aluminium ← silicon → phosphorus C ↑ Si ↓ Ge 14Si Periodic table
Appearance
crystalline, reflective with bluish-tinged faces Spectral lines of Silicon
General properties
Name, symbol, number	silicon, Si, 14
Pronunciation	/ˈsɪlɨkən/ SIL-ə-kən or /ˈsɪlɨkɒn/ SIL-ə-kon
Element category	metalloid
Group, period, block	14, 3, p
Standard atomic weight	28.0855(3)
Electron configuration	[Ne] 3s2 3p2
Electrons per shell	2, 8, 4 (Image)
Physical properties
Phase	solid
Density (near r.t.)	2.3290 g·cm−3
Liquid density at m.p.	2.57 g·cm−3
Melting point	1687 K, 1414 °C, 2577 °F
Boiling point	3538 K, 3265 °C, 5909 °F
Heat of fusion	50.21 kJ·mol−1
Heat of vaporization	359 kJ·mol−1
Molar heat capacity	19.789 J·mol−1·K−1
Vapor pressure
P (Pa) 1 10 100 1 k 10 k 100 k at T (K) 1908 2102 2339 2636 3021 3537
Atomic properties
Oxidation states	4, 3 , 2 , 1[1] -1, -2, -3, -4 (amphoteric oxide)
Electronegativity	1.90 (Pauling scale)
Ionization energies (more)	1st: 786.5 kJ·mol−1
	2nd: 1577.1 kJ·mol−1
	3rd: 3231.6 kJ·mol−1
Atomic radius	111 pm
Covalent radius	111 pm
Van der Waals radius	210 pm
Miscellanea
Crystal structure	diamond cubic
Magnetic ordering	diamagnetic[2]
Electrical resistivity	(20 °C) 103[3]Ω·m
Thermal conductivity	149 W·m−1·K−1
Thermal expansion	(25 °C) 2.6 µm·m−1·K−1
Speed of sound (thin rod)	(20 °C) 8433 m·s−1
Young's modulus	130-188[4] GPa
Shear modulus	51-80[4] GPa
Bulk modulus	97.6[4] GPa
Poisson ratio	0.064 - 0.28[4]
Mohs hardness	7
CAS registry number	7440-21-3
Band gap energy at 300 K	1.12 eV
Most stable isotopes
Main article: Isotopes of silicon
iso NA half-life DM DE (MeV) DP 28Si 92.23% 28Si is stable with 14 neutrons 29Si 4.67% 29Si is stable with 15 neutrons 30Si 3.1% 30Si is stable with 16 neutrons 32Si trace 170 y β− 13.020 32P
v t e · r

Silicon ( /ˈsɪlɨkən/ SIL-ə-kən or /ˈsɪlɨkɒn/ SIL-ə-kon) is a chemical element with the symbol Si and atomic number 14. A tetravalent metalloid, it is less reactive than its chemical analog carbon, the nonmetal directly above it in the periodic table, but more reactive than germanium, the metalloid directly below it in the table. Controversy about silicon's character dates to its discovery: silicon was first prepared and characterized in pure form in 1824, and given the name silicium (from Latin: silicis, flints), with an -ium word-ending to suggest a metal, a name which the element retains in several non-English languages. However, its final English name, suggested in 1831, reflects the more physically similar elements carbon and boron.

Silicon is the eighth most common element in the universe by mass, but very rarely occurs as the pure free element in nature. It is most widely distributed in dusts, sands, planetoids, and planets as various forms of silicon dioxide (silica) or silicates. Over 90% of the Earth's crust is composed of silicate minerals, making silicon the second most abundant element in the earth's crust (about 28% by mass) after oxygen.^[5]

Most silicon is used commercially without being separated, and indeed often with little processing of compounds from nature. These include direct industrial building-use of clays, silica sand and stone. Silica is used in ceramic brick. Silicate goes into Portland cement for mortar and stucco, and when combined with silica sand and gravel, to make concrete. Silicates are also in whiteware ceramics such as porcelain, and in traditional quartz-based soda-lime glass. More modern silicon compounds such as silicon carbide form abrasives and high-strength ceramics. Silicon is the basis of the ubiquitous synthetic silicon-based polymers called silicones.

