The chemical compound silicon dioxide, also known as silica (from the Latin silex), is an oxide of silicon with the chemical formula SiO2. It has been known for its hardness since ancient times. Silica is most commonly found in nature as sand or quartz, as well as in the cell walls of diatoms.[2][3]
Silica is manufactured in several forms including fused quartz, crystal, fumed silica (or pyrogenic silica), colloidal silica, silica gel, and aerogel.
Silica is used primarily in the production of glass for windows, drinking glasses, beverage bottles, and many other uses. The majority of optical fibers for telecommunications are also made from silica. It is a primary raw material for many whiteware ceramics such as earthenware, stoneware, porcelain, as well as industrial Portland cement.
Silica is a common additive in the production of foods, where it is used primarily as a flow agent in powdered foods, or to absorb water in hygroscopic applications. It is the primary component of diatomaceous earth which has many uses ranging from filtration to insect control. It is also the primary component of rice husk ash which is used, for example, in filtration and cement manufacturing.
Thin films of silica grown on silicon wafers via thermal oxidation methods can be quite beneficial in microelectronics, where they act as electric insulators with high chemical stability. In electrical applications, it can protect the silicon, store charge, block current, and even act as a controlled pathway to limit current flow.[4]
A silica-based aerogel was used in the Stardust spacecraft to collect extraterrestrial particles. Silica is also used in the extraction of DNA and RNA due to its ability to bind to the nucleic acids under the presence of chaotropes. As hydrophobic silica it is used as a defoamer component. In hydrated form, it is used in toothpaste as a hard abrasive to remove tooth plaque.
In its capacity as a refractory, it is useful in fiber form as a high-temperature thermal protection fabric. In cosmetics, it is useful for its light-diffusing properties and natural absorbency. Colloidal silica is used as a wine and juice fining agent. In pharmaceutical products, silica aids powder flow when tablets are formed. It is also used as a thermal enhancement compound in ground source heat pump industry.
Tetrahedral coordination of silica (SiO
2), the basic building block of the most ideal glass former.
In the majority of silicates, the Si atom shows tetrahedral coordination, with 4 oxygen atoms surrounding a central Si atom. The most common example is seen in the quartz crystalline form of silica SiO2. In each of the most thermodynamically stable crystalline forms of silica, on average, all 4 of the vertices (or oxygen atoms) of the SiO4 tetrahedra are shared with others, yielding the net chemical formula: SiO2.
The amorphous structure of glassy
silica (SiO
2) in two-dimensions. No long-range order is present; however there is local ordering with respect to the
tetrahedral arrangement of oxygen (O) atoms around the silicon (Si) atoms. Note that a fourth oxygen atom is bonded to each silicon atom, either behind the plane of the screen or in front of it; these atoms are omitted for clarity.
For example, in the unit cell of α-quartz, the central tetrahedron shares all 4 of its corner O atoms, the 2 face-centered tetrahedra share 2 of their corner O atoms, and the 4 edge-centered terahedra share just one of their O atoms with other SiO4 tetrahedra. This leaves a net average of 12 out of 24 total vertices for that portion of the 7 SiO4 tetrahedra which are considered to be a part of the unit cell for silica (see 3-D Unit Cell).
SiO2 has a number of distinct crystalline forms (polymorphs) in addition to amorphous forms. With the exception of stishovite and fibrous silica, all of the crystalline forms involve tetrahedral SiO4 units linked together by shared vertices in different arrangements. Silicon-oxygen bond lengths vary between the different crystal forms, for example in α-quartz the bond length is 161 pm, whereas in α-tridymite it is in the range 154–171 pm. The Si-O-Si angle also varies between a low value of 140° in α-tridymite, up to 180° in β-tridymite. In α-quartz the Si-O-Si angle is 144°.[6]
Fibrous silica has a structure similar to that of SiS2 with chains of edge-sharing SiO4 tetrahedra. Stishovite, the higher pressure form, in contrast has a rutile like structure where silicon is 6 coordinate. The density of stishovite is 4.287 g/cm3, which compares to α-quartz, the densest of the low pressure forms, which has a density of 2.648 g/cm3.[7] The difference in density can be ascribed to the increase in coordination as the six shortest Si-O bond lengths in stishovite (four Si-O bond lengths of 176 pm and two others of 181 pm) are greater than the Si-O bond length (161 pm) in α-quartz.[8] The change in the coordination increases the ionicity of the Si-O bond.[9] But more important is the observation that any deviations from these standard parameters constitute microstructural differences or variations which represent an approach to an amorphous, vitreous or glassy solid.
