7:21
The Engine Test Stand Part 1
The Engine Test Stand Part 1
Part one of the SBC engine test stand, I go over the engine test stand I built a while ago, outlining the unit with dimensions so that you will be able to build one.
3:00
cheap engine test stand
cheap engine test stand
I'm starting an engine on a swap meet engine cradle before I put it in the car.These things can be bought at auto swap meets for $25 to $30 bucks.Chevy,Ford,Mopar
9:58
The Easy-Run Engine Test Stand at Egge Machine Company
The Easy-Run Engine Test Stand at Egge Machine Company
Master Mechanic and TV Host Sam Memmolo shows the features and benefits of this versatile engine test stand. Made in America the Easy-Run Engine Test Stand can be adjusted to fit motors from 4 cylinder foreign jobs to big-block hemis. Get yours at Egge Machine Company. Visit www.EGGE.com for more details and search part number ER20001
2:39
427 Engine Test Stand
427 Engine Test Stand
1967 Corvette 427 on an engine test stand that we built from scrap metal. Video of idle with a couple of revs.
1:32
A Real Racing Engine Test Stand
A Real Racing Engine Test Stand
PRW Racing Engine Test Stand The PRW Racing Engine Test Stand is the first US patent pending collapsible design that is manufactured with standard parts, readily available from the manufacturer. For the small shop or race trailer, the ETS is a real space-saver when collapsed. It is available as a base unit for the do-ityourselfer, or accessorized with a radiator, electric fan, fuel cell, pre-drilled instrument panel, on-off switches, momentary starter switch, oil pressure gauge, water temperature gauge, and 0-8000 RPM tachometer. The Low-Profile ETS is designed to accommodate most engines, and built to meet the demands of high-output racing engines and heavier big blocks, taking mobile engine test stands to a whole new level of functionality.
10:33
Easy Run Engine Test Stands | Sam Memmolo | Two Guys Garage
Easy Run Engine Test Stands | Sam Memmolo | Two Guys Garage
Sam Memmolo from 'Two Guys Garage' sets up and plays with the Easy Run Engine Test Stand.
2:27
V8TV Update: '65 Chevelle Engine Test Stand
V8TV Update: '65 Chevelle Engine Test Stand
www.v8tvshow.com - We're going to break in the new cam on the 1965 Chevelle using the chassis as an engine test stand!
4:22
ROVER NERVA Nuclear Rocket Engine test stand #2
ROVER NERVA Nuclear Rocket Engine test stand #2
www.nuclearspace.com Project ROVER NERVA Nuclear Rocket Engine testing @ Jackass Flats, Nevada. ID type engine KIWI, Phoebus, NRX, XE PRIME http LANL film archive
5:56
The Engine Test Stand Part 2
The Engine Test Stand Part 2
Part two of the SBC engine test stand, I go over the engine test stand I built a while ago, outlining the unit with dimensions so that you will be able to build one.
4:41
VW 1835 Engine Test Stand Running
VW 1835 Engine Test Stand Running
Finished the Engine Test Stand and went through the break in procedure for my new 1835 Engine. Everything went smoothly and the engine is running great. Got the Transmission out and am ready to set up the Hydraulic Clutch line. Making good progress.
2:22
Radial Engine Test Stand Run Backfires
Radial Engine Test Stand Run Backfires
Here's all the video I got of our fun project. The test stand is a mix of parts put together over the years to mount different engines on. This engine is a 9 cylinder Pratt and Whitney R-985 Wasp Jr. from the 40's. It had been sitting in storage for years. We convinced our instructor to let us mount it and run. It took awhile to get the magneto timing figured out. The day we ran it I did one last check of the timing, but failed to check that my top-dead-center indication was on the compression stroke. So, soon as the backfire occurred, i realized what I had ommited, quickly pulled the mags off, re-found tdc, and got the timing right. it started up quickly but a bad oil pressure line kept us from running it more that day. In the week following, it ran great many times. Our smallest guy in class even started it by hand propping. Sadly, no good videos were taken. It was a great experience in A&P school. After this we did turbines and got the j-34 in my other video running.
0:47
My engine test stand Steve T
My engine test stand Steve T
Here is a video of the engine test stand I just completed building from scratch. I used plans from eBay and bought the steel, cut, and welded it all together. Here is it running a Ford 302 V8 engine I plan to rebuild. 8/1/10
5:11
VW Engine and Test Stand
VW Engine and Test Stand
Working on the VW Engine Test Stand. Just finished un-crating the Engine and used a Truck Bed Crane to lift the Engine. Progress on my 1968 Baja Bug.
4:55
Gavilan College Aviation Engine Test Stand Tutorial
Gavilan College Aviation Engine Test Stand Tutorial
Gavilan College Aviation Engine Test Stand Tutorial
3:42
Why we need an engine test stand
Why we need an engine test stand
Two engines my friends started for the first time and seated the rings. There were problems starting each one for the first time. It was funny and my friend was so frustrated, he swore he wouldn't start anymore engines in cars without first starting them on an engine stand to see that all problems were fixed.
1:18
DLE-30 Engine Test Stand Demonstration with APC 18X6W Prop
DLE-30 Engine Test Stand Demonstration with APC 18X6W Prop
This is a demonstration of the new rear-carb DLE-30 engine, running on the RC Sport Flyer thrust test stand, spinning an APC 18X6W 3D/Fun-Fly propeller. This propeller is a bit small (light load) for the DLE-30, but demonstrates the engine's ability to rev, and produces an impressive 19 lb thrust at 8800 RPM.