Shasta Dam
Shasta Dam in April 2009
Location of Shasta Dam
Country	United States
Location	Shasta County, California
Coordinates	40°43′07″N 122°25′08″W / 40.71861°N 122.41889°W / 40.71861; -122.41889Coordinates: 40°43′07″N 122°25′08″W / 40.71861°N 122.41889°W / 40.71861; -122.41889[1]
Status	In use
Construction began	1938
Opening date	1945
Owner(s)	U.S. Bureau of Reclamation
Dam and spillways
Type of dam	Concrete thick gravity-arch
Height	602 ft (183 m)
Length	3,460 ft (1,050 m)
Crest width	30 ft (9.1 m)
Base width	543 ft (166 m)
Volume	6,270,000 cu yd (4,790,000 m3)
Impounds	Sacramento River
Spillways	1
Type of spillway	River outlets+triple drum gates
Spillway capacity	267,800 cu ft/s (7,580 m3/s)
Reservoir
Creates	Shasta Lake
Capacity	4,552,000 acre·ft (5.615×109 m3)
Catchment area	6,665 sq mi (17,260 km2)
Surface area	29,740 acres (12,040 ha)
Max. water depth	522.5 ft (159.3 m)
Power station
Type	Conventional
Hydraulic head	330 ft (100 m)
Turbines	2x 125MW, 3x 142MW
Installed capacity	676 MW
Maximum capacity	1,976 MW (proposed)
Annual generation	1.8 billion KWh

Shasta Dam (called Kennett Dam before its construction) is an arch dam across the Sacramento River in the northern part of the U.S. state of California, at the north end of the Sacramento Valley. The dam mainly serves long-term water storage and flood control in its reservoir, Shasta Lake, and also generates hydroelectric power. At 602 feet (183 m) high, it is the ninth-tallest dam in the United States and forms the largest reservoir in California.

Envisioned as early as 1919 because of frequent floods and droughts troubling California's largest agricultural region, the Central Valley, the dam was first authorized in the 1930s as a state undertaking. However, this coincided with the Great Depression and building of the dam was transferred to the federal Bureau of Reclamation as a public works project. Construction started in earnest in 1937 under the supervision of Chief Engineer Frank Crowe. During its building, the dam provided thousands of much-needed jobs; it was finished twenty-six months ahead of schedule in 1945. When completed, the dam was the second-tallest in the United States after Hoover, and was considered one of the greatest engineering feats of all time.

Even before its dedication, Shasta Dam served an important role in World War II providing electricity to California factories, and still plays a vital part in the management of state water resources today. However, it has brought about major changes to the environment and ecology of the Sacramento River, and met with controversy over its significant destruction of Native American tribal lands. In recent years, there has been debate over whether or not to raise the dam in order to allow for increased water storage and hydropower generation.

Context[link]

Early proposals[link]

The Pit River Valley, now under Shasta Lake, in 1941. The bridge visible near the bottom once carried U.S. Route 99 before it was replaced by the Pit River Bridge (from the deck of which this photo was taken).

In the 19th century, the Central Valley was the main destination for vast numbers of immigrants traveling into California from the eastern United States. The valley's land was coveted for its fertile soils, mild climate, rolling topography, and perhaps most importantly, the abundance of water.^[2] The state's largest river by discharge, the Sacramento River, flows through the northern third of the valley, known as the Sacramento Valley. The river flows south for a distance of 445 miles (716 km) before emptying into a vast estuary, the Sacramento-San Joaquin Delta, which outlets into Suisun Bay, the Carquinez Strait, San Francisco Bay and finally the Pacific Ocean. By the late 1800s, both the valley and Delta regions were intensely cultivated with various crops including wheat, cotton, rice, citrus and melons.^[3]

