Easy Rust Repair the 'Hack' Way -EricTheCarGuy
As you may know my
1993 Acura Vigor had some pretty bad water leaks into the trunk due to rust issues. To repair them I needed to do a little body work. In this video I show how to do body work using 'hack' methods to get you by. In order to do this 'properly' it would have been best to cut out the old rusted material and weld in new metal. I didn't feel that my $
500 Acura Vigor was worth that effort so I did what you see here in this video. As stated this method works very well for floor pans or other areas where you're not necessarily going to see the finished product.
Honestly, I don't think things turned out so bad, in fact, I have a new appreciation for the car now that
I've done this work, despite the fact that the paint doesn't' match.
Perhaps one day I'll go back and finish it properly and respray the entire car. For now, I have other work to do to keep this car in good working order.
Camera:
Brian Kast
If you want to see how real body work is done? Check out my friend
Donnie Smith's channel.
https://www.youtube.com/channel/UCzA2PE7vg9R_ebLiBSjCxEw
The best place for answers to your automotive questions:
http://www
.ericthecarguy.com
There is an extended version of this video available to
Premium Members of EricTheCarGuy.com.
Click here: https://www.ericthecarguy.com/premium-content-streaming-etcg-content
Related Videos.
Finding
Water Leaks: https://www.youtube.com/watch?v=tecuW9cB-Xk
Introduction to my Acura Vigor: https://www.youtube.com/watch?v=GgKqLr353VY
Tools.
Angle Die Grinder: http://www.jbtoolsales.com/ingersoll-rand-301b2mk-air-angle-die-grinder-2-kit/#oid=1002_1
Cutting
Bits (with die grinder set): http://www.jbtoolsales.com/astro-pneumatic-219-onyx-3-piece-die-grinder-kit/#oid=1002_1
Pneumatic sander: http://www.jbtoolsales.com/performance-tool-m573db-5-high-speed-sander/#oid=1002_1
Blow Gun: http://www.jbtoolsales.com/titan-tools-19360-air-blow-gun-4/#oid=1002_1
Dust Mask: http://www.jbtoolsales.com/sas-safety-2661-50-professional-blue-half-mask-respirator-medium/#oid=1002_1
Filler applicators: http://www.jbtoolsales.com/performance-tool-w407c-3-pc-body-filler-applicator/#oid=1002_1
Fillers.
Rust inhibitor: http://www.jbtoolsales.com/permatex-81849-rust-treat-body-fillr-com-each/#oid=1002_1
Fiber
Strand: http://www.westmarine.com/putties-sealers/3m--dyna-glass-filler-qt--11656477
Tiger Hair: http://www.handsontools.com/Evercoat-1189-Tiger-Hair-Long-Strand-Reinforced-Filler-quart_p_10737
.html
Related Articles.
Finding and Fixing Leaks: http://www.ericthecarguy.com/faq/finding-and-fixing-leaks
Discussion about this video: http://www.ericthecarguy.com/kunena/18-The-EricTheCarGuy-Video-Forum/51619-easy-rust-repair-the-hack-way#100004
EricTheCarGuy code lookup: http://www.ericthecarguy.com/obd-code-lookup
Facebook: https://www.facebook.com/EricTheCarGuy?fref=ts
Twitter: https://twitter.com/EricTheCarGuy
Google+: https://plus.google.com/100195180196698058780/posts
Information on Premium Membership: https://www.ericthecarguy.com/premium-content-streaming-etcg-content
Stay Dirty
ETCG
Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.