A cold process soap making tutorial with a complete explanation and demonstration of how to masterbatch lye and oils for cold process soap making. You do not need to be making huge amounts of soap to benefit from master batching (masterbatching) your lye and oils. Even if you make one loaf of soap a week, you can easily make a month or two's lye and oils in advance giving you several advantages: Saves time each time you make soap Ingredients ready to go anytime you need them Easy to quickly make a very small batch to test a new fragrance or colorant Better accuracy as slight under or over measurements have a much smaller impact on a larger volume. Please make sure whenever you are mixing lye that you have a proper lye safe bottle, it should have a number 2 or 5 on the bottom, also do not fill it right to the top, the lye gets hot and the bottle needs to expand a bit, if you have filled right to the top you can get a lot of pressure on the cap, so just leave a gap and you will be fine. I have never had any issues with mine Timestamps: 00:00 Introduction 00:43 Equipment needed 01:27 Scaling up your soap recipe 02:44 Masterbatching oils 10:04 Masterbatching lye solution 14:42 Calculating lye solution to use in your soap batch 15:41 Super clear lye solution, no lye lint 15:59 Using your masterbatch oils I try to give lots of hints and tips in all of my videos, so hopefully, you can use some of the techniques in this cold process soap making tutorial in your own soap making. I hope you enjoy the video. I'd love it if you would give me a thumbs up, subscribe to my channel, and ring the notification bell. This helps me to grow my channel. If you have any comments or question please leave them in the comment section below and I will get back to you. Links: My Instagram page - https://www.instagram.com/idreaminsoap Acrylic soap mold - https://customcrafttools.com/collections/soap-molds Soap Challenge club - https://soapchallengeclub.com/ Note: Although my cold process soap making tutorials are of a tutorial nature, they are intended for people who have a good understanding of making cold process soap. The information given is based on what works for me, however, there are lots of variables associated with cold process soap making and I, therefore, take no responsibility for the results achieved when using the techniques or methods explained in these tutorials. Cold process soap involves the necessary use of sodium Hydroxide (lye) which is a very dangerous substance. Before attempting and cold process soap making you should ensure you are fully aware of the lye safety procedures and always wear the correct safety equipment when making soap.

• published: 10 Jun 2020
• views: 19625