- published: 06 Nov 2013
- views: 61620
Create your page here
Sunday, 16 October 2016
-
remove the playlistWhittling
- remove the playlistWhittling
back to playlist
http://www.korduroy.tv
Episode 12
Whittling is pretty much as ancient as humans, and has provided a means for expression both artistic and functional. Whether it is for meditative reasons or that you are just looking kill some time, whittling is one of the cheapest and most accessible hobbies one can find. All you need is wood, a knife, and a little bit of inspiration on what to make.
In this episode of D-I-Why Not? presented by Leatherman, our friend James shows us some of the basics in starting your first whittling project.
Introduction to Whittling:
1. Acquire your wood - A local woodworker, furniture builder, or cabinetmaker is a great resource for this. They have contacts to solid wood sources, or, if you're lucky, will share some of their scrap pieces.
2. Study the grain of the wood - All wood has grain that runs a certain direction; the grain is the flow of the wood.
3. When you begin to whittle, always cut with the grain or across the grain of the wood. NEVER cut against the grain, or you will risk splintering your wood.
4. Study your piece of wood and try to find your desired shape within that piece.
5. Draw the outline of your design on the wood with a pencil or marker, to give yourself a goal.
6. Before you get started, familiarize yourself with these four basic whittling strokes:
- Traditional Push Cut- Lops off large chunks of wood at a time
- Stabilizing Thumb Push Cut- Gives you more control and precision for smaller cuts
- Channel Cut or 'V' Cut- Stroke on one side and back again, either sloped or sloped straight
- Paring Cut-Used for very fine detailing. Somewhat risky. Bloody fingers may ensue. Use extreme caution.
7. You are now ready to get your knife dirty! Rough out your design, by quickly but carefully removing excess chunks of wood. The Traditional Push Cut is best for this step.
8. Find somewhere comfortable (you're gonna be here awhile) and whittle away! Utilize the different strokes when needed in your project. If it feels right, go with it. If it's hard, consider another stroke.
9. Keep working until your design pops out of the wood.
10. Now you're ready to sand. Use four different grits of sandpaper, from 60 on up to 200. Be sure to keep a bandana nearby, to clean shavings off wood between sanding.
11. Coat your finished wood with Mineral Oil to preserve and shine up your project. Make sure the oil is food grade and use a few coats.
12. Enjoy your homemade piece! Bask in the sensation of making your own beautiful wood creations!
Tips as You Whittle:
1. Slow is Smooth and Smooth is Fast
2. The Best Second Chance is a Good First Chance
3. Patience Now Saves Headaches Later
4. Give your Project some Space when it Drives You Nuts: Breaks are Necessary
5. Safety First!!
Host
Idle Theory Bus
Camera
Rachel Goldfarb
Edit
James Campbell
Music
"You Don't Know My Mind"
Smokey Hormel
©2013 KorduroyTV
eCountryLifestyle introduces you to Berry Williams who is primarily a wood whittler whos been whittling for more years than he cares to count. He claims not to be a wood carver, as being a wood carver requires having talent and expensive tools. Berry likes to whittle primarily using his pocket knife and a type of wood called Bass wood, which is reasonably firm and not very grainy. In this video he shows you how to make a Christmas Star using a more expensive Chip Carving knife, stressing you should always keep your knives super sharp and take your time to avoid accidents. If you like working with your hands and if you like working with wood, Berry recommends giving whittling a try, its a lot of fun!
- published: 05 Feb 2009
- views: 265529
In this tutorial I am going to show you how to forge 3 carving knives from drill bits and files.
The forge used here was made from NightHawkInLight's tutorial: https://www.youtube.com/watch?v=jBVa2bw3r_k
My drill bit knife tutorial: https://www.youtube.com/watch?v=Rxo0G39ETt8
How I made the forge:https://www.youtube.com/watch?v=bmbZMtk7X80
All music was used with permission from the creator and is royalty free.
Intro music by: Lino Rise
Title: "Cypress"
Source: www.free-intro-music.com
Licenced under Creative Commons by Attribution 3.0
outro music: DM Galaxy - Paralyzed (Disfigure Remix) [NCS Release]
By Disfigure: https://soundcloud.com/disfigureofficial
NCS video: https://www.youtube.com/watch?v=3gM612nH8Yo&list;=UU_aEa8K-EOJ3D6gOs7HcyNg
Main music in the video by dano : http://www.danosongs.com/#music
Disclaimer:
I hold no responsibility for any damage, injury, or death caused if you try to re create or use any of the weapons or projects seen on any of my videos. By attempting to do anything seen on my channel the user is completely responsible for any consequences caused by his/her actions. If you do make these weapons be safe and always wear eye protection when using them – (if necessary) and always use these weapons in a safe and controlled environment where no one is in danger because of your actions!
don’t be an idiot!
there may be dangers that i am not aware of when making these weapons.
I make these weapons because I am interested in the methods and engineering of them but I am NOT at all interested in using them for hunting or hurting people! (but they may be useful in the coming zombie apocalypse!) Any of the weapons or processes on my channel could be dangerous if attempted.
Thank you so much to my patrons!
They helped make this video possible!
Daniel Wiegert
kubeek
Oliver Lorrance
Stephan Burlot
Davidstgelais
Kieran Harkin
Larry Kuszmaul
Sam Carter
Villads Møller
If you want to help support my videos then please visit this link and consider donating!
https://www.patreon.com/TheArtOfWeapons
- published: 16 May 2015
- views: 354417
I've been in a woodworking funk these past few weekends. Unable to really find an inspired project. So I decided to get a small chunk of wood and start whittling...something I haven't done since I was a kid. It's an invigorating exercise! So if you are at a loss for something to do, try whittling! It's asy and requires nothing more than a pocket knife and a block of pine.
- published: 07 Mar 2010
- views: 69736
Barnaby Carder - who calls himself Barn the Spoon - spends his days sitting in a London shopfront, painstakingly whittling wooden spoons.
After being apprenticed to a wooden furniture maker, he spent three years travelling around forests - sleeping in the woods and carving spoons from the trees.
He ended up saving enough money to open his tiny shop in Hackney last year, from which he creates the spoons using timber harvested from Tower Hamlets Cemetery Park.
- published: 10 May 2013
- views: 181297
Woodcarving (whittling) an otter with a victorinox swiss army knife. (hiker model)
Woodcarving by Aaron Pierre
Gymnopedie No. 2 Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0 License
http://creativecommons.org/licenses/b...
