www.mitsubishicarbide.com/mmus/en/product/catalog/tools.html
Boring Bar product brochures are available for download at http://www.mitsubishicarbide.com/mmus/en/product/catalog/boring_bar.html
Grooving Tools product brochures are available for download at http://www.mitsubishicarbide.com/mmus/en/product/catalog/grooving.html
Solid Carbide End Mill product brochures are available for download at http://www.mitsubishicarbide.com/mmus/en/product/catalog/solid_end_mill.html
Milling product brochures are available for download at http://www.mitsubishicarbide.com/mmus/en/product/catalog/cutter.html
Drilling product brochures are available for download at http://www.mitsubishicarbide.com/mmus/en/product/catalog/drilling.html
To see all Mitsubishi Cutting Tool product channels on YouTube, follow link: http://www.youtube.com/user/mitsubishicarbide#g/p
Additional Resources:
Experience Mitsubishi Carbide's Patented Online Catalog with downloadable CAD files http://www.mitsubishicarbide.net/mmus/en/catalogue/index.html
More Mitsubishi Cutting Tool Videos can be found at http://www.mitsubishicarbide.com/mmus/en/product/video/index.html
Questions please contact:
Technical Support at 1-800-486-2341
Or
Email MarketingServices@mmus.com
Secure technical inquiries can be submitted to Mitsubishi Materials at https://www.mitsubishicarbide.com/mailform/mmus/en/literature/form.html
Thank you for taking the time to view this video and please visit Mitsubishi Materials USA at http://www.mmus.com
wn.com/Mitsubishi Materials Imx Series Exchangeable Carbide Head With Carbide Shank End Mills
Attending IMTS2014, stop by Mitsubishi Materials USA in the West Building booth W-1426 to see our latest cutting tools. Seasoned booth staff will be available to discuss options for fine tuning your spindles and process. As a BONUS, Roush Yates Engines –Official Tooling Partner of Mitsubishi Materials- will have a car and engine in the booth.
An official announcement concerning Mitsubishi Materials partnership with Roush Yates Engines will be made in the booth on Sept. 11, 2014 at 11:00 AM with commemorative Tee's being offered –while supplies last- immediately after. See you at IMTS 2104!
Cycle Start with Confidence with Mitsubishi Materials cutting tools on your spindle!
iMX series Exchangeable Screw on Head Series End mill brochure is available for download at:
http://www.mitsubishicarbide.com/mmus/en/whatsnew/2015_1/imx.html
iMX series Exchangeable Screw on Head connection features the Worlds first* "Carbide Head"+"Carbide Holder" double face contact connection but, we did not stop there. Careful SWOT analysis of the conventional screw on head products indicated it was PARAMOUNT to re-engineer the carbide head joint connection for the next generation of Exchangeable head products to approach the performance of solid carbide end mills without encountering carbide joint failure due to tensile strength limitations of carbide threads.
Therefore, to overcome inherent tensile strength weakness of carbide threads, Mitsubishi Materials Engineers developed a process that enables a SPECIAL STEEL screw joint to be securely incorporated into the BOTH the CARBIDE HEAD and SHANK thus avoiding thread tensile failure common with ground carbide threads. The result for you is a highly reliable connection that can cope with high cutting loads and coolant thru head options.
In fact, the iMX connection was specifically designed to excel in high demanding heat resistant Aerospace applications were failure mode is typically attributed to joint rigidity resulting in run-out, deflection and poor tool life. The Economical iMX Series Exchangeable Screw on Head Ends are available in Coolant through and non-coolant configurations and will soon be your default solution to costly solid carbide end mill applications.
