This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. (June 2008)

Early Jack Chrisman funny car from 1965

1971 Mickey Thompson-owned funny car

1975 Gene Snow funny car

Funny Car is a drag racing car class. In the United States, other "professional" classes are Top Fuel, Pro Stock, and Pro Stock Motorcycle. Funny cars have forward-mounted engines and carbon fiber automotive bodies over the chassis, giving them an appearance vaguely approximating manufacturers' showroom models. The Dodge Charger and Chevrolet Impala sedans, along with the Ford Mustang and Toyota Solara coupe, are now commonly used in the National Hot Rod Association (NHRA). Worldwide, however, many different body styles are used. These "fake" body shells are not just cosmetic: they serve an important aerodynamic purpose.^[1]

Guidelines[link]

The NHRA has strict guidelines for funny cars. Most of the rules relate to the engine. In short, the engines can only be V-8s displacing no more than 500 cubic inches (8.19 L). (The most popular design is loosely based on the Chrysler 426 Hemi.) There can only be two valves per cylinder. The heads are machined from a solid block of billet aluminum and have no water jackets, as the high latent heat of the methanol in the fuel coupled with the brevity of the run precludes the need for water cooling of the cylinder heads. Superchargers are restricted to a basic Roots type—19-inch (480 mm) rotor case width with a breadth of 11.25 inches (286 mm). The rotors are not allowed to have more than a certain amount of helical twist in them so the blower does not become a screw-type supercharger in function. Only single camshafts are allowed. There are two common bore-stroke combinations: 4.1875 by 4.50 inches (106.36 × 114 mm) (called a 3/4 stroker) and 4.25 by 4.375 inches (108 × 111.1 mm) (called a 5/8 stroker). The 3/4 stroker is the most common combination used today and equals 496 CID (8.1 L).

Engine blocks are usually made out of billet. Crankshafts are CNC machine carved from a single piece of steel billet then nitrided in an oven to increase surface hardness. Intake valves are titanium and of 2.40-inch (61 mm) width, while exhaust valves are 1.90-inch (48 mm) width of Inconel. Every funny car has ballistic blankets covering specific parts of the engine prone to explosion, namely the supercharger.

Funny car fuel systems are key to their immense power. During a single run (starting, burnout, backing up, staging, 1/4 mile) cars can burn as much as 15 US gallons (12 imp gal; 57 L) of fuel. The fuel mixture is usually 85–90% nitromethane with 10–15% methanol. The ratio of fuel to air can be as high as 1:1. Compression ratios vary from 6:1 to 7:1. The engines in funny cars commonly exhibit varying piston heights and ratios that are determined by the piston's proximity to the air intake. Funny cars have a fixed gear ratio of 3.20:1 and have a reversing gear; power is transmitted from engine to final drive through a multiple staged clutch which provides progressive incremental lockup as the run proceeds. The rate/degree of lockup is mechanically/pneumatically controlled and preset before each run according to various conditions, in particular track surface. Wheelbase is between 100 and 125 inches (2.5 and 3.2 m). The car must maintain a 3-inch (76 mm) ground clearance.

Horsepower claims very widely—from 6,978 to 8,897—but are probably around 8,000 HP. Supercharged, nitromethane-fueled motors of this type derive their extremely high speeds from their torque, which is estimated at about 7,000 ft·lbf (9,500 N·m). They routinely achieve a 6G acceleration from a standing start.

Safety[link]

Many safety rules are in place to protect the driver and fans. The more visible accoutrements are the twin parachutes to help stabilize and decelerate the car after crossing the finish line.

During safety evaluations in the wake of the fatal crash of Scott Kalitta on June 21, 2008 in Englishtown, N.J., the NHRA reduced the distance of Top Fuel and Funny Car races to 1,000 feet effective July 2, 2008. Pro Stock and sportsman classes still race to 1,320 feet.

Origins and name[link]

The first funny cars were built in the mid-'60s and so-called because the rear wheels had been moved forward on the chassis to improve weight transfer under acceleration, increasing traction on the rear tires, which were oversized compared to stock. Looking at the cars, they didn't quite look stock, hence the name "funny." Many of the older cars are still raced today in the NHRA Heritage Hot Rod Racing Series, including the National Hot Rod Reunion and the California Hot Rod Reunion.