Note that the only stable form under normal conditions is α-quartz and this is the form in which crystalline silicon dioxide is usually encountered. In nature impurities in crystalline α-quartz can give rise to colors (see list).
Note also that both high temperature minerals, cristobalite and tridymite, have both a lower density and index of refraction than quartz. Since the composition is identical, the reason for the discrepancies must be in the increased spacing in the high temperature minerals. As is common with many substances, the higher the temperature the farther apart the atoms due to the increased vibration energy.
The high pressure minerals, seifertite, stishovite, and coesite, on the other hand, have a higher density and index of refraction when compared to quartz. This is probably due to the intense compression of the atoms that must occur during their formation, resulting in a more condensed structure.
Faujasite silica is another form of crystalline silica. It is obtained by dealumination of a low-sodium, ultra-stable Y zeolite with a combined acid and thermal treatment. The resulting product contains over 99% silica, has high crystallinity and high surface area (over 800 m2/g). Faujasite-silica has very high thermal and acid stability. For example, it maintains a high degree of long-range molecular order (or crystallinity) even after boiling in concentrated hydrochloric acid.[10]
Molten silica exhibits several peculiar physical characteristics that are similar to the ones observed in liquid water: negative temperature expansion, density maximum (at temperatures ~5000 °C), and a heat capacity minimum.[11] Its density decreases from 2.08 g/cm3 at 1950 °C to 2.03 g/cm3 at 2200 °C.[12] When molecular silicon monoxide, SiO, is condensed in an argon matrix cooled with helium along with oxygen atoms generated by microwave discharge, molecular SiO2 is produced which has a linear structure. Dimeric silicon dioxide, (SiO2)2 has been prepared by reacting O2 with matrix isolated dimeric silicon monoxide, (Si2O2). In dimeric silicon dioxide there are two oxygen atoms bridging between the silicon atoms with an Si-O-Si angle of 94° and bond length of 164.6 pm and the terminal Si-O bond length is 150.2 pm. The Si-O bond length is 148.3 pm which compares with the length of 161 pm in α-quartz. The bond energy is estimated at 621.7 kJ/mol.[13]
Crystalline forms of SiO2[6]
| Form |
Crystal symmetry
Pearson symbol, group No. |
ρ
g/cm3 |
Notes |
Structure |
| α-quartz |
rhombohedral (trigonal)
hP9, P3121 No.152[14] |
2.648 |
Helical chains making individual single crystals optically active; α-quartz converts to β-quartz at 846 K |
 |
| β-quartz |
hexagonal
hP18, P6222, No.180[15] |
2.533 |
closely related to α-quartz (with an Si-O-Si angle of 155°) and optically active; β-quartz converts to β-tridymite at 1140 K |
 |
| α-tridymite |
orthorhombic
oS24, C2221, No.20[16] |
2.265 |
metastable form under normal pressure |
100px |
| β-tridymite |
hexagonal
hP12, P63/mmc, No. 194[16] |
|
closely related to α-tridymite; β-tridymite converts to β-cristobalite at 2010 K |
 |
| α-cristobalite |
tetragonal
tP12, P41212, No. 92[17] |
2.334 |
metastable form under normal pressure |
100px |
| β-cristobalite |
cubic
cF104, Fd3m, No.227[18] |
|
closely related to α-cristobalite; melts at 1978 K |
 |