Elemental silicon also has a large impact on the modern world economy. Although most free silicon is used in the steel refining, aluminum-casting, and fine chemical industries (often to make fumed silica), the relatively small portion of very highly purified silicon that is used in semiconductor electronics (< 10%) is perhaps even more critical. Because of wide use of silicon in integrated circuits, the basis of most computers, a great deal of modern technology depends on it.

Silicon is an essential element in biology, although only tiny traces of it appear to be required by animals,^[6] however various sea sponges need silicon in order to have structure. It is much more important to the metabolism of plants, particularly many grasses, and silicic acid (a type of silica) forms the basis of the striking array of protective shells of the microscopic diatoms.

Characteristics[link]

Physical[link]

Silicon crystallizes in a diamond cubic crystal structure

Silicon is a solid at room temperature, with relatively high melting and boiling points of approximately 1,400 and 2,800 degrees Celsius respectively.^[7] Interestingly, silicon has a greater density in a liquid state than a solid state. Therefore, it does not contract when it freezes like most substances, but expands, similar to how ice is less dense than water and has less mass per unit of volume than liquid water. With a relatively high thermal conductivity of 149 W·m⁻¹·K⁻¹, silicon conducts heat well and as a result is not often used to insulate hot objects.

In its crystalline form, pure silicon has a gray color and a metallic luster. Like germanium, silicon is rather strong, very brittle, and prone to chipping. Silicon, like carbon and germanium, crystallizes in a diamond cubic crystal structure, with a lattice spacing of approximately 0.5430710 nm (5.430710 Å).^[8]

The outer electron orbital of silicon, like that of carbon, has four valence electrons. The 1s,2s,2p and 3s subshells are completely filled while the 3p subshell contains two electrons out of a possible six.

Silicon is a semiconductor. It has a negative temperature coefficient of resistance, since the number of free charge carriers increases with temperature. The electrical resistance of single crystal silicon significantly changes under the application of mechanical stress due to the piezoresistive effect.^[9]

Chemical[link]

Silicon powder

Silicon is a metalloid, readily either donating or sharing its four outer electrons, allowing for many forms of chemical bonding. Even though it is relatively inert like carbon, silicon still reacts with halogens and dilute alkalis, but most acids (except for some hyper-reactive combinations of nitric acid and hydrofluoric acid) have no known effect on it. However, having four bonding electrons gives it, like carbon, many opportunities to combine with other elements or compounds under the right circumstances.

Isotopes[link]

Naturally occurring silicon is composed of three stable isotopes, silicon-28, silicon-29, and silicon-30, with silicon-28 being the most abundant (92% natural abundance).^[10] Out of these, only silicon-29 is of use in NMR and EPR spectroscopy.^[11] Twenty radioisotopes have been characterized, with the most stable being silicon-32 with a half-life of 170 years, and silicon-31 with a half-life of 157.3 minutes.^[10] All of the remaining radioactive isotopes have half-lives that are less than seven seconds, and the majority of these have half-lives that are less than one tenth of a second.^[10] Silicon does not have any known nuclear isomers.^[10]

The isotopes of silicon range in mass number from 22 to 44.^[10] The most common decay mode of six isotopes with mass numbers lower than the most abundant stable isotope, silicon-28, is β+
, primarily forming aluminium isotopes (13 protons) as decay products.^[10] The most common decay mode(s) for 16 isotopes with mass numbers higher than silicon-28 is β−
, primarily forming phosphorus isotopes (15 protons) as decay products.^[10]

Occurrence[link]

Quartz crystal cluster from Tibet. The naturally-occurring mineral is a network solid with the formula SiO₂.

Measured by mass, silicon makes up 27.7% of the Earth's crust and is the second most abundant element in the crust, with only oxygen having a greater abundance.^[12] Silicon is usually found in the form of complex silicate minerals, and less often as silicon dioxide (silica, a major component of common sand). Pure silicon crystals are very rarely found in nature.

The silicate minerals—various minerals containing silicon, oxygen and reactive metals—account for 90% of the mass of the Earth's crust. This is due to the fact that at the high temperatures characteristic of the formation of the inner solar system, silicon and oxygen have a great affinity for each other, forming networks of silicon and oxygen in chemical compounds of very low volatility. Since oxygen and silicon were the most common non-gaseous and non-metallic elements in the debris from supernova dust which formed the protoplanetary disk in the formation and evolution of the Solar System, they formed many complex silicates which accreted into larger rocky planetesimals that formed the terrestrial planets. Here, the reduced silicate mineral matrix entrapped the metals reactive enough to be oxidized (aluminum, calcium, sodium, potassium and magnesium). After loss of volatile gases, as well as carbon and sulfur via reaction with hydrogen, this silicate mixture of elements formed most of the Earth's crust. These silicates were of relatively low density with respect to iron, nickel, and other metals non-reactive to oxygen and thus a residuum of uncombined iron and nickel sank to the planet's core, leaving a thick mantle consisting mostly of magnesium and iron silicates above.

