Blow Molding Process
- Order:
- Duration: 3:38
- Published: 14 Oct 2009
- Uploaded: 10 Mar 2011
- Author: MrLemongreen
This video is to showing secondary school students the basic concept and techniqe of blow molding.
- casting
- ceramic
- Compaction
- Compression molding
- Extrusion molding
- Foam molding
- glass
- Injection molding
- Laminating
- manufacturing
- Matched mold
- metal
- moldmaker
- Pattern (casting)
- plastic
- release agent
- Rotational molding
- Rotomolding
- Sand casting
- sintering
- Thermoforming
- Transfer molding
- Vacuum forming
Injection Molding Basics - Process (excerpt)
- Order: Reorder
- Duration: 1:59
- Published: 08 Mar 2009
- Uploaded: 02 Apr 2011
- Author: traininteractive
This excerpt discusses Material Preparation and handling of plastics, including mixing of plastic material and additives (such as impact modifiers, fillers, flame retardants, mold release agents, plasticizers, reinforcements, heat stabilizers, lubricants and colorants), using dessicant dryers for material drying and dew meters for evaluating the moisture content of a plastic material. Our Injection Molding Basics series provides participants with a general understanding of the three major aspects of injection molding; the injection molding machine, the molding process, and the injection mold. These programs use 3D animation to demonstrate the inner workings of the machine and mold and to easily convey otherwise complex concepts. Important safety precautions are stressed throughout these training programs. A. Routsis Associates - Complete Training Solutions for the Plastics Industry. Visit www.traininteractive.com for state-of-art plastics training, including interactive CD-ROM and online training.
Introduction to Injection Molding - The Molding Process (excerpt)
- Order: Reorder
- Duration: 0:50
- Published: 08 Mar 2009
- Uploaded: 21 Mar 2011
- Author: traininteractive
- http://wn.com/Introduction_to_Injection_Molding__The_Molding_Process_excerpt
- Email this video
- Sms this video
This excerpt illustrates the injection molding process with 3D animation showing how the reciprocating screw injection molding machine melts, injects, fills the closed injection mold, cools the plastic and ejects the plastic parts from the mold. This course provides participants with a general introduction to the plastics industry. The primary focus of this training program is the day-to-day operations of a typical injection molding facility. An Introduction to Injection Molding was created for newcomers to the injection molding industry or anyone that would like to learn more about plastics. A. Routsis Associates - Complete Training Solutions for the Plastics Industry. Visit www.traininteractive.com for state-of-art plastics training, including interactive CD-ROM and online training.
HPC 2 Shot Molding Process Part 1 *
- Order: Reorder
- Duration: 2:58
- Published: 20 Apr 2009
- Uploaded: 27 Aug 2010
- Author: hansenplastics
Molding Process
- Order: Reorder
- Duration: 0:14
- Published: 13 Oct 2006
- Uploaded: 24 Apr 2011
- Author: username7800
One of the first steps is to make a form. Here expanding foam is used to fill a form.
Establishing an Injection Molding Process (excerpt)
- Order: Reorder
- Duration: 1:09
- Published: 14 Apr 2010
- Uploaded: 27 Aug 2010
- Author: traininteractive
This program shows participants how to quickly and effectively establish an injection molding process. Important safety issues associated with process set-up are stressed throughout the course. This program will also help molders reduce set-up and cycle times. Material preparation, drying and mixing Screw and barrel cleaning Guidelines for setting each processing parameter Procedures for proper injection velocity profile set-up Proper clamp and part removal settings
The Multishot Injection Molding Process
Video illustration of multishot injection molding process with rotary platen mold. Also called two shot or 2 shot plastic injection molding. What is the multishot process? Multishot injection molding is the process of bonding two different materials into one integrated part in one manufacturing process. How does this process work? Multishot injection molding machines have two independent barrels that have their own set of inputs. In the machine is a rotary platen mold. This type of mold has two sets of cavities that rotate and fill in sequence with two unique resins. During every molding cycle, one set of cavities are injected with the first shot of material to form the substrate of the part, while the other set of cavities receives the second material, or second shot, over the substrate. Between cycles, the mold opens and rotates holding the set of first shot parts during rotation so that they are positioned accurately for the second shot. Before the mold closes, the completed parts are removed. The now empty cavities are ready for the next molding cycle.