The region's agricultural focus makes it especially vulnerable to droughts, and the low topography causes flooding dangers. Although the Sacramento River discharges nearly 22.4 million acre-feet (27.6 km³) of water each year,^[4] most of the flow occurs during the winter and early spring with snowmelt and rainstorms, and can diminish to a trickle during the late summers and autumns of drought years.^[5] With increased irrigation in the valley, low flows dropped even lower, causing the outflow of the river to be unable to match the pace of high tides coming in from San Francisco Bay. Resultantly the salinity of the water in the Delta region started to rise, causing problems for farms on the Delta's many islands and allowed teredo, a saltwater worm, to thrive destroying piers and ships in Suisun Bay during a drought from 1919 to 1924.^[6]

In desperation to solve the salinity problem, area residents first proposed constructing a tidal barrage across the mouth of Suisun Bay, but the Marshall Plan, put forwards in 1919 by Robert Marshall of the United States Geological Survey, had a different solution.^[7] The plan's main component was the building of a large dam across the Sacramento just downstream of its confluence with the Pit River near the copper mining town of Kennett, several hundred miles above the Sacramento's mouth. Instead of blocking saltwater intrusion into the Delta directly, this dam would store winter floodwaters for use during the dry months, providing a stable, regulated flow with the added benefit of helping irrigation and providing flood control in the Sacramento Valley.^[8][9]

State Water Plan and the CVP[link]

With a price tag of roughly $800 million, the Marshall Plan was not widely received; when submitted to the U.S. Congress in 1921, it passed in the Senate but failed in the House of Representatives. However, the problems of the Californians did not go unheard afterwards – in 1931, State Engineer Edward Hyatt suggested a similar but slightly less pricey proposal called the State Water Plan, with a projected cost of about $550 million.^[10] Including the dam at Kennett and an aqueduct from the Delta southwards into the arid San Joaquin Valley and coastal Southern California, Hyatt's scheme laid the foundations for both the present day Central Valley Project (CVP) and the California State Water Project (SWP).^[11]

The old mining town of Kennett, being inundated by the rising waters of Shasta Lake circa 1944

The State Water Plan's cost was originally to fall on the shoulders of California taxpayers, who were the ones who needed the water. Unfortunately, this coincided with the Great Depression of the 1930s and the state was unable to raise the money needed to construct the dams and canals needed for the project.^[12] Soon the unemployment rate in California hovered around 20%, and a severe drought hit the West Coast. Now with its potential to provide jobs and control the much-needed water, Central and Northern Californians were desperate to get the CVP approved by the legislature. The project ended up getting approved by a slim margin – Southern Californians generally opposed the project because they had already secured water rights from the Colorado River, not the Sacramento, and wanted to strengthen those rights.^[13] In 1933, California's legislature authorized the selling of revenue bonds to fund the CVP, whose main component was to be Shasta Dam.^[2][6]

Unable to acquire funds, California's government turned to Washington D.C. for assistance, hoping that the federal government would provide financial assistance or purchase the bonds. Eventually, California ended up pleading for the government to take over the project. President Franklin Delano Roosevelt approved, as the construction works at Shasta Dam and other portions of the project would provide thousands of much-needed jobs.^[14] Roosevelt first considered the U.S. Army Corps of Engineers to build the project, but instead transferred it to the Bureau of Reclamation (back then the Reclamation Service) which had expertise building large dams as demonstrated at the Hoover Dam (Boulder Canyon Project) several years earlier.^[15] Reclamation chose Frank Crowe, the superintendent of the Hoover Dam, to direct operations at the Shasta Dam.^[14][16]

Construction[link]

Preparations and camps[link]

The Pit River Bridge, which was built to carry Interstate 5 and the Southern Pacific Railroad over Shasta Lake

The Pacific Constructors camp, photographed in November 1940. The H-shaped building to the left is the mess hall, which could seat up to 2,000.

