Mount Panorama, Motor Racing Circuit Bathurst (or often simply Bathurst) is a motor racing track located in Bathurst, New South Wales, Australia. It is the home of the Bathurst 12 Hour motor race, held each February, and the Bathurst 1000 motor race, held each October. The track is 6.213 km (4 mi) long, and is technically a street circuit, as the circuit is a public road when no racing events are being run, and there are many residences which can only be accessed from the circuit.

The track is an unusual design by modern standards, with a 174 metre (570 foot) vertical difference between its highest and lowest points, and grades as steep as 1:6.13. From the start-finish line, the track can be viewed in three sections; the short pit straight and then a tight left turn into the long, steep Mountain straight; the tight, narrow section across the top of the mountain itself; and then the long, downhill section of Conrod Straight, with the very fast Chase and the turn back onto pit straight to complete the lap.

Mount may refer to:

Pan and panning can have many meanings as listed below in various categories.

The acronym PAN can refer to:

A screw, or bolt, is a type of fastener characterized by a helical ridge, known as an external thread or just thread, wrapped around a cylinder. Some screw threads are designed to mate with a complementary thread, known as an internal thread, often in the form of a nut or an object that has the internal thread formed into it. Other screw threads are designed to cut a helical groove in a softer material as the screw is inserted. The most common uses of screws are to hold objects together and to position objects.

Often screws have a head, which is a specially formed section on one end of the screw that allows it to be turned, or driven. Common tools for driving screws include screwdrivers and wrenches. The head is usually larger than the body of the screw, which keeps the screw from being driven deeper than the length of the screw and to provide a bearing surface. There are exceptions; for instance, carriage bolts have a domed head that is not designed to be driven; set screws have a head smaller than the outer diameter of the screw; J-bolts have a J-shaped head which is not designed to be driven, but rather is usually sunk into concrete allowing it to be used as an anchor bolt. The cylindrical portion of the screw from the underside of the head to the tip is known as the shank; it may be fully threaded or partially threaded. The distance between each thread is called the "pitch".