PAPER PULP MOULDED PRODUCTS (DRY MOULDING PROCESS)
PULP MOULDED PRODUCTS CAN BE MANUFACTURED USING DRY MOULDING PROCESS ALSO. THIS PROCESS IS MAINLY USED FOR MAKING EGG BOXES, PAPER PLATES, CONSUMER RELATED GOODS, INDUSTRIAL PACKING MATERIALS ETC. THIS NEEDS LESS SPACE, LESS INVESTMENT, LESS PROCESS TIME ETC. THE END PRODUCTS WILL HAVE EXCELLENT PRODUCT FINISH AND CLOSE DIMENSIONAL ACCURACY ETC.
Builders Brass molding process
- Order: Reorder
- Duration: 5:08
- Published: 27 Jun 2009
- Uploaded: 25 Aug 2010
- Author: isidrofloresm2003
Green sand molding process at Builders Brass; Bronze and Aluminum foundry located at Tijuana, Mexico. By Isidro Flores
Injection Molding Process ( LG - 42LE550 )
Paulson Training - Statistical Process Control (SPC)
- Order: Reorder
- Duration: 1:47
- Published: 12 Feb 2010
- Uploaded: 03 May 2011
- Author: PaulsonTraining
This video is an excerpt from our Statistical Process Control Course. This course, specifically designed for plastic processors, will assure that production floor personnel understand and can apply basic SPC concepts on the production floor. The training focuses on increasing SPC skills, maintaining correct SPC procedures, and documenting and training new personnel in SPC requirements. Paulson Training Programs - Complete Training Solutions for the Plastics Industry. Visit www.paulsontraining.com for state-of-art plastics training, including interactive CD-ROM and online training.
ACS/Etymotic Custom Fit earphone moulding process
Shot with a 5D mkII - www.expertreviews.co.uk
Buck Company Cope & Drag Molding Process
- Order: Reorder
- Duration: 3:32
- Published: 05 Jun 2009
- Uploaded: 27 Aug 2010
- Author: BuckCompany
Ductile Cope & Drag Molding Process Buck Company Quarryville, PA.
Part 1 - 10 Procedures to Fine-Tune Any Plastic Molding Process
- Order: Reorder
- Duration: 9:46
- Published: 23 Apr 2009
- Uploaded: 11 Dec 2010
- Author: traininteractive
- http://wn.com/Part_1__10_Procedures_to_Fine-Tune_Any_Plastic_Molding_Process
- Email this video
- Sms this video
Join Andy Routsis, founder and president of A. Routsis Associates, as he presents many aspects the typical injection molder overlooks. When optimizing the injection molding process, many injection molders stop their efforts after adjusting a few parameters such as cooling time. Andy will focus on often overlooked concepts such as the proper use of injection profiling, appropriate cushion sizing, and material preparation. This seminar can benefit any engineer, processor, supervisor, technician, or die setter as well as anyone involved in managing a molding operation.
Armstrong Mold- RIM Reaction Injection Molding Process
- Order: Reorder
- Duration: 1:36
- Published: 29 Oct 2009
- Uploaded: 02 Dec 2010
- Author: ArmstrongMold
Reaction Injection Molded Polyurethane process as preformed at Armstrong Mold in East Syracuse, NY www.armstrongmold.com
Part 2 - 10 Procedures to Fine-Tune Any Plastic Molding Process
- Order: Reorder
- Duration: 7:28
- Published: 23 Apr 2009
- Uploaded: 26 Aug 2010
- Author: traininteractive
- http://wn.com/Part_2__10_Procedures_to_Fine-Tune_Any_Plastic_Molding_Process
- Email this video
- Sms this video
Join Andy Routsis, founder and president of A. Routsis Associates, as he presents many aspects the typical injection molder overlooks. When optimizing the injection molding process, many injection molders stop their efforts after adjusting a few parameters such as cooling time. Andy will focus on often overlooked concepts such as the proper use of injection profiling, appropriate cushion sizing, and material preparation. This seminar can benefit any engineer, processor, supervisor, technician, or die setter as well as anyone involved in managing a molding operation.
