'Burner' is featured as a movie character in the following productions:
The Leftovers (2013)
Actors:
Justin Theroux (actor),
Liv Tyler (actress),
Christopher Eccleston (actor),
Brad Leland (actor),
Ann Dowd (actress),
Marceline Hugot (actress),
Jason A. McCauley (miscellaneous crew),
Amy Brenneman (actress),
Damon Lindelof (producer),
Damon Lindelof (writer),
Michael Gaston (actor),
Chris Nuñez (actor),
Demian Resnick (miscellaneous crew),
Ron Yerxa (producer),
Albert Berger (producer),
Genres:
Drama,
Fantasy,
Rhymes for Young Ghouls (2013)
Actors:
Arthur Holden (actor),
Mark Antony Krupa (actor),
Marianne Girard (miscellaneous crew),
Kent McQuaid (actor),
Glen Gould (actor),
Jeff Barnaby (writer),
Jeff Barnaby (editor),
Jeff Barnaby (director),
Jeff Barnaby (composer),
John Christou (producer),
Katie Nolan (actress),
Brandon Oakes (actor),
Aisling Chin-Yee (producer),
Joe Barrucco (composer),
Roseanne Supernault (actress),
Genres:
Drama,
Taglines: On the Red Crow Rez, growing up means getting even.
Satellite of Love (2012)
Actors:
Patrick Bauchau (actor),
Michael Saleman (miscellaneous crew),
Janina Gavankar (actress),
Turk Pipkin (actor),
Chad Mathews (actor),
Nathan Phillips (actor),
Shannon Lucio (actress),
Will James Moore (producer),
Will James Moore (editor),
Will James Moore (director),
Will James Moore (writer),
Mike Lutz (actor),
Mike Lutz (producer),
Jill Rytie Lutz (producer),
Zachary Knighton (actor),
Plot: Catherine and Blake just tied the knot. Samuel and Catherine have a long and intimate history which is significant to the fact that Samuel and Blake are best friends. When Samuel decides not to attend their wedding under some pretense that no one believes, he invites the newlyweds to Nadi Vineyards for a week-long party in paradise to make up for his absence. Records spin, wine flows, and bottles pile up. What unfolds over the course of this week will rearrange the geometry of Samuel, Catherine, and Blake's relationships and test the boundaries of their complicated, revolving love for one another.
Genres:
Drama,
Romance,
Taglines: Love is in the Air.
Bus Stop to Black Rock (2011)
Actors:
Elena Altman (producer),
Tiffany Newcomer (actor),
Tiffany Newcomer (writer),
Tiffany Newcomer (miscellaneous crew),
Jason Peiser (editor),
Jason Peiser (writer),
Jason Peiser (director),
Jason Peiser (producer),
Leslie Fay Richards (actor),
Valerie Lee (actress),
Simon Lam (actor),
Novy Kamboj (actor),
Alan Winkler (miscellaneous crew),
Jason Wilson (composer),
Stephanie Talbeia (actor),
Genres:
Comedy,
Fantasy,
Music,
Short,
The Fear of God (2011)
Actors:
Michael Fredianelli (editor),
Michael Fredianelli (producer),
Michael Fredianelli (actor),
Michael Fredianelli (director),
Michael Fredianelli (writer),
Aaron Stielstra (composer),
Aaron Stielstra (actor),
Michael Nosé (producer),
Michael Nosé (actor),
Veronica Valencia (actress),
James Soderborg (actor),
Brian Marquez (actor),
Ryan Keenan (actor),
Todd Jurgess (writer),
Kat Reichmuth (actress),
Plot: Kenny Kitagawa is a struggling Christian moonlighting as a delivery boy. When he inadvertently delivers a pizza to a dead body, he becomes the pawn of a religious killer in a sick game of cat and mouse. Backed into a corner with no way to contact the police, Kenny must confront his own demons and go against his beliefs to find the murderer and clear his name before it's too late.
Keywords: car-chase, christianity, church, hooded-villain, japanese-american, knife, pick-axe, pizza-delivery, religion
Genres:
Thriller,
Rabbit (2011)
Actors:
Jasper Warry (producer),
Jasper Warry (writer),
Jasper Warry (director),
Jasper Warry (editor),
Andrew Watson (actor),
Daniel Tomlinson (actor),
Plot: Rabbit is an offbeat comedy about Beresford (Berry) Cripps, an enigmatic character who is struggling to find a new path in life after being put on permanent gardening leave by his city law firm after attempting to kill his boss. Set in the beautiful Brecon Beacons, Wales, this film deals with the themes of friendship, destiny, but also the nature of luck, investigating the idea that good luck may occur, and yet the recipient might remain completely oblivious due to their personal flaws.
Genres:
Comedy,
Drama,
Short,
A Marine Story (2010)
Actors:
Suzanne C. Swindle (miscellaneous crew),
Sean Hayes (actor),
David Avallone (actor),
Ned Farr (director),
Ned Farr (editor),
Ned Farr (writer),
Jessica M. Bair (actress),
Ned Farr (producer),
Dreya Weber (producer),
Dreya Weber (actress),
Craig Richey (composer),
Amanda Deibert (actress),
Kathe Mazur (actress),
Kathe Mazur (actress),
Gregg Daniel (actor),
Plot: Marine officer Alexandra is tough enough to kick any guy's ass in a bar fight, but there's one opponent she can't beat: military policy. When she returns to her conservative hometown from Iraq with a mysterious personal life, she finds herself charged with preparing a tempestuous teenage girl to boot camp.
Keywords: american-soldier, arm-wrestling, bar, boot-camp, california, closeted-homosexual, crystal-meth, don't-ask-don't-tell, drugs, female-soldier
Genres:
Drama,
Taglines: Every fight is personal
Quotes:
Saffron: They're all just boys, you know. None of them know what they are doing, and none of them want to take the time to figure it out. I just want a little squeeze here, a little massage there, a little exploration. Not all that jackhammering.