NHRA Top Fuel Funny Car champions (1974–2011)[link]

• 1974 - Shirl Greer
• 1975 - Don Prudhomme
• 1976 - Don Prudhomme
• 1977 - Don Prudhomme
• 1978 - Don Prudhomme
• 1979 - Raymond Beadle
• 1980 - Raymond Beadle
• 1981 - Raymond Beadle
• 1982 - Frank Hawley
• 1983 - Frank Hawley
• 1984 - Mark Oswald
• 1985 - Kenny Bernstein
• 1986 - Kenny Bernstein
• 1987 - Kenny Bernstein
• 1988 - Kenny Bernstein
• 1989 - Bruce Larson
• 1990 - John Force
• 1991 - John Force
• 1992 - Cruz Pedregon
• 1993 - John Force
• 1994 - John Force
• 1995 - John Force
• 1996 - John Force
• 1997 - John Force
• 1998 - John Force
• 1999 - John Force
• 2000 - John Force
• 2001 - John Force
• 2002 - John Force
• 2003 - Tony Pedregon
• 2004 - John Force
• 2005 - Gary Scelzi
• 2006 - John Force
• 2007 - Tony Pedregon
• 2008 - Cruz Pedregon
• 2009 - Robert Hight
• 2010 - John Force
• 2011 - Matt Hagan

References[link]

1. ^ The Serious Business of Funny Car Aerodynamics, General Motors

External links[link]

• NHRA National Hot Rod Association Website
• IHRA International Hot Rod Association Website
• Drag Race Central

Automobile
Benz "Velo" model (1894) – entered into an early automobile race as a motocycle[1][2]
Classification	Vehicle
Industry	Various
Application	Transportation
Fuel source	Gasoline, Diesel, Electric, Hydrogen
Powered	Yes
Self-propelled	Yes
Wheels	3–4
Axles	0–2
Inventor	Ferdinand Verbiest

Passenger cars in 2000

World map of passenger cars per 1000 people

An automobile, autocar, motor car or car is a wheeled motor vehicle used for transporting passengers, which also carries its own engine or motor. Most definitions of the term specify that automobiles are designed to run primarily on roads, to have seating for one to eight people, to typically have four wheels, and to be constructed principally for the transport of people rather than goods.^[3]

The term motorcar has also been used in the context of electrified rail systems to denote a car which functions as a small locomotive but also provides space for passengers and baggage. These locomotive cars were often used on suburban routes by both interurban and intercity railroad systems.^[4]

There are approximately 600 million passenger cars worldwide (roughly one car per eleven people).^[5][6] Around the world, there were about 806 million cars and light trucks on the road in 2007; the engines of these burn over a billion cubic meters (260 billion US gallons) of petrol/gasoline and diesel fuel yearly. The numbers are increasing rapidly, especially in China and India.^[7]

Etymology[link]

The word automobile comes, via the French automobile from the Ancient Greek word αὐτός (autós, "self") and the Latin mobilis ("movable"); meaning a vehicle that moves itself. The alternative name car is believed to originate from the Latin word carrus or carrum ("wheeled vehicle"), or the Middle English word carre ("cart") (from Old North French), in turn these are said to have originated from the Gaulish word karros (a Gallic Chariot).^[8][9]

History[link]

The first working steam-powered vehicle was likely to have been designed by Ferdinand Verbiest, a Flemish member of a Jesuit mission in China around 1672. It was a 65 cm-long scale-model toy for the Chinese Emperor, that was unable to carry a driver or a passenger.^[10][11][12] It is not known if Verbiest's model was ever built.^[11]

Nicolas-Joseph Cugnot is widely credited with building the first self-propelled mechanical vehicle or automobile in about 1769; he created a steam-powered tricycle.^[13] He also constructed two steam tractors for the French Army, one of which is preserved in the French National Conservatory of Arts and Crafts.^[14] His inventions were however handicapped by problems with water supply and maintaining steam pressure.^[14] In 1801, Richard Trevithick built and demonstrated his Puffing Devil road locomotive, believed by many to be the first demonstration of a steam-powered road vehicle. It was unable to maintain sufficient steam pressure for long periods, and was of little practical use.