HPC 2 Shot Molding Process, part 2 *
- Order: Reorder
- Duration: 1:06
- Published: 16 Mar 2009
- Uploaded: 26 Aug 2010
- Author: hansenplastics
Establishing a Scientific Molding Process
- Order: Reorder
- Duration: 1:26
- Published: 28 Oct 2010
- Uploaded: 28 Oct 2010
- Author: traininteractive
This course provides participants with in-depth processing information to better prepare them for making appropriate and cost-effective decisions when establishing or improving a scientific injection molding process. Course topics include: General Rules for Scientific Processing Process Optimization Strategies: · 1st Stage Filling · 1st Stage to 2nd Stage Transfer · 2nd Stage Pack · Screw Delay · Screw Recovery · Screw Decompression · Cooling Time · Mold Opening · Part Ejection · Mold Closing · Clamping
Injection Molding Basics - Machine (excerpt)
- Order: Reorder
- Duration: 1:58
- Published: 08 Mar 2009
- Uploaded: 09 Apr 2011
- Author: traininteractive
This excerpt discusses the Modes of Operation of the injection molding machine: manual mode (including set-up or mold set option), semi-automatic mode and automatic mode. Our Injection Molding Basics series provides participants with a general understanding of the three major aspects of injection molding; the injection molding machine, the molding process, and the injection mold. These programs use 3D animation to demonstrate the inner workings of the machine and mold and to easily convey otherwise complex concepts. Important safety precautions are stressed throughout these training programs. A. Routsis Associates - Complete Training Solutions for the Plastics Industry. Visit www.traininteractive.com for state-of-art plastics training, including interactive CD-ROM and online training.
Powder Coating Process - Injection Molding
- Order: Reorder
- Duration: 5:56
- Published: 17 Aug 2009
- Uploaded: 10 Jan 2011
- Author: controlplastics
www.controlplastics.com - Powder coating process - Contact us for all your manufacturing needs, see our website for all our capabilities, contact us with any questions you may have and we'll be glad to give you a quote on your next project.
RJG's DECOUPLED MOLDING (SM) - Barrel Temperature (excerpt)
- Order: Reorder
- Duration: 1:27
- Published: 11 Mar 2009
- Uploaded: 27 Aug 2010
- Author: traininteractive
- http://wn.com/RJG's_DECOUPLED_MOLDING_SM__Barrel_Temperature_excerpt
- Email this video
- Sms this video
This excerpt discusses barrel temperature and its importance in establishing and maintaining a reliable process. Includes a discussion of The "30/30" method. These courses convey many of the concepts and theories covered within the RJG DECOUPLED MOLDING (SM) training seminars. This four part series starts with the major components of the molding process, and progresses to systematic troubleshooting. The DECOUPLED MOLDING (SM) system is an ideal processing method intended for anyone interested in optimizing an injection molding process. A. Routsis Associates - Complete Training Solutions for the Plastics Industry. Visit www.traininteractive.com for state-of-art plastics training, including interactive CD-ROM and online training.
DECOUPLED MOLDING(SM) for Process Capability - Part 1
Art Schubert Chief Engineer at RJG presents his findings on different injection molding control strategies. This presentation was originally given at Antec/NPE 2009.
Paulson Training - Design of Experiements (DOE) for Injection Molding
- Order: Reorder
- Duration: 2:02
- Published: 11 Feb 2010
- Uploaded: 27 Aug 2010
- Author: PaulsonTraining
- http://wn.com/Paulson_Training__Design_of_Experiements_DOE_for_Injection_Molding
- Email this video
- Sms this video
This video is an excerpt from our Design of Experiements (DOE) for Injection Molding course. Solve molding problems faster and develop the most efficient process window for any molding process. - Provides an overview of how to design an experiment - Explores various DOE techniques - Explains how to collect and analyze the data using real-world molding examples - Analyzes how data is used to characterize, optimize and troubleshoot an injection molding process - Explains common DOE terminology Paulson Training Programs - Complete Training Solutions for the Plastics Industry. Visit www.paulsontraining.com for state-of-art plastics training, including interactive CD-ROM and online training.
photo: Creative Commons
Movable metal type, and composing stick, descended from Gutenberg's press.
photo: Creative Commons
"Modern Book Printing" − sculpture commemorating its inventor Gutenberg
photo: Creative Commons / Michael Gäbler
Petrified wood.
photo: Public Domain / Gaius Cornelius
One half of a bronze mold for casting a socketed spear head dated to the period 1400-1000 BC. There are no known parallels for this mold.
