Figure 1: Comet Shoemaker-Levy 9 in 1994 after breaking up under the influence of Jupiter's tidal forces during a previous pass in 1992.

The tidal force is a secondary effect of the force of gravity and is responsible for the tides. It arises because the gravitational force per unit mass exerted on one body by a second body is not constant across its diameter, the side nearest to the second being more attracted by it than the side farther away. Stated differently, the tidal force is a differential force. Consider three things being pulled by the moon: the oceans nearest the moon, the solid earth, and the oceans farthest from the moon. The moon pulls on the solid earth, but it pulls harder on the near oceans, so they approach the moon more causing a high tide; and the moon pulls least of all on the far oceans (on the other side of the planet), so they stay behind more, causing another high tide at the same time. If we imagine looking at the Earth from space, we see that the whole Earth was pulled, but the near oceans more and the far oceans less; the far oceans stayed behind since they are pulled less (since they are farther away).

In a more general usage in celestial mechanics, the expression 'tidal force' can refer to a situation in which a body or material (for example, tidal water, or the Moon) is mainly under the gravitational influence of a second body (for example, the Earth), but is also perturbed by the gravitational effects of a third body (for example, by the Moon in the case of tidal water, or by the Sun in the case of the Moon). The perturbing force is sometimes in such cases called a tidal force^[1] (for example, the perturbing force on the Moon): it is the difference between the force exerted by the third body on the second and the force exerted by the third body on the first.^[2]

Explanation[link]

Figure 2: The Moon's gravity differential field at the surface of the Earth is known (along with another and weaker differential effect due to the Sun) as the Tide Generating Force. This is the primary mechanism driving tidal action, explaining two tidal equipotential bulges, and accounting for two high tides per day. In this figure, the Moon is either on the right side or on the left side of the Earth (at center). The outward direction of the arrows on the right and left indicates that where the Moon is overhead (or at the nadir) its perturbing force opposes and weakens the Earth's net attraction; and the inward direction of the arrows at top and bottom indicates that where the Moon is 90 degrees away from overhead, its perturbing effect reinforces and strengthens the Earth's net attraction.

When a body (body 1) is acted on by the gravity of another body (body 2), the field can vary significantly on body 1 between the side of the body facing body 2 and the side facing away from body 2. Figure 2 shows the differential force of gravity on a spherical body (body 1) exerted by another body (body 2). These so called tidal forces cause strains on both bodies and may distort them or even, in extreme cases, break one or the other apart.^[3] The Roche limit is the distance from a planet at which tidal effects would cause an object to disintegrate because the differential force of gravity from the planet overcomes the attraction of the parts of the object for one another.^[4] These strains would not occur if the gravitational field were uniform, because a uniform field only causes the entire body to accelerate together in the same direction and at the same rate.

Effects of tidal forces[link]

Figure 3: Saturn's rings are inside the orbits of its largest moons. Tidal forces oppose the material in the rings from coalescing gravitationally to form moons.^[5]

In the case of an infinitesimally small elastic sphere, the effect of a tidal force is to distort the shape of the body without any change in volume. The sphere becomes an ellipsoid with two bulges, pointing towards and away from the other body. Larger objects distort into an ovoid, and are slightly compressed, which is what happens to the Earth's oceans under the action of the Moon. The Earth and Moon rotate about their common center of mass or barycenter, and their gravitational attraction provides the centripetal force necessary to maintain this motion. To an observer on the Earth, very close to this barycenter, the situation is one of the Earth as body 1 acted upon by the gravity of the Moon as body 2. All parts of the Earth are subject to the Moon's gravitational forces, causing the water in the oceans to redistribute, forming bulges on the sides near the Moon and far from the Moon.^[6]

When a body rotates while subject to tidal forces, internal friction results in the gradual dissipation of its rotational kinetic energy as heat. If the body is close enough to its primary, this can result in a rotation which is tidally locked to the orbital motion, as in the case of the Earth's moon. Tidal heating produces dramatic volcanic effects on Jupiter's moon Io. Stresses caused by tidal forces also cause a regular monthly pattern of moonquakes on Earth's Moon.

Tidal forces contribute to ocean currents, which moderate global temperatures by transporting heat energy toward the poles. It has been suggested that in addition to other factors, harmonic beat variations in tidal forcing may contribute to climate changes.^[7]

Tidal effects become particularly pronounced near small bodies of high mass, such as neutron stars or black holes, where they are responsible for the "spaghettification" of infalling matter. Tidal forces create the oceanic tide of Earth's oceans, where the attracting bodies are the Moon and, to a lesser extent, the Sun.

Tidal forces are also responsible for tidal locking and tidal acceleration.

