- published: 16 Oct 2015
- views: 66046
Create your page here
Sunday, 16 October 2016
-
remove the playlistLathe (tool)
- remove the playlistLathe (tool)
back to playlist
In this video a build a really simple tool for centering parts on a lathe.
- published: 30 Jun 2015
- views: 71384
My take on grinding HSS lathe tools. The forms of tools and angles discussed may not be what is shown in books but they work well for me and make grinding much simpler.
- published: 22 Mar 2013
- views: 137114
In this video I discuss cutter geometry of the turning and facing tool for the lathe and do a demonstration on how to grind them.
- published: 21 Oct 2013
- views: 78529
In part 1 of this three-part series on grinding HSS lathe tools Barry Young of Bates Technical College in Tacoma WA walks us through the process of grinding a right hand lathe tool.
Barry uses a mild steel blank (instead of HSS) for demonstration purposes as it grinds much faster. When practicing it is a good idea for you to also start with mild steel. After you have successfully created a few tools from mild steel, try a HSS blank. This will save you time and perhaps more importantly, money. HSS tool blanks are much more expensive than a chunk of mild steel, and they will also put more wear on your grinding wheel while you're learning and making mistakes than a mild steel blank will.
Be safe, be patient, and be persistent. Grinding your own tools can be rewarding and fun ... once you get the hang of it. For more tips and tutorials (including how to sharpen drill bits by hand) visit the rest of the videos on this channel, subscribe, and don't forget to visit our website.
Thanks for watching!
- published: 06 Oct 2012
- views: 90444
Many quality tools these days come without a handle. This helps reduce the cost and allows you to make a handle that is customized for you; plus they are fun to make! This video demonstrates how to make your own wooden lathe tool handle.
- published: 26 Nov 2014
- views: 7686
Sixth of my "Little Quickie" videos. I produce these shorter than usual videos to answer viewer questions about machining. As for all thatlazymachinist videos, this video is aimed at the novice machinist who wishes to develop proper basic work skills. More specifically, this video answers Alain, Mark and Jacky's question about how to position their tools cutting edges for lathe work. MARC LECUYER, thatlazymachinist.com
- published: 04 Feb 2014
- views: 17422
In which I turn a tool handle FOR a carbide tool, USING carbide tools.
- published: 04 Sep 2014
- views: 10667
Are you ready to buy your first set of lathe chisels? Do you need a gouge, scraper, or parting tool? Or all of the above? Here’s some great buying advice that will help you choose your chisels. In addition to learning what chisels you need, you’ll see how the chisels are used.
- published: 15 Dec 2014
- views: 42960
Lathe
A lathe /ˈleɪð/ is a machine tool that rotates the workpiece on its axis to perform various operations such as cutting, sanding, knurling, drilling, or deformation, facing, turning, with tools that are applied to the workpiece to create an object with symmetry about an axis of rotation.
Lathes are used in woodturning, metalworking, metal spinning, thermal spraying, parts reclamation, and glass-working. Lathes can be used to shape pottery, the best-known design being the potter's wheel. Most suitably equipped metalworking lathes can also be used to produce most solids of revolution, plane surfaces and screw threads or helices. Ornamental lathes can produce three-dimensional solids of incredible complexity. The workpiece is usually held in place by either one or two centers, at least one of which can typically be moved horizontally to accommodate varying workpiece lengths. Other work-holding methods include clamping the work about the axis of rotation using a chuck or collet, or to a faceplate, using clamps or dogs.
This page contains text from Wikipedia, the Free Encyclopedia -
https://wn.com/Lathe
This article is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License, which means that you can copy and modify it as long as the entire work (including additions) remains under this license.
This article is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License, which means that you can copy and modify it as long as the entire work (including additions) remains under this license.
Tool
A tool is any physical item that can be used to achieve a goal, especially if the item is not consumed in the process. Tool use by humans dates back millions of years, and other animals are also known to employ simple tools.
Tools that are used in particular fields or activities may have different designations such as "instrument", "utensil", "implement", "machine", "device," or "apparatus". The set of tools needed to achieve a goal is "equipment". The knowledge of constructing, obtaining and using tools is technology.
