<meta property="og:image" content="http://www.lawyersgunsmoneyblog.com/wp-cont…
You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
if ((randValue == lastIndex) && (quotes.length > 1)) {
This message may appear in several cases:
if ((randValue == lastIndex) && (quotes.length > 1)) {
This message may appear in several cases:
…k/pages/dynamic.asp?page=staffdetails&id=dbrockington" TARGET="_blank">Website…
An entity reference was found in the document, but there is no reference by that name defined. Often this is caused by misspelling the reference name, unencoded ampersands, or by leaving off the trailing semicolon (;). The most common cause of this error is unencoded ampersands in URLs as described by the WDG in "Ampersands in URLs".
Entity references start with an ampersand (&) and end with a semicolon (;). If you want to use a literal ampersand in your document you must encode it as "&" (even inside URLs!). Be careful to end entity references with a semicolon or your entity reference may get interpreted in connection with the following text. Also keep in mind that named entity references are case-sensitive; &Aelig; and æ are different characters.
If this error appears in some markup generated by PHP's session handling code, this article has explanations and solutions to your problem.
Note that in most documents, errors related to entity references will trigger up to 5 separate messages from the Validator. Usually these will all disappear when the original problem is fixed.
…k/pages/dynamic.asp?page=staffdetails&id=dbrockington" TARGET="_blank">Website…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…pages/dynamic.asp?page=staffdetails&id=dbrockington" TARGET="_blank">Website</…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…pages/dynamic.asp?page=staffdetails&id=dbrockington" TARGET="_blank">Website</…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…pages/dynamic.asp?page=staffdetails&id=dbrockington" TARGET="_blank">Website</…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…uk/pages/dynamic.asp?page=staffdetails&id=dbrockington" TARGET="_blank">Websit…
…dynamic.asp?page=staffdetails&id=dbrockington" TARGET="_blank">Website</a></li>
You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
<ul></ul>
Most likely, you nested tags and closed them in the wrong order. For example <p><em>...</p> is not acceptable, as <em> must be closed before <p>. Acceptable nesting is: <p><em>...</em></p>
Another possibility is that you used an element which requires a child element that you did not include. Hence the parent element is "not finished", not complete. For instance, in HTML the <head> element must contain a <title> child element, lists require appropriate list items (<ul> and <ol> require <li>; <dl> requires <dt> and <dd>), and so on.
<ul></ul>
Most likely, you nested tags and closed them in the wrong order. For example <p><em>...</p> is not acceptable, as <em> must be closed before <p>. Acceptable nesting is: <p><em>...</em></p>
Another possibility is that you used an element which requires a child element that you did not include. Hence the parent element is "not finished", not complete. For instance, in HTML the <head> element must contain a <title> child element, lists require appropriate list items (<ul> and <ol> require <li>; <dl> requires <dt> and <dd>), and so on.
</ul>
Most likely, you nested tags and closed them in the wrong order. For example <p><em>...</p> is not acceptable, as <em> must be closed before <p>. Acceptable nesting is: <p><em>...</em></p>
Another possibility is that you used an element which requires a child element that you did not include. Hence the parent element is "not finished", not complete. For instance, in HTML the <head> element must contain a <title> child element, lists require appropriate list items (<ul> and <ol> require <li>; <dl> requires <dt> and <dd>), and so on.
</ul>
Most likely, you nested tags and closed them in the wrong order. For example <p><em>...</p> is not acceptable, as <em> must be closed before <p>. Acceptable nesting is: <p><em>...</em></p>
Another possibility is that you used an element which requires a child element that you did not include. Hence the parent element is "not finished", not complete. For instance, in HTML the <head> element must contain a <title> child element, lists require appropriate list items (<ul> and <ol> require <li>; <dl> requires <dt> and <dd>), and so on.
</ul>
Most likely, you nested tags and closed them in the wrong order. For example <p><em>...</p> is not acceptable, as <em> must be closed before <p>. Acceptable nesting is: <p><em>...</em></p>
Another possibility is that you used an element which requires a child element that you did not include. Hence the parent element is "not finished", not complete. For instance, in HTML the <head> element must contain a <title> child element, lists require appropriate list items (<ul> and <ol> require <li>; <dl> requires <dt> and <dd>), and so on.
</ul>
Most likely, you nested tags and closed them in the wrong order. For example <p><em>...</p> is not acceptable, as <em> must be closed before <p>. Acceptable nesting is: <p><em>...</em></p>
Another possibility is that you used an element which requires a child element that you did not include. Hence the parent element is "not finished", not complete. For instance, in HTML the <head> element must contain a <title> child element, lists require appropriate list items (<ul> and <ol> require <li>; <dl> requires <dt> and <dd>), and so on.
</div>
You may have neglected to close an element, or perhaps you meant to "self-close" an element, that is, ending it with "/>" instead of ">".
<li class="last-item">DJW
</div>
You may have neglected to close an element, or perhaps you meant to "self-close" an element, that is, ending it with "/>" instead of ">".
<ul class="clearfix">
…https://mail.google.com/mail/?view=cm&fs=1&to&su=Brian%20Leiter%27s%20slow-mot…
An entity reference was found in the document, but there is no reference by that name defined. Often this is caused by misspelling the reference name, unencoded ampersands, or by leaving off the trailing semicolon (;). The most common cause of this error is unencoded ampersands in URLs as described by the WDG in "Ampersands in URLs".
Entity references start with an ampersand (&) and end with a semicolon (;). If you want to use a literal ampersand in your document you must encode it as "&" (even inside URLs!). Be careful to end entity references with a semicolon or your entity reference may get interpreted in connection with the following text. Also keep in mind that named entity references are case-sensitive; &Aelig; and æ are different characters.
If this error appears in some markup generated by PHP's session handling code, this article has explanations and solutions to your problem.
Note that in most documents, errors related to entity references will trigger up to 5 separate messages from the Validator. Usually these will all disappear when the original problem is fixed.
…https://mail.google.com/mail/?view=cm&fs=1&to&su=Brian%20Leiter%27s%20slow-mot…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…tps://mail.google.com/mail/?view=cm&fs=1&to&su=Brian%20Leiter%27s%20slow-motio…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…tps://mail.google.com/mail/?view=cm&fs=1&to&su=Brian%20Leiter%27s%20slow-motio…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…tps://mail.google.com/mail/?view=cm&fs=1&to&su=Brian%20Leiter%27s%20slow-motio…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…"https://mail.google.com/mail/?view=cm&fs=1&to&su=Brian%20Leiter%27s%20slow-mo…
…://mail.google.com/mail/?view=cm&fs=1&to&su=Brian%20Leiter%27s%20slow-motion%2…
An entity reference was found in the document, but there is no reference by that name defined. Often this is caused by misspelling the reference name, unencoded ampersands, or by leaving off the trailing semicolon (;). The most common cause of this error is unencoded ampersands in URLs as described by the WDG in "Ampersands in URLs".
Entity references start with an ampersand (&) and end with a semicolon (;). If you want to use a literal ampersand in your document you must encode it as "&" (even inside URLs!). Be careful to end entity references with a semicolon or your entity reference may get interpreted in connection with the following text. Also keep in mind that named entity references are case-sensitive; &Aelig; and æ are different characters.
If this error appears in some markup generated by PHP's session handling code, this article has explanations and solutions to your problem.
Note that in most documents, errors related to entity references will trigger up to 5 separate messages from the Validator. Usually these will all disappear when the original problem is fixed.
…://mail.google.com/mail/?view=cm&fs=1&to&su=Brian%20Leiter%27s%20slow-motion%2…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…/mail.google.com/mail/?view=cm&fs=1&to&su=Brian%20Leiter%27s%20slow-motion%20c…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…/mail.google.com/mail/?view=cm&fs=1&to&su=Brian%20Leiter%27s%20slow-motion%20c…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…/mail.google.com/mail/?view=cm&fs=1&to&su=Brian%20Leiter%27s%20slow-motion%20c…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…s://mail.google.com/mail/?view=cm&fs=1&to&su=Brian%20Leiter%27s%20slow-motion%…
…mail.google.com/mail/?view=cm&fs=1&to&su=Brian%20Leiter%27s%20slow-motion%20ca…
An entity reference was found in the document, but there is no reference by that name defined. Often this is caused by misspelling the reference name, unencoded ampersands, or by leaving off the trailing semicolon (;). The most common cause of this error is unencoded ampersands in URLs as described by the WDG in "Ampersands in URLs".
Entity references start with an ampersand (&) and end with a semicolon (;). If you want to use a literal ampersand in your document you must encode it as "&" (even inside URLs!). Be careful to end entity references with a semicolon or your entity reference may get interpreted in connection with the following text. Also keep in mind that named entity references are case-sensitive; &Aelig; and æ are different characters.
If this error appears in some markup generated by PHP's session handling code, this article has explanations and solutions to your problem.
Note that in most documents, errors related to entity references will trigger up to 5 separate messages from the Validator. Usually these will all disappear when the original problem is fixed.
…mail.google.com/mail/?view=cm&fs=1&to&su=Brian%20Leiter%27s%20slow-motion%20ca…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…il.google.com/mail/?view=cm&fs=1&to&su=Brian%20Leiter%27s%20slow-motion%20car%…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…il.google.com/mail/?view=cm&fs=1&to&su=Brian%20Leiter%27s%20slow-motion%20car%…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…il.google.com/mail/?view=cm&fs=1&to&su=Brian%20Leiter%27s%20slow-motion%20car%…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…/mail.google.com/mail/?view=cm&fs=1&to&su=Brian%20Leiter%27s%20slow-motion%20c…
…ow-motion%20car%20crash%20accelerates&body=http%3A%2F%2Fwww.lawyersgunsmoneybl…
An entity reference was found in the document, but there is no reference by that name defined. Often this is caused by misspelling the reference name, unencoded ampersands, or by leaving off the trailing semicolon (;). The most common cause of this error is unencoded ampersands in URLs as described by the WDG in "Ampersands in URLs".
Entity references start with an ampersand (&) and end with a semicolon (;). If you want to use a literal ampersand in your document you must encode it as "&" (even inside URLs!). Be careful to end entity references with a semicolon or your entity reference may get interpreted in connection with the following text. Also keep in mind that named entity references are case-sensitive; &Aelig; and æ are different characters.
If this error appears in some markup generated by PHP's session handling code, this article has explanations and solutions to your problem.
Note that in most documents, errors related to entity references will trigger up to 5 separate messages from the Validator. Usually these will all disappear when the original problem is fixed.
…ow-motion%20car%20crash%20accelerates&body=http%3A%2F%2Fwww.lawyersgunsmoneybl…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…otion%20car%20crash%20accelerates&body=http%3A%2F%2Fwww.lawyersgunsmoneyblog.c…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…otion%20car%20crash%20accelerates&body=http%3A%2F%2Fwww.lawyersgunsmoneyblog.c…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…otion%20car%20crash%20accelerates&body=http%3A%2F%2Fwww.lawyersgunsmoneyblog.c…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…low-motion%20car%20crash%20accelerates&body=http%3A%2F%2Fwww.lawyersgunsmoneyb…
…rs-slow-motion-car-crash-accelerating&ui=2&tf=1&shva=1"></a></li><li><a style=…
An entity reference was found in the document, but there is no reference by that name defined. Often this is caused by misspelling the reference name, unencoded ampersands, or by leaving off the trailing semicolon (;). The most common cause of this error is unencoded ampersands in URLs as described by the WDG in "Ampersands in URLs".
Entity references start with an ampersand (&) and end with a semicolon (;). If you want to use a literal ampersand in your document you must encode it as "&" (even inside URLs!). Be careful to end entity references with a semicolon or your entity reference may get interpreted in connection with the following text. Also keep in mind that named entity references are case-sensitive; &Aelig; and æ are different characters.
If this error appears in some markup generated by PHP's session handling code, this article has explanations and solutions to your problem.
Note that in most documents, errors related to entity references will trigger up to 5 separate messages from the Validator. Usually these will all disappear when the original problem is fixed.
…rs-slow-motion-car-crash-accelerating&ui=2&tf=1&shva=1"></a></li><li><a style=…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…-slow-motion-car-crash-accelerating&ui=2&tf=1&shva=1"></a></li><li><a style="c…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…-slow-motion-car-crash-accelerating&ui=2&tf=1&shva=1"></a></li><li><a style="c…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…-slow-motion-car-crash-accelerating&ui=2&tf=1&shva=1"></a></li><li><a style="c…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…ers-slow-motion-car-crash-accelerating&ui=2&tf=1&shva=1"></a></li><li><a style…
…ow-motion-car-crash-accelerating&ui=2&tf=1&shva=1"></a></li><li><a style="curs…
An entity reference was found in the document, but there is no reference by that name defined. Often this is caused by misspelling the reference name, unencoded ampersands, or by leaving off the trailing semicolon (;). The most common cause of this error is unencoded ampersands in URLs as described by the WDG in "Ampersands in URLs".
Entity references start with an ampersand (&) and end with a semicolon (;). If you want to use a literal ampersand in your document you must encode it as "&" (even inside URLs!). Be careful to end entity references with a semicolon or your entity reference may get interpreted in connection with the following text. Also keep in mind that named entity references are case-sensitive; &Aelig; and æ are different characters.
If this error appears in some markup generated by PHP's session handling code, this article has explanations and solutions to your problem.
Note that in most documents, errors related to entity references will trigger up to 5 separate messages from the Validator. Usually these will all disappear when the original problem is fixed.
…ow-motion-car-crash-accelerating&ui=2&tf=1&shva=1"></a></li><li><a style="curs…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…-motion-car-crash-accelerating&ui=2&tf=1&shva=1"></a></li><li><a style="cursor…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…-motion-car-crash-accelerating&ui=2&tf=1&shva=1"></a></li><li><a style="cursor…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…-motion-car-crash-accelerating&ui=2&tf=1&shva=1"></a></li><li><a style="cursor…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…low-motion-car-crash-accelerating&ui=2&tf=1&shva=1"></a></li><li><a style="cur…
…tion-car-crash-accelerating&ui=2&tf=1&shva=1"></a></li><li><a style="cursor:po…
An entity reference was found in the document, but there is no reference by that name defined. Often this is caused by misspelling the reference name, unencoded ampersands, or by leaving off the trailing semicolon (;). The most common cause of this error is unencoded ampersands in URLs as described by the WDG in "Ampersands in URLs".
Entity references start with an ampersand (&) and end with a semicolon (;). If you want to use a literal ampersand in your document you must encode it as "&" (even inside URLs!). Be careful to end entity references with a semicolon or your entity reference may get interpreted in connection with the following text. Also keep in mind that named entity references are case-sensitive; &Aelig; and æ are different characters.
If this error appears in some markup generated by PHP's session handling code, this article has explanations and solutions to your problem.
Note that in most documents, errors related to entity references will trigger up to 5 separate messages from the Validator. Usually these will all disappear when the original problem is fixed.
