2:23
Homemade Liquid Nitrogen Generator using Regenerative Cooling
This is my first successful collection of liquified air using a homemade liquid nitrogen g...
published: 23 Apr 2013
author: imsmoother
Homemade Liquid Nitrogen Generator using Regenerative Cooling
Homemade Liquid Nitrogen Generator using Regenerative Cooling
This is my first successful collection of liquified air using a homemade liquid nitrogen generator. I built the whole thing, not using a preexisting refriger...- published: 23 Apr 2013
- views: 2035
- author: imsmoother
0:56
3D Printed Rocket Engine - Test #25
This is another long duration test demonstrating the durability of the DMLS chamber. The p...
published: 13 Mar 2012
author: RocketMooonlighter
3D Printed Rocket Engine - Test #25
3D Printed Rocket Engine - Test #25
This is another long duration test demonstrating the durability of the DMLS chamber. The pattern on the glowing walls highlights the lands and channels of th...- published: 13 Mar 2012
- views: 35257
- author: RocketMooonlighter
2:55
FSE301 Fall 2012 Group 2 Video #1
Regenerative Cooling Experimental's Video #1 for ASU's FSE 301 Fall 2012 semester....
published: 07 Dec 2012
author: Linda Taylor
FSE301 Fall 2012 Group 2 Video #1
FSE301 Fall 2012 Group 2 Video #1
Regenerative Cooling Experimental's Video #1 for ASU's FSE 301 Fall 2012 semester.- published: 07 Dec 2012
- views: 71
- author: Linda Taylor
0:38
18th Test of DMLS Rocket
This is a 30 second duration test, reaching steady state on the regenerative cooling jacke...
published: 12 Aug 2011
author: RocketMooonlighter
18th Test of DMLS Rocket
18th Test of DMLS Rocket
This is a 30 second duration test, reaching steady state on the regenerative cooling jacket temperature. The chamber now has 18 starts and over 130 seconds o...- published: 12 Aug 2011
- views: 1917
- author: RocketMooonlighter
0:38
Canvas Regenerative Carbon Adsorber Data Sheet Mobile App
Use this mobile app as a data sheet for collecting measurements for regenerative carbon ad...
published: 24 Apr 2013
author: GoCanvas
Canvas Regenerative Carbon Adsorber Data Sheet Mobile App
Canvas Regenerative Carbon Adsorber Data Sheet Mobile App
Use this mobile app as a data sheet for collecting measurements for regenerative carbon adsorber systems. The associated data includes regeneration frequency...- published: 24 Apr 2013
- views: 2
- author: GoCanvas
1:30
Gas Turbine Recuperator Heat Exchanger (Regenerative Cycle)
Regenerative Cycle www.palconltd.com A Recuperator Heat Exchanger on a Gas Turbine....
published: 04 Nov 2011
author: MrJerodMnd
Gas Turbine Recuperator Heat Exchanger (Regenerative Cycle)
Gas Turbine Recuperator Heat Exchanger (Regenerative Cycle)
Regenerative Cycle www.palconltd.com A Recuperator Heat Exchanger on a Gas Turbine.- published: 04 Nov 2011
- views: 1084
- author: MrJerodMnd
1:06
Regenerative DC Braking 0-3000 RPM - .5 second start and .75 second stop
Regenerative DC Braking on a 2.2kw 3hp Hitachi WJ200 VFD with a 35ohm 400watt wire wound r...
published: 04 Apr 2014
Regenerative DC Braking 0-3000 RPM - .5 second start and .75 second stop
Regenerative DC Braking 0-3000 RPM - .5 second start and .75 second stop
Regenerative DC Braking on a 2.2kw 3hp Hitachi WJ200 VFD with a 35ohm 400watt wire wound resistor. .5 second starts and .75 second stops on a 3" Facemill and nmtb30 shellmill holder. Mill is a 3hp Millport CNC knee mill.- published: 04 Apr 2014
- views: 203
1:24
Natural gas or furnace oil regenerative burners and combustion system (30-40% energy-saving)
Natural gas or furnace oil regenerative burners and combustion system
Aluminum melting fu...