*According to our own research on exchangeable head end mills
Mitsubishi Materials brochures are available for download. Just select appropriate link below:
Industry Specific brochures are available for download at
http://www.mitsubishicarbide.com/mmus/en/product/catalog/index.html#hand
Grade product brochures are available for download at http://www.mitsubishicarbide.com/mmus/en/product/catalog/grade.html
Turning insert product brochures are available for download at http://www.mitsubishicarbide.com/mmus/en/product/catalog/turning.html
External Turning Tool product brochures are available for download at http://www.mitsubishicarbide.com/mmus/en/product/catalog/tools.html
Boring Bar product brochures are available for download at http://www.mitsubishicarbide.com/mmus/en/product/catalog/boring_bar.html
Grooving Tools product brochures are available for download at http://www.mitsubishicarbide.com/mmus/en/product/catalog/grooving.html
Solid Carbide End Mill product brochures are available for download at http://www.mitsubishicarbide.com/mmus/en/product/catalog/solid_end_mill.html
Milling product brochures are available for download at http://www.mitsubishicarbide.com/mmus/en/product/catalog/cutter.html
Drilling product brochures are available for download at http://www.mitsubishicarbide.com/mmus/en/product/catalog/drilling.html
To see all Mitsubishi Cutting Tool product channels on YouTube, follow link: http://www.youtube.com/user/mitsubishicarbide#g/p
Additional Resources:
Experience Mitsubishi Carbide's Patented Online Catalog with downloadable CAD files http://www.mitsubishicarbide.net/mmus/en/catalogue/index.html
More Mitsubishi Cutting Tool Videos can be found at http://www.mitsubishicarbide.com/mmus/en/product/video/index.html
Questions please contact:
Technical Support at 1-800-486-2341
Or
Email MarketingServices@mmus.com
Secure technical inquiries can be submitted to Mitsubishi Materials at https://www.mitsubishicarbide.com/mailform/mmus/en/literature/form.html
Thank you for taking the time to view this video and please visit Mitsubishi Materials USA at http://www.mmus.com
- published: 04 Nov 2013
- views: 4437
one piece episode 489-shanks ends the war
- Order: Reorder
- Duration: 4:44
- Updated: 14 Jun 2012
- views: 3351604
- published: 14 Jun 2012
- views: 3351604
Jarrete de cordero asado y confitado con cebollitas / Roasted confit shank end of lamb leg
- Order: Reorder
- Duration: 2:55
- Updated: 01 Sep 2011
- views: 2038
Suscripción gratuita a los videos. Free subscription: http://full.sc/O2qEiJ Roasted confit leg lamb shank end with little onions Confitaremos los jarretes en ac...
Suscripción gratuita a los videos. Free subscription: http://full.sc/O2qEiJ Roasted confit leg lamb shank end with little onions Confitaremos los jarretes en aceite de girasol junto a las cebollitas y después los doraremos en el horno. Así conseguiremos que quede jugoso por dentro y crujiente por fuera
wn.com/Jarrete De Cordero Asado Y Confitado Con Cebollitas Roasted Confit Shank End Of Lamb Leg
Suscripción gratuita a los videos. Free subscription: http://full.sc/O2qEiJ Roasted confit leg lamb shank end with little onions Confitaremos los jarretes en aceite de girasol junto a las cebollitas y después los doraremos en el horno. Así conseguiremos que quede jugoso por dentro y crujiente por fuera
- published: 01 Sep 2011
- views: 2038
-
Ghost Stations - Disused Railway Stations in the Scottish Borders, Scotland
Thanks for watching.... 1. Abbotsford Ferry railway station 2. Ayton railway station 3. Belses railway station 4. Bowland railway station 5. Earlston railway station 6. Fountainhall railway station 7. Hassendean railway station 8. Hawick railway station 9. Heriot railway station 10. Melrose railway station 11. Newcastleton railway station 12. Reston railway station 13. Riccarton Junction railway station 14. St. Boswells railway station 15. Saughtree railway station 16. Shankend railway station 17. Steele Road railway station 18. Stobo railway station 19. Stobs railway station Source: https://en.wikipedia.org/wiki/Category:Disused_railway_stations_in_the_Scottish_Borders Music: Wise,Silent Partner; YouTube Audio Library Ghost stations is the usual English translation for the German word... -
Mitsubishi Material’s Ceramic End Mill Debut at JIMTOF 2014
Ceramic Milling product brochures are available for download at http://www.mitsubishicarbide.com/mmus/en/whatsnew/2015_2/ceramic.html JIMTOF 2014 was a very exciting show for MITSUBISHI MATERIALS for at JIMTOF, Mitsubishi Materials worked with YASDA to give the world a sneak preview into some of the near to market Cutting Tool Technology being developed and commercialized to increase your productivity. This demo shown in this video was featured in the YASDA booth during JIMTOF 2014. As for the crowd this demo attracted, standing room only is an understatement. In late 2015, Mitsubishi Materials officially released CERAMIC End Mill Series CE4SRB & CE6SRB to the US Market. Mitsubishi Materials Ceramic corner radius end mills are designed for roughing thru semi-finishing of nickel based ... -
-
1.3 Machine Tool Basics -- Lathe Cutting Tools -- SMITHY GRANITE 3-in-1
http://www.smithy.com (view transcription of video below) Learn about the basics of metal lathe operations using our Smithy Granite combo lathe/mill/drill machines. You can visit us at www.smithy.com for more information or send us any questions about your project. Our trained technicians will be glad to help you with your project. "The selection of a cutting tool is probably the most important decision a machinist can make. We are going to cover some of the basics, but I urge everyone who intends to use the lathe, to learn as much about cutting tools as possible. They are the key to the quality of your work. Lathe tools are made from many different types of materials, in many sizes and styles. The three types we are using today are, from the left, high-speed steel tools, carbide-ti... -
Cutting Speed and RPM on the Lathe and Mill
Proper rpm on the lathe and mill increases tool life and productivity. This lesson discusses how to determine the proper cutting speed for various metals and how to convert that cutting speed to the correct rpm for the tool or part.
Ghost Stations - Disused Railway Stations in the Scottish Borders, Scotland
- Order: Reorder
- Duration: 1:19
- Updated: 27 Sep 2015
- views: 735
Thanks for watching....