Alexandra Everett: Marines don't cry, their eyeballs sweat.
Alexandra Everett: Well, as my mom used to say, "Failure ain't the falling down... it's the staying down."
Firebird 2015 AD (1981)
Actors:
George Touliatos (actor),
Robert Wisden (actor),
Alex Diakun (actor),
Fred Keating (actor),
Doug McClure (actor),
Darren McGavin (actor),
Lawrence Shragge (composer),
Barbara Williams (actress),
Wendy Partridge (costume designer),
Biff McGuire (writer),
Barry Pearson (writer),
Paul Hoffert (composer),
Frank Pellegrino (actor),
Lee Broker (actor),
Maurice Hurley (writer),
Plot: In one of many unpopular and unsupported policy decisions, the US government of the near future outlaws vehicle petrol in an effort to curb the overuse of limited natural resources - except, of course, for official purposes. There are many renegades who oppose the authorities, and will stop at nothing to allow themselves the freedom of burning around the countryside.
Keywords: 2010s, automobile, firebird, future, gasoline, independent-film, number-in-title, outlaw, renegade
Genres:
Action,
Romance,
Sci-Fi,
Taglines: A boy... A girl... A car. Only the car is forbidden.
Quotes:
McVain: Give me the ID, I gotta fill out my report.::Dolan: Play me for it.::McVain: We're not kids anymore, Dole.::Dolan: Come on Jase, take your best shot.::McVain: Will you just give it to me!::Dolan: ...play for it!::McVain: No games! I said, NO GAMES!::Dolan: Plaaaay...::[McVain slaps Dolan's right hand, and Dolan reveals the ID and hands it to McVain]::McVain: Thanks, kid.::Dolan: That's okay, but I get to keep the horse!::[holds up the hood ornament he took from the car]::McVain: Whoopee.::[Dolan leaves]::Shana: Why do you give in to him, Jase? He's insane.::McVain: Because he's insane.::[laughs hysterically]
[first lines]::Announcer on Radio: Meanwhile, in a speech to Congress today, the President deplored the actions of the ten states which have voted to allot oil and gasoline supplies to citizens in defiance of federal orders. He declared that any return to the use of petroleum supplies for, in his words, "privileged personal purposes" would constitute a threat to national security. Meanwhile, in Des Moines, Iowa, terrorists carried out their second strike of the week at a U.S. Army fuel depot; this time escaping with ten thousand gallons of gasoline, estimated to be worth five million dollars on the black market.
Cam: You're wasting limited resources.::Red: Limited resources! If I had to, I could make fuel out of bullshit! And there is no scarcity of *that* in this world.
[last lines]::Shana: Do you have a bathroom?::Red: Yeah.::Shana: Do you have a shower?::Red: Oh yeah!::Shana: Hot water?::Red: Uh-huh. Yeah, I've also got a sauna.::Shana: You do?::Red: And a hot tub. And, uh, as a matter of fact, you know, I should really show you how to use it because it's very dangerous for somebody to be in there all by themselves.::Shana: Oh, why is that?::Red: Well, because sometimes...
Mohr und die Raben von London (1968)
Actors:
Hannes Stelzer (actor),
Frank Michelis (actor),
Walter Lendrich (actor),
Alfred Müller (actor),
Wolfgang Greese (actor),
Peter Reusse (actor),
Gerhard Rachold (actor),
Hans Hardt-Hardtloff (actor),
Hannjo Hasse (actor),
Ezard Haußmann (actor),
Rolf Hoppe (actor),
Christoph Engel (actor),
Hans Klering (actor),
Friedrich Teitge (actor),
Helmut Straßburger (actor),
Genres:
,
-
Berner ft Nipsey Hussle - Wax Room (Official Music Video)
#drugstorecowboy available now
http://www.livemixtapes.com/mixtapes/22853/berner-drugstore-cowboy
.html
dir by : david camarena
prod by : nima fadavi
-
50 Cent - Burner On Me
New track off of
The Kanan Tape - available for free download:
http://thekanantape.com
Prod by
Colt 45
Connect:
http://instagram.com/
50cent
http://facebook.com/50cent
http://twitter.com/50cent
-
Future x Young Thug Type Beat - "Burner"
Pick up a lease at my beat store here:
http://JacobLethalBeats.com/
---------------------------------------------
E-mail // JacobLethal@gmail.com
Soundcloud // soundcloud.com/JacobLethalBeats
Twitter // @JacobLethal
---------------------------------------------
Future Type Type
Beat
Future Type Type Beat 2016
Young Thug Type Beat
Young Thug Type Beat 2016
-
SAFAREE - BURNER (Official Video)
Music video by Safaree performing
Burner.
-
Safaree - "Burner" OFFICIAL VERSION
Download on iTunes:
http://bit.ly/BurnerSingle
-
Cheap low consumption homemade burner
This is the new burner i made,it works perfect,this test show how it burns with chainsaw leftovers,i am using two fan`s,one is for burner and other is to prevent to smoke goes back thru pipe and that fan also helps to push sawdust or wood chip to burner,it is low consumption burner and cheap to make,you can put it to any stove just have to make a frame,so for any question send me mail and i will answer you,in next video you will see how burner works on my water heater
-
waste oil burner for scrapping construction and first fire up
LOTS OF OTHER BURNER VIDS ON MY CHANNEL!!
DIY Waste Oil Burner for high power heating and
Melting for scrapping.
Build demonstration and first firing up to show running.** Before bitching about a bit of smoke on this first
TEST run, PLEASE look at the other vids on my channel of this burner
Running perfectly
CLEAN before making stupid environmental green washed comments. **
UPDATE: https://www.youtube.com/watch?v=0F69S8sKJIM&feature;=youtube_gdata
Waste oil burner designed for melting scrap aluminium and maybe copper as well as foundary use. The burner will run on any waste oil including used engine oil, waste vegetable oil, transmission fluid or even liquid lard. The oil burner was built from an old fire extinguisher bottle and some car exhaust pieces. The only measurements taken wer
...