In 1807 Nicéphore Niépce and his brother Claude probably created the world's first internal combustion engine which they called a Pyréolophore, but they chose to install it in a boat on the river Saone in France.^[15] Coincidentally, in 1807 the Swiss inventor François Isaac de Rivaz designed his own 'de Rivaz internal combustion engine' and used it to develop the world's first vehicle to be powered by such an engine. The Niépces' Pyréolophore was fuelled by a mixture of Lycopodium powder (dried Lycopodium moss), finely crushed coal dust and resin that were mixed with oil, whereas de Rivaz used a mixture of hydrogen and oxygen.^[15] Neither design was very successful, as was the case with others, such as Samuel Brown, Samuel Morey, and Etienne Lenoir with his hippomobile, who each produced vehicles (usually adapted carriages or carts) powered by clumsy internal combustion engines.^[16]

In November 1881, French inventor Gustave Trouvé demonstrated a working three-wheeled automobile powered by electricity at the International Exposition of Electricity, Paris.^[17]

Karl Benz, the inventor of the modern automobile

Although several other German engineers (including Gottlieb Daimler, Wilhelm Maybach, and Siegfried Marcus) were working on the problem at about the same time, Karl Benz generally is acknowledged as the inventor of the modern automobile.^[16]

An automobile powered by his own four-stroke cycle gasoline engine was built in Mannheim, Germany by Karl Benz in 1885, and granted a patent in January of the following year under the auspices of his major company, Benz & Cie., which was founded in 1883. It was an integral design, without the adaptation of other existing components, and included several new technological elements to create a new concept. He began to sell his production vehicles in 1888.

A photograph of the original Benz Patent-Motorwagen, first built in 1885 and awarded the patent for the concept

In 1879, Benz was granted a patent for his first engine, which had been designed in 1878. Many of his other inventions made the use of the internal combustion engine feasible for powering a vehicle.

His first Motorwagen was built in 1885, and he was awarded the patent for its invention as of his application on January 29, 1886. Benz began promotion of the vehicle on July 3, 1886, and about 25 Benz vehicles were sold between 1888 and 1893, when his first four-wheeler was introduced along with a model intended for affordability. They also were powered with four-stroke engines of his own design. Emile Roger of France, already producing Benz engines under license, now added the Benz automobile to his line of products. Because France was more open to the early automobiles, initially more were built and sold in France through Roger than Benz sold in Germany.

Bertha Benz, the first long distance automobile driver in the world

In August 1888 Bertha Benz, the wife of Karl Benz, undertook the first road trip by car, to prove the road-worthiness of her husband's invention.

In 1896, Benz designed and patented the first internal-combustion flat engine, called boxermotor. During the last years of the nineteenth century, Benz was the largest automobile company in the world with 572 units produced in 1899 and, because of its size, Benz & Cie., became a joint-stock company.

The first motor car in central Europe and one of the first factory-made cars in world, was produced by czech company Nesselsdorfer Wagenbau (later renamed to Tatra) in 1897, the Präsident automobil.

Daimler and Maybach founded Daimler Motoren Gesellschaft (DMG) in Cannstatt in 1890, and sold their first automobile in 1892 under the brand name, Daimler. It was a horse-drawn stagecoach built by another manufacturer, that they retrofitted with an engine of their design. By 1895 about 30 vehicles had been built by Daimler and Maybach, either at the Daimler works or in the Hotel Hermann, where they set up shop after disputes with their backers. Benz, Maybach and the Daimler team seem to have been unaware of each others' early work. They never worked together; by the time of the merger of the two companies, Daimler and Maybach were no longer part of DMG.

Daimler died in 1900 and later that year, Maybach designed an engine named Daimler-Mercedes, that was placed in a specially ordered model built to specifications set by Emil Jellinek. This was a production of a small number of vehicles for Jellinek to race and market in his country. Two years later, in 1902, a new model DMG automobile was produced and the model was named Mercedes after the Maybach engine which generated 35 hp. Maybach quit DMG shortly thereafter and opened a business of his own. Rights to the Daimler brand name were sold to other manufacturers.

Karl Benz proposed co-operation between DMG and Benz & Cie. when economic conditions began to deteriorate in Germany following the First World War, but the directors of DMG refused to consider it initially. Negotiations between the two companies resumed several years later when these conditions worsened and, in 1924 they signed an Agreement of Mutual Interest, valid until the year 2000. Both enterprises standardized design, production, purchasing, and sales and they advertised or marketed their automobile models jointly, although keeping their respective brands. On June 28, 1926, Benz & Cie. and DMG finally merged as the Daimler-Benz company, baptizing all of its automobiles Mercedes Benz, as a brand honoring the most important model of the DMG automobiles, the Maybach design later referred to as the 1902 Mercedes-35 hp, along with the Benz name. Karl Benz remained a member of the board of directors of Daimler-Benz until his death in 1929, and at times, his two sons participated in the management of the company as well.