| faujasite |
cubic
cF576, Fd3m, No.227[19] |
1.92 |
sodalite cages connected by hexagonal prisms; 12-membered ring pore opening; faujasite structure.[10] |
 |
| melanophlogite |
cubic (cP*, P4232, No.208)[5] or tetragonal (P42/nbc)[20] |
2.04 |
Si5O10, Si6O12 rings; mineral always found with hydrocarbons in interstitial spaces-a clathrasil[21] |
100px |
| keatite |
tetragonal
tP36, P41212, No. 92[22] |
3.011 |
Si5O10, Si4O14, Si8O16 rings; synthesised from glassy silica and alkali at 600–900K and 40–400 MPa |
100px |
| moganite |
monoclinic
mS46, C2/c, No.15[23] |
|
Si4O8 and Si6O12 rings |
100px |
| coesite |
monoclinic
mS48, C2/c, No.15[24] |
2.911 |
Si4O8 and Si8O16 rings; 900 K and 3–3.5 GPa |
 |
| stishovite |
Tetragonal
tP6, P42/mnm, No.136[25] |
4.287 |
One of the densest (together with seifertite) polymorphs of silica; rutile-like with 6-fold coordinated Si; 7.5–8.5 GPa |
 |
| fibrous |
orthorhombic
oI12, Ibam, No.72[26] |
1.97 |
like SiS2 consisting of edge sharing chains, melts at ~1700 K |
 |
| seifertite |
orthorhombic
oP, Pbcn[27] |
4.294 |
One of the densest (together with stishovite) polymorphs of silica; is produced at pressures above 40 GPa.[28] |
100px |
When silicon dioxide SiO2 is cooled rapidly enough, it does not crystallize but solidifies as a glass. The glass transition temperature of pure SiO2 is about 1600 K (1330 °C or 2420 °F). Like most of the crystalline polymorphs the local atomic structure in pure silica glass is regular tetrahedra of oxygen atoms around silicon atoms. The difference between the glass and the crystals arises in the connectivity of these tetrahedral units. SiO2 glass consists of a non-repeating network of tetrahedra, where all the oxygen corners connect two neighbouring tetrahedra. Although there is no long range periodicity in the glassy network there remains significant ordering at length scales well beyond the SiO bond length. One example of this ordering is found in the preference of the network to form rings of 6-tetrahedra.[29]
Manufactured silica fume at maximum surface area of 380 m
2/g
Silicon dioxide is formed when silicon is exposed to oxygen (or air). A very shallow layer (approximately 1 nm or 10 Å) of so-called native oxide is formed on the surface when silicon is exposed to air under ambient conditions. Higher temperatures and alternative environments are used to grow well-controlled layers of silicon dioxide on silicon, for example at temperatures between 600 and 1200 °C, using so-called dry or wet oxidation with O2 or H2O, respectively.[30] The depth of the layer of silicon replaced by the dioxide is 44% of the depth of the silicon dioxide layer produced.[30]
Alternative methods used to deposit a layer of SiO2 include[31]
- Low temperature oxidation (400–450 °C) of silane
-
- SiH4 + 2 O2 → SiO2 + 2 H2O.
-
- Si(OC2H5)4 → SiO2 + 2 H2O + 4 C2H4.
- Plasma enhanced chemical vapor deposition using TEOS at about 400 °C
-
- Si(OC2H5)4 + 12 O2 → SiO2 + 10 H2O + 8 CO2.
- Polymerization of tetraethyl orthosilicate (TEOS) at below 100 °C using amino acid as catalyst.[32]
Pyrogenic silica (sometimes called fumed silica or silica fume), which is a very fine particulate form of silicon dioxide, is prepared by burning SiCl4 in an oxygen rich hydrocarbon flame to produce a "smoke" of SiO2:[7]
- SiCl4 + 2 H2 + O2 → SiO2 + 4 HCl.
