Louisville Extreme Park

Lee and Joe Jamail Skatepark in Houston, Texas (USA)

Skatepark in Davis, California, U.S.

BMX rider in bat mans cave

Pedlow Skate Park, San Fernando Valley, CA

Louisville Extreme Park, Kentucky

A skatepark is a purpose-built recreational environment made for skateboarding, BMX and aggressive inline skating. A skatepark may contain half-pipes, quarter pipes, spine transfers, handrails, funboxes, vert ramps, pyramids, banked ramps, full pipes, pools, bowls, snake runs stairsets, and any number of other objects.

History[link]

The first skatepark in the world, Carlsbad Skatepark, in Carlsbad, California, was designed and built by inventors Jack Graham and John O'Malley in March 1976. In more extreme climates parks were built indoors, often of wood or metal. By the end of 1970s the skateboarding fad had waned, and the original parks of the era began to close. A downturn in the general skateboard market in the 1980s and high liability insurance premiums contributed to the demise of the original skateparks. Some second-generation parks such as Upland, California's Pipeline survived into the 1980s. However, few of the private parks of the 1970s remain, with the notable exception of Kona Skatepark in Jacksonville, Florida, United States.^[1] However, many public parks of that era can still be found throughout Western Europe, Australia and New Zealand.^{[citation needed]}

The modern skatepark designs of the Pacific Northwest can be traced back to Burnside Skatepark, a DIY "barge build" beneath the Burnside Bridge in Portland, Oregon. Skateboarders used an area populated primarily by the city's "undesirable elements" to create a skatepark, building one section at a time. The process is called "design/build" (D/B), and is a characteristic of many skateparks today. The design/build process ensures that adjacent skatepark features are harmonious and rideable, allowing skateboarders to create endless "lines" to ride among the many features.

Skate parks, related obstacles/ramps and locations designed for extreme sport utilization have made their way into the media over time, such as with the aforementioned Burnside Skatepark being included in the movie Free Willy.

Public skateparks have had a resurgence in the US, made possible by legislation such as California's 1998 law stating that skateboarding is an inherently "Hazardous Recreational Activity" (HRA), and therefore municipalities and their employees may not be held liable for claims of negligence resulting in skateboarders' injuries.

Street skating has blurred the line between skateparks and street spots. Some cities are starting to put in skate spots/plazas with features that would not have been classically designed for skateboarding, but can be skated by street skaters legally. In some instances, even spots that were not designed for skateboarding have been made legal so that cities did not need to build a new park for skaters. The Skate Plazas allow for legal street skateboarding.

There is also a movement of making art and sculpture skate-able. This provides for more legal skate spots that are blended in with other city art and landscape. They can often even be picturesque destinations for both skaters and non-skaters.

The world's largest skatepark is located in Shanghai.

Types of skateparks[link]

Unlike organized sports, like basketball or football, skateboarding has no set arena or rules and skateparks have no standard design template. Each skatepark is designed specifically to provide unique challenges to its users. There are, however, three main categories of skatepark design: bowl, street plaza and flow parks.

Bowl parks are designed to emulate and improve upon the pool skating experience. Skaters in bowl parks can move around the park without taking their feet off the board to push. The curved walls of bowls allow skaters to ride around and across the bowl in addition to the back and forth skating you might see on a traditional half pipe. Bowls and bowl parks come in an endless variety of shapes and sizes but most bowls are between 3' and 12’ deep.

Street plaza parks are the favorite of the vast majority of skaters and they are designed to emulate and improve upon the street skating experience. Obstacles in a street plaza are styled to look like natural street terrain such as stairs, railings, planters and benches. Skaters will push off with their feet to gain momentum in a street plaza.

Flow parks combine elements of both bowl parks and street plazas. In a well designed flow park a skater can pump around the parks curved walls such as quarter pipes, pump bumps and bowl corners without taking their feet off to push. They can use that speed to hit street obstacles such as stairs, railings and benches.