photo: Creative Commons / Nz aj
Macadamia Beaumont new growth
photo: Creative Commons
Brick making at the beginning of the 20th century
photo: Creative Commons / Graibeard
Paper clip mold opened in molding machine; the nozzle is visible at right
photo: Creative Commons
Cailletier cultivar near Contes, Alpes-Maritimes, with an olive harvest net on the ground
photo: AP / Madame Tussauds, HO
** ALTERNATIVER BILDAUSSCHNITT ** In this image made available by Madame Tussauds Wax Museum
photo: Creative Commons
Packaged nori
photo: Creative Commons
West face of Roskilde Cathedral in Roskilde, Denmark
photo: Creative Commons
Inscription on bell at Hōkō-ji
photo: Creative Commons / Balsa10
Jelly baby
photo: Creative Commons
The Old Castle
photo: Creative Commons
Figure following a Meissen model, about 1754, Bow Porcelain Factory (V&A; Museum no. C.144-1931)
photo: Creative Commons
View from Richard J. Daley Center three months before the hotel opened amid construction (14 September 2007)
photo: Creative Commons
Vučedol Dove, the symbol of the Vučedol culture
photo: Creative Commons
Cathedral of Reims, France
photo: Creative Commons
Colegio de San Ignacio de Loyola Vizcaínas
Most Popular
RELATED LINKS
- Blow molding
- casting
- ceramic
- Compaction
- Compression molding
- Extrusion molding
- Foam molding
- glass
- Injection molding
- Laminating
- manufacturing
- Matched mold
- metal
- moldmaker
- Pattern (casting)
- plastic
- release agent
- Rotational molding
- Rotomolding
- Sand casting
- sintering
- Thermoforming
- Transfer molding
- Vacuum forming
Processingtalk
NSK's bearing-substitution programme has produced large annual savings for a food processor operating a vegetable washer/polishing machine in harsh conditions with prevalent water, soil and grit. The food processor was encountering high failure rates on housed bearing units used on the vegetable washer, resulting in complete bearing changes every three months....
Processingtalk
Kistler has launched a Basic version of its Como Injection system to ensure minimum reject rates by monitoring and controlling in-cavity pressure in lower-volume injection moulding production. This latest version may be useful to moulders producing large, high-value items, such as car bumpers, where even a small proportion of rejects can...
Funds given to advance moulding process
09 Jan 2007
Manufacturing Talk
A moulding process that uses fluid-filled, balanced pressure, heated floating mold technology for composite materials will be modified with nano particles. The National Composite Center (NCC) announced it will receive operational funds from the State of Ohio, USA, to launch a programme that will fuse two key technologies to give aerospace and automotive manufacturers critical...
Moulding processes to be shown at Frenchevent
19 Sep 2006
Manufacturing Talk
All three major manufacturing processes - blow moulding, thermoforming and injection moulding - will be shown in France, including first commercially launched thermoformed packaging. The breadth of the RPC Group's manufacturing capabilities will be showcased at Emballage 2006, including a number of new developments All three major manufacturing processes - blow moulding,...
SofTech Inc - Seco/Carbaloy and SofTech Offer Process Optimization To The Mould and Die Industry
12 Sep 2000
Stockhouse
Business Editors INDIANAPOLIS--(BUSINESS WIRE)--Sept. 12, 2000--SofTech, Inc. (Nasdaq:SOFT) Seco Tools AB and SofTech announced today a worldwide co-marketing agreement. Seco Tools will use SofTech''s Prospector NC programming software exclusively to demonstrate and market their line of carbide cutting tool products. The agreement is mutually beneficial to both companies and...
Yahoo - Seco/Carbaloy and SofTech Offer Process Optimization To The Mould and Die Industry
12 Sep 2000
Yahoo Daily News
INDIANAPOLIS--(BUSINESS WIRE)--SofTech, Inc. (Nasdaq:SOFT - news) Seco Tools AB and SofTech announced today a worldwide co-marketing agreement. Seco Tools will use SofTech's Prospector NC programming software exclusively to demonstrate and market their line of carbide cutting tool products. The agreement is mutually beneficial to both companies and their customers and has a...
Molding (process)
Molding or moulding is the process of manufacturing by shaping pliable raw material using a rigid frame or model called a pattern.
A mold or mould is a hollowed-out block that is filled with a liquid like plastic, glass, metal, or ceramic raw materials. The liquid hardens or sets inside the mold, adopting its shape. A mold is the opposite of a cast. The manufacturer who makes the molds is called the moldmaker. A release agent is typically used to make removal of the hardened/set substance from the mold easier.
The terminology can depend on the application. Sand casting involves both a "pattern" (which is the positive-image model of the desired part) and a "mold" (which is the negative-image hole made by packing sand around the pattern).
Types of molding include:
This text is licensed under the Creative Commons CC-BY-SA License. This text was originally published on Wikipedia and was developed by the Wikipedia community.