In 1890, Émile Levassor and Armand Peugeot of France began producing vehicles with Daimler engines, and so laid the foundation of the automobile industry in France.

The first design for an American automobile with a gasoline internal combustion engine was made in 1877 by George Selden of Rochester, New York. Selden applied for a patent for an automobile in 1879, but the patent application expired because the vehicle was never built. After a delay of sixteen years and a series of attachments to his application, on November 5, 1895, Selden was granted a United States patent (U.S. Patent 549,160) for a two-stroke automobile engine, which hindered, more than encouraged, development of automobiles in the United States. His patent was challenged by Henry Ford and others, and overturned in 1911.

In 1893, the first running, gasoline-powered American car was built and road-tested by the Duryea brothers of Springfield, Massachusetts. The first public run of the Duryea Motor Wagon took place on September 21, 1893, on Taylor Street in Metro Center Springfield.^[18][19] To construct the Duryea Motor Wagon, the brothers had purchased a used horse-drawn buggy for $70 and then installed a 4 HP, single cylinder gasoline engine.^[18] The car had a friction transmission, spray carburetor, and low tension ignition. It was road-tested again on November 10, when the The Springfield Republican newspaper made the announcement.^[18] This particular car was put into storage in 1894 and stayed there until 1920 when it was rescued by Inglis M. Uppercu and presented to the United States National Museum.^[18]

In Britain, there had been several attempts to build steam cars with varying degrees of success, with Thomas Rickett even attempting a production run in 1860.^[20] Santler from Malvern is recognized by the Veteran Car Club of Great Britain as having made the first petrol-powered car in the country in 1894^[21] followed by Frederick William Lanchester in 1895, but these were both one-offs.^[21] The first production vehicles in Great Britain came from the Daimler Motor Company, a company founded by Harry J. Lawson in 1896, after purchasing the right to use the name of the engines. Lawson's company made its first automobiles in 1897, and they bore the name Daimler.^[21]

In 1892, German engineer Rudolf Diesel was granted a patent for a "New Rational Combustion Engine". In 1897, he built the first Diesel Engine.^[16] Steam-, electric-, and gasoline-powered vehicles competed for decades, with gasoline internal combustion engines achieving dominance in the 1910s.

Although various pistonless rotary engine designs have attempted to compete with the conventional piston and crankshaft design, only Mazda's version of the Wankel engine has had more than very limited success.

Mass production[link]

Ransom E. Olds

The large-scale, production-line manufacturing of affordable automobiles was debuted by Ransom Olds at his Oldsmobile factory in 1902 based on the assembly line techniques pioneered by Marc Isambard Brunel at the Portsmouth Block Mills, England in 1802. The assembly line style of mass production and interchangeable parts had been pioneered in the U.S. by Thomas Blanchard in 1821, at the Springfield Armory in Springfield, Massachusetts.^[22] This concept was greatly expanded by Henry Ford, beginning in 1914.

As a result, Ford's cars came off the line in fifteen minute intervals, much faster than previous methods, increasing productivity eightfold (requiring 12.5 man-hours before, 1 hour 33 minutes after), while using less manpower.^[23] It was so successful, paint became a bottleneck. Only Japan black would dry fast enough, forcing the company to drop the variety of colors available before 1914, until fast-drying Duco lacquer was developed in 1926. This is the source of Ford's apocryphal remark, "any color as long as it's black".^[23] In 1914, an assembly line worker could buy a Model T with four months' pay.^[23]

Portrait of Henry Ford (ca. 1919)

Ford's complex safety procedures—especially assigning each worker to a specific location instead of allowing them to roam about—dramatically reduced the rate of injury. The combination of high wages and high efficiency is called "Fordism," and was copied by most major industries. The efficiency gains from the assembly line also coincided with the economic rise of the United States. The assembly line forced workers to work at a certain pace with very repetitive motions which led to more output per worker while other countries were using less productive methods.