Examples of silicate minerals in the crust include those in the pyroxene, amphibole, mica, and feldspar groups. These minerals occur in clay and various types of rock such as granite and sandstone.

Silica occurs in minerals consisting of very pure silicon dioxide in different crystalline forms, quartz, agate amethyst, rock crystal, chalcedony, flint, jasper, and opal. The crystals have the empirical formula of silicon dioxide, but do not consist of separate silicon dioxide molecules in the manner of solid carbon dioxide. Rather, silica is structurally a network-solid consisting of silicon and oxygen in three-dimensional crystals, like diamond. Less pure silica forms the natural glass obsidian. Biogenic silica occurs in the structure of diatoms, radiolaria and siliceous sponges.

Silicon is also a principal component of many meteorites, and is a component of tektites, a silicate mineral of possibly lunar origin, or (if Earth-derived) which has been subjected to unusual temperatures and pressures, possibly from meteorite strike.

Production[link]

Alloys[link]

Ferrosilicon alloy

Ferrosilicon, an iron-silicon alloy that contains varying ratios of elemental silicon and iron, accounts for about 80% of the world's production of elemental silicon, with China, the leading supplier of elemental silicon, providing 4.6 million tonnes (or 2/3 of the world output) of silicon, most of which is in the form of ferrosilicon. It is followed by Russia (610,000 t), Norway (330,000 t), Brazil (240,000 t) and the United States (170,000 t).^[13] Ferrosilicon is primarily used by the steel industry (see below).

Aluminum-silicon alloys are heavily used in the aluminum alloy casting industry, where silicon is the single most important additive to aluminum to improve its casting properties. Since cast aluminum is widely used in the automobile industry, this use of silicon is thus the single largest industrial use of "metallurgical grade" pure silicon (as this purified silicon is added to pure aluminum, whereas ferrosilicon is never purified before being added to steel).^[14]

Metallurgical grade[link]

Elemental silicon not alloyed with significant quantities of other elements, and usually > 95% is often referred to loosely as silicon metal. It makes up about 20% of the world total elemental silicon production, with less than 1 to 2% of total elemental silicon (5–10% of metallurgical grade silicon) ever purified to higher grades for use in electronics. Metallurgical grade silicon is commercially prepared by the reaction of high-purity silica with wood, charcoal, and coal in an electric arc furnace using carbon electrodes. At temperatures over 1,900 °C (3,450 °F), the carbon in the aforementioned materials and the silicon undergo the chemical reaction SiO₂ + 2 C → Si + 2 CO. Liquid silicon collects in the bottom of the furnace, which is then drained and cooled. The silicon produced via this process is called metallurgical grade silicon and is at least 98% pure. Using this method, silicon carbide (SiC) may also form from an excess of carbon in one or both of the following ways: SiO₂ + C → SiO + CO or SiO + 2 C → SiC + CO. However, provided the concentration of SiO₂ is kept high, the silicon carbide can be eliminated by the chemical reaction 2 SiC + SiO₂ → 3 Si + 2 CO.

As noted above, metallurgical grade silicon "metal" has its primary use in the aluminum casting industry to make aluminum-silicon alloy parts. The remainder (about 45%) is used by the chemical industry, where it is primarily employed to make fumed silica.^[15]

As of September 2008, metallurgical grade silicon costs about US$1.45 per pound ($3.20/kg),^[16] up from $0.77 per pound ($1.70/kg) in 2005.^[17]

[edit] Electronic grade

Monocrystalline silicon ingot grown by the Czochralski process

The use of silicon in semiconductor devices demands a much greater purity than afforded by metallurgical grade silicon. Very pure silicon (>99.9%) can be extracted directly from solid silica or other silicon compounds by molten salt electrolysis.^[18][19] This method, known as early as 1854^[20] (see also FFC Cambridge process), has the potential to directly produce solar-grade silicon without any carbon dioxide emission at much lower energy consumption.