Amorphous silica, silica gel, is produced by the acidification of solutions of sodium silicate to produce a gelatinous precipitate that is then washed and then dehydrated to produce colorless microporous silica.[7]
Quartz exhibits a maximum solubility in water at temperatures about 340 °C.[33] This property is used to grow single crystals of quartz in a hydrothermal process where natural quartz is dissolved in superheated water in a pressure vessel which is cooler at the top. Crystals of 0.5–1 kg can be grown over a period of 1–2 months.[6] These crystals are a source of very pure quartz for use in electronic applications.[7]
Fluorine reacts with silicon dioxide to form SiF4 and O2 whereas the other halogen gases (Cl2, Br2, I2) react much less readily.[7]
Silicon dioxide is attacked by hydrofluoric acid (HF) to produce hexafluorosilicic acid:[6]
- SiO2 + 6 HF → H2SiF6 + 2 H2O.
HF is used to remove or pattern silicon dioxide in the semiconductor industry.
Silicon dioxide dissolves in hot concentrated alkali or fused hydroxide:[7]
- SiO2 + 2 NaOH → Na2SiO3 + H2O.
Silicon dioxide reacts with basic metal oxides (e.g. sodium oxide, potassium oxide, lead(II) oxide, zinc oxide, or mixtures of oxides forming silicates and glasses as the Si-O-Si bonds in silica are broken successively).[6] As an example the reaction of sodium oxide and SiO2 can produce sodium orthosilicate, sodium silicate, and glasses, dependent on the proportions of reactants:[7]
- 2 Na2O + SiO2 → Na4SiO4;
- Na2O + SiO2 → Na2SiO3;
- (0.25–0.8)Na2O + SiO2 → glass.
Examples of such glasses have commercial significance e.g. soda lime glass, borosilicate glass, lead glass. In these glasses, silica is termed the network former or lattice former.[6]
With silicon at high temperatures gaseous SiO is produced:[6]
- SiO2 + Si → 2 SiO (gas).
Silicon dioxide is used to produce elemental silicon. The process involves high temperature reduction with elemental carbon in an electric arc furnace:[34]
-
- SiO2(s) + 2C(s) → Si(s) + 2CO(g)
Silicification in and by cells has been common in the biological world for well over a billion years. In the modern world it occurs in bacteria, single-celled organisms, plants, and animals (invertebrates and vertebrates). Prominent examples include:
Crystalline minerals formed in the physiological environment often show exceptional physical properties (e.g. strength, hardness, fracture toughness) and tend to form hierarchical structures that exhibit microstructural order over a range of scales. The minerals are crystallized from an environment that is undersaturated with respect to silicon, and under conditions of neutral pH and low temperature (0–40 °C).
Formation of the mineral may occur either within the cell wall of an organism (such as with phytoliths), or outside the cell wall, as typically happens with tests. Specific biochemical reactions exist for mineral deposition. Such reactions include those that involve lipids, proteins, and carbohydrates.
It is unclear in what ways silica is important in the nutrition of metazoa. This is a challenging field of research, because silica is ubiquitous in the environment and in most circumstances dissolves in trace quantities only. All the same it certainly does occur in the living body, leaving us with the problem that it is hard to create proper silica-free controls for purposes of research. This makes it difficult to be sure when the silica present has had operative beneficial effects, and when its presence is coincidental, or even harmful. The current consensus is that it certainly seems important in the growth, strength, and management of many connective tissues. This is true not only for hard connective tissues such as bone and tooth.[35]
Quartz sand (silica) as main raw material for commercial glass production
Inhaling finely divided crystalline silica dust in very small quantities (OSHA allows 0.1 mg/m3) over time can lead to silicosis, bronchitis, or cancer, as the dust becomes lodged in the lungs and continuously irritates them, reducing lung capacities. (In the body crystalline silica particles do not dissolve over clinically relevant periods of time.) This effect can create an occupational hazard for people working with sandblasting equipment, products that contain powdered crystalline silica and so on. Children, asthmatics of any age, allergy sufferers, and the elderly (all of whom have reduced lung capacity) can be affected in much less time. Amorphous silica, such as fumed silica is not associated with development of silicosis,[36] but may cause irreversible lung damage in some cases.[37] Laws restricting silica exposure with respect to the silicosis hazard specify that they are concerned only with silica that is both crystalline and dust-forming.