1. Abbotsford Ferry railway station
2. Ayton railway station
3. Belses railway station
4. Bowland railway station
5. Earlston railway st...
Thanks for watching....
1. Abbotsford Ferry railway station
2. Ayton railway station
3. Belses railway station
4. Bowland railway station
5. Earlston railway station
6. Fountainhall railway station
7. Hassendean railway station
8. Hawick railway station
9. Heriot railway station
10. Melrose railway station
11. Newcastleton railway station
12. Reston railway station
13. Riccarton Junction railway station
14. St. Boswells railway station
15. Saughtree railway station
16. Shankend railway station
17. Steele Road railway station
18. Stobo railway station
19. Stobs railway station
Source:
https://en.wikipedia.org/wiki/Category:Disused_railway_stations_in_the_Scottish_Borders
Music: Wise,Silent Partner; YouTube Audio Library
Ghost stations is the usual English translation for the German word Geisterbahnhöfe. This term was used to describe certain stations on Berlin's U-Bahn and S-Bahn metro networks that were closed during the period of Berlin's division during the Cold War. Since then, the term has come to be used to describe any disused station on an underground railway line, especially those actively passed through by passenger trains.
An abandoned (or disused) railway station is a building or structure which was constructed to serve as a railway station but has fallen into disuse. There are various circumstances when this may occur - a railway company may fall bankrupt, or the station may be closed due to the failure of economic activitiy such as insufficient passenger numbers, operational reasons such as the diversion or replacement of the line. In some instances, the railway line may continue in operation while the station is closed. Additionally, stations may sometimes be resited along the route of the line to new premises - examples of this include opening a replacement station nearer to the centre of population, or building a larger station on a less restricted site to cope with high passenger numbers.
Notable cases where railway stations have fallen into disuse include the Beeching Axe, a 1960s programme of mass closures of unprofitable railway lines by the British Government. The London Underground system is also noted for its list of closed stations. During the time of the Berlin Wall, a number of Berlin U-Bahn stations on West Berlin lines became "ghost stations" (Geisterbahnhöfe) because they were on lines which passed through East Berlin territory.
Railway stations and lines which fall into disuse may become overgrown. Some former railway lines are repurposed as managed nature reserves, trails or other tourist attractions - for example Hellfire Pass, the route of the former "Death Railway" in Thailand. Many former railways are converted into long-distance cycleways, such as large sections of the National Cycle Network in the United Kingdom. In rural areas, former railway station buildings are often converted into private residences. Examples include many of the stations on the closed Didcot, Newbury and Southampton Railway in England.
Architecturally and historically notable station buildings may present a problem if they are protected under building preservation laws but fall into disuse. Such buildings are often simply demolished (such as Broad Street railway station (London); a similar fate threatens Michigan Central Station), or they may be preserved as part of a heritage railway. Often, in order to be retained as commercially viable structures within an urban environment, or as part of an urban regeneration project, they may be repurposed for alternative activities. Prominent examples include the ornate Gare d'Orsay in Paris, France, which was converted into the Musée d'Orsay art gallery; and Manchester Central railway station which was put to new use first as a car park, and later refurbished as the Manchester Central Conference Centre. The Ottawa Convention Centre is a former station, as are railway museums Memory Junction in Brighton and Railway Museum of Eastern Ontario in Smiths Falls. In Prescott the rail station houses historical society offices; in Lac-Mégantic and Kingston a former station houses a tourism information office. Stations have also been transformed into restaurants or private residences.
Many abandoned railway stations and line are now being brought back into operational service, notably in the UK where environmental policy is driving the reversal of some of the Beeching closures of the 1960s. In London the Docklands Light Railway made use of disused railway infrastructure for much of its construction; in Manchester it is proposed to expand the Metrolink light rail system by re-opening abandoned rail lines; and in Scotland, the Scottish Government has plans to bring the Waverley Line back into passenger service.
wn.com/Ghost Stations Disused Railway Stations In The Scottish Borders, Scotland
Thanks for watching....
1. Abbotsford Ferry railway station
2. Ayton railway station
3. Belses railway station
4. Bowland railway station
5. Earlston railway station
6. Fountainhall railway station
7. Hassendean railway station
8. Hawick railway station
9. Heriot railway station
10. Melrose railway station
11. Newcastleton railway station
12. Reston railway station
13. Riccarton Junction railway station
14. St. Boswells railway station
15. Saughtree railway station
16. Shankend railway station
17. Steele Road railway station
18. Stobo railway station
19. Stobs railway station
Source:
https://en.wikipedia.org/wiki/Category:Disused_railway_stations_in_the_Scottish_Borders
Music: Wise,Silent Partner; YouTube Audio Library
Ghost stations is the usual English translation for the German word Geisterbahnhöfe. This term was used to describe certain stations on Berlin's U-Bahn and S-Bahn metro networks that were closed during the period of Berlin's division during the Cold War. Since then, the term has come to be used to describe any disused station on an underground railway line, especially those actively passed through by passenger trains.