History
Anthropologists believe that the use of tools was an important step in the evolution of mankind. Because tools are used extensively by both humans and wild chimpanzees, it is widely assumed that the first routine use of tools took place prior to the divergence between the two species. These early tools, however, were likely made of perishable materials such as sticks, or consisted of unmodified stones that cannot be distinguished from other stones as tools.
Stone artifacts only date back to about 2.5 million years ago. However, a 2010 study suggests the hominin species Australopithecus afarensis ate meat by carving animal carcasses with stone implements. This finding pushes back the earliest known use of stone tools among hominins to about 3.4 million years ago.
This page contains text from Wikipedia, the Free Encyclopedia -
https://wn.com/Tool
This article is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License, which means that you can copy and modify it as long as the entire work (including additions) remains under this license.
This article is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License, which means that you can copy and modify it as long as the entire work (including additions) remains under this license.
- Loading...
-
26:56Cutting Tool Geometries Lathe and Mill SME
Cutting Tool Geometries Lathe and Mill SMECutting Tool Geometries Lathe and Mill SME
-
4:17Lathe Centering Tool
Lathe Centering ToolLathe Centering Tool
In this video a build a really simple tool for centering parts on a lathe. -
31:45Lathe Tool Grinding Part 1
Lathe Tool Grinding Part 1Lathe Tool Grinding Part 1
My take on grinding HSS lathe tools. The forms of tools and angles discussed may not be what is shown in books but they work well for me and make grinding much simpler. -
23:44Grinding Turning and Facing Tools for the Lathe
Grinding Turning and Facing Tools for the LatheGrinding Turning and Facing Tools for the Lathe
In this video I discuss cutter geometry of the turning and facing tool for the lathe and do a demonstration on how to grind them. -
8:59Grinding HSS Lathe Tools - Part 1: Grinding a RH Tool
Grinding HSS Lathe Tools - Part 1: Grinding a RH ToolGrinding HSS Lathe Tools - Part 1: Grinding a RH Tool
In part 1 of this three-part series on grinding HSS lathe tools Barry Young of Bates Technical College in Tacoma WA walks us through the process of grinding a right hand lathe tool. Barry uses a mild steel blank (instead of HSS) for demonstration purposes as it grinds much faster. When practicing it is a good idea for you to also start with mild steel. After you have successfully created a few tools from mild steel, try a HSS blank. This will save you time and perhaps more importantly, money. HSS tool blanks are much more expensive than a chunk of mild steel, and they will also put more wear on your grinding wheel while you're learning and making mistakes than a mild steel blank will. Be safe, be patient, and be persistent. Grinding your own tools can be rewarding and fun ... once you get the hang of it. For more tips and tutorials (including how to sharpen drill bits by hand) visit the rest of the videos on this channel, subscribe, and don't forget to visit our website. Thanks for watching! -
3:59How to make a Tool Handle on a Wood Lathe
How to make a Tool Handle on a Wood LatheHow to make a Tool Handle on a Wood Lathe
Many quality tools these days come without a handle. This helps reduce the cost and allows you to make a handle that is customized for you; plus they are fun to make! This video demonstrates how to make your own wooden lathe tool handle. -
14:25LQ#006 Positioning lathe tool cutting edges, MARC LECUYER
LQ#006 Positioning lathe tool cutting edges, MARC LECUYERLQ#006 Positioning lathe tool cutting edges, MARC LECUYER
Sixth of my "Little Quickie" videos. I produce these shorter than usual videos to answer viewer questions about machining. As for all thatlazymachinist videos, this video is aimed at the novice machinist who wishes to develop proper basic work skills. More specifically, this video answers Alain, Mark and Jacky's question about how to position their tools cutting edges for lathe work. MARC LECUYER, thatlazymachinist.com -
12:16Woodturning a lathe tool handle using carbide tools
Woodturning a lathe tool handle using carbide toolsWoodturning a lathe tool handle using carbide tools
In which I turn a tool handle FOR a carbide tool, USING carbide tools. -
10:17Understanding a Starter Set of Lathe Chisels | Woodworkers Guild of America
Understanding a Starter Set of Lathe Chisels | Woodworkers Guild of AmericaUnderstanding a Starter Set of Lathe Chisels | Woodworkers Guild of America
Are you ready to buy your first set of lathe chisels? Do you need a gouge, scraper, or parting tool? Or all of the above? Here’s some great buying advice that will help you choose your chisels. In addition to learning what chisels you need, you’ll see how the chisels are used. -
10:46TOOL BIT GRINDING #1 South Bend Atlas Lathe tubalcain
TOOL BIT GRINDING #1 South Bend Atlas Lathe tubalcain
-
Cutting Tool Geometries Lathe and Mill SME
published: 16 Oct 2015 -
Lathe Centering Tool
In this video a build a really simple tool for centering parts on a lathe.