…tion-car-crash-accelerating&ui=2&tf=1&shva=1"></a></li><li><a style="cursor:po…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…-car-crash-accelerating&ui=2&tf=1&shva=1"></a></li><li><a style="cursor:pointe…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…-car-crash-accelerating&ui=2&tf=1&shva=1"></a></li><li><a style="cursor:pointe…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…-car-crash-accelerating&ui=2&tf=1&shva=1"></a></li><li><a style="cursor:pointe…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…otion-car-crash-accelerating&ui=2&tf=1&shva=1"></a></li><li><a style="cursor:p…
…or:pointer" rel="nofollow" onMouseOut="fixOnMouseOut(document.getElementById('…
You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
…'), event, 'post-62715')" onMouseOver="more(this,'post-62715')"><img style='ma…
You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
…tent/plugins/sociable/images/more.png'></a></li></ul><div onMouseout="fixOnMou…
The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type
are
type="text/css"
for <style>
and type="text/javascript"
for <script>
.
…/plugins/sociable/images/more.png'></a></li></ul><div onMouseout="fixOnMouseOu…
You may have neglected to close an element, or perhaps you meant to "self-close" an element, that is, ending it with "/>" instead of ">".
…onMouseOver="more(this,'post-62715')"><img style='margin-top:9px' src='http://…
…re.png'></a></li></ul><div onMouseout="fixOnMouseOut(this,event,'post-62715')"…
You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
…rs-slow-motion-car-crash-accelerating&title=Brian%20Leiter%27s%20slow-motion%2…
An entity reference was found in the document, but there is no reference by that name defined. Often this is caused by misspelling the reference name, unencoded ampersands, or by leaving off the trailing semicolon (;). The most common cause of this error is unencoded ampersands in URLs as described by the WDG in "Ampersands in URLs".
Entity references start with an ampersand (&) and end with a semicolon (;). If you want to use a literal ampersand in your document you must encode it as "&" (even inside URLs!). Be careful to end entity references with a semicolon or your entity reference may get interpreted in connection with the following text. Also keep in mind that named entity references are case-sensitive; &Aelig; and æ are different characters.
If this error appears in some markup generated by PHP's session handling code, this article has explanations and solutions to your problem.
Note that in most documents, errors related to entity references will trigger up to 5 separate messages from the Validator. Usually these will all disappear when the original problem is fixed.
…rs-slow-motion-car-crash-accelerating&title=Brian%20Leiter%27s%20slow-motion%2…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…ow-motion-car-crash-accelerating&title=Brian%20Leiter%27s%20slow-motion%20car%…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…ow-motion-car-crash-accelerating&title=Brian%20Leiter%27s%20slow-motion%20car%…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…ow-motion-car-crash-accelerating&title=Brian%20Leiter%27s%20slow-motion%20car%…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…ers-slow-motion-car-crash-accelerating&title=Brian%20Leiter%27s%20slow-motion%…
…e="heigth:32px;width:32px"><a onClick="javascript:var%20ipinsite='Good%20Vibes…
You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
…ive messages (images and videos only)'> <img style='' src='http://www.lawyersg…
The mentioned element is not allowed to appear in the context in which you've placed it; the other mentioned elements are the only ones that are both allowed there and can contain the element mentioned. This might mean that you need a containing element, or possibly that you've forgotten to close a previous element.
One possible cause for this message is that you have attempted to put a block-level element (such as "<p>" or "<table>") inside an inline element (such as "<a>", "<span>", or "<font>").
…sociable/images/option1/32/vuible.png'></a></a></li><li style="heigth:32px;wid…
The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type
are
type="text/css"
for <style>
and type="text/javascript"
for <script>
.
…able/images/option1/32/vuible.png'></a></a></li><li style="heigth:32px;width:3…
You may have neglected to close an element, or perhaps you meant to "self-close" an element, that is, ending it with "/>" instead of ">".
…e messages (images and videos only)'> <img style='' src='http://www.lawyersgun…
…ww.lawyersgunsmoneyblog.com/wp-content/plugins/sociable/images/closelabel.png">
The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type
are
type="text/css"
for <style>
and type="text/javascript"
for <script>
.
…ww.lawyersgunsmoneyblog.com/wp-content/plugins/sociable/images/closelabel.png">
You may have neglected to close an element, or perhaps you meant to "self-close" an element, that is, ending it with "/>" instead of ">".
<img onclick="hide_sociable('post-62715',true)" title="close" src="http://w…
…"https://twitter.com/share" data-text="Brian Leiter's slow-motion car crash ac…
You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
…tion-car-crash-accelerating" data-url="http://www.lawyersgunsmoneyblog.com/201…
You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
…ass="twitter-share-button" data-count="horizontal">Tweet</a><script type="text…
You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
…rs-slow-motion-car-crash-accelerating&send=false&layout=button_count&show_face…
An entity reference was found in the document, but there is no reference by that name defined. Often this is caused by misspelling the reference name, unencoded ampersands, or by leaving off the trailing semicolon (;). The most common cause of this error is unencoded ampersands in URLs as described by the WDG in "Ampersands in URLs".
Entity references start with an ampersand (&) and end with a semicolon (;). If you want to use a literal ampersand in your document you must encode it as "&" (even inside URLs!). Be careful to end entity references with a semicolon or your entity reference may get interpreted in connection with the following text. Also keep in mind that named entity references are case-sensitive; &Aelig; and æ are different characters.
If this error appears in some markup generated by PHP's session handling code, this article has explanations and solutions to your problem.
Note that in most documents, errors related to entity references will trigger up to 5 separate messages from the Validator. Usually these will all disappear when the original problem is fixed.
…rs-slow-motion-car-crash-accelerating&send=false&layout=button_count&show_face…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…low-motion-car-crash-accelerating&send=false&layout=button_count&show_faces=fa…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…low-motion-car-crash-accelerating&send=false&layout=button_count&show_faces=fa…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…low-motion-car-crash-accelerating&send=false&layout=button_count&show_faces=fa…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…ers-slow-motion-car-crash-accelerating&send=false&layout=button_count&show_fac…
…ion-car-crash-accelerating&send=false&layout=button_count&show_faces=false&act…
An entity reference was found in the document, but there is no reference by that name defined. Often this is caused by misspelling the reference name, unencoded ampersands, or by leaving off the trailing semicolon (;). The most common cause of this error is unencoded ampersands in URLs as described by the WDG in "Ampersands in URLs".
Entity references start with an ampersand (&) and end with a semicolon (;). If you want to use a literal ampersand in your document you must encode it as "&" (even inside URLs!). Be careful to end entity references with a semicolon or your entity reference may get interpreted in connection with the following text. Also keep in mind that named entity references are case-sensitive; &Aelig; and æ are different characters.
If this error appears in some markup generated by PHP's session handling code, this article has explanations and solutions to your problem.
Note that in most documents, errors related to entity references will trigger up to 5 separate messages from the Validator. Usually these will all disappear when the original problem is fixed.
…ion-car-crash-accelerating&send=false&layout=button_count&show_faces=false&act…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…r-crash-accelerating&send=false&layout=button_count&show_faces=false&action=li…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…r-crash-accelerating&send=false&layout=button_count&show_faces=false&action=li…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…r-crash-accelerating&send=false&layout=button_count&show_faces=false&action=li…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…tion-car-crash-accelerating&send=false&layout=button_count&show_faces=false&ac…
…rating&send=false&layout=button_count&show_faces=false&action=like&colorscheme…
An entity reference was found in the document, but there is no reference by that name defined. Often this is caused by misspelling the reference name, unencoded ampersands, or by leaving off the trailing semicolon (;). The most common cause of this error is unencoded ampersands in URLs as described by the WDG in "Ampersands in URLs".
Entity references start with an ampersand (&) and end with a semicolon (;). If you want to use a literal ampersand in your document you must encode it as "&" (even inside URLs!). Be careful to end entity references with a semicolon or your entity reference may get interpreted in connection with the following text. Also keep in mind that named entity references are case-sensitive; &Aelig; and æ are different characters.
If this error appears in some markup generated by PHP's session handling code, this article has explanations and solutions to your problem.
Note that in most documents, errors related to entity references will trigger up to 5 separate messages from the Validator. Usually these will all disappear when the original problem is fixed.
…rating&send=false&layout=button_count&show_faces=false&action=like&colorscheme…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…d=false&layout=button_count&show_faces=false&action=like&colorscheme=light&fon…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…d=false&layout=button_count&show_faces=false&action=like&colorscheme=light&fon…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…d=false&layout=button_count&show_faces=false&action=like&colorscheme=light&fon…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…erating&send=false&layout=button_count&show_faces=false&action=like&colorschem…
…&layout=button_count&show_faces=false&action=like&colorscheme=light&font" scro…
An entity reference was found in the document, but there is no reference by that name defined. Often this is caused by misspelling the reference name, unencoded ampersands, or by leaving off the trailing semicolon (;). The most common cause of this error is unencoded ampersands in URLs as described by the WDG in "Ampersands in URLs".
Entity references start with an ampersand (&) and end with a semicolon (;). If you want to use a literal ampersand in your document you must encode it as "&" (even inside URLs!). Be careful to end entity references with a semicolon or your entity reference may get interpreted in connection with the following text. Also keep in mind that named entity references are case-sensitive; &Aelig; and æ are different characters.
If this error appears in some markup generated by PHP's session handling code, this article has explanations and solutions to your problem.
Note that in most documents, errors related to entity references will trigger up to 5 separate messages from the Validator. Usually these will all disappear when the original problem is fixed.
…&layout=button_count&show_faces=false&action=like&colorscheme=light&font" scro…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…t=button_count&show_faces=false&action=like&colorscheme=light&font" scrolling=…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…t=button_count&show_faces=false&action=like&colorscheme=light&font" scrolling=…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…t=button_count&show_faces=false&action=like&colorscheme=light&font" scrolling=…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…e&layout=button_count&show_faces=false&action=like&colorscheme=light&font" scr…
…on_count&show_faces=false&action=like&colorscheme=light&font" scrolling="no" f…
An entity reference was found in the document, but there is no reference by that name defined. Often this is caused by misspelling the reference name, unencoded ampersands, or by leaving off the trailing semicolon (;). The most common cause of this error is unencoded ampersands in URLs as described by the WDG in "Ampersands in URLs".
Entity references start with an ampersand (&) and end with a semicolon (;). If you want to use a literal ampersand in your document you must encode it as "&" (even inside URLs!). Be careful to end entity references with a semicolon or your entity reference may get interpreted in connection with the following text. Also keep in mind that named entity references are case-sensitive; &Aelig; and æ are different characters.
If this error appears in some markup generated by PHP's session handling code, this article has explanations and solutions to your problem.
Note that in most documents, errors related to entity references will trigger up to 5 separate messages from the Validator. Usually these will all disappear when the original problem is fixed.
…on_count&show_faces=false&action=like&colorscheme=light&font" scrolling="no" f…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…ow_faces=false&action=like&colorscheme=light&font" scrolling="no" frameborder=…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…ow_faces=false&action=like&colorscheme=light&font" scrolling="no" frameborder=…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…ow_faces=false&action=like&colorscheme=light&font" scrolling="no" frameborder=…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…ton_count&show_faces=false&action=like&colorscheme=light&font" scrolling="no" …
…s=false&action=like&colorscheme=light&font" scrolling="no" frameborder="0" sty…
An entity reference was found in the document, but there is no reference by that name defined. Often this is caused by misspelling the reference name, unencoded ampersands, or by leaving off the trailing semicolon (;). The most common cause of this error is unencoded ampersands in URLs as described by the WDG in "Ampersands in URLs".
Entity references start with an ampersand (&) and end with a semicolon (;). If you want to use a literal ampersand in your document you must encode it as "&" (even inside URLs!). Be careful to end entity references with a semicolon or your entity reference may get interpreted in connection with the following text. Also keep in mind that named entity references are case-sensitive; &Aelig; and æ are different characters.
If this error appears in some markup generated by PHP's session handling code, this article has explanations and solutions to your problem.
Note that in most documents, errors related to entity references will trigger up to 5 separate messages from the Validator. Usually these will all disappear when the original problem is fixed.
…s=false&action=like&colorscheme=light&font" scrolling="no" frameborder="0" sty…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…lse&action=like&colorscheme=light&font" scrolling="no" frameborder="0" style="…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…lse&action=like&colorscheme=light&font" scrolling="no" frameborder="0" style="…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…lse&action=like&colorscheme=light&font" scrolling="no" frameborder="0" style="…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…es=false&action=like&colorscheme=light&font" scrolling="no" frameborder="0" st…
…t:32px;width:100px" allowTransparency="true"></iframe></li><li id="Google_p"><…
You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
…i id="Google_p"><g:plusone annotation="bubble" href="http://www.lawyersgunsmon…
You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
…"><g:plusone annotation="bubble" href="http://www.lawyersgunsmoneyblog.com/201…
You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
…w-motion-car-crash-accelerating" size="medium"></g:plusone></li><li id="Linked…
You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
…-car-crash-accelerating" size="medium"></g:plusone></li><li id="LinkedIn_Count…
You have used the element named above in your document, but the document type you are using does not define an element of that name. This error is often caused by:
…ript><script type="IN/Share" data-url="http://www.lawyersgunsmoneyblog.com/201…
You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
…-car-crash-accelerating" data-counter="right"></script></li></ul></div><!-- En…
You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
<blockquote>Thomson Reuters was ranked as Canada’s “leading corpora…
The mentioned element is not allowed to appear in the context in which you've placed it; the other mentioned elements are the only ones that are both allowed there and can contain the element mentioned. This might mean that you need a containing element, or possibly that you've forgotten to close a previous element.
One possible cause for this message is that you have attempted to put a block-level element (such as "<p>" or "<table>") inside an inline element (such as "<a>", "<span>", or "<font>").
… is headquartered at 3 Times Square, Manhattan, New York City.</p></blockquote>
You may have neglected to close an element, or perhaps you meant to "self-close" an element, that is, ending it with "/>" instead of ">".
<blockquote>Thomson Reuters was ranked as Canada’s “leading corpora…
… is headquartered at 3 Times Square, Manhattan, New York City.</p></blockquote>
The Validator found an end tag for the above element, but that element is not currently open. This is often caused by a leftover end tag from an element that was removed during editing, or by an implicitly closed element (if you have an error related to an element being used where it is not allowed, this is almost certainly the case). In the latter case this error will disappear as soon as you fix the original problem.
If this error occurred in a script section of your document, you should probably read this FAQ entry.
<blockquote>calling me “unprofessional” is probably defamatory per se in Canada…
The mentioned element is not allowed to appear in the context in which you've placed it; the other mentioned elements are the only ones that are both allowed there and can contain the element mentioned. This might mean that you need a containing element, or possibly that you've forgotten to close a previous element.
One possible cause for this message is that you have attempted to put a block-level element (such as "<p>" or "<table>") inside an inline element (such as "<a>", "<span>", or "<font>").
…m trying to plan out my litigation strategy for the next year!</p></blockquote>
You may have neglected to close an element, or perhaps you meant to "self-close" an element, that is, ending it with "/>" instead of ">".