Solar grade silicon cannot be used for semiconductors, where purity must be extreme to properly control the process. Bulk silicon wafers used at the beginning of the integrated circuit making process must first be refined to "nine nines" purity (99.9999999%), a process which requires repeated applications of refining technology.

The majority of silicon crystals grown for device production are produced by the Czochralski process, (CZ-Si) since it is the cheapest method available and it is capable of producing large size crystals. However, single crystals grown by the Czochralski process contain impurities because the crucible containing the melt often dissolves. Historically, a number of methods have been used to produce ultra-high-purity silicon.

Early silicon purification techniques were based on the fact that if silicon is melted and re-solidified, the last parts of the mass to solidify contain most of the impurities. The earliest method of silicon purification, first described in 1919 and used on a limited basis to make radar components during World War II, involved crushing metallurgical grade silicon and then partially dissolving the silicon powder in an acid. When crushed, the silicon cracked so that the weaker impurity-rich regions were on the outside of the resulting grains of silicon. As a result, the impurity-rich silicon was the first to be dissolved when treated with acid, leaving behind a more pure product.

In zone melting, also called zone refining, the first silicon purification method to be widely used industrially, rods of metallurgical grade silicon are heated to melt at one end. Then, the heater is slowly moved down the length of the rod, keeping a small length of the rod molten as the silicon cools and re-solidifies behind it. Since most impurities tend to remain in the molten region rather than re-solidify, when the process is complete, most of the impurities in the rod will have been moved into the end that was the last to be melted. This end is then cut off and discarded, and the process repeated if a still higher purity is desired.^[21]

A polycrystalline silicon rod made by the Siemens process

At one time, DuPont produced ultra-pure silicon by reacting silicon tetrachloride with high-purity zinc vapors at 950 °C, producing silicon by SiCl₄ + 2 Zn → Si + 2 ZnCl₂. However, this technique was plagued with practical problems (such as the zinc chloride byproduct solidifying and clogging lines) and was eventually abandoned in favor of the Siemens process. In the Siemens process, high-purity silicon rods are exposed to trichlorosilane at 1150 °C. The trichlorosilane gas decomposes and deposits additional silicon onto the rods, enlarging them because 2 HSiCl₃ → Si + 2 HCl + SiCl₄. Silicon produced from this and similar processes is called polycrystalline silicon. Polycrystalline silicon typically has impurity levels of less than one part per billion.^[22][23][24]

In 2006 REC announced construction of a plant based on fluidized bed (FB) technology using silane: 3 SiCl₄ + Si + 2 H₂ → 4 HSiCl₃, 4 HSiCl₃ → 3 SiCl₄ + SiH₄, SiH₄ → Si + 2 H₂.^[25] The advantage of fluid bed technology is that processes can be run continuously, yielding higher yields than Siemens Process, which is a batch process.

Today, silicon is purified by converting it to a silicon compound that can be more easily purified by distillation than in its original state, and then converting that silicon compound back into pure silicon. Trichlorosilane is the silicon compound most commonly used as the intermediate, although silicon tetrachloride and silane are also used. When these gases are blown over silicon at high temperature, they decompose to high-purity silicon.

In addition, there is the Schumacher process, which utilizes tribromosilane in place of trichlorosilane and fluid bed technology. It requires lower deposition temperatures, lower capital costs to build facilities and operate, no hazardous polymers nor explosive material, and produces no amorphous silicon dust waste, all of which are drawbacks of the Siemens process.^[26] However, there are yet to be any major factories built using this process.

Compounds[link]