published: 30 Jun 2015 -
Lathe Tool Grinding Part 1
My take on grinding HSS lathe tools. The forms of tools and angles discussed may not be what is shown in books but they work well for me and make grinding much simpler.
published: 22 Mar 2013 -
Grinding Turning and Facing Tools for the Lathe
In this video I discuss cutter geometry of the turning and facing tool for the lathe and do a demonstration on how to grind them.
published: 21 Oct 2013 -
Grinding HSS Lathe Tools - Part 1: Grinding a RH Tool
In part 1 of this three-part series on grinding HSS lathe tools Barry Young of Bates Technical College in Tacoma WA walks us through the process of grinding a right hand lathe tool. Barry uses a mild steel blank (instead of HSS) for demonstration purposes as it grinds much faster. When practicing it is a good idea for you to also start with mild steel. After you have successfully created a few tools from mild steel, try a HSS blank. This will save you time and perhaps more importantly, money. HSS tool blanks are much more expensive than a chunk of mild steel, and they will also put more wear on your grinding wheel while you're learning and making mistakes than a mild steel blank will. Be safe, be patient, and be persistent. Grinding your own tools can be rewarding and fun ... once ...
published: 06 Oct 2012 -
How to make a Tool Handle on a Wood Lathe
Many quality tools these days come without a handle. This helps reduce the cost and allows you to make a handle that is customized for you; plus they are fun to make! This video demonstrates how to make your own wooden lathe tool handle.
published: 26 Nov 2014 -
LQ#006 Positioning lathe tool cutting edges, MARC LECUYER
Sixth of my "Little Quickie" videos. I produce these shorter than usual videos to answer viewer questions about machining. As for all thatlazymachinist videos, this video is aimed at the novice machinist who wishes to develop proper basic work skills. More specifically, this video answers Alain, Mark and Jacky's question about how to position their tools cutting edges for lathe work. MARC LECUYER, thatlazymachinist.com
published: 04 Feb 2014 -
Woodturning a lathe tool handle using carbide tools
In which I turn a tool handle FOR a carbide tool, USING carbide tools.
published: 04 Sep 2014 -
Understanding a Starter Set of Lathe Chisels | Woodworkers Guild of America
Are you ready to buy your first set of lathe chisels? Do you need a gouge, scraper, or parting tool? Or all of the above? Here’s some great buying advice that will help you choose your chisels. In addition to learning what chisels you need, you’ll see how the chisels are used.
published: 15 Dec 2014 -
Cutting Tool Geometries Lathe and Mill SME
- Order: Reorder
- Duration: 26:56
- Updated: 16 Oct 2015
- views: 66046
- published: 16 Oct 2015
- views: 66046
Lathe Centering Tool
- Order: Reorder
- Duration: 4:17
- Updated: 30 Jun 2015
- views: 71384
In this video a build a really simple tool for centering parts on a lathe.
In this video a build a really simple tool for centering parts on a lathe.
wn.com/Lathe Centering Tool
In this video a build a really simple tool for centering parts on a lathe.
- published: 30 Jun 2015
- views: 71384
Lathe Tool Grinding Part 1
- Order: Reorder
- Duration: 31:45
- Updated: 22 Mar 2013
- views: 137114
My take on grinding HSS lathe tools. The forms of tools and angles discussed may not be what is shown in books but they work well for me and make grinding much...