<blockquote>calling me “unprofessional” is probably defamatory per se in Canada…
…m trying to plan out my litigation strategy for the next year!</p></blockquote>
The Validator found an end tag for the above element, but that element is not currently open. This is often caused by a leftover end tag from an element that was removed during editing, or by an implicitly closed element (if you have an error related to an element being used where it is not allowed, this is almost certainly the case). In the latter case this error will disappear as soon as you fix the original problem.
If this error occurred in a script section of your document, you should probably read this FAQ entry.
<blockquote>Carrie finds it very unsettling – scary, even – that Leiter assumed…
The mentioned element is not allowed to appear in the context in which you've placed it; the other mentioned elements are the only ones that are both allowed there and can contain the element mentioned. This might mean that you need a containing element, or possibly that you've forgotten to close a previous element.
One possible cause for this message is that you have attempted to put a block-level element (such as "<p>" or "<table>") inside an inline element (such as "<a>", "<span>", or "<font>").
…or fear of similar interpretation, leading to similar results.</p></blockquote>
You may have neglected to close an element, or perhaps you meant to "self-close" an element, that is, ending it with "/>" instead of ">".
<blockquote>Carrie finds it very unsettling – scary, even – that Leiter assumed…
…or fear of similar interpretation, leading to similar results.</p></blockquote>
The Validator found an end tag for the above element, but that element is not currently open. This is often caused by a leftover end tag from an element that was removed during editing, or by an implicitly closed element (if you have an error related to an element being used where it is not allowed, this is almost certainly the case). In the latter case this error will disappear as soon as you fix the original problem.
If this error occurred in a script section of your document, you should probably read this FAQ entry.
…ttps://files.nyu.edu/dv26/public/Statement_of_Concern.html" rel="nofollow"></p>
You may have neglected to close an element, or perhaps you meant to "self-close" an element, that is, ending it with "/>" instead of ">".
…p>I want to add a link from NewAPPS. <a href="https://files.nyu.edu/dv26/publ…
…omments reveal more of the history of BL’s bullying and paranoia.</a></p>
The Validator found an end tag for the above element, but that element is not currently open. This is often caused by a leftover end tag from an element that was removed during editing, or by an implicitly closed element (if you have an error related to an element being used where it is not allowed, this is almost certainly the case). In the latter case this error will disappear as soon as you fix the original problem.
If this error occurred in a script section of your document, you should probably read this FAQ entry.
…yblog.com/wp-content/uploads/2013/02/lgm-podcast-title-e1360545152614.png"></a>
The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type
are
type="text/css"
for <style>
and type="text/javascript"
for <script>
.
…yblog.com/wp-content/uploads/2013/02/lgm-podcast-title-e1360545152614.png"></a>
You may have neglected to close an element, or perhaps you meant to "self-close" an element, that is, ending it with "/>" instead of ">".
…smoneyblog.com/category/podcast/feed"><img src="http://www.lawyersgunsmoneyblo…
<input type="hidden" name="cmd" value="_s-xclick">
You may have neglected to close an element, or perhaps you meant to "self-close" an element, that is, ending it with "/>" instead of ">".
<input type="hidden" name="cmd" value="_s-xclick">
">
You may have neglected to close an element, or perhaps you meant to "self-close" an element, that is, ending it with "/>" instead of ">".
<input type="hidden" name="encrypted" value="-----BEGIN PKCS7-----MIIHNwYJKoZIh…
…en_US/i/btn/btn_donate_LG.gif" border="0" name="submit" alt="PayPal - The safe…
You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
…" border="0" name="submit" alt="PayPal - The safer, easier way to pay online!">
You may have neglected to close an element, or perhaps you meant to "self-close" an element, that is, ending it with "/>" instead of ">".
<input type="image" src="https://www.paypal.com/en_US/i/btn/btn_donate_LG.gif" …
…er="0" src="https://www.paypal.com/en_US/i/scr/pixel.gif" width="1" height="1">
You may have neglected to close an element, or perhaps you meant to "self-close" an element, that is, ending it with "/>" instead of ">".
<img alt="" border="0" src="https://www.paypal.com/en_US/i/scr/pixel.gif" width…
…g.com/wp-content/uploads/2012/05/lgmblog-sunant-web-development.png"></a></div>
The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type
are
type="text/css"
for <style>
and type="text/javascript"
for <script>
.
…g.com/wp-content/uploads/2012/05/lgmblog-sunant-web-development.png"></a></div>
You may have neglected to close an element, or perhaps you meant to "self-close" an element, that is, ending it with "/>" instead of ">".
…get"><a href="http://www.sunant.com/"><img src="http://www.lawyersgunsmoneyblo…
…rcm.amazon.com/e/cm?t=lawgunandmon-20&o=1&p=14&l=bn1&mode=books&browse=3377866…
An entity reference was found in the document, but there is no reference by that name defined. Often this is caused by misspelling the reference name, unencoded ampersands, or by leaving off the trailing semicolon (;). The most common cause of this error is unencoded ampersands in URLs as described by the WDG in "Ampersands in URLs".
Entity references start with an ampersand (&) and end with a semicolon (;). If you want to use a literal ampersand in your document you must encode it as "&" (even inside URLs!). Be careful to end entity references with a semicolon or your entity reference may get interpreted in connection with the following text. Also keep in mind that named entity references are case-sensitive; &Aelig; and æ are different characters.
If this error appears in some markup generated by PHP's session handling code, this article has explanations and solutions to your problem.
Note that in most documents, errors related to entity references will trigger up to 5 separate messages from the Validator. Usually these will all disappear when the original problem is fixed.
…rcm.amazon.com/e/cm?t=lawgunandmon-20&o=1&p=14&l=bn1&mode=books&browse=3377866…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…cm.amazon.com/e/cm?t=lawgunandmon-20&o=1&p=14&l=bn1&mode=books&browse=33778660…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…cm.amazon.com/e/cm?t=lawgunandmon-20&o=1&p=14&l=bn1&mode=books&browse=33778660…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…cm.amazon.com/e/cm?t=lawgunandmon-20&o=1&p=14&l=bn1&mode=books&browse=33778660…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…/rcm.amazon.com/e/cm?t=lawgunandmon-20&o=1&p=14&l=bn1&mode=books&browse=337786…
…amazon.com/e/cm?t=lawgunandmon-20&o=1&p=14&l=bn1&mode=books&browse=3377866011&…
An entity reference was found in the document, but there is no reference by that name defined. Often this is caused by misspelling the reference name, unencoded ampersands, or by leaving off the trailing semicolon (;). The most common cause of this error is unencoded ampersands in URLs as described by the WDG in "Ampersands in URLs".
Entity references start with an ampersand (&) and end with a semicolon (;). If you want to use a literal ampersand in your document you must encode it as "&" (even inside URLs!). Be careful to end entity references with a semicolon or your entity reference may get interpreted in connection with the following text. Also keep in mind that named entity references are case-sensitive; &Aelig; and æ are different characters.
If this error appears in some markup generated by PHP's session handling code, this article has explanations and solutions to your problem.
Note that in most documents, errors related to entity references will trigger up to 5 separate messages from the Validator. Usually these will all disappear when the original problem is fixed.
…amazon.com/e/cm?t=lawgunandmon-20&o=1&p=14&l=bn1&mode=books&browse=3377866011&…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…mazon.com/e/cm?t=lawgunandmon-20&o=1&p=14&l=bn1&mode=books&browse=3377866011&f…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…mazon.com/e/cm?t=lawgunandmon-20&o=1&p=14&l=bn1&mode=books&browse=3377866011&f…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…mazon.com/e/cm?t=lawgunandmon-20&o=1&p=14&l=bn1&mode=books&browse=3377866011&f…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
….amazon.com/e/cm?t=lawgunandmon-20&o=1&p=14&l=bn1&mode=books&browse=3377866011…
…n.com/e/cm?t=lawgunandmon-20&o=1&p=14&l=bn1&mode=books&browse=3377866011&fc1=0…
An entity reference was found in the document, but there is no reference by that name defined. Often this is caused by misspelling the reference name, unencoded ampersands, or by leaving off the trailing semicolon (;). The most common cause of this error is unencoded ampersands in URLs as described by the WDG in "Ampersands in URLs".
Entity references start with an ampersand (&) and end with a semicolon (;). If you want to use a literal ampersand in your document you must encode it as "&" (even inside URLs!). Be careful to end entity references with a semicolon or your entity reference may get interpreted in connection with the following text. Also keep in mind that named entity references are case-sensitive; &Aelig; and æ are different characters.
If this error appears in some markup generated by PHP's session handling code, this article has explanations and solutions to your problem.
Note that in most documents, errors related to entity references will trigger up to 5 separate messages from the Validator. Usually these will all disappear when the original problem is fixed.
…n.com/e/cm?t=lawgunandmon-20&o=1&p=14&l=bn1&mode=books&browse=3377866011&fc1=0…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
….com/e/cm?t=lawgunandmon-20&o=1&p=14&l=bn1&mode=books&browse=3377866011&fc1=00…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
….com/e/cm?t=lawgunandmon-20&o=1&p=14&l=bn1&mode=books&browse=3377866011&fc1=00…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
….com/e/cm?t=lawgunandmon-20&o=1&p=14&l=bn1&mode=books&browse=3377866011&fc1=00…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…on.com/e/cm?t=lawgunandmon-20&o=1&p=14&l=bn1&mode=books&browse=3377866011&fc1=…
…e/cm?t=lawgunandmon-20&o=1&p=14&l=bn1&mode=books&browse=3377866011&fc1=000000&…
An entity reference was found in the document, but there is no reference by that name defined. Often this is caused by misspelling the reference name, unencoded ampersands, or by leaving off the trailing semicolon (;). The most common cause of this error is unencoded ampersands in URLs as described by the WDG in "Ampersands in URLs".
Entity references start with an ampersand (&) and end with a semicolon (;). If you want to use a literal ampersand in your document you must encode it as "&" (even inside URLs!). Be careful to end entity references with a semicolon or your entity reference may get interpreted in connection with the following text. Also keep in mind that named entity references are case-sensitive; &Aelig; and æ are different characters.
If this error appears in some markup generated by PHP's session handling code, this article has explanations and solutions to your problem.
Note that in most documents, errors related to entity references will trigger up to 5 separate messages from the Validator. Usually these will all disappear when the original problem is fixed.
…e/cm?t=lawgunandmon-20&o=1&p=14&l=bn1&mode=books&browse=3377866011&fc1=000000&…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…?t=lawgunandmon-20&o=1&p=14&l=bn1&mode=books&browse=3377866011&fc1=000000<1=…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…?t=lawgunandmon-20&o=1&p=14&l=bn1&mode=books&browse=3377866011&fc1=000000<1=…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…?t=lawgunandmon-20&o=1&p=14&l=bn1&mode=books&browse=3377866011&fc1=000000<1=…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…/e/cm?t=lawgunandmon-20&o=1&p=14&l=bn1&mode=books&browse=3377866011&fc1=000000…
…unandmon-20&o=1&p=14&l=bn1&mode=books&browse=3377866011&fc1=000000<1=_blank&…
An entity reference was found in the document, but there is no reference by that name defined. Often this is caused by misspelling the reference name, unencoded ampersands, or by leaving off the trailing semicolon (;). The most common cause of this error is unencoded ampersands in URLs as described by the WDG in "Ampersands in URLs".
Entity references start with an ampersand (&) and end with a semicolon (;). If you want to use a literal ampersand in your document you must encode it as "&" (even inside URLs!). Be careful to end entity references with a semicolon or your entity reference may get interpreted in connection with the following text. Also keep in mind that named entity references are case-sensitive; &Aelig; and æ are different characters.
If this error appears in some markup generated by PHP's session handling code, this article has explanations and solutions to your problem.
Note that in most documents, errors related to entity references will trigger up to 5 separate messages from the Validator. Usually these will all disappear when the original problem is fixed.
…unandmon-20&o=1&p=14&l=bn1&mode=books&browse=3377866011&fc1=000000<1=_blank&…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…on-20&o=1&p=14&l=bn1&mode=books&browse=3377866011&fc1=000000<1=_blank&lc1=33…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…on-20&o=1&p=14&l=bn1&mode=books&browse=3377866011&fc1=000000<1=_blank&lc1=33…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…on-20&o=1&p=14&l=bn1&mode=books&browse=3377866011&fc1=000000<1=_blank&lc1=33…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…gunandmon-20&o=1&p=14&l=bn1&mode=books&browse=3377866011&fc1=000000<1=_blank…
…14&l=bn1&mode=books&browse=3377866011&fc1=000000<1=_blank&lc1=3366FF&bg1=FFF…
An entity reference was found in the document, but there is no reference by that name defined. Often this is caused by misspelling the reference name, unencoded ampersands, or by leaving off the trailing semicolon (;). The most common cause of this error is unencoded ampersands in URLs as described by the WDG in "Ampersands in URLs".
Entity references start with an ampersand (&) and end with a semicolon (;). If you want to use a literal ampersand in your document you must encode it as "&" (even inside URLs!). Be careful to end entity references with a semicolon or your entity reference may get interpreted in connection with the following text. Also keep in mind that named entity references are case-sensitive; &Aelig; and æ are different characters.
If this error appears in some markup generated by PHP's session handling code, this article has explanations and solutions to your problem.
Note that in most documents, errors related to entity references will trigger up to 5 separate messages from the Validator. Usually these will all disappear when the original problem is fixed.
…14&l=bn1&mode=books&browse=3377866011&fc1=000000<1=_blank&lc1=3366FF&bg1=FFF…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…l=bn1&mode=books&browse=3377866011&fc1=000000<1=_blank&lc1=3366FF&bg1=FFFFFF…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…l=bn1&mode=books&browse=3377866011&fc1=000000<1=_blank&lc1=3366FF&bg1=FFFFFF…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…l=bn1&mode=books&browse=3377866011&fc1=000000<1=_blank&lc1=3366FF&bg1=FFFFFF…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…=14&l=bn1&mode=books&browse=3377866011&fc1=000000<1=_blank&lc1=3366FF&bg1=FF…
…de=books&browse=3377866011&fc1=000000<1=_blank&lc1=3366FF&bg1=FFFFFF&f=ifr" …
An entity reference was found in the document, but there is no reference by that name defined. Often this is caused by misspelling the reference name, unencoded ampersands, or by leaving off the trailing semicolon (;). The most common cause of this error is unencoded ampersands in URLs as described by the WDG in "Ampersands in URLs".
Entity references start with an ampersand (&) and end with a semicolon (;). If you want to use a literal ampersand in your document you must encode it as "&" (even inside URLs!). Be careful to end entity references with a semicolon or your entity reference may get interpreted in connection with the following text. Also keep in mind that named entity references are case-sensitive; &Aelig; and æ are different characters.
If this error appears in some markup generated by PHP's session handling code, this article has explanations and solutions to your problem.
Note that in most documents, errors related to entity references will trigger up to 5 separate messages from the Validator. Usually these will all disappear when the original problem is fixed.