Mathematical treatment[link]

For a given (externally-generated) gravitational field, the tidal acceleration at a point with respect to a body is obtained by vectorially subtracting the gravitational acceleration at the center of the body (due to the given externally-generated field) from the gravitational acceleration (due to the same field) at the given point. Correspondingly, the term tidal force is used to describe the forces due to tidal acceleration. Note that for these purposes the only gravitational field considered is the external one; the gravitational field of the body (as shown in the graphic) is not relevant. (In other words the comparison is with the conditions at the given point as they would be if there were no externally-generated field acting unequally at the given point and at the center of the reference body. The externally-generated field is usually that produced by a perturbing third body, often the Sun or the Moon in the frequent example-cases of points on or above the Earth's surface in a geocentric reference frame.).

Figure 4: Graphic of tidal forces; the gravity field is generated by a body to the right. The top picture shows the gravitational forces; the bottom shows their residual once the field of the sphere is subtracted; this is the tidal force. See Figure 2 for a more exact version

Tidal acceleration does not require rotation or orbiting bodies; for example, the body may be freefalling in a straight line under the influence of a gravitational field while still being influenced by (changing) tidal acceleration.

By Newton's law of universal gravitation and laws of motion, a body of mass m a distance R from the center of a sphere of mass M feels a force Failed to parse (Missing texvc executable; please see math/README to configure.): \vec F_g

equivalent to an acceleration Failed to parse (Missing texvc executable; please see math/README to configure.): \vec a_g

, where:

Failed to parse (Missing texvc executable; please see math/README to configure.): \vec F_g = - \hat r ~ G ~ \frac{M m}{R^2}

. . . , and . . . Failed to parse (Missing texvc executable; please see math/README to configure.): \vec a_g = - \hat r ~ G ~ \frac{M}{R^2}
. . . ,

where Failed to parse (Missing texvc executable; please see math/README to configure.): \hat r

is a unit vector pointing from the body M to the body m (here, acceleration from m towards M has negative sign).

Consider now the acceleration due to the sphere of mass M experienced by a particle in the vicinity of the body of mass m. With R as the distance from the center of M to the center of m, let ∆r be the (relatively small) distance of the particle from the center of the body of mass m. For simplicity, distances are first considered only in the direction pointing towards or away from the sphere of mass M. If the body of mass m is itself a sphere of radius ∆r, then the new particle considered may be located on its surface, at a distance (R ± ∆r) from the centre of the sphere of mass M, and ∆r may be taken as positive where the particle's distance from M is greater than R. Leaving aside whatever gravitational acceleration may be experienced by the particle towards m on account of m's own mass, we have the acceleration on the particle due to gravitational force towards M as:

Failed to parse (Missing texvc executable; please see math/README to configure.): \vec a_g = - \hat r ~ G ~ \frac{M}{(R \pm \Delta r)^2}

Pulling out the R² term from the denominator gives:

Failed to parse (Missing texvc executable; please see math/README to configure.): \vec a_g = - \hat r ~ G ~ \frac{M}{R^2} ~ \frac{1}{(1 \pm \Delta r / R)^2}

The Maclaurin series of 1/(1 + x)² is 1 – 2x + 3x² – ..., which gives a series expansion of:

Failed to parse (Missing texvc executable; please see math/README to configure.): \vec a_g = - \hat r ~ G ~ \frac{M}{R^2} \pm \hat r ~ G ~ \frac{2 M }{R^2} ~ \frac{\Delta r}{R} - \cdots

The first term is the gravitational acceleration due to M at the center of the reference body Failed to parse (Missing texvc executable; please see math/README to configure.): m , i.e. at the point where Failed to parse (Missing texvc executable; please see math/README to configure.): \Delta r

is zero. This term does not affect the observed acceleration of particles on the surface of m because with respect to M, m (and everything on its surface) is in free fall. When the force on the far particle is subtracted from the force on the near particle, this first term cancels, as do all other even-order terms. The remaining (residual) terms represent the difference mentioned above and are tidal force (acceleration) terms. When ∆r is small compared to R, the terms after the first residual term are very small and can be neglected, giving the approximate tidal acceleration Failed to parse (Missing texvc executable; please see math/README to configure.): \vec a_t

(axial) for the distances ∆r considered, along the axis joining the centers of m and M:

Failed to parse (Missing texvc executable; please see math/README to configure.): \vec a_t

(axial) Failed to parse (Missing texvc executable; please see math/README to configure.): ~ \approx ~ \pm ~ \hat r ~ 2 \Delta r ~ G ~ \frac{M}{R^3}

When calculated in this way for the case where ∆r is a distance along the axis joining the centers of m and M, Failed to parse (Missing texvc executable; please see math/README to configure.): \vec a_t

is directed outwards from to the center of m (where ∆r is zero).