-
How to build a Waste oil Burner for heating, scrapping or aluminium melting
Building a simple
Waste oil
Burner to run on used Vegetable
WVO or motor oil.
Please like, share and see the other vids on my channel.
This video shows step by step how easy it is to construct a waste oil burner capable of
Burning any flammable liquid. For the safety zealots and assorted whingers, this is a vid on how to build a waste oil burner, not how to weld or use the tools. Please only comment on this if you have a vid of your own to demonstrate how you do things different.
The burner is made from an old fire extinguisher bottle
and some old exhaust pipe. The waste oil inlet was a bit of metal fuel line I hacked out of a scrap car body. The burner as shown is simply 2 holes cut in the bottle and the 2 pieces of exhaust cut and welded in. a
hole is drilled in the inlet pipe and t
...
-
Block burner the movie
duval county lived written and starring block burner aka 1stpilot
-
How to make a spirit turbo burner up to +1500 °С
In today's video I'm going to show you the idea of making a simple and easy spirit turbo burner up to +1500o C with your own hands at home.
It's quite easy and simple to make a spirit turbo burner up to +1500o C with your own hands. And the biggest advantage is that hand made burner won't take much time and money! Easy-to-manufacture hand made liquid-fuel turbo burner will be useful both for tourists and summer residents
. In the burner spirit is not burning, the spirit vapor is burning here. The vapor will appear itself as a result of heating of the burner from the candle heat.
Watch this video and make a turbo burner by yourself almost for free!
Welcome to my channel
Roman UrsuHack where you will learn how to make hand made crafts,
New Year crafts, presents, toys,
Halloween scares.
The ...
-
Berner ft Young Thug, YG x Vital - All In A Day (Music Video)
Buy all in a day on iTunes
http://smarturl.it/allinaday
Produced by
Maxwell Smart and Cozmo
"
All In A Day" will be featured on
Berner's upcoming "20
Lights" EP coming soon.
Follow:
http://www.twitter.com/berner415
http://instagram.com/berner415
http://www.facebook.com/berner415
-
Mic Burner - Thought of You [Official Music Video][Prod.Magician] Transblasts Entertainment
Mic
Burner -
Thought of You [
Official Music Video] [
Prod.
Magician]
https://itunes.apple.com/
album/thought-of-you-single/id1042660991
Transblasts
Entertainment presents "Thought Of You" by Zambian artist "Mic Burner".
Epic scenery from
South Africa and
Namibia.
Enjoy!
℗
2015 Transblasts Entertainment
-
Homemade Propane Foundry Burner
Just a propane burner that I use in my home foundry, it works great for melting aluminum and other metals that melt at around 1200°F (660°C).
Thanks for watching and leave me a comment with your feedback, I will be happy to read it.
Parts list:
*all parts are either brass pipe fittings or black iron pipe fittings*
*
DO NOT USE GALVANIZED STEEL AS IT WILL RELEASE TOXIC FUMES WHEN HEATED*
1"-3/4" bell reducer
3/4"-8" pipe nipple
1"-5" pipe nipple
X2 1/8"-4" brass pipe nipple
1/8" coupler
1/8" 90° elbow
1/8" end cap
Instruction guide:
http://www.instructables.com/id/how-to-build-a-gas-forge-burner/?ALLSTEPS
A10 graphite crucible:
http://www.ebay.com/itm/like/221851228503?ul_noapp=true&chn;=ps&lpid;=82
Inspiration for foundry design:
https://www.youtube.com/watch?v=UXeCYmAQg6U
Kast O
Lite...
-
California: 'Burner Phones' May Require Verifiable ID If New Bill Passes
www.undergroundworldnews.com
Save On
Official DAHBOO7
Gear with
Code "5off"
http://dahboo7.deco-street.com/
Burner phones, beloved by criminals and TV writers everywhere, could be a thing of the past if a new bill by
California lawmakers passes.
The proposed law would require prepaid phone customers to register their personal details before purchasing a burner phone or
SIM card.
The
Closing of Prepaid
Mobile Device Security Gap bill, introduced by
Jonestown massacre survivor
State Rep
Jackie Speier, could make it harder for those hoping to communicate anonymously.
Retailers would be required to verify those details at purchase and keep a record of the details gathered.
Learn More:
https://www.rt.com/usa/337321-burner-phones-california-bill/#.VvcaQlBRci0.twitter
-
Why You Need a Burner Phone
Brian and
Jason talk about the ins and outs of burner phones.
Don’t get burned by using these hot tips that’ll heat up your already fire communication game. 🔥
This episode was made with the help of:
Brian Brushwood - host --
http://twitter.com/shwood
Jason Murphy - host / research -- http://twitter.com/captainmurphy
Brandt Hughes - camera
operator / editor -- http://twitter.com/gatowag
Bryce
Castillo - camera operator -- http://twitter.com/brycas
-
【SEGA爆音ジャズ】After Burner【東京アクティブNEETs】
伝説のアーケードゲーム、アフターバーナーのテーマを爆音ジャズアレンジして演奏してみました!!去年SEGAのコンポーザーであるHiro師匠の入社30周年アルバムに収録された曲なのですが、この度maimaiへの収録も決定しました!ぜひ遊んでみてくださいね!
Web
Site :
http://neets.tokyo
Twitter : https://twitter.com/active_neets
Facebook : https://www.facebook.com/activeneets/
*********
セガ音楽ゲームmaimaiに収録決定!
2/18より全国のゲームセンターで条件付き解禁開始!
※maimai PiNKの条件付き解禁仕様「チャレンジトラック」の対象曲です。
※3/17より誰でも遊べるようになります。
maimai PiNK公式サイト
遊べるお店や最新情報はこちらへ!
http://maimai.sega.jp/
この音源は下記CDにも収録されてます!
