- published: 16 Feb 2015
- views: 67360
Create your page here
back to playlist
To watch all the videos in this series visit https://www.youtube.com/playlist?list=PLYsWjANuAm4p47OBBTOo4Xr3lNUc8PFpc
In this video we configure and install a MinimOSD onto a Naze32 flight control board.
Download the Arduino software from http://arduino.cc/en/Main/Software
MinimOSD is a very inexpensive way to add a useful, exciting on screen display (OSD) to your first person view (FPV) flights.
MinimOSD can be found in a number of other videos on the channel and these other videos also cover other firmware and additional tricks and tips.
In this video I cover:
- What you need (2:25)
- Connecting the two 5v systems on the board (3:35)
- The Firmware options (4:33)
- Installing the firmware into the MinimOSD (6:20)
- Uploading the fonts (9:43)
- Checking all the settings are right (11:30)
- Explanation of the power system on the MinimOSD (14:02)
- The extra pins you need on the Naze32 (16:33)
- How to connect the MinimOSD to the Naze32 (17:19)
- How to connect the MinimOSD to the video transmitter and camera (20:41)
- A demo of the complete system working (23:36)
If you'd like to see the other firmware option mentioned then visit https://www.youtube.com/watch?v=Xc0BlD1laPg
Thanks for watching, please LIKE and SUBSCRIBE!
Happy flying!
In This Episode, We discuss the Simple Wireing Setup for OSD, Some osds may require Soldering, or reconfiguring of wires. This video will give you the basics and minimum requirements.
If you have any questions or suggestions post them in the comments below. Well do our best to answer them.
Please Don't Forget to Like and Subscribe if this video helped you.
Also Please check out these websites.
www.team-legit.com
www.csfpv.com
Thanks for the Support
- published: 16 Sep 2014
- views: 22837
A song about making things right. iTUNES: http://bit.ly/MyOCDsong
NOTE: We understand that OCD is a serious mental disorder that significantly affects the lives of millions of people (including Rhett's wife). This song is not intended to make fun of people with OCD, but rather to demonstrate and poke fun at the tendency of so many people to point out things that are off-center, off-balance, etc. and say "It's driving my OCD crazy!" We have an extensive discussion about this very thing, as well as what OCD really is, on this episode of Good Mythical Morning: http://youtu.be/-1QeJAmpvGk
Thanks - R&L;
Click CC for lyrics.
RhettAndLINKS-
FACEBOOK! http://facebook.com/rhettandlink
TWITTER! http://twitter.com/rhettandlink
TUMBLR! http://rhettandlink.tumblr.com/
GOOGLE PLUS! https://plus.google.com/+rhettandlinkk
FORUM! http://bit.ly/rlkommunity
CREDITS-
Written & Directed by: Rhett & Link
Music Production by: Mark Byers
Produced by: Stevie Wynne Levine
Director of Photography: Benjamin Eck
Edited by: Benjamin Eck
ADDITIONAL CAST:
Yo Frank as "Sideburns Dude"
ADDITIONAL CREW:
AD: Stevie Wynne Levine
Production/Prop Coordinator: Kendall Kanoa Hawley
Prop Design: Cassie Cobb
AC: Peter Mares
Gaffer: Todd Bishop
Key Grip: Andrew Kowalski
Audio: Rich Gavin
PA: Chris Frederick
PA: Alexander Punch
Production Intern: Chase Hilt
- published: 17 Jun 2014
- views: 22508669
I spied this cheap GPS-based OSD on HobbyKing and thought I'd buy one to review.
http://www.hobbyking.com/hobbyking/store/__19832__Hobbyking_G_OSD_II_Mini_OSD_System_w_GPS_Module.html
The full review will be coming as soon as I can fly again but in the meantime, I thought you might like to enjoy some of the Chinglish that comes with the printed instructions for this device.
- published: 25 Apr 2013
- views: 52778
You can watch all of the APM setup videos here - https://www.youtube.com/watch?v=30cCs4aHdB0&list;=PLYsWjANuAm4oswLMu9OU8yOm-9J6y30XW&index;=1
In this video we add an OSD to an APM 2.6 (also works on 2.5 and 2.7) using the telemetry port on the flight controller itself. no changes are needed to the firmware of setup on the board to do this just the great little $12 board and some cables.
In this video I cover what software you need, how you setup the board so it shows what you want, where you want it and how you cable it up to the APM and your camera and video transmitter.
In this video I cover:
- What you need (0.03)
- Why you will need an FTDI adapter (0:34)
- Downloading the software you need (2:51)
- Flashing the firmware and setup (4:58)
- Configuring the MinimOSD (6:09)
- Wiring to the APM (10:23)
- Best practice for the power system on the MinimOSD (11:20)
- Wiring to the camera and video transmitter (13:21)
- Wiring the entire system up (14:43)
Thanks for watching please LIKE and SUBSCRIBE!
Happy flying!
- published: 13 Mar 2015
- views: 33816
This is my review of the Storm OSD.
It has both pros and cons as you will see throughout this video.
Its a long video , but im sure you guys who are interessted in this OSD
will enjoy see how the OSD behaves during flight.
Be sure to watch the entire video , as im commenting as I fly along and noticing new things.
Enjoy!
- published: 24 Sep 2012
- views: 25379
To see all of the videos in this series visit https://www.youtube.com/playlist?list=PLYsWjANuAm4r-E61stLchCR4bzY3NmDNh
In this video we add a standard MinimOSD to the CC3D to give us a basic on screen display for first person view flying (FPV) This becomes more useful when a GPS is added to the board.
(July 2015) The Openpilot forum is not accepting new members at the moment so if you can't get the hex file from them then here is a link to the copy I downloaded - https://dl.dropboxusercontent.com/u/67301981/minOPOSD_15_02_files.zip
In this video we cover –
- Introduction (0:02)
- The software you need (2:40)
- How to power the board (6:28)
- How to program the MinimOSD (10:12)
- How to connect it to the CC3D (15:54)
- How to setup the CC3D to work with an OSD (17:08)
- How to connect the OSD to the camera and transmitter (18:10)
- A demo of it working (20:00)
- A gotcha and how to fix the ‘SETUP MENU UAVTALK ACTIVE’ screen (21:38)
Thank you for watching, please LIKE and SUBSCRIBE.
Happy flying!
- published: 04 May 2015
- views: 44864
The HobbyKing Mini OSD is a simple and effective unit. I've found the instructions to be quite lacking and the GPS info updates quite slowly in flight, but it's still a nice basic unit to have on board an aircraft.
In this guide video, I show you how to wire the components and go over some settings.
Learn more: http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=29798&aff;=1220394
---
SonicOrbStudios
Dave@SonicOrbStudios.com
http://instagram.com/sonicorbstudios
http://twitter.com/sonicorbstudios
https://plus.google.com/+SonicorbstudiosOfficial/posts
http://socialblade.com/youtube/user/sonicorbstudios
---
- published: 09 Jun 2014
- views: 25447
New model available here:
http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=36844&aff;=754418
Marc has a closer look at a clone of the Minim OSD v0.1, its problems, setup and how it compares to the genuine DIYDrones v1.1. Includes where to find all the info on the web.
- published: 01 Jan 2013
- views: 69596
You read the title right. I got this OSD unit with GPS for $25. Of course, I was slightly skeptical but I bought it anyway. I installed it to my DJI F450 quadcopter and gave it a try. Find out what you get for $25 and see if it's worth buying.
Gear:
Mini OSD: Hobbyking.com
GoPro Hero 3: http://goo.gl/g2xioK
Fatshark Teleporter V3: http://goo.gl/GcwXwi
DJI F450: http://goo.gl/bG9BPE
DX6i: http://goo.gl/c4Yj9L
600mW Immersion video TX: http://goo.gl/fTSnPt
- published: 29 Sep 2014
- views: 17538
- Loading...