…de=books&browse=3377866011&fc1=000000<1=_blank&lc1=3366FF&bg1=FFFFFF&f=ifr" …
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…books&browse=3377866011&fc1=000000<1=_blank&lc1=3366FF&bg1=FFFFFF&f=ifr" mar…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…books&browse=3377866011&fc1=000000<1=_blank&lc1=3366FF&bg1=FFFFFF&f=ifr" mar…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…books&browse=3377866011&fc1=000000<1=_blank&lc1=3366FF&bg1=FFFFFF&f=ifr" mar…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…ode=books&browse=3377866011&fc1=000000<1=_blank&lc1=3366FF&bg1=FFFFFF&f=ifr"…
…owse=3377866011&fc1=000000<1=_blank&lc1=3366FF&bg1=FFFFFF&f=ifr" marginwidth…
An entity reference was found in the document, but there is no reference by that name defined. Often this is caused by misspelling the reference name, unencoded ampersands, or by leaving off the trailing semicolon (;). The most common cause of this error is unencoded ampersands in URLs as described by the WDG in "Ampersands in URLs".
Entity references start with an ampersand (&) and end with a semicolon (;). If you want to use a literal ampersand in your document you must encode it as "&" (even inside URLs!). Be careful to end entity references with a semicolon or your entity reference may get interpreted in connection with the following text. Also keep in mind that named entity references are case-sensitive; &Aelig; and æ are different characters.
If this error appears in some markup generated by PHP's session handling code, this article has explanations and solutions to your problem.
Note that in most documents, errors related to entity references will trigger up to 5 separate messages from the Validator. Usually these will all disappear when the original problem is fixed.
…owse=3377866011&fc1=000000<1=_blank&lc1=3366FF&bg1=FFFFFF&f=ifr" marginwidth…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…e=3377866011&fc1=000000<1=_blank&lc1=3366FF&bg1=FFFFFF&f=ifr" marginwidth="0…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…e=3377866011&fc1=000000<1=_blank&lc1=3366FF&bg1=FFFFFF&f=ifr" marginwidth="0…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…e=3377866011&fc1=000000<1=_blank&lc1=3366FF&bg1=FFFFFF&f=ifr" marginwidth="0…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…rowse=3377866011&fc1=000000<1=_blank&lc1=3366FF&bg1=FFFFFF&f=ifr" marginwidt…
…6011&fc1=000000<1=_blank&lc1=3366FF&bg1=FFFFFF&f=ifr" marginwidth="0" margin…
An entity reference was found in the document, but there is no reference by that name defined. Often this is caused by misspelling the reference name, unencoded ampersands, or by leaving off the trailing semicolon (;). The most common cause of this error is unencoded ampersands in URLs as described by the WDG in "Ampersands in URLs".
Entity references start with an ampersand (&) and end with a semicolon (;). If you want to use a literal ampersand in your document you must encode it as "&" (even inside URLs!). Be careful to end entity references with a semicolon or your entity reference may get interpreted in connection with the following text. Also keep in mind that named entity references are case-sensitive; &Aelig; and æ are different characters.
If this error appears in some markup generated by PHP's session handling code, this article has explanations and solutions to your problem.
Note that in most documents, errors related to entity references will trigger up to 5 separate messages from the Validator. Usually these will all disappear when the original problem is fixed.
…6011&fc1=000000<1=_blank&lc1=3366FF&bg1=FFFFFF&f=ifr" marginwidth="0" margin…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…1&fc1=000000<1=_blank&lc1=3366FF&bg1=FFFFFF&f=ifr" marginwidth="0" marginhei…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…1&fc1=000000<1=_blank&lc1=3366FF&bg1=FFFFFF&f=ifr" marginwidth="0" marginhei…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…1&fc1=000000<1=_blank&lc1=3366FF&bg1=FFFFFF&f=ifr" marginwidth="0" marginhei…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…66011&fc1=000000<1=_blank&lc1=3366FF&bg1=FFFFFF&f=ifr" marginwidth="0" margi…
…0000<1=_blank&lc1=3366FF&bg1=FFFFFF&f=ifr" marginwidth="0" marginheight="0" …
An entity reference was found in the document, but there is no reference by that name defined. Often this is caused by misspelling the reference name, unencoded ampersands, or by leaving off the trailing semicolon (;). The most common cause of this error is unencoded ampersands in URLs as described by the WDG in "Ampersands in URLs".
Entity references start with an ampersand (&) and end with a semicolon (;). If you want to use a literal ampersand in your document you must encode it as "&" (even inside URLs!). Be careful to end entity references with a semicolon or your entity reference may get interpreted in connection with the following text. Also keep in mind that named entity references are case-sensitive; &Aelig; and æ are different characters.
If this error appears in some markup generated by PHP's session handling code, this article has explanations and solutions to your problem.
Note that in most documents, errors related to entity references will trigger up to 5 separate messages from the Validator. Usually these will all disappear when the original problem is fixed.
…0000<1=_blank&lc1=3366FF&bg1=FFFFFF&f=ifr" marginwidth="0" marginheight="0" …
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…000<1=_blank&lc1=3366FF&bg1=FFFFFF&f=ifr" marginwidth="0" marginheight="0" w…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…000<1=_blank&lc1=3366FF&bg1=FFFFFF&f=ifr" marginwidth="0" marginheight="0" w…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…000<1=_blank&lc1=3366FF&bg1=FFFFFF&f=ifr" marginwidth="0" marginheight="0" w…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…00000<1=_blank&lc1=3366FF&bg1=FFFFFF&f=ifr" marginwidth="0" marginheight="0"…
…t="0" width="160" height="600" border="0" frameborder="0" style="border:none;"…
You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
…awyers-guns-and-money" data-widget-id="324714165296037888">Tweets from @drfarl…
You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
<script>!function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0],p=/^http:/.te…
The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type
are
type="text/css"
for <style>
and type="text/javascript"
for <script>
.
….com/wp-content/uploads/2012/01/Lawyer-of-the-Month-e1325796365969.jpeg"><br />
The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type
are
type="text/css"
for <style>
and type="text/javascript"
for <script>
.
….com/wp-content/uploads/2012/01/Lawyer-of-the-Month-e1325796365969.jpeg"><br />
You may have neglected to close an element, or perhaps you meant to "self-close" an element, that is, ending it with "/>" instead of ">".
…an></h3> <div class="textwidget"><p><img src="http://www.lawyersgunsmoneyblo…
…m/wp-content/uploads/2012/01/Clio-Awards-2011-series-e1325796312863.jpg"><br />
The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type
are
type="text/css"
for <style>
and type="text/javascript"
for <script>
.
…m/wp-content/uploads/2012/01/Clio-Awards-2011-series-e1325796312863.jpg"><br />
You may have neglected to close an element, or perhaps you meant to "self-close" an element, that is, ending it with "/>" instead of ">".
<p><img src="http://www.lawyersgunsmoneyblog.com/wp-content/uploads/2012/01/Cli…
…anguage="javascript" src="http://cache.blogads.com/882138591/feed.js"></script>
The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type
are
type="text/css"
for <style>
and type="text/javascript"
for <script>
.
…com/widgets/q?ServiceVersion=20070822&OneJS=1&Operation=GetAdHtml&MarketPlace=…
An entity reference was found in the document, but there is no reference by that name defined. Often this is caused by misspelling the reference name, unencoded ampersands, or by leaving off the trailing semicolon (;). The most common cause of this error is unencoded ampersands in URLs as described by the WDG in "Ampersands in URLs".
Entity references start with an ampersand (&) and end with a semicolon (;). If you want to use a literal ampersand in your document you must encode it as "&" (even inside URLs!). Be careful to end entity references with a semicolon or your entity reference may get interpreted in connection with the following text. Also keep in mind that named entity references are case-sensitive; &Aelig; and æ are different characters.
If this error appears in some markup generated by PHP's session handling code, this article has explanations and solutions to your problem.
Note that in most documents, errors related to entity references will trigger up to 5 separate messages from the Validator. Usually these will all disappear when the original problem is fixed.
…com/widgets/q?ServiceVersion=20070822&OneJS=1&Operation=GetAdHtml&MarketPlace=…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…idgets/q?ServiceVersion=20070822&OneJS=1&Operation=GetAdHtml&MarketPlace=US&so…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…idgets/q?ServiceVersion=20070822&OneJS=1&Operation=GetAdHtml&MarketPlace=US&so…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…idgets/q?ServiceVersion=20070822&OneJS=1&Operation=GetAdHtml&MarketPlace=US&so…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
….com/widgets/q?ServiceVersion=20070822&OneJS=1&Operation=GetAdHtml&MarketPlace…
…ets/q?ServiceVersion=20070822&OneJS=1&Operation=GetAdHtml&MarketPlace=US&sourc…
An entity reference was found in the document, but there is no reference by that name defined. Often this is caused by misspelling the reference name, unencoded ampersands, or by leaving off the trailing semicolon (;). The most common cause of this error is unencoded ampersands in URLs as described by the WDG in "Ampersands in URLs".
Entity references start with an ampersand (&) and end with a semicolon (;). If you want to use a literal ampersand in your document you must encode it as "&" (even inside URLs!). Be careful to end entity references with a semicolon or your entity reference may get interpreted in connection with the following text. Also keep in mind that named entity references are case-sensitive; &Aelig; and æ are different characters.
If this error appears in some markup generated by PHP's session handling code, this article has explanations and solutions to your problem.
Note that in most documents, errors related to entity references will trigger up to 5 separate messages from the Validator. Usually these will all disappear when the original problem is fixed.
…ets/q?ServiceVersion=20070822&OneJS=1&Operation=GetAdHtml&MarketPlace=US&sourc…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…viceVersion=20070822&OneJS=1&Operation=GetAdHtml&MarketPlace=US&source=ss&ref=…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…viceVersion=20070822&OneJS=1&Operation=GetAdHtml&MarketPlace=US&source=ss&ref=…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…viceVersion=20070822&OneJS=1&Operation=GetAdHtml&MarketPlace=US&source=ss&ref=…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…gets/q?ServiceVersion=20070822&OneJS=1&Operation=GetAdHtml&MarketPlace=US&sour…
…=20070822&OneJS=1&Operation=GetAdHtml&MarketPlace=US&source=ss&ref=ss_til&ad_t…
An entity reference was found in the document, but there is no reference by that name defined. Often this is caused by misspelling the reference name, unencoded ampersands, or by leaving off the trailing semicolon (;). The most common cause of this error is unencoded ampersands in URLs as described by the WDG in "Ampersands in URLs".
Entity references start with an ampersand (&) and end with a semicolon (;). If you want to use a literal ampersand in your document you must encode it as "&" (even inside URLs!). Be careful to end entity references with a semicolon or your entity reference may get interpreted in connection with the following text. Also keep in mind that named entity references are case-sensitive; &Aelig; and æ are different characters.
If this error appears in some markup generated by PHP's session handling code, this article has explanations and solutions to your problem.
Note that in most documents, errors related to entity references will trigger up to 5 separate messages from the Validator. Usually these will all disappear when the original problem is fixed.
…=20070822&OneJS=1&Operation=GetAdHtml&MarketPlace=US&source=ss&ref=ss_til&ad_t…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…neJS=1&Operation=GetAdHtml&MarketPlace=US&source=ss&ref=ss_til&ad_type=product…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…neJS=1&Operation=GetAdHtml&MarketPlace=US&source=ss&ref=ss_til&ad_type=product…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…neJS=1&Operation=GetAdHtml&MarketPlace=US&source=ss&ref=ss_til&ad_type=product…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…n=20070822&OneJS=1&Operation=GetAdHtml&MarketPlace=US&source=ss&ref=ss_til&ad_…
…=1&Operation=GetAdHtml&MarketPlace=US&source=ss&ref=ss_til&ad_type=product_lin…
An entity reference was found in the document, but there is no reference by that name defined. Often this is caused by misspelling the reference name, unencoded ampersands, or by leaving off the trailing semicolon (;). The most common cause of this error is unencoded ampersands in URLs as described by the WDG in "Ampersands in URLs".
Entity references start with an ampersand (&) and end with a semicolon (;). If you want to use a literal ampersand in your document you must encode it as "&" (even inside URLs!). Be careful to end entity references with a semicolon or your entity reference may get interpreted in connection with the following text. Also keep in mind that named entity references are case-sensitive; &Aelig; and æ are different characters.
If this error appears in some markup generated by PHP's session handling code, this article has explanations and solutions to your problem.
Note that in most documents, errors related to entity references will trigger up to 5 separate messages from the Validator. Usually these will all disappear when the original problem is fixed.
…=1&Operation=GetAdHtml&MarketPlace=US&source=ss&ref=ss_til&ad_type=product_lin…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…ration=GetAdHtml&MarketPlace=US&source=ss&ref=ss_til&ad_type=product_link&trac…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…ration=GetAdHtml&MarketPlace=US&source=ss&ref=ss_til&ad_type=product_link&trac…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…ration=GetAdHtml&MarketPlace=US&source=ss&ref=ss_til&ad_type=product_link&trac…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…S=1&Operation=GetAdHtml&MarketPlace=US&source=ss&ref=ss_til&ad_type=product_li…
…on=GetAdHtml&MarketPlace=US&source=ss&ref=ss_til&ad_type=product_link&tracking…
An entity reference was found in the document, but there is no reference by that name defined. Often this is caused by misspelling the reference name, unencoded ampersands, or by leaving off the trailing semicolon (;). The most common cause of this error is unencoded ampersands in URLs as described by the WDG in "Ampersands in URLs".
Entity references start with an ampersand (&) and end with a semicolon (;). If you want to use a literal ampersand in your document you must encode it as "&" (even inside URLs!). Be careful to end entity references with a semicolon or your entity reference may get interpreted in connection with the following text. Also keep in mind that named entity references are case-sensitive; &Aelig; and æ are different characters.
If this error appears in some markup generated by PHP's session handling code, this article has explanations and solutions to your problem.
Note that in most documents, errors related to entity references will trigger up to 5 separate messages from the Validator. Usually these will all disappear when the original problem is fixed.
…on=GetAdHtml&MarketPlace=US&source=ss&ref=ss_til&ad_type=product_link&tracking…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…GetAdHtml&MarketPlace=US&source=ss&ref=ss_til&ad_type=product_link&tracking_id…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…GetAdHtml&MarketPlace=US&source=ss&ref=ss_til&ad_type=product_link&tracking_id…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…GetAdHtml&MarketPlace=US&source=ss&ref=ss_til&ad_type=product_link&tracking_id…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…ion=GetAdHtml&MarketPlace=US&source=ss&ref=ss_til&ad_type=product_link&trackin…
…l&MarketPlace=US&source=ss&ref=ss_til&ad_type=product_link&tracking_id=lawguna…
An entity reference was found in the document, but there is no reference by that name defined. Often this is caused by misspelling the reference name, unencoded ampersands, or by leaving off the trailing semicolon (;). The most common cause of this error is unencoded ampersands in URLs as described by the WDG in "Ampersands in URLs".
Entity references start with an ampersand (&) and end with a semicolon (;). If you want to use a literal ampersand in your document you must encode it as "&" (even inside URLs!). Be careful to end entity references with a semicolon or your entity reference may get interpreted in connection with the following text. Also keep in mind that named entity references are case-sensitive; &Aelig; and æ are different characters.
If this error appears in some markup generated by PHP's session handling code, this article has explanations and solutions to your problem.
