The FlexGripKit a unique modular system which consists primarily of 2 components: BasePlate and Legs. It is a universal tool for multi-purpose use and can be extended according to your needs. Get big already with the standard kit! The BasePlate features a bubble level as well as versatile holes and threads for various purposes. All legs are identical and can be extended to your requirement. They have a flexible ratchet to cover different angles, made for difficult setups. Each leg can except a seat or any kind of accessories (e. g. lamp). No Limit – Just Creativity! The FlexGripKit covers following product categories: • Table Dolly (linear, curve + freestyle) • LowBoy / HiHat • Bazooka Base (3-12 legs) • Camera Base • Rigging System (tubes 33-50mm) • Slider (on ground or tripod) • Tracking Dolly (36 + 62cm) • Doorway Dolly (with Tire Set and steering) Table Dolly The special thing about the Table Dolly is the WheelBall, which allows not only curved and linear movements, but also „freestyle“ shots. LowBoy / HiHat The LowBoy / HiHat can be equipped with 75 – 150mm bowl or with a Mitchell Plate. Levelling feet can be placed directly to the BasePlate or for bigger footprint, to extention legs. The internal bubble level always keeps you safe! Bazooka Base It can be set up with 3 or more (up to 12) legs. The flexible design with the ratchet makes tuff situations easy. High payload capacity of up to 250kg (550lbs) is achieved due to strong, high grade aluminium. The FlexGripKit becomes a Studio Dolly if used with studio wheels. Camera Base In combination with a rotating seat, the FlexGripKit becomes a Camera Base for e. g. sport events. Rigging System Using the same ratchet connection of the legs, the clamp is ready to be used for scaffold mounting or rigging. This clamp is designed to hold all tubes with diameters from 33mm to 50mm and can be rotated in two axis. Slider Normally, sliders are limited by the length of their rail. Not with the FlexGripKit! You decide the lenght due to a railsystem which can be extended to your needs. It can also be combined with curved rails. A high grade aluminium tube wheighs only 1,9kg (4lbs) and has a length of 1,5m. Special length upon request. The FlexGripKit slider can be operated on 36cm or 62cm gauge. Smooth and silent sliding is guaranteed by using high quality bearings, and an offset positioning of the rubber counted wheels. Levelling is easy by means of levelling feet if layed down the floor or by simply adjusting the height of the stand if mounted on a higher level. Tracking Dolly You can convert the FlexGripKit to a Tracking Dolly by adding 4 identical platforms. High payload capacity of up to 250kg (550lbs) enables to ride the cameraman and assistant. The standard track gauge of 62cm allows this Tracking Dolly to ride on all common tracks which are standard around the world. As an option economical and compat rubber tracks are available. Doorway Dolly A further modification would be an upgrade with a tire set. Wheighing less than 19kg (42lbs) this Doorway Dolly gives you the freedom you need! Supreme operation is achieved by using the electrical driven P1 column. Get more information of P1 Dolly System in its corresponding Flyer or here. Transport Measurements of the small transport case is 66 x 49 x 21 cm (26 x 19 x 8“) and weighs only 7,5kg(17lbs.) Don’t Wait – Start Right Now! The FlexGripKit Standard version consists of: 1x BasePlate 1x Screw 1x Euro Mount 2x Clamp 3x Levelling foot 4x Distance bolt 8x Leg