-
25:43(3/8) Naze32 Flight Controller - Adding an OSD using MinimOSD
(3/8) Naze32 Flight Controller - Adding an OSD using MinimOSD(3/8) Naze32 Flight Controller - Adding an OSD using MinimOSD
To watch all the videos in this series visit https://www.youtube.com/playlist?list=PLYsWjANuAm4p47OBBTOo4Xr3lNUc8PFpc In this video we configure and install a MinimOSD onto a Naze32 flight control board. Download the Arduino software from http://arduino.cc/en/Main/Software MinimOSD is a very inexpensive way to add a useful, exciting on screen display (OSD) to your first person view (FPV) flights. MinimOSD can be found in a number of other videos on the channel and these other videos also cover other firmware and additional tricks and tips. In this video I cover: - What you need (2:25) - Connecting the two 5v systems on the board (3:35) - The Firmware options (4:33) - Installing the firmware into the MinimOSD (6:20) - Uploading the fonts (9:43) - Checking all the settings are right (11:30) - Explanation of the power system on the MinimOSD (14:02) - The extra pins you need on the Naze32 (16:33) - How to connect the MinimOSD to the Naze32 (17:19) - How to connect the MinimOSD to the video transmitter and camera (20:41) - A demo of the complete system working (23:36) If you'd like to see the other firmware option mentioned then visit https://www.youtube.com/watch?v=Xc0BlD1laPg Thanks for watching, please LIKE and SUBSCRIBE! Happy flying! -
14:56FPV Series Episode 6: Simple OSD Wiring
FPV Series Episode 6: Simple OSD WiringFPV Series Episode 6: Simple OSD Wiring
In This Episode, We discuss the Simple Wireing Setup for OSD, Some osds may require Soldering, or reconfiguring of wires. This video will give you the basics and minimum requirements. If you have any questions or suggestions post them in the comments below. Well do our best to answer them. Please Don't Forget to Like and Subscribe if this video helped you. Also Please check out these websites. www.team-legit.com www.csfpv.com Thanks for the Support -
4:42My OCD (Song)
My OCD (Song)My OCD (Song)
A song about making things right. iTUNES: http://bit.ly/MyOCDsong NOTE: We understand that OCD is a serious mental disorder that significantly affects the lives of millions of people (including Rhett's wife). This song is not intended to make fun of people with OCD, but rather to demonstrate and poke fun at the tendency of so many people to point out things that are off-center, off-balance, etc. and say "It's driving my OCD crazy!" We have an extensive discussion about this very thing, as well as what OCD really is, on this episode of Good Mythical Morning: http://youtu.be/-1QeJAmpvGk Thanks - R&L; Click CC for lyrics. RhettAndLINKS- FACEBOOK! http://facebook.com/rhettandlink TWITTER! http://twitter.com/rhettandlink TUMBLR! http://rhettandlink.tumblr.com/ GOOGLE PLUS! https://plus.google.com/+rhettandlinkk FORUM! http://bit.ly/rlkommunity CREDITS- Written & Directed by: Rhett & Link Music Production by: Mark Byers Produced by: Stevie Wynne Levine Director of Photography: Benjamin Eck Edited by: Benjamin Eck ADDITIONAL CAST: Yo Frank as "Sideburns Dude" ADDITIONAL CREW: AD: Stevie Wynne Levine Production/Prop Coordinator: Kendall Kanoa Hawley Prop Design: Cassie Cobb AC: Peter Mares Gaffer: Todd Bishop Key Grip: Andrew Kowalski Audio: Rich Gavin PA: Chris Frederick PA: Alexander Punch Production Intern: Chase Hilt -
5:27A cheap GPS OSD (part 1)
A cheap GPS OSD (part 1)A cheap GPS OSD (part 1)
I spied this cheap GPS-based OSD on HobbyKing and thought I'd buy one to review. http://www.hobbyking.com/hobbyking/store/__19832__Hobbyking_G_OSD_II_Mini_OSD_System_w_GPS_Module.html The full review will be coming as soon as I can fly again but in the meantime, I thought you might like to enjoy some of the Chinglish that comes with the printed instructions for this device. -
17:45APM 2.5/2.6/2.7 - Adding an OSD for FPV using MinimOSD - complete setup
APM 2.5/2.6/2.7 - Adding an OSD for FPV using MinimOSD - complete setupAPM 2.5/2.6/2.7 - Adding an OSD for FPV using MinimOSD - complete setup
You can watch all of the APM setup videos here - https://www.youtube.com/watch?v=30cCs4aHdB0&list;=PLYsWjANuAm4oswLMu9OU8yOm-9J6y30XW&index;=1 In this video we add an OSD to an APM 2.6 (also works on 2.5 and 2.7) using the telemetry port on the flight controller itself. no changes are needed to the firmware of setup on the board to do this just the great little $12 board and some cables. In this video I cover what software you need, how you setup the board so it shows what you want, where you want it and how you cable it up to the APM and your camera and video transmitter. In this video I cover: - What you need (0.03) - Why you will need an FTDI adapter (0:34) - Downloading the software you need (2:51) - Flashing the firmware and setup (4:58) - Configuring the MinimOSD (6:09) - Wiring to the APM (10:23) - Best practice for the power system on the MinimOSD (11:20) - Wiring to the camera and video transmitter (13:21) - Wiring the entire system up (14:43) Thanks for watching please LIKE and SUBSCRIBE! Happy flying! -
25:39(7/9) Seriously Pro F3 (SP3) Series - Adding an OSD for FPV using a MinimOSD
(7/9) Seriously Pro F3 (SP3) Series - Adding an OSD for FPV using a MinimOSD(7/9) Seriously Pro F3 (SP3) Series - Adding an OSD for FPV using a MinimOSD
To see all of the videos in the playlist visit https://www.youtube.com/playlist?list=PLYsWjANuAm4ro1vHztauuHFaelUDCOwqw You can download the manual and find out more by visiting http://seriouslypro.com/ Thanks for watching. Please LIKE and SUBSCRIBE. Happy flying! -
3:47Vector FPV Controller with Full Color OSD on a Funjet
Vector FPV Controller with Full Color OSD on a Funjet -
14:39Cyclops Storm OSD flight review
Cyclops Storm OSD flight reviewCyclops Storm OSD flight review
This is my review of the Storm OSD. It has both pros and cons as you will see throughout this video. Its a long video , but im sure you guys who are interessted in this OSD will enjoy see how the OSD behaves during flight. Be sure to watch the entire video , as im commenting as I fly along and noticing new things. Enjoy! -
22:43(4/10) CC3D Flight Controller - Adding an OSD using MinimOSD
(4/10) CC3D Flight Controller - Adding an OSD using MinimOSD(4/10) CC3D Flight Controller - Adding an OSD using MinimOSD
To see all of the videos in this series visit https://www.youtube.com/playlist?list=PLYsWjANuAm4r-E61stLchCR4bzY3NmDNh In this video we add a standard MinimOSD to the CC3D to give us a basic on screen display for first person view flying (FPV) This becomes more useful when a GPS is added to the board. (July 2015) The Openpilot forum is not accepting new members at the moment so if you can't get the hex file from them then here is a link to the copy I downloaded - https://dl.dropboxusercontent.com/u/67301981/minOPOSD_15_02_files.zip In this video we cover – - Introduction (0:02) - The software you need (2:40) - How to power the board (6:28) - How to program the MinimOSD (10:12) - How to connect it to the CC3D (15:54) - How to setup the CC3D to work with an OSD (17:08) - How to connect the OSD to the camera and transmitter (18:10) - A demo of it working (20:00) - A gotcha and how to fix the ‘SETUP MENU UAVTALK ACTIVE’ screen (21:38) Thank you for watching, please LIKE and SUBSCRIBE. Happy flying! -
8:41HobbyKing Mini OSD Setup Guide
HobbyKing Mini OSD Setup GuideHobbyKing Mini OSD Setup Guide
The HobbyKing Mini OSD is a simple and effective unit. I've found the instructions to be quite lacking and the GPS info updates quite slowly in flight, but it's still a nice basic unit to have on board an aircraft. In this guide video, I show you how to wire the components and go over some settings. Learn more: http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=29798&aff;=1220394 --- SonicOrbStudios Dave@SonicOrbStudios.com http://instagram.com/sonicorbstudios http://twitter.com/sonicorbstudios https://plus.google.com/+SonicorbstudiosOfficial/posts http://socialblade.com/youtube/user/sonicorbstudios --- -
21:25Minim OSD. On screen heads up display for FPV. DIYDrones and HobbyKing. Review. RCHacker #14
Minim OSD. On screen heads up display for FPV. DIYDrones and HobbyKing. Review. RCHacker #14Minim OSD. On screen heads up display for FPV. DIYDrones and HobbyKing. Review. RCHacker #14
New model available here: http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=36844&aff;=754418 Marc has a closer look at a clone of the Minim OSD v0.1, its problems, setup and how it compares to the genuine DIYDrones v1.1. Includes where to find all the info on the web. -
5:38$25 Mini OSD: Review
$25 Mini OSD: Review$25 Mini OSD: Review
You read the title right. I got this OSD unit with GPS for $25. Of course, I was slightly skeptical but I bought it anyway. I installed it to my DJI F450 quadcopter and gave it a try. Find out what you get for $25 and see if it's worth buying. Gear: Mini OSD: Hobbyking.com GoPro Hero 3: http://goo.gl/g2xioK Fatshark Teleporter V3: http://goo.gl/GcwXwi DJI F450: http://goo.gl/bG9BPE DX6i: http://goo.gl/c4Yj9L 600mW Immersion video TX: http://goo.gl/fTSnPt -
11:44MinimOSD Micro - Overview and Demonstration (KV Team mods)
MinimOSD Micro - Overview and Demonstration (KV Team mods)MinimOSD Micro - Overview and Demonstration (KV Team mods)
In this video we will take a quick look at the excellent new version of the MinimOSD board – the MinimOSD Micro. This is one of the latest versions of the board and not only includes the excellent KV Team mods but also is only 15mm square. The KV Mods allow you to connect your flight battery, current sensor, RSSI inputs and others directly to the board without the need for resistor bridges or fussy soldering. If you are interested in seeing more of this board (and its cousins) in actions connected to boards like the APM, Naze32 and Multiwii you can watch the MinimOSD series on my channel – https://www.youtube.com/playlist?list=PLYsWjANuAm4qfxLkr_RLlSF3qh_AwLYIT Thanks for watching, please LIKE and SUBSCRIBE! Happy flying! -
18:32OSD ZB2 Paarpruefung Muendlich
OSD ZB2 Paarpruefung MuendlichOSD ZB2 Paarpruefung Muendlich
-
(3/8) Naze32 Flight Controller - Adding an OSD using MinimOSD
To watch all the videos in this series visit https://www.youtube.com/playlist?list=PLYsWjANuAm4p47OBBTOo4Xr3lNUc8PFpc In this video we configure and install a MinimOSD onto a Naze32 flight control board. Download the Arduino software from http://arduino.cc/en/Main/Software MinimOSD is a very inexpensive way to add a useful, exciting on screen display (OSD) to your first person view (FPV) flights. MinimOSD can be found in a number of other videos on the channel and these other videos also cover other firmware and additional tricks and tips. In this video I cover: - What you need (2:25) - Connecting the two 5v systems on the board (3:35) - The Firmware options (4:33) - Installing the firmware into the MinimOSD (6:20) - Uploading the fonts (9:43) - Checking all the settings are ri... -
