Internet Control Message Protocol version 6 is the implementation of the Internet Control Message Protocol for Internet Protocol version 6 defined in RFC 4443. ICMPv6 is an integral part of IPv6 and performs error reporting, diagnostic functions, and a framework for extensions to implement future changes. Several extensions have been published, defining new ICMPv6 message types as well as new options for existing ICMPv6 message types. Neighbor Discovery Protocol (NDP) is a node discovery protocol in IPv6 which replaces and enhances functions of ARP. Secure Neighbor Discovery Protocol (SEND) is an extension of NDP with extra security. Multicast Router Discovery (MRD) allows discovery of multicast routers. Technical details ICMPv6 messages may be classified into two categories: error messages and information messages. ICMPv6 messages are transported by IPv6 packets in which the IPv6 Next Header value for ICMPv6 is set to 58. Packet format The ICMPv6 packet consists of a header and the protocol payload. The header contains only three fields: type (8 bits), code (8 bits), and checksum (16 bits). type specifies the type of the message. Values in the range from 0 to 127 (high-order bit is 0) indicate an error message, while values in the range from 128 to 255 (high-order bit is 1) indicate an information message. The code field value depends on the message type and provides an additional level of message granularity. The checksum field provides a minimal level of integrity verification for the ICMP message. Types of ICMPv6 messages Note that the table above is not comprehensive. The current complete list of assigned ICMPv6 types can be found at this link: IANA: ICMPv6 Parameters. Operation Message checksum ICMPv6 provides a minimal level of message integrity verification by the inclusion of a 16-bit checksum in its header. The checksum is calculated starting with a pseudo-header of IPv6 header fields according to the IPv6 standard, which consists of the source and destination addresses, the packet length and the next header field, the latter of which is set to the value 58. Following this pseudo header, the checksum is continued with the ICMPv6 message in which the checksum is initially set to zero. The checksum computation is performed according to Internet protocol standards using 16-bit ones' complement summation, followed by complementing the checksum itself and inserting it into the checksum field. Note that this differs from the way it is calculated for IPv4 in ICMP, but is similar to the calculation done in TCP. Message processing When an ICMPv6 node receives a packet, it must undertake actions that depend on the type of message. The ICMPv6 protocol must limit the number of error messages sent to the same destination to avoid network overloading. For example, if a node continues to forward erroneous packets, ICMP will signal the error to the first packet and then do so periodically, with a fixed minimum period or with a fixed network maximum load. An ICMP error message must never be sent in response to another ICMP error message.This is a synthesized speech reading of the Wikipedia article "ICMPv6" and is intended primarily for blind and visually impaired individuals who can not view Wikipedia. This video can also be used for mobile users who wish to listen to Wikipedia articles on the go, or by those who wish to learn a second language by reading the captions in that language while listening in English. Original article available at http://en.wikipedia.org/wiki/ICMPv6 All text from Wikipedia is licensed under CC-BY-SA: https://en.wikipedia.org/wiki/Wikipedia:Reusing_Wikipedia_content "You are free ... to make commercial use of the work": http://creativecommons.org/licenses/by-sa/3.0/ Text-to-speech synthesized from FestVox, which permits commercial use: "no restrictions on its use (commercial or otherwise)" http://festvox.org/festival/downloads.html Note: all these licenses permit commercial use, and therefore we are permitted to monetize videos derived from these contents.

• published: 24 Aug 2013
• views: 0