Plant materials with high silica phytolith content, appear to be of importance to grazing animals, from chewing insects to ungulates. Studies have shown that it accelerates tooth wear, and high levels of silica in plants frequently eaten by herbivores may have developed as a defense mechanism against predation.[38][39]
A study which followed subjects for 15 years found that higher levels of silica in water appeared to decrease the risk of dementia. The study found that with an increase of 10 milligram-per-day of the intake of silica in drinking water, the risk of dementia dropped by 11%.[40]
- ^ a b Zumdahl, Steven S. (2009). Chemical Principles 6th Ed.. Houghton Mifflin Company. p. A22. ISBN 0-618-94690-X.
- ^ Iler, R.K. (1979). The Chemistry of Silica. Plenum Press. ISBN 0-471-02404-X.
- ^ Lynn Townsend White, Jr. (1961). "Eilmer of Malmesbury, an Eleventh Century Aviator: A Case Study of Technological Innovation, Its Context and Tradition". Technology and Culture (Society for the History of Technology) 2 (2): 97–111. DOI:10.2307/3101411. JSTOR 3101411.
- ^ Michael Riordan (2007) "The Silicon Dioxide Solution: How physicist Jean Hoerni built the bridge from the transistor to the integrated circuit" IEEE Spectrum.
- ^ a b Skinner B.J., Appleman D.E. (1963). "Melanophlogite, a cubic polymorph of silica". American Mineralogist 48: 854–867. http://www.minsocam.org/ammin/AM48/AM48_854.pdf.
- ^ a b c d e f g Holleman, A. F.; Wiberg, E. (2001), Inorganic Chemistry, San Diego: Academic Press, ISBN 0-12-352651-5
- ^ a b c d e f g Greenwood, Norman N.; Earnshaw, A. (1984). Chemistry of the Elements. Oxford: Pergamon. pp. 393–99. ISBN 0-08-022057-6.
- ^ Wells A.F. (1984). Structural Inorganic Chemistry. Oxford Science Publications. ISBN 0-19-855370-6.
- ^ Kirfel, A.; Krane, H. G.; Blaha, P.; Schwarz, K.; Lippmann, T. (2001). "Electron-density distribution in stishovite, SiO2: a new high-energy synchrotron-radiation study". Acta Crystallographica A 57 (6): 663. DOI:10.1107/S0108767301010698.
- ^ a b J. Scherzer (1978). "Dealuminated faujasite-type structures with SiO2/Al2O3 ratios over 100". Journal of Catalysis 54 (2): 285. DOI:10.1016/0021-9517(78)90051-9.
- ^ Shell, Scott M.; Pablo G. Debenedetti, Athanassios Z. Panagiotopoulos (2002). "Molecular structural order and anomalies in liquid silica". Phys. Rev. E 66: 011202. Bibcode 2002PhRvE..66a1202S. DOI:10.1103/PhysRevE.66.011202. http://www.engr.ucsb.edu/~shell/papers/2002_PRE_silica.pdf.
- ^ I. A. Aksay, J. A. Pask, and R. F. Davis (1979). [www.princeton.edu/~cml/assets/pdf/7962aksay.pdf "Densities of SiO2-Al2O3 Melts"]. Journal of the American Ceramic Society 62 (7-8): 332–336. DOI:10.1111/j.1151-2916.1979.tb19071.x. www.princeton.edu/~cml/assets/pdf/7962aksay.pdf.
- ^ Peter Jutzi, Ulrich Schubert (2003). Silicon chemistry: from the atom to extended systems. Wiley-VCH. ISBN 3-527-30647-1. http://books.google.com/?id=iRNDUz0F0rwC&pg=PP1.
