Disk sector

In computer disk storage, a sector is a subdivision of a track on a magnetic disk or optical disc. Each sector stores a fixed amount of user data. Traditional formatting of these storage media provides space for 512 bytes (for magnetic disks) or 2048 bytes (for optical discs) of user-accessible data per sector. Newer hard drives use 4096 byte (4 KB or 4K) Advanced Format sectors.

Mathematically, the word sector means a portion of a disk between a center, two radii and a corresponding arc (see Figure 1, item B), which is shaped like a slice of a pie. Thus, the disk sector (Figure 1, item C) refers to the intersection of a track and mathematical sector.

In hard disk drives, each physical sector is made up of three basic areas, the sector header, the data field and the error-correcting code (ECC). The sector header contains information used by the drive for internal synchronization as well as data identification purposes. This information includes the gap, synch byte and address mark. The data field contains the recorded user data. The ECC field contains codes based on the data field, which are used to check and possibly correct any potential errors that may have been introduced into the data.

History

The standard sector size of 512 bytes for magnetic disks was established with the inception of the hard disk drive in 1956. Through a coordinated effort organized by the industry trade organization, International Disk Drive Equipment and Materials Association (IDEMA), leading hardware and software companies started work to define the implementation and standards that would govern sector size formats exceeding 512 bytes to accommodate future increases in data storage capacities.

Seven years later, hard disk drives supporting 1,024-byte sectors began to be integrated into consumer electronics devices. Portable media players and digital video cameras were the first products to utilize the larger sector format. By the end of 2007, Samsung and Toshiba began shipments of 1.8-inch hard disk drives with 4096-byte sectors, the sector size designated as the next standard format for all hard drives.

Usage of 4096-byte sectors in the computing segment started in 2008 with hard drives primarily intended for integration into external add-on storage devices. The movement accelerated in 2010, when three of the five hard disk drive manufacturers, Seagate, Toshiba and Western Digital, began producing hard drives using the 4096, or 4K, sector format. After having successfully defined the standard architecture for the technology, IDEMA further united the hard drive industry to orchestrate an industry-wide transition to 4K as the new standard sector size for all applications using hard disk drives. Under the auspices of IDEMA, the date for the transition from 512 to 4096 byte sectors was designated as January 2011, and Advanced Format was coined as the industry term for all future sector formats extending beyond 512 bytes.

Because of the concentric circle arrangement of tracks, defining a sector as the intersection between a radius and a track creates larger sectors towards the outside of the disk. However, each sector still contained the same number of bytes. This was accomplished by reducing the bit density of the outer sectors relative to the inner ones. Modern hard disks use zoned bit recording, where the disk is divided into zones encompassing a small number contiguous tracks. Each zone is then divided into sectors such that each sector had a similar physical size. Because outer zones have a greater circumference than inner zones, they have more sectors per zone. This is known as zoned bit rate.data is stored on the surface of the platter in tracks and sectors tracks are concentric circles

Advanced Format

See also

References

Category:Computer file systems