An abandoned (or disused) railway station is a building or structure which was constructed to serve as a railway station but has fallen into disuse. There are various circumstances when this may occur - a railway company may fall bankrupt, or the station may be closed due to the failure of economic activitiy such as insufficient passenger numbers, operational reasons such as the diversion or replacement of the line. In some instances, the railway line may continue in operation while the station is closed. Additionally, stations may sometimes be resited along the route of the line to new premises - examples of this include opening a replacement station nearer to the centre of population, or building a larger station on a less restricted site to cope with high passenger numbers.
Notable cases where railway stations have fallen into disuse include the Beeching Axe, a 1960s programme of mass closures of unprofitable railway lines by the British Government. The London Underground system is also noted for its list of closed stations. During the time of the Berlin Wall, a number of Berlin U-Bahn stations on West Berlin lines became "ghost stations" (Geisterbahnhöfe) because they were on lines which passed through East Berlin territory.
Railway stations and lines which fall into disuse may become overgrown. Some former railway lines are repurposed as managed nature reserves, trails or other tourist attractions - for example Hellfire Pass, the route of the former "Death Railway" in Thailand. Many former railways are converted into long-distance cycleways, such as large sections of the National Cycle Network in the United Kingdom. In rural areas, former railway station buildings are often converted into private residences. Examples include many of the stations on the closed Didcot, Newbury and Southampton Railway in England.
Architecturally and historically notable station buildings may present a problem if they are protected under building preservation laws but fall into disuse. Such buildings are often simply demolished (such as Broad Street railway station (London); a similar fate threatens Michigan Central Station), or they may be preserved as part of a heritage railway. Often, in order to be retained as commercially viable structures within an urban environment, or as part of an urban regeneration project, they may be repurposed for alternative activities. Prominent examples include the ornate Gare d'Orsay in Paris, France, which was converted into the Musée d'Orsay art gallery; and Manchester Central railway station which was put to new use first as a car park, and later refurbished as the Manchester Central Conference Centre. The Ottawa Convention Centre is a former station, as are railway museums Memory Junction in Brighton and Railway Museum of Eastern Ontario in Smiths Falls. In Prescott the rail station houses historical society offices; in Lac-Mégantic and Kingston a former station houses a tourism information office. Stations have also been transformed into restaurants or private residences.
Many abandoned railway stations and line are now being brought back into operational service, notably in the UK where environmental policy is driving the reversal of some of the Beeching closures of the 1960s. In London the Docklands Light Railway made use of disused railway infrastructure for much of its construction; in Manchester it is proposed to expand the Metrolink light rail system by re-opening abandoned rail lines; and in Scotland, the Scottish Government has plans to bring the Waverley Line back into passenger service.
- published: 27 Sep 2015
- views: 735
Mitsubishi Material’s Ceramic End Mill Debut at JIMTOF 2014
- Order: Reorder
- Duration: 3:13
- Updated: 02 Feb 2016
- views: 1563
Ceramic Milling product brochures are available for download at http://www.mitsubishicarbide.com/mmus/en/whatsnew/2015_2/ceramic.html
JIMTOF 2014 was a very ex...
Ceramic Milling product brochures are available for download at http://www.mitsubishicarbide.com/mmus/en/whatsnew/2015_2/ceramic.html
JIMTOF 2014 was a very exciting show for MITSUBISHI MATERIALS for at JIMTOF, Mitsubishi Materials worked with YASDA to give the world a sneak preview into some of the near to market Cutting Tool Technology being developed and commercialized to increase your productivity. This demo shown in this video was featured in the YASDA booth during JIMTOF 2014. As for the crowd this demo attracted, standing room only is an understatement.
In late 2015, Mitsubishi Materials officially released CERAMIC End Mill Series CE4SRB & CE6SRB to the US Market. Mitsubishi Materials Ceramic corner radius end mills are designed for roughing thru semi-finishing of nickel based heat resistant alloys like Inconel®718 and available in 4 and 6 flute options. As can be seen in this video, productivity gains possible with Mitsubishi Ceramic end mill’s in roughing and semi finish operations are just amazing.
Mitsubishi Ceramic End Mills are available in 6, 8, 10 and 12mm diameters with the four flute CE4SRB series capable of efficient slotting in addition to side milling. When preparing to apply CERAMIC end mills cutting strategies to a process for the first time, it is imperative that one reads and understands Ceramic End Mill cutting theory and process precautions out lined in the brochure. If you have questions, please contact your local Mitsubishi Materials District Manager.