My take on grinding HSS lathe tools. The forms of tools and angles discussed may not be what is shown in books but they work well for me and make grinding much simpler.
wn.com/Lathe Tool Grinding Part 1
My take on grinding HSS lathe tools. The forms of tools and angles discussed may not be what is shown in books but they work well for me and make grinding much simpler.
- published: 22 Mar 2013
- views: 137114
Grinding Turning and Facing Tools for the Lathe
- Order: Reorder
- Duration: 23:44
- Updated: 21 Oct 2013
- views: 78529
In this video I discuss cutter geometry of the turning and facing tool for the lathe and do a demonstration on how to grind them.
In this video I discuss cutter geometry of the turning and facing tool for the lathe and do a demonstration on how to grind them.
wn.com/Grinding Turning And Facing Tools For The Lathe
In this video I discuss cutter geometry of the turning and facing tool for the lathe and do a demonstration on how to grind them.
- published: 21 Oct 2013
- views: 78529
Grinding HSS Lathe Tools - Part 1: Grinding a RH Tool
- Order: Reorder
- Duration: 8:59
- Updated: 06 Oct 2012
- views: 90444
In part 1 of this three-part series on grinding HSS lathe tools Barry Young of Bates Technical College in Tacoma WA walks us through the process of grinding a r...
In part 1 of this three-part series on grinding HSS lathe tools Barry Young of Bates Technical College in Tacoma WA walks us through the process of grinding a right hand lathe tool.
Barry uses a mild steel blank (instead of HSS) for demonstration purposes as it grinds much faster. When practicing it is a good idea for you to also start with mild steel. After you have successfully created a few tools from mild steel, try a HSS blank. This will save you time and perhaps more importantly, money. HSS tool blanks are much more expensive than a chunk of mild steel, and they will also put more wear on your grinding wheel while you're learning and making mistakes than a mild steel blank will.
Be safe, be patient, and be persistent. Grinding your own tools can be rewarding and fun ... once you get the hang of it. For more tips and tutorials (including how to sharpen drill bits by hand) visit the rest of the videos on this channel, subscribe, and don't forget to visit our website.
Thanks for watching!
wn.com/Grinding Hss Lathe Tools Part 1 Grinding A Rh Tool
In part 1 of this three-part series on grinding HSS lathe tools Barry Young of Bates Technical College in Tacoma WA walks us through the process of grinding a right hand lathe tool.
Barry uses a mild steel blank (instead of HSS) for demonstration purposes as it grinds much faster. When practicing it is a good idea for you to also start with mild steel. After you have successfully created a few tools from mild steel, try a HSS blank. This will save you time and perhaps more importantly, money. HSS tool blanks are much more expensive than a chunk of mild steel, and they will also put more wear on your grinding wheel while you're learning and making mistakes than a mild steel blank will.
Be safe, be patient, and be persistent. Grinding your own tools can be rewarding and fun ... once you get the hang of it. For more tips and tutorials (including how to sharpen drill bits by hand) visit the rest of the videos on this channel, subscribe, and don't forget to visit our website.
Thanks for watching!
- published: 06 Oct 2012
- views: 90444
How to make a Tool Handle on a Wood Lathe
- Order: Reorder
- Duration: 3:59
- Updated: 26 Nov 2014
- views: 7686
Many quality tools these days come without a handle. This helps reduce the cost and allows you to make a handle that is customized for you; plus they are fun t...
Many quality tools these days come without a handle. This helps reduce the cost and allows you to make a handle that is customized for you; plus they are fun to make! This video demonstrates how to make your own wooden lathe tool handle.
wn.com/How To Make A Tool Handle On A Wood Lathe
Many quality tools these days come without a handle. This helps reduce the cost and allows you to make a handle that is customized for you; plus they are fun to make! This video demonstrates how to make your own wooden lathe tool handle.
- published: 26 Nov 2014
- views: 7686
LQ#006 Positioning lathe tool cutting edges, MARC LECUYER
- Order: Reorder
- Duration: 14:25
- Updated: 04 Feb 2014
- views: 17422
Sixth of my "Little Quickie" videos. I produce these shorter than usual videos to answer viewer questions about machining. As for all thatlazymachinist videos, ...