The groundbreaking and official naming ceremony of Shasta Dam occurred on September 12, 1937 in the small town of Kennett shortly upstream of the dam, which would be flooded under the rising waters of the lake fewer than five years later. Although the dam was originally going to be called Kennett Dam, the name was changed to Shasta. Congress approved $12 million for the project.^[17] The final site for the dam was chosen at a steep, narrow canyon of the Sacramento River nearly 1,000 feet (300 m) deep about a mile above the abandoned smelter town of Coram and two-and-a-half miles below Kennett. The dam was planned to be over 800 feet (240 m) high.^[18] The winning bid of $35,939,450 for construction came from Pacific Constructors Inc., a conglomerate of twelve smaller companies.^[19]

Construction started with the excavation of millions of tons of bedrock from the canyon walls adjacent to the construction site to provide keyways to lay the dam's foundations.^[14] The Shasta Route of the Southern Pacific Railroad, which ran through the site, was rerouted to the east over the steel truss Pit River Bridge, then the tallest double-deck bridge ever built. The bridge was built to a height of more than 500 feet (150 m) above the Pit River, some 7 miles (11 km) east-northeast of the damsite, to accommodate the rising waters of Shasta Lake.^[20] The remaining portion of the railroad from Redding to the Shasta site was used as a branch line for construction trains traveling to and from the site, and routed through a tunnel beneath the south abutment of the dam.^[21]

Reclamation originally considered the city of Redding as a good location to set up the headquarters, but due to its distance from the dam site a new planned community called Toyon was constructed, built on a farm purchased from Porter Seaman in 1938. Toyon served purely to provide housing for Reclamation personnel, government offices and storage; no stores or restaurants were permitted within its boundaries. Instead of tents and shacks, the town was characterized by comfortable two, three and four-room wooden houses.^[22]

Pacific Constructors, the main company building Shasta Dam, set up its own camp near the base of the Shasta Dam site, called "Contractor's Camp" or "Shasta Dam Village". The company built an enormous 2,000-man mess hall, hospital, recreational center and other venues at the damsite. Three other makeshift camps nearby, called "Central Valley", "Project City" and "Summit City", soon filled with men from all over the state hoping to get jobs at the Shasta Dam – as drillers, crane operators, mechanics, truck drivers, carpenters, welders, among others.^[23][24]

Foundations[link]

The Shasta Dam conveyor belt – the longest in the world

In November 1938, construction started on a diversion channel that would shunt water to the east (left) side of the river so the foundations could be laid on the west side. The left bank of the river was widened and deepened using explosives, and a cofferdam built to dry up the bypassed section.^[25] To supply sand and gravel to make concrete at the construction site, Pacific Constructors built the largest conveyor belt system in the world,^[14] at 9.5-mile (15.3 km) that reached from Redding to the damsite. This was capable of transporting 1,100 tons of material per hour, and over the entire construction process, hauled more than 12 million tons of rock.^[26] The belt, which had some 16,000 rollers, was divided into 26 sections, 23 of which were powered by individual 200-hp motors. The remaining three were downhill and did not require power; in fact they were retrofitted to generate power for some of the other sections.^[27]

As the foundations were completed, concrete placement of the main dam body could begin. For this purpose, a system of steel cable towers was erected to carry the steel concrete pouring buckets. The tower setup comprised one main tower, standing 465 feet (142 m) high from its foundations and 700 feet (210 m) above the river, and seven movable auxiliary towers; cables were strung between the top of the main tower to each of the others.^[14] Using this system, construction crews were able to transport concrete from the mixing plant, which lay directly adjacent to the main tower at the end of the conveyor belt, to the rising structure of the dam faster and cheaper than any other method.^[28][29]

Concrete placement and river diversion[link]

The main 465-foot (142 m) tower used to support the cableway system at the dam site

Construction work in June 1942, showing the empty middle section which would later become the spillway.

Building of the dam's main concrete structure started in July 1940 after the cable systems had been completed and the mixing plant came on line. Steel buckets capable of carrying 8 cubic yards (6.1 m³) of concrete, weighing 16 tonnes when full, traveled back and forth along the lines. For three years, thousands of men labored building the dam's massive abutments, pouring concrete into large modular "blocks" 50 feet (15 m) square and 5 feet (1.5 m) deep. These blocks were shaped using wooden forms, which were removed when the concrete dried and rebuilt to handle the next block above it. The concrete was "vibrated" into place using specialized equipment, filling in any accidental cavities and bubbles to ensure maximum density and strength. After the concrete dried, the surface was cleaned and smoothed by sandblasting. At the same time, the railroad that ran through the temporary 1,800-foot (550 m) tunnel on the west side of the river was rerouted.^[14][30][31]