- published: 10 Mar 2016
- views: 2668
a short chat about the classic slip joint whittling knives..thanks for all your support..safe journeys
- published: 19 Nov 2015
- views: 5066
FACE CARVING,Woodcarving from basswood with my Oar Carver.Also cutting a carving blank on the bandsaw...
- published: 27 Feb 2014
- views: 36228
Whittling
Whittling may refer either to the art of carving shapes out of raw wood using a knife or a time-occupying, non-artistic process of repeatedly shaving slivers from a piece of wood.
Background
Casual whittling is typically performed with a light, small-bladed knife, usually a pocket knife.
Specialized whittling knives, with fixed single blades, are preferred for sculpting artistic work. They have thick handles which are easier to grip for long periods, allowing more precise control and pressure.
Occasionally the terms "whittling" and "carving" are used interchangeably, but they are different arts. Carving employs the use of chisels, gouges, and a mallet, while whittling involves only the use of a knife. Carving frequently involves powered equipment such as lathes.
In industrialized areas of the world, whittling is mainly a hobby and not an occupational activity as it was before powered wood working equipment enabled modern production.
"Splash whittling" is a historical, decorative technique in Norway using an ax to create a herringbone pattern.
This page contains text from Wikipedia, the Free Encyclopedia -
https://wn.com/Whittling
This article is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License, which means that you can copy and modify it as long as the entire work (including additions) remains under this license.
This article is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License, which means that you can copy and modify it as long as the entire work (including additions) remains under this license.
The Man
"The Man" is a slang phrase that may refer to the government or to some other authority in a position of power. In addition to this derogatory connotation, it may also serve as a term of respect and praise.
The phrase "the Man is keeping me down" is commonly used to describe oppression. The phrase "stick it to the Man" encourages resistance to authority, and essentially means "fight back" or "resist", either passively, openly or via sabotage.
History
As a phrase meaning "the boss" it dates from at least 1918.
In the Southern U.S. states, the phrase came to be applied to any man or any group in a position of authority, or to authority in the abstract. From about the 1950s the phrase was also an underworld code word for police, the warden of a prison or other law enforcement or penal authorities.
The use of this term was expanded to counterculture groups and their battles against authority, such as the Yippies, which, according to a May 19, 1969 article in U.S. News and World Report, had the "avowed aim ... to destroy 'The Man', their term for the present system of government". The term eventually found its way into humorous usage, such as in a December 1979 motorcycle ad from the magazine Easyriders which featured the tagline, "California residents: Add 6% sales tax for The Man."
This page contains text from Wikipedia, the Free Encyclopedia -
https://wn.com/The_Man
This article is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License, which means that you can copy and modify it as long as the entire work (including additions) remains under this license.
This article is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License, which means that you can copy and modify it as long as the entire work (including additions) remains under this license.
- Loading...
-
3:21Whittling Basics - D-I-Why Not?
Whittling Basics - D-I-Why Not?Whittling Basics - D-I-Why Not?
http://www.korduroy.tv Episode 12 Whittling is pretty much as ancient as humans, and has provided a means for expression both artistic and functional. Whether it is for meditative reasons or that you are just looking kill some time, whittling is one of the cheapest and most accessible hobbies one can find. All you need is wood, a knife, and a little bit of inspiration on what to make. In this episode of D-I-Why Not? presented by Leatherman, our friend James shows us some of the basics in starting your first whittling project. Introduction to Whittling: 1. Acquire your wood - A local woodworker, furniture builder, or cabinetmaker is a great resource for this. They have contacts to solid wood sources, or, if you're lucky, will share some of their scrap pieces. 2. Study the grain of the wood - All wood has grain that runs a certain direction; the grain is the flow of the wood. 3. When you begin to whittle, always cut with the grain or across the grain of the wood. NEVER cut against the grain, or you will risk splintering your wood. 4. Study your piece of wood and try to find your desired shape within that piece. 5. Draw the outline of your design on the wood with a pencil or marker, to give yourself a goal. 6. Before you get started, familiarize yourself with these four basic whittling strokes: - Traditional Push Cut- Lops off large chunks of wood at a time - Stabilizing Thumb Push Cut- Gives you more control and precision for smaller cuts - Channel Cut or 'V' Cut- Stroke on one side and back again, either sloped or sloped straight - Paring Cut-Used for very fine detailing. Somewhat risky. Bloody fingers may ensue. Use extreme caution. 7. You are now ready to get your knife dirty! Rough out your design, by quickly but carefully removing excess chunks of wood. The Traditional Push Cut is best for this step. 8. Find somewhere comfortable (you're gonna be here awhile) and whittle away! Utilize the different strokes when needed in your project. If it feels right, go with it. If it's hard, consider another stroke. 9. Keep working until your design pops out of the wood. 10. Now you're ready to sand. Use four different grits of sandpaper, from 60 on up to 200. Be sure to keep a bandana nearby, to clean shavings off wood between sanding. 11. Coat your finished wood with Mineral Oil to preserve and shine up your project. Make sure the oil is food grade and use a few coats. 12. Enjoy your homemade piece! Bask in the sensation of making your own beautiful wood creations! Tips as You Whittle: 1. Slow is Smooth and Smooth is Fast 2. The Best Second Chance is a Good First Chance 3. Patience Now Saves Headaches Later 4. Give your Project some Space when it Drives You Nuts: Breaks are Necessary 5. Safety First!! Host Idle Theory Bus Camera Rachel Goldfarb Edit James Campbell Music "You Don't Know My Mind" Smokey Hormel ©2013 KorduroyTV -
7:14Whittling The 5 Minute Bear part 1
Whittling The 5 Minute Bear part 1Whittling The 5 Minute Bear part 1
carving -
7:13The Basics of Whittling and Chip Carving
The Basics of Whittling and Chip CarvingThe Basics of Whittling and Chip Carving