Sixth of my "Little Quickie" videos. I produce these shorter than usual videos to answer viewer questions about machining. As for all thatlazymachinist videos, this video is aimed at the novice machinist who wishes to develop proper basic work skills. More specifically, this video answers Alain, Mark and Jacky's question about how to position their tools cutting edges for lathe work. MARC LECUYER, thatlazymachinist.com
wn.com/Lq 006 Positioning Lathe Tool Cutting Edges, Marc Lecuyer
Sixth of my "Little Quickie" videos. I produce these shorter than usual videos to answer viewer questions about machining. As for all thatlazymachinist videos, this video is aimed at the novice machinist who wishes to develop proper basic work skills. More specifically, this video answers Alain, Mark and Jacky's question about how to position their tools cutting edges for lathe work. MARC LECUYER, thatlazymachinist.com
- published: 04 Feb 2014
- views: 17422
Woodturning a lathe tool handle using carbide tools
- Order: Reorder
- Duration: 12:16
- Updated: 04 Sep 2014
- views: 10667
In which I turn a tool handle FOR a carbide tool, USING carbide tools.
In which I turn a tool handle FOR a carbide tool, USING carbide tools.
wn.com/Woodturning A Lathe Tool Handle Using Carbide Tools
In which I turn a tool handle FOR a carbide tool, USING carbide tools.
- published: 04 Sep 2014
- views: 10667
Understanding a Starter Set of Lathe Chisels | Woodworkers Guild of America
- Order: Reorder
- Duration: 10:17
- Updated: 15 Dec 2014
- views: 42960
Are you ready to buy your first set of lathe chisels? Do you need a gouge, scraper, or parting tool? Or all of the above? Here’s some great buying advice that w...
Are you ready to buy your first set of lathe chisels? Do you need a gouge, scraper, or parting tool? Or all of the above? Here’s some great buying advice that will help you choose your chisels. In addition to learning what chisels you need, you’ll see how the chisels are used.
wn.com/Understanding A Starter Set Of Lathe Chisels | Woodworkers Guild Of America
Are you ready to buy your first set of lathe chisels? Do you need a gouge, scraper, or parting tool? Or all of the above? Here’s some great buying advice that will help you choose your chisels. In addition to learning what chisels you need, you’ll see how the chisels are used.
- published: 15 Dec 2014
- views: 42960
TOOL BIT GRINDING #1 South Bend Atlas Lathe tubalcain
- Order: Reorder
- Duration: 10:46
- Updated: 09 Oct 2009
- views: 136117
To access a complete listing of all my shop videos-- click on this link.
http://www.neme-s.org/Tubalcain/machine_shop_tips.htm
Here's how to grind a right hand ...
To access a complete listing of all my shop videos-- click on this link.
http://www.neme-s.org/Tubalcain/machine_shop_tips.htm
Here's how to grind a right hand turning tool for your metalworking lathe.
wn.com/Tool Bit Grinding 1 South Bend Atlas Lathe Tubalcain
back
- Playlist
- Chat
back
- Playlist
- Chat
26:56
Cutting Tool Geometries Lathe and Mill SME
published: 16 Oct 2015
Cutting Tool Geometries Lathe and Mill SME
Cutting Tool Geometries Lathe and Mill SME
- Report rights infringement
- published: 16 Oct 2015
- views: 66046
4:17
Lathe Centering Tool
In this video a build a really simple tool for centering parts on a lathe.
published: 30 Jun 2015
Lathe Centering Tool
Lathe Centering Tool
- Report rights infringement
- published: 30 Jun 2015
- views: 71384
31:45
Lathe Tool Grinding Part 1
My take on grinding HSS lathe tools. The forms of tools and angles discussed may not be w...
published: 22 Mar 2013
Lathe Tool Grinding Part 1
Lathe Tool Grinding Part 1
- Report rights infringement
- published: 22 Mar 2013
- views: 137114
23:44
Grinding Turning and Facing Tools for the Lathe
In this video I discuss cutter geometry of the turning and facing tool for the lathe and d...