Tidal accelerations can also be calculated away from the axis connecting the bodies m and M, requiring a vector calculation. In the plane perpendicular to that axis, the tidal acceleration is directed inwards (towards the center where ∆r is zero), and its magnitude is Failed to parse (Missing texvc executable; please see math/README to configure.): | \vec a_t (axial)Failed to parse (Missing texvc executable; please see math/README to configure.): | /2

in linear approximation as in Figure 2.

The tidal accelerations at the surface of planets in the Solar System are generally very small. For example, the lunar tidal acceleration at the Earth's surface along the Moon-Earth axis is about 1.1 × 10⁻⁷ g, while the solar tidal acceleration at the Earth's surface along the Sun-Earth axis is about 0.52 × 10⁻⁷ g, where g is the gravitational acceleration at the Earth's surface. Modern estimates put the size of the tide-raising force (acceleration) due to the Sun at about 45% of that due to the Moon.^[8] The solar tidal acceleration at the Earth's surface was first given by Newton in the 'Principia'^[9]

Relation with centrifugal force[link]

If a secondary body orbits a primary body, the forces that could tear the second body apart if its strength and internal gravity are not enough, are the tidal force and the "centrifugal force" associated with any rotation of the secondary body about its axis.^{[citation needed]}

See also[link]

• Tidal resonance
• Roche limit
• Tidal locking
• Tidal acceleration
• Galactic tide

References[link]

External links[link]

• Gravitational Tides by J. Christopher Mihos of Case Western Reserve University
• Audio: Cain/Gay - Astronomy Cast Tidal Forces - July 2007.

Physical oceanography – Waves and Currents Waves Airy wave theory Ballantine Scale Benjamin–Feir instability Boussinesq approximation Breaking wave Clapotis Cnoidal wave Cross sea Dispersion Infragravity waves Edge wave Equatorial waves Fetch Freak wave Gravity wave Internal wave Kelvin wave Luke's variational principle Mild-slope equation Radiation stress Rogue wave Rossby wave Rossby-gravity waves Sea state Seiche Significant wave height Sneaker wave Soliton Stokes boundary layer Stokes drift Surf wave Swells Tsunami Undertow Ursell number Wave base Wave–current interaction Wave height Wave power Wave setup Wave shoaling Wave radar Wave turbulence Waves and shallow water Shallow water equations Wind wave Wind wave model More... Circulation Atmospheric circulation Baroclinity Boundary current Coriolis effect Downwelling Eddy Ekman layer Ekman spiral Ekman transport El Niño-Southern Oscillation Geostrophic current Gulf Stream Halothermal circulation Humboldt Current Hydrothermal circulation Global circulation model Langmuir circulation Longshore drift Loop Current Maelstrom Ocean current Ocean dynamics Ocean gyre Rip current Thermohaline circulation Shutdown of thermohaline circulation Subsurface currents Sverdrup balance Whirlpool Upwelling GLODAP MOM POM WOCE More... Tides Amphidromic point Earth tide Head of tide Internal tide Lunitidal interval Perigean spring tide Rule of twelfths Slack water Spring/neap tide Tidal bore Tidal force Tidal power Tidal race Tidal range Tidal resonance Tide Tide gauge Tideline More...   Physical oceanography – Other Landforms Abyssal fan Abyssal plain Atoll Bathymetric chart Cold seep Continental margin Continental rise Continental shelf Contourite Hydrography Guyot Oceanic basin Oceanic plateau Oceanic trench Passive margin Seabed Seamount Submarine canyon Coastal geography More... Plate tectonics Black smoker Convergent boundary Divergent boundary Fracture zone Hydrothermal vent Marine geology Mid-ocean ridge Mohorovičić discontinuity Vine–Matthews–Morley hypothesis Oceanic crust Outer trench swell Ridge push Seafloor spreading Slab pull Slab suction Slab window Subduction Transform fault Volcanic arc More... Ocean zones Benthic Deep ocean water Deep sea Littoral Mesopelagic Oceanic zone Pelagic Photic Surf zone Sea level Current sea level rise Future sea level Sea-level curve DART GLOSS NOOS OSTM WGS Acoustics Ocean acoustic tomography Sofar bomb SOFAR channel Underwater acoustics Hydroacoustics Other Alvin Argo Benthic lander Color of water Marginal sea Mooring Ocean Ocean energy Ocean exploration Ocean observations Ocean pollution Ocean reanalysis Ocean surface topography Ocean thermal energy conversion Oceanography Pelagic sediments Sea surface microlayer Sea surface temperature Seawater Science On a Sphere Thermocline Underwater glider Water column World Ocean Atlas NODC More...