In the automotive industry, its success was dominating, and quickly spread worldwide seeing the founding of Ford France and Ford Britain in 1911, Ford Denmark 1923, Ford Germany 1925; in 1921, Citroen was the first native European manufacturer to adopt the production method. Soon, companies had to have assembly lines, or risk going broke; by 1930, 250 companies which did not, had disappeared.^[23]

Development of automotive technology was rapid, due in part to the hundreds of small manufacturers competing to gain the world's attention. Key developments included electric ignition and the electric self-starter (both by Charles Kettering, for the Cadillac Motor Company in 1910–1911), independent suspension, and four-wheel brakes.

Ford Model T, 1927, regarded as the first affordable American automobile

Since the 1920s, nearly all cars have been mass-produced to meet market needs, so marketing plans often have heavily influenced automobile design. It was Alfred P. Sloan who established the idea of different makes of cars produced by one company, so buyers could "move up" as their fortunes improved.

Reflecting the rapid pace of change, makes shared parts with one another so larger production volume resulted in lower costs for each price range. For example, in the 1930s, LaSalles, sold by Cadillac, used cheaper mechanical parts made by Oldsmobile; in the 1950s, Chevrolet shared hood, doors, roof, and windows with Pontiac; by the 1990s, corporate powertrains and shared platforms (with interchangeable brakes, suspension, and other parts) were common. Even so, only major makers could afford high costs, and even companies with decades of production, such as Apperson, Cole, Dorris, Haynes, or Premier, could not manage: of some two hundred American car makers in existence in 1920, only 43 survived in 1930, and with the Great Depression, by 1940, only 17 of those were left.^[23]

In Europe much the same would happen. Morris set up its production line at Cowley in 1924, and soon outsold Ford, while beginning in 1923 to follow Ford's practise of vertical integration, buying Hotchkiss (engines), Wrigley (gearboxes), and Osberton (radiators), for instance, as well as competitors, such as Wolseley: in 1925, Morris had 41% of total British car production. Most British small-car assemblers, from Abbey to Xtra had gone under. Citroen did the same in France, coming to cars in 1919; between them and other cheap cars in reply such as Renault's 10CV and Peugeot's 5CV, they produced 550,000 cars in 1925, and Mors, Hurtu, and others could not compete.^[23] Germany's first mass-manufactured car, the Opel 4PS Laubfrosch (Tree Frog), came off the line at Russelsheim in 1924, soon making Opel the top car builder in Germany, with 37.5% of the market.^[23]

Weight[link]

The weight of a car influences fuel consumption and performance, with more weight resulting in increased fuel consumption and decreased performance. According to a research conducted by Julian Allwood of the University of Cambridge, global energy use could be heavily reduced by using lighter cars, and an average weight of 500 kg has been said to be well achievable.^[24]

In some competitions such as the Shell Eco Marathon, average car weights of 45 kg have also been achieved.^[25][26] These cars are only single-seaters (still falling within the definition of a car, although 4-seater cars are more common), but it nevertheless demonstrates the huge degree in which car weights can still be reduced, and the subsequent lower fuel use (i.e. up to a fuel use of 2560 km/l.^[27]

Seating and body style[link]

Most cars are designed to carry multiple occupants, often with four or five seats. Larger cars can often carry six, seven or more occupants depending in the internal arrange of seats. Sports cars are often designed with only two seats, and very occasionally three seats. The differing needs for passenger capacity and their luggage has resulted in a large variety of body styles to suit personal requirements such as the sedan/saloon, hatchback, station wagon/estate and Multi-Purpose Vehicle/Minivan.

Fuel and propulsion technologies[link]

The Nissan Leaf is an all-electric car launched in December 2010

Most automobiles in use today are propelled by a internal combustion engine, fueled by deflagration of gasoline (also known as petrol) or diesel. Both fuels are known to cause air pollution and are also blamed for contributing to climate change and global warming.^[28] Rapidly increasing oil prices, concerns about oil dependence, tightening environmental laws and restrictions on greenhouse gas emissions are propelling work on alternative power systems for automobiles. Efforts to improve or replace existing technologies include the development of hybrid vehicles, plug-in electric vehicles and hydrogen vehicles. Vehicles using alternative fuels such as ethanol flexible-fuel vehicles and natural gas vehicles are also gaining popularity in some countries.

Safety[link]

Result of a serious automobile accident

While road traffic injuries represent the leading cause in worldwide injury-related deaths,^[29] their popularity undermines this statistic.