published: 21 Oct 2013
Grinding Turning and Facing Tools for the Lathe
Grinding Turning and Facing Tools for the Lathe
- Report rights infringement
- published: 21 Oct 2013
- views: 78529
8:59
Grinding HSS Lathe Tools - Part 1: Grinding a RH Tool
In part 1 of this three-part series on grinding HSS lathe tools Barry Young of Bates Techn...
published: 06 Oct 2012
Grinding HSS Lathe Tools - Part 1: Grinding a RH Tool
Grinding HSS Lathe Tools - Part 1: Grinding a RH Tool
- Report rights infringement
- published: 06 Oct 2012
- views: 90444
3:59
How to make a Tool Handle on a Wood Lathe
Many quality tools these days come without a handle. This helps reduce the cost and allow...
published: 26 Nov 2014
How to make a Tool Handle on a Wood Lathe
How to make a Tool Handle on a Wood Lathe
- Report rights infringement
- published: 26 Nov 2014
- views: 7686
14:25
LQ#006 Positioning lathe tool cutting edges, MARC LECUYER
Sixth of my "Little Quickie" videos. I produce these shorter than usual videos to answer v...
published: 04 Feb 2014
LQ#006 Positioning lathe tool cutting edges, MARC LECUYER
LQ#006 Positioning lathe tool cutting edges, MARC LECUYER
- Report rights infringement
- published: 04 Feb 2014
- views: 17422
12:16
Woodturning a lathe tool handle using carbide tools
In which I turn a tool handle FOR a carbide tool, USING carbide tools.
published: 04 Sep 2014
Woodturning a lathe tool handle using carbide tools
Woodturning a lathe tool handle using carbide tools
- Report rights infringement
- published: 04 Sep 2014
- views: 10667
10:17
Understanding a Starter Set of Lathe Chisels | Woodworkers Guild of America
Are you ready to buy your first set of lathe chisels? Do you need a gouge, scraper, or par...
published: 15 Dec 2014
Understanding a Starter Set of Lathe Chisels | Woodworkers Guild of America
Understanding a Starter Set of Lathe Chisels | Woodworkers Guild of America
- Report rights infringement
- published: 15 Dec 2014
- views: 42960
10:46
TOOL BIT GRINDING #1 South Bend Atlas Lathe tubalcain
To access a complete listing of all my shop videos-- click on this link.
http://www.neme-s...
published: 09 Oct 2009
TOOL BIT GRINDING #1 South Bend Atlas Lathe tubalcain
TOOL BIT GRINDING #1 South Bend Atlas Lathe tubalcain
- Report rights infringement
- published: 09 Oct 2009
- views: 136117
Cutting Tool Geometries Lathe and Mill SME...
Lathe Centering Tool...
Lathe Tool Grinding Part 1...
Grinding Turning and Facing Tools for the Lathe...
Grinding HSS Lathe Tools - Part 1: Grinding a RH T...
How to make a Tool Handle on a Wood Lathe...
LQ#006 Positioning lathe tool cutting edges, MARC ...
Woodturning a lathe tool handle using carbide tool...
Understanding a Starter Set of Lathe Chisels | W...
TOOL BIT GRINDING #1 South Bend Atlas Lathe tubalc...
back
[VIDEO]: Discovery Of Ancient Sea Monster Skeleton Has Paleontologists Excited
Edit WorldNews.com 16 Oct 2016
The skeleton of an ancient sea monster discovered more than 50 years ago in Scotland has paleontologists excited over the quantity of bones found and anxious to learn more about the reptile, VOA reported Sunday. Using modern fossil extraction methods, the bones of the sea monster was able to be removed from hard rock. The previously unknown reptile lived in the oceans during the time of the dinosaurs, the report said ... ....
back
Putin Hopeful Russia-U.S. Ties Can Be Restored After Elections
Edit Bloomberg 16 Oct 2016
Russia hopes its ties with the U.S. can be restored after elections regardless of who wins, according to President Vladimir Putin. While Democrat Hillary Clinton so far is aggressive toward Russia and Republican Donald Trump wants cooperation, the Kremlin is not ruling out the possibility that the candidates’ positions will change when one of them becomes the U.S ... 16. Photographer ... ....