FPV Series Episode 6: Simple OSD Wiring
In This Episode, We discuss the Simple Wireing Setup for OSD, Some osds may require Soldering, or reconfiguring of wires. This video will give you the basics and minimum requirements. If you have any questions or suggestions post them in the comments below. Well do our best to answer them. Please Don't Forget to Like and Subscribe if this video helped you. Also Please check out these websites. www.team-legit.com www.csfpv.com Thanks for the Support -
My OCD (Song)
A song about making things right. iTUNES: http://bit.ly/MyOCDsong NOTE: We understand that OCD is a serious mental disorder that significantly affects the lives of millions of people (including Rhett's wife). This song is not intended to make fun of people with OCD, but rather to demonstrate and poke fun at the tendency of so many people to point out things that are off-center, off-balance, etc. and say "It's driving my OCD crazy!" We have an extensive discussion about this very thing, as well as what OCD really is, on this episode of Good Mythical Morning: http://youtu.be/-1QeJAmpvGk Thanks - R&L; Click CC for lyrics. RhettAndLINKS- FACEBOOK! http://facebook.com/rhettandlink TWITTER! http://twitter.com/rhettandlink T... -
A cheap GPS OSD (part 1)
I spied this cheap GPS-based OSD on HobbyKing and thought I'd buy one to review. http://www.hobbyking.com/hobbyking/store/__19832__Hobbyking_G_OSD_II_Mini_OSD_System_w_GPS_Module.html The full review will be coming as soon as I can fly again but in the meantime, I thought you might like to enjoy some of the Chinglish that comes with the printed instructions for this device. -
APM 2.5/2.6/2.7 - Adding an OSD for FPV using MinimOSD - complete setup
You can watch all of the APM setup videos here - https://www.youtube.com/watch?v=30cCs4aHdB0&list;=PLYsWjANuAm4oswLMu9OU8yOm-9J6y30XW&index;=1 In this video we add an OSD to an APM 2.6 (also works on 2.5 and 2.7) using the telemetry port on the flight controller itself. no changes are needed to the firmware of setup on the board to do this just the great little $12 board and some cables. In this video I cover what software you need, how you setup the board so it shows what you want, where you want it and how you cable it up to the APM and your camera and video transmitter. In this video I cover: - What you need (0.03) - Why you will need an FTDI adapter (0:34) - Downloading the software you need (2:51) - Flashing the firmware and setup (4:58) - Configuring the MinimOSD (6:09) - Wiring to ... -
(7/9) Seriously Pro F3 (SP3) Series - Adding an OSD for FPV using a MinimOSD
To see all of the videos in the playlist visit https://www.youtube.com/playlist?list=PLYsWjANuAm4ro1vHztauuHFaelUDCOwqw You can download the manual and find out more by visiting http://seriouslypro.com/ Thanks for watching. Please LIKE and SUBSCRIBE. Happy flying! -
-
Cyclops Storm OSD flight review
This is my review of the Storm OSD. It has both pros and cons as you will see throughout this video. Its a long video , but im sure you guys who are interessted in this OSD will enjoy see how the OSD behaves during flight. Be sure to watch the entire video , as im commenting as I fly along and noticing new things. Enjoy! -
(4/10) CC3D Flight Controller - Adding an OSD using MinimOSD
To see all of the videos in this series visit https://www.youtube.com/playlist?list=PLYsWjANuAm4r-E61stLchCR4bzY3NmDNh In this video we add a standard MinimOSD to the CC3D to give us a basic on screen display for first person view flying (FPV) This becomes more useful when a GPS is added to the board. (July 2015) The Openpilot forum is not accepting new members at the moment so if you can't get the hex file from them then here is a link to the copy I downloaded - https://dl.dropboxusercontent.com/u/67301981/minOPOSD_15_02_files.zip In this video we cover – - Introduction (0:02) - The software you need (2:40) - How to power the board (6:28) - How to program the MinimOSD (10:12) - How to connect it to the CC3D (15:54) - How to setup the CC3D to work with an OSD (17:08) - How to connect t... -
HobbyKing Mini OSD Setup Guide
The HobbyKing Mini OSD is a simple and effective unit. I've found the instructions to be quite lacking and the GPS info updates quite slowly in flight, but it's still a nice basic unit to have on board an aircraft. In this guide video, I show you how to wire the components and go over some settings. Learn more: http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=29798&aff;=1220394 --- SonicOrbStudios Dave@SonicOrbStudios.com http://instagram.com/sonicorbstudios http://twitter.com/sonicorbstudios https://plus.google.com/+SonicorbstudiosOfficial/posts http://socialblade.com/youtube/user/sonicorbstudios --- -
Minim OSD. On screen heads up display for FPV. DIYDrones and HobbyKing. Review. RCHacker #14
New model available here: http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=36844&aff;=754418 Marc has a closer look at a clone of the Minim OSD v0.1, its problems, setup and how it compares to the genuine DIYDrones v1.1. Includes where to find all the info on the web. -
$25 Mini OSD: Review
You read the title right. I got this OSD unit with GPS for $25. Of course, I was slightly skeptical but I bought it anyway. I installed it to my DJI F450 quadcopter and gave it a try. Find out what you get for $25 and see if it's worth buying. Gear: Mini OSD: Hobbyking.com GoPro Hero 3: http://goo.gl/g2xioK Fatshark Teleporter V3: http://goo.gl/GcwXwi DJI F450: http://goo.gl/bG9BPE DX6i: http://goo.gl/c4Yj9L 600mW Immersion video TX: http://goo.gl/fTSnPt -
MinimOSD Micro - Overview and Demonstration (KV Team mods)
In this video we will take a quick look at the excellent new version of the MinimOSD board – the MinimOSD Micro. This is one of the latest versions of the board and not only includes the excellent KV Team mods but also is only 15mm square. The KV Mods allow you to connect your flight battery, current sensor, RSSI inputs and others directly to the board without the need for resistor bridges or fussy soldering. If you are interested in seeing more of this board (and its cousins) in actions connected to boards like the APM, Naze32 and Multiwii you can watch the MinimOSD series on my channel – https://www.youtube.com/playlist?list=PLYsWjANuAm4qfxLkr_RLlSF3qh_AwLYIT Thanks for watching, please LIKE and SUBSCRIBE! Happy flying! -
OSD ZB2 Paarpruefung Muendlich
-
-
-
-
How to Setup KV OSD MinimOSD Naze32
KVOSD alternative firmware based on the original MinimOSD project by Sandro Benigno. https://code.google.com/p/arducam-osd/wiki/minimosd == Chapter Index == 0:25 Commentary 11:44 Gearing up 15:51 MinimOSD Hardware Overview 19:12 KV Team board Overview 24:18 Working with Sensors and Signals - RC Filters/PWM 32:03 Voltage Dividers 37:52 Current Sensing 43:47 Tips on Fine Pitch Soldering 46:54 Sample Wiring Diagram 52:20 Quad Walkthrough 56:33 Setting up GPS 1:00:50 Flashing the Firmware 1:08:17 KV OSD GUI Overview 1:15:11 OSD Configuration via Transmitter Sticks 1:24:32 Working with RSSI Signals 1:27:07 Calibrating RSSI 1:32:40 Post commentary - be safe and enjoy your new fancy OSD :) === Everything you never wanted to know about MinimOSD and the KV Team OSD firmware :) Keep submitting ... -
Beginners FPV Guide -- Adding an OSD to FPV System
Wonderful world of FPV (First Person View) flying is simply a fascinating hobby and the simplest and safest way to make your flying dream come true. But when it comes to starting with this hobby, most of the Beginners are just left there with big questions only and totally pro level information that does nothing but confusing them. Keeping this in mind I put up a written version of Beginners FPV guide at my site, downloadable here http://onlyflyingmachines.com/FPVGuide.html and then as promised this video version, the Video Series of AliShanMao's beginners FPV Guide is now started. This is AliShanMao Beginners Guide to FPV Part 6. In this part you will watch how to add an OSD and GPS to your basic FPV system (Video tx and Camera) that we put together in previous video and install in on the... -
Cheapest FPV OSD with GPS Distance
The G-OSD3 from HobbyKing is probably the cheapest OSD (On Screen Display) for FPV (First Person View) Flying which displays accurate LOS distance by GPS. At 40bucks, you get readings of batteries' voltages, altitude, distance ran and a graphical illustration showing where your base position is. The base is denoted by letter "B" which keeps moving around your aircraft which is an inverted "T" letter. This is a useful feature which allows you to navigate back home. Even on the ground, the accuracy of this feature is seen at more than 25m away from the starting position. When the base ("B") is at 6 o'clock, I turned my quadcopter 180 degrees and immediately the "B" moved to 12 o'clock, which is pretty impressive. My only complaint are the current reading is inactive (can't program it to work... -
APM Mini 3.1 - Adding an OSD for FPV using MinimOSD - complete setup
You can watch all of the APM setup videos here - https://www.youtube.com/playlist?list=PLYsWjANuAm4pCP3jjSAcmDJIEmyaEregs In this video we add an OSD to an APM 3.1 (also works on 2.5 and 2.7) using the telemetry port on the flight controller itself. no changes are needed to the firmware of setup on the board to do this just the great little $12 board and some cables. In this video I coevr what software you need, how you setup the board so it shows what you want, where you want it and how you cable it up to the APM and your camera and video transmitter. In this video I cover: - What you need - Why you will need an FTDI adapter - Downloading the software you need - Flashing the firmware and setup - Configuring the MinimOSD - Wiring to the APM - Best practice for the power system on th... -
HobbyKing Mini OSD, G-OSD, Adding GPS Home Arrow Firmware
HK $25 Mini OSD w/GPS. Upgrade firmware to get RTH Home Arrow. (Used Windows 7, ExtremeBurner would not run on Win 8 for me.) Product Page http://www.hobbyking.com/hobbyking/store/__29798__Mini_OSD_System_w_GPS_Module.html Firmware for flashing http://www.rcgroups.com/forums/showpost.php?p=21163569&postcount;=1349 Board PinOut http://www.rcgroups.com/forums/showpost.php?p=19072579&postcount;=8 Extreme Burner Software http://win.cutephp.com/extreme_burner_avr_674689 -
Hobbyking G-OSD 3 Mini OSD System
testing my new gadget on the F550 Hexacopter. Another great purchase from Hobbyking! I love seeing all the cool info on my monitor. Very happy :) Click here for HD footage from gopro: http://youtu.be/A8k_mocE2iY Parts list: http://bitly.com/bundles/o_7gj8asgonj/3
(3/8) Naze32 Flight Controller - Adding an OSD using MinimOSD
- Order: Reorder
- Duration: 25:43
- Updated: 16 Feb 2015
- views: 67360
To watch all the videos in this series visit https://www.youtube.com/playlist?list=PLYsWjANuAm4p47OBBTOo4Xr3lNUc8PFpc
In this video we configure and install a ...
