- published: 24 Aug 2016
- views: 54
When oil is brought to surface conditions it is usual for some natural gas to come out of solution. The gas/oil ratio (GOR) is the ratio of the volume of gas that comes out of solution, to the volume of oil at standard conditions.
A point to check is whether the volume of oil is measured before or after the gas comes out of solution, since the oil volume will shrink when the gas comes out.
In fact gas dissolution and oil volume shrinkage will happen at many stages during the path of the hydrocarbon stream from reservoir through the wellbore and processing plant to export. For light oils and rich gas condensates the ultimate GOR of export streams is strongly influenced by the efficiency with which the processing plant strips liquids from the gas phase. Reported GORs may be calculated from export volumes which may not be at standard conditions.
The GOR is a dimensionless ratio (volume per volume) in metric units, but in field units, it is usually measured in cubic feet of gas per barrel of oil or condensate.
how to mix oil with gas for Johnson 90 hp 2 cycle outboard? Picture slide show click here (7m0s) I use cool grip plastic measurement cup to mix gas with 2 cycle engine oil from SuperTech (bought from walmart) and West Marine Premium 2 cycle both TC-W3 oil for 2 cycle engines. I also add seafoam to clean the engine carburetor. Few people use 2 cycle engines. 20 years from now, everything will be 4 cycle engines - LOL
If your outdoor equipment has a 2-cycle engine, it runs on a mixture of oil and gas. Here’s how to properly mix the fuel. For more tips and tutorials about gas powered equipment from Remington Power Tools, please visit: Remington Gas Equipment: http://remingtonpowertools.com/how-to/tag/gas-equipment/ Product Manuals: http://remingtonpowertools.com/Manuals How-To's & Tips: http://remingtonpowertools.com/how-to/
Thanks for watching! 100% shot with GoPro CHECK OUT OUR SPONSORS: http://www.prostylemx.com/ https://www.facebook.com/GroundedFears?fref=ts Like Facebook Pages: https://www.facebook.com/pages/MacDonaldrider14/1554148391491524?ref=hl https://www.facebook.com/pages/Motocross-Lifestyle-Apparel/1462532227378827 Check out the channels! - http://www.youtube.com/user/MacDonaldrider14 https://www.youtube.com/channel/UCmA4pJ1Q5xK3UHjMdk5o1cw https://www.youtube.com/channel/UCoN1b6163Zrp2TcdxCJIjdA Instagram : www.instagram.com/macdonaldrider14 www.instagram.com/motocross_lifestyle_apparel Fo...
Product Description Troy-Bilt TB146 EC 29cc 4-Cycle NO MIX OIL AND GAS Cultivator with JumpStart Technology The Troy-Bilt TB146 EC is a powerful and versatile cultivator designed to cultivate flower beds and vegetable gardens. A 29cc 4-cycle engine powers a die-cast 40:1 gearbox which turns six premium eight-bladed tines. The tines can be adjusted to cultivate rows in widths of 6 inches, 9 inches and 12 inches. Transport wheels allow for maneuverability and transport. SpringAssist technology and JumpStart capability included in the engine make starting easier. Backed by a 2-year warranty. Read more : http://www.amazon.com/dp/B0042ZCIWW/?tag=allabolattec-20
The U.S. distress ratio rose to 33.9% in February, a level last surpassed in July 2009 during the recession, when the ratio fluctuated from 14.6% to a staggering 70%. The oil & gas sector accounted for 29% of total distressed debt while the metals, mining, and steel sector had the highest ratio at 84.2%. In this CreditMatters TV segment, Associate Director Gregg Moskowitz explains the key trends and data points.
How to mix 2 stroke engine oil with gas using the mixing container.
Showing what my Oil Pressure and Wideband Air Fuel Ratio Gauges do at different times. How the Air fuel ratio & Oil Pressure fluctuates throughout different driving styles. The Wideband Air/Fuel Ratio gauge uses an included, Bosch LSU 4.9 wideband oxygen sensor. NOTE: THE GAUGES FLICKER FROM THE CAMERA VIEW, DOES NOT DO THAT TO THE NAKED EYE! Like My Facebook Page!!! Several Pictures & Videos NOT shown on YouTube or anywhere else! https://www.facebook.com/MikeAnthonyAutosports
PVT Modeling is the process of describing the phase behavior of hydrocarbon fluids by mathematical equations (i.e.; EOS) based on lab measurements. Usually, the EOS needs to be matched with lab data by changing the pseudo-components' properties which are considered as tuning parameters due to their low reliability. However, the tuning process can be complicated and challenging. Hence, in this series, important techniques are given to achieve matching properly using PVTP v.11 (IPM v.9.0) software (for an oil sample provided by McCAIN in Chp 10) by dividing this process into four projects as following: 1. Saturation Pressure Project: The Pb and oil density at Pb are matched with AAE less than 1%. (Lecture 1). 2. CCE Project: The Vrel is matched with AAE less than 1%. (Lecture 2). 3. DLE Pr...
Pump Fiction | Originally broadcast November 2, 2012 The price for premium gas blends is as much as 15 cents more per litre than regular gas. Gas companies make the pitch that premium's better for your car. While it's true that some car makers recommend putting premium fuel in their high-end models, what about most of us who drive regular cars? For more: http://www.cbc.ca/marketplace/episodes/2012-2013/pump-fiction »»» Subscribe to CBC News to watch more videos: https://www.youtube.com/user/cbcnews?sub_confirmation=1 Connect with CBC News Online: For breaking news, video, audio and in-depth coverage: http://www.cbcnews.ca Find CBC News on Facebook: https://www.facebook.com/cbcnews Follow CBC News on Twitter: https://twitter.com/cbcnews For breaking news on Twitter: https://twitter.com/...