In December 1941, the Japanese attacked Pearl Harbor, prompting the United States to join into World War II. With thousands of men enlisting in the armed forces, the Shasta Dam site soon had a severe labor shortage. During the war years, many of the people who worked at the dam were women and high school students on mostly "non-hazardous jobs".^[32] The dam played an important part in World War II even before its completion, supplying much-needed electricity to shipyards and aircraft factories in central California.^[33] However, some generators originally intended for Shasta ended up in the Grand Coulee Dam in northern Washington because of the enormous demand of electricity from that dam to power aluminum smelters in the Northwest.^[34] The strained supplies and labor forced Reclamation to cut the final height of the dam from 800 feet (240 m) to 602 feet (183 m).^[18]

With the tunnel cleared, it was resurfaced and modified to accommodate the force of a river instead of a railroad. This was because up till this point, the Sacramento had still been flowing through the middle of the dam site, between the two nearly-completed abutments of the dam. An earth/rock filled cofferdam was constructed across the river, which now began to flow through the tunnel, drying out the dam site and enabling work to begin on the middle section of the dam, which contained the spillway bays. The spillways with their 18 high-pressure river outlet valves and massive triple drum gates were completed in the summer of 1943. By then, a total of 15 million tons of concrete had been used in the dam's construction, comprising the 16,900 50-foot blocks.^[14][35]

Completion[link]

March 6, 1943 view of the dam, showing work on the power station (left of the river

Water storage at the Shasta Dam began in February 1944 when the diversion tunnel was sealed. As the lake rose behind it, the dam was completed to its final shape and the last bucket of concrete was poured on January 2, 1945. During this time, the Shasta Dam powerplant, with a capacity of 379 MW, was also under construction. Five steel penstocks, each 15 feet (4.6 m) in diameter, were installed to provide water to drive the turbines in the power station. The powerhouse was a reinforced concrete structure standing 153 feet (47 m) above the river; electricity was first generated there in 1944.^[36] The dam was completed at the dawn of 1945.^[37]

When Shasta was completed, it was the second highest dam in the world – beaten only by Hoover Dam on the Colorado – as well as the highest man-made structure in California. It was also the second most massive dam measured by volume, exceeded only by Grand Coulee Dam on the Columbia River in Washington. So said an anonymous workman, "Old Shasta's about the secondest dam there is."^[38] When the dam was completed, chief engineer Frank Crowe is known to have said, "Look at that Shasta Dam. That dam will stand there forever holding back the river. And that powerhouse will keep right on turning out juice until somebody discovers how to make power out of sunlight."^[38] (Ironically, the invention of photovoltaics in the 1950s disproved Crowe's claim, although the Shasta Dam continues to produce as much electricity as ever.)

Design and operations[link]

Inside of the Shasta Dam powerhouse

Shasta Dam serves mainly to provide flood control and carryover water storage for the dry season, contributing greatly to irrigation in the Sacramento Valley and navigation on the Sacramento River, as well as keeping freshwater levels in the Sacramento-San Joaquin Delta high enough for diversion into the California Aqueduct and Delta-Mendota Canal. The dam's other major purpose is to generate hydroelectricity. With a hydraulic head of 330 feet (100 m), the dam is capable of generating 676 megawatts (MW) from five turbines – a pair of 125 MW units and three 142 MW units.^[39] Each of the turbines is driven by a high-pressure jet of water fed by a steel penstock 15 feet (4.6 m) in diameter. Two smaller turbines generate power for operations at the dam itself. The plant serves to generate peaking power for the northern Sacramento Valley.^[39] Keswick Dam, about 9 miles (14 km) downstream, serves as an afterbay for Shasta, regulating its fluctuating water releases.^[40]