eCountryLifestyle introduces you to Berry Williams who is primarily a wood whittler whos been whittling for more years than he cares to count. He claims not to be a wood carver, as being a wood carver requires having talent and expensive tools. Berry likes to whittle primarily using his pocket knife and a type of wood called Bass wood, which is reasonably firm and not very grainy. In this video he shows you how to make a Christmas Star using a more expensive Chip Carving knife, stressing you should always keep your knives super sharp and take your time to avoid accidents. If you like working with your hands and if you like working with wood, Berry recommends giving whittling a try, its a lot of fun! -
14:32Forging 3 Whittling Knives from Drill Bits
Forging 3 Whittling Knives from Drill BitsForging 3 Whittling Knives from Drill Bits
In this tutorial I am going to show you how to forge 3 carving knives from drill bits and files. The forge used here was made from NightHawkInLight's tutorial: https://www.youtube.com/watch?v=jBVa2bw3r_k My drill bit knife tutorial: https://www.youtube.com/watch?v=Rxo0G39ETt8 How I made the forge:https://www.youtube.com/watch?v=bmbZMtk7X80 All music was used with permission from the creator and is royalty free. Intro music by: Lino Rise Title: "Cypress" Source: www.free-intro-music.com Licenced under Creative Commons by Attribution 3.0 outro music: DM Galaxy - Paralyzed (Disfigure Remix) [NCS Release] By Disfigure: https://soundcloud.com/disfigureofficial NCS video: https://www.youtube.com/watch?v=3gM612nH8Yo&list;=UU_aEa8K-EOJ3D6gOs7HcyNg Main music in the video by dano : http://www.danosongs.com/#music Disclaimer: I hold no responsibility for any damage, injury, or death caused if you try to re create or use any of the weapons or projects seen on any of my videos. By attempting to do anything seen on my channel the user is completely responsible for any consequences caused by his/her actions. If you do make these weapons be safe and always wear eye protection when using them – (if necessary) and always use these weapons in a safe and controlled environment where no one is in danger because of your actions! don’t be an idiot! there may be dangers that i am not aware of when making these weapons. I make these weapons because I am interested in the methods and engineering of them but I am NOT at all interested in using them for hunting or hurting people! (but they may be useful in the coming zombie apocalypse!) Any of the weapons or processes on my channel could be dangerous if attempted. Thank you so much to my patrons! They helped make this video possible! Daniel Wiegert kubeek Oliver Lorrance Stephan Burlot Davidstgelais Kieran Harkin Larry Kuszmaul Sam Carter Villads Møller If you want to help support my videos then please visit this link and consider donating! https://www.patreon.com/TheArtOfWeapons -
4:05Whittling a bird out of a creative block
Whittling a bird out of a creative blockWhittling a bird out of a creative block
I've been in a woodworking funk these past few weekends. Unable to really find an inspired project. So I decided to get a small chunk of wood and start whittling...something I haven't done since I was a kid. It's an invigorating exercise! So if you are at a loss for something to do, try whittling! It's asy and requires nothing more than a pocket knife and a block of pine. -
9:15Whittling The Quick Simple Afternoon Project Part 1
Whittling The Quick Simple Afternoon Project Part 1Whittling The Quick Simple Afternoon Project Part 1
carving -
4:09The man who makes his living whittling wooden spoons
The man who makes his living whittling wooden spoonsThe man who makes his living whittling wooden spoons
Barnaby Carder - who calls himself Barn the Spoon - spends his days sitting in a London shopfront, painstakingly whittling wooden spoons. After being apprenticed to a wooden furniture maker, he spent three years travelling around forests - sleeping in the woods and carving spoons from the trees. He ended up saving enough money to open his tiny shop in Hackney last year, from which he creates the spoons using timber harvested from Tower Hamlets Cemetery Park. -
2:40Whittling an Otter
Whittling an OtterWhittling an Otter
Woodcarving (whittling) an otter with a victorinox swiss army knife. (hiker model) Woodcarving by Aaron Pierre Gymnopedie No. 2 Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 License http://creativecommons.org/licenses/b... -
17:54whittling knives
whittling kniveswhittling knives
a short chat about the classic slip joint whittling knives..thanks for all your support..safe journeys -
3:07WOODCARVING POCKET KNIFE WHITTLING
WOODCARVING POCKET KNIFE WHITTLINGWOODCARVING POCKET KNIFE WHITTLING
FACE CARVING,Woodcarving from basswood with my Oar Carver.Also cutting a carving blank on the bandsaw...
-
Whittling Basics - D-I-Why Not?
http://www.korduroy.tv Episode 12 Whittling is pretty much as ancient as humans, and has provided a means for expression both artistic and functional. Whether it is for meditative reasons or that you are just looking kill some time, whittling is one of the cheapest and most accessible hobbies one can find. All you need is wood, a knife, and a little bit of inspiration on what to make. In this episode of D-I-Why Not? presented by Leatherman, our friend James shows us some of the basics in starting your first whittling project. Introduction to Whittling: 1. Acquire your wood - A local woodworker, furniture builder, or cabinetmaker is a great resource for this. They have contacts to solid wood sources, or, if you're lucky, will share some of their scrap pieces. 2. Study the grain of the w...
published: 06 Nov 2013 -
Whittling The 5 Minute Bear part 1
carving
published: 13 Feb 2009 -
The Basics of Whittling and Chip Carving
eCountryLifestyle introduces you to Berry Williams who is primarily a wood whittler whos been whittling for more years than he cares to count. He claims not to be a wood carver, as being a wood carver requires having talent and expensive tools. Berry likes to whittle primarily using his pocket knife and a type of wood called Bass wood, which is reasonably firm and not very grainy. In this video he shows you how to make a Christmas Star using a more expensive Chip Carving knife, stressing you should always keep your knives super sharp and take your time to avoid accidents. If you like working with your hands and if you like working with wood, Berry recommends giving whittling a try, its a lot of fun!
published: 05 Feb 2009 -
Forging 3 Whittling Knives from Drill Bits
In this tutorial I am going to show you how to forge 3 carving knives from drill bits and files. The forge used here was made from NightHawkInLight's tutorial: https://www.youtube.com/watch?v=jBVa2bw3r_k My drill bit knife tutorial: https://www.youtube.com/watch?v=Rxo0G39ETt8 How I made the forge:https://www.youtube.com/watch?v=bmbZMtk7X80 All music was used with permission from the creator and is royalty free. Intro music by: Lino Rise Title: "Cypress" Source: www.free-intro-music.com Licenced under Creative Commons by Attribution 3.0 outro music: DM Galaxy - Paralyzed (Disfigure Remix) [NCS Release] By Disfigure: https://soundcloud.com/disfigureofficial NCS video: https://www.youtube.com/watch?v=3gM612nH8Yo&list;=UU_aEa8K-EOJ3D6gOs7HcyNg Main music in the video by dano : http://www...
