- published: 13 Sep 2015
- views: 25246
Create your page here
-
remove the playlistAnsys
- remove the playlistAnsys
back to playlist
ANSYS 15 Workbench Static Structural - Simply Supported Square Section Beam with uniformly distributed load - Tutorial Workshop for beginners.
This tutorials shows how to use geometry modeler, mesh convergence, stress and deformation along a path, section cuts or section views, undeformed shape, report generation, etc.
Comparing results with hand calculations for the maximum beam deflection, maximum beam bending stress in tension and compression, neutral axis results, shear stress results.
LINK TO XLS SHEET: http://sh.st/nP5QR
Please dontate via paypal for support!: drdalyo@gmail.com
This lesson covers the basics of FEA with ANSYS and a very simple example which demonstrates the steps required to run an analysis in ANSYS.
------
Few Notes:
- Somehow, the software I was using to capture was doing smart focusing that I was unaware of. This helps better quality in smaller video size, but may be bothering in some cases. I will try to turn this feature off for future videos.
- While watching the video, I realized couple of my mistakes, such as typos or saying 1 meters. Oops, I will be more careful in next videos.
- This video is pretty lengthy for it covers two topics: introduction to ANSYS and an example. Your patience is highly appreciated!
- Please leave comments, ideas and question. They will help me to produce more helpful videos.
- published: 06 Jan 2013
- views: 202635
ANSYS Workbench 17.0 Tutorial for a Non Linear Plastic Deformation Cantilever I-Beam with uniform varying load. In this tutorial I will go over the different plasticity models such as bilinear and multilinear isotropic hardening and how to get plastic deformation results in ANSYS 17.0. We will go over built in cross-sections, modeling of an I-Beam (or American Wide Flange Beam, W Beam), use of substeps and multistep problem creation, creating a stress-strain chart plot of the results with unloading, cross-section views and finally report generation.
- published: 14 Feb 2016
- views: 3558
Introductory webinar for ANSYS Workbench Mechanical, v15.0.7. This is Part 1 of a two-part series hosted by SimuTech engineers. It is an abbreviated session from what is normally conducted in a formal classroom training situation.
These quick-start sessions are scheduled throughout the year and are free. Contact me if you'd like to sign up for one. CFD quick-start sessions are also available (free also).
- published: 07 Aug 2015
- views: 5752
ANSYS Workbench Tutorial Video on Bolt Pretension Fastener or Bolt & nut Contact Non Linear FE Analysis | Metric units| Time stepping | Contact Status & Formulation | Gauss Point detection method | Mesh Refinement | Steel Material Assignment | Isotropic Hardening | Density Yield Tangent and Young Modulus | Creo to ANSYS IGES import & edit | Apply Force & Constraints | Plotting Result for Stress Strain Deflection Contact Pressure & Animation |
For more Tutorial Videos Click on the link below
ANSYS Workbench
https://www.youtube.com/playlist?list=PLOahOE6DpL4qq_QxPHieAeVejzDP1yIYW
ANSYS Multiphysics
https://www.youtube.com/playlist?list=PLOahOE6DpL4qojPO7_GkgkVC-cB8KFMeC
Hypermesh
https://www.youtube.com/playlist?list=PLOahOE6DpL4puVylWdpHWRoGhIfswDc6T
Creo Simulate | Pro Mechanica |
https://www.youtube.com/playlist?list=PLOahOE6DpL4qvb2Z0Ir8SwvUyv0qnRGH4
Creo Parametric Tutorial
https://www.youtube.com/playlist?list=PLC1voSxuLSym29Dt_xNnIJxBCtE-k9iul
Pro E Wildfire Tutorial
https://www.youtube.com/playlist?list=PLLBsoJO8DYcVGLa_se2y5Ao0Vzwy6TUbz
For online training on ANSYS Workbench | Creo Parametric & Simulate | Pro E Wildfire & Mechanica | HyperMesh |
Contact: engineeringtutorsdesk@gmail.com
- published: 22 Dec 2014
- views: 35479
ANSYS Workbench Tutorial using Static Structural to model a RC Beam (Reinforced Concrete Beam). Failed elements or cracked and crushed elements are shown using the PLCRACK command. Deformation of the Rebar can also be outputted. This is a four point bending test of concrete.
Command Files DOWNLOAD: http://sh.st/nP5iZ
- published: 03 Jan 2016
- views: 1357
ANSYS Workbench Tutorial Video on Fatigue analysis | For queries send message on skype ID: engineeringtutorsdesk or mail engineeringtutorsdesk@gmail.com | This video will take you through how to evaluate the fatigue failure and the fatigue analysis methods, high cycle fatigue, low cycle fatigue, stress life fatigue analysis, strain life fatigue analysis, fracture mechanics, SN curve for structural steel, Alternating stress vs Number of cycles, What is fatigue life, fatigue damage, Fatigue Safety Factor, Bi Axiality, Sensitivity Curve, What are the Mean Stress correction Theory, Goodman equation in Fatigue analysis, Von Mises Stress approach for fatigue analysis, Fatigue Strength Correction Factor
- published: 03 Nov 2015
- views: 8118
Introductory webinar for using Contact features in ANSYS Workbench Mechanical, v15.0.7.
- published: 16 Dec 2014
- views: 18931
ANSYS, Inc. (NASDAQ: ANSS) is an engineering simulation software (computer-aided engineering, or CAE) developer that is headquartered south of Pittsburgh in Canonsburg, Pennsylvania, United States.
ANSYS was listed on the NASDAQ stock exchange in 1996. In late 2011, Investor's Business Daily ranked ANSYS as one of only six technology businesses worldwide to receive the highest possible score on its SmartSelect Composite Ratings. ANSYS has been recognized as a strong performer by a number of other sources as well. The organization reinvests 15 percent of its revenues each year into research to continually refine the software.
ANSYS offers a comprehensive range of engineering simulation solution sets providing access to virtually any field of engineering simulation that a design process requires. Companies in a wide variety of industries use ANSYS software. The tools put a virtual product through a rigorous testing procedure (such as crashing a car into a brick wall, or running for several years on a tarmac road) before it becomes a physical object.
This page contains text from Wikipedia, the Free Encyclopedia -
http://en.wikipedia.org/wiki/Ansys
This article is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License, which means that you can copy and modify it as long as the entire work (including additions) remains under this license.