published: 27 Dec 2013
Natural gas or furnace oil regenerative burners and combustion system (30-40% energy-saving)
Natural gas or furnace oil regenerative burners and combustion system (30-40% energy-saving)
Natural gas or furnace oil regenerative burners and combustion system Aluminum melting furnace regenerative combustion system consists of regenerative burner (including regenerative burner, fuel burner, regenerator ), air change valve, fuel change valve, gas supply pipeline, pressure maintaining valve, combust-supporting air duct and blower, fume ductwork and induced fan, air compressed pipe, air compressor, regenerative combustion automatic control system and other equipments. FOSHAN METECH ALUMINUM TECHNOLOGY CO.,LTD ( http://www.cnmetech.com) can design and make the regenerative burners or combustion system according to your requirement. (150*10^4Kcal/hour---500*10^4Kcal/hour). The fuel of the regenerative burner can be natural gas, furnace oil/heavy oil, coal gas etc. It can be 30-40% energy-saving, the fuel consumption is about 55-65m³Nm³/ T aluminum. Welcome to email michael@cnmetech.com or SKYPE metech-michael for all details of the regenerative burners or combustion system- published: 27 Dec 2013
- views: 16
8:53
Modernized Experimental 3-TUBE Regenerative Radio
What is Modernized Experimental Radio..? Yeah, it's the radio to enjoy, learn, understand ...
published: 30 May 2013
author: SystemYNT
Modernized Experimental 3-TUBE Regenerative Radio
Modernized Experimental 3-TUBE Regenerative Radio
What is Modernized Experimental Radio..? Yeah, it's the radio to enjoy, learn, understand and play with a radio circuit, which I designed. The purpose is let...- published: 30 May 2013
- views: 78
- author: SystemYNT
2:21
High efficiency regenerative combustion system or regenerative burners
High efficiency regenerative combustion system or regenerative burners
Application of the...
published: 27 Dec 2013
High efficiency regenerative combustion system or regenerative burners
High efficiency regenerative combustion system or regenerative burners
High efficiency regenerative combustion system or regenerative burners Application of the regenerative burners/combustion system: All melting industry that need to recycle the gas additional heat; can save 30-40% energy compare to the normal burners 二、产品特点: 1、一对烧嘴周期性交替地燃烧,从而用烟气加热空气,获得高温助燃空气。当一个烧嘴燃烧时,烟气通过另一个烧嘴,加热其中的蓄热介质(氧化铝球)。当这种蓄热介质被加热后此烧嘴开始燃烧,原来燃烧的烧嘴开始抽吸并排放烟气。助燃空气流经高温的蓄热介质时被加热。空气预热温度最高可达800℃以上,从此获得极高的加热效率。 2、排烟温度低于250℃,有效降低烟气的排放; 3、实现了燃烧、炉温、铝液温度、炉压的全自动控制; Product Features of the regenerative combustion system or burners: 1.One pair of burners combust in turn periodically . Using the flue heat the air to get the high temperature combustion supporting air. When one burner is in combustion, the flue would heat the regenerative medium (Oxidation aluminum ball) via another burner. When the regenerative medium is heated, then the burner of it start to burn, the former combustion burner would start to suck and exhaust the flue. The combustion supporting air would be heated when it pass through the regenerative medium. The air can be pre-heated to above 800℃, to attain the higher heating efficiency. 2. Exhausting temperature below 250℃,can effectively down the discharge of the exhaust gas 3. Fully automatic control of the temperature of the combustion, furnace and molten aluminum, and furnace pressure. 三、燃料: 天燃气、冷煤气、重油、柴油; Fuels for the regenerative burners: Natural gas, cold coal gas, heavy oil, diesel FOSHAN METECH ALUMINUM TECHNOLOGY CO.,LTD (http://www.cnmetech.com) can design all different capacities regenerative burners according to your requirement. Welcome to email Michael@cnmetech.com or SKYPE: metech-michael for all the details of the regenerative burners- published: 27 Dec 2013
- views: 13
3:09
How an Epcon RTO Works
Operation of an Epcon 3-canister Regenerative Thermal Oxidizer (RTO)...