back
Battling horror of ISIS: Iraq's bloody crisis up close
Edit CNN 16 Oct 2016
(CNN)Thousands dead. Millions more driven from their homes. A future far from certain. This is the situation in Iraq today. The deep-rooted sectarian divide that resurfaced amid the chaos of Saddam Hussein's downfall created a security vacuum that ultimately allowed extremist militant groups like ISIS to flourish. READ MORE. High stakes for Iraq's future ... Read More. CNN looks at Iraq's bloody crisis up close.. THE CRISIS IN NUMBERS ... Replay....
back
Donald Trump Claims Election Will Be Rigged at Polling Sites
Edit Time Magazine 16 Oct 2016
Donald Trump refuses to back down from his claim, which has been made without specific evidence, that the upcoming election results will be rigged at polling places. The Republican nominee for president tweeted on Sunday that the election was being rigged at polling places, just hours after his running mate Gov ... — Donald J. Trump (@realDonaldTrump) October 16, 2016....
back
Moving beyond the solar system to exoplanets
Edit The Hindu 16 Oct 2016
Ever since the first exoplanet (51 Pegasi b) was discovered in 1995 by Michael Mayor and Didier Queloz, there has been renewed activity and interest in this field. The Kepler and K2 missions of NASA have identified thousands of planet candidates. Now there are nearly 5,000 planet candidates, and of these, some 3,397 have been confirmed as planets, according to the NASA exoplanet archive ... This unit began taking data in 2012 ... ....
Illegal DIY Weaponry More And More Common Along West Bank, Sparks Raids By Israeli Forces
Edit Inquisitr 16 Oct 2016
Israeli troops, approximately 150 in number, that include special-forces operatives, began searching the town on Azzuri in the West Bank by way of armored vehicles to attempt to uncover guns and those who make them. Their mission was a success as they found what they went for ... His drill presses and lathes were muscled out of the shop, dragged by a crane and hauled away by the Israeli army ... Roi Sheetrit, Efrain Brigade commander....
10 tiny churches around the UK
Edit The Guardian 16 Oct 2016
Dixe Wills set off on a pilgrimage round Britain in search of diminutive places of worship. Here he picks 10 of the most unusual, from a chapel built by prisoners of war in the Orkneys to a plywood labour of love in a Norfolk garden. St Thomas à Becket, Fairfield, Kent ... By rights, it shouldn’t be here at all ... Thus a small lath-and-plaster structure was first thrown up on this spot at some time around 1200. The Italian Chapel, Orkney ... ....
Series lets you follow Monica Potter’s renovation of her Cleveland home — Mary Beth Breckenridge
Edit Akron Beacon Journal 15 Oct 2016
I’ve been dying to see inside the house actress Monica Potter renovated in Cleveland. And boy, was it worth the wait. This week, HGTV started airing a series about the renovation, Welcome Back Potter ... (Did you miss it? The first two episodes will be repeated this weekend, starting at 1 and 1.30 p.m. Saturday ... Tuesday.) ... “We’re Irish women from Cleveland,” she says as she knocks down a plaster-and-lath wall ... ....
Kuedo
Edit The Quietus 14 Oct 2016
In hindsight, Vex’d’s seminal 2005 dubstep masterpiece Degenerate was already an attempt to look past the genre’s established aesthetic and avoid it becoming stale, with its aggressive bass charges and rattling beats presenting a dystopian, futuristic form of bass music that felt abrasive and vital even so early on in dubstep’s history ... He then closes the album with ‘Lathe’, perhaps the most superficially dubstep track on the album. ....
Engineering made fun for school students
Edit The Hindu 13 Oct 2016
For C. Ramanathan, a Class VIII student of the Chennai Middle School in Aminjikarai, it was a fascinating experience to see how people worked with metal and wood in workshops using tools such as lathe machines ... The staff of the Central Workshop at IIT-M began the programme for school students around two years back ... Thiruppathi, Technical Superintendent and Coordinator, Electrical Shop, Central Workshop ... Thiruppathi ... S ... ....