PDMS – a silicone compound

• Silicon forms binary compounds called silicides with many metallic elements whose properties range from reactive compounds, e.g. magnesium silicide, Mg₂Si through high melting refractory compounds such as molybdenum disilicide, MoSi₂.^[27]
• Silicon carbide, SiC (carborundum) is a hard, high melting solid and a well known abrasive. It may also be sintered into a type of high-strength ceramic used in armor.
• Silane, SiH₄, is a pyrophoric gas with a similar tetrahedral structure to methane, CH₄. When pure, it does not react with pure water or dilute acids; however, even small amounts of alkali impurities from the laboratory glass can result in a rapid hydrolysis.^[28] There is a range of catenated silicon hydrides that form a homologous series of compounds, Si_nH_2n+2 where n = 2–8 (analogous to the alkanes). These are all readily hydrolyzed and are thermally unstable, particularly the heavier members.^[29][30]
• Disilenes contain a silicon-silicon double bond (analogous to the alkenes) and are generally highly reactive requiring large substituent groups to stabilize them.^[31] A disilyne with a silicon-silicon triple bond was first isolated in 2004; although as the compound is non-linear, the bonding is dissimilar to that in alkynes.^[32]
• Tetrahalides, SiX₄, are formed with all the halogens.^[33] Silicon tetrachloride, for example, reacts with water, unlike its carbon analogue, carbon tetrachloride.^[34] Silicon dihalides are formed by the high temperature reaction of tetrahalides and silicon; with a structure analogous to a carbene they are reactive compounds. Silicon difluoride condenses to form a polymeric compound, (SiF₂)_n.^[30]
• Silicon dioxide is a high melting solid with a number of crystal forms; the most familiar of which is the mineral quartz. In quartz each silicon atom is surrounded by four oxygen atoms that bridge to other silicon atoms to form a three dimensional lattice.^[34] Silica is soluble in water at high temperatures forming a range of compounds called monosilicic acid, Si(OH)₄.^[35]
• Under the right conditions monosilicic acid readily polymerizes to form more complex silicic acids, ranging from the simplest condensate, disilicic acid (H₆Si₂O₇) to linear, ribbon, layer and lattice structures which form the basis of the many silicate minerals and are called polysilicic acids {Si_x(OH)_4–2x}_n.^[35]
• With oxides of other elements the high temperature reaction of silicon dioxide can give a wide range of glasses with various properties.^[36] Examples include soda lime glass, borosilicate glass and lead crystal glass.
• Silicon sulfide, SiS₂ is a polymeric solid (unlike its carbon analogue the liquid CS₂).^[37]
• Silicon forms a nitride, Si₃N₄ which is a ceramic.^[38] Silatranes, a group of tricyclic compounds containing five-coordinate silicon, may have physiological properties.^[39]
• Many transition metal complexes containing a metal-silicon bond are now known, which include complexes containing SiH_nX_3−n ligands, SiX₃ ligands, and Si(OR)₃ ligands.^[39]
• Silicones are large group of polymeric compounds with an (Si-O-Si) backbone. An example is the silicone oil PDMS (polydimethylsiloxane). These polymers can be crosslinked to produce resins and elastomers.^[40]
• Many organosilicon compounds are known which contain a silicon-carbon single bond. Many of these are based on a central tetrahedral silicon atom, and some are optically active when central chirality exists. Long chain polymers containing a silicon backbone are known, such as polydimethysilylene (SiMe₂)_n.^[41] Polycarbosilane, [(SiMe₂)₂CH₂]_n with a backbone containing a repeating -Si-Si-C unit, is a precursor in the production of silicon carbide fibers.^[41]

History[link]

Attention was first drawn to quartz as the possible oxide of a fundamental chemical element by Antoine Lavoisier, in 1787. In 1811, Gay-Lussac and Thénard are thought to have prepared impure amorphous silicon, through the heating of recently isolated potassium metal with silicon tetrafluoride, but they did not purify and characterize the product, nor identify it as a new element. In 1824, Berzelius prepared amorphous silicon using approximately the same method as Gay-Lussac (potassium metal and potassium fluorosilicate), but purifying the product to a brown powder by repeatedly washing it. He named the product silicium from the Latin silex, silicis for flint, flints, and adding the "-ium" ending because he believed it was a metal. As a result he is usually given credit for element's discovery.^[42][43] Silicon was given its present name in 1831 by Scottish chemist Thomas Thomson. He retained part of Berzelius's name but added "-on" because he believed silicon a nonmetal more similar to boron and carbon.

Silicon in its more common crystalline form was not prepared until 31 years later, by Deville.^[44] By electrolyzing impure sodium-aluminum chloride containing approximately 10% silicon, he was able to obtain a slightly impure allotrope of silicon in 1854.^[45] Later, more cost-effective methods have been developed to isolate silicon in several allotrope forms, the most recent being silicene.