A thick gravity-arch structure, the dam stands 602 feet (183 m) above the foundations with a maximum height of 522.5 feet (159.3 m) above the river. It is 3,460 feet (1,050 m) long, with a maximum thickness of 543 feet (166 m); altogether the dam contains 6,270,000 cubic yards (4,790,000 m³) of material.^[41] The dam can release floodwaters through a system of eighteen outlet valves on the face of the spillway. These valves are arranged in three levels, each cutting through the main dam structure and discharging onto the face of the spillway. The upper level has six outlets, each with a capacity of 6,534 cubic feet per second (185.0 m³/s). The middle layer has eight conduits capable of carrying 3,100 cubic feet per second (88 m³/s) and the lowest has four exits each able to discharge 4,450 cubic feet per second (126 m³/s) for a total of 81,800 cubic feet per second (2,320 m³/s).^[42] The spillway is a massive concrete chute, 487 feet (148 m) long and 375 feet (114 m) wide, controlled by three 110-foot (34 m)-wide drum gates each weighing 500 US tons (454 t). When the reservoir is full, the gates cannot entirely prevent leakage but can raise the water level up to 28 feet (8.5 m) above the spillway crest.^[40] The spillway has a capacity of 186,000 cubic feet per second (5,300 m³/s), bringing the dam's maximum overflow rate to 267,800 cubic feet per second (7,580 m³/s).^[43]

One of the many arms of Shasta Lake

The dam forms a reservoir called Shasta Lake, which is the largest man-made lake and third largest body of water in California with its capacity of 4,552,000 acre feet (5.615×10⁹ m³)^[43] and surface area of 29,740 acres (12,040 ha) at maximum pool. The lake extends for 15.3 miles (24.6 km) up the Sacramento River and branches for more than 21 miles (34 km) up the Pit River, which is actually the largest river flowing into the lake. Shasta Lake also has arms of the McCloud River, Squaw Creek, Salt Creek, and scores of other smaller streams that feed it.^[44] Shasta Dam controls runoff from a drainage basin of 6,665 square miles (17,260 km²),^[43] or about a quarter of the 27,580-square-mile (71,400 km²) Sacramento River watershed.^[45]

Future expansion[link]

Shasta Lake at maximum capacity in July 1965, after an extremely wet winter

In the 1990s, with skyrocketing water shortages in the Central Valley and some of California's largest agricultural coalitions including the Westlands Irrigation District calling for a more dependable water supply, the Bureau of Reclamation suggested the expansion of Shasta Dam.^[46] The expansion is considered feasible because the dam's foundations were originally built to carry the weight of a 800-foot (240 m) structure, but resources shortages at the onset of World War II prevented completing it to its final height.^[18]

Reclamation has suggested three options for the dam raise, ranging from less than 20 feet (6.1 m) to more than 200 feet (61 m).^[47] The "low option", which simply comprises adding a vertical concrete dike to the top of the dam, would provide maximum additional storage while minimizing requirements for reconstruction of buildings and facilities around Shasta Lake. The "intermediate option" would require adding more than 100 feet (30 m) to the crest and replacing the elevator towers on the front of the dam, and the Pit River Bridge and small towns around the lake, if not modified or moved, would be inundated. Finally, the "high option" would raise the dam over 200 feet (61 m), tripling the volume and doubling the surface area of the reservoir. Both the intermediate and high options would require saddle dams constructed at key points along the lake to keep it from overflowing.^[47]

The intermediate and high dam raises would allow for increased generation of hydropower. Each would require the construction of a new powerhouse to accommodate five new turbines; for the intermediate expansion, five 215-MW generators would be added for a total capacity of 1,751 MW, while for the high one, there would be five new 260-MW units for a maximum capacity of 1,976 MW. Downstream Keswick Dam would also be raised and its power station retrofitted to accommodate the greater peaking releases from Shasta.^[48]

The proposed dam raise has met with significant backlash from area inhabitants, fishermen, Native Americans, recreationalists and environmentalists. First of all, with any increase to the dam's height, significant reaches of the Pit, Sacramento, and McCloud Rivers would be inundated. The McCloud is an area of special interest because it is one of California's best trout fisheries and because many sacred Native American sites lie along its banks.^[49] Opponents of dam raise contend that it would cost more (starting with replacing over 600 structures that would be inundated under the lake including the Pit River Bridge) than its benefits. The water supplied from such a raise would be costly and could be saved if Central Valley farmers cut their water use by only a fraction. It would result in more problems for the ecology of the lower Sacramento, not least its dying salmon runs.^[50]