To see all Mitsubishi Cutting Tool product channels on YouTube, follow link:
http://www.youtube.com/user/mitsubishicarbide/videos?view=1
Or
Visit one of our product specific channels below:
The Cutting Edge: http://www.youtube.com/playlist?list=PL1CEA67C978F3029D&feature;=view_all
Turning & Boring Channel: http://www.youtube.com/playlist?list=PL0D406ECCFFF53995&feature;=view_all
Milling Channel: http://www.youtube.com/playlist?list=PL648BF1B051AE20F0&feature;=view_all
Drilling Channel: http://www.youtube.com/playlist?list=PL6960075BD195101A&feature;=view_all
Grooving Channel: http://www.youtube.com/playlist?list=PL3AD4CC3127719A38&feature;=view_all
Swiss Tooling Channel: http://www.youtube.com/playlist?list=PL0FBAAF2F0230343C&feature;=view_all
CBN Channel: http://www.youtube.com/playlist?list=PLBB88F97F9A2B5376&feature;=view_all
Solid Carbide End Mill Channel: http://www.youtube.com/playlist?list=PL7A1549BEF477EDDB&feature;=view_all
Mitsubishi Materials USA - Cutting Tools, Social Media Sites:
Facebook: http://www.facebook.com/MitsubishiMaterials.US.CuttingTools
Twitter: http://twitter.com/#!/MMUSCuttingTool
YouTube: http://www.youtube.com/user/mitsubishicarbide
Additional Resources:
Experience Mitsubishi Carbide's Patented Online Catalog with downloadable CAD files http://www.mitsubishicarbide.net/mmus/en/catalogue/index.html
More Mitsubishi Cutting Tool Videos can be found at http://www.mitsubishicarbide.com/mmus/en/product/video/index.html
Questions please contact:
Technical Support at 1-800-486-2341
Or
Email MarketingServices@mmus.com
Secure technical inquires can be submitted to Mitsubishi Materials at https://www.mitsubishicarbide.com/mailform/mmus/en/literature/form.html
Thank you for taking the time to view this video and please visit Mitsubishi Materials USA at http://www.mmus.com
wn.com/Mitsubishi Material’S Ceramic End Mill Debut At Jimtof 2014
Ceramic Milling product brochures are available for download at http://www.mitsubishicarbide.com/mmus/en/whatsnew/2015_2/ceramic.html
JIMTOF 2014 was a very exciting show for MITSUBISHI MATERIALS for at JIMTOF, Mitsubishi Materials worked with YASDA to give the world a sneak preview into some of the near to market Cutting Tool Technology being developed and commercialized to increase your productivity. This demo shown in this video was featured in the YASDA booth during JIMTOF 2014. As for the crowd this demo attracted, standing room only is an understatement.
In late 2015, Mitsubishi Materials officially released CERAMIC End Mill Series CE4SRB & CE6SRB to the US Market. Mitsubishi Materials Ceramic corner radius end mills are designed for roughing thru semi-finishing of nickel based heat resistant alloys like Inconel®718 and available in 4 and 6 flute options. As can be seen in this video, productivity gains possible with Mitsubishi Ceramic end mill’s in roughing and semi finish operations are just amazing.
Mitsubishi Ceramic End Mills are available in 6, 8, 10 and 12mm diameters with the four flute CE4SRB series capable of efficient slotting in addition to side milling. When preparing to apply CERAMIC end mills cutting strategies to a process for the first time, it is imperative that one reads and understands Ceramic End Mill cutting theory and process precautions out lined in the brochure. If you have questions, please contact your local Mitsubishi Materials District Manager.
To see all Mitsubishi Cutting Tool product channels on YouTube, follow link:
http://www.youtube.com/user/mitsubishicarbide/videos?view=1
Or
Visit one of our product specific channels below:
The Cutting Edge: http://www.youtube.com/playlist?list=PL1CEA67C978F3029D&feature;=view_all
Turning & Boring Channel: http://www.youtube.com/playlist?list=PL0D406ECCFFF53995&feature;=view_all
Milling Channel: http://www.youtube.com/playlist?list=PL648BF1B051AE20F0&feature;=view_all
Drilling Channel: http://www.youtube.com/playlist?list=PL6960075BD195101A&feature;=view_all
Grooving Channel: http://www.youtube.com/playlist?list=PL3AD4CC3127719A38&feature;=view_all
Swiss Tooling Channel: http://www.youtube.com/playlist?list=PL0FBAAF2F0230343C&feature;=view_all
CBN Channel: http://www.youtube.com/playlist?list=PLBB88F97F9A2B5376&feature;=view_all
Solid Carbide End Mill Channel: http://www.youtube.com/playlist?list=PL7A1549BEF477EDDB&feature;=view_all
Mitsubishi Materials USA - Cutting Tools, Social Media Sites:
Facebook: http://www.facebook.com/MitsubishiMaterials.US.CuttingTools
Twitter: http://twitter.com/#!/MMUSCuttingTool
YouTube: http://www.youtube.com/user/mitsubishicarbide
Additional Resources:
Experience Mitsubishi Carbide's Patented Online Catalog with downloadable CAD files http://www.mitsubishicarbide.net/mmus/en/catalogue/index.html
More Mitsubishi Cutting Tool Videos can be found at http://www.mitsubishicarbide.com/mmus/en/product/video/index.html
Questions please contact:
Technical Support at 1-800-486-2341
Or
Email MarketingServices@mmus.com
Secure technical inquires can be submitted to Mitsubishi Materials at https://www.mitsubishicarbide.com/mailform/mmus/en/literature/form.html
Thank you for taking the time to view this video and please visit Mitsubishi Materials USA at http://www.mmus.com
- published: 02 Feb 2016
- views: 1563
Mitsubishi Electric High Speed Drill and Tap
- Order: Reorder
- Duration: 0:46
- Updated: 25 Oct 2012
- views: 574
High-Speed Drill and Tap -- This demo is showing the capabilities of our Medium to Low to Medium end control M70V. We have the capabilities of using this contro...