Hiro 30th Anniversary Album Thank you for listening!
http://ebten.jp/sega/p/4571164388694/
*********
-
Burner - Five Pills (And a Bottle of Whiskey)
Check out
http://www.sludgeswamp.blogspot.com/ for the best
Stoner Rock collection on the net trust me you guys wont be dissapointed by this site very well run
...what are you waiting for check it out
-
Burner Phone from Chinatown
Burner Phone from
Chinatown /
Cheap $
100 Tech Haul from Chinatown / Chinatown
Shopping Adventure 2016 / Cheap Chinatown Tech
Part 1 - https://youtu.be/m89hlwYHaVA
Subscribe:
http://bit.ly/1vyhAM9
BUY A SHIRT: http://bit.ly/1Ns2I9Q
FOLLOW ME!
Facebook: http://facebook.com/techsmarttyt
Snapchat: http://snapchat.com/add/techsmartt
Instagram: http://instagram.com/keaton
Twitter: http://twitter.com/keaton
-
Oil Burner maintenance - setting electrodes and replacing nozzle
This video shows you how to adjust the electodes in an oil burner and how to replace an oil nozzle.
-
♠ Motörhead ♠ Burner VIDEO
The Classic "
Burner" (feat.
Wurzel) by MOTÖRHEAD
http://www.amazon.de/s/ref=nb_sb_ss_c_0_13/280-2109091-9117250?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&url;=search-alias%3Dpopular&field-keywords;=mot%C3%B6rhead%20bastards&sprefix;=Mot%C3%B6rhead+Bas%2Caps%2C299
-
Amazing Cheapy Lighter Laser Burner!
Hack a cheap butane lighter and make the world's first "flick-style" burning laser lighter! Detailed instructions to build one on
http://www.kipkay.com
LASERDIY is no longer in business.
Get
Early Access to my videos for
30 days FREE by checking out
Vessel: http://vessel.com/kipkay
Get the parts to build your own: http://kipkay.com/parts/
Subscribe to
Kipkay: http://bit.ly/SubscribetoKipkay
►More Laser Videos:
http://bit.ly/KipkayLaserVideos
►
Easy Projects:
http://bit.ly/KipkayEasyProjects
►
Pranks & Jokes:
http://bit.ly/KipkayPranks
►
Hacks & Mods:
http://bit.ly/KipkayHacks
►Spy
Gadgets & Devices:
http://bit.ly/KipkaySpy
►
Explosions &
Loud Things:
http://bit.ly/KipkayExplosions
CAUTION!!
Lasers can be dangerous! Do not
point them at any living thing!
DO NOT look into the beam
...
-
Rumours - Mic Burner & Cactus Agony | New Zambian Music 2016 | DJ Erycom | www.ZambianMusic.net
New Zambian
Music 2016 -
Promoted By DJ Erycom.
To
Download, This Song, Go to
http://www.ZambianMusic.net
http://www.facebook.com/djerycom || Instagram DJ.Erycom
Twitter @ZambianMusicNet OR Twitter @DJErycom
For
Urgent Inquiries,
Please WhatsApp on +256752399999
-
Blazn™ Burner Infrared Hookah Coal Burner
Blazn™
Burner Infrared
Hookah Coal Burner
Hookahjohn opening up and trying the new Blazn Burner for the first time.
Berner ft Nipsey Hussle - Wax Room (Official Music Video)
#drugstorecowboy available now
http://www.livemixtapes.com/mixtapes/22853/berner-drugstore-cowboy
.html
dir by : david camarena
prod by : nima fadavi
#drugstorecowboy available now
http://www.livemixtapes.com/mixtapes/22853/berner-drugstore-cowboy
.html
dir by : david camarena
prod by : nima fadavi
wn.com/Berner Ft Nipsey Hussle Wax Room (Official Music Video)
#drugstorecowboy available now
http://www.livemixtapes.com/mixtapes/22853/berner-drugstore-cowboy
.html
dir by : david camarena
prod by : nima fadavi
- published: 09 Oct 2013
- views: 5432285
Future x Young Thug Type Beat - "Burner"
Pick up a lease at my beat store here:
http://JacobLethalBeats.com/
---------------------------------------------
E-mail // JacobLethal@gmail.com
Soundcloud
...
Pick up a lease at my beat store here:
http://JacobLethalBeats.com/
---------------------------------------------
E-mail // JacobLethal@gmail.com
Soundcloud // soundcloud.com/JacobLethalBeats
Twitter // @JacobLethal
---------------------------------------------
Future Type Type
Beat
Future Type Type Beat 2016
Young Thug Type Beat
Young Thug Type Beat 2016
wn.com/Future X Young Thug Type Beat Burner
Pick up a lease at my beat store here:
http://JacobLethalBeats.com/
---------------------------------------------
E-mail // JacobLethal@gmail.com
Soundcloud // soundcloud.com/JacobLethalBeats
Twitter // @JacobLethal
---------------------------------------------
Future Type Type
Beat
Future Type Type Beat 2016
Young Thug Type Beat
Young Thug Type Beat 2016
- published: 13 Jun 2015
- views: 272210
Cheap low consumption homemade burner
This is the new burner i made,it works perfect,this test show how it burns with chainsaw leftovers,i am using two fan`s,one is for burner and other is to preven
...
This is the new burner i made,it works perfect,this test show how it burns with chainsaw leftovers,i am using two fan`s,one is for burner and other is to prevent to smoke goes back thru pipe and that fan also helps to push sawdust or wood chip to burner,it is low consumption burner and cheap to make,you can put it to any stove just have to make a frame,so for any question send me mail and i will answer you,in next video you will see how burner works on my water heater
wn.com/Cheap Low Consumption Homemade Burner
This is the new burner i made,it works perfect,this test show how it burns with chainsaw leftovers,i am using two fan`s,one is for burner and other is to prevent to smoke goes back thru pipe and that fan also helps to push sawdust or wood chip to burner,it is low consumption burner and cheap to make,you can put it to any stove just have to make a frame,so for any question send me mail and i will answer you,in next video you will see how burner works on my water heater
- published: 25 Sep 2015
- views: 43398
waste oil burner for scrapping construction and first fire up
LOTS OF OTHER BURNER VIDS ON MY CHANNEL!!