Note that in most documents, errors related to entity references will trigger up to 5 separate messages from the Validator. Usually these will all disappear when the original problem is fixed.
…l&MarketPlace=US&source=ss&ref=ss_til&ad_type=product_link&tracking_id=lawguna…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…tPlace=US&source=ss&ref=ss_til&ad_type=product_link&tracking_id=lawgunandmon-2…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…tPlace=US&source=ss&ref=ss_til&ad_type=product_link&tracking_id=lawgunandmon-2…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…tPlace=US&source=ss&ref=ss_til&ad_type=product_link&tracking_id=lawgunandmon-2…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…ml&MarketPlace=US&source=ss&ref=ss_til&ad_type=product_link&tracking_id=lawgun…
…ce=ss&ref=ss_til&ad_type=product_link&tracking_id=lawgunandmon-20&marketplace=…
An entity reference was found in the document, but there is no reference by that name defined. Often this is caused by misspelling the reference name, unencoded ampersands, or by leaving off the trailing semicolon (;). The most common cause of this error is unencoded ampersands in URLs as described by the WDG in "Ampersands in URLs".
Entity references start with an ampersand (&) and end with a semicolon (;). If you want to use a literal ampersand in your document you must encode it as "&" (even inside URLs!). Be careful to end entity references with a semicolon or your entity reference may get interpreted in connection with the following text. Also keep in mind that named entity references are case-sensitive; &Aelig; and æ are different characters.
If this error appears in some markup generated by PHP's session handling code, this article has explanations and solutions to your problem.
Note that in most documents, errors related to entity references will trigger up to 5 separate messages from the Validator. Usually these will all disappear when the original problem is fixed.
…ce=ss&ref=ss_til&ad_type=product_link&tracking_id=lawgunandmon-20&marketplace=…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…s_til&ad_type=product_link&tracking_id=lawgunandmon-20&marketplace=amazon®i…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…s_til&ad_type=product_link&tracking_id=lawgunandmon-20&marketplace=amazon®i…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…s_til&ad_type=product_link&tracking_id=lawgunandmon-20&marketplace=amazon®i…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…rce=ss&ref=ss_til&ad_type=product_link&tracking_id=lawgunandmon-20&marketplace…
…duct_link&tracking_id=lawgunandmon-20&marketplace=amazon®ion=US&placement=B…
An entity reference was found in the document, but there is no reference by that name defined. Often this is caused by misspelling the reference name, unencoded ampersands, or by leaving off the trailing semicolon (;). The most common cause of this error is unencoded ampersands in URLs as described by the WDG in "Ampersands in URLs".
Entity references start with an ampersand (&) and end with a semicolon (;). If you want to use a literal ampersand in your document you must encode it as "&" (even inside URLs!). Be careful to end entity references with a semicolon or your entity reference may get interpreted in connection with the following text. Also keep in mind that named entity references are case-sensitive; &Aelig; and æ are different characters.
If this error appears in some markup generated by PHP's session handling code, this article has explanations and solutions to your problem.
Note that in most documents, errors related to entity references will trigger up to 5 separate messages from the Validator. Usually these will all disappear when the original problem is fixed.
…duct_link&tracking_id=lawgunandmon-20&marketplace=amazon®ion=US&placement=B…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…racking_id=lawgunandmon-20&marketplace=amazon®ion=US&placement=B00JIV2ZT6&a…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…racking_id=lawgunandmon-20&marketplace=amazon®ion=US&placement=B00JIV2ZT6&a…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…racking_id=lawgunandmon-20&marketplace=amazon®ion=US&placement=B00JIV2ZT6&a…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…oduct_link&tracking_id=lawgunandmon-20&marketplace=amazon®ion=US&placement=…
…id=lawgunandmon-20&marketplace=amazon®ion=US&placement=B00JIV2ZT6&asins=B00…
An entity reference was found in the document, but there is no reference by that name defined. Often this is caused by misspelling the reference name, unencoded ampersands, or by leaving off the trailing semicolon (;). The most common cause of this error is unencoded ampersands in URLs as described by the WDG in "Ampersands in URLs".
Entity references start with an ampersand (&) and end with a semicolon (;). If you want to use a literal ampersand in your document you must encode it as "&" (even inside URLs!). Be careful to end entity references with a semicolon or your entity reference may get interpreted in connection with the following text. Also keep in mind that named entity references are case-sensitive; &Aelig; and æ are different characters.
If this error appears in some markup generated by PHP's session handling code, this article has explanations and solutions to your problem.
Note that in most documents, errors related to entity references will trigger up to 5 separate messages from the Validator. Usually these will all disappear when the original problem is fixed.
…id=lawgunandmon-20&marketplace=amazon®ion=US&placement=B00JIV2ZT6&asins=B00…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…gunandmon-20&marketplace=amazon®ion=US&placement=B00JIV2ZT6&asins=B00JIV2ZT…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…gunandmon-20&marketplace=amazon®ion=US&placement=B00JIV2ZT6&asins=B00JIV2ZT…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…gunandmon-20&marketplace=amazon®ion=US&placement=B00JIV2ZT6&asins=B00JIV2ZT…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…_id=lawgunandmon-20&marketplace=amazon®ion=US&placement=B00JIV2ZT6&asins=B0…
…ndmon-20&marketplace=amazon®ion=US&placement=B00JIV2ZT6&asins=B00JIV2ZT6&li…
An entity reference was found in the document, but there is no reference by that name defined. Often this is caused by misspelling the reference name, unencoded ampersands, or by leaving off the trailing semicolon (;). The most common cause of this error is unencoded ampersands in URLs as described by the WDG in "Ampersands in URLs".
Entity references start with an ampersand (&) and end with a semicolon (;). If you want to use a literal ampersand in your document you must encode it as "&" (even inside URLs!). Be careful to end entity references with a semicolon or your entity reference may get interpreted in connection with the following text. Also keep in mind that named entity references are case-sensitive; &Aelig; and æ are different characters.
If this error appears in some markup generated by PHP's session handling code, this article has explanations and solutions to your problem.
Note that in most documents, errors related to entity references will trigger up to 5 separate messages from the Validator. Usually these will all disappear when the original problem is fixed.
…ndmon-20&marketplace=amazon®ion=US&placement=B00JIV2ZT6&asins=B00JIV2ZT6&li…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…marketplace=amazon®ion=US&placement=B00JIV2ZT6&asins=B00JIV2ZT6&linkId=BKOF…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…marketplace=amazon®ion=US&placement=B00JIV2ZT6&asins=B00JIV2ZT6&linkId=BKOF…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…marketplace=amazon®ion=US&placement=B00JIV2ZT6&asins=B00JIV2ZT6&linkId=BKOF…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…andmon-20&marketplace=amazon®ion=US&placement=B00JIV2ZT6&asins=B00JIV2ZT6&l…
…amazon®ion=US&placement=B00JIV2ZT6&asins=B00JIV2ZT6&linkId=BKOFIGNR6MGH3TSP…
An entity reference was found in the document, but there is no reference by that name defined. Often this is caused by misspelling the reference name, unencoded ampersands, or by leaving off the trailing semicolon (;). The most common cause of this error is unencoded ampersands in URLs as described by the WDG in "Ampersands in URLs".
Entity references start with an ampersand (&) and end with a semicolon (;). If you want to use a literal ampersand in your document you must encode it as "&" (even inside URLs!). Be careful to end entity references with a semicolon or your entity reference may get interpreted in connection with the following text. Also keep in mind that named entity references are case-sensitive; &Aelig; and æ are different characters.
If this error appears in some markup generated by PHP's session handling code, this article has explanations and solutions to your problem.
Note that in most documents, errors related to entity references will trigger up to 5 separate messages from the Validator. Usually these will all disappear when the original problem is fixed.
…amazon®ion=US&placement=B00JIV2ZT6&asins=B00JIV2ZT6&linkId=BKOFIGNR6MGH3TSP…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…n®ion=US&placement=B00JIV2ZT6&asins=B00JIV2ZT6&linkId=BKOFIGNR6MGH3TSP&show…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…n®ion=US&placement=B00JIV2ZT6&asins=B00JIV2ZT6&linkId=BKOFIGNR6MGH3TSP&show…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…n®ion=US&placement=B00JIV2ZT6&asins=B00JIV2ZT6&linkId=BKOFIGNR6MGH3TSP&show…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…=amazon®ion=US&placement=B00JIV2ZT6&asins=B00JIV2ZT6&linkId=BKOFIGNR6MGH3TS…
…placement=B00JIV2ZT6&asins=B00JIV2ZT6&linkId=BKOFIGNR6MGH3TSP&show_border=true…
An entity reference was found in the document, but there is no reference by that name defined. Often this is caused by misspelling the reference name, unencoded ampersands, or by leaving off the trailing semicolon (;). The most common cause of this error is unencoded ampersands in URLs as described by the WDG in "Ampersands in URLs".
Entity references start with an ampersand (&) and end with a semicolon (;). If you want to use a literal ampersand in your document you must encode it as "&" (even inside URLs!). Be careful to end entity references with a semicolon or your entity reference may get interpreted in connection with the following text. Also keep in mind that named entity references are case-sensitive; &Aelig; and æ are different characters.
If this error appears in some markup generated by PHP's session handling code, this article has explanations and solutions to your problem.
Note that in most documents, errors related to entity references will trigger up to 5 separate messages from the Validator. Usually these will all disappear when the original problem is fixed.
…placement=B00JIV2ZT6&asins=B00JIV2ZT6&linkId=BKOFIGNR6MGH3TSP&show_border=true…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…ent=B00JIV2ZT6&asins=B00JIV2ZT6&linkId=BKOFIGNR6MGH3TSP&show_border=true&link_…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…ent=B00JIV2ZT6&asins=B00JIV2ZT6&linkId=BKOFIGNR6MGH3TSP&show_border=true&link_…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…ent=B00JIV2ZT6&asins=B00JIV2ZT6&linkId=BKOFIGNR6MGH3TSP&show_border=true&link_…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…&placement=B00JIV2ZT6&asins=B00JIV2ZT6&linkId=BKOFIGNR6MGH3TSP&show_border=tru…
…ns=B00JIV2ZT6&linkId=BKOFIGNR6MGH3TSP&show_border=true&link_opens_in_new_windo…
An entity reference was found in the document, but there is no reference by that name defined. Often this is caused by misspelling the reference name, unencoded ampersands, or by leaving off the trailing semicolon (;). The most common cause of this error is unencoded ampersands in URLs as described by the WDG in "Ampersands in URLs".
Entity references start with an ampersand (&) and end with a semicolon (;). If you want to use a literal ampersand in your document you must encode it as "&" (even inside URLs!). Be careful to end entity references with a semicolon or your entity reference may get interpreted in connection with the following text. Also keep in mind that named entity references are case-sensitive; &Aelig; and æ are different characters.
If this error appears in some markup generated by PHP's session handling code, this article has explanations and solutions to your problem.
Note that in most documents, errors related to entity references will trigger up to 5 separate messages from the Validator. Usually these will all disappear when the original problem is fixed.
…ns=B00JIV2ZT6&linkId=BKOFIGNR6MGH3TSP&show_border=true&link_opens_in_new_windo…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…T6&linkId=BKOFIGNR6MGH3TSP&show_border=true&link_opens_in_new_window=true"><br…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…T6&linkId=BKOFIGNR6MGH3TSP&show_border=true&link_opens_in_new_window=true"><br…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…T6&linkId=BKOFIGNR6MGH3TSP&show_border=true&link_opens_in_new_window=true"><br…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…ins=B00JIV2ZT6&linkId=BKOFIGNR6MGH3TSP&show_border=true&link_opens_in_new_wind…
…&linkId=BKOFIGNR6MGH3TSP&show_border=true&link_opens_in_new_window=true"><br />
An entity reference was found in the document, but there is no reference by that name defined. Often this is caused by misspelling the reference name, unencoded ampersands, or by leaving off the trailing semicolon (;). The most common cause of this error is unencoded ampersands in URLs as described by the WDG in "Ampersands in URLs".
Entity references start with an ampersand (&) and end with a semicolon (;). If you want to use a literal ampersand in your document you must encode it as "&" (even inside URLs!). Be careful to end entity references with a semicolon or your entity reference may get interpreted in connection with the following text. Also keep in mind that named entity references are case-sensitive; &Aelig; and æ are different characters.
If this error appears in some markup generated by PHP's session handling code, this article has explanations and solutions to your problem.
Note that in most documents, errors related to entity references will trigger up to 5 separate messages from the Validator. Usually these will all disappear when the original problem is fixed.
…&linkId=BKOFIGNR6MGH3TSP&show_border=true&link_opens_in_new_window=true"><br />
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…&linkId=BKOFIGNR6MGH3TSP&show_border=true&link_opens_in_new_window=true"><br />
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…&linkId=BKOFIGNR6MGH3TSP&show_border=true&link_opens_in_new_window=true"><br />
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…&linkId=BKOFIGNR6MGH3TSP&show_border=true&link_opens_in_new_window=true"><br />
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…&linkId=BKOFIGNR6MGH3TSP&show_border=true&link_opens_in_new_window=true"><br />
…a.amazon-adsystem.com/e/cm?lt1=_blank&bc1=000000&IS2=1&bg1=FFFFFF&fc1=000000&l…
An entity reference was found in the document, but there is no reference by that name defined. Often this is caused by misspelling the reference name, unencoded ampersands, or by leaving off the trailing semicolon (;). The most common cause of this error is unencoded ampersands in URLs as described by the WDG in "Ampersands in URLs".
Entity references start with an ampersand (&) and end with a semicolon (;). If you want to use a literal ampersand in your document you must encode it as "&" (even inside URLs!). Be careful to end entity references with a semicolon or your entity reference may get interpreted in connection with the following text. Also keep in mind that named entity references are case-sensitive; &Aelig; and æ are different characters.
If this error appears in some markup generated by PHP's session handling code, this article has explanations and solutions to your problem.
Note that in most documents, errors related to entity references will trigger up to 5 separate messages from the Validator. Usually these will all disappear when the original problem is fixed.
…a.amazon-adsystem.com/e/cm?lt1=_blank&bc1=000000&IS2=1&bg1=FFFFFF&fc1=000000&l…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…mazon-adsystem.com/e/cm?lt1=_blank&bc1=000000&IS2=1&bg1=FFFFFF&fc1=000000&lc1=…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…mazon-adsystem.com/e/cm?lt1=_blank&bc1=000000&IS2=1&bg1=FFFFFF&fc1=000000&lc1=…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…mazon-adsystem.com/e/cm?lt1=_blank&bc1=000000&IS2=1&bg1=FFFFFF&fc1=000000&lc1=…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…na.amazon-adsystem.com/e/cm?lt1=_blank&bc1=000000&IS2=1&bg1=FFFFFF&fc1=000000&…
…system.com/e/cm?lt1=_blank&bc1=000000&IS2=1&bg1=FFFFFF&fc1=000000&lc1=0000FF&t…
An entity reference was found in the document, but there is no reference by that name defined. Often this is caused by misspelling the reference name, unencoded ampersands, or by leaving off the trailing semicolon (;). The most common cause of this error is unencoded ampersands in URLs as described by the WDG in "Ampersands in URLs".