To watch all the videos in this series visit https://www.youtube.com/playlist?list=PLYsWjANuAm4p47OBBTOo4Xr3lNUc8PFpc
In this video we configure and install a MinimOSD onto a Naze32 flight control board.
Download the Arduino software from http://arduino.cc/en/Main/Software
MinimOSD is a very inexpensive way to add a useful, exciting on screen display (OSD) to your first person view (FPV) flights.
MinimOSD can be found in a number of other videos on the channel and these other videos also cover other firmware and additional tricks and tips.
In this video I cover:
- What you need (2:25)
- Connecting the two 5v systems on the board (3:35)
- The Firmware options (4:33)
- Installing the firmware into the MinimOSD (6:20)
- Uploading the fonts (9:43)
- Checking all the settings are right (11:30)
- Explanation of the power system on the MinimOSD (14:02)
- The extra pins you need on the Naze32 (16:33)
- How to connect the MinimOSD to the Naze32 (17:19)
- How to connect the MinimOSD to the video transmitter and camera (20:41)
- A demo of the complete system working (23:36)
If you'd like to see the other firmware option mentioned then visit https://www.youtube.com/watch?v=Xc0BlD1laPg
Thanks for watching, please LIKE and SUBSCRIBE!
Happy flying!
wn.com/(3 8) Naze32 Flight Controller Adding An Osd Using Minimosd
To watch all the videos in this series visit https://www.youtube.com/playlist?list=PLYsWjANuAm4p47OBBTOo4Xr3lNUc8PFpc
In this video we configure and install a MinimOSD onto a Naze32 flight control board.
Download the Arduino software from http://arduino.cc/en/Main/Software
MinimOSD is a very inexpensive way to add a useful, exciting on screen display (OSD) to your first person view (FPV) flights.
MinimOSD can be found in a number of other videos on the channel and these other videos also cover other firmware and additional tricks and tips.
In this video I cover:
- What you need (2:25)
- Connecting the two 5v systems on the board (3:35)
- The Firmware options (4:33)
- Installing the firmware into the MinimOSD (6:20)
- Uploading the fonts (9:43)
- Checking all the settings are right (11:30)
- Explanation of the power system on the MinimOSD (14:02)
- The extra pins you need on the Naze32 (16:33)
- How to connect the MinimOSD to the Naze32 (17:19)
- How to connect the MinimOSD to the video transmitter and camera (20:41)
- A demo of the complete system working (23:36)
If you'd like to see the other firmware option mentioned then visit https://www.youtube.com/watch?v=Xc0BlD1laPg
Thanks for watching, please LIKE and SUBSCRIBE!
Happy flying!
- published: 16 Feb 2015
- views: 67360
FPV Series Episode 6: Simple OSD Wiring
- Order: Reorder
- Duration: 14:56
- Updated: 16 Sep 2014
- views: 22837
In This Episode, We discuss the Simple Wireing Setup for OSD, Some osds may require Soldering, or reconfiguring of wires. This video will give you the basics an...
In This Episode, We discuss the Simple Wireing Setup for OSD, Some osds may require Soldering, or reconfiguring of wires. This video will give you the basics and minimum requirements.
If you have any questions or suggestions post them in the comments below. Well do our best to answer them.
Please Don't Forget to Like and Subscribe if this video helped you.
Also Please check out these websites.
www.team-legit.com
www.csfpv.com
Thanks for the Support
wn.com/Fpv Series Episode 6 Simple Osd Wiring
In This Episode, We discuss the Simple Wireing Setup for OSD, Some osds may require Soldering, or reconfiguring of wires. This video will give you the basics and minimum requirements.
If you have any questions or suggestions post them in the comments below. Well do our best to answer them.
Please Don't Forget to Like and Subscribe if this video helped you.
Also Please check out these websites.
www.team-legit.com
www.csfpv.com
Thanks for the Support
- published: 16 Sep 2014
- views: 22837
My OCD (Song)
- Order: Reorder
- Duration: 4:42
- Updated: 17 Jun 2014
- views: 22508669
A song about making things right. iTUNES: http://bit.ly/MyOCDsong
NOTE: We understand that OCD is a serious mental disorder that significantly affects the liv...
A song about making things right. iTUNES: http://bit.ly/MyOCDsong
NOTE: We understand that OCD is a serious mental disorder that significantly affects the lives of millions of people (including Rhett's wife). This song is not intended to make fun of people with OCD, but rather to demonstrate and poke fun at the tendency of so many people to point out things that are off-center, off-balance, etc. and say "It's driving my OCD crazy!" We have an extensive discussion about this very thing, as well as what OCD really is, on this episode of Good Mythical Morning: http://youtu.be/-1QeJAmpvGk
Thanks - R&L;
Click CC for lyrics.
RhettAndLINKS-
FACEBOOK! http://facebook.com/rhettandlink
TWITTER! http://twitter.com/rhettandlink
TUMBLR! http://rhettandlink.tumblr.com/
GOOGLE PLUS! https://plus.google.com/+rhettandlinkk
FORUM! http://bit.ly/rlkommunity
CREDITS-
Written & Directed by: Rhett & Link
Music Production by: Mark Byers
Produced by: Stevie Wynne Levine
Director of Photography: Benjamin Eck
Edited by: Benjamin Eck
ADDITIONAL CAST:
Yo Frank as "Sideburns Dude"
ADDITIONAL CREW:
AD: Stevie Wynne Levine
Production/Prop Coordinator: Kendall Kanoa Hawley
Prop Design: Cassie Cobb
AC: Peter Mares
Gaffer: Todd Bishop
Key Grip: Andrew Kowalski
Audio: Rich Gavin
PA: Chris Frederick
PA: Alexander Punch
Production Intern: Chase Hilt
wn.com/My Ocd (Song)
A song about making things right. iTUNES: http://bit.ly/MyOCDsong
NOTE: We understand that OCD is a serious mental disorder that significantly affects the lives of millions of people (including Rhett's wife). This song is not intended to make fun of people with OCD, but rather to demonstrate and poke fun at the tendency of so many people to point out things that are off-center, off-balance, etc. and say "It's driving my OCD crazy!" We have an extensive discussion about this very thing, as well as what OCD really is, on this episode of Good Mythical Morning: http://youtu.be/-1QeJAmpvGk
Thanks - R&L;
Click CC for lyrics.
RhettAndLINKS-
FACEBOOK! http://facebook.com/rhettandlink
TWITTER! http://twitter.com/rhettandlink
TUMBLR! http://rhettandlink.tumblr.com/
GOOGLE PLUS! https://plus.google.com/+rhettandlinkk
FORUM! http://bit.ly/rlkommunity
CREDITS-
Written & Directed by: Rhett & Link
Music Production by: Mark Byers
Produced by: Stevie Wynne Levine
Director of Photography: Benjamin Eck
Edited by: Benjamin Eck
ADDITIONAL CAST:
Yo Frank as "Sideburns Dude"
ADDITIONAL CREW:
AD: Stevie Wynne Levine
Production/Prop Coordinator: Kendall Kanoa Hawley
Prop Design: Cassie Cobb
AC: Peter Mares
Gaffer: Todd Bishop
Key Grip: Andrew Kowalski
Audio: Rich Gavin
PA: Chris Frederick
PA: Alexander Punch
Production Intern: Chase Hilt
- published: 17 Jun 2014
- views: 22508669
A cheap GPS OSD (part 1)
- Order: Reorder
- Duration: 5:27
- Updated: 25 Apr 2013
- views: 52778
I spied this cheap GPS-based OSD on HobbyKing and thought I'd buy one to review.
http://www.hobbyking.com/hobbyking/store/__19832__Hobbyking_G_OSD_II_Mini_OSD_...
I spied this cheap GPS-based OSD on HobbyKing and thought I'd buy one to review.
http://www.hobbyking.com/hobbyking/store/__19832__Hobbyking_G_OSD_II_Mini_OSD_System_w_GPS_Module.html
The full review will be coming as soon as I can fly again but in the meantime, I thought you might like to enjoy some of the Chinglish that comes with the printed instructions for this device.
wn.com/A Cheap Gps Osd (Part 1)
I spied this cheap GPS-based OSD on HobbyKing and thought I'd buy one to review.
http://www.hobbyking.com/hobbyking/store/__19832__Hobbyking_G_OSD_II_Mini_OSD_System_w_GPS_Module.html
The full review will be coming as soon as I can fly again but in the meantime, I thought you might like to enjoy some of the Chinglish that comes with the printed instructions for this device.
- published: 25 Apr 2013
- views: 52778
APM 2.5/2.6/2.7 - Adding an OSD for FPV using MinimOSD - complete setup
- Order: Reorder
- Duration: 17:45
- Updated: 13 Mar 2015
- views: 33816
You can watch all of the APM setup videos here - https://www.youtube.com/watch?v=30cCs4aHdB0&list;=PLYsWjANuAm4oswLMu9OU8yOm-9J6y30XW&index;=1
In this video we a...
You can watch all of the APM setup videos here - https://www.youtube.com/watch?v=30cCs4aHdB0&list;=PLYsWjANuAm4oswLMu9OU8yOm-9J6y30XW&index;=1
In this video we add an OSD to an APM 2.6 (also works on 2.5 and 2.7) using the telemetry port on the flight controller itself. no changes are needed to the firmware of setup on the board to do this just the great little $12 board and some cables.
In this video I cover what software you need, how you setup the board so it shows what you want, where you want it and how you cable it up to the APM and your camera and video transmitter.
In this video I cover:
- What you need (0.03)
- Why you will need an FTDI adapter (0:34)
- Downloading the software you need (2:51)
- Flashing the firmware and setup (4:58)
- Configuring the MinimOSD (6:09)
- Wiring to the APM (10:23)
- Best practice for the power system on the MinimOSD (11:20)
- Wiring to the camera and video transmitter (13:21)
- Wiring the entire system up (14:43)
Thanks for watching please LIKE and SUBSCRIBE!
