This article includes a list of references, but its sources remain unclear because it has insufficient inline citations. Please help to improve this article by introducing more precise citations. (September 2011)

Swiss flat wick kerosene lamp. The knob protruding to the right adjusts the wick, and hence the flame size.

The kerosene lamp (widely known in Britain as a paraffin lamp) is a type of lighting device that uses kerosene (British "paraffin", as distinct from paraffin wax) as a fuel. Kerosene lamps have a wick and a glass chimney or globe; lamps may be used on a table, or hand-held lanterns may used for portable lighting. There are three types of kerosene lamp: traditional flat wick, central draught (tubular round wick), and mantle lamp. There are three types of kerosene lantern: Dead flame, hot blast, and cold blast.

Pressurized kerosene lamps have a gas generator and gas mantle; these are known as Petromax, Tilley lamps, or Coleman lamps, among other manufacturers. They produce more light per unit of fuel than wick-type lamps, but are more complex and expensive in construction, and more complex to operate. A hand-pump pressurizes air, which forces liquid fuel from a reservoir into a gas generator. Vapor from the gas generator burns, heating a mantle to incandescence and also providing heat to the gas generator.

The first description of a simple lamp using crude mineral oil was provided by al-Razi (Rhazes) in 9th century Baghdad, who referred to it as the "naffatah" in his Kitab al-Asrar (Book of Secrets).^[1] In 1846 Abraham Pineo Gesner invented a substitute for whale oil for lighting, distilled from coal. Later made from petroleum, kerosene became a popular lighting fuel. Modern versions of the kerosene lamp were later constructed by the Polish inventor Ignacy Łukasiewicz in 1853 Lviv, and by Robert Edwin Dietz of the United States at about the same time.^[2] The question regarding the primacy of these two inventors' versions of the lamp remains unresolved.^[3]

Kerosene lamps are widely used for lighting in rural areas of Asia and Africa where electrical distribution is not available or too costly for widespread use. Kerosene lamps consume an estimated 77 billion litres per year, equivalent to 1.3 million barrels of oil per day.^[4]

Flat wick lamp[link]

A flat-wick lamp is a simple type of kerosene lamp, which works in a similar way to a candle. This lamp is also very dangerous because if it is broken it can easily start a fire. This type of lamp is also known as a "paraffin lamp" in the United kingdom. A flat-wick lamp has a fuel tank (fount), with the lamp burner attached. Attached to the fuel tank, 4 prongs hold the glass chimney, which acts to prevent the flame from being blown out and enhances a thermally induced draft. The glass chimney needs a "throat," or slight constriction, to create the proper draft for complete combustion of the fuel; the draft carries more air (oxygen) past the flame, helping to produce a brighter, smokeless light than an open flame would produce.

The lamp burner has a flat wick, usually made of cotton. The lower part of the wick dips into the fount and absorbs the kerosene; the top part of the wick extends out of the wick tube of the lamp burner, which includes a wick-adjustment mechanism. Adjusting how much of the wick extends above the wick tube controls the flame. The wick tube surrounds the wick, and ensures that the correct amount of air reaches the lamp burner. Adjustment is usually done by means of a small knob operating a cric, which is a toothed, metal sprocket bearing against the wick. If the wick is too high, and extends beyond the burner cone at the top of the wick tube, the lamp will produce smoke and soot (unburned carbon). When the lamp is lit, the kerosene that the wick has absorbed burns and produces a clear, bright, yellow flame. As the kerosene burns, capillary action in the wick draws more kerosene up from the fuel tank. All kerosene flat wick lamps use the dead flame burner design, where the flame is fed cold air from below and hot air exits above.

Central draught (tubular round wick) lamp[link]

A central draught lamp, or Argand lamp, works in the same manner as the flat wick lamp. The burner is equipped with a tall glass chimney, of around 12 inches tall or taller, to provide the powerful draft this lamp requires to burn properly. The burner uses a wick, usually made of cotton, that is made of a wide, flat wick rolled into a tube, the seam of which is then stitched together to form the complete wick. The tubular wick is then mounted into a "carrier," which is some form of a toothed rack that engages into the gears of the wick-raising machanism of the burner and allows the wick to be raised and lowered. The wick rides in between the inner and outer wick tubes; the inner wick tube (central draft tube) provides the "central draught" or draft that supplies air to the flame spreader. When the lamp is lit, the central draft tube supplies air to the flame spreader that spreads out the flame into a ring of fire and allows the lamp to burn cleanly.

Mantle lamp[link]

A variation on the "central draught" lamp is the mantle lamp. The mantle is a roughly pear-shaped silk-fabric net that contains thorium or other rare-earth salts that will be converted to oxides, which incandescence (glow brightly) upon combustion of fuel. As mantle lamps are considerably brighter than flat- or round-wick lamps, and produce a whiter light, a lamp shade is often desirable. They also consume fuel at a greater rate than simple wick lamps, and produce large amounts of heat. A few operating mantle lamps can serve to heat a small building in cold weather. Mantle lamps, because of the higher temperature at which they operate, do not produce much of an odor, except when they are first ignited or extinguished. Like flat- and round-wick lamps, they can be adjusted for brightness, and can also be adjusted too high, which will cause the lamp chimney and the mantle to soot up. If a too high adjusted lamp is caught promptly, it can simply be adjusted down, and the small amount of soot on the mantle will soon be burned off. If it is not caught soon enough, a "runaway lamp" condition can result.