published: 16 May 2015 -
Whittling a bird out of a creative block
I've been in a woodworking funk these past few weekends. Unable to really find an inspired project. So I decided to get a small chunk of wood and start whittling...something I haven't done since I was a kid. It's an invigorating exercise! So if you are at a loss for something to do, try whittling! It's asy and requires nothing more than a pocket knife and a block of pine.
published: 07 Mar 2010 -
Whittling The Quick Simple Afternoon Project Part 1
carving
published: 18 Apr 2010 -
The man who makes his living whittling wooden spoons
Barnaby Carder - who calls himself Barn the Spoon - spends his days sitting in a London shopfront, painstakingly whittling wooden spoons. After being apprenticed to a wooden furniture maker, he spent three years travelling around forests - sleeping in the woods and carving spoons from the trees. He ended up saving enough money to open his tiny shop in Hackney last year, from which he creates the spoons using timber harvested from Tower Hamlets Cemetery Park.
published: 10 May 2013 -
Whittling an Otter
Woodcarving (whittling) an otter with a victorinox swiss army knife. (hiker model) Woodcarving by Aaron Pierre Gymnopedie No. 2 Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 License http://creativecommons.org/licenses/b...
published: 10 Mar 2016 -
whittling knives
a short chat about the classic slip joint whittling knives..thanks for all your support..safe journeys
published: 19 Nov 2015 -
WOODCARVING POCKET KNIFE WHITTLING
FACE CARVING,Woodcarving from basswood with my Oar Carver.Also cutting a carving blank on the bandsaw...
published: 27 Feb 2014
Whittling Basics - D-I-Why Not?
- Order: Reorder
- Duration: 3:21
- Updated: 06 Nov 2013
- views: 61620
http://www.korduroy.tv
Episode 12
Whittling is pretty much as ancient as humans, and has provided a means for expression both artistic and functional. Whether ...
http://www.korduroy.tv
Episode 12
Whittling is pretty much as ancient as humans, and has provided a means for expression both artistic and functional. Whether it is for meditative reasons or that you are just looking kill some time, whittling is one of the cheapest and most accessible hobbies one can find. All you need is wood, a knife, and a little bit of inspiration on what to make.
In this episode of D-I-Why Not? presented by Leatherman, our friend James shows us some of the basics in starting your first whittling project.
Introduction to Whittling:
1. Acquire your wood - A local woodworker, furniture builder, or cabinetmaker is a great resource for this. They have contacts to solid wood sources, or, if you're lucky, will share some of their scrap pieces.
2. Study the grain of the wood - All wood has grain that runs a certain direction; the grain is the flow of the wood.
3. When you begin to whittle, always cut with the grain or across the grain of the wood. NEVER cut against the grain, or you will risk splintering your wood.
4. Study your piece of wood and try to find your desired shape within that piece.
5. Draw the outline of your design on the wood with a pencil or marker, to give yourself a goal.
6. Before you get started, familiarize yourself with these four basic whittling strokes:
- Traditional Push Cut- Lops off large chunks of wood at a time
- Stabilizing Thumb Push Cut- Gives you more control and precision for smaller cuts
- Channel Cut or 'V' Cut- Stroke on one side and back again, either sloped or sloped straight
- Paring Cut-Used for very fine detailing. Somewhat risky. Bloody fingers may ensue. Use extreme caution.
7. You are now ready to get your knife dirty! Rough out your design, by quickly but carefully removing excess chunks of wood. The Traditional Push Cut is best for this step.
8. Find somewhere comfortable (you're gonna be here awhile) and whittle away! Utilize the different strokes when needed in your project. If it feels right, go with it. If it's hard, consider another stroke.
9. Keep working until your design pops out of the wood.
10. Now you're ready to sand. Use four different grits of sandpaper, from 60 on up to 200. Be sure to keep a bandana nearby, to clean shavings off wood between sanding.
11. Coat your finished wood with Mineral Oil to preserve and shine up your project. Make sure the oil is food grade and use a few coats.
12. Enjoy your homemade piece! Bask in the sensation of making your own beautiful wood creations!
Tips as You Whittle:
1. Slow is Smooth and Smooth is Fast
2. The Best Second Chance is a Good First Chance
3. Patience Now Saves Headaches Later
4. Give your Project some Space when it Drives You Nuts: Breaks are Necessary
5. Safety First!!
Host
Idle Theory Bus
Camera
Rachel Goldfarb
Edit
James Campbell
Music
"You Don't Know My Mind"
Smokey Hormel
©2013 KorduroyTV
wn.com/Whittling Basics D I Why Not
http://www.korduroy.tv
Episode 12
Whittling is pretty much as ancient as humans, and has provided a means for expression both artistic and functional. Whether it is for meditative reasons or that you are just looking kill some time, whittling is one of the cheapest and most accessible hobbies one can find. All you need is wood, a knife, and a little bit of inspiration on what to make.
In this episode of D-I-Why Not? presented by Leatherman, our friend James shows us some of the basics in starting your first whittling project.
Introduction to Whittling:
1. Acquire your wood - A local woodworker, furniture builder, or cabinetmaker is a great resource for this. They have contacts to solid wood sources, or, if you're lucky, will share some of their scrap pieces.
2. Study the grain of the wood - All wood has grain that runs a certain direction; the grain is the flow of the wood.
3. When you begin to whittle, always cut with the grain or across the grain of the wood. NEVER cut against the grain, or you will risk splintering your wood.
4. Study your piece of wood and try to find your desired shape within that piece.
5. Draw the outline of your design on the wood with a pencil or marker, to give yourself a goal.
6. Before you get started, familiarize yourself with these four basic whittling strokes:
- Traditional Push Cut- Lops off large chunks of wood at a time
- Stabilizing Thumb Push Cut- Gives you more control and precision for smaller cuts
- Channel Cut or 'V' Cut- Stroke on one side and back again, either sloped or sloped straight
- Paring Cut-Used for very fine detailing. Somewhat risky. Bloody fingers may ensue. Use extreme caution.
7. You are now ready to get your knife dirty! Rough out your design, by quickly but carefully removing excess chunks of wood. The Traditional Push Cut is best for this step.
8. Find somewhere comfortable (you're gonna be here awhile) and whittle away! Utilize the different strokes when needed in your project. If it feels right, go with it. If it's hard, consider another stroke.