Happy flying!
wn.com/Apm 2.5 2.6 2.7 Adding An Osd For Fpv Using Minimosd Complete Setup
You can watch all of the APM setup videos here - https://www.youtube.com/watch?v=30cCs4aHdB0&list;=PLYsWjANuAm4oswLMu9OU8yOm-9J6y30XW&index;=1
In this video we add an OSD to an APM 2.6 (also works on 2.5 and 2.7) using the telemetry port on the flight controller itself. no changes are needed to the firmware of setup on the board to do this just the great little $12 board and some cables.
In this video I cover what software you need, how you setup the board so it shows what you want, where you want it and how you cable it up to the APM and your camera and video transmitter.
In this video I cover:
- What you need (0.03)
- Why you will need an FTDI adapter (0:34)
- Downloading the software you need (2:51)
- Flashing the firmware and setup (4:58)
- Configuring the MinimOSD (6:09)
- Wiring to the APM (10:23)
- Best practice for the power system on the MinimOSD (11:20)
- Wiring to the camera and video transmitter (13:21)
- Wiring the entire system up (14:43)
Thanks for watching please LIKE and SUBSCRIBE!
Happy flying!
- published: 13 Mar 2015
- views: 33816
(7/9) Seriously Pro F3 (SP3) Series - Adding an OSD for FPV using a MinimOSD
- Order: Reorder
- Duration: 25:39
- Updated: 15 Oct 2015
- views: 6591
To see all of the videos in the playlist visit https://www.youtube.com/playlist?list=PLYsWjANuAm4ro1vHztauuHFaelUDCOwqw
You can download the manual and find ou...
To see all of the videos in the playlist visit https://www.youtube.com/playlist?list=PLYsWjANuAm4ro1vHztauuHFaelUDCOwqw
You can download the manual and find out more by visiting http://seriouslypro.com/
Thanks for watching. Please LIKE and SUBSCRIBE.
Happy flying!
wn.com/(7 9) Seriously Pro F3 (Sp3) Series Adding An Osd For Fpv Using A Minimosd
Vector FPV Controller with Full Color OSD on a Funjet
- Order: Reorder
- Duration: 3:47
- Updated: 09 Nov 2013
- views: 35731
Cyclops Storm OSD flight review
- Order: Reorder
- Duration: 14:39
- Updated: 24 Sep 2012
- views: 25379
This is my review of the Storm OSD.
It has both pros and cons as you will see throughout this video.
Its a long video , but im sure you guys who are interessted...
This is my review of the Storm OSD.
It has both pros and cons as you will see throughout this video.
Its a long video , but im sure you guys who are interessted in this OSD
will enjoy see how the OSD behaves during flight.
Be sure to watch the entire video , as im commenting as I fly along and noticing new things.
Enjoy!
wn.com/Cyclops Storm Osd Flight Review
This is my review of the Storm OSD.
It has both pros and cons as you will see throughout this video.
Its a long video , but im sure you guys who are interessted in this OSD
will enjoy see how the OSD behaves during flight.
Be sure to watch the entire video , as im commenting as I fly along and noticing new things.
Enjoy!
- published: 24 Sep 2012
- views: 25379
(4/10) CC3D Flight Controller - Adding an OSD using MinimOSD
- Order: Reorder
- Duration: 22:43
- Updated: 04 May 2015
- views: 44864
To see all of the videos in this series visit https://www.youtube.com/playlist?list=PLYsWjANuAm4r-E61stLchCR4bzY3NmDNh
In this video we add a standard MinimOSD...
To see all of the videos in this series visit https://www.youtube.com/playlist?list=PLYsWjANuAm4r-E61stLchCR4bzY3NmDNh
In this video we add a standard MinimOSD to the CC3D to give us a basic on screen display for first person view flying (FPV) This becomes more useful when a GPS is added to the board.
(July 2015) The Openpilot forum is not accepting new members at the moment so if you can't get the hex file from them then here is a link to the copy I downloaded - https://dl.dropboxusercontent.com/u/67301981/minOPOSD_15_02_files.zip
In this video we cover –
- Introduction (0:02)
- The software you need (2:40)
- How to power the board (6:28)
- How to program the MinimOSD (10:12)
- How to connect it to the CC3D (15:54)
- How to setup the CC3D to work with an OSD (17:08)
- How to connect the OSD to the camera and transmitter (18:10)
- A demo of it working (20:00)
- A gotcha and how to fix the ‘SETUP MENU UAVTALK ACTIVE’ screen (21:38)
Thank you for watching, please LIKE and SUBSCRIBE.
Happy flying!
wn.com/(4 10) Cc3D Flight Controller Adding An Osd Using Minimosd
To see all of the videos in this series visit https://www.youtube.com/playlist?list=PLYsWjANuAm4r-E61stLchCR4bzY3NmDNh
In this video we add a standard MinimOSD to the CC3D to give us a basic on screen display for first person view flying (FPV) This becomes more useful when a GPS is added to the board.
(July 2015) The Openpilot forum is not accepting new members at the moment so if you can't get the hex file from them then here is a link to the copy I downloaded - https://dl.dropboxusercontent.com/u/67301981/minOPOSD_15_02_files.zip
In this video we cover –
- Introduction (0:02)
- The software you need (2:40)
- How to power the board (6:28)
- How to program the MinimOSD (10:12)
- How to connect it to the CC3D (15:54)
- How to setup the CC3D to work with an OSD (17:08)
- How to connect the OSD to the camera and transmitter (18:10)
- A demo of it working (20:00)
- A gotcha and how to fix the ‘SETUP MENU UAVTALK ACTIVE’ screen (21:38)
Thank you for watching, please LIKE and SUBSCRIBE.
Happy flying!
- published: 04 May 2015
- views: 44864
HobbyKing Mini OSD Setup Guide
- Order: Reorder
- Duration: 8:41
- Updated: 09 Jun 2014
- views: 25447
The HobbyKing Mini OSD is a simple and effective unit. I've found the instructions to be quite lacking and the GPS info updates quite slowly in flight, but it'...
The HobbyKing Mini OSD is a simple and effective unit. I've found the instructions to be quite lacking and the GPS info updates quite slowly in flight, but it's still a nice basic unit to have on board an aircraft.
In this guide video, I show you how to wire the components and go over some settings.
Learn more: http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=29798&aff;=1220394
---
SonicOrbStudios
Dave@SonicOrbStudios.com
http://instagram.com/sonicorbstudios
http://twitter.com/sonicorbstudios
https://plus.google.com/+SonicorbstudiosOfficial/posts
http://socialblade.com/youtube/user/sonicorbstudios
---
wn.com/Hobbyking Mini Osd Setup Guide
The HobbyKing Mini OSD is a simple and effective unit. I've found the instructions to be quite lacking and the GPS info updates quite slowly in flight, but it's still a nice basic unit to have on board an aircraft.
In this guide video, I show you how to wire the components and go over some settings.
Learn more: http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=29798&aff;=1220394
---
SonicOrbStudios
Dave@SonicOrbStudios.com
http://instagram.com/sonicorbstudios
http://twitter.com/sonicorbstudios
https://plus.google.com/+SonicorbstudiosOfficial/posts
http://socialblade.com/youtube/user/sonicorbstudios
---
- published: 09 Jun 2014
- views: 25447
Minim OSD. On screen heads up display for FPV. DIYDrones and HobbyKing. Review. RCHacker #14
- Order: Reorder
- Duration: 21:25
- Updated: 01 Jan 2013
- views: 69596
New model available here:
http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=36844&aff;=754418
Marc has a closer look at a clone of the Minim OS...
New model available here:
http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=36844&aff;=754418
Marc has a closer look at a clone of the Minim OSD v0.1, its problems, setup and how it compares to the genuine DIYDrones v1.1. Includes where to find all the info on the web.
wn.com/Minim Osd. On Screen Heads Up Display For Fpv. Diydrones And Hobbyking. Review. Rchacker 14
New model available here:
http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=36844&aff;=754418
Marc has a closer look at a clone of the Minim OSD v0.1, its problems, setup and how it compares to the genuine DIYDrones v1.1. Includes where to find all the info on the web.
- published: 01 Jan 2013
- views: 69596
$25 Mini OSD: Review
- Order: Reorder
- Duration: 5:38
- Updated: 29 Sep 2014
- views: 17538
You read the title right. I got this OSD unit with GPS for $25. Of course, I was slightly skeptical but I bought it anyway. I installed it to my DJI F450 qua...
You read the title right. I got this OSD unit with GPS for $25. Of course, I was slightly skeptical but I bought it anyway. I installed it to my DJI F450 quadcopter and gave it a try. Find out what you get for $25 and see if it's worth buying.
Gear:
Mini OSD: Hobbyking.com
GoPro Hero 3: http://goo.gl/g2xioK
Fatshark Teleporter V3: http://goo.gl/GcwXwi
DJI F450: http://goo.gl/bG9BPE
DX6i: http://goo.gl/c4Yj9L
600mW Immersion video TX: http://goo.gl/fTSnPt
wn.com/25 Mini Osd Review
You read the title right. I got this OSD unit with GPS for $25. Of course, I was slightly skeptical but I bought it anyway. I installed it to my DJI F450 quadcopter and gave it a try. Find out what you get for $25 and see if it's worth buying.
Gear:
Mini OSD: Hobbyking.com
GoPro Hero 3: http://goo.gl/g2xioK
Fatshark Teleporter V3: http://goo.gl/GcwXwi
DJI F450: http://goo.gl/bG9BPE
DX6i: http://goo.gl/c4Yj9L
600mW Immersion video TX: http://goo.gl/fTSnPt
- published: 29 Sep 2014
- views: 17538
MinimOSD Micro - Overview and Demonstration (KV Team mods)
- Order: Reorder
- Duration: 11:44
- Updated: 03 Apr 2015
- views: 50854
In this video we will take a quick look at the excellent new version of the MinimOSD board – the MinimOSD Micro. This is one of the latest versions of the board...
In this video we will take a quick look at the excellent new version of the MinimOSD board – the MinimOSD Micro. This is one of the latest versions of the board and not only includes the excellent KV Team mods but also is only 15mm square.
The KV Mods allow you to connect your flight battery, current sensor, RSSI inputs and others directly to the board without the need for resistor bridges or fussy soldering.