Entity references start with an ampersand (&) and end with a semicolon (;). If you want to use a literal ampersand in your document you must encode it as "&" (even inside URLs!). Be careful to end entity references with a semicolon or your entity reference may get interpreted in connection with the following text. Also keep in mind that named entity references are case-sensitive; &Aelig; and æ are different characters.
If this error appears in some markup generated by PHP's session handling code, this article has explanations and solutions to your problem.
Note that in most documents, errors related to entity references will trigger up to 5 separate messages from the Validator. Usually these will all disappear when the original problem is fixed.
…system.com/e/cm?lt1=_blank&bc1=000000&IS2=1&bg1=FFFFFF&fc1=000000&lc1=0000FF&t…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…tem.com/e/cm?lt1=_blank&bc1=000000&IS2=1&bg1=FFFFFF&fc1=000000&lc1=0000FF&t=la…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…tem.com/e/cm?lt1=_blank&bc1=000000&IS2=1&bg1=FFFFFF&fc1=000000&lc1=0000FF&t=la…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…tem.com/e/cm?lt1=_blank&bc1=000000&IS2=1&bg1=FFFFFF&fc1=000000&lc1=0000FF&t=la…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…dsystem.com/e/cm?lt1=_blank&bc1=000000&IS2=1&bg1=FFFFFF&fc1=000000&lc1=0000FF&…
…m/e/cm?lt1=_blank&bc1=000000&IS2=1&bg1=FFFFFF&fc1=000000&lc1=0000FF&t=lawgunan…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…m/e/cm?lt1=_blank&bc1=000000&IS2=1&bg1=FFFFFF&fc1=000000&lc1=0000FF&t=lawgunan…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…m/e/cm?lt1=_blank&bc1=000000&IS2=1&bg1=FFFFFF&fc1=000000&lc1=0000FF&t=lawgunan…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…66011&fc1=000000<1=_blank&lc1=3366FF&bg1=FFFFFF&f=ifr" marginwidth="0" margi…
…_blank&bc1=000000&IS2=1&bg1=FFFFFF&fc1=000000&lc1=0000FF&t=lawgunandmon-20&o=1…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…_blank&bc1=000000&IS2=1&bg1=FFFFFF&fc1=000000&lc1=0000FF&t=lawgunandmon-20&o=1…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…_blank&bc1=000000&IS2=1&bg1=FFFFFF&fc1=000000&lc1=0000FF&t=lawgunandmon-20&o=1…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…=14&l=bn1&mode=books&browse=3377866011&fc1=000000<1=_blank&lc1=3366FF&bg1=FF…
…000000&IS2=1&bg1=FFFFFF&fc1=000000&lc1=0000FF&t=lawgunandmon-20&o=1&p=8&l=as4&…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…000000&IS2=1&bg1=FFFFFF&fc1=000000&lc1=0000FF&t=lawgunandmon-20&o=1&p=8&l=as4&…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…000000&IS2=1&bg1=FFFFFF&fc1=000000&lc1=0000FF&t=lawgunandmon-20&o=1&p=8&l=as4&…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…rowse=3377866011&fc1=000000<1=_blank&lc1=3366FF&bg1=FFFFFF&f=ifr" marginwidt…
…S2=1&bg1=FFFFFF&fc1=000000&lc1=0000FF&t=lawgunandmon-20&o=1&p=8&l=as4&m=amazon…
An entity reference was found in the document, but there is no reference by that name defined. Often this is caused by misspelling the reference name, unencoded ampersands, or by leaving off the trailing semicolon (;). The most common cause of this error is unencoded ampersands in URLs as described by the WDG in "Ampersands in URLs".
Entity references start with an ampersand (&) and end with a semicolon (;). If you want to use a literal ampersand in your document you must encode it as "&" (even inside URLs!). Be careful to end entity references with a semicolon or your entity reference may get interpreted in connection with the following text. Also keep in mind that named entity references are case-sensitive; &Aelig; and æ are different characters.
If this error appears in some markup generated by PHP's session handling code, this article has explanations and solutions to your problem.
Note that in most documents, errors related to entity references will trigger up to 5 separate messages from the Validator. Usually these will all disappear when the original problem is fixed.
…S2=1&bg1=FFFFFF&fc1=000000&lc1=0000FF&t=lawgunandmon-20&o=1&p=8&l=as4&m=amazon…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…2=1&bg1=FFFFFF&fc1=000000&lc1=0000FF&t=lawgunandmon-20&o=1&p=8&l=as4&m=amazon&…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…2=1&bg1=FFFFFF&fc1=000000&lc1=0000FF&t=lawgunandmon-20&o=1&p=8&l=as4&m=amazon&…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…2=1&bg1=FFFFFF&fc1=000000&lc1=0000FF&t=lawgunandmon-20&o=1&p=8&l=as4&m=amazon&…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…IS2=1&bg1=FFFFFF&fc1=000000&lc1=0000FF&t=lawgunandmon-20&o=1&p=8&l=as4&m=amazo…
…=000000&lc1=0000FF&t=lawgunandmon-20&o=1&p=8&l=as4&m=amazon&f=ifr&ref=ss_til&a…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…=000000&lc1=0000FF&t=lawgunandmon-20&o=1&p=8&l=as4&m=amazon&f=ifr&ref=ss_til&a…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…=000000&lc1=0000FF&t=lawgunandmon-20&o=1&p=8&l=as4&m=amazon&f=ifr&ref=ss_til&a…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…/rcm.amazon.com/e/cm?t=lawgunandmon-20&o=1&p=14&l=bn1&mode=books&browse=337786…
…000&lc1=0000FF&t=lawgunandmon-20&o=1&p=8&l=as4&m=amazon&f=ifr&ref=ss_til&asins…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…000&lc1=0000FF&t=lawgunandmon-20&o=1&p=8&l=as4&m=amazon&f=ifr&ref=ss_til&asins…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…000&lc1=0000FF&t=lawgunandmon-20&o=1&p=8&l=as4&m=amazon&f=ifr&ref=ss_til&asins…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
….amazon.com/e/cm?t=lawgunandmon-20&o=1&p=14&l=bn1&mode=books&browse=3377866011…
…lc1=0000FF&t=lawgunandmon-20&o=1&p=8&l=as4&m=amazon&f=ifr&ref=ss_til&asins=081…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…lc1=0000FF&t=lawgunandmon-20&o=1&p=8&l=as4&m=amazon&f=ifr&ref=ss_til&asins=081…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…lc1=0000FF&t=lawgunandmon-20&o=1&p=8&l=as4&m=amazon&f=ifr&ref=ss_til&asins=081…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…on.com/e/cm?t=lawgunandmon-20&o=1&p=14&l=bn1&mode=books&browse=3377866011&fc1=…
…000FF&t=lawgunandmon-20&o=1&p=8&l=as4&m=amazon&f=ifr&ref=ss_til&asins=08131449…
An entity reference was found in the document, but there is no reference by that name defined. Often this is caused by misspelling the reference name, unencoded ampersands, or by leaving off the trailing semicolon (;). The most common cause of this error is unencoded ampersands in URLs as described by the WDG in "Ampersands in URLs".
Entity references start with an ampersand (&) and end with a semicolon (;). If you want to use a literal ampersand in your document you must encode it as "&" (even inside URLs!). Be careful to end entity references with a semicolon or your entity reference may get interpreted in connection with the following text. Also keep in mind that named entity references are case-sensitive; &Aelig; and æ are different characters.
If this error appears in some markup generated by PHP's session handling code, this article has explanations and solutions to your problem.
Note that in most documents, errors related to entity references will trigger up to 5 separate messages from the Validator. Usually these will all disappear when the original problem is fixed.
…000FF&t=lawgunandmon-20&o=1&p=8&l=as4&m=amazon&f=ifr&ref=ss_til&asins=08131449…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…00FF&t=lawgunandmon-20&o=1&p=8&l=as4&m=amazon&f=ifr&ref=ss_til&asins=081314495…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…00FF&t=lawgunandmon-20&o=1&p=8&l=as4&m=amazon&f=ifr&ref=ss_til&asins=081314495…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…00FF&t=lawgunandmon-20&o=1&p=8&l=as4&m=amazon&f=ifr&ref=ss_til&asins=081314495…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…0000FF&t=lawgunandmon-20&o=1&p=8&l=as4&m=amazon&f=ifr&ref=ss_til&asins=0813144…
…wgunandmon-20&o=1&p=8&l=as4&m=amazon&f=ifr&ref=ss_til&asins=0813144957" style=…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…wgunandmon-20&o=1&p=8&l=as4&m=amazon&f=ifr&ref=ss_til&asins=0813144957" style=…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…wgunandmon-20&o=1&p=8&l=as4&m=amazon&f=ifr&ref=ss_til&asins=0813144957" style=…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…00000<1=_blank&lc1=3366FF&bg1=FFFFFF&f=ifr" marginwidth="0" marginheight="0"…
…on-20&o=1&p=8&l=as4&m=amazon&f=ifr&ref=ss_til&asins=0813144957" style="width:1…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…on-20&o=1&p=8&l=as4&m=amazon&f=ifr&ref=ss_til&asins=0813144957" style="width:1…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…on-20&o=1&p=8&l=as4&m=amazon&f=ifr&ref=ss_til&asins=0813144957" style="width:1…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…ion=GetAdHtml&MarketPlace=US&source=ss&ref=ss_til&ad_type=product_link&trackin…
…&l=as4&m=amazon&f=ifr&ref=ss_til&asins=0813144957" style="width:120px;height:2…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…&l=as4&m=amazon&f=ifr&ref=ss_til&asins=0813144957" style="width:120px;height:2…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…&l=as4&m=amazon&f=ifr&ref=ss_til&asins=0813144957" style="width:120px;height:2…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…=amazon®ion=US&placement=B00JIV2ZT6&asins=B00JIV2ZT6&linkId=BKOFIGNR6MGH3TS…
…mazon-adsystem.com/e/cm?lt1=_blank&bc1=000000&IS2=1&bg1=FFFFFF&fc1=000000&lc1=…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…mazon-adsystem.com/e/cm?lt1=_blank&bc1=000000&IS2=1&bg1=FFFFFF&fc1=000000&lc1=…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…mazon-adsystem.com/e/cm?lt1=_blank&bc1=000000&IS2=1&bg1=FFFFFF&fc1=000000&lc1=…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…na.amazon-adsystem.com/e/cm?lt1=_blank&bc1=000000&IS2=1&bg1=FFFFFF&fc1=000000&…
…tem.com/e/cm?lt1=_blank&bc1=000000&IS2=1&bg1=FFFFFF&fc1=000000&lc1=0000FF&t=la…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…tem.com/e/cm?lt1=_blank&bc1=000000&IS2=1&bg1=FFFFFF&fc1=000000&lc1=0000FF&t=la…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…tem.com/e/cm?lt1=_blank&bc1=000000&IS2=1&bg1=FFFFFF&fc1=000000&lc1=0000FF&t=la…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…dsystem.com/e/cm?lt1=_blank&bc1=000000&IS2=1&bg1=FFFFFF&fc1=000000&lc1=0000FF&…
…m/e/cm?lt1=_blank&bc1=000000&IS2=1&bg1=FFFFFF&fc1=000000&lc1=0000FF&t=lawgunan…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…m/e/cm?lt1=_blank&bc1=000000&IS2=1&bg1=FFFFFF&fc1=000000&lc1=0000FF&t=lawgunan…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…m/e/cm?lt1=_blank&bc1=000000&IS2=1&bg1=FFFFFF&fc1=000000&lc1=0000FF&t=lawgunan…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…66011&fc1=000000<1=_blank&lc1=3366FF&bg1=FFFFFF&f=ifr" marginwidth="0" margi…
…_blank&bc1=000000&IS2=1&bg1=FFFFFF&fc1=000000&lc1=0000FF&t=lawgunandmon-20&o=1…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…_blank&bc1=000000&IS2=1&bg1=FFFFFF&fc1=000000&lc1=0000FF&t=lawgunandmon-20&o=1…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…_blank&bc1=000000&IS2=1&bg1=FFFFFF&fc1=000000&lc1=0000FF&t=lawgunandmon-20&o=1…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…=14&l=bn1&mode=books&browse=3377866011&fc1=000000<1=_blank&lc1=3366FF&bg1=FF…
…000000&IS2=1&bg1=FFFFFF&fc1=000000&lc1=0000FF&t=lawgunandmon-20&o=1&p=8&l=as4&…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…000000&IS2=1&bg1=FFFFFF&fc1=000000&lc1=0000FF&t=lawgunandmon-20&o=1&p=8&l=as4&…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…000000&IS2=1&bg1=FFFFFF&fc1=000000&lc1=0000FF&t=lawgunandmon-20&o=1&p=8&l=as4&…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…rowse=3377866011&fc1=000000<1=_blank&lc1=3366FF&bg1=FFFFFF&f=ifr" marginwidt…
…2=1&bg1=FFFFFF&fc1=000000&lc1=0000FF&t=lawgunandmon-20&o=1&p=8&l=as4&m=amazon&…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…2=1&bg1=FFFFFF&fc1=000000&lc1=0000FF&t=lawgunandmon-20&o=1&p=8&l=as4&m=amazon&…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…2=1&bg1=FFFFFF&fc1=000000&lc1=0000FF&t=lawgunandmon-20&o=1&p=8&l=as4&m=amazon&…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…IS2=1&bg1=FFFFFF&fc1=000000&lc1=0000FF&t=lawgunandmon-20&o=1&p=8&l=as4&m=amazo…
…=000000&lc1=0000FF&t=lawgunandmon-20&o=1&p=8&l=as4&m=amazon&f=ifr&ref=ss_til&a…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…=000000&lc1=0000FF&t=lawgunandmon-20&o=1&p=8&l=as4&m=amazon&f=ifr&ref=ss_til&a…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…=000000&lc1=0000FF&t=lawgunandmon-20&o=1&p=8&l=as4&m=amazon&f=ifr&ref=ss_til&a…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…/rcm.amazon.com/e/cm?t=lawgunandmon-20&o=1&p=14&l=bn1&mode=books&browse=337786…
…000&lc1=0000FF&t=lawgunandmon-20&o=1&p=8&l=as4&m=amazon&f=ifr&ref=ss_til&asins…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…000&lc1=0000FF&t=lawgunandmon-20&o=1&p=8&l=as4&m=amazon&f=ifr&ref=ss_til&asins…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…000&lc1=0000FF&t=lawgunandmon-20&o=1&p=8&l=as4&m=amazon&f=ifr&ref=ss_til&asins…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
….amazon.com/e/cm?t=lawgunandmon-20&o=1&p=14&l=bn1&mode=books&browse=3377866011…
…lc1=0000FF&t=lawgunandmon-20&o=1&p=8&l=as4&m=amazon&f=ifr&ref=ss_til&asins=148…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…lc1=0000FF&t=lawgunandmon-20&o=1&p=8&l=as4&m=amazon&f=ifr&ref=ss_til&asins=148…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…lc1=0000FF&t=lawgunandmon-20&o=1&p=8&l=as4&m=amazon&f=ifr&ref=ss_til&asins=148…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…on.com/e/cm?t=lawgunandmon-20&o=1&p=14&l=bn1&mode=books&browse=3377866011&fc1=…
…00FF&t=lawgunandmon-20&o=1&p=8&l=as4&m=amazon&f=ifr&ref=ss_til&asins=148016368…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…00FF&t=lawgunandmon-20&o=1&p=8&l=as4&m=amazon&f=ifr&ref=ss_til&asins=148016368…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…00FF&t=lawgunandmon-20&o=1&p=8&l=as4&m=amazon&f=ifr&ref=ss_til&asins=148016368…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…0000FF&t=lawgunandmon-20&o=1&p=8&l=as4&m=amazon&f=ifr&ref=ss_til&asins=0813144…
…wgunandmon-20&o=1&p=8&l=as4&m=amazon&f=ifr&ref=ss_til&asins=1480163686" style=…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…wgunandmon-20&o=1&p=8&l=as4&m=amazon&f=ifr&ref=ss_til&asins=1480163686" style=…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…wgunandmon-20&o=1&p=8&l=as4&m=amazon&f=ifr&ref=ss_til&asins=1480163686" style=…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…00000<1=_blank&lc1=3366FF&bg1=FFFFFF&f=ifr" marginwidth="0" marginheight="0"…
…on-20&o=1&p=8&l=as4&m=amazon&f=ifr&ref=ss_til&asins=1480163686" style="width:1…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…on-20&o=1&p=8&l=as4&m=amazon&f=ifr&ref=ss_til&asins=1480163686" style="width:1…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…on-20&o=1&p=8&l=as4&m=amazon&f=ifr&ref=ss_til&asins=1480163686" style="width:1…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…ion=GetAdHtml&MarketPlace=US&source=ss&ref=ss_til&ad_type=product_link&trackin…
…&l=as4&m=amazon&f=ifr&ref=ss_til&asins=1480163686" style="width:120px;height:2…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…&l=as4&m=amazon&f=ifr&ref=ss_til&asins=1480163686" style="width:120px;height:2…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…&l=as4&m=amazon&f=ifr&ref=ss_til&asins=1480163686" style="width:120px;height:2…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…=amazon®ion=US&placement=B00JIV2ZT6&asins=B00JIV2ZT6&linkId=BKOFIGNR6MGH3TS…
<p><OBJECT classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="http:…
You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
…AE6D-11cf-96B8-444553540000" codebase="http://fpdownload.macromedia.com/get/fl…
You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
…t/flashplayer/current/swflash.cab" id="Player_4f5e2755-3436-4571-9358-59968bdc…
You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
…5-3436-4571-9358-59968bdcac46" WIDTH="160px" HEIGHT="600px"> <PARAM NAME="mov…
You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
…8-59968bdcac46" WIDTH="160px" HEIGHT="600px"> <PARAM NAME="movie" VALUE="http…
You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
…bdcac46" WIDTH="160px" HEIGHT="600px"> <PARAM NAME="movie" VALUE="http://ws.a…
You have used the element named above in your document, but the document type you are using does not define an element of that name. This error is often caused by:
…H="160px" HEIGHT="600px"> <PARAM NAME="movie" VALUE="http://ws.amazon.com/widg…
You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
…HT="600px"> <PARAM NAME="movie" VALUE="http://ws.amazon.com/widgets/q?rt=tf_cw…
You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
…tp://ws.amazon.com/widgets/q?rt=tf_cw&ServiceVersion=20070822&MarketPlace=US&I…
An entity reference was found in the document, but there is no reference by that name defined. Often this is caused by misspelling the reference name, unencoded ampersands, or by leaving off the trailing semicolon (;). The most common cause of this error is unencoded ampersands in URLs as described by the WDG in "Ampersands in URLs".
