http://www.RCSparks.com - Working the Holiday SUCKS - but, when you're the only crew in the Yard - it's not so bad. The Yard Man was bustin' our nuts all day - but we followed the rules, and kept the rigs moving. Amazing what you can accomplish with a few hours of dedication. I had a blown out tire on the Dump truck mid-way, but was able to fix it off camera. Good thing to, because we had to get those stones moved before the Boss got back. I'm getting much better with the excavator now - glad to see the progression is coming along nicely. For those inquiring minds - Yes, I drove both rigs - and filmed todays Adventure! I know lots of folks ask me questions about these rigs - and where I get them - so please see the info below for all of your questions Answers! For now, I have to get outside for more diggin'! Heads UP: Decals seen in video are NOT iNCLUDED with the RC's.. they are mine.. These Rigs are powered by GENSACE Lipo Batteries - http://www.Hobbypartz.com From the RC4WD Website: http://store.rc4wd.com/ Important Note: This product is for experienced R/C users. Not recommended if you just started with R/C. TRUCK: 1/14 8x8 Armageddon Hydraulic Dump Truck: http://goo.gl/lUnsQa The Armageddon is one of the most powerful R/C hydraulic dump truck available today. Highly detailed base on European style dump truck. Engineered specifically for the tough demands of transporting gravel, sand, asphalt, snow, wood chips or rocks. Created for the customer who requires reliability and high production in bulk earth moving or construction projects. CNC machined metal parts, fully assembled, ready to work! Massive power through 1000kV high speed brushless system. Specification: Hard plastic European style front Cab Full metal 2 speed transmission (Planetary gears) European style V shape dumper Full electronic sound system (engine start, idle and more) Transfer case (billet alum) Scale fuel tank (billet alum) Super scaled leaf spring suspension setup Scale rims (billet alum) Remote lockable rear axle (locking differential) Full metal front and rear axle housing Steel scale drive shaft Realism front cab latch Retractable steel ladder Molded functional fuel tank (filled with hydraulic oil) Automatic trailer gate (do not attempt to open it by hand) Retractable steel ladder Rear light guard (protect against rock) Scale light bucket (fit 3-5mm LED) Recommended payload: 16kg/35lbs Maximum lift power: 42kg/92lbs Fully painted Scale fire extinguishers and spare wheel/tire Cylinder maximum thrust: 109kg/231 lbs Brushed driven motor 1000kV Brushless motor-driven micro hydraulic pump Length: 687mm/27inch Width: 186mm/7.3inch Height: 262mm/10.3inch Weight: 8kg/17lbs Axle gear ratio: 2.6:1 Transfer case gear ratio: 1:1 Theoretical load: 15kg/33lbs Load total mass: 23kg/50lbs First gear 1:16, second gear 1:4 (Transmission) Basic 6 channel 2.4Ghz radio Basic 60T 540 motor 30 days limited warranty This product is professionally pre-assembled 1/12 Scale Earth Digger 4200XL Hydraulic Excavator: http://goo.gl/aH2Akw Earth Digger 4200 hydraulic excavator is the most power excavator available today, created for the customer who requires reliability and high production in bulk earth moving or construction projects. CNC machined metal parts, fully assembled, ready to dig! Massive power through 350kV brushless system. 100% CNC machined aluminum (except track and hydraulic pump) Custom 8 channel 2.4Ghz radio High Intensity Light (Super bright) (3 Watt) Optimized steel hydraulic system Scale operator station (can fit a driving figure and seat) Steel molded tracks (50mm width, 45 grade carbon steel) Efficient under carriage with tracks Reliable hydraulic valve and adjustable pump Heavy duty hoses (OD 4.5mm Nylon, ID 2.5mm) Bearing based undercarriage design Undercarriage rotate 360 degrees (endless) Powder coated in yellow Massive brushless system (hydraulic) 125A brushless ESC with BEC 350Kv brushless monster torque motor (4130 OutRunner, 6mm shaft) Neodymium magnets Belt/track is track is controlled individually Run time is: 40-50 minutes (6500mAh battery) Steel machined oil pump (45mm X 30mm X 15.5mm) Digging force: 15kg/33pounds Driving speed: 310 meter per hour Scale: 1:12 Dig depth: 495mm/19.4inch Height of cabin: 155mm/6.1inch Length: 1.15meter/45inch Width: 250mm/9.8inch Height: 840mm/33inch Deadweight: 20kg/44lbs Operating oil pressure: 20Bar, 290psi Manufactured by JDCustoms Where I get my RC's: http://www.PMHobbycraft.ca T-SHIRTS & Hoodies! http://rcsparks.spreadshirt.com/ FACEBOOK: https://www.facebook.com/RCSparks.Studio RC FORUMS: http://www.rcsparks.com/forum CREATED BY: djmedic2008 Subscribe, it's Free! Viewer Mail: RCSparks Studio P.O. Box # 89133 70 High Street Calgary Alberta Canada T2Z 3W3 Please Note: I do NOT Sell RC's

• published: 02 Sep 2013
• views: 11542