9. Keep working until your design pops out of the wood.
10. Now you're ready to sand. Use four different grits of sandpaper, from 60 on up to 200. Be sure to keep a bandana nearby, to clean shavings off wood between sanding.
11. Coat your finished wood with Mineral Oil to preserve and shine up your project. Make sure the oil is food grade and use a few coats.
12. Enjoy your homemade piece! Bask in the sensation of making your own beautiful wood creations!
Tips as You Whittle:
1. Slow is Smooth and Smooth is Fast
2. The Best Second Chance is a Good First Chance
3. Patience Now Saves Headaches Later
4. Give your Project some Space when it Drives You Nuts: Breaks are Necessary
5. Safety First!!
Host
Idle Theory Bus
Camera
Rachel Goldfarb
Edit
James Campbell
Music
"You Don't Know My Mind"
Smokey Hormel
©2013 KorduroyTV
- published: 06 Nov 2013
- views: 61620
Whittling The 5 Minute Bear part 1
- Order: Reorder
- Duration: 7:14
- Updated: 13 Feb 2009
- views: 87832
carving
carving
wn.com/Whittling The 5 Minute Bear Part 1
carving
- published: 13 Feb 2009
- views: 87832
The Basics of Whittling and Chip Carving
- Order: Reorder
- Duration: 7:13
- Updated: 05 Feb 2009
- views: 265529
eCountryLifestyle introduces you to Berry Williams who is primarily a wood whittler whos been whittling for more years than he cares to count. He claims not to ...
eCountryLifestyle introduces you to Berry Williams who is primarily a wood whittler whos been whittling for more years than he cares to count. He claims not to be a wood carver, as being a wood carver requires having talent and expensive tools. Berry likes to whittle primarily using his pocket knife and a type of wood called Bass wood, which is reasonably firm and not very grainy. In this video he shows you how to make a Christmas Star using a more expensive Chip Carving knife, stressing you should always keep your knives super sharp and take your time to avoid accidents. If you like working with your hands and if you like working with wood, Berry recommends giving whittling a try, its a lot of fun!
wn.com/The Basics Of Whittling And Chip Carving
eCountryLifestyle introduces you to Berry Williams who is primarily a wood whittler whos been whittling for more years than he cares to count. He claims not to be a wood carver, as being a wood carver requires having talent and expensive tools. Berry likes to whittle primarily using his pocket knife and a type of wood called Bass wood, which is reasonably firm and not very grainy. In this video he shows you how to make a Christmas Star using a more expensive Chip Carving knife, stressing you should always keep your knives super sharp and take your time to avoid accidents. If you like working with your hands and if you like working with wood, Berry recommends giving whittling a try, its a lot of fun!
- published: 05 Feb 2009
- views: 265529
Forging 3 Whittling Knives from Drill Bits
- Order: Reorder
- Duration: 14:32
- Updated: 16 May 2015
- views: 354417
In this tutorial I am going to show you how to forge 3 carving knives from drill bits and files.
The forge used here was made from NightHawkInLight's tutorial:...
In this tutorial I am going to show you how to forge 3 carving knives from drill bits and files.
The forge used here was made from NightHawkInLight's tutorial: https://www.youtube.com/watch?v=jBVa2bw3r_k
My drill bit knife tutorial: https://www.youtube.com/watch?v=Rxo0G39ETt8
How I made the forge:https://www.youtube.com/watch?v=bmbZMtk7X80
All music was used with permission from the creator and is royalty free.
Intro music by: Lino Rise
Title: "Cypress"
Source: www.free-intro-music.com
Licenced under Creative Commons by Attribution 3.0
outro music: DM Galaxy - Paralyzed (Disfigure Remix) [NCS Release]
By Disfigure: https://soundcloud.com/disfigureofficial
NCS video: https://www.youtube.com/watch?v=3gM612nH8Yo&list;=UU_aEa8K-EOJ3D6gOs7HcyNg
Main music in the video by dano : http://www.danosongs.com/#music
Disclaimer:
I hold no responsibility for any damage, injury, or death caused if you try to re create or use any of the weapons or projects seen on any of my videos. By attempting to do anything seen on my channel the user is completely responsible for any consequences caused by his/her actions. If you do make these weapons be safe and always wear eye protection when using them – (if necessary) and always use these weapons in a safe and controlled environment where no one is in danger because of your actions!
don’t be an idiot!
there may be dangers that i am not aware of when making these weapons.
I make these weapons because I am interested in the methods and engineering of them but I am NOT at all interested in using them for hunting or hurting people! (but they may be useful in the coming zombie apocalypse!) Any of the weapons or processes on my channel could be dangerous if attempted.
Thank you so much to my patrons!
They helped make this video possible!
Daniel Wiegert
kubeek
Oliver Lorrance
Stephan Burlot
Davidstgelais
Kieran Harkin
Larry Kuszmaul
Sam Carter
Villads Møller
If you want to help support my videos then please visit this link and consider donating!
https://www.patreon.com/TheArtOfWeapons
wn.com/Forging 3 Whittling Knives From Drill Bits
In this tutorial I am going to show you how to forge 3 carving knives from drill bits and files.
The forge used here was made from NightHawkInLight's tutorial: https://www.youtube.com/watch?v=jBVa2bw3r_k
My drill bit knife tutorial: https://www.youtube.com/watch?v=Rxo0G39ETt8
How I made the forge:https://www.youtube.com/watch?v=bmbZMtk7X80
All music was used with permission from the creator and is royalty free.
Intro music by: Lino Rise
Title: "Cypress"
Source: www.free-intro-music.com
Licenced under Creative Commons by Attribution 3.0
outro music: DM Galaxy - Paralyzed (Disfigure Remix) [NCS Release]
By Disfigure: https://soundcloud.com/disfigureofficial
NCS video: https://www.youtube.com/watch?v=3gM612nH8Yo&list;=UU_aEa8K-EOJ3D6gOs7HcyNg
Main music in the video by dano : http://www.danosongs.com/#music
Disclaimer:
I hold no responsibility for any damage, injury, or death caused if you try to re create or use any of the weapons or projects seen on any of my videos. By attempting to do anything seen on my channel the user is completely responsible for any consequences caused by his/her actions. If you do make these weapons be safe and always wear eye protection when using them – (if necessary) and always use these weapons in a safe and controlled environment where no one is in danger because of your actions!
don’t be an idiot!
there may be dangers that i am not aware of when making these weapons.