DIY Waste Oil Burner for high power heating and
Melting for scrapping.
Build demonstration and first firing up to show running.** Before bitching about a bit of smoke on this first
TEST run, PLEASE look at the other vids on my channel of this burner
Running perfectly
CLEAN before making stupid environmental green washed comments. **
UPDATE: https://www.youtube.com/watch?v=0F69S8sKJIM&feature;=youtube_gdata
Waste oil burner designed for melting scrap aluminium and maybe copper as well as foundary use. The burner will run on any waste oil including used engine oil, waste vegetable oil, transmission fluid or even liquid lard. The oil burner was built from an old fire extinguisher bottle and some car exhaust pieces. The only measurements taken were that of the exhaust pipe which is 50MM. The positioning of the inlet and outlet was simply eyeballed.
As can be seen by the paint burning off, the waste oil burner was built and then fired up successfully from the very first lighting. To preheat, a piece of old oily rag is used. This wicks up the oil in the bottom of the burner and pre heats the oil to vaporise and burn.
With a stronger blower and without excessive oil in the burner when lit, startup will normally be much quicker and output far stronger.
The blower is from a car and was very underpowered for the potential of this burner. The pulsing flame on startup is due to the weak air supply and when Filming the vid I forgot to turn the oil off so upon lighting had a large pool in the bottom. As can be seen later in the Vid, once the excess oil has burned off the flame is steady. The excess smoke is a factor of the weak air supply not mixing correctly with the vaporised oil. With the right strength blower combustion will be totally clean.
With a strong air supply I expect the potential output of this burner to exceede
200 Kw and maybe over 300KW, depending on the strength of the air source used.
The downward firing is to facilitate the melting of small pieces of scrap aluminium parts and to seperate these from steel components with a minimum of labour.
Fuel regulation was simply with a 1/4" ball valve. The waste engine oil used was very thick and not quite flowing quick enough to keep up with the demands of the burner even at the low air supply.
The test was successful however in that the burner fired up easily even with nearly every less than ideal factor against it and ran well given the low air supply. I expect it to be a very different beast when fed sufficent
Oxygen.
wn.com/Waste Oil Burner For Scrapping Construction And First Fire Up
LOTS OF OTHER BURNER VIDS ON MY CHANNEL!!
DIY Waste Oil Burner for high power heating and
Melting for scrapping.
Build demonstration and first firing up to show running.** Before bitching about a bit of smoke on this first
TEST run, PLEASE look at the other vids on my channel of this burner
Running perfectly
CLEAN before making stupid environmental green washed comments. **
UPDATE: https://www.youtube.com/watch?v=0F69S8sKJIM&feature;=youtube_gdata
Waste oil burner designed for melting scrap aluminium and maybe copper as well as foundary use. The burner will run on any waste oil including used engine oil, waste vegetable oil, transmission fluid or even liquid lard. The oil burner was built from an old fire extinguisher bottle and some car exhaust pieces. The only measurements taken were that of the exhaust pipe which is 50MM. The positioning of the inlet and outlet was simply eyeballed.
As can be seen by the paint burning off, the waste oil burner was built and then fired up successfully from the very first lighting. To preheat, a piece of old oily rag is used. This wicks up the oil in the bottom of the burner and pre heats the oil to vaporise and burn.
With a stronger blower and without excessive oil in the burner when lit, startup will normally be much quicker and output far stronger.
The blower is from a car and was very underpowered for the potential of this burner. The pulsing flame on startup is due to the weak air supply and when Filming the vid I forgot to turn the oil off so upon lighting had a large pool in the bottom. As can be seen later in the Vid, once the excess oil has burned off the flame is steady. The excess smoke is a factor of the weak air supply not mixing correctly with the vaporised oil. With the right strength blower combustion will be totally clean.
With a strong air supply I expect the potential output of this burner to exceede
200 Kw and maybe over 300KW, depending on the strength of the air source used.
The downward firing is to facilitate the melting of small pieces of scrap aluminium parts and to seperate these from steel components with a minimum of labour.
Fuel regulation was simply with a 1/4" ball valve. The waste engine oil used was very thick and not quite flowing quick enough to keep up with the demands of the burner even at the low air supply.
The test was successful however in that the burner fired up easily even with nearly every less than ideal factor against it and ran well given the low air supply. I expect it to be a very different beast when fed sufficent
Oxygen.
- published: 02 Jul 2014
- views: 2993863
How to build a Waste oil Burner for heating, scrapping or aluminium melting
Building a simple
Waste oil
Burner to run on used Vegetable
WVO or motor oil.
Please like, share and see the other vids on my channel.
This video shows step by
...
Building a simple
Waste oil
Burner to run on used Vegetable
WVO or motor oil.
Please like, share and see the other vids on my channel.
This video shows step by step how easy it is to construct a waste oil burner capable of
Burning any flammable liquid. For the safety zealots and assorted whingers, this is a vid on how to build a waste oil burner, not how to weld or use the tools. Please only comment on this if you have a vid of your own to demonstrate how you do things different.
The burner is made from an old fire extinguisher bottle
and some old exhaust pipe. The waste oil inlet was a bit of metal fuel line I hacked out of a scrap car body. The burner as shown is simply 2 holes cut in the bottle and the 2 pieces of exhaust cut and welded in. a
hole is drilled in the inlet pipe and the metal fuel line is inserted and the oil is simply blown in with the air.
The dimensions of the individual components are unimportant as the design is very tolerant.
All that neds to be borne in mind is there needs to be some swirling of the air inside of the burner and to pre heat it.
Please feel free to comment or hit the like button if you found the video helpful.
Thanks.
wn.com/How To Build A Waste Oil Burner For Heating, Scrapping Or Aluminium Melting
Building a simple
Waste oil
Burner to run on used Vegetable
WVO or motor oil.