This article is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License, which means that you can copy and modify it as long as the entire work (including additions) remains under this license.
- Loading...
-
19:24ANSYS Workbench Tutorial - Simply Supported Beam - PART 1
ANSYS Workbench Tutorial - Simply Supported Beam - PART 1ANSYS Workbench Tutorial - Simply Supported Beam - PART 1
ANSYS 15 Workbench Static Structural - Simply Supported Square Section Beam with uniformly distributed load - Tutorial Workshop for beginners. This tutorials shows how to use geometry modeler, mesh convergence, stress and deformation along a path, section cuts or section views, undeformed shape, report generation, etc. Comparing results with hand calculations for the maximum beam deflection, maximum beam bending stress in tension and compression, neutral axis results, shear stress results. LINK TO XLS SHEET: http://sh.st/nP5QR Please dontate via paypal for support!: drdalyo@gmail.com -
39:21ANSYS - Lesson 01: Basics and a Simple Example
ANSYS - Lesson 01: Basics and a Simple ExampleANSYS - Lesson 01: Basics and a Simple Example
This lesson covers the basics of FEA with ANSYS and a very simple example which demonstrates the steps required to run an analysis in ANSYS. ------ Few Notes: - Somehow, the software I was using to capture was doing smart focusing that I was unaware of. This helps better quality in smaller video size, but may be bothering in some cases. I will try to turn this feature off for future videos. - While watching the video, I realized couple of my mistakes, such as typos or saying 1 meters. Oops, I will be more careful in next videos. - This video is pretty lengthy for it covers two topics: introduction to ANSYS and an example. Your patience is highly appreciated! - Please leave comments, ideas and question. They will help me to produce more helpful videos. -
18:44ANSYS 17.0 Tutorial - Non Linear Plastic Deformation I-Beam
ANSYS 17.0 Tutorial - Non Linear Plastic Deformation I-BeamANSYS 17.0 Tutorial - Non Linear Plastic Deformation I-Beam
ANSYS Workbench 17.0 Tutorial for a Non Linear Plastic Deformation Cantilever I-Beam with uniform varying load. In this tutorial I will go over the different plasticity models such as bilinear and multilinear isotropic hardening and how to get plastic deformation results in ANSYS 17.0. We will go over built in cross-sections, modeling of an I-Beam (or American Wide Flange Beam, W Beam), use of substeps and multistep problem creation, creating a stress-strain chart plot of the results with unloading, cross-section views and finally report generation. -
208:30Introduction to ANSYS Workbench (abbreviated session)
Introduction to ANSYS Workbench (abbreviated session)Introduction to ANSYS Workbench (abbreviated session)
Introductory webinar for ANSYS Workbench Mechanical, v15.0.7. This is Part 1 of a two-part series hosted by SimuTech engineers. It is an abbreviated session from what is normally conducted in a formal classroom training situation. These quick-start sessions are scheduled throughout the year and are free. Contact me if you'd like to sign up for one. CFD quick-start sessions are also available (free also). -
6:50Ansys workbench and using LSDYNA Soda can crush Explicit Dynamics analysis
Ansys workbench and using LSDYNA Soda can crush Explicit Dynamics analysis -
11:36fluent ansys analysis
fluent ansys analysisfluent ansys analysis
Air flow in car analysis using FLUENT ( CFD ) -
22:49ANSYS Workbench Tutorial Video | Bolt Pretension | Contact Non Linear FE Analysis | GRS |
ANSYS Workbench Tutorial Video | Bolt Pretension | Contact Non Linear FE Analysis | GRS |ANSYS Workbench Tutorial Video | Bolt Pretension | Contact Non Linear FE Analysis | GRS |
ANSYS Workbench Tutorial Video on Bolt Pretension Fastener or Bolt & nut Contact Non Linear FE Analysis | Metric units| Time stepping | Contact Status & Formulation | Gauss Point detection method | Mesh Refinement | Steel Material Assignment | Isotropic Hardening | Density Yield Tangent and Young Modulus | Creo to ANSYS IGES import & edit | Apply Force & Constraints | Plotting Result for Stress Strain Deflection Contact Pressure & Animation | For more Tutorial Videos Click on the link below ANSYS Workbench https://www.youtube.com/playlist?list=PLOahOE6DpL4qq_QxPHieAeVejzDP1yIYW ANSYS Multiphysics https://www.youtube.com/playlist?list=PLOahOE6DpL4qojPO7_GkgkVC-cB8KFMeC Hypermesh https://www.youtube.com/playlist?list=PLOahOE6DpL4puVylWdpHWRoGhIfswDc6T Creo Simulate | Pro Mechanica | https://www.youtube.com/playlist?list=PLOahOE6DpL4qvb2Z0Ir8SwvUyv0qnRGH4 Creo Parametric Tutorial https://www.youtube.com/playlist?list=PLC1voSxuLSym29Dt_xNnIJxBCtE-k9iul Pro E Wildfire Tutorial https://www.youtube.com/playlist?list=PLLBsoJO8DYcVGLa_se2y5Ao0Vzwy6TUbz For online training on ANSYS Workbench | Creo Parametric & Simulate | Pro E Wildfire & Mechanica | HyperMesh | Contact: engineeringtutorsdesk@gmail.com -
16:37ANSYS Reinforced Concrete Beam (RC BEAM) - Static Structural
ANSYS Reinforced Concrete Beam (RC BEAM) - Static StructuralANSYS Reinforced Concrete Beam (RC BEAM) - Static Structural
ANSYS Workbench Tutorial using Static Structural to model a RC Beam (Reinforced Concrete Beam). Failed elements or cracked and crushed elements are shown using the PLCRACK command. Deformation of the Rebar can also be outputted. This is a four point bending test of concrete. Command Files DOWNLOAD: http://sh.st/nP5iZ -
29:01Fatigue Analysis in ANSYS | Fatigue Failure | HCF High Cycle & LCF Low Cycle Fatigue Life | GRS |
Fatigue Analysis in ANSYS | Fatigue Failure | HCF High Cycle & LCF Low Cycle Fatigue Life | GRS |Fatigue Analysis in ANSYS | Fatigue Failure | HCF High Cycle & LCF Low Cycle Fatigue Life | GRS |
ANSYS Workbench Tutorial Video on Fatigue analysis | For queries send message on skype ID: engineeringtutorsdesk or mail engineeringtutorsdesk@gmail.com | This video will take you through how to evaluate the fatigue failure and the fatigue analysis methods, high cycle fatigue, low cycle fatigue, stress life fatigue analysis, strain life fatigue analysis, fracture mechanics, SN curve for structural steel, Alternating stress vs Number of cycles, What is fatigue life, fatigue damage, Fatigue Safety Factor, Bi Axiality, Sensitivity Curve, What are the Mean Stress correction Theory, Goodman equation in Fatigue analysis, Von Mises Stress approach for fatigue analysis, Fatigue Strength Correction Factor -
47:03Modeling Contact in ANSYS Workbench
Modeling Contact in ANSYS WorkbenchModeling Contact in ANSYS Workbench
Introductory webinar for using Contact features in ANSYS Workbench Mechanical, v15.0.7.