I make these weapons because I am interested in the methods and engineering of them but I am NOT at all interested in using them for hunting or hurting people! (but they may be useful in the coming zombie apocalypse!) Any of the weapons or processes on my channel could be dangerous if attempted.
Thank you so much to my patrons!
They helped make this video possible!
Daniel Wiegert
kubeek
Oliver Lorrance
Stephan Burlot
Davidstgelais
Kieran Harkin
Larry Kuszmaul
Sam Carter
Villads Møller
If you want to help support my videos then please visit this link and consider donating!
https://www.patreon.com/TheArtOfWeapons
- published: 16 May 2015
- views: 354417
Whittling a bird out of a creative block
- Order: Reorder
- Duration: 4:05
- Updated: 07 Mar 2010
- views: 69736
I've been in a woodworking funk these past few weekends. Unable to really find an inspired project. So I decided to get a small chunk of wood and start whittlin...
I've been in a woodworking funk these past few weekends. Unable to really find an inspired project. So I decided to get a small chunk of wood and start whittling...something I haven't done since I was a kid. It's an invigorating exercise! So if you are at a loss for something to do, try whittling! It's asy and requires nothing more than a pocket knife and a block of pine.
wn.com/Whittling A Bird Out Of A Creative Block
I've been in a woodworking funk these past few weekends. Unable to really find an inspired project. So I decided to get a small chunk of wood and start whittling...something I haven't done since I was a kid. It's an invigorating exercise! So if you are at a loss for something to do, try whittling! It's asy and requires nothing more than a pocket knife and a block of pine.
- published: 07 Mar 2010
- views: 69736
Whittling The Quick Simple Afternoon Project Part 1
- Order: Reorder
- Duration: 9:15
- Updated: 18 Apr 2010
- views: 75396
carving
carving
wn.com/Whittling The Quick Simple Afternoon Project Part 1
carving
- published: 18 Apr 2010
- views: 75396
The man who makes his living whittling wooden spoons
- Order: Reorder
- Duration: 4:09
- Updated: 10 May 2013
- views: 181297
Barnaby Carder - who calls himself Barn the Spoon - spends his days sitting in a London shopfront, painstakingly whittling wooden spoons.
After being apprentic...
Barnaby Carder - who calls himself Barn the Spoon - spends his days sitting in a London shopfront, painstakingly whittling wooden spoons.
After being apprenticed to a wooden furniture maker, he spent three years travelling around forests - sleeping in the woods and carving spoons from the trees.
He ended up saving enough money to open his tiny shop in Hackney last year, from which he creates the spoons using timber harvested from Tower Hamlets Cemetery Park.
wn.com/The Man Who Makes His Living Whittling Wooden Spoons
Barnaby Carder - who calls himself Barn the Spoon - spends his days sitting in a London shopfront, painstakingly whittling wooden spoons.
After being apprenticed to a wooden furniture maker, he spent three years travelling around forests - sleeping in the woods and carving spoons from the trees.
He ended up saving enough money to open his tiny shop in Hackney last year, from which he creates the spoons using timber harvested from Tower Hamlets Cemetery Park.
- published: 10 May 2013
- views: 181297
Whittling an Otter
- Order: Reorder
- Duration: 2:40
- Updated: 10 Mar 2016
- views: 2668
Woodcarving (whittling) an otter with a victorinox swiss army knife. (hiker model)
Woodcarving by Aaron Pierre
Gymnopedie No. 2 Kevin MacLeod (incompetech.co...
Woodcarving (whittling) an otter with a victorinox swiss army knife. (hiker model)
Woodcarving by Aaron Pierre
Gymnopedie No. 2 Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0 License
http://creativecommons.org/licenses/b...
wn.com/Whittling An Otter
Woodcarving (whittling) an otter with a victorinox swiss army knife. (hiker model)
Woodcarving by Aaron Pierre
Gymnopedie No. 2 Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0 License
http://creativecommons.org/licenses/b...
- published: 10 Mar 2016
- views: 2668
whittling knives
- Order: Reorder
- Duration: 17:54
- Updated: 19 Nov 2015
- views: 5066
a short chat about the classic slip joint whittling knives..thanks for all your support..safe journeys
a short chat about the classic slip joint whittling knives..thanks for all your support..safe journeys
wn.com/Whittling Knives
a short chat about the classic slip joint whittling knives..thanks for all your support..safe journeys
- published: 19 Nov 2015
- views: 5066
WOODCARVING POCKET KNIFE WHITTLING
- Order: Reorder
- Duration: 3:07
- Updated: 27 Feb 2014
- views: 36228
FACE CARVING,Woodcarving from basswood with my Oar Carver.Also cutting a carving blank on the bandsaw...
FACE CARVING,Woodcarving from basswood with my Oar Carver.Also cutting a carving blank on the bandsaw...
wn.com/Woodcarving Pocket Knife Whittling
FACE CARVING,Woodcarving from basswood with my Oar Carver.Also cutting a carving blank on the bandsaw...
- published: 27 Feb 2014
- views: 36228
back
- Playlist
- Chat
back
- Playlist
- Chat
3:21
Whittling Basics - D-I-Why Not?
http://www.korduroy.tv
Episode 12
Whittling is pretty much as ancient as humans, and has ...
published: 06 Nov 2013
Whittling Basics - D-I-Why Not?
Whittling Basics - D-I-Why Not?