Most mantle lamps contain a gas generator and require preheating the generator before lighting. An air pump is used to deliver fuel under pressure to the gas generator. One model of mantle lamp uses only a wick. Large fixed pressurized kerosene mantle lamps were used in lighthouse beacons for navigation of ships, with improved intensity and lower fuel consumption than previous oil lamps.^[5]

Kerosene lantern[link]

A kerosene lantern, also known as a "barn lantern" or "hurricane lantern," is a flat-wick lamp made portable and for outdoor use. They are made of soldered or crimped-together sheet metal stampings, with tin-plated sheet steel being the most common material, followed by brass and copper. There are three types: Dead flame, hot blast, and cold blast.

Dead flame[link]

The earliest portable kerosene "glass globe" lanterns, of the 1850s and 60s, were of the dead-flame type. Another early kerosene lantern was a flat-wick lamp installed in a metal box, with glass panes. It was made to be a stationary outdoor lamp, and was not intended to be portable. A dead-flame lantern works by drawing in fresh air directly below the burner, while the hot exhaust air is exhausted out of the top of the lantern.

Hot blast[link]

The hot-blast design, also known as a "tubular lantern" due to the round metal tubes used in its construction, was invented by John Irwin and patented on January 12, 1868. The hot-blast design collected hot (exhaust) air from above the globe and fed it through metal side tubes to the burner, to make the flame burn brighter.

Hot-blast kerosene lantern

Cold blast[link]

The cold-blast design is similar to the hot-blast, except that cold fresh air is drawn in from around the top of the globe and is then fed though the metal side tubes to the flame, making it burn brighter. This design produces a brighter light than the hot blast design, because the fresh air that is fed to the flame has plenty of oxygen to support the combustion process.

Cold-blast kerosene lantern

Operation and maintenance[link]

Lighting a flat-wick lamp requires filling the fuel tank (fount) with fuel and allowing time for the wick to absorb the fuel. The wick is trimmed straight across with a pair of sharp scissors before lighting. With the glass chimney lifted off the lamp, the wick is tuned up and lighted with a match or other lighter. The wick is turned down if smoke develops, and the lamp chimney lowered. After a few minutes warm-up the lamp can be turned to full brightness. Extinguishing the lamp is done by turning down the wick and blowing out the flame, or by turning the wick down below the top of the wick tube.

Mantle lamps, and other lamps that use the "central-draught" tubular wick burner are lit in a similar fashion. The wick on a mantle lamp or "central-draught" tubular wick lamp is trimmed only with a special wick cleaner to remove the carbon off the top of the wick and to leave a smooth surface on the top of it.

Fuels[link]

Generic lamp oil is available clear or in a choice of several colors and in scented and unscented forms. Lamp oil burns cleaner and with less odor than kerosene. K-1 kerosene is the preferred fuel for kerosene wick lamps. Red kerosene is dyed red and is slightly less expensive than K-1 kerosene, as no motor-fuel taxes are collected on it. "Klean-Heat" is a cleaner-burning, nicer-smelling^{[citation needed]} kerosene substitute, sold at many hardware stores during winter. Citronella oil is a citronella-scented lamp oil; some brands also have lemongrass oil in them and they are used for their insect repellent properties and should only be used outdoors.

Kerosene wick lamps should only be operated with kerosene or lamp oil, but alternative fuels are used in an emergency. Such fuels may produce additional smoke and odor and may not be usable indoors. Tractor vaporizing oil is made from kerosene with some additive to make a motor fuel for tractors. No. 1 diesel fuel is about the same as kerosene but with the additives to make it a motor fuel. Jet A jet-engine fuel is essentially kerosene with a few additives.

Any liquid with a low flash point presents a risk of fire or explosion with a kerosene wick lamp. Such liquids include:

• Charcoal lighter fluid
• Gasoline (petrol)
• Naphtha, white gas or coleman fuel
• mineral spirits, paint thinner, white spirit or stoddard solvent
• other hydrocarbon solvents such as turpentine, benzene, zylene, toluene, acetone, lacquer thinner
• denatured alcohol.

Contamination of lamp fuel with even a small amount of gasoline results in a lower flash point and higher vapor pressure for the fuel, with potentially dangerous consequences. Vapors from spilled fuel may ignite; vapor trapped above liquid fuel may lead to excess pressure and fires. Kerosene lamps are still extensively used in areas without electrical lighting and the cost and dangers of combustion lighting are a continuing concern in many countries.^[6]

Performance[link]

The light output of a kerosene lamp varies dependiing on the type. Wick-type lamps have the lowest output and pressurized lamps have higher output; the range is between 20 and 100 lumens per lamp. A kerosene lamp producing 37 lumens and burned 4 hours per day will consume about 3 litres of kerosene every month.^[7]

See also[link]

• Robert Edwin Newbery
• List of light sources
• Gas mantle
• Citronella
• Candles
• Oil lamp
• Safe bottle lamp

References[link]

External links[link]

Wikimedia Commons has media related to: Kerosene lamps

• International Guild of Lamp Researchers
• Making and Repairing Kerosene Lamps
• Historic Lamp forum
• Information concerning kerosene burners (German) by Gerhard Bruder
• Oil Lamp Basics for Survivalists
• Information on Dietz Kerosene Lamps and Lanterns
• The kerosene lamp BAT № 158