Drift pin

In metalworking, a drift pin, drift pin punch, or simply drift, is the name for a tool used for enlarging holes, or aligning holes prior to bolting or riveting metal parts together. A drift pin is not used as a punch in the traditional sense of the term. A drift is constructed as a tapered rod, with the hammer acting on the large end of the taper. The tapered end of a drift punch is placed into the semi-aligned bolt holes of two separate components, and then driven into the hole. As it is driven in, the taper forces the two components into alignment, allowing for easy insertion of the fastener. Unlike most punches, force should never be applied to the tip of drift pin.

Drift pins are especially useful for aligning fastener holes in structural steel members. Spud wrenches used for assembling trusses and steel beams have tapered handles to use as drift pins.

See also

References

Drift

Art, film, and literature

Geography

Industry

Pin

A pin is a device used for fastening objects or material together. Pins often have two components: a long body and sharp tip made of steel, or occasionally copper or brass, and a larger head often made of plastic. The sharpened body penetrates the material, while the larger head provides a driving surface. It is formed by drawing out a thin wire, sharpening the tip, and adding a head. Nails are related, but are typically larger. In machines and engineering, pins are commonly used as pivots, hinges, shafts, jigs, and fixtures to locate or hold parts.

Sewing and fashion pins

Curved sewing pins have been used for over four thousand years. Originally, they were fashioned out of iron and bone by the Sumerians and were used to hold clothes together. Later, these pins were also used to hold pages together by threading the needle through their top corner.

Many late pins were made of brass, a hard metal. Steel was used later, as it was much stronger, but there was no easy process to keep steel from rusting, so higher quality pins were plated with nickel, but the metal would start to break down and flake off in high humidity, allowing rust to form. Steel pins were not that inconvenient for homemaking uses as they were usually only used temporarily while sewing garments.