Please like, share and see the other vids on my channel.
This video shows step by step how easy it is to construct a waste oil burner capable of
Burning any flammable liquid. For the safety zealots and assorted whingers, this is a vid on how to build a waste oil burner, not how to weld or use the tools. Please only comment on this if you have a vid of your own to demonstrate how you do things different.
The burner is made from an old fire extinguisher bottle
and some old exhaust pipe. The waste oil inlet was a bit of metal fuel line I hacked out of a scrap car body. The burner as shown is simply 2 holes cut in the bottle and the 2 pieces of exhaust cut and welded in. a
hole is drilled in the inlet pipe and the metal fuel line is inserted and the oil is simply blown in with the air.
The dimensions of the individual components are unimportant as the design is very tolerant.
All that neds to be borne in mind is there needs to be some swirling of the air inside of the burner and to pre heat it.
Please feel free to comment or hit the like button if you found the video helpful.
Thanks.
- published: 10 Sep 2014
- views: 186383
Block burner the movie
duval county lived written and starring block burner aka 1stpilot
duval county lived written and starring block burner aka 1stpilot
wn.com/Block Burner The Movie
duval county lived written and starring block burner aka 1stpilot
- published: 01 May 2014
- views: 104926
How to make a spirit turbo burner up to +1500 °С
In today's video I'm going to show you the idea of making a simple and easy spirit turbo burner up to +1500o C with your own hands at home.
It's quite easy and
...
In today's video I'm going to show you the idea of making a simple and easy spirit turbo burner up to +1500o C with your own hands at home.
It's quite easy and simple to make a spirit turbo burner up to +1500o C with your own hands. And the biggest advantage is that hand made burner won't take much time and money! Easy-to-manufacture hand made liquid-fuel turbo burner will be useful both for tourists and summer residents
. In the burner spirit is not burning, the spirit vapor is burning here. The vapor will appear itself as a result of heating of the burner from the candle heat.
Watch this video and make a turbo burner by yourself almost for free!
Welcome to my channel
Roman UrsuHack where you will learn how to make hand made crafts,
New Year crafts, presents, toys,
Halloween scares. The main thing is that one can make it at home and with one's own hands.
You are interested in handiwork, craft or you just have nothing to do, haven't you? You have found the channel you really need. Here you can find lots of crafts, hand made items, and the main thing is that they all made of make-shifts and at the lowest cost!
SITE : www.romanursu.com
Main channel:
http://www.youtube.com/user/romanursu
My second channel: https://www.youtube.com/user/romanurs
...
Vkontakte community: http://vk.com/club59870517
Odnoklassniki.ru community: http://www.odnoklassniki.ru/romanursu
wn.com/How To Make A Spirit Turbo Burner Up To 1500 °С
In today's video I'm going to show you the idea of making a simple and easy spirit turbo burner up to +1500o C with your own hands at home.
It's quite easy and simple to make a spirit turbo burner up to +1500o C with your own hands. And the biggest advantage is that hand made burner won't take much time and money! Easy-to-manufacture hand made liquid-fuel turbo burner will be useful both for tourists and summer residents
. In the burner spirit is not burning, the spirit vapor is burning here. The vapor will appear itself as a result of heating of the burner from the candle heat.
Watch this video and make a turbo burner by yourself almost for free!
Welcome to my channel
Roman UrsuHack where you will learn how to make hand made crafts,
New Year crafts, presents, toys,
Halloween scares. The main thing is that one can make it at home and with one's own hands.
You are interested in handiwork, craft or you just have nothing to do, haven't you? You have found the channel you really need. Here you can find lots of crafts, hand made items, and the main thing is that they all made of make-shifts and at the lowest cost!
SITE : www.romanursu.com
Main channel:
http://www.youtube.com/user/romanursu
My second channel: https://www.youtube.com/user/romanurs
...
Vkontakte community: http://vk.com/club59870517
Odnoklassniki.ru community: http://www.odnoklassniki.ru/romanursu
- published: 11 Jul 2015
- views: 310841
Homemade Propane Foundry Burner
Just a propane burner that I use in my home foundry, it works great for melting aluminum and other metals that melt at around 1200°F (660°C).
Thanks for watch
...
Just a propane burner that I use in my home foundry, it works great for melting aluminum and other metals that melt at around 1200°F (660°C).
Thanks for watching and leave me a comment with your feedback, I will be happy to read it.
Parts list:
*all parts are either brass pipe fittings or black iron pipe fittings*
*
DO NOT USE GALVANIZED STEEL AS IT WILL RELEASE TOXIC FUMES WHEN HEATED*
1"-3/4" bell reducer
3/4"-8" pipe nipple
1"-5" pipe nipple
X2 1/8"-4" brass pipe nipple
1/8" coupler
1/8" 90° elbow
1/8" end cap
Instruction guide:
http://www.instructables.com/id/how-to-build-a-gas-forge-burner/?ALLSTEPS
A10 graphite crucible:
http://www.ebay.com/itm/like/221851228503?ul_noapp=true&chn;=ps&lpid;=82
Inspiration for foundry design:
https://www.youtube.com/watch?v=UXeCYmAQg6U
Kast O
Lite 30 refractory:
http://www.ebay.com/itm/like/131485792995?ul_noapp=true&chn;=ps&lpid;=82
wn.com/Homemade Propane Foundry Burner
Just a propane burner that I use in my home foundry, it works great for melting aluminum and other metals that melt at around 1200°F (660°C).
Thanks for watching and leave me a comment with your feedback, I will be happy to read it.