If you are interested in seeing more of this board (and its cousins) in actions connected to boards like the APM, Naze32 and Multiwii you can watch the MinimOSD series on my channel – https://www.youtube.com/playlist?list=PLYsWjANuAm4qfxLkr_RLlSF3qh_AwLYIT
Thanks for watching, please LIKE and SUBSCRIBE!
Happy flying!
wn.com/Minimosd Micro Overview And Demonstration (Kv Team Mods)
In this video we will take a quick look at the excellent new version of the MinimOSD board – the MinimOSD Micro. This is one of the latest versions of the board and not only includes the excellent KV Team mods but also is only 15mm square.
The KV Mods allow you to connect your flight battery, current sensor, RSSI inputs and others directly to the board without the need for resistor bridges or fussy soldering.
If you are interested in seeing more of this board (and its cousins) in actions connected to boards like the APM, Naze32 and Multiwii you can watch the MinimOSD series on my channel – https://www.youtube.com/playlist?list=PLYsWjANuAm4qfxLkr_RLlSF3qh_AwLYIT
Thanks for watching, please LIKE and SUBSCRIBE!
Happy flying!
- published: 03 Apr 2015
- views: 50854
OSD ZB2 Paarpruefung Muendlich
- Order: Reorder
- Duration: 18:32
- Updated: 10 Jul 2015
- views: 4020
- published: 10 Jul 2015
- views: 4020
翔大模型_APM MiNi OSD TEST
- Order: Reorder
- Duration: 5:00
- Updated: 01 Aug 2014
- views: 3036
富盛通訊 Remzibi osd +SJ4000 + 圖傳接線說明
- Order: Reorder
- Duration: 13:31
- Updated: 01 Sep 2014
- views: 10180
9/3重要更正:
晚上10點多總算跟生產廠商聯繫到，S1版的OSD已經不在支援刷機因為已經脫離電腦設定可以單獨在機板操作先前提到刷機是錯誤訊息，在此說聲抱歉及更正，感謝!
(露天拍賣)SJCAM CAMERAS SALE:http://class.ruten.com.tw/user/index00.php?s=s...
9/3重要更正:
晚上10點多總算跟生產廠商聯繫到，S1版的OSD已經不在支援刷機因為已經脫離電腦設定可以單獨在機板操作先前提到刷機是錯誤訊息，在此說聲抱歉及更正，感謝!
(露天拍賣)SJCAM CAMERAS SALE:http://class.ruten.com.tw/user/index00.php?s=shss
(FB專頁)SJCAMSj4000 aerial photography :http://www.facebook.com/shs00625/
Gmail: shs00625@gmail.com
wn.com/富盛通訊 Remzibi Osd Sj4000 圖傳接線說明
What in SAM HELL is OSD!? - Demunseed
- Order: Reorder
- Duration: 8:47
- Updated: 17 Nov 2014
- views: 3745
Up close look at ezOSD with detailed description and in-flight video.
Subscribe Now! (In January we're going to start adding names to the "Demunseed Prize Whee...
Up close look at ezOSD with detailed description and in-flight video.
Subscribe Now! (In January we're going to start adding names to the "Demunseed Prize Wheel!")
Please "LIKE" and leave a comment! (I respond to ALL comments or questions) - Jim
wn.com/What In Sam Hell Is Osd Demunseed
How to Setup KV OSD MinimOSD Naze32
- Order: Reorder
- Duration: 94:36
- Updated: 16 Feb 2014
- views: 96776
KVOSD alternative firmware based on the original MinimOSD project by Sandro Benigno.
https://code.google.com/p/arducam-osd/wiki/minimosd
== Chapter Index ==
0:...
KVOSD alternative firmware based on the original MinimOSD project by Sandro Benigno.
https://code.google.com/p/arducam-osd/wiki/minimosd
== Chapter Index ==
0:25 Commentary
11:44 Gearing up
15:51 MinimOSD Hardware Overview
19:12 KV Team board Overview
24:18 Working with Sensors and Signals - RC Filters/PWM
32:03 Voltage Dividers
37:52 Current Sensing
43:47 Tips on Fine Pitch Soldering
46:54 Sample Wiring Diagram
52:20 Quad Walkthrough
56:33 Setting up GPS
1:00:50 Flashing the Firmware
1:08:17 KV OSD GUI Overview
1:15:11 OSD Configuration via Transmitter Sticks
1:24:32 Working with RSSI Signals
1:27:07 Calibrating RSSI
1:32:40 Post commentary - be safe and enjoy your new fancy OSD :)
===
Everything you never wanted to know about MinimOSD and the KV Team OSD firmware :) Keep submitting those pro-tips!
== Links ===
Original MinimOSD project: https://code.google.com/p/arducam-osd/wiki/minimosd
KV OSD Naze32 wiring diagram: http://fpvlab.com/forums/showthread.php?24639-Cloneout-Mini-H-Quad&p;=441182&viewfull;=1#post441182
KV OSD Pinout: http://www.rcgroups.com/forums/showthread.php?t=2096416
wn.com/How To Setup Kv Osd Minimosd Naze32
KVOSD alternative firmware based on the original MinimOSD project by Sandro Benigno.
https://code.google.com/p/arducam-osd/wiki/minimosd
== Chapter Index ==
0:25 Commentary
11:44 Gearing up
15:51 MinimOSD Hardware Overview
19:12 KV Team board Overview
24:18 Working with Sensors and Signals - RC Filters/PWM
32:03 Voltage Dividers
37:52 Current Sensing
43:47 Tips on Fine Pitch Soldering
46:54 Sample Wiring Diagram
52:20 Quad Walkthrough
56:33 Setting up GPS
1:00:50 Flashing the Firmware
1:08:17 KV OSD GUI Overview
1:15:11 OSD Configuration via Transmitter Sticks
1:24:32 Working with RSSI Signals
1:27:07 Calibrating RSSI
1:32:40 Post commentary - be safe and enjoy your new fancy OSD :)
===
Everything you never wanted to know about MinimOSD and the KV Team OSD firmware :) Keep submitting those pro-tips!
== Links ===
Original MinimOSD project: https://code.google.com/p/arducam-osd/wiki/minimosd
KV OSD Naze32 wiring diagram: http://fpvlab.com/forums/showthread.php?24639-Cloneout-Mini-H-Quad&p;=441182&viewfull;=1#post441182
KV OSD Pinout: http://www.rcgroups.com/forums/showthread.php?t=2096416
- published: 16 Feb 2014
- views: 96776
Beginners FPV Guide -- Adding an OSD to FPV System
- Order: Reorder
- Duration: 5:59
- Updated: 05 Jan 2012
- views: 29382
Wonderful world of FPV (First Person View) flying is simply a fascinating hobby and the simplest and safest way to make your flying dream come true. But when it...
Wonderful world of FPV (First Person View) flying is simply a fascinating hobby and the simplest and safest way to make your flying dream come true. But when it comes to starting with this hobby, most of the Beginners are just left there with big questions only and totally pro level information that does nothing but confusing them. Keeping this in mind I put up a written version of Beginners FPV guide at my site, downloadable here http://onlyflyingmachines.com/FPVGuide.html and then as promised this video version, the Video Series of AliShanMao's beginners FPV Guide is now started. This is AliShanMao Beginners Guide to FPV Part 6. In this part you will watch how to add an OSD and GPS to your basic FPV system (Video tx and Camera) that we put together in previous video and install in on the FPV Plane. More parts of this video series will follow of course so subscribe to my channel now and do not miss them. Comments and feedback welcome at alishanmao@gmail.com , or info@onlyflyingmachines.com Don't forget to visit http://www.onlyflyingmachines.com and Subscribe to http://www.youtube.com/alishanmao
wn.com/Beginners Fpv Guide Adding An Osd To Fpv System
Wonderful world of FPV (First Person View) flying is simply a fascinating hobby and the simplest and safest way to make your flying dream come true. But when it comes to starting with this hobby, most of the Beginners are just left there with big questions only and totally pro level information that does nothing but confusing them. Keeping this in mind I put up a written version of Beginners FPV guide at my site, downloadable here http://onlyflyingmachines.com/FPVGuide.html and then as promised this video version, the Video Series of AliShanMao's beginners FPV Guide is now started. This is AliShanMao Beginners Guide to FPV Part 6. In this part you will watch how to add an OSD and GPS to your basic FPV system (Video tx and Camera) that we put together in previous video and install in on the FPV Plane. More parts of this video series will follow of course so subscribe to my channel now and do not miss them. Comments and feedback welcome at alishanmao@gmail.com , or info@onlyflyingmachines.com Don't forget to visit http://www.onlyflyingmachines.com and Subscribe to http://www.youtube.com/alishanmao
- published: 05 Jan 2012
- views: 29382
Cheapest FPV OSD with GPS Distance
- Order: Reorder
- Duration: 13:28
- Updated: 17 Feb 2014
- views: 26243
The G-OSD3 from HobbyKing is probably the cheapest OSD (On Screen Display) for FPV (First Person View) Flying which displays accurate LOS distance by GPS.
At 40...
The G-OSD3 from HobbyKing is probably the cheapest OSD (On Screen Display) for FPV (First Person View) Flying which displays accurate LOS distance by GPS.
At 40bucks, you get readings of batteries' voltages, altitude, distance ran and a graphical illustration showing where your base position is. The base is denoted by letter "B" which keeps moving around your aircraft which is an inverted "T" letter. This is a useful feature which allows you to navigate back home. Even on the ground, the accuracy of this feature is seen at more than 25m away from the starting position. When the base ("B") is at 6 o'clock, I turned my quadcopter 180 degrees and immediately the "B" moved to 12 o'clock, which is pretty impressive. My only complaint are the current reading is inactive (can't program it to work) and the GPS takes a long time to lock on (about 15 seconds longer than my Naza GPS).
wn.com/Cheapest Fpv Osd With Gps Distance
The G-OSD3 from HobbyKing is probably the cheapest OSD (On Screen Display) for FPV (First Person View) Flying which displays accurate LOS distance by GPS.