High-Speed Drill and Tap -- This demo is showing the capabilities of our Medium to Low to Medium end control M70V. We have the capabilities of using this control for machining center,Drill tap, and mold and die machines.
wn.com/Mitsubishi Electric High Speed Drill And Tap
1.3 Machine Tool Basics -- Lathe Cutting Tools -- SMITHY GRANITE 3-in-1
- Order: Reorder
- Duration: 4:06
- Updated: 15 May 2010
- views: 775861
http://www.smithy.com (view transcription of video below)
Learn about the basics of metal lathe operations using our Smithy Granite combo lathe/mill/drill m...
http://www.smithy.com (view transcription of video below)
Learn about the basics of metal lathe operations using our Smithy Granite combo lathe/mill/drill machines. You can visit us at www.smithy.com for more information or send us any questions about your project. Our trained technicians will be glad to help you with your project.
"The selection of a cutting tool is probably the most important decision a machinist can make. We are going to cover some of the basics, but I urge everyone who intends to use the lathe, to learn as much about cutting tools as possible. They are the key to the quality of your work. Lathe tools are made from many different types of materials, in many sizes and styles. The three types we are using today are, from the left, high-speed steel tools, carbide-tipped tools, and on the right, carbide-insert tools.
High-speed steel tools can be used on many turning operations, on all but the toughest alloys. The tools are sold as blanks in many sizes and grades. The machinist grinds the point of the tool depending on the type of metal he is cutting and the type of turning operation he intends to do. A good machinist's handbook will give you the standard guidelines for grinding high-speed steel tools.
The cutting edge of a carbide-tipped tool is brazed to the end of a steel shank. The shape of the cutting edge, it's profile and cutting angles, are manufactured into the tool. A little cleanup on a green wheel, a silicone carbide grinding wheel, and the tool is ready to go. Cemented carbide will handle much more heat than high-speed steel, so carbide tools are able to cut tougher metals, and cut at higher speeds.
Cemented carbide is also used to make small inserts that are clamped to a tool shank. This style insert is manufactured with a cutting edge on each of its three sides. After an edge is dulled, the insert can be unclamped and rotated to the next side. After all the edges are dulled, the insert is thrown away and replaced by a new one. Although this type of cutting tool was designed for the demands of the high production work, it's really a great tool for the beginner because it allows even the person with little or no tool sharpening experience the ability to easily maintain a properly formed, sharp tool.
No matter what type of material the cutting tool is made of, it's the shape of the tool that determines how it can be used. The profile of the tool's point determines the type of cut the tool is designed to make. The location on the cutting edge on the point of the tool determines the direction that the tool will cut. Turning and facing tools are either right- or left-hand tools depending on which side of the tool shank the cutting edge is ground. Right-hand tools cut from right to left because the cutting edge is on the left side of the tool's point. Facing from the center of a part to the outer edge cutting right to left, requires a right-hand facing tool. Left-hand turning and facing tools cut from left to right, cutting away from the headstock in a turning operation, or from the outer edge to the center, in a facing operation. The cutting edges on these tools are on the right side of the tool's point.
Sending a tool straight into a work piece is called a plunge cut. This type of cut requires a tool that has the cutting edge square on the nose of the tool.
Here we are using a high-speed steel cutoff blade and holder.
The position of the tool in the tool holder is very important. Tools should always be placed as far into the tool holder as possible. To give the cutting edge adequate support, and to reduce the possibility of the tool vibrating. In the case of a boring tool, only the length needed to clear the hole should extend out beyond the tool holder. The height of the tool should be set to match the center of the lathe axis. A lathe center placed in the tailstock can be used as a gauge to set the height. On this tool holder, shims and spacers are used to raise the tool. The tailstock is also used as a tool holder for drilling, reaming, counter-sinking and thread-tapping operations on the lathe."
wn.com/1.3 Machine Tool Basics Lathe Cutting Tools Smithy Granite 3 In 1
http://www.smithy.com (view transcription of video below)
Learn about the basics of metal lathe operations using our Smithy Granite combo lathe/mill/drill machines. You can visit us at www.smithy.com for more information or send us any questions about your project. Our trained technicians will be glad to help you with your project.