- Aerodynamics
- Alcoa
- Allegheny Energy
- Ampco Pittsburgh
- Ansys
- ANSYS CFX
- ANSYS FLUENT
- ANSYS Multiphysics
- ANSYS Workbench
- ANSYS, Inc.
- Asset
- Atlas America
- Bayer USA
- Calgon Carbon
- CFX
- ChemADVISOR, Inc.
- Compunetix
- Computer software
- Consol Energy
- Dollar Bank
- DQE
- Dreyfus Corporation
- Dyson
- Eat'n Park
- Eaton Corporation
- EDMC
- EQT
- Equity (finance)
- Esterel Technologies
- Federated Investors
- FedEx Ground
- Fortune 1000
- Fortune 500
- Giant Eagle
- GlaxoSmithKline
- Guru.com
- H. J. Heinz Company
- HFSS
- Highmark
- IGate
- II-VI Incorporated
- John A. Swanson
- Kennametal
- Koppers
- LANXESS
- Mellon Financial
- Millcraft Industries
- ModCloth
- Mylan
- NASDAQ
- Net income
- NOVA Chemicals
- Oxford Development
- Peter J. Smith
- Pittsburgh
- PPG Industries
- PTC Alliance
- Public company
- Red Bull Racing
- Respironics
- Rue21
- SASI
- Speedo
- Terrafugia
- Ticker symbol
- Toyota
- U.S. Steel
- United States
- United States Dollar
- Vivisimo
- Vocelli Pizza
- Wabtec
- WESCO International
- Wikipedia Stub
- Wind turbine design
- WP EL
- WP NOT
-
ANSYS Workbench Tutorial - Simply Supported Beam - PART 1
ANSYS 15 Workbench Static Structural - Simply Supported Square Section Beam with uniformly distributed load - Tutorial Workshop for beginners. This tutorials shows how to use geometry modeler, mesh convergence, stress and deformation along a path, section cuts or section views, undeformed shape, report generation, etc. Comparing results with hand calculations for the maximum beam deflection, maximum beam bending stress in tension and compression, neutral axis results, shear stress results. LINK TO XLS SHEET: http://sh.st/nP5QR Please dontate via paypal for support!: drdalyo@gmail.com -
ANSYS - Lesson 01: Basics and a Simple Example
This lesson covers the basics of FEA with ANSYS and a very simple example which demonstrates the steps required to run an analysis in ANSYS. ------ Few Notes: - Somehow, the software I was using to capture was doing smart focusing that I was unaware of. This helps better quality in smaller video size, but may be bothering in some cases. I will try to turn this feature off for future videos. - While watching the video, I realized couple of my mistakes, such as typos or saying 1 meters. Oops, I will be more careful in next videos. - This video is pretty lengthy for it covers two topics: introduction to ANSYS and an example. Your patience is highly appreciated! - Please leave comments, ideas and question. They will help me to produce more helpful videos. -
ANSYS 17.0 Tutorial - Non Linear Plastic Deformation I-Beam
ANSYS Workbench 17.0 Tutorial for a Non Linear Plastic Deformation Cantilever I-Beam with uniform varying load. In this tutorial I will go over the different plasticity models such as bilinear and multilinear isotropic hardening and how to get plastic deformation results in ANSYS 17.0. We will go over built in cross-sections, modeling of an I-Beam (or American Wide Flange Beam, W Beam), use of substeps and multistep problem creation, creating a stress-strain chart plot of the results with unloading, cross-section views and finally report generation. -
Introduction to ANSYS Workbench (abbreviated session)
Introductory webinar for ANSYS Workbench Mechanical, v15.0.7. This is Part 1 of a two-part series hosted by SimuTech engineers. It is an abbreviated session from what is normally conducted in a formal classroom training situation. These quick-start sessions are scheduled throughout the year and are free. Contact me if you'd like to sign up for one. CFD quick-start sessions are also available (free also). -
-
fluent ansys analysis
Air flow in car analysis using FLUENT ( CFD ) -
ANSYS Workbench Tutorial Video | Bolt Pretension | Contact Non Linear FE Analysis | GRS |
ANSYS Workbench Tutorial Video on Bolt Pretension Fastener or Bolt & nut Contact Non Linear FE Analysis | Metric units| Time stepping | Contact Status & Formulation | Gauss Point detection method | Mesh Refinement | Steel Material Assignment | Isotropic Hardening | Density Yield Tangent and Young Modulus | Creo to ANSYS IGES import & edit | Apply Force & Constraints | Plotting Result for Stress Strain Deflection Contact Pressure & Animation | For more Tutorial Videos Click on the link below ANSYS Workbench https://www.youtube.com/playlist?list=PLOahOE6DpL4qq_QxPHieAeVejzDP1yIYW ANSYS Multiphysics https://www.youtube.com/playlist?list=PLOahOE6DpL4qojPO7_GkgkVC-cB8KFMeC Hypermesh https://www.youtube.com/playlist?list=PLOahOE6DpL4puVylWdpHWRoGhIfswDc6T Creo Simulate | Pro Mechanica | https... -
ANSYS Reinforced Concrete Beam (RC BEAM) - Static Structural
ANSYS Workbench Tutorial using Static Structural to model a RC Beam (Reinforced Concrete Beam). Failed elements or cracked and crushed elements are shown using the PLCRACK command. Deformation of the Rebar can also be outputted. This is a four point bending test of concrete. Command Files DOWNLOAD: http://sh.st/nP5iZ -
Fatigue Analysis in ANSYS | Fatigue Failure | HCF High Cycle & LCF Low Cycle Fatigue Life | GRS |
ANSYS Workbench Tutorial Video on Fatigue analysis | For queries send message on skype ID: engineeringtutorsdesk or mail engineeringtutorsdesk@gmail.com | This video will take you through how to evaluate the fatigue failure and the fatigue analysis methods, high cycle fatigue, low cycle fatigue, stress life fatigue analysis, strain life fatigue analysis, fracture mechanics, SN curve for structural steel, Alternating stress vs Number of cycles, What is fatigue life, fatigue damage, Fatigue Safety Factor, Bi Axiality, Sensitivity Curve, What are the Mean Stress correction Theory, Goodman equation in Fatigue analysis, Von Mises Stress approach for fatigue analysis, Fatigue Strength Correction Factor -
Modeling Contact in ANSYS Workbench
Introductory webinar for using Contact features in ANSYS Workbench Mechanical, v15.0.7.