- ^ Lager G.A., Jorgensen J.D., Rotella F.J. (1982). "Crystal structure and thermal expansion of a-quartz SiO2 at low temperature". Journal of Applied Physics 53 (10): 6751–6756. DOI:10.1063/1.330062.
- ^ Wright, A.F.; Lehmann, M.S. (1981). "The structure of quartz at 25 and 590°C determined by neutron diffraction". Journal of Solid State Chemistry 36 (3): 371–80. DOI:10.1016/0022-4596(81)90449-7.
- ^ a b Kihara, Kuniaki; Matsumoto, Takeo; Imamura, Moritaka (1986). "Structural change of orthorhombic-Itridymite with temperature: A study based on second-order thermal-vibrational parameters". Zeitschrift für Kristallographie 177: 27–38. DOI:10.1524/zkri.1986.177.1-2.27.
- ^ Downs R.T., Palmer D.C. (1994). "The pressure behavior of a cristobalite". American Mineralogist 79: 9–14. http://www.geo.arizona.edu/xtal/group/pdf/AM79_9.pdf.
- ^ Wright, A. F.; Leadbetter, A. J. (1975). "The structures of the β-cristobalite phases of SiO2 and AlPO4". Philosophical Magazine 31 (6): 1391–401. Bibcode 1975PMag...31.1391W. DOI:10.1080/00318087508228690.
- ^ Hriljac, J.A.; Eddy, M.M.; Cheetham, A.K.; Donohue, J.A.; Ray, G.J. (1993). "Powder Neutron Diffraction and 29Si MAS NMR Studies of Siliceous Zeolite-Y". Journal of Solid State Chemistry 106: 66–72. DOI:10.1006/jssc.1993.1265.
- ^ Nakagawa T, Kihara K, Harada K (2001). "The crystal structure of low melanophlogite". American Mineralogist 86: 1506. http://rruff.geo.arizona.edu/AMS/minerals/Melanophlogite.
- ^ Rosemarie Szostak (1998). Molecular sieves: Principles of Synthesis and Identification. Springer. ISBN 0-7514-0480-2. http://books.google.com/?id=lteintjA2-MC&printsec=frontcover.
- ^ Shropshire, Joseph; Keat, Paul P.; Vaughan, Philip A. (1959). "The crystal structure of keatite, a new form of silica". Zeitschrift für Kristallographie 112: 409–13. DOI:10.1524/zkri.1959.112.1-6.409.
- ^ Miehe, Gerhard; Graetsch, Heribert (1992). "Crystal structure of moganite: a new structure type for silica". European Journal of Mineralogy 4: 693–706.
- ^ Levien L., Prewitt C.T. (1981). "High-pressure crystal structure and compressibility of coesite". American Mineralogist 66: 324–333. http://www.minsocam.org/ammin/AM66/AM66_324.pdf.
- ^ Smyth J.R., Swope R.J., Pawley A.R. (1995). "H in rutile-type compounds: II. Crystal chemistry of Al substitution in H-bearing stishovite". American Mineralogist 80: 454–456. http://rruff.geo.arizona.edu/doclib/am/vol80/AM80_454.pdf.
- ^ Weiss, Alarich; Weiss, Armin (1954). "Über Siliciumchalkogenide. VI. Zur Kenntnis der faserigen Siliciumdioxyd-Modifikation". Zeitschrift für anorganische und allgemeine Chemie 276: 95–112. DOI:10.1002/zaac.19542760110.
- ^ Dera P, Prewitt C T, Boctor N Z, Hemley R J (2002). "Characterization of a high-pressure phase of silica from the Martian meteorite Shergotty". American Mineralogist 87: 1018. http://rruff.geo.arizona.edu/AMS/authors/Boctor%20N%20Z.
- ^ Seifertite at Mindat
- ^ Elliott, S. R. (1991). "Medium-range structural order in covalent amorphous solids". Nature 354 (6353): 445. DOI:10.1038/354445a0.