Entity references start with an ampersand (&) and end with a semicolon (;). If you want to use a literal ampersand in your document you must encode it as "&" (even inside URLs!). Be careful to end entity references with a semicolon or your entity reference may get interpreted in connection with the following text. Also keep in mind that named entity references are case-sensitive; &Aelig; and æ are different characters.
If this error appears in some markup generated by PHP's session handling code, this article has explanations and solutions to your problem.
Note that in most documents, errors related to entity references will trigger up to 5 separate messages from the Validator. Usually these will all disappear when the original problem is fixed.
…tp://ws.amazon.com/widgets/q?rt=tf_cw&ServiceVersion=20070822&MarketPlace=US&I…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
….com/widgets/q?rt=tf_cw&ServiceVersion=20070822&MarketPlace=US&ID=V20070822%2F…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
….com/widgets/q?rt=tf_cw&ServiceVersion=20070822&MarketPlace=US&ID=V20070822%2F…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
….com/widgets/q?rt=tf_cw&ServiceVersion=20070822&MarketPlace=US&ID=V20070822%2F…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…ttp://ws.amazon.com/widgets/q?rt=tf_cw&ServiceVersion=20070822&MarketPlace=US&…
…cw&ServiceVersion=20070822&MarketPlace=US&ID=V20070822%2FUS%2Flawgunandmon-20%…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…cw&ServiceVersion=20070822&MarketPlace=US&ID=V20070822%2FUS%2Flawgunandmon-20%…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…cw&ServiceVersion=20070822&MarketPlace=US&ID=V20070822%2FUS%2Flawgunandmon-20%…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…n=20070822&OneJS=1&Operation=GetAdHtml&MarketPlace=US&source=ss&ref=ss_til&ad_…
…erviceVersion=20070822&MarketPlace=US&ID=V20070822%2FUS%2Flawgunandmon-20%2F80…
An entity reference was found in the document, but there is no reference by that name defined. Often this is caused by misspelling the reference name, unencoded ampersands, or by leaving off the trailing semicolon (;). The most common cause of this error is unencoded ampersands in URLs as described by the WDG in "Ampersands in URLs".
Entity references start with an ampersand (&) and end with a semicolon (;). If you want to use a literal ampersand in your document you must encode it as "&" (even inside URLs!). Be careful to end entity references with a semicolon or your entity reference may get interpreted in connection with the following text. Also keep in mind that named entity references are case-sensitive; &Aelig; and æ are different characters.
If this error appears in some markup generated by PHP's session handling code, this article has explanations and solutions to your problem.
Note that in most documents, errors related to entity references will trigger up to 5 separate messages from the Validator. Usually these will all disappear when the original problem is fixed.
…erviceVersion=20070822&MarketPlace=US&ID=V20070822%2FUS%2Flawgunandmon-20%2F80…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…viceVersion=20070822&MarketPlace=US&ID=V20070822%2FUS%2Flawgunandmon-20%2F8010…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…viceVersion=20070822&MarketPlace=US&ID=V20070822%2FUS%2Flawgunandmon-20%2F8010…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…viceVersion=20070822&MarketPlace=US&ID=V20070822%2FUS%2Flawgunandmon-20%2F8010…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…ServiceVersion=20070822&MarketPlace=US&ID=V20070822%2FUS%2Flawgunandmon-20%2F8…
…-3436-4571-9358-59968bdcac46&Operation=GetDisplayTemplate"><PARAM NAME="qualit…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…-3436-4571-9358-59968bdcac46&Operation=GetDisplayTemplate"><PARAM NAME="qualit…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…-3436-4571-9358-59968bdcac46&Operation=GetDisplayTemplate"><PARAM NAME="qualit…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…gets/q?ServiceVersion=20070822&OneJS=1&Operation=GetAdHtml&MarketPlace=US&sour…
…8bdcac46&Operation=GetDisplayTemplate"><PARAM NAME="quality" VALUE="high"><PAR…
You have used the element named above in your document, but the document type you are using does not define an element of that name. This error is often caused by:
…te"><PARAM NAME="quality" VALUE="high"><PARAM NAME="bgcolor" VALUE="#FFFFFF"><…
You have used the element named above in your document, but the document type you are using does not define an element of that name. This error is often caused by:
…><PARAM NAME="bgcolor" VALUE="#FFFFFF"><PARAM NAME="allowscriptaccess" VALUE="…
You have used the element named above in your document, but the document type you are using does not define an element of that name. This error is often caused by:
…AME="allowscriptaccess" VALUE="always"><embed src="http://ws.amazon.com/widget…
You have used the element named above in your document, but the document type you are using does not define an element of that name. This error is often caused by:
…riptaccess" VALUE="always"><embed src="http://ws.amazon.com/widgets/q?rt=tf_cw…
You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
….com/widgets/q?rt=tf_cw&ServiceVersion=20070822&MarketPlace=US&ID=V20070822%2F…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
….com/widgets/q?rt=tf_cw&ServiceVersion=20070822&MarketPlace=US&ID=V20070822%2F…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
….com/widgets/q?rt=tf_cw&ServiceVersion=20070822&MarketPlace=US&ID=V20070822%2F…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…ttp://ws.amazon.com/widgets/q?rt=tf_cw&ServiceVersion=20070822&MarketPlace=US&…
…cw&ServiceVersion=20070822&MarketPlace=US&ID=V20070822%2FUS%2Flawgunandmon-20%…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…cw&ServiceVersion=20070822&MarketPlace=US&ID=V20070822%2FUS%2Flawgunandmon-20%…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…cw&ServiceVersion=20070822&MarketPlace=US&ID=V20070822%2FUS%2Flawgunandmon-20%…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…n=20070822&OneJS=1&Operation=GetAdHtml&MarketPlace=US&source=ss&ref=ss_til&ad_…
…viceVersion=20070822&MarketPlace=US&ID=V20070822%2FUS%2Flawgunandmon-20%2F8010…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…viceVersion=20070822&MarketPlace=US&ID=V20070822%2FUS%2Flawgunandmon-20%2F8010…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…viceVersion=20070822&MarketPlace=US&ID=V20070822%2FUS%2Flawgunandmon-20%2F8010…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…ServiceVersion=20070822&MarketPlace=US&ID=V20070822%2FUS%2Flawgunandmon-20%2F8…
…-3436-4571-9358-59968bdcac46&Operation=GetDisplayTemplate" id="Player_4f5e2755…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…-3436-4571-9358-59968bdcac46&Operation=GetDisplayTemplate" id="Player_4f5e2755…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…-3436-4571-9358-59968bdcac46&Operation=GetDisplayTemplate" id="Player_4f5e2755…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…gets/q?ServiceVersion=20070822&OneJS=1&Operation=GetAdHtml&MarketPlace=US&sour…
…ac46&Operation=GetDisplayTemplate" id="Player_4f5e2755-3436-4571-9358-59968bdc…
You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
…-3436-4571-9358-59968bdcac46" quality="high" bgcolor="#ffffff" name="Player_4f…
You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
…-59968bdcac46" quality="high" bgcolor="#ffffff" name="Player_4f5e2755-3436-457…
You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
…quality="high" bgcolor="#ffffff" name="Player_4f5e2755-3436-4571-9358-59968bdc…
You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
…-9358-59968bdcac46" allowscriptaccess="always" type="application/x-shockwave-…
You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
…c46" allowscriptaccess="always" type="application/x-shockwave-flash" align="m…
You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
…"application/x-shockwave-flash" align="middle" height="600px" width="160px"></…
You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
…hockwave-flash" align="middle" height="600px" width="160px"></embed></OBJECT> …
You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
…" align="middle" height="600px" width="160px"></embed></OBJECT> <NOSCRIPT><A H…
You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
…="middle" height="600px" width="160px"></embed></OBJECT> <NOSCRIPT><A HREF="ht…
You have used the element named above in your document, but the document type you are using does not define an element of that name. This error is often caused by:
…"600px" width="160px"></embed></OBJECT> <NOSCRIPT><A HREF="http://ws.amazon.co…
You may have neglected to close an element, or perhaps you meant to "self-close" an element, that is, ending it with "/>" instead of ">".
…<PARAM NAME="bgcolor" VALUE="#FFFFFF"><PARAM NAME="allowscriptaccess" VALUE="a…
…"600px" width="160px"></embed></OBJECT> <NOSCRIPT><A HREF="http://ws.amazon.co…
You may have neglected to close an element, or perhaps you meant to "self-close" an element, that is, ending it with "/>" instead of ">".
…e"><PARAM NAME="quality" VALUE="high"><PARAM NAME="bgcolor" VALUE="#FFFFFF"><P…
…"600px" width="160px"></embed></OBJECT> <NOSCRIPT><A HREF="http://ws.amazon.co…
You may have neglected to close an element, or perhaps you meant to "self-close" an element, that is, ending it with "/>" instead of ">".
…bdcac46&Operation=GetDisplayTemplate"><PARAM NAME="quality" VALUE="high"><PARA…
…"600px" width="160px"></embed></OBJECT> <NOSCRIPT><A HREF="http://ws.amazon.co…
You may have neglected to close an element, or perhaps you meant to "self-close" an element, that is, ending it with "/>" instead of ">".
…cac46" WIDTH="160px" HEIGHT="600px"> <PARAM NAME="movie" VALUE="http://ws.ama…
…th="160px"></embed></OBJECT> <NOSCRIPT><A HREF="http://ws.amazon.com/widgets/q…
You have used the element named above in your document, but the document type you are using does not define an element of that name. This error is often caused by:
…"></embed></OBJECT> <NOSCRIPT><A HREF="http://ws.amazon.com/widgets/q?rt=tf_cw…
You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
….com/widgets/q?rt=tf_cw&ServiceVersion=20070822&MarketPlace=US&ID=V20070822%2F…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
….com/widgets/q?rt=tf_cw&ServiceVersion=20070822&MarketPlace=US&ID=V20070822%2F…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
….com/widgets/q?rt=tf_cw&ServiceVersion=20070822&MarketPlace=US&ID=V20070822%2F…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…ttp://ws.amazon.com/widgets/q?rt=tf_cw&ServiceVersion=20070822&MarketPlace=US&…
…cw&ServiceVersion=20070822&MarketPlace=US&ID=V20070822%2FUS%2Flawgunandmon-20%…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…cw&ServiceVersion=20070822&MarketPlace=US&ID=V20070822%2FUS%2Flawgunandmon-20%…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…cw&ServiceVersion=20070822&MarketPlace=US&ID=V20070822%2FUS%2Flawgunandmon-20%…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…n=20070822&OneJS=1&Operation=GetAdHtml&MarketPlace=US&source=ss&ref=ss_til&ad_…
…viceVersion=20070822&MarketPlace=US&ID=V20070822%2FUS%2Flawgunandmon-20%2F8010…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…viceVersion=20070822&MarketPlace=US&ID=V20070822%2FUS%2Flawgunandmon-20%2F8010…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…viceVersion=20070822&MarketPlace=US&ID=V20070822%2FUS%2Flawgunandmon-20%2F8010…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…ServiceVersion=20070822&MarketPlace=US&ID=V20070822%2FUS%2Flawgunandmon-20%2F8…
…-3436-4571-9358-59968bdcac46&Operation=NoScript">Amazon.com Widgets</A></NOSCR…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…-3436-4571-9358-59968bdcac46&Operation=NoScript">Amazon.com Widgets</A></NOSCR…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…-3436-4571-9358-59968bdcac46&Operation=NoScript">Amazon.com Widgets</A></NOSCR…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…gets/q?ServiceVersion=20070822&OneJS=1&Operation=GetAdHtml&MarketPlace=US&sour…
…571-9358-59968bdcac46&Operation=NoScript">Amazon.com Widgets</A></NOSCRIPT></p>
You have used the element named above in your document, but the document type you are using does not define an element of that name. This error is often caused by:
…://www.lijit.com/delivery/fp?u=farlio&z=58835&n=1" type="text/javascript"></sc…
An entity reference was found in the document, but there is no reference by that name defined. Often this is caused by misspelling the reference name, unencoded ampersands, or by leaving off the trailing semicolon (;). The most common cause of this error is unencoded ampersands in URLs as described by the WDG in "Ampersands in URLs".