Mary Ward became one of the first documented automobile fatalities in 1869 in Parsonstown, Ireland^[30] and Henry Bliss one of the United States' first pedestrian automobile casualties in 1899 in New York.^[31] There are now standard tests for safety in new automobiles, like the EuroNCAP and the US NCAP tests,^[32] and insurance industry-backed tests by the Insurance Institute for Highway Safety (IIHS).^[33]

Costs and benefits[link]

The costs of automobile usage, which may include the cost of: acquiring the vehicle, repairs, maintenance, fuel, depreciation, injury, driving time, parking fees, tire replacement, taxes, and insurance,^[34] are weighed against the cost of the alternatives, and the value of the benefits – perceived and real – of vehicle usage. The benefits may include on-demand transportation, mobility, independence and convenience.^[12]

Similarly the costs to society of encompassing automobile use, which may include those of: maintaining roads, land use, pollution, public health, health care, and of disposing of the vehicle at the end of its life, can be balanced against the value of the benefits to society that automobile use generates. The societal benefits may include: economy benefits, such as job and wealth creation, of automobile production and maintenance, transportation provision, society wellbeing derived from leisure and travel opportunities, and revenue generation from the tax opportunities. The ability for humans to move flexibly from place to place has far reaching implications for the nature of societies.^[35]

Criticism[link]

The examples and perspective in this section may not represent a worldwide view of the subject. Please improve this article and discuss the issue on the talk page. (June 2010)

Transportation is a major contributor to air pollution in most industrialised nations. According to the American Surface Transportation Policy Project nearly half of all Americans are breathing unhealthy air. Their study showed air quality in dozens of metropolitan areas has worsened over the last decade.^[36] In the United States the average passenger car emits 11,450 pounds (5,190 kg) of the greenhouse gas, carbon dioxide annually, along with smaller amounts of carbon monoxide, hydrocarbons, and nitrogen.^[37]

Animals and plants are often negatively impacted by automobiles via habitat destruction and pollution. Over the lifetime of the average automobile the "loss of habitat potential" may be over 50,000 square meters (540,000 sq ft) based on primary production correlations.^[38] Millions of animals are also killed every year on roads by automobiles—so-called Roadkill.^{[citation needed]}

Growth in the popularity of vehicles and commuting has led to traffic congestion. Brussels is considered Europe's most congested city.^[39]

Fuel taxes may act as an incentive for the production of more efficient, hence less polluting, car designs (e.g. hybrid vehicles) and the development of alternative fuels. High fuel taxes may provide a strong incentive for consumers to purchase lighter, smaller, more fuel-efficient cars, or to not drive. On average, today's automobiles are about 75 percent recyclable, and using recycled steel helps reduce energy use and pollution.^[40] In the United States Congress, federally mandated fuel efficiency standards have been debated regularly, passenger car standards have not risen above the 27.5 miles per US gallon (8.55 L/100 km; 33.0 mpg_-imp) standard set in 1985. Light truck standards have changed more frequently, and were set at 22.2 miles per US gallon (10.6 L/100 km; 26.7 mpg_-imp) in 2007.^[41] Alternative fuel vehicles are another option that is less polluting than conventional petroleum powered vehicles.

Oil consumption in the twentieth and twenty-first centuries has been abundantly pushed by automobile growth; the 1985-2003 oil glut even fuelled the sales of low economy vehicles in OECD countries. The BRIC countries might also kick in, as China briefly was the first automobile market in December 2009.^[42]

Residents of low-density, residential-only sprawling communities are also more likely to die in car collisions^{[original research?]} which kill 1.2 million people worldwide each year, and injure about forty times this number.^[29] Sprawl is more broadly a factor in inactivity and obesity, which in turn can lead to increased risk of a variety of diseases.^[43]

Driverless cars[link]

A robotic Volkswagen Passat shown at Stanford University is a driverless car

Fully autonomous vehicles, also known as robotic cars, or driverless cars, already exist in prototype, and are expected to be commercially available around 2020. According to urban designer and futurist Michael E. Arth, driverless electric vehicles—in conjunction with the increased use of virtual reality for work, travel, and pleasure—could reduce the world's 800 million vehicles to a fraction of that number within a few decades.^[44] This would be possible if almost all private cars requiring drivers, which are not in use and parked 90% of the time, would be traded for public self-driving taxis that would be in near constant use. This would also allow for getting the appropriate vehicle for the particular need—a bus could come for a group of people, a limousine could come for a special night out, and a Segway could come for a short trip down the street for one person. Children could be chauffeured in supervised safety, DUIs would no longer exist, and 41,000 lives could be saved each year in the US alone.^[45][46]