One of the most important points made by dam expansion opponents is that raising the dam will not create more water (in fact it will actually cause some water loss due to evaporation) but merely increases the capacity to store it. As a result, the reservoir will rarely be filled, as no matter how much Reclamation expands the dam, the river's flow will not increase. The cost of the dam raise is projected at $500 million-$1 billion. One of the expansion's most stoic opponents is the Winnemem Wintu tribe, almost all of whose land was inundated by the construction of Shasta Dam. Raising the dam would destroy much of their little remaining land.^[51][52]

Some progress has been made towards the dam expansion including for the completion of a costly EIR (Environment Impact Report) by the Bureau of Reclamation – and the purchase of over 3,000 acres (1,200 ha) of land along the McCloud River by Westlands Irrigation District to help the Bureau gain rights to expand the dam; Westlands believes that the added storage of the dam would greatly benefit its farmers. As of 2007, the irrigation district has spent $35 million.^[53] However, Westlands has had a spotty record with environmental responsibility and has been criticized by environmentalists for high levels of pesticide and selenium in the toxic runoff waters from farms operating under the district.^[54]

Controversy[link]

Ecological effects[link]

The TCD (Temperature Control Device) on the back of the dam, installed in the early 1990s

The Shasta Dam has had a severe negative effect on populations of Pacific salmon in the Sacramento River watershed ever since its gates were first closed in 1943. The massive structure completely prevents salmon migration from the lower reaches of the river to the Upper Sacramento, Pit, McCloud and other tributary streams. It is estimated that half of the best salmon habitat in the Sacramento basin lies upstream of Shasta Dam. Also, the dam caused temperatures in the river to rise because it released waters from higher elevations of Shasta Lake, which are warmed by the sun far more than the surface of the original river pre-dam. Warm waters are harmful to salmon, which prefer colder temperatures, and also impact other fish populations such as steelhead and wild California trout.^[55][56]

In an attempt to save the plunging salmon populations, the federal government constructed the Coleman National Fish Hatchery on Battle Creek in 1942. The hatchery is situated approximately 20 miles (32 km) southeast of Redding, and produces 13,850,000 eggs per year – nearly 87 percent of which are for the fall chinook salmon run.^[57] Another remedy was carried out by the Bureau of Reclamation in 1991, with the installation of a gigantic facility called a TCD (Temperature Control Device) on the rear face of Shasta Dam. This structure enables dam operators to decide the depth of the reservoir from which the water feeding into the penstocks originates. As one progresses deeper into Shasta Lake, the water gets colder where it receives less sunlight. The TCD is equipped with fifteen openings called "shutters" arranged in rows along the back face of the structure. The rows lie 1,022 feet (312 m), 922 feet (281 m), and 817 feet (249 m) above sea level. (The crest of Shasta Dam is at an elevation of 1,077 feet (328 m).) The system has shown significant success in reducing the temperature of the Sacramento River below the dam, although it does exhibit leakage.^[42]

As for the health of the river overall, the dam has of course indirectly affected it by promoting the growth of cities and farms along it. However, construction of the dam also has had direct consequences to the morphology and vegetation zones along the river. By raising summer flows much higher than their natural average, and moderating the effects of most floods, the post-dam river supplies an even amount of water to the riparian zone each year, and resultantly vegetation has encroached on the river channel.^[58] The dam has vastly reduced the amount of sediment in the Sacramento, and the riverbanks now suffer decreased erosion, slowing the growth of meanders and side-channels.^[59] Additionally, nearly all the rock and sand used in the mixing of concrete for the dam was dredged from the river downstream of the dam, further depleting its sediment supply.^[60]

Wintu lands[link]