ANSYS Workbench Tutorial - Simply Supported Beam - PART 1
- Order: Reorder
- Duration: 19:24
- Updated: 13 Sep 2015
- views: 25246
ANSYS 15 Workbench Static Structural - Simply Supported Square Section Beam with uniformly distributed load - Tutorial Workshop for beginners.
This tutorials s...
ANSYS 15 Workbench Static Structural - Simply Supported Square Section Beam with uniformly distributed load - Tutorial Workshop for beginners.
This tutorials shows how to use geometry modeler, mesh convergence, stress and deformation along a path, section cuts or section views, undeformed shape, report generation, etc.
Comparing results with hand calculations for the maximum beam deflection, maximum beam bending stress in tension and compression, neutral axis results, shear stress results.
LINK TO XLS SHEET: http://sh.st/nP5QR
Please dontate via paypal for support!: drdalyo@gmail.com
wn.com/Ansys Workbench Tutorial Simply Supported Beam Part 1
ANSYS 15 Workbench Static Structural - Simply Supported Square Section Beam with uniformly distributed load - Tutorial Workshop for beginners.
This tutorials shows how to use geometry modeler, mesh convergence, stress and deformation along a path, section cuts or section views, undeformed shape, report generation, etc.
Comparing results with hand calculations for the maximum beam deflection, maximum beam bending stress in tension and compression, neutral axis results, shear stress results.
LINK TO XLS SHEET: http://sh.st/nP5QR
Please dontate via paypal for support!: drdalyo@gmail.com
- published: 13 Sep 2015
- views: 25246
ANSYS - Lesson 01: Basics and a Simple Example
- Order: Reorder
- Duration: 39:21
- Updated: 06 Jan 2013
- views: 202635
This lesson covers the basics of FEA with ANSYS and a very simple example which demonstrates the steps required to run an analysis in ANSYS.
------
Few Notes:
-...
This lesson covers the basics of FEA with ANSYS and a very simple example which demonstrates the steps required to run an analysis in ANSYS.
------
Few Notes:
- Somehow, the software I was using to capture was doing smart focusing that I was unaware of. This helps better quality in smaller video size, but may be bothering in some cases. I will try to turn this feature off for future videos.
- While watching the video, I realized couple of my mistakes, such as typos or saying 1 meters. Oops, I will be more careful in next videos.
- This video is pretty lengthy for it covers two topics: introduction to ANSYS and an example. Your patience is highly appreciated!
- Please leave comments, ideas and question. They will help me to produce more helpful videos.
wn.com/Ansys Lesson 01 Basics And A Simple Example
This lesson covers the basics of FEA with ANSYS and a very simple example which demonstrates the steps required to run an analysis in ANSYS.
------
Few Notes:
- Somehow, the software I was using to capture was doing smart focusing that I was unaware of. This helps better quality in smaller video size, but may be bothering in some cases. I will try to turn this feature off for future videos.
- While watching the video, I realized couple of my mistakes, such as typos or saying 1 meters. Oops, I will be more careful in next videos.
- This video is pretty lengthy for it covers two topics: introduction to ANSYS and an example. Your patience is highly appreciated!
- Please leave comments, ideas and question. They will help me to produce more helpful videos.
- published: 06 Jan 2013
- views: 202635
ANSYS 17.0 Tutorial - Non Linear Plastic Deformation I-Beam
- Order: Reorder
- Duration: 18:44
- Updated: 14 Feb 2016
- views: 3558
ANSYS Workbench 17.0 Tutorial for a Non Linear Plastic Deformation Cantilever I-Beam with uniform varying load. In this tutorial I will go over the different pl...
ANSYS Workbench 17.0 Tutorial for a Non Linear Plastic Deformation Cantilever I-Beam with uniform varying load. In this tutorial I will go over the different plasticity models such as bilinear and multilinear isotropic hardening and how to get plastic deformation results in ANSYS 17.0. We will go over built in cross-sections, modeling of an I-Beam (or American Wide Flange Beam, W Beam), use of substeps and multistep problem creation, creating a stress-strain chart plot of the results with unloading, cross-section views and finally report generation.
wn.com/Ansys 17.0 Tutorial Non Linear Plastic Deformation I Beam
ANSYS Workbench 17.0 Tutorial for a Non Linear Plastic Deformation Cantilever I-Beam with uniform varying load. In this tutorial I will go over the different plasticity models such as bilinear and multilinear isotropic hardening and how to get plastic deformation results in ANSYS 17.0. We will go over built in cross-sections, modeling of an I-Beam (or American Wide Flange Beam, W Beam), use of substeps and multistep problem creation, creating a stress-strain chart plot of the results with unloading, cross-section views and finally report generation.
- published: 14 Feb 2016
- views: 3558
Introduction to ANSYS Workbench (abbreviated session)
- Order: Reorder
- Duration: 208:30
- Updated: 07 Aug 2015
- views: 5752
Introductory webinar for ANSYS Workbench Mechanical, v15.0.7. This is Part 1 of a two-part series hosted by SimuTech engineers. It is an abbreviated session f...
Introductory webinar for ANSYS Workbench Mechanical, v15.0.7. This is Part 1 of a two-part series hosted by SimuTech engineers. It is an abbreviated session from what is normally conducted in a formal classroom training situation.