Enterprises in Yinzhou District bloom (Ningbo Municipal Government)
Edit Public Technologies 12 Oct 2016
(Source. Ningbo Municipal Government) ... As the leading district in the transformation development of the manufacturing industry in Ningbo, Yinzhou District boasts a solid economic foundation ... Fortunately, the fund hasn't been used since its launching ... At the workshops of Ningbo Fushi Auto Parts Co. Ltd., 300 CNC lathes make it possible to complete the whole process of production and packaging by robotic arms ... (noodl. 35774692) ....
He built Titanic model, put in yard to honor Minnesota survivor of sinking
Edit Pioneer Press 12 Oct 2016
PROCTOR, Minn. — It’s safe to say the Titanic is one of Braden Barker’s favorite things. The 5-year-old from Superior, Wis., asked his mother, Kelli Barker, to take a special trip to Proctor on Tuesday afternoon to visit a model of the Titanic on display in a yard ... Seguin built the replica over 2.5 years. (Forum News Service ... The lath wood used for the ship’s deck is one of the only things he bought for the project, he said ... ....
What's it like being an Apprentice Technician? (University of Bath)
Edit Public Technologies 11 Oct 2016
(Source. University of Bath). Emma Walker, former Apprentice Mechanical Engineering Technician, has been nominated to receive the Building Services Construction & Engineering Work Place Learner of the Year Award ... Emma writes about how she came to the University and what she has achieved here. ... I've learned how to use machinery such as mills and lathes, laser cutters, and 3D printers. I also passed my forklift licence ... (noodl. 35757996) ....
TCAT Memphis and Bartlett High School Announce Partnership Providing Early College Credit in Machine Tool Technology (State of Tennessee)
Edit Public Technologies 10 Oct 2016
(Source. State of Tennessee). Monday, October 10, 2016 . 1.49pm. FOR IMMEDIATE RELEASE. News Release. Media contact. Kate Derrick. kate.derrick@tn.gov. 615-532-0428 ... The lab will specifically focus on developing skills to meet the demands of employers in West Tennessee. Students will receive training on equipment such as lathes and mills, including how to use and program the machines for professional purposes ... Event Information. What ... Where ... When....
NJ CAR Safety Tip- Personal Protective Equipment (NJCAR - New Jersey Coalition of Automotive Retailers Inc)
Edit Public Technologies 10 Oct 2016
(Source. NJCAR - New Jersey Coalition of Automotive Retailers Inc). NJ CAR is committed to helping dealers develop a workplace safety culture that becomes second nature. Don't wait until an accident happens to focus on safety. You can reduce the chance of injury and protect your bottom line with simple, common-sense changes ... EYEWEAR SAFETY. Types ... Eye Protection is required when.. • Working under a vehicle ... • Working on brake jobs or lathing....
'The people's house': Gala celebrates 100th anniversary of Capitol's dedication
Edit Deseret News 09 Oct 2016
SALT LAKE CITY — The sun dipped low on an unseasonably warm October day as men in tailcoats and women in period dresses milled around the rotunda of Utah Capitol, chatting underneath the warm light of the chandeliers and cheerful sashes of red, white and blue ... One hundred years and one day ago, she said, thousands of Utahns flocked to the massive state Capitol to celebrate its dedication ... Gov ... "There's not a lathe left in the U.S....
Channapatna dolls continue to charm buyers
Edit The Hindu 08 Oct 2016
No Dasara is complete without Gombe Habba, the festival of dolls ... And this season, handcrafted Channapatna wooden dolls are in demand, especially among non-resident Indians ... “There are merely 200 artisans who practise the traditional lathe making and use original lacquer-ware, a craft that is protected as a geographical indication,” said designer Atul Johri, who is based out of Channapatna and works with local artists ... ....
Gemma Tipton: Creativity needs to be given room to breathe
Edit The Irish Times 08 Oct 2016
I used to have a fridge magnet, or maybe it was a T-shirt, or was it a poster? I can’t remember the medium any more, but I can definitely remember the message. there was a picture of a woman, pop-art style, clutching her forehead and looking anguished. “Oh no,” read the thought bubble, “I forgot to be creative.” ... Challenges ... Ideas need space and time to become art works ... A wood turner may get stuck for want of a lathe ... ADVERTISEMENT ... ....
- 1
- 2
- 3
- 4
- 5
- Next page »