Entity references start with an ampersand (&) and end with a semicolon (;). If you want to use a literal ampersand in your document you must encode it as "&" (even inside URLs!). Be careful to end entity references with a semicolon or your entity reference may get interpreted in connection with the following text. Also keep in mind that named entity references are case-sensitive; &Aelig; and æ are different characters.
If this error appears in some markup generated by PHP's session handling code, this article has explanations and solutions to your problem.
Note that in most documents, errors related to entity references will trigger up to 5 separate messages from the Validator. Usually these will all disappear when the original problem is fixed.
…://www.lijit.com/delivery/fp?u=farlio&z=58835&n=1" type="text/javascript"></sc…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…//www.lijit.com/delivery/fp?u=farlio&z=58835&n=1" type="text/javascript"></scr…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…//www.lijit.com/delivery/fp?u=farlio&z=58835&n=1" type="text/javascript"></scr…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…//www.lijit.com/delivery/fp?u=farlio&z=58835&n=1" type="text/javascript"></scr…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…p://www.lijit.com/delivery/fp?u=farlio&z=58835&n=1" type="text/javascript"></s…
…ijit.com/delivery/fp?u=farlio&z=58835&n=1" type="text/javascript"></script></d…
An entity reference was found in the document, but there is no reference by that name defined. Often this is caused by misspelling the reference name, unencoded ampersands, or by leaving off the trailing semicolon (;). The most common cause of this error is unencoded ampersands in URLs as described by the WDG in "Ampersands in URLs".
Entity references start with an ampersand (&) and end with a semicolon (;). If you want to use a literal ampersand in your document you must encode it as "&" (even inside URLs!). Be careful to end entity references with a semicolon or your entity reference may get interpreted in connection with the following text. Also keep in mind that named entity references are case-sensitive; &Aelig; and æ are different characters.
If this error appears in some markup generated by PHP's session handling code, this article has explanations and solutions to your problem.
Note that in most documents, errors related to entity references will trigger up to 5 separate messages from the Validator. Usually these will all disappear when the original problem is fixed.
…ijit.com/delivery/fp?u=farlio&z=58835&n=1" type="text/javascript"></script></d…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…jit.com/delivery/fp?u=farlio&z=58835&n=1" type="text/javascript"></script></di…
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
…jit.com/delivery/fp?u=farlio&z=58835&n=1" type="text/javascript"></script></di…
This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
…jit.com/delivery/fp?u=farlio&z=58835&n=1" type="text/javascript"></script></di…
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
…lijit.com/delivery/fp?u=farlio&z=58835&n=1" type="text/javascript"></script></…
…s1-1001" class="cpi cpi-s1" affiliate="" tracking="lefarkins" color="" source=…
You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
…ss="cpi cpi-s1" affiliate="" tracking="lefarkins" color="" source="shop:lefark…
You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
…filiate="" tracking="lefarkins" color="" source="shop:lefarkins" width="160" h…
You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
… tracking="lefarkins" color="" source="shop:lefarkins" width="160" height="200…
You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
…olor="" source="shop:lefarkins" width="160" height="200">Make <a href="ht…
You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
…e="shop:lefarkins" width="160" height="200">Make <a href="http://www.cafe…
You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
…tent/uploads/2012/09/oldfashionedrevisedandsharpened-e1348603402357.jpg"></div>
The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type
are
type="text/css"
for <style>
and type="text/javascript"
for <script>
.
…tent/uploads/2012/09/oldfashionedrevisedandsharpened-e1348603402357.jpg"></div>
You may have neglected to close an element, or perhaps you meant to "self-close" an element, that is, ending it with "/>" instead of ">".
…dget_text"> <div class="textwidget"><img src="http://www.lawyersgunsmoneyblo…
…an></h3> <div class="textwidget"><li><A href="http://delong.typepad.com/">Br…
The mentioned element is not allowed to appear in the context in which you've placed it; the other mentioned elements are the only ones that are both allowed there and can contain the element mentioned. This might mean that you need a containing element, or possibly that you've forgotten to close a previous element.
One possible cause for this message is that you have attempted to put a block-level element (such as "<p>" or "<table>") inside an inline element (such as "<a>", "<span>", or "<font>").
… <div class="textwidget"><li><A href="http://delong.typepad.com/">Brad Delong…
You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
…lass="textwidget"><li><A href="http://delong.typepad.com/">Brad Delong</A></li>
You have used the element named above in your document, but the document type you are using does not define an element of that name. This error is often caused by:
<li><A href="http://www.crookedtimber.org/">Crooked Timber</A></li>
The mentioned element is not allowed to appear in the context in which you've placed it; the other mentioned elements are the only ones that are both allowed there and can contain the element mentioned. This might mean that you need a containing element, or possibly that you've forgotten to close a previous element.
One possible cause for this message is that you have attempted to put a block-level element (such as "<p>" or "<table>") inside an inline element (such as "<a>", "<span>", or "<font>").
<li><A href="http://www.crookedtimber.org/">Crooked Timber</A></li>
You have used the element named above in your document, but the document type you are using does not define an element of that name. This error is often caused by:
<li><A href="http://dailykos.com/">Daily Kos</A></li>
The mentioned element is not allowed to appear in the context in which you've placed it; the other mentioned elements are the only ones that are both allowed there and can contain the element mentioned. This might mean that you need a containing element, or possibly that you've forgotten to close a previous element.
One possible cause for this message is that you have attempted to put a block-level element (such as "<p>" or "<table>") inside an inline element (such as "<a>", "<span>", or "<font>").
<li><A href="http://dailykos.com/">Daily Kos</A></li>
You have used the element named above in your document, but the document type you are using does not define an element of that name. This error is often caused by:
<li><A href="http://www.wired.com/dangerroom/">Danger Room</A></li>
The mentioned element is not allowed to appear in the context in which you've placed it; the other mentioned elements are the only ones that are both allowed there and can contain the element mentioned. This might mean that you need a containing element, or possibly that you've forgotten to close a previous element.
One possible cause for this message is that you have attempted to put a block-level element (such as "<p>" or "<table>") inside an inline element (such as "<a>", "<span>", or "<font>").
<li><A href="http://www.wired.com/dangerroom/">Danger Room</A></li>
You have used the element named above in your document, but the document type you are using does not define an element of that name. This error is often caused by:
<li><A href="http://www.eschatonblog.com/">Eschaton</A></li>
The mentioned element is not allowed to appear in the context in which you've placed it; the other mentioned elements are the only ones that are both allowed there and can contain the element mentioned. This might mean that you need a containing element, or possibly that you've forgotten to close a previous element.
One possible cause for this message is that you have attempted to put a block-level element (such as "<p>" or "<table>") inside an inline element (such as "<a>", "<span>", or "<font>").
<li><A href="http://www.eschatonblog.com/">Eschaton</A></li>
You have used the element named above in your document, but the document type you are using does not define an element of that name. This error is often caused by:
<li><A href="http://voices.washingtonpost.com/ezra-klein/">Ezra Klein</A></li>
The mentioned element is not allowed to appear in the context in which you've placed it; the other mentioned elements are the only ones that are both allowed there and can contain the element mentioned. This might mean that you need a containing element, or possibly that you've forgotten to close a previous element.
One possible cause for this message is that you have attempted to put a block-level element (such as "<p>" or "<table>") inside an inline element (such as "<a>", "<span>", or "<font>").
<li><A href="http://voices.washingtonpost.com/ezra-klein/">Ezra Klein</A></li>
You have used the element named above in your document, but the document type you are using does not define an element of that name. This error is often caused by:
<li><A href="http://feministe.us/blog/">Feministe</A></li>
The mentioned element is not allowed to appear in the context in which you've placed it; the other mentioned elements are the only ones that are both allowed there and can contain the element mentioned. This might mean that you need a containing element, or possibly that you've forgotten to close a previous element.
One possible cause for this message is that you have attempted to put a block-level element (such as "<p>" or "<table>") inside an inline element (such as "<a>", "<span>", or "<font>").
<li><A href="http://feministe.us/blog/">Feministe</A></li>
You have used the element named above in your document, but the document type you are using does not define an element of that name. This error is often caused by:
<li><A href="http://talkingpointsmemo.com/">Talking Points Memo</A></li>
The mentioned element is not allowed to appear in the context in which you've placed it; the other mentioned elements are the only ones that are both allowed there and can contain the element mentioned. This might mean that you need a containing element, or possibly that you've forgotten to close a previous element.
One possible cause for this message is that you have attempted to put a block-level element (such as "<p>" or "<table>") inside an inline element (such as "<a>", "<span>", or "<font>").
<li><A href="http://talkingpointsmemo.com/">Talking Points Memo</A></li>
You have used the element named above in your document, but the document type you are using does not define an element of that name. This error is often caused by:
<li><A href="http://feministing.com/">Feministing</A></li>
The mentioned element is not allowed to appear in the context in which you've placed it; the other mentioned elements are the only ones that are both allowed there and can contain the element mentioned. This might mean that you need a containing element, or possibly that you've forgotten to close a previous element.
One possible cause for this message is that you have attempted to put a block-level element (such as "<p>" or "<table>") inside an inline element (such as "<a>", "<span>", or "<font>").
<li><A href="http://feministing.com/">Feministing</A></li>
You have used the element named above in your document, but the document type you are using does not define an element of that name. This error is often caused by:
<li><A href="http://www.salon.com/opinion/greenwald/">Glenn Greenwald</A></li>
The mentioned element is not allowed to appear in the context in which you've placed it; the other mentioned elements are the only ones that are both allowed there and can contain the element mentioned. This might mean that you need a containing element, or possibly that you've forgotten to close a previous element.
One possible cause for this message is that you have attempted to put a block-level element (such as "<p>" or "<table>") inside an inline element (such as "<a>", "<span>", or "<font>").
<li><A href="http://www.salon.com/opinion/greenwald/">Glenn Greenwald</A></li>
You have used the element named above in your document, but the document type you are using does not define an element of that name. This error is often caused by:
<li><A href="http://juancole.com/">Juan Cole</A></li>
The mentioned element is not allowed to appear in the context in which you've placed it; the other mentioned elements are the only ones that are both allowed there and can contain the element mentioned. This might mean that you need a containing element, or possibly that you've forgotten to close a previous element.
One possible cause for this message is that you have attempted to put a block-level element (such as "<p>" or "<table>") inside an inline element (such as "<a>", "<span>", or "<font>").
<li><A href="http://juancole.com/">Juan Cole</A></li>
You have used the element named above in your document, but the document type you are using does not define an element of that name. This error is often caused by:
<li><A href="http://www.themonkeycage.org/">Monkey Cage</A></li>
The mentioned element is not allowed to appear in the context in which you've placed it; the other mentioned elements are the only ones that are both allowed there and can contain the element mentioned. This might mean that you need a containing element, or possibly that you've forgotten to close a previous element.
One possible cause for this message is that you have attempted to put a block-level element (such as "<p>" or "<table>") inside an inline element (such as "<a>", "<span>", or "<font>").
<li><A href="http://www.themonkeycage.org/">Monkey Cage</A></li>
You have used the element named above in your document, but the document type you are using does not define an element of that name. This error is often caused by:
…prose"><img src="http://www.blogads.com/advertise/the_liberal_prose/logo" ></a>
The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type
are
type="text/css"
for <style>
and type="text/javascript"
for <script>
.
…prose"><img src="http://www.blogads.com/advertise/the_liberal_prose/logo" ></a>
You may have neglected to close an element, or perhaps you meant to "self-close" an element, that is, ending it with "/>" instead of ">".
…gads.com/advertise/the_liberal_prose"><img src="http://www.blogads.com/adverti…
</ul>
You may have neglected to close an element, or perhaps you meant to "self-close" an element, that is, ending it with "/>" instead of ">".
…dget_text"> <div class="textwidget"><p><a href="http://web.blogads.com/adver…
</ul>
You may have neglected to close an element, or perhaps you meant to "self-close" an element, that is, ending it with "/>" instead of ">".
…ext-21" class="widget widget_text"> <div class="textwidget"><p><a href="http…
</ul>
You may have neglected to close an element, or perhaps you meant to "self-close" an element, that is, ending it with "/>" instead of ">".
<li id="text-21" class="widget widget_text"> <div class="textwidget"><p><a hr…
</li>
The Validator found an end tag for the above element, but that element is not currently open. This is often caused by a leftover end tag from an element that was removed during editing, or by an implicitly closed element (if you have an error related to an element being used where it is not allowed, this is almost certainly the case). In the latter case this error will disappear as soon as you fix the original problem.
If this error occurred in a script section of your document, you should probably read this FAQ entry.
</ul>
The Validator found an end tag for the above element, but that element is not currently open. This is often caused by a leftover end tag from an element that was removed during editing, or by an implicitly closed element (if you have an error related to an element being used where it is not allowed, this is almost certainly the case). In the latter case this error will disappear as soon as you fix the original problem.
If this error occurred in a script section of your document, you should probably read this FAQ entry.
</ul>
Most likely, you nested tags and closed them in the wrong order. For example <p><em>...</p> is not acceptable, as <em> must be closed before <p>. Acceptable nesting is: <p><em>...</em></p>
Another possibility is that you used an element which requires a child element that you did not include. Hence the parent element is "not finished", not complete. For instance, in HTML the <head> element must contain a <title> child element, lists require appropriate list items (<ul> and <ol> require <li>; <dl> requires <dt> and <dd>), and so on.
</ul>
Most likely, you nested tags and closed them in the wrong order. For example <p><em>...</p> is not acceptable, as <em> must be closed before <p>. Acceptable nesting is: <p><em>...</em></p>
Another possibility is that you used an element which requires a child element that you did not include. Hence the parent element is "not finished", not complete. For instance, in HTML the <head> element must contain a <title> child element, lists require appropriate list items (<ul> and <ol> require <li>; <dl> requires <dt> and <dd>), and so on.
</div>
The Validator found an end tag for the above element, but that element is not currently open. This is often caused by a leftover end tag from an element that was removed during editing, or by an implicitly closed element (if you have an error related to an element being used where it is not allowed, this is almost certainly the case). In the latter case this error will disappear as soon as you fix the original problem.
If this error occurred in a script section of your document, you should probably read this FAQ entry.