These quick-start sessions are scheduled throughout the year and are free. Contact me if you'd like to sign up for one. CFD quick-start sessions are also available (free also).
wn.com/Introduction To Ansys Workbench (Abbreviated Session)
Introductory webinar for ANSYS Workbench Mechanical, v15.0.7. This is Part 1 of a two-part series hosted by SimuTech engineers. It is an abbreviated session from what is normally conducted in a formal classroom training situation.
These quick-start sessions are scheduled throughout the year and are free. Contact me if you'd like to sign up for one. CFD quick-start sessions are also available (free also).
- published: 07 Aug 2015
- views: 5752
Ansys workbench and using LSDYNA Soda can crush Explicit Dynamics analysis
- Order: Reorder
- Duration: 6:50
- Updated: 05 Sep 2014
- views: 41551
Ansys workbench and using LSDYNA Soda can crush Explicit Dynamics analysis and
step by step procedure
Ansys workbench and using LSDYNA Soda can crush Explicit Dynamics analysis and
step by step procedure
wn.com/Ansys Workbench And Using Lsdyna Soda Can Crush Explicit Dynamics Analysis
fluent ansys analysis
- Order: Reorder
- Duration: 11:36
- Updated: 02 Jan 2015
- views: 40982
Air flow in car analysis using FLUENT ( CFD )
Air flow in car analysis using FLUENT ( CFD )
wn.com/Fluent Ansys Analysis
ANSYS Workbench Tutorial Video | Bolt Pretension | Contact Non Linear FE Analysis | GRS |
- Order: Reorder
- Duration: 22:49
- Updated: 22 Dec 2014
- views: 35479
ANSYS Workbench Tutorial Video on Bolt Pretension Fastener or Bolt & nut Contact Non Linear FE Analysis | Metric units| Time stepping | Contact Status & Formula...
ANSYS Workbench Tutorial Video on Bolt Pretension Fastener or Bolt & nut Contact Non Linear FE Analysis | Metric units| Time stepping | Contact Status & Formulation | Gauss Point detection method | Mesh Refinement | Steel Material Assignment | Isotropic Hardening | Density Yield Tangent and Young Modulus | Creo to ANSYS IGES import & edit | Apply Force & Constraints | Plotting Result for Stress Strain Deflection Contact Pressure & Animation |
For more Tutorial Videos Click on the link below
ANSYS Workbench
https://www.youtube.com/playlist?list=PLOahOE6DpL4qq_QxPHieAeVejzDP1yIYW
ANSYS Multiphysics
https://www.youtube.com/playlist?list=PLOahOE6DpL4qojPO7_GkgkVC-cB8KFMeC
Hypermesh
https://www.youtube.com/playlist?list=PLOahOE6DpL4puVylWdpHWRoGhIfswDc6T
Creo Simulate | Pro Mechanica |
https://www.youtube.com/playlist?list=PLOahOE6DpL4qvb2Z0Ir8SwvUyv0qnRGH4
Creo Parametric Tutorial
https://www.youtube.com/playlist?list=PLC1voSxuLSym29Dt_xNnIJxBCtE-k9iul
Pro E Wildfire Tutorial
https://www.youtube.com/playlist?list=PLLBsoJO8DYcVGLa_se2y5Ao0Vzwy6TUbz
For online training on ANSYS Workbench | Creo Parametric & Simulate | Pro E Wildfire & Mechanica | HyperMesh |
Contact: engineeringtutorsdesk@gmail.com
wn.com/Ansys Workbench Tutorial Video | Bolt Pretension | Contact Non Linear Fe Analysis | Grs |
ANSYS Workbench Tutorial Video on Bolt Pretension Fastener or Bolt & nut Contact Non Linear FE Analysis | Metric units| Time stepping | Contact Status & Formulation | Gauss Point detection method | Mesh Refinement | Steel Material Assignment | Isotropic Hardening | Density Yield Tangent and Young Modulus | Creo to ANSYS IGES import & edit | Apply Force & Constraints | Plotting Result for Stress Strain Deflection Contact Pressure & Animation |
For more Tutorial Videos Click on the link below
ANSYS Workbench
https://www.youtube.com/playlist?list=PLOahOE6DpL4qq_QxPHieAeVejzDP1yIYW
ANSYS Multiphysics
https://www.youtube.com/playlist?list=PLOahOE6DpL4qojPO7_GkgkVC-cB8KFMeC
Hypermesh
https://www.youtube.com/playlist?list=PLOahOE6DpL4puVylWdpHWRoGhIfswDc6T
Creo Simulate | Pro Mechanica |
https://www.youtube.com/playlist?list=PLOahOE6DpL4qvb2Z0Ir8SwvUyv0qnRGH4
Creo Parametric Tutorial
https://www.youtube.com/playlist?list=PLC1voSxuLSym29Dt_xNnIJxBCtE-k9iul
Pro E Wildfire Tutorial
https://www.youtube.com/playlist?list=PLLBsoJO8DYcVGLa_se2y5Ao0Vzwy6TUbz
For online training on ANSYS Workbench | Creo Parametric & Simulate | Pro E Wildfire & Mechanica | HyperMesh |
Contact: engineeringtutorsdesk@gmail.com
- published: 22 Dec 2014
- views: 35479
ANSYS Reinforced Concrete Beam (RC BEAM) - Static Structural
- Order: Reorder
- Duration: 16:37
- Updated: 03 Jan 2016
- views: 1357
ANSYS Workbench Tutorial using Static Structural to model a RC Beam (Reinforced Concrete Beam). Failed elements or cracked and crushed elements are shown using ...
ANSYS Workbench Tutorial using Static Structural to model a RC Beam (Reinforced Concrete Beam). Failed elements or cracked and crushed elements are shown using the PLCRACK command. Deformation of the Rebar can also be outputted. This is a four point bending test of concrete.
Command Files DOWNLOAD: http://sh.st/nP5iZ
wn.com/Ansys Reinforced Concrete Beam (Rc Beam) Static Structural
ANSYS Workbench Tutorial using Static Structural to model a RC Beam (Reinforced Concrete Beam). Failed elements or cracked and crushed elements are shown using the PLCRACK command. Deformation of the Rebar can also be outputted. This is a four point bending test of concrete.