- Report rights infringement
- published: 06 Nov 2013
- views: 61620
7:14
Whittling The 5 Minute Bear part 1
carving
published: 13 Feb 2009
Whittling The 5 Minute Bear part 1
Whittling The 5 Minute Bear part 1
- Report rights infringement
- published: 13 Feb 2009
- views: 87832
7:13
The Basics of Whittling and Chip Carving
eCountryLifestyle introduces you to Berry Williams who is primarily a wood whittler whos b...
published: 05 Feb 2009
The Basics of Whittling and Chip Carving
The Basics of Whittling and Chip Carving
- Report rights infringement
- published: 05 Feb 2009
- views: 265529
14:32
Forging 3 Whittling Knives from Drill Bits
In this tutorial I am going to show you how to forge 3 carving knives from drill bits and ...
published: 16 May 2015
Forging 3 Whittling Knives from Drill Bits
Forging 3 Whittling Knives from Drill Bits
- Report rights infringement
- published: 16 May 2015
- views: 354417
4:05
Whittling a bird out of a creative block
I've been in a woodworking funk these past few weekends. Unable to really find an inspired...
published: 07 Mar 2010
Whittling a bird out of a creative block
Whittling a bird out of a creative block
- Report rights infringement
- published: 07 Mar 2010
- views: 69736
9:15
Whittling The Quick Simple Afternoon Project Part 1
carving
published: 18 Apr 2010
Whittling The Quick Simple Afternoon Project Part 1
Whittling The Quick Simple Afternoon Project Part 1
- Report rights infringement
- published: 18 Apr 2010
- views: 75396
4:09
The man who makes his living whittling wooden spoons
Barnaby Carder - who calls himself Barn the Spoon - spends his days sitting in a London sh...
published: 10 May 2013
The man who makes his living whittling wooden spoons
The man who makes his living whittling wooden spoons
- Report rights infringement
- published: 10 May 2013
- views: 181297
2:40
Whittling an Otter
Woodcarving (whittling) an otter with a victorinox swiss army knife. (hiker model)
Woodca...
published: 10 Mar 2016
Whittling an Otter
Whittling an Otter
- Report rights infringement
- published: 10 Mar 2016
- views: 2668
17:54
whittling knives
a short chat about the classic slip joint whittling knives..thanks for all your support..s...
published: 19 Nov 2015
whittling knives
whittling knives
- Report rights infringement
- published: 19 Nov 2015
- views: 5066
3:07
WOODCARVING POCKET KNIFE WHITTLING
FACE CARVING,Woodcarving from basswood with my Oar Carver.Also cutting a carving blank on ...
published: 27 Feb 2014
WOODCARVING POCKET KNIFE WHITTLING
WOODCARVING POCKET KNIFE WHITTLING
- Report rights infringement
- published: 27 Feb 2014
- views: 36228
Whittling Basics - D-I-Why Not?...
Whittling The 5 Minute Bear part 1...
The Basics of Whittling and Chip Carving...
Forging 3 Whittling Knives from Drill Bits...
Whittling a bird out of a creative block...
Whittling The Quick Simple Afternoon Project Par...
The man who makes his living whittling wooden spoo...
Whittling an Otter...
whittling knives...
WOODCARVING POCKET KNIFE WHITTLING...
-
Lyrics list:lyrics
-
Way Too Long
-
Way Too Long
Way Too Long
Nobody's been coming round your way
Have you been hearing what they say?
They were your buddies yesterday
But you took too long to pay
Have you heard the latest news
About the cat that got slapped and bashed and bruised
Yeah, I wouldn't wanna be in his shoes
Now the kid's got fuck all to lose
Broken friendships too hard to mention
[Incomprehensible] only invention
As we step from old to new
Andy knows we always wanted to check the things we do
All the kids who were your mates
You've let them sitting on their hate
When you're asleep or you're awake
You cannot hide from your mistake
Has he checked the fresh tickets?
Get my fuckin' money or you get my fuckin' fist
Personality switchin' twitchin'
Like the girls on the springer show bitchin'
Boy's in major shit now
Hasn't even got a little bit now
'Cause he was out on the town, knockin' drinks down
Spiffin' all his money and throwin' it around
Nobody's been coming round your way
Have you been hearing what they say?
They were your buddies yesterday
But you took way too long to pay
All the kids who were your mates
You've left them sitting on their hate
When you're asleep or you're awake
You cannot hide from your mistake
Have you seen where Stevie's been?
Well, I've seen him by the way
If you know what I mean
Where?
Well, he was at the club last night
Drinkin' with a girl and she looked a bit alright
What the fuck is he doin'?
Spending all my money on a girl, now I'm screwin'
I only ticked him for a favour
And he pays me back with that kinda behaviour?
And that just seems to be the way things go down
Just enjoy it to the point of no return
Let's get paid, let's just get paid
And that just seems to be the way things go down
Just enjoy it to the point of no return
Let's get paid, let's just get paid
And that just seems to be the way things go down
Just enjoy to the point of no return
back
[VIDEO]: Discovery Of Ancient Sea Monster Skeleton Has Paleontologists Excited
Edit WorldNews.com 16 Oct 2016
The skeleton of an ancient sea monster discovered more than 50 years ago in Scotland has paleontologists excited over the quantity of bones found and anxious to learn more about the reptile, VOA reported Sunday. Using modern fossil extraction methods, the bones of the sea monster was able to be removed from hard rock. The previously unknown reptile lived in the oceans during the time of the dinosaurs, the report said ... ....
back
Putin Hopeful Russia-U.S. Ties Can Be Restored After Elections
Edit Bloomberg 16 Oct 2016
Russia hopes its ties with the U.S. can be restored after elections regardless of who wins, according to President Vladimir Putin. While Democrat Hillary Clinton so far is aggressive toward Russia and Republican Donald Trump wants cooperation, the Kremlin is not ruling out the possibility that the candidates’ positions will change when one of them becomes the U.S ... 16. Photographer ... ....
back
Battling horror of ISIS: Iraq's bloody crisis up close
Edit CNN 16 Oct 2016
(CNN)Thousands dead. Millions more driven from their homes. A future far from certain. This is the situation in Iraq today. The deep-rooted sectarian divide that resurfaced amid the chaos of Saddam Hussein's downfall created a security vacuum that ultimately allowed extremist militant groups like ISIS to flourish. READ MORE. High stakes for Iraq's future ... Read More. CNN looks at Iraq's bloody crisis up close.. THE CRISIS IN NUMBERS ... Replay....
back
Moving beyond the solar system to exoplanets
Edit The Hindu 16 Oct 2016
Ever since the first exoplanet (51 Pegasi b) was discovered in 1995 by Michael Mayor and Didier Queloz, there has been renewed activity and interest in this field. The Kepler and K2 missions of NASA have identified thousands of planet candidates. Now there are nearly 5,000 planet candidates, and of these, some 3,397 have been confirmed as planets, according to the NASA exoplanet archive ... This unit began taking data in 2012 ... ....
back
Breaking: Journalist Amy Goodman May Be Charged with 'Participating in a Riot' for Covering North ...