published: 07 Oct 2009
author: EpconLP
How an Epcon RTO Works
How an Epcon RTO Works
Operation of an Epcon 3-canister Regenerative Thermal Oxidizer (RTO)- published: 07 Oct 2009
- views: 2695
- author: EpconLP
4:30
energy saving regenerative burners for aluminum melting or holding furnaces
Regenerative burners/Regenerative combustion system
high efficiency combustion system/ hig...
published: 27 Dec 2013
energy saving regenerative burners for aluminum melting or holding furnaces
energy saving regenerative burners for aluminum melting or holding furnaces
Regenerative burners/Regenerative combustion system high efficiency combustion system/ high efficiency burners energy saving regenerative burners/energy saving regenerative combustion system FOSHAN METECH ALUMINUM TECHNOLOGY CO.,LTD (http://www.cnmetech.com) can design and make different capacities of regenerative burners for you according to your requirement.(300*10^4 Kcal/hour,350*10^4Kcal/hour,400*10^4Kcal/hour etc). This regenerative burners/ combustion system suitable for different kinds of melting furnaces and holding furnaces. The fuels of this regenerative burners can be natural gas, coal gas, heavy oil, diesel. Comparing to the normal burners for the furnace, this regenerative burners/combustion system can be much more energy saving and high efficiency. Generally, the energy consumption of it can be 55-65m³ Nm³/ T aluminum. It can be 30-40% energy-saving. Please email to michael@cnmetech.com for much more detail. Or please add the Skype:metech-michael- published: 27 Dec 2013
- views: 4
1:01
Regenerative Blower Companies
A quick introduction to the industry leaders in regenerative blower manufacturing, includi...
published: 31 Jan 2012
Regenerative Blower Companies
Regenerative Blower Companies
A quick introduction to the industry leaders in regenerative blower manufacturing, including how they can be used in various industries. Discover more at http://www.iqsdirectory.com/blowers/regenerative-blowers/- published: 31 Jan 2012
- views: 173
Youtube results:
2:41
Regenerative solar AC rechargeable usb power pack lighting pt 3
I'm waiting for the 6 volt solar panel and voltage boosting usb board to come. In the mean...
published: 19 Mar 2013
author: wtam69
Regenerative solar AC rechargeable usb power pack lighting pt 3
Regenerative solar AC rechargeable usb power pack lighting pt 3
I'm waiting for the 6 volt solar panel and voltage boosting usb board to come. In the meantime, I've been thinking of ways to make this a more interesting pr...- published: 19 Mar 2013
- views: 68
- author: wtam69
0:20
Regenerative Thermal Oxidizer Operation
This animation demonstrates how air flows and heat is transfered in a two chamber Regenera...
published: 29 Jun 2009
Regenerative Thermal Oxidizer Operation
Regenerative Thermal Oxidizer Operation
This animation demonstrates how air flows and heat is transfered in a two chamber Regenerative Thermal Oxidizer (RTO) to achieve industrial air pollution des...- published: 29 Jun 2009
- views: 8766
- author: Anguil Environmental Systems, Inc.
0:11
Regenerative Thermal Oxidizer (RTO), 190,000 SCFM (300,000 NCMH), with Scrubbers
Regenerative Thermal Oxidizers from The CMM Group are designed to destroy air pollutants e...
published: 09 Mar 2012
author: TheCMMGroupLLC
Regenerative Thermal Oxidizer (RTO), 190,000 SCFM (300,000 NCMH), with Scrubbers
Regenerative Thermal Oxidizer (RTO), 190,000 SCFM (300,000 NCMH), with Scrubbers
Regenerative Thermal Oxidizers from The CMM Group are designed to destroy air pollutants emitted from process exhaust streams at temperatures ranging from 81...- published: 09 Mar 2012
- views: 167
- author: TheCMMGroupLLC
0:59
Acupoint Regenerative Simulation
Water element is associated with the settling and cooling capacity of this finishing form....
published: 18 Apr 2009
Acupoint Regenerative Simulation
Acupoint Regenerative Simulation
Water element is associated with the settling and cooling capacity of this finishing form. Generally done at the end of the IQG series, helps to balance and build foundational (kidney Qi) energy. http://www.integratedqigong.com- published: 18 Apr 2009
- views: 702