Skateparks may be privately or publicly owned. Privately owned skateparks usually have admission fees, while publicly owned skateparks are generally free. Many privately owned skateparks are indoors, usually in warehouses, roller rinks or buildings with high ceilings, especially in areas with snowy winters. Public skateparks are usually outdoors.

Skatepark construction can be divided into two major categories- prefabricated and custom built concrete. Prefabricated parks can be made of wood, plastic, sheet metal, and concrete. Most are designed and built by playground equipment manufacturers who present these parks as a cost effective alternative to custom designed concrete skateparks. In reality, custom built concrete skateparks can be quite cost competitive with prefabricated skate ramps.

Concrete parks, now "pretty much the industry standard", according to an editor of Transworld Skateboarding magazine, they require fewer repairs and less maintenance.^[2]

Common obstacles[link]

• Quarter pipes – Literal quarter of a pipe.
• Spines – Two quarter pipes back to back.
• Flat banks – These can vary in angle but are simply an angled wall for which to ride on.
• Wall rides/vert walls – A vertical wall above either quarter pipes or flat banks.
• Mini ramps– Two small quarter pipes facing one another, like a halfpipe, but with a short flat area between.
• Hips – Essentially two quarter pipes or flat banks, each with one edge at a right angle or a more aggressive angle to the other.
• Funboxes – An extension of a quarter pipe, usually a flat section on top of a quarter pipe.
• Pyramids – Four wedges put in a square pyramid shape.
• Launches – A curved ramp a rider uses to launch into the air.
• Roll-ins – A long sloping ramp used to gain speed.
• Euro/Euro gap – A ramp where a platform is higher than the top of the ramp, it is usually separated by a flat section between the ramp and raised platform.
• Half-pipe – Two Quarter Pipes joined together (half of a pipe).
• Bowl – A ramp that is the shape of a bowl .
• Pool – A bowl with an irregular shape, or a pool that was used for swimming.
• Foam Pits – A pile of foam pads to land safely into while learning tricks, usually found after a launch ramp.
• Flat bar – A rail placed on flat ground.
• Stair – A simple staircase.
• Hand rail – A rail going with a staircase, either extended from the staircase or off an adjacent wall
• Cradle – Spherical bowl turned on its side, typically connected with a bowl. Enables inverted and over-vert carving
• Jersey barrier - often used as center dividers of roads. Skaters can wallride up them and sometimes DIY skaters will pour cement up to them to create a smoother transition

Notable skateparks[link]

See Category:Skateparks

US[link]

• Bro Bowl - One of the last skateparks of the 70s, and one of the oldest skateparks in the U.S.; First public skatepark in Florida Tampa, Florida
• The Flow Skatepark - Columbus, Ohio - One of the largest indoor skateparks in the United States at 50,000 square feet (4,600 m²).
• Alamosa Skatepark Environment - Albuquerque, New Mexico.
• Louisville Extreme Park - Louisville, Kentucky
• Skatepark of Tampa - Skatepark in Tampa and home of the annual Tampa Pro.
• FDR Skatepark - Philadelphia, Pennsylvania
• Concrete Wave Country - Nashville's first public skatepark.
• Skatopia - Anarchist Skatepark in Rutland, Ohio
• Pedlow Skate Park - Encino, California great for pool skating, more than 12,000 square feet (1,100 m²).
• Burnside Skatepark - Portland, Oregon featured in Tony Hawk video games and the movie Paranoid Park.
• Hollywood Skatepark - Las Vegas, Nevada one of the U.S. largest outdoor concrete skateparks.
• Turf Skatepark - Built in 1979, included five concrete pools in a indoor/outdoor facility in Milwaukee, Wisconsin (defunct since 1996).
• etnies Skatepark, Lake Forest, CA – Largest free skatepark in California.^[3]
• Lee and Joe Jamail Skatepark – 30,000-square-foot (2,800 m²) in-ground public facility in Houston, Texas (USA)
• Santa Maria Skate Park – Fletcher Park. 700 Southside Pkwy, Santa Maria, California.
• Waterford Skatepark - Waterford, Connecticut, One of the most popular outdoor skateparks in Connecticut