Enjoy watching a compilation of the Oil and Gas Tanker Wagon Trains used across the Indian Railways network to transport Oil and Gas from Harbors to refinery's and Oil Corporations. India ranks third in oil consumption with 195.5 million tons in 2015 after USA and China.These trains run on Priority as compared to other Freight Trains as the demand for Supply of Oil and Gas is never ending specially for the Automobiles to keep running. There are 3 Types of Tanker Wagons in use : BTPN (Green Tankers) : Bogie Tank Wagon. This wagon was designed in 1986 for transportation of petroleum products i.e. Kerosene, petrol, diesel and naphtha. Axle Load 20.321. CASNUB 22 NLB bogie. Speed 80/80 Kmph. BTFLN (Green Tankers) : Improved version of BTPN, designed to increase the pay load. This tank...
GROW HEMP 4 GASOLINE / FUEL / GAS Go Green With Hemp Create 100 Million GREEN JOBS in 6 months Hemp Seed Oil Biodiesel fuel Hemp seed oil can be used as is in bio-diesel engines. Methyl esters, or bio-diesel, can be made from any oil or fat including hemp seed oil. The reaction requires the oil, an alcohol (usually methanol), and a catalyst, which produces bio-diesel and small amount of glycerol or glycerin. When co-fired with 15% methanol, bio-diesel fuel produces energy less than 1/3 as pollution as petroleum diesel. Energy and Fuel from Hemp Stalks through Pyrolysis Pyrolysis is the technique of applying high heat to biomass, or organic plants and tree matter, with little or no air. Reduced emissions from coal-fired power plants and automobiles can be accomplished by converting bio...
PVT Modeling is the process of describing the phase behavior of hydrocarbon fluids by mathematical equations (i.e.; EOS) based on lab measurements. Usually, the EOS needs to be matched with lab data by changing the pseudo-components' properties which are considered as tuning parameters due to their low reliability. However, the tuning process can be complicated and challenging. Hence, in this series, important techniques are given to achieve matching properly using PVTP v.11 (IPM v.9.0) software (for an oil sample provided by McCAIN in Chp 10) by dividing this process into four projects as following: 1. Saturation Pressure Project: The Pb and oil density at Pb are matched with AAE less than 1%. (Lecture 1). 2. CCE Project: The Vrel is matched with AAE less than 1%. (Lecture 2). 3. DLE Pr...
PVT Modeling is the process of describing the phase behavior of hydrocarbon fluids by mathematical equations (i.e.; EOS) based on lab measurements. Usually, the EOS needs to be matched with lab data by changing the pseudo-components' properties which are considered as tuning parameters due to their low reliability. However, the tuning process can be complicated and challenging. Hence, in this series, important techniques are given to achieve matching properly using PVTP v.11 (IPM v.9.0) software (for an oil sample provided by McCAIN in Chp 10) by dividing this process into four projects as following: 1. Saturation Pressure Project: The Pb and oil density at Pb are matched with AAE less than 1%. (Lecture 1). 2. CCE Project: The Vrel is matched with AAE less than 1%. (Lecture 2). 3. DLE Pr...
PVT Modeling is the process of describing the phase behavior of hydrocarbon fluids by mathematical equations (i.e.; EOS) based on lab measurements. Usually, the EOS needs to be matched with lab data by changing the pseudo-components' properties which are considered as tuning parameters due to their low reliability. However, the tuning process can be complicated and challenging. Hence, in this series, important techniques are given to achieve matching properly using PVTP v.11 (IPM v.9.0) software (for an oil sample provided by McCAIN in Chp 10) by dividing this process into four projects as following: 1. Saturation Pressure Project: The Pb and oil density at Pb are matched with AAE less than 1%. (Lecture 1). 2. CCE Project: The Vrel is matched with AAE less than 1%. (Lecture 2). 3. DLE Pr...
Click Here To Subscribe! ► http://bit.ly/JOovvU - I have been looking forward to this for a long time! I brought along the 5th scale boss to give me a hand in filming and tuning - and I can say this truck is gunna be a beast! Yes, Tuning it takes some time - especially at this elevation - and like any new vehicle - We need to learn what we are doing! I know a lot of folks ask me to give information in the video description, so here it is: Horizon Hobby Product Link: http://bit.ly/ZzMMOk Key Features Innovative .31 cubic inch GASOLINE engine AVC™ (Active Vehicle Control™) equipped Full 4WD capabilities Waterproof electronics Extended length XXL chassis with red anodized chassis plates Ultra-durable suspension and oversized shocks Spektrum™ DX2E DSMR™ 2.4GHz radio system Included Comes ...
Inert gas is the gas which contains insufficient oxygen (normally less then 8 %) to suppress combustion of flammable hydrocarbon gases. Inert gas system spreads the inert gas over the oil cargo hydrocarbon mixture which increases the lower explosion limit LEL (lower concentration at which the vapors can be ignited), simultaneously decreasing the Higher explosion limit HEL (Higher concentration at which vapor explodes). When the concentration reaches around 10 %, an atmosphere is created inside tank in which hydrocarbon vapors cannot burn. The concentration of inert gas is kept around 5% as a safety limit.