"The selection of a cutting tool is probably the most important decision a machinist can make. We are going to cover some of the basics, but I urge everyone who intends to use the lathe, to learn as much about cutting tools as possible. They are the key to the quality of your work. Lathe tools are made from many different types of materials, in many sizes and styles. The three types we are using today are, from the left, high-speed steel tools, carbide-tipped tools, and on the right, carbide-insert tools.
High-speed steel tools can be used on many turning operations, on all but the toughest alloys. The tools are sold as blanks in many sizes and grades. The machinist grinds the point of the tool depending on the type of metal he is cutting and the type of turning operation he intends to do. A good machinist's handbook will give you the standard guidelines for grinding high-speed steel tools.
The cutting edge of a carbide-tipped tool is brazed to the end of a steel shank. The shape of the cutting edge, it's profile and cutting angles, are manufactured into the tool. A little cleanup on a green wheel, a silicone carbide grinding wheel, and the tool is ready to go. Cemented carbide will handle much more heat than high-speed steel, so carbide tools are able to cut tougher metals, and cut at higher speeds.
Cemented carbide is also used to make small inserts that are clamped to a tool shank. This style insert is manufactured with a cutting edge on each of its three sides. After an edge is dulled, the insert can be unclamped and rotated to the next side. After all the edges are dulled, the insert is thrown away and replaced by a new one. Although this type of cutting tool was designed for the demands of the high production work, it's really a great tool for the beginner because it allows even the person with little or no tool sharpening experience the ability to easily maintain a properly formed, sharp tool.
No matter what type of material the cutting tool is made of, it's the shape of the tool that determines how it can be used. The profile of the tool's point determines the type of cut the tool is designed to make. The location on the cutting edge on the point of the tool determines the direction that the tool will cut. Turning and facing tools are either right- or left-hand tools depending on which side of the tool shank the cutting edge is ground. Right-hand tools cut from right to left because the cutting edge is on the left side of the tool's point. Facing from the center of a part to the outer edge cutting right to left, requires a right-hand facing tool. Left-hand turning and facing tools cut from left to right, cutting away from the headstock in a turning operation, or from the outer edge to the center, in a facing operation. The cutting edges on these tools are on the right side of the tool's point.
Sending a tool straight into a work piece is called a plunge cut. This type of cut requires a tool that has the cutting edge square on the nose of the tool.
Here we are using a high-speed steel cutoff blade and holder.
The position of the tool in the tool holder is very important. Tools should always be placed as far into the tool holder as possible. To give the cutting edge adequate support, and to reduce the possibility of the tool vibrating. In the case of a boring tool, only the length needed to clear the hole should extend out beyond the tool holder. The height of the tool should be set to match the center of the lathe axis. A lathe center placed in the tailstock can be used as a gauge to set the height. On this tool holder, shims and spacers are used to raise the tool. The tailstock is also used as a tool holder for drilling, reaming, counter-sinking and thread-tapping operations on the lathe."
- published: 15 May 2010
- views: 775861
Cutting Speed and RPM on the Lathe and Mill
- Order: Reorder
- Duration: 9:52
- Updated: 01 Oct 2013
- views: 189079
Proper rpm on the lathe and mill increases tool life and productivity. This lesson discusses how to determine the proper cutting speed for various metals and ho...
Proper rpm on the lathe and mill increases tool life and productivity. This lesson discusses how to determine the proper cutting speed for various metals and how to convert that cutting speed to the correct rpm for the tool or part.
wn.com/Cutting Speed And Rpm On The Lathe And Mill
Proper rpm on the lathe and mill increases tool life and productivity. This lesson discusses how to determine the proper cutting speed for various metals and how to convert that cutting speed to the correct rpm for the tool or part.
- published: 01 Oct 2013
- views: 189079
close fullscreen
- Playlist
- Chat
close fullscreen
- Playlist
- Chat
1:01
Shankend bridge swing
published: 04 Oct 2015
Shankend bridge swing
Shankend bridge swing
- Report rights infringement
- published: 04 Oct 2015
- views: 143
5:04
Shanks Stops the War
Disclaimer: I do not own this anime, all rights belong to its rightful owners.
One piece ...
published: 16 Jul 2015
Shanks Stops the War
Shanks Stops the War
- Report rights infringement
- published: 16 Jul 2015
- views: 678796
2:23
Shankend
published: 11 Apr 2016
Shankend
Shankend
- Report rights infringement
- published: 11 Apr 2016
- views: 3
5:24
[HD] Shank - Final Boss & Ending Cinematics (PC)
Shank confronts Cesar.