Parts list:
*all parts are either brass pipe fittings or black iron pipe fittings*
*
DO NOT USE GALVANIZED STEEL AS IT WILL RELEASE TOXIC FUMES WHEN HEATED*
1"-3/4" bell reducer
3/4"-8" pipe nipple
1"-5" pipe nipple
X2 1/8"-4" brass pipe nipple
1/8" coupler
1/8" 90° elbow
1/8" end cap
Instruction guide:
http://www.instructables.com/id/how-to-build-a-gas-forge-burner/?ALLSTEPS
A10 graphite crucible:
http://www.ebay.com/itm/like/221851228503?ul_noapp=true&chn;=ps&lpid;=82
Inspiration for foundry design:
https://www.youtube.com/watch?v=UXeCYmAQg6U
Kast O
Lite 30 refractory:
http://www.ebay.com/itm/like/131485792995?ul_noapp=true&chn;=ps&lpid;=82
- published: 07 Sep 2015
- views: 2890
California: 'Burner Phones' May Require Verifiable ID If New Bill Passes
www.undergroundworldnews.com
Save On
Official DAHBOO7
Gear with
Code "5off"
http://dahboo7.deco-street.com/
Burner phones, beloved by criminals and TV writers everywhere, could be a thing of the past if a new bill by
California lawmakers passes.
The proposed law would require prepaid phone customers to register their personal details before purchasing a burner phone or
SIM card.
The
Closing of Prepaid
Mobile Device Security Gap bill, introduced by
Jonestown massacre survivor
State Rep
Jackie Speier, could make it harder for those hoping to communicate anonymously.
Retailers would be required to verify those details at purchase and keep a record of the details gathered.
Learn More:
https://www.rt.com/usa/337321-burner-phones-california-bill/#.VvcaQlBRci0.twitter
wn.com/California 'Burner Phones' May Require Verifiable Id If New Bill Passes
www.undergroundworldnews.com
Save On
Official DAHBOO7
Gear with
Code "5off"
http://dahboo7.deco-street.com/
Burner phones, beloved by criminals and TV writers everywhere, could be a thing of the past if a new bill by
California lawmakers passes.
The proposed law would require prepaid phone customers to register their personal details before purchasing a burner phone or
SIM card.
The
Closing of Prepaid
Mobile Device Security Gap bill, introduced by
Jonestown massacre survivor
State Rep
Jackie Speier, could make it harder for those hoping to communicate anonymously.
Retailers would be required to verify those details at purchase and keep a record of the details gathered.
Learn More:
https://www.rt.com/usa/337321-burner-phones-california-bill/#.VvcaQlBRci0.twitter
- published: 27 Mar 2016
- views: 1657
Why You Need a Burner Phone
Brian and
Jason talk about the ins and outs of burner phones.
Don’t get burned by using these hot tips that’ll heat up your already fire communication game
. 🔥
...
Brian and
Jason talk about the ins and outs of burner phones.
Don’t get burned by using these hot tips that’ll heat up your already fire communication game. 🔥
This episode was made with the help of:
Brian Brushwood - host --
http://twitter.com/shwood
Jason Murphy - host / research -- http://twitter.com/captainmurphy
Brandt Hughes - camera
operator / editor -- http://twitter.com/gatowag
Bryce
Castillo - camera operator -- http://twitter.com/brycas
wn.com/Why You Need A Burner Phone
Brian and
Jason talk about the ins and outs of burner phones.
Don’t get burned by using these hot tips that’ll heat up your already fire communication game. 🔥
This episode was made with the help of:
Brian Brushwood - host --
http://twitter.com/shwood
Jason Murphy - host / research -- http://twitter.com/captainmurphy
Brandt Hughes - camera
operator / editor -- http://twitter.com/gatowag
Bryce
Castillo - camera operator -- http://twitter.com/brycas
- published: 25 Feb 2016
- views: 7099
【SEGA爆音ジャズ】After Burner【東京アクティブNEETs】
伝説のアーケードゲーム、アフターバーナーのテーマを爆音ジャズアレンジして演奏してみました!!去年SEGAのコンポーザーであるHiro師匠の入社30周年アルバムに収録された曲なのですが、この度maimaiへの収録も決定しました!ぜひ遊んでみてくださいね!
Web
Site :
http://neets.tokyo
Tw
...
伝説のアーケードゲーム、アフターバーナーのテーマを爆音ジャズアレンジして演奏してみました!!去年SEGAのコンポーザーであるHiro師匠の入社30周年アルバムに収録された曲なのですが、この度maimaiへの収録も決定しました!ぜひ遊んでみてくださいね!
Web
Site :
http://neets.tokyo
Twitter : https://twitter.com/active_neets
Facebook : https://www.facebook.com/activeneets/
*********
セガ音楽ゲームmaimaiに収録決定!
2/18より全国のゲームセンターで条件付き解禁開始!
※maimai PiNKの条件付き解禁仕様「チャレンジトラック」の対象曲です。
※3/17より誰でも遊べるようになります。
maimai PiNK公式サイト
遊べるお店や最新情報はこちらへ!
http://maimai.sega.jp/
この音源は下記CDにも収録されてます!
Hiro 30th Anniversary Album Thank you for listening!
http://ebten.jp/sega/p/4571164388694/
*********
wn.com/【Sega爆音ジャズ】After Burner【東京アクティブNeets】
伝説のアーケードゲーム、アフターバーナーのテーマを爆音ジャズアレンジして演奏してみました!!去年SEGAのコンポーザーであるHiro師匠の入社30周年アルバムに収録された曲なのですが、この度maimaiへの収録も決定しました!ぜひ遊んでみてくださいね!
Web
Site :
http://neets.tokyo
Twitter : https://twitter.com/active_neets
Facebook : https://www.facebook.com/activeneets/
*********
セガ音楽ゲームmaimaiに収録決定!
2/18より全国のゲームセンターで条件付き解禁開始!
※maimai PiNKの条件付き解禁仕様「チャレンジトラック」の対象曲です。
※3/17より誰でも遊べるようになります。
maimai PiNK公式サイト
遊べるお店や最新情報はこちらへ!
http://maimai.sega.jp/
この音源は下記CDにも収録されてます!