Others[link]

• Shaw Millennium Skatepark (Calgary, Alberta, Canada) - One the world's largest outdoor skateparks, designed by Spectrum Skateparks with Landplan associates.
• Stockwell Skatepark - South London, UK
• Harrow Skate Park - Harrow, UK
• Livingston skatepark, Livingston, Scotland - opened in 1981, is known worldwide for its transitions and bowls and was described by the cast of Dirty Sanchez as "the best skatepark in the world, except for the ones in Wales."^{[citation needed]}

References[link]

External links[link]

Wikimedia Commons has media related to: Skateparks

• The Justme Skatespot Guide - A directory of skateparks around the world with maps, footage and information.
• Skateboardpark - A directory of skateparks around the world.
• SkateSpotter - skatepark videos, photos, and maps
• skateparks.co - Large Skatepark Directory
• SkateparkHunter - Skatepark Directory with photos and maps
• Concrete Disciples - The most comprehensive worldwide Skatepark
• List of skateparks around the world - churF international skateboard community
• World Skateboarding Map - Community built map with videos and pictures
• Skate Parks Maps (extremesportsmap.com) - See worldwide skateparks on Google Maps
• Skateboard411 Skatepark Directory - Large skatepark directory with Google Maps feed
• iSKATEhere - Map-based directory of skateparks and skate spots around the world
• ChicagoSkateSpots.com - Online and Mobile directory for skate spots and parks in Chicago - Chicago Skate Spots online directory
• Sk8 Park at Burning Man in Black Rock City, NV - Participant created skatepark

This article does not cite any references or sources. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. (December 2010)

Graham Jarvis (August 25, 1930 – April 16, 2003) was a Canadian character actor in American films and television from the 1960s.

Born in Toronto, Jarvis attended Williams College before moving to New York to pursue a career in theater. Jarvis appeared on such television programs as Naked City, Route 66, N.Y.P.D., All in the Family, Mary Hartman, Mary Hartman, M*A*S*H, Mork & Mindy, Starsky and Hutch, Cagney and Lacey, Fame, Married... with Children, Star Trek: The Next Generation, The X Files, ER, and Six Feet Under. He also played character roles in many films. His last major part was as "Charles Jackson", father of Annie Jackson Camden in the Warner Brothers TV drama 7th Heaven, a role that he filled until his death.

Jarvis acted in the role of Elliot Sinclair in the Journeyman Project trio of video games and was also the narrator in the first American production of The Rocky Horror Show at the Roxy Theatre in Los Angeles, playing alongside Meat Loaf and Tim Curry.

He lived in Los Angeles with his wife Joanna Jarvis, and two sons Alex and Matt. Jarvis was also the uncle of former AIMR President Peter Jarvis. In 2003, he died from multiple myeloma. He was interred at Pierce Brothers Valley Oaks Memorial Park in Westlake Village, California.

Selected Filmography[link]

• Bye Bye Braverman (1968)
• Alice's Restaurant (1969)
• The Out-of-Towners (1970)
• Cold Turkey (1971)
• Prophecy (1979)
• Silkwood (1983)
• Tough Guys (1986)
• Misery (1990)
• Last of the Dogmen (1995)

External links[link]

Biography portal

• Graham Jarvis at Find a Grave
• Graham Jarvis at the Internet Movie Database
• Graham Jarvis at Memory Alpha (a Star Trek wiki)

This article about a Canadian film actor or actress is a stub. You can help Wikipedia by expanding it. v t e

Curren Caples is an American skateboarder. He was born in Ventura, California, USA,^[1] on January 10, 1996.^[2]

In 2010, at age 14, he competed in his first summer X-Games,^[3] where he finished fourth in the Skateboard Park event.

Caples is sponsored by Flip Skateboards, Independent Truck Company, Bones Wheels, Hurley, Vans, and Red Bull.^[4]

Competitive history[link]

References[link]