(Angelo is too cool for a dramatic entrance - 3:00)
PC Steam Versi...
published: 01 Nov 2010
[HD] Shank - Final Boss & Ending Cinematics (PC)
[HD] Shank - Final Boss & Ending Cinematics (PC)
- Report rights infringement
- published: 01 Nov 2010
- views: 34119
1:34
iMX Advantage, Mitsubishi Materials Exchangeable Carbide Head with Carbide Shank End Mills
Watch, Listen and Learn, Introducing the World's first* "Carbide Head"+"Carbide Holder" do...
published: 28 Jan 2014
iMX Advantage, Mitsubishi Materials Exchangeable Carbide Head with Carbide Shank End Mills
iMX Advantage, Mitsubishi Materials Exchangeable Carbide Head with Carbide Shank End Mills
- Report rights infringement
- published: 28 Jan 2014
- views: 3417
0:42
iMX Advantage, Mitsubishi Materials Exchangeable Carbide Head with Carbide Shank End Mills
Mitsubishi Materials iMX series Exchangeable Screw on Head connection features the World's...
published: 02 Apr 2014
iMX Advantage, Mitsubishi Materials Exchangeable Carbide Head with Carbide Shank End Mills
iMX Advantage, Mitsubishi Materials Exchangeable Carbide Head with Carbide Shank End Mills
- Report rights infringement
- published: 02 Apr 2014
- views: 834
1:47
Mitsubishi Materials iMX Series Exchangeable Carbide Head with Carbide Shank End Mills
Attending IMTS2014, stop by Mitsubishi Materials USA in the West Building booth W-1426 to ...
published: 04 Nov 2013
Mitsubishi Materials iMX Series Exchangeable Carbide Head with Carbide Shank End Mills
Mitsubishi Materials iMX Series Exchangeable Carbide Head with Carbide Shank End Mills
- Report rights infringement
- published: 04 Nov 2013
- views: 4437
4:44
one piece episode 489-shanks ends the war
published: 14 Jun 2012
one piece episode 489-shanks ends the war
one piece episode 489-shanks ends the war
- Report rights infringement
- published: 14 Jun 2012
- views: 3351604
2:55
Jarrete de cordero asado y confitado con cebollitas / Roasted confit shank end of lamb leg
Suscripción gratuita a los videos. Free subscription: http://full.sc/O2qEiJ Roasted confit...
published: 01 Sep 2011
Jarrete de cordero asado y confitado con cebollitas / Roasted confit shank end of lamb leg
Jarrete de cordero asado y confitado con cebollitas / Roasted confit shank end of lamb leg
- Report rights infringement
- published: 01 Sep 2011
- views: 2038
close fullscreen
- Playlist
- Chat
1:19
Ghost Stations - Disused Railway Stations in the Scottish Borders, Scotland
Thanks for watching....
1. Abbotsford Ferry railway station
2. Ayton railway station
3. Be...
published: 27 Sep 2015
Ghost Stations - Disused Railway Stations in the Scottish Borders, Scotland
Ghost Stations - Disused Railway Stations in the Scottish Borders, Scotland
- Report rights infringement
- published: 27 Sep 2015
- views: 735
3:13
Mitsubishi Material’s Ceramic End Mill Debut at JIMTOF 2014
Ceramic Milling product brochures are available for download at http://www.mitsubishicarbi...
published: 02 Feb 2016
Mitsubishi Material’s Ceramic End Mill Debut at JIMTOF 2014
Mitsubishi Material’s Ceramic End Mill Debut at JIMTOF 2014
- Report rights infringement
- published: 02 Feb 2016
- views: 1563
0:46
Mitsubishi Electric High Speed Drill and Tap
High-Speed Drill and Tap -- This demo is showing the capabilities of our Medium to Low to ...
published: 25 Oct 2012
Mitsubishi Electric High Speed Drill and Tap
Mitsubishi Electric High Speed Drill and Tap
- Report rights infringement
- published: 25 Oct 2012
- views: 574
4:06
1.3 Machine Tool Basics -- Lathe Cutting Tools -- SMITHY GRANITE 3-in-1
http://www.smithy.com (view transcription of video below)
Learn about the basics of me...
published: 15 May 2010
1.3 Machine Tool Basics -- Lathe Cutting Tools -- SMITHY GRANITE 3-in-1
1.3 Machine Tool Basics -- Lathe Cutting Tools -- SMITHY GRANITE 3-in-1
- Report rights infringement
- published: 15 May 2010
- views: 775861
9:52
Cutting Speed and RPM on the Lathe and Mill
Proper rpm on the lathe and mill increases tool life and productivity. This lesson discuss...
published: 01 Oct 2013
Cutting Speed and RPM on the Lathe and Mill
Cutting Speed and RPM on the Lathe and Mill
- Report rights infringement
- published: 01 Oct 2013
- views: 189079
Ghost Stations - Disused Railway Stations in the S...
Mitsubishi Material’s Ceramic End Mill Debut at JI...
Mitsubishi Electric High Speed Drill and Tap...
1.3 Machine Tool Basics -- Lathe Cutting Tools -- ...