Because silicon is an important element in semiconductors and high-technology devices, many places in the world bear its name. For example, Silicon Valley in California, since it is the base for a number of technology-related industries, bears the name silicon. Other geographic locations with connections to the industry have since been named after silicon as well. Examples include Silicon Forest in Oregon, Silicon Hills in Austin, Texas, Silicon Saxony in Germany, Silicon Valley in India, Silicon Border in Mexicali, Mexico, Silicon Fen in Cambridge, England, and Silicon Gorge in Bristol, England.

Applications[link]

Compounds[link]

Most silicon is used industrially without being separated into the element, and indeed often with comparatively little processing from natural occurrence. Over 90% of the Earth's crust is composed of silicate minerals. Many of these have direct commercial uses, such as clays, silica sand and most kinds of building stone. Thus, the vast majority of uses for silicon are as structural compounds, either as the silicate minerals or silica (crude silicon dioxide). For example, silica is an important part of ceramic brick. Silicates are used in making Portland cement which is used in building mortar and stucco, but more importantly combined with silica sand, and gravel (usually containing silicate minerals like granite), to make the concrete that is the basis of most of the very largest industrial building projects of the modern world. ^[46]

Silicate minerals are also in whiteware ceramics, an important class of products usually containing various types of fired clay (natural aluminum silicate). An example is porcelain which is based on silicate mineral kaolinite. Ceramics include art objects, and domestic, industrial and building products. Traditional quartz-based soda-lime glass also functions in many of the same roles.

More modern silicon compounds also function as high-technology abrasives and new high-strength ceramics based upon (silicon carbide), and in superalloys.

Alternating silicon-oxygen chains with hydrogen attached to the remaining silicon bonds form the ubiquitous silicon-based polymeric materials known as silicones. These compounds containing silicon-oxygen and occasionally silicon-carbon bonds have the capability to act as bonding intermediates between glass and organic compounds, and to form polymers with useful properties such as impermeability to water, flexibility and resistance to chemical attack. Silicones are often used in waterproofing treatments, molding compounds, mold-release agents, mechanical seals, high temperature greases and waxes, and caulking compounds. Silicone is also sometimes used in breast implants, contact lenses, explosives and pyrotechnics.^[47] Silly Putty was originally made by adding boric acid to silicone oil.^[48]

Alloys[link]

Elemental silicon is added to molten cast iron as ferrosilicon or silicocalcium alloys to improve performance in casting thin sections, and to prevent the formation of cementite where exposed to outside air. The presence of elemental silicon in molten iron acts as a sink for oxygen, so that the steel carbon content, which must be kept within narrow limits for each type of steel, can be more closely controlled. Ferrosilicon production and use is a monitor of the steel industry, and although this form of elemental silicon is impure, it accounts for 80% of the world's use of free silicon.

The properties of silicon itself can be used to modify alloys. Silicon's importance in aluminum casting is that a significantly high amount (12%) of silicon in aluminum forms a eutectic mixture which solidifies with very little thermal contraction. This greatly reduces tearing and cracks formed from stress as casting alloys cool to solidity. Silicon also significantly improves the hardness and thus wear-resistance of aluminum.^[14] Silicon is an important constituent of electrical steel, modifying its resistivity and ferromagnetic properties.

Metallurgical grade silicon is silicon of 95–99% purity. About 55% of the world consumption of metallurgical purity silicon goes for production of aluminum-silicon alloys for aluminum part casts, mainly for use in the automotive industry. The reason for the high silicon use in these alloys is noted above.^[15] Much of the rest of metallurgical-grade silicon is used by the chemical industry for production of the important industrial product fumed silica. The remainder is used in production of other fine chemicals such as silanes and some types of silicones.

Electronics[link]

Silicon wafer with mirror finish

Since most elemental silicon produced remains as ferrosilicon alloy, only a relatively small amount (20%) of the elemental silicon produced is refined to metallurgical grade purity (a total of 1.3–1.5 million metric tons/year). The fraction of silicon metal which is further refined to semiconductor purity is estimated at only 15% of the world production of metallurgical grade silicon.^[15] However, the economic importance of this small very high-purity fraction (especially the ~ 5% which is processed to monocrystalline silicon for use in integrated circuits) is disproportionately large.