At 40bucks, you get readings of batteries' voltages, altitude, distance ran and a graphical illustration showing where your base position is. The base is denoted by letter "B" which keeps moving around your aircraft which is an inverted "T" letter. This is a useful feature which allows you to navigate back home. Even on the ground, the accuracy of this feature is seen at more than 25m away from the starting position. When the base ("B") is at 6 o'clock, I turned my quadcopter 180 degrees and immediately the "B" moved to 12 o'clock, which is pretty impressive. My only complaint are the current reading is inactive (can't program it to work) and the GPS takes a long time to lock on (about 15 seconds longer than my Naza GPS).
- published: 17 Feb 2014
- views: 26243
APM Mini 3.1 - Adding an OSD for FPV using MinimOSD - complete setup
- Order: Reorder
- Duration: 19:20
- Updated: 13 Mar 2015
- views: 12567
You can watch all of the APM setup videos here - https://www.youtube.com/playlist?list=PLYsWjANuAm4pCP3jjSAcmDJIEmyaEregs
In this video we add an OSD to an APM...
You can watch all of the APM setup videos here - https://www.youtube.com/playlist?list=PLYsWjANuAm4pCP3jjSAcmDJIEmyaEregs
In this video we add an OSD to an APM 3.1 (also works on 2.5 and 2.7) using the telemetry port on the flight controller itself. no changes are needed to the firmware of setup on the board to do this just the great little $12 board and some cables.
In this video I coevr what software you need, how you setup the board so it shows what you want, where you want it and how you cable it up to the APM and your camera and video transmitter.
In this video I cover:
- What you need
- Why you will need an FTDI adapter
- Downloading the software you need
- Flashing the firmware and setup
- Configuring the MinimOSD
- Wiring to the APM
- Best practice for the power system on the MinimOSD
- Wiring to the camera and video transmitter
- Wiring the entire system up
Thanks for watching please LIKE and SUBSCRIBE!
Happy flying!
wn.com/Apm Mini 3.1 Adding An Osd For Fpv Using Minimosd Complete Setup
You can watch all of the APM setup videos here - https://www.youtube.com/playlist?list=PLYsWjANuAm4pCP3jjSAcmDJIEmyaEregs
In this video we add an OSD to an APM 3.1 (also works on 2.5 and 2.7) using the telemetry port on the flight controller itself. no changes are needed to the firmware of setup on the board to do this just the great little $12 board and some cables.
In this video I coevr what software you need, how you setup the board so it shows what you want, where you want it and how you cable it up to the APM and your camera and video transmitter.
In this video I cover:
- What you need
- Why you will need an FTDI adapter
- Downloading the software you need
- Flashing the firmware and setup
- Configuring the MinimOSD
- Wiring to the APM
- Best practice for the power system on the MinimOSD
- Wiring to the camera and video transmitter
- Wiring the entire system up
Thanks for watching please LIKE and SUBSCRIBE!
Happy flying!
- published: 13 Mar 2015
- views: 12567
HobbyKing Mini OSD, G-OSD, Adding GPS Home Arrow Firmware
- Order: Reorder
- Duration: 10:56
- Updated: 12 Jul 2015
- views: 3970
HK $25 Mini OSD w/GPS. Upgrade firmware to get RTH Home Arrow.
(Used Windows 7, ExtremeBurner would not run on Win 8 for me.)
Product Page
http://www.hobbyki...
HK $25 Mini OSD w/GPS. Upgrade firmware to get RTH Home Arrow.
(Used Windows 7, ExtremeBurner would not run on Win 8 for me.)
Product Page
http://www.hobbyking.com/hobbyking/store/__29798__Mini_OSD_System_w_GPS_Module.html
Firmware for flashing
http://www.rcgroups.com/forums/showpost.php?p=21163569&postcount;=1349
Board PinOut
http://www.rcgroups.com/forums/showpost.php?p=19072579&postcount;=8
Extreme Burner Software
http://win.cutephp.com/extreme_burner_avr_674689
wn.com/Hobbyking Mini Osd, G Osd, Adding Gps Home Arrow Firmware
HK $25 Mini OSD w/GPS. Upgrade firmware to get RTH Home Arrow.
(Used Windows 7, ExtremeBurner would not run on Win 8 for me.)
Product Page
http://www.hobbyking.com/hobbyking/store/__29798__Mini_OSD_System_w_GPS_Module.html
Firmware for flashing
http://www.rcgroups.com/forums/showpost.php?p=21163569&postcount;=1349
Board PinOut
http://www.rcgroups.com/forums/showpost.php?p=19072579&postcount;=8
Extreme Burner Software
http://win.cutephp.com/extreme_burner_avr_674689
- published: 12 Jul 2015
- views: 3970
Hobbyking G-OSD 3 Mini OSD System
- Order: Reorder
- Duration: 3:07
- Updated: 19 Jul 2014
- views: 10555
testing my new gadget on the F550 Hexacopter. Another great purchase from Hobbyking! I love seeing all the cool info on my monitor. Very happy :)
Click here fo...
testing my new gadget on the F550 Hexacopter. Another great purchase from Hobbyking! I love seeing all the cool info on my monitor. Very happy :)
Click here for HD footage from gopro: http://youtu.be/A8k_mocE2iY
Parts list: http://bitly.com/bundles/o_7gj8asgonj/3
wn.com/Hobbyking G Osd 3 Mini Osd System
testing my new gadget on the F550 Hexacopter. Another great purchase from Hobbyking! I love seeing all the cool info on my monitor. Very happy :)
Click here for HD footage from gopro: http://youtu.be/A8k_mocE2iY
Parts list: http://bitly.com/bundles/o_7gj8asgonj/3
- published: 19 Jul 2014
- views: 10555
close fullscreen
- Playlist
- Chat
close fullscreen
- Playlist
- Chat
25:43
(3/8) Naze32 Flight Controller - Adding an OSD using MinimOSD
To watch all the videos in this series visit https://www.youtube.com/playlist?list=PLYsWjA...
published: 16 Feb 2015
(3/8) Naze32 Flight Controller - Adding an OSD using MinimOSD
(3/8) Naze32 Flight Controller - Adding an OSD using MinimOSD
- Report rights infringement
- published: 16 Feb 2015
- views: 67360
14:56
FPV Series Episode 6: Simple OSD Wiring
In This Episode, We discuss the Simple Wireing Setup for OSD, Some osds may require Solder...
published: 16 Sep 2014
FPV Series Episode 6: Simple OSD Wiring
FPV Series Episode 6: Simple OSD Wiring
- Report rights infringement
- published: 16 Sep 2014
- views: 22837
4:42
My OCD (Song)
A song about making things right. iTUNES: http://bit.ly/MyOCDsong
NOTE: We understand th...
published: 17 Jun 2014
My OCD (Song)
My OCD (Song)
- Report rights infringement
- published: 17 Jun 2014
- views: 22508669
5:27
A cheap GPS OSD (part 1)
I spied this cheap GPS-based OSD on HobbyKing and thought I'd buy one to review.
http://w...
published: 25 Apr 2013
A cheap GPS OSD (part 1)
A cheap GPS OSD (part 1)
- Report rights infringement
- published: 25 Apr 2013
- views: 52778
17:45
APM 2.5/2.6/2.7 - Adding an OSD for FPV using MinimOSD - complete setup
You can watch all of the APM setup videos here - https://www.youtube.com/watch?v=30cCs4aHd...
published: 13 Mar 2015
APM 2.5/2.6/2.7 - Adding an OSD for FPV using MinimOSD - complete setup
APM 2.5/2.6/2.7 - Adding an OSD for FPV using MinimOSD - complete setup
- Report rights infringement
- published: 13 Mar 2015
- views: 33816
25:39
(7/9) Seriously Pro F3 (SP3) Series - Adding an OSD for FPV using a MinimOSD
To see all of the videos in the playlist visit https://www.youtube.com/playlist?list=PLYsW...
published: 15 Oct 2015
(7/9) Seriously Pro F3 (SP3) Series - Adding an OSD for FPV using a MinimOSD
(7/9) Seriously Pro F3 (SP3) Series - Adding an OSD for FPV using a MinimOSD
- Report rights infringement
- published: 15 Oct 2015
- views: 6591
3:47
Vector FPV Controller with Full Color OSD on a Funjet
Eagle Tree's Vector controller on a Funjet!
published: 09 Nov 2013
Vector FPV Controller with Full Color OSD on a Funjet
Vector FPV Controller with Full Color OSD on a Funjet
- Report rights infringement
- published: 09 Nov 2013
- views: 35731
14:39
Cyclops Storm OSD flight review
This is my review of the Storm OSD.
It has both pros and cons as you will see throughout t...
published: 24 Sep 2012
Cyclops Storm OSD flight review
Cyclops Storm OSD flight review
- Report rights infringement
- published: 24 Sep 2012
- views: 25379
22:43
(4/10) CC3D Flight Controller - Adding an OSD using MinimOSD
To see all of the videos in this series visit https://www.youtube.com/playlist?list=PLYsWj...
published: 04 May 2015
(4/10) CC3D Flight Controller - Adding an OSD using MinimOSD
(4/10) CC3D Flight Controller - Adding an OSD using MinimOSD
- Report rights infringement
- published: 04 May 2015
- views: 44864
8:41
HobbyKing Mini OSD Setup Guide
The HobbyKing Mini OSD is a simple and effective unit. I've found the instructions to be ...
published: 09 Jun 2014
HobbyKing Mini OSD Setup Guide
HobbyKing Mini OSD Setup Guide
- Report rights infringement
- published: 09 Jun 2014
- views: 25447
21:25
Minim OSD. On screen heads up display for FPV. DIYDrones and HobbyKing. Review. RCHacker #14
New model available here:
http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idprodu...
published: 01 Jan 2013
Minim OSD. On screen heads up display for FPV. DIYDrones and HobbyKing. Review. RCHacker #14
Minim OSD. On screen heads up display for FPV. DIYDrones and HobbyKing. Review. RCHacker #14
- Report rights infringement
- published: 01 Jan 2013
- views: 69596
5:38
$25 Mini OSD: Review
You read the title right. I got this OSD unit with GPS for $25. Of course, I was slightl...
published: 29 Sep 2014
$25 Mini OSD: Review
$25 Mini OSD: Review
- Report rights infringement
- published: 29 Sep 2014
- views: 17538
11:44
MinimOSD Micro - Overview and Demonstration (KV Team mods)
In this video we will take a quick look at the excellent new version of the MinimOSD board...
published: 03 Apr 2015
MinimOSD Micro - Overview and Demonstration (KV Team mods)
MinimOSD Micro - Overview and Demonstration (KV Team mods)
- Report rights infringement
- published: 03 Apr 2015
- views: 50854
18:32
OSD ZB2 Paarpruefung Muendlich
published: 10 Jul 2015
OSD ZB2 Paarpruefung Muendlich
OSD ZB2 Paarpruefung Muendlich
- Report rights infringement
- published: 10 Jul 2015
- views: 4020
(3/8) Naze32 Flight Controller - Adding an OSD usi...