Hiro 30th Anniversary Album Thank you for listening!
http://ebten.jp/sega/p/4571164388694/
*********
- published: 17 Feb 2016
- views: 829
Burner - Five Pills (And a Bottle of Whiskey)
Check out
http://www.sludgeswamp.blogspot.com/ for the best
Stoner Rock collection on the net trust me you guys wont be dissapointed by this site very well run
....
Check out
http://www.sludgeswamp.blogspot.com/ for the best
Stoner Rock collection on the net trust me you guys wont be dissapointed by this site very well run
...what are you waiting for check it out
wn.com/Burner Five Pills (And A Bottle Of Whiskey)
Check out
http://www.sludgeswamp.blogspot.com/ for the best
Stoner Rock collection on the net trust me you guys wont be dissapointed by this site very well run
...what are you waiting for check it out
- published: 23 May 2009
- views: 196811
Burner Phone from Chinatown
Burner Phone from
Chinatown /
Cheap $
100 Tech Haul from Chinatown / Chinatown
Shopping Adventure 2016 / Cheap Chinatown Tech
Part 1 - https://youtu.be/m89hlwYHaVA
Subscribe:
http://bit.ly/1vyhAM9
BUY A SHIRT: http://bit.ly/1Ns2I9Q
FOLLOW ME!
Facebook: http://facebook.com/techsmarttyt
Snapchat: http://snapchat.com/add/techsmartt
Instagram: http://instagram.com/keaton
Twitter: http://twitter.com/keaton
wn.com/Burner Phone From Chinatown
Burner Phone from
Chinatown /
Cheap $
100 Tech Haul from Chinatown / Chinatown
Shopping Adventure 2016 / Cheap Chinatown Tech
Part 1 - https://youtu.be/m89hlwYHaVA
Subscribe:
http://bit.ly/1vyhAM9
BUY A SHIRT: http://bit.ly/1Ns2I9Q
FOLLOW ME!
Facebook: http://facebook.com/techsmarttyt
Snapchat: http://snapchat.com/add/techsmartt
Instagram: http://instagram.com/keaton
Twitter: http://twitter.com/keaton
- published: 06 Mar 2016
- views: 28144
Oil Burner maintenance - setting electrodes and replacing nozzle
This video shows you how to adjust the electodes in an oil burner and how to replace an oil nozzle.
This video shows you how to adjust the electodes in an oil burner and how to replace an oil nozzle.
wn.com/Oil Burner Maintenance Setting Electrodes And Replacing Nozzle
This video shows you how to adjust the electodes in an oil burner and how to replace an oil nozzle.
- published: 14 Jan 2014
- views: 136347
♠ Motörhead ♠ Burner VIDEO
The Classic "
Burner" (feat.
Wurzel) by MOTÖRHEAD
http://www.amazon.de/s/ref=nb_sb_ss_c_0_13/280-2109091-9117250?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&url;=
...
The Classic "
Burner" (feat.
Wurzel) by MOTÖRHEAD
http://www.amazon.de/s/ref=nb_sb_ss_c_0_13/280-2109091-9117250?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&url;=search-alias%3Dpopular&field-keywords;=mot%C3%B6rhead%20bastards&sprefix;=Mot%C3%B6rhead+Bas%2Caps%2C299
wn.com/♠ Motörhead ♠ Burner Video
The Classic "
Burner" (feat.
Wurzel) by MOTÖRHEAD
http://www.amazon.de/s/ref=nb_sb_ss_c_0_13/280-2109091-9117250?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&url;=search-alias%3Dpopular&field-keywords;=mot%C3%B6rhead%20bastards&sprefix;=Mot%C3%B6rhead+Bas%2Caps%2C299
- published: 15 Apr 2014
- views: 14723
Amazing Cheapy Lighter Laser Burner!
Hack a cheap butane lighter and make the world's first "flick-style" burning laser lighter! Detailed instructions to build one on
http://www.kipkay.com
LASERDIY
...
Hack a cheap butane lighter and make the world's first "flick-style" burning laser lighter! Detailed instructions to build one on
http://www.kipkay.com
LASERDIY is no longer in business.
Get
Early Access to my videos for
30 days FREE by checking out
Vessel: http://vessel.com/kipkay
Get the parts to build your own: http://kipkay.com/parts/
Subscribe to
Kipkay: http://bit.ly/SubscribetoKipkay
►More Laser Videos:
http://bit.ly/KipkayLaserVideos
►
Easy Projects:
http://bit.ly/KipkayEasyProjects
►
Pranks & Jokes:
http://bit.ly/KipkayPranks
►
Hacks & Mods:
http://bit.ly/KipkayHacks
►Spy
Gadgets & Devices:
http://bit.ly/KipkaySpy
►
Explosions &
Loud Things:
http://bit.ly/KipkayExplosions
CAUTION!!
Lasers can be dangerous! Do not
point them at any living thing!
DO NOT look into the beam or the reflection of the beam.
Always wear laser goggles.
wn.com/Amazing Cheapy Lighter Laser Burner
Hack a cheap butane lighter and make the world's first "flick-style" burning laser lighter! Detailed instructions to build one on
http://www.kipkay.com
LASERDIY is no longer in business.
Get
Early Access to my videos for
30 days FREE by checking out
Vessel: http://vessel.com/kipkay
Get the parts to build your own: http://kipkay.com/parts/
Subscribe to
Kipkay: http://bit.ly/SubscribetoKipkay
►More Laser Videos:
http://bit.ly/KipkayLaserVideos
►
Easy Projects:
http://bit.ly/KipkayEasyProjects
►
Pranks & Jokes:
http://bit.ly/KipkayPranks
►
Hacks & Mods:
http://bit.ly/KipkayHacks
►Spy
Gadgets & Devices:
http://bit.ly/KipkaySpy
►
Explosions &
Loud Things:
http://bit.ly/KipkayExplosions
CAUTION!!
Lasers can be dangerous! Do not
point them at any living thing!
DO NOT look into the beam or the reflection of the beam.
Always wear laser goggles.
- published: 31 Jul 2009
- views: 23818576