Future car technologies[link]

This section needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. (June 2010)

Automobile propulsion technology under development include gasoline/electric and plug-in hybrids, battery electric vehicles, hydrogen cars, biofuels, and various alternative fuels. Research into future alternative forms of power include the development of fuel cells, Homogeneous Charge Compression Ignition (HCCI), Stirling engines,^[47] and even using the stored energy of compressed air or liquid nitrogen.

New materials which may replace steel car bodies include duraluminum, fiberglass, carbon fiber, and carbon nanotubes.

Telematics technology is allowing more and more people to share cars, on a pay-as-you-go basis, through car share and carpool schemes.

Communication is also evolving due to connected car systems.

Open source development[link]

There have been several projects aiming to develop a car on the principles of open design. The projects include OScar, Riversimple (through 40fires.org)^[48] and c,mm,n.^[49] None of the projects have reached significant success in terms of developing a car as a whole both from hardware and software perspective and no mass production ready open-source based design have been introduced as of late 2009. Some car hacking through on-board diagnostics (OBD) has been done so far.^[50]

Alternatives to the automobile[link]

Established alternatives for some aspects of automobile use include public transit such as buses, trolleybuses, trains, subways, tramways light rail, cycling, and walking. Car-share arrangements and carpooling are also increasingly popular–the US market leader in car-sharing has experienced double-digit growth in revenue and membership growth between 2006 and 2007, offering a service that enables urban residents to "share" a vehicle rather than own a car in already congested neighborhoods.^[51] Bike-share systems have been tried in some European cities, including Copenhagen and Amsterdam. Similar programs have been experimented with in a number of US Cities.^[52] Additional individual modes of transport, such as personal rapid transit could serve as an alternative to automobiles if they prove to be socially accepted.^[53]

Industry[link]

The automotive industry designs, develops, manufactures, markets, and sells the world's motor vehicles. In 2008, more than 70 million motor vehicles, including cars and commercial vehicles were produced worldwide.^[54]

In 2007, a total of 71.9 million new automobiles were sold worldwide: 22.9 million in Europe, 21.4 million in the Asia-Pacific Region, 19.4 million in the USA and Canada, 4.4 million in Latin America, 2.4 million in the Middle East and 1.4 million in Africa.^[55] The markets in North America and Japan were stagnant, while those in South America and other parts of Asia grew strongly. Of the major markets, China, Russia, Brazil and India saw the most rapid growth.

About 250 million vehicles are in use in the United States. Around the world, there were about 806 million cars and light trucks on the road in 2007; they burn over 260 billion US gallons (980,000,000 m³) of gasoline and diesel fuel yearly. The numbers are increasing rapidly, especially in China and India.^[7] In the opinion of some, urban transport systems based around the car have proved unsustainable, consuming excessive energy, affecting the health of populations, and delivering a declining level of service despite increasing investments. Many of these negative impacts fall disproportionately on those social groups who are also least likely to own and drive cars.^[56][57][58] The sustainable transport movement focuses on solutions to these problems.

In 2008, with rapidly rising oil prices, industries such as the automotive industry, are experiencing a combination of pricing pressures from raw material costs and changes in consumer buying habits. The industry is also facing increasing external competition from the public transport sector, as consumers re-evaluate their private vehicle usage.^[59] Roughly half of the US's fifty-one light vehicle plants are projected to permanently close in the coming years, with the loss of another 200,000 jobs in the sector, on top of the 560,000 jobs lost this decade.^[60] Combined with robust growth in China, in 2009, this resulted in China becoming the largest automobile producer and market in the world. China 2009 sales had increased to 13.6 million, a significant increase from one million of domestic car sales in 2000.^[61]

See also[link]

Cars portal

References[link]

Further reading[link]

External links[link]

Wikisource has original text related to this article: California AB 1493

• Media related to Automobile at Wikimedia Commons
• The Wiktionary entry for automobile
• Fédération Internationale de l'Automobile
• Forum for the Automobile and Society