Edit Alternet 16 Oct 2016
Click here for reuse options!. Journalist Amy Goodman was faced with charges of trespassing that have since been dropped. A North Dakota state prosecutor has sought to charge award-winning journalist Amy Goodman with participating in a "riot" for filming an attack on Native American-led anti-pipeline protesters. The new charge comes after the prosecutor dropped criminal trespassing charges ... The charge in State of North Dakota v....
VOTE: Best Liverpool v Manchester United goals
Edit Sky Sports 16 Oct 2016
There have been plenty of cracking goals scored in this fixture throughout the years and we have whittled them down to a shortlist of 10 stunners ahead of ......
Power being restored in Bermuda after hurricane onslaught
Edit Jamaica Observer 16 Oct 2016
... During the passage of the storm, 27,000 customers, suffered outages as the Category three storm ploughed across the 21 square mile British Overseas Territory ... Meanwhile, the Bermuda Telephone Company – the Internet and cable TV providers were also whittling down the number of customers who lost service during the storm....
Think-tank warns of ‘squeezed incomes’ as inflation rises
Edit Scotsman 16 Oct 2016
Britain’s economy is set to enter a prolonged period of weaker growth as rising inflation and a slump in business investment take their toll, an influential think-tank will warn this week ... However, economists will warn that rising inflationary pressures and falling business investment could whittle that growth back to just 0.8 per cent in 2017 ... It is forecasting GDP growth of 1.4 per cent in 2018 ... ....
Asphalt expert Kopecký takes the top position in ŠKODA duel (Skoda Auto as)
Edit Public Technologies 16 Oct 2016
(Source. Skoda Auto as) ... › Works driver Kopecký takes best time in seven of the eight stages on Saturday in the ŠKODA FABIA R5 ... We pushed a bit more on the asphalt and that gave us the top position ... However, this slim cushion had been whittled away after the very first stage of the day and the Czech then took the lead over the course the following stage kilometres on his favourite surface, asphalt, bagging a total of seven best times ... 1....
Rock music fans pioneer route to a cashless future in Japan
Edit Denver Post 16 Oct 2016
By Chris Cooper, Gareth Allan and Kiyotaka Matsuda, Bloomberg News ... On the agenda ... Related Articles ... “Over the past 30 years in Japan, I have seen the incremental whittling away of cash as king as credit cards have gained popularity, and now Suica and other prepaid cards are transforming how consumers settle their bills,” said Jeff Kingston, director of Asian Studies at Temple University in Japan ... That would be ideal.”....
Pitching & droning: Bauer cuts finger, moved to Game 3
Edit MLB 16 Oct 2016
CLEVELAND -- Another day, another rotation issue for the Indians. This time, it was Trevor Bauer's hobby of building drones that has cost Cleveland at a critical time ... As a result, Cleveland has flip-flopped Bauer and Josh Tomlin in the planned rotation against the Blue Jays in the American League Championship Series ... Indians ... Due to the injuries to Salazar and Carrasco, Cleveland's starting staff has been whittled down to three options....
Women's Super League One: Doncaster Rovers Belles 1-2 Notts County Ladies
Edit BBC News 16 Oct 2016
Jess Clarke has scored six goals in 18 games for Notts County in all competitions this season. Doncaster Rovers Belles have been relegated from Women's Super League 1 after being beaten at home by Notts County Ladies. The South Yorkshire side, who have lost all 14 of their games, knew before kick-off that only victory would keep their survival hopes alive ... Doncaster Belles (4-1-2-1-2) ... Hobbs, Newborough, Whittle, Watson ... Cushin. Referee ... ....
Trent Reznor on Donald Trump's political rise: 'It stopped being funny months ago'
Edit NME 15 Oct 2016
Trent Reznor has shared his thoughts on the unlikely political rise of Donald Trump ... "It is surreal," Reznor told The Daily Beast. "I'll admit that I was entertained during the Republican debates and the whole process of whittling them down ... "But it stopped being funny months ago," he continued ... It's absurd that this is even happening." ... ....
Modern tribes: the man-cave dweller
Edit The Guardian 15 Oct 2016
A lot of men don’t even let women in theirs, I see you’re admiring my Farting Allowed sign, oh, the beer can chandelier – thanks, made it myself, took me for ever, and on the right, that’s my collection of rare condoms, that’s why the kids can’t come in here, I whittled the walnut display cabinet, real labour of love, see this one, very ......
Has Christie finally paid off his presidential campaign debt?
Edit NJ dot com 15 Oct 2016
Gov. Chris Christie's presidential campaign committee filed its quarterly report with the Federal Election Commission. WASHINGTON -- Gov ... That's the same amount he owed at the end of June after a May fundraiser hosted by Donald Trump helped whittle it down from $383,518 at the end of April ... Did Trump erase Christie campaign debt?. The campaign reported $30,850 in the bank. At the Lawrenceville event, Trump announced ... ....
Rea faces late hurdle in World title defence
Edit Belfast Telegraph 15 Oct 2016
Reigning World Superbike champion Jonathan Rea will take in the opening race of the penultimate weekend of the 2016 championship today in Spain, with just one thing on his mind - to retain the title for his factory Kawasaki Racing Team ... Share Go To. Speaking of his opening sessions, Rea said ... Whittled down from thousands of applicants, the 116 riders selected to test will be on track at Guadix in Spain on October 18, 19 and 20....
Q&A;: Lachemann delves into playoff 'pen usage (MLB - Major League Baseball)
Edit Public Technologies 15 Oct 2016
(Source. MLB - Major League Baseball). He has seen a complete overhaul of the usage of pitchers, including in this year's postseason, which he discusses in this week's Q&A;.. MLB.com. Surprised at all by Dodgers manager Dave Roberts' use of the bullpen in the late innings on Thursday?. Lachemann ... It's not like he was getting his brains beat out ... MLB.com ... Lachemann ... MLB.com ... That started whittling away from when a guy would pitch three innings....
Q&A;: Lachemann delves into playoff 'pen usage
Edit MLB 15 Oct 2016
Marcel Lachemann is a pitching guru. A product of Rod Dedeaux and the University of Southern California baseball program, the 75-year-old Lachemann has worked at every level in the game. Originally signed by the Kansas City A's, he pitched in the big leagues with the franchise after it moved to Oakland ... MLB.com ... Lachemann ... MLB.com ... Lachemann ... And he showed that ... MLB.com ... That started whittling away from when a guy would pitch three innings ... ....
- 1
- 2
- 3
- 4
- 5
- Next page »