Pure monocrystalline silicon is used to produce silicon wafers used in the semiconductor industry, in electronics and in some high-cost and high-efficiency photovoltaic applications. In terms of charge conduction, pure silicon is an intrinsic semiconductor which means that unlike metals it conducts electron holes and electrons which may be released from atoms within the crystal by heat, and thus increase silicon's electrical conductance with higher temperatures. Pure silicon has too low a conductance to be used as a circuit element in electronics without being doped with small concentrations of certain other elements. This process greatly increases its conductivity and adjusts its electrical response by controlling the number and charge (positive or negative) of activated carriers. Such control is necessary for transistors, solar cells, semiconductor detectors and other semiconductor devices, which are used in the computer industry and other technical applications. For example, in silicon photonics, silicon can be used as a continuous wave Raman laser medium to produce coherent light, though it is ineffective as an everyday light source.

In common integrated circuits, a wafer of monocrystalline silicon serves as a mechanical support for the circuits, which are created by doping, and insulated from each other by thin layers of silicon oxide, an insulator which is easily produced by exposing the element to oxygen under the proper conditions. Silicon has become the most popular material to build both high power semiconductors and integrated circuits, because of all the elements, silicon is the semiconductor which can withstand the highest powers and temperatures without becoming dysfunctional due to avalanche breakdown, a process in which an electron avalanche is created by a chain reaction process where heat produces free electrons and holes, which in turn produce more current which produces more heat. In addition, the insulating oxide of silicon is not soluble in water, which gives it an advantage over germanium (an element with similar properties which can also be used in semiconductor devices) in certain type of fabrication techniques.^[49]

Monocrystalline silicon is expensive to produce, and is usually only justified in production of integrated circuits, where tiny crystal imperfections can interfere with tiny circuit paths. For other uses, other types of pure silicon which do not exist as single crystals may be employed. These include hydrogenated amorphous silicon and upgraded metallurgical-grade silicon (UMG-Si) which are used in the production of low-cost, large-area electronics in applications such as liquid crystal displays, and of large-area, low-cost, thin-film solar cells. Such semiconductor grades of silicon which are either slightly less pure than those used in integrated circuits, or which are produced in polycrystalline rather than monocrystalline form, make up roughly similar amount of silicon as are produced for the monocrystalline silicon semiconductor industry, or 75,000 to 150,000 metric tons per year. However, production of such materials is growing more quickly than silicon for the integrated circuit market. By 2013 polycrystalline silicon production, used mostly in solar cells, is projected to reach 200,000 metric tons per year, while monocrystalline semiconductor silicon production (used in computer microchips) remains below 50,000 tons/year.^[15]

Biological role[link]

Silica skeletons of radiolaria in false color.

Although silicon is readily available in the form of silicates, very few organisms have a use for it. Diatoms, radiolaria and siliceous sponges use biogenic silica as a structural material to construct skeletons. In more advanced plants, the silica phytoliths (opal phytoliths) are rigid microscopic bodies occurring in the cell; some plants, for example rice, need silicon for their growth.^[50][51][52] Although silicon was proposed to be an ultra trace nutrient, its exact function in the biology of animals is still under discussion. Higher organisms are only known to use it in very limited occasions in the form of silicic acid and soluble silicates.

Silicon is currently under consideration for elevation to the status of a "plant beneficial substance by the Association of American Plant Food Control Officials (AAPFCO)."^[53][54] Silicon has been shown in university and field studies to improve plant cell wall strength and structural integrity,^[55] improve drought and frost resistance, decrease lodging potential and boost the plant's natural pest and disease fighting systems.^[56] Silicon has also been shown to improve plant vigor and physiology by improving root mass and density, and increasing above ground plant biomass and crop yields.^[55]

Hypothetical silicon-based lifeforms are the subject of silicon biochemistry, by analogy with carbon-based lifeforms. Silicon, being below carbon in the periodic table, is thought to have similar enough properties that would make silicon-based life possible, but much different from life as we know it.

See also[link]

Books View or order collections of articles	Silicon Period 3 elements Carbon group Chemical elements (sorted alphabetically) Chemical elements (sorted by number)
Portals Access related topics	Chemistry portal
Find out more on Wikipedia's Sister projects	Images and media from Commons Definitions from Wiktionary Textbooks from Wikibooks Learning resources from Wikiversity

References[link]

Bibliography[link]

• Greenwood, Norman N; Earnshaw, Alan (1997). Chemistry of the Elements (2 ed.). Oxford: Butterworth-Heinemann. ISBN 0-08-037941-9. 

External links[link]

• Mineral.Galleries.com – Silicon
• WebElements.com – Silicon

vep:Ola