- ^ a b Sunggyu Lee (2006). Encyclopedia of chemical processing. CRC Press. ISBN 0-8247-5563-4.
- ^ Robert Doering, Yoshio Nishi (2007). Handbook of Semiconductor Manufacturing Technology. CRC Press. ISBN 1-57444-675-4. http://books.google.com/?id=Qi98H-iTgLEC&printsec=frontcover.
- ^ A.B.D. Nandiyanto; S.-G Kim; F. Iskandar; and K. Okuyama (2009). "Synthesis of Silica Nanoparticles with Nanometer-Size Controllable Mesopores and Outer Diameters". Microporous and Mesoporous Materials 120 (3): 447–453. DOI:10.1016/j.micromeso.2008.12.019.
- ^ Fournier R.O., Rowe J.J. (1977). "The solubility of amorphous silica in water at high temperatures and high pressures". American Mineralogist 62: 1052–1056. http://www.minsocam.org/ammin/AM62/AM62_1052.pdf.
- ^ Shriver and Atkins. Inorganic Chemistry (5th Edition). W. H. Freeman and Company, New York, 2010, pp 354.
- ^ Silicon as an essential trace element in animal nutrition. Carlisle EM. Ciba Foundation Symposium 1986;121:123-39.
- ^ [http://www.degussa-nano.de/nano/MCMSbase/Pages/ProvideResource.aspx?respath=/NR/rdonlyres/1E02FAD4-E5D6-4CE2-8E5C-E19F4DAC7838/0/Toxicological_Overview_Amorphous_Silica_in_Working_Environment.pdf[dead link] "Toxicological Overview of Amorphous Silica in Working Environment"]. http://www.degussa-nano.de/nano/MCMSbase/Pages/ProvideResource.aspx?respath=/NR/rdonlyres/1E02FAD4-E5D6-4CE2-8E5C-E19F4DAC7838/0/Toxicological_Overview_Amorphous_Silica_in_Working_Environment.pdf[dead link].
- ^ Reuzel, PG; Bruijntjes, JP; Feron, VJ; Woutersen, RA (1991). "Subchronic inhalation toxicity of amorphous silicas and quartz dust in rats". Food and chemical toxicology : an international journal published for the British Industrial Biological Research Association 29 (5): 341–54. DOI:10.1016/0278-6915(91)90205-L. PMID 1648030.
- ^ Massey, Fergus P.; Ennos, A. Roland; Hartley, SUE E. (2006). "Silica in grasses as a defence against insect herbivores: Contrasting effects on folivores and a phloem feeder". Journal of Animal Ecology 75 (2): 595–603. DOI:10.1111/j.1365-2656.2006.01082.x. PMID 16638012.
- ^ Keeping, Malcolm G.; Kvedaras, Olivia L. (2008). "Silicon as a plant defence against insect herbivory: Response to Massey, Ennos and Hartley". Journal of Animal Ecology 77 (3): 631–3. DOI:10.1111/j.1365-2656.2008.01380.x. PMID 18341561.
- ^ Rondeau, V.; Jacqmin-Gadda, H.; Commenges, D.; Helmer, C.; Dartigues, J.-F. (2008). "Aluminum and Silica in Drinking Water and the Risk of Alzheimer's Disease or Cognitive Decline: Findings from 15-Year Follow-up of the PAQUID Cohort". American Journal of Epidemiology 169 (4): 489–96. DOI:10.1093/aje/kwn348. PMC 2809081. PMID 19064650. //www.pubmedcentral.nih.gov/articlerender.fcgi?tool=pmcentrez&artid=2809081.
Media related to Silicon dioxide at Wikimedia Commons
![[SAO Silica Character Song] Rina Hidaka - Lovely Super Idol [English][KaraokeFX]](http://web.archive.org./web/20130918235333im_/http://i.ytimg.com/vi/uqVNikk5k6Q/default.jpg "[SAO Silica Character Song] Rina Hidaka - Lovely Super Idol [English][KaraokeFX]")