Command Files DOWNLOAD: http://sh.st/nP5iZ
- published: 03 Jan 2016
- views: 1357
Fatigue Analysis in ANSYS | Fatigue Failure | HCF High Cycle & LCF Low Cycle Fatigue Life | GRS |
- Order: Reorder
- Duration: 29:01
- Updated: 03 Nov 2015
- views: 8118
ANSYS Workbench Tutorial Video on Fatigue analysis | For queries send message on skype ID: engineeringtutorsdesk or mail engineeringtutorsdesk@gmail.com | This...
ANSYS Workbench Tutorial Video on Fatigue analysis | For queries send message on skype ID: engineeringtutorsdesk or mail engineeringtutorsdesk@gmail.com | This video will take you through how to evaluate the fatigue failure and the fatigue analysis methods, high cycle fatigue, low cycle fatigue, stress life fatigue analysis, strain life fatigue analysis, fracture mechanics, SN curve for structural steel, Alternating stress vs Number of cycles, What is fatigue life, fatigue damage, Fatigue Safety Factor, Bi Axiality, Sensitivity Curve, What are the Mean Stress correction Theory, Goodman equation in Fatigue analysis, Von Mises Stress approach for fatigue analysis, Fatigue Strength Correction Factor
wn.com/Fatigue Analysis In Ansys | Fatigue Failure | Hcf High Cycle Lcf Low Cycle Fatigue Life | Grs |
ANSYS Workbench Tutorial Video on Fatigue analysis | For queries send message on skype ID: engineeringtutorsdesk or mail engineeringtutorsdesk@gmail.com | This video will take you through how to evaluate the fatigue failure and the fatigue analysis methods, high cycle fatigue, low cycle fatigue, stress life fatigue analysis, strain life fatigue analysis, fracture mechanics, SN curve for structural steel, Alternating stress vs Number of cycles, What is fatigue life, fatigue damage, Fatigue Safety Factor, Bi Axiality, Sensitivity Curve, What are the Mean Stress correction Theory, Goodman equation in Fatigue analysis, Von Mises Stress approach for fatigue analysis, Fatigue Strength Correction Factor
- published: 03 Nov 2015
- views: 8118
Modeling Contact in ANSYS Workbench
- Order: Reorder
- Duration: 47:03
- Updated: 16 Dec 2014
- views: 18931
Introductory webinar for using Contact features in ANSYS Workbench Mechanical, v15.0.7.
- published: 16 Dec 2014
- views: 18931
close fullscreen
- Playlist
- Chat
close fullscreen
- Playlist
- Chat
19:24
ANSYS Workbench Tutorial - Simply Supported Beam - PART 1
ANSYS 15 Workbench Static Structural - Simply Supported Square Section Beam with uniformly...
published: 13 Sep 2015
ANSYS Workbench Tutorial - Simply Supported Beam - PART 1
ANSYS Workbench Tutorial - Simply Supported Beam - PART 1
- Report rights infringement
- published: 13 Sep 2015
- views: 25246
39:21
ANSYS - Lesson 01: Basics and a Simple Example
This lesson covers the basics of FEA with ANSYS and a very simple example which demonstrat...
published: 06 Jan 2013
ANSYS - Lesson 01: Basics and a Simple Example
ANSYS - Lesson 01: Basics and a Simple Example
- Report rights infringement
- published: 06 Jan 2013
- views: 202635
18:44
ANSYS 17.0 Tutorial - Non Linear Plastic Deformation I-Beam
ANSYS Workbench 17.0 Tutorial for a Non Linear Plastic Deformation Cantilever I-Beam with ...
published: 14 Feb 2016
ANSYS 17.0 Tutorial - Non Linear Plastic Deformation I-Beam
ANSYS 17.0 Tutorial - Non Linear Plastic Deformation I-Beam
- Report rights infringement
- published: 14 Feb 2016
- views: 3558
208:30
Introduction to ANSYS Workbench (abbreviated session)
Introductory webinar for ANSYS Workbench Mechanical, v15.0.7. This is Part 1 of a two-par...
published: 07 Aug 2015
Introduction to ANSYS Workbench (abbreviated session)
Introduction to ANSYS Workbench (abbreviated session)
- Report rights infringement
- published: 07 Aug 2015
- views: 5752
6:50
Ansys workbench and using LSDYNA Soda can crush Explicit Dynamics analysis
Ansys workbench and using LSDYNA Soda can crush Explicit Dynamics analysis and
step by s...
published: 05 Sep 2014
Ansys workbench and using LSDYNA Soda can crush Explicit Dynamics analysis
Ansys workbench and using LSDYNA Soda can crush Explicit Dynamics analysis
- Report rights infringement
- published: 05 Sep 2014
- views: 41551
11:36
fluent ansys analysis
Air flow in car analysis using FLUENT ( CFD )
published: 02 Jan 2015
fluent ansys analysis
fluent ansys analysis
- Report rights infringement
- published: 02 Jan 2015
- views: 40982
22:49
ANSYS Workbench Tutorial Video | Bolt Pretension | Contact Non Linear FE Analysis | GRS |
ANSYS Workbench Tutorial Video on Bolt Pretension Fastener or Bolt & nut Contact Non Linea...
published: 22 Dec 2014
ANSYS Workbench Tutorial Video | Bolt Pretension | Contact Non Linear FE Analysis | GRS |
ANSYS Workbench Tutorial Video | Bolt Pretension | Contact Non Linear FE Analysis | GRS |
- Report rights infringement
- published: 22 Dec 2014
- views: 35479
16:37
ANSYS Reinforced Concrete Beam (RC BEAM) - Static Structural
ANSYS Workbench Tutorial using Static Structural to model a RC Beam (Reinforced Concrete B...
published: 03 Jan 2016
ANSYS Reinforced Concrete Beam (RC BEAM) - Static Structural
ANSYS Reinforced Concrete Beam (RC BEAM) - Static Structural
- Report rights infringement
- published: 03 Jan 2016
- views: 1357
29:01
Fatigue Analysis in ANSYS | Fatigue Failure | HCF High Cycle & LCF Low Cycle Fatigue Life | GRS |
ANSYS Workbench Tutorial Video on Fatigue analysis | For queries send message on skype ID:...
published: 03 Nov 2015
Fatigue Analysis in ANSYS | Fatigue Failure | HCF High Cycle & LCF Low Cycle Fatigue Life | GRS |
Fatigue Analysis in ANSYS | Fatigue Failure | HCF High Cycle & LCF Low Cycle Fatigue Life | GRS |
- Report rights infringement
- published: 03 Nov 2015
- views: 8118
47:03
Modeling Contact in ANSYS Workbench
Introductory webinar for using Contact features in ANSYS Workbench Mechanical, v15.0.7.
published: 16 Dec 2014
Modeling Contact in ANSYS Workbench
Modeling Contact in ANSYS Workbench
- Report rights infringement
- published: 16 Dec 2014
- views: 18931
ANSYS Workbench Tutorial - Simply Supported Beam -...