Shasta Dam viewed from the air, with the reservoir nearly full

Underneath the waters of Shasta Lake lie buried the traditional lands of the Winnemem Wintu, one of nine groups of the larger Wintu ethnicity of northern California. It is estimated that the pre-colonization population of the valley was roughly 14,000; by 1900, due to diseases and settlers' encroachment it was reduced to 395. Of the men who survived out of the 395, many patriotically fought in the U.S. armed forces during World War II. Ironically and tragically, when they returned in 1945, they found their family members driven out of their traditional villages by the rising waters of Shasta Lake. More than 90 percent of their original land was lost, and the ten percent that remains now lies along the lower McCloud River.^[53][61]

Scores of village sites, burial sites and other sacred locations now sit several hundred feet below the surface of Shasta Lake. Tribal members argue that several reservation treaties originally set by the U.S. government in the 1850s were later broken so the filling of Shasta Lake could proceed; afterwards, only a tiny fraction of that land remained theirs. Furthermore, the Winnemem are not recognized by the federal government, an omission that they have been seeking to rectify for over a century.^[62] Recently, native hostility to the dam has heightened because of the proposals to raise it – which would drown twenty of the remaining sacred sites, including Children's Rock and Puberty Rock, both used in coming-of-age ceremonies, and a burial place for victims of the Kaibai Creek Massacre.^[63] The tribe conducted a war dance in September 2004 for the first time in 117 years in opposition of the dam and Reclamation's raising project; the event reputedly inspired many environmental groups to support the tribe's position.^[64]

Tours and recreation[link]

Reclamation holds guided tours of the Shasta Dam year round, each taking two to three hours. There also are a visitor center and auditorium. The tours comprise a 428-foot (130 m) elevator ride to the base of the dam, and visits to the dam's inner galleries and the powerhouse among other areas.^[65] Shasta Lake has a surface of 30,310 acres (12,270 ha) at full pool and is surrounded by the Shasta-Trinity National Forest. Many public and private marinas, campgrounds, RV parks, resorts and boat launches border the reservoir, one of the most popular recreational lakes in California. Houseboating, water-skiing, swimming and fishing are among the numerous activities available at the lake; hiking, picnicking, mountain biking, hunting and camping are popular in the mountainous vicinity surrounding it.^[66][67]

Shasta Dam on January 6, 2006

See also[link]

• California Aqueduct
• John L. Savage
• List of dams and reservoirs in California
• List of tallest dams in the world
• New Deal
• Water in California

References[link]

Works cited[link]

• Benke, Arthur C.; Cushing, Colbert E. (2005). Rivers of North America. Academic Press. ISBN 0-12-088253-1. 
• Billington, David P.; Jackson, Donald Conrad (2006). Big dams of the New Deal era: a confluence of engineering and politics. University of Oklahoma Press. ISBN 0-8061-3795-9. 
• Billington, David P.; Jackson, Donald Conrad; Melosi, Martin V. (2005). The History of Large Federal Dams: Planning, Design and Construction. Government Printing Office. ISBN 0-16-072823-1. http://www.usbr.gov/history/HistoryofLargeDams/LargeFederalDams.pdf. Retrieved 2011-01-22. 
• de Roos, Robert William (2000). The Thirsty Land: The Story of the Central Valley Project. Beard Books. ISBN 1-58798-024-X. 
• Ferraro, Gary (2006). Cultural anthropology: an applied perspective. Cengage Learning. ISBN 0-495-10008-0. 
• Hundley, Norris (2001). The great thirst: Californians and water – a history. University of California Press. ISBN 0-520-22456-6. 
• Rocca, Al (2004). Redding. Images of America. Arcadia Publishing. ISBN 0-7385-2934-6. 
• Rocca, Al (2002). Shasta Lake: Boomtowns and the Building of Shasta Dam. Images of America. Arcadia Publishing. ISBN 0-7385-2076-4. 
• Stevens, Joseph E. (1990). Hoover Dam: An American Adventure. University of Oklahoma Press. ISBN 0-8061-2283-8. 
• Warner, Richard E.; Hendrix, Kathleen M. (1984). California riparian systems: ecology, conservation and productive management. University of California Press. ISBN 0-520-05035-5. 

External links[link]

Wikimedia Commons has media related to: Shasta Dam

• Shasta Dam’s Full History Must Be Told