FPV Series Episode 6: Simple OSD Wiring...
My OCD (Song)...
A cheap GPS OSD (part 1)...
APM 2.5/2.6/2.7 - Adding an OSD for FPV using Mini...
(7/9) Seriously Pro F3 (SP3) Series - Adding an OS...
Vector FPV Controller with Full Color OSD on a Fun...
Cyclops Storm OSD flight review...
(4/10) CC3D Flight Controller - Adding an OSD usin...
HobbyKing Mini OSD Setup Guide...
Minim OSD. On screen heads up display for FPV. DIY...
$25 Mini OSD: Review...
MinimOSD Micro - Overview and Demonstration (KV Te...
OSD ZB2 Paarpruefung Muendlich...
翔大模型_APM MiNi OSD TEST...
富盛通訊 Remzibi osd +SJ4000 + 圖傳接線說明...
What in SAM HELL is OSD!? - Demunseed...
How to Setup KV OSD MinimOSD Naze32...
Beginners FPV Guide -- Adding an OSD to FPV System...
Cheapest FPV OSD with GPS Distance...
APM Mini 3.1 - Adding an OSD for FPV using MinimOS...
HobbyKing Mini OSD, G-OSD, Adding GPS Home Arrow F...
Hobbyking G-OSD 3 Mini OSD System...
-
Lyrics list:text lyricsplay full screenplay karaoke
photo: Via YouTube
Google's April Fools' joke went so wrong that it might have cost someone their job
Edit TechRadar 01 Apr 2016
We try to avoid as much of April Fools' day as possible on techradar. In fact, as a rule, we'd advise sleeping in until midday, that way you'll avoid all the terrible "jokes" entirely. We can imagine there are a few people at Google who would like to go to bed and start the day again though after its latest feature went south very quickly ... Not so funny ... Meanwhile, Abdus Salam wrote ... ....
photo: AP / Owen Sweeney
WN.com Week In Review For March 27-April 2, 2016
Edit WorldNews.com 01 Apr 2016
The end of the week comes with the start of a new month and a look back at the Top 5 most viewed stories on WN.com.Maybe you saw these stories when they first appeared on our pages – maybe you didn’t. Either way, let’s take a look back at the past week.. + A report claims Indian priest Thomas Uzhunnalil was crucified by ISIS on Good Friday ... The animal was discovered by a biker ... – WN.com. ....
photo: AP / Paul Vernon
Inequality Even Before Birth And After Death: How The Koch Empire Impacted Me
Edit WorldNews.com 01 Apr 2016
Article by WN.com correspondent Dallas Darling After all of these years I have had to come to a dystopian realization that even before my birth and long after my death, the powerful and domineering Koch Empire has – and will continue – to impact me.Indeed, my grandfather was killed while working for Koch Industries ... Nor did my grandmother like to discuss his death ... Consequently, he fell 30 feet from a Koch Industries oil platform....
photo: AP / Ahn Young-joon
South Korea says North fired missile, as US hosts nuclear summit
Edit The Times of India 01 Apr 2016
WASHINGTON ... Barack Obama confers with PM Narendra Modi during a working dinner with World leaders in White House on March 31 ... ....
photo: WN / Aruna Mirasdar
Porn and the Threat to Virility
Edit Time Magazine 31 Mar 2016
Noah Church is a 26-year-old part-time wildland firefighter in Portland, Ore. When he was 9, he found naked pictures on the Internet. He learned how to download explicit videos. When he was 15, streaming videos arrived, and he watched those. Often. Several times a day, doing that which people often do while watching that genre by themselves ... After the appeal of those waned, he moved on to the next level, more intense, often more violent ... ....
« back to news headlines
UPDATE -- Military Commissions Media Invitation CANCELLED for Formerly Scheduled Proceedings in United States v. Khalid Shaikh Mohammad et. al. (US Department of Defense)
Edit Public Technologies 02 Apr 2016
(Source. US Department of Defense) *****CANCELLED*****. The 9/11 KSM Military Commission's hearing previously scheduled for April 4-15 is cancelled ... ---------------------------------------------- ... al., April 4-15 ... osd.pentagon.pa.mbx.gtmo-press@mail.mil ... Request for reporting on Guantanamo topics not related to the military commission (courtroom) must be coordinated through OSD Public Affairs and Joint Task Force-Guantanamo public affairs....
Enforcement Directorate attaches properties of key Vyapam scam accused
Edit The Times of India 02 Apr 2016
Indore. Enforcement Directorate (ED) on Friday attached properties of two key Vyapam accused Dr Vinod Bhandari, chairman of Sri Aurobindo Institute of Medical Science (SAIMS) and Dr Jagdish Sagar ... STF charge-sheeted Dr Bhandari along with 31 people, including O P Shukla, former OSD to sacked BJP leader Laxmikant Sharma, in connection with 2012 pre-medical test (PMT) scam ... ....
Germany’s KfW to give 500 million Euro loan to Nagpur Metro (Ministry of Urban Development of the Republic of India)
Edit Public Technologies 01 Apr 2016
(Source ... An agreement in this regard was signed today in New Delhi by the Department of Economic Affairs and KfW ... German Ambassador Dr.Martin Ney, OSD (Urban Transport) in the Ministry of Urban Development Shri Mukund Sinha, Managing Director of Nagpur Metro Shri Brijesh Dixit and others were present on the occasion of signing of agreement ... AAR ... Original Document ... (noodl. 32863135) ....
HC waits for CBI report, adjourns industrial plot scam case sine die
Edit Indian Express 31 Mar 2016HNBGU and SGRR PG college in Dehradun accorded with NAAC A grading
Edit The Times of India 31 Mar 2016
DEHRADUN ... The varsity now has very bright prospects for increased funding from UGC, MHRD besides increased placement prospects for students ... Students will also get better chances to study abroad in their post-grads in good universities as the grading has added more credibility to the already popular only central university from our state" said Devendra Negi, Officer on Special Duty (OSD) to HNBGU vice-chancellor ... ....
WKU to celebrate Fulbright Week April 4-8 (Western Kentucky University)
Edit Public Technologies 31 Mar 2016
(Source. Western Kentucky University). WKU will celebrate Fulbright Week April 4-8 with events for prospective students and faculty applicants as well as the wider campus community. The Fulbright Program is the U.S ... The U.S. Student Program, the U.S. Scholar Program and the Foreign Language Teaching Assistant Program ... The Fulbright U.S ... OSD welcomes the opportunity to work with students interested in national or international scholarships....
Release bonus, grant quota for HUDA plots, demand protesting workers
Edit Indian Express 30 Mar 2016412th Medical Group opens doors to new enrollees (Edwards Air Force Base)
Edit Public Technologies 30 Mar 2016
(Source. Edwards Air Force Base) 412th Medical Group opens doors to new enrollees ... We invite TRICARE Prime beneficiaries not currently enrolled with the 412th Medical Group to call United Healthcare at 1-877-988-9378, or visit the TRICARE Beneficiary Web Enrollment site at https.//www.dmdc.osd.mil/appj/bwe/indexaction.do to set up the Primary Care Manager change ... (noodl....
'ASI sites' new ticket rates to come into effect from Apr 1'
Edit The Times of India 29 Mar 2016
ASI has about 120 ticketed monuments under its jurisdiction out of which 32 are World Heritage Sites ... Navneet Soni, Officer on Special Duty (OSD) to the minister, said, "The new rates will be implemented form April 1 but a final call is yet to be taken on the quantum of the increase by the minister." ... MP KND SK KND ....
PUBLICATION OF FISCAL YEARS 2016 THROUGH 2036 TABLES OF ORGANIZATION AND EQUIPMENT (US Marines Corps)
Edit Public Technologies 29 Mar 2016
(Source ... Date Signed. 3/29/2016. MARADMINS Active Number. 179/16. R 291803Z MAR 16 ... R ... 2 ... Included in this ASR are several Headquarters Marine Corps and Office of the Secretary of Defense (OSD) directed actions including ... This OSD initiative was implemented through Engineer Change Proposal (ECP) 6478 in Dec 2015. The ECP enhancement supports compliance with OSD mandates and DODM 8260.03 'Global Force Management Data Initiative Implementation....
Guv meets babus, tells them to focus on Char Dham yatra
Edit The Times of India 28 Mar 2016
DEHRADUN ... Sharp at 10 am, the governor's cavalcade entered the secretariat and amid tight security, he left for the fourth floor and held a two hour-long meeting with senior bureaucrats ... Meanwhile, the fourth floor at the secretariat which is otherwise bustling with activity, looked deserted, with the CM and his OSD's room being cleaned by sanitation staff and files being rearranged. ....
Differences within
Edit Indian Express 27 Mar 2016
In Madhya Pradesh, Jitu Patwari, a disciple of Digvijaya Singh, moved a resolution demanding a censure motion against Asaduddin Owaisi. The central leadership of the Congress wants to present a secular image, but some of its state units have shown a different side ... Share This Article. Related Article. Controversy over 'Bharat mata ki jai' meaningless. L K Advani Slogan row ... His OSD, Suresh Yadav, is tipped to be sent to the World Bank ... ....
- 1
- 2
- 3
- 4
- 5
- Next page »