ANSYS - Lesson 01: Basics and a Simple Example...
ANSYS 17.0 Tutorial - Non Linear Plastic Deformati...
Introduction to ANSYS Workbench (abbreviated sessi...
Ansys workbench and using LSDYNA Soda can crush ...
fluent ansys analysis...
ANSYS Workbench Tutorial Video | Bolt Pretension |...
ANSYS Reinforced Concrete Beam (RC BEAM) - Static ...
Fatigue Analysis in ANSYS | Fatigue Failure | HCF...
Modeling Contact in ANSYS Workbench...
-
Lyrics list:lyrics
-
Lucid Dream
-
The Shore
-
Suffocate
-
The Last Man
-
Mr Twilight
-
Justify
Lucid Dream
lucid dream
walking in a dark road
followed by an angel
falling from a ba dream
where everything seems real
standing at the crossroads
i’m running out of breath
lost within this underworld
i cannot wake up
i break the mirror
still can see my face
no way to get out of that place
searching a lost key that can take me off this wasteland
the clock is ticking in my head
i beg this shape, give me a break
but i can’t find the path
that’s leading out of my mind
i’ve nowhere to go
but i can fight somehow
free me from my sins
i’m trapped into my dream
with nowhere to go
but i can fight somehow
teach me how
tell me how
i’ll break those walls that stick my mind
hold me now
leave me now
photo: AP / Rich Pedroncelli
Trump Blasts GOP Delegate Revolt Talk
Edit Newsweek 19 Jun 2016
As their presumptive nominee continues an unrelenting string of bluster and gaffe, Republicans against Donald Trump continue to search for a way to block him from becoming the party’s standard-bearer. Last month, the #neverTrump campaign focused on finding an independent presidential candidate who would either thwart any chance at a Trump presidency or maybe even win in November ... Try Newsweek. Subscription offers ... ....
photo: Creative Commons / Nathania Johnson
Why Hillary Clinton eats a hot pepper every single day
Edit NZ Herald 19 Jun 2016
Say what you will about the trustworthiness of Hillary Clinton. The candidate who could make history as the first female U.S. president has been nothing but transparent about the fact that she's a hothead."Sriracha, Tabasco, tomatillo... ....
photo: US National Park Service / K Fink
Woman rescues 5-year-old son from mountain lion's jaws
Edit Business Insider 19 Jun 2016
DENVER (AP) - Summoned by the sound of screams, a Colorado woman raced to her front yard to find a terrifying sight. A mountain lion was hunched over her 5-year-old son, biting him. The woman charged the animal, yanked away one of its paws and discovered her son's whole head was in its mouth. She didn't back down. "She was able to pry the cat's jaws open," Pitkin County Sheriff's Deputy Michael Buglione said. "She's a hero." ... ....
photo: AP / Richard Shotwell
'Star Trek' actor Anton Yelchin dies in car crash at age 27
Edit Austin American Statesman 19 Jun 2016
Anton Yelchin, a charismatic and rising actor best known for playing Chekov in the new "Star Trek" films, has died at the age of 27. He was killed in a fatal traffic collision early Sunday morning, his publicist, Jennifer Allen confirmed ... ....
photo: WN / Ahmed Deeb
Israel: Water as a tool to dominate Palestinians
Edit Al Jazeera 19 Jun 2016
As temperatures rise and summer months approach, yet again this year, thousands of Palestinians in the occupied West Bank are being deprived of their most basic need - access to water - as the Israeli national water company Mekorot restricted the water supply to villages and towns in northern West Bank ... As a result, thousands of Palestinians are unable to access sufficient water supplies and became water-dependent on Israel ... READ MORE....
« back to news headlines
The Latest: Soccer ball splits open at Euro 2016
Edit Boston Herald 20 Jun 2016
PARIS — The Latest from soccer's European Championship (all times local).. ___. 10.25 p.m. A ball split open during France's match against Switzerland in Lille. France forward Antoine Griezmann was dribbling when Switzerland midfielder Valon Behrami stepped in to tackle ... ___. 9.49 p.m ... Etrit Berisha, Elseid Hysaj, Arlind Ajeti, Mergim Mavraj, Ansi Agolli, Amir Abrashi, Migjen Basha, Ledian Memushaj, Andi Lila, Ermir Lenjani, Armando Sadiku....
Football: Euro 2016 results - collated
Edit The Times of India 19 Jun 2016
Paris, June 19, 2016 (AFP) -. Euro 2016 results on Sunday.. Group A. Switzerland 0 France 0. Switzerland (4-2-3-1) ... Coach. Vladimir Petkovic (SUI). Referee. Damir Skomina (SLO). France (4-3-3) ... Yellow card. Laurent Koscielny, Adil Rami. Coach. Didier Deschamps (FRA) ... Yellow card ... Coach ... Etrit Berisha; Elseid Hysaj, Arlind Ajeti, Mergim Mavraj, Ansi Agolli (capt); Andi Lila, Amir Abrashi, Migjen Basha, Ledian Memushaj, Ermir Lenjani; Armando Sadiku....
The Latest: Lineups for match between Romania and Albania
Edit The Associated Press 19 Jun 2016
PARIS (AP) -- The Latest from soccer's European Championship (all times local).. ---. 8.22 p.m. Here are the lineups for the Group A match between Romania and Albania at Stade de Lyon.. Romania ... Albania. Etrit Berisha, Elseid Hysaj, Arlind Ajeti, Mergim Mavraj, Ansi Agolli, Amir Abrashi, Migjen Basha, Ledian Memushaj, Andi Lila, Ermir Lenjani, Armando Sadiku. ---. 8.20 p.m ... Switzerland ... France ... ---. 4.50 p.m ... ---. 12.55 p.m ... ---. 12.50 p.m ... ---....
The Latest: Romania makes 5 changes to face Albania
Edit Boston Herald 19 Jun 2016
PARIS — The Latest from soccer's European Championship (all times local).. ___. 8.35 p.m. Romania coach Anghel Iordanescu has made five changes to his starting lineup for the match against Albania, a game both sides must win to have a chance to advance ... ___. 8.30 p.m ... ___. 8.22 p.m ... Etrit Berisha, Elseid Hysaj, Arlind Ajeti, Mergim Mavraj, Ansi Agolli, Amir Abrashi, Migjen Basha, Ledian Memushaj, Andi Lila, Ermir Lenjani, Armando Sadiku. ___....
The Latest: Flares lit during Romania's national anthem
Edit The Associated Press 19 Jun 2016
PARIS (AP) -- The Latest from soccer's European Championship (all times local).. ---. 9.08 p.m. Two flares were lit in the section of Romania fans during and shortly after the national anthem before kickoff against Albania ... ---. 9.05 p.m ... ---. 8.35 p.m ... ---. 8.30 p.m ... ---. 8.22 p.m ... Etrit Berisha, Elseid Hysaj, Arlind Ajeti, Mergim Mavraj, Ansi Agolli, Amir Abrashi, Migjen Basha, Ledian Memushaj, Andi Lila, Ermir Lenjani, Armando Sadiku ... ....
The Latest: Sadiku scores to give Albania 1-0 lead
Edit The Associated Press 19 Jun 2016
PARIS (AP) -- The Latest from soccer's European Championship (all times local).. ---. 9.43 p.m. GOAL. Armando Sadiku has scored for Albania in the 43rd minute. Albania leads Romania 1-0. ---. 9.08 p.m ... Some smoke drifted up at the Stade de Lyon before slowly dispersing. ---. 9.05 p.m ... Etrit Berisha, Elseid Hysaj, Arlind Ajeti, Mergim Mavraj, Ansi Agolli, Amir Abrashi, Migjen Basha, Ledian Memushaj, Andi Lila, Ermir Lenjani, Armando Sadiku....
The Latest: Albania leads Romania 1-0 at halftime
Edit The Associated Press 19 Jun 2016
PARIS (AP) -- The Latest from soccer's European Championship (all times local).. ---. 9.49 p.m. Armando Sadiku gave Albania a 1-0 halftime lead over Romania, scoring his team's first goal at the European Championship. The striker headed in a cross in 43rd minute ... --- ... --- ... Etrit Berisha, Elseid Hysaj, Arlind Ajeti, Mergim Mavraj, Ansi Agolli, Amir Abrashi, Migjen Basha, Ledian Memushaj, Andi Lila, Ermir Lenjani, Armando Sadiku ... ....
The Latest: Albania beats Romania 1-0 for 1st Euro 2016 win
Edit The Miami Herald 19 Jun 2016
The Latest from soccer's European Championship (all times local).. ---. 10.55 p.m. Albania scored its first goal and won its first match at the European Championship, beating Romania 1-0 in Lyon ... The three points lifted Albania past Romania and into third place in Group A ... --- ... --- ... Etrit Berisha, Elseid Hysaj, Arlind Ajeti, Mergim Mavraj, Ansi Agolli, Amir Abrashi, Migjen Basha, Ledian Memushaj, Andi Lila, Ermir Lenjani, Armando Sadiku ... ....
The Latest: Albanian capital erupts after Euros win
Edit The Associated Press 19 Jun 2016
PARIS (AP) -- The Latest from soccer's European Championship (all times local).. ---. 12.10 a.m ... Thousands of Albanians gathered in fan zones, lighting firecrackers, sounding car horns, shouting loudly and waving the red and black national flag ... ---. 10.55 p.m ... ---. 10.50 p.m ... --- ... Etrit Berisha, Elseid Hysaj, Arlind Ajeti, Mergim Mavraj, Ansi Agolli, Amir Abrashi, Migjen Basha, Ledian Memushaj, Andi Lila, Ermir Lenjani, Armando Sadiku ... ....
Jarawa numbers up 62% in 15 yrs
Edit The Times of India 18 Jun 2016
Kolkata ... "Their number is at 429," said AnSI director-in-charge M Sasikumar. This data will figure in the book 'Particularly Vulnerable Tribal Groups of India' to be released by AnSI to mark International Day of the World's Indigenous People on August 9. It includes a paper by AnSI deputy director Anstice Justin where he attributes the rise in population to modern healthcare ... RELATED. From around the web....
BenQ HT4050 projector review: Solid performance, price could have been better
Edit The Times of India 18 Jun 2016
BenQ's HT4050 is a single-chip DLP projector, and it's also one of the priciest among its class. The projector is 3D capable, but also delivers excellent 2D projection. It's also easily adjustable, thanks to the built-in lens shift functionality ... Design and build quality ... Also read ... Performance. With 2000 ANSI lumens of brightness, BenQ HT4050 produces bright images and vivid colours that look great even on non-white and textured surfaces....
IICRC Seeks Nominations for Board of Directors (ISSA - The Worldwide Cleaning Industry Association)
Edit Public Technologies 17 Jun 2016
(Source. ISSA - The Worldwide Cleaning Industry Association) ... Nominations are due no later than July 10, 2016 ... IICRC Headquarters, Attn ... About IICRC. IICRC is an ANSI-accredited standards-setting body for the flooring inspection, floor covering, and specialized fabric cleaning and disaster restoration industries ... (noodl....
Touché! Choi, CMU Leaders Make Trek To National Maker Faire (Carnegie Mellon University)
Edit Public Technologies 17 Jun 2016
(Source. Carnegie Mellon University). Friday, June 17, 2016. A lightsaber-wielding robot challenges John Choi to a duel ... The provost highlighted CMU's new commitments to making, including the development of the College of Engineering's new MakerWing and the future ANSYS Building, a 30,000 square-foot facility that will feature a simulation and collaboration lab and a large open bay facility for students to build full-scale projects....
- 1
- 2
- 3
- 4
- 5
- Next page »
