The duodecimal system (also known as base-12 or dozenal) is a positional notation numeral system using twelve as its base. In this system, the number ten may be written as "A", "T" or "X", and the number eleven as "B" or "E" (another common notation, introduced by Sir Isaac Pitman, is to use a rotated "2" for ten and a reversed "3" for eleven). The number twelve (that is, the number written as "12" in the base ten numerical system) is instead written as "10" in duodecimal (meaning "1 dozen and 0 units", instead of "1 ten and 0 units"), whereas the digit string "12" means "1 dozen and 2 units" (i.e. the same number that in decimal is written as "14"). Similarly, in duodecimal "100" means "1 gross", "1000" means "1 great gross", and "0.1" means "1 twelfth" (instead of their decimal meanings "1 hundred", "1 thousand", and "1 tenth").

The number twelve, a highly composite number, is the smallest number with four non-trivial factors (2, 3, 4, 6), and the smallest to include as factors all four numbers (1 to 4) within the subitizing range. As a result of this increased factorability of the radix and its divisibility by a wide range of the most elemental numbers (whereas ten has only two non-trivial factors: 2 and 5, with neither 3 nor 4), duodecimal representations fit more easily than decimal ones into many common patterns, as evidenced by the higher regularity observable in the duodecimal multiplication table. As a result, duodecimal is sometimes named the number system with the most optimal radix economy.^{[citation needed]} Of its factors, 2 and 3 are prime, which means the reciprocals of all 3-smooth numbers (such as 2, 3, 4, 6, 8, 9...) have a terminating representation in duodecimal. In particular, the five most elementary fractions (½, ⅓, ⅔, ¼ and ¾) all have a short terminating representation in duodecimal (0.6, 0.4, 0.8, 0.3 and 0.9, respectively), and twelve is the smallest radix with this feature (since it is the least common multiple of 3 and 4). This all makes it a more convenient number system for computing fractions than most other number systems in common use, such as the decimal, vigesimal, binary, octal and hexadecimal systems, although the sexagesimal system (where the reciprocals of all 5-smooth numbers terminate) does better in this respect (but at the cost of an unwieldy multiplication table).

Origin[link]

In this section, numerals are based on decimal places. For example, 10 means ten, 12 means twelve.

Languages using duodecimal number systems are uncommon. Languages in the Nigerian Middle Belt such as Janji, Gbiri-Niragu (Kahugu), the Nimbia dialect of Gwandara;^[1] the Chepang language of Nepal^[2] and the Mahl language of Minicoy Island in India are known to use duodecimal numerals. In fiction, J. R. R. Tolkien's Elvish languages use a hybrid decimal-duodecimal system, primarily decimal but with special names for multiples of six.

Germanic languages have special words for 11 and 12, such as eleven and twelve in English, which are often misinterpreted as vestiges of a duodecimal system.^{[citation needed]} However, they are considered to come from Proto-Germanic *ainlif and *twalif (respectively one left and two left), both of which were decimal.

Historically, units of time in many civilizations are duodecimal. There are twelve signs of the zodiac, twelve months in a year, and the Babylonians had twelve hours in a day (although at some point this was changed to 24). Traditional Chinese calendars, clocks, and compasses are based on the twelve Earthly Branches.

Being a versatile denominator in fractions may explain why we have 12 inches in an imperial foot, 12 ounces in a troy pound, 12 old British pence in a shilling, 24 (12×2) hours in a day, and many other items counted by the dozen, gross (144, square of 12) or great gross (1728, cube of 12). The Romans used a fraction system based on 12, including the uncia which became both the English words ounce and inch. Pre-decimalisation, the United Kingdom and Republic of Ireland used a mixed duodecimal-vigesimal currency system (12 pence = 1 shilling, 20 shillings or 240 pence to the pound sterling or Irish pound), and Charlemagne established a monetary system that also had a mixed base of twelve and twenty, the remnants of which persist in many places.

The importance of 12 has been attributed to the number of lunar cycles in a year, and also to the fact that humans have 12 finger bones (phalanges) on one hand (three on each of four fingers).^[3] It is possible to count to 12 with your thumb acting as a pointer, touching each finger bone in turn. A traditional finger counting system still in use in many regions of Asia works in this way, and could help to explain the occurrence of numeral systems based on 12 and 60 besides those based on 10, 20 and 5. In this system, the one (usually right) hand counts repeatedly to 12, displaying the number of iterations on the other (usually left), until five dozens, i. e. the 60, are full.^[4][5]

Places[link]

In a duodecimal place system, ten can be written as A, eleven can be written as B, and twelve is written as 10. For alternative symbols, see below.

According to this notation, duodecimal 50 expresses the same quantity as decimal 60 (= five times twelve), duodecimal 60 is equivalent to decimal 72 (= six times twelve = half a gross), duodecimal 100 has the same value as decimal 144 (= twelve times twelve = one gross), etc.

Comparison to other numeral systems[link]

The number 12 has six factors, which are 1, 2, 3, 4, 6, and 12, of which 2 and 3 are prime. The decimal system has only four factors, which are 1, 2, 5, and 10; of which 2 and 5 are prime. Vigesimal adds two factors to those of ten, namely 4 and 20, but no additional prime factor. Although twenty has 6 factors, 2 of them prime, similarly to twelve, it is also a much larger base (i.e., the digit set and the multiplication table are much larger). Binary has only two factors, 1 and 2, the latter being prime. Hexadecimal has five factors, adding 4, 8 and 16 to those of 2, but no additional prime. Trigesimal is the smallest system that has three different prime factors (all of the three smallest primes: 2, 3 and 5) and it has eight factors in total (1, 2, 3, 5, 6, 10, 15, and 30), the smallest system that has four different prime factors is Base 210 and the pattern follows the primorials. Sexagesimal—which the ancient Sumerians and Babylonians among others actually used—adds the four convenient factors 4, 12, 20, and 60 to this but no new prime factors.

Conversion tables to and from decimal[link]

To convert numbers between bases, one can use the general conversion algorithm (see the relevant section under positional notation). Alternatively, one can use digit-conversion tables. The ones provided below can be used to convert any dozenal number between 0.01 and BBB,BBB.BB to decimal, or any decimal number between 0.01 and 999,999.99 to dozenal. To use them, we first decompose the given number into a sum of numbers with only one significant digit each. For example:

123,456.78 = 100,000 + 20,000 + 3,000 + 400 + 50 + 6 + 0.7 + 0.08

This decomposition works the same no matter what base the number is expressed in. Just isolate each non-zero digit, padding them with as many zeros as necessary to preserve their respective place values. If the digits in the given number include zeroes (for example, 102,304.05), these are, of course, left out in the digit decomposition (102,304.05 = 100,000 + 2,000 + 300 + 4 + 0.05). Then we use the digit conversion tables to obtain the equivalent value in the target base for each digit. If the given number is in dozenal and the target base is decimal, we get:

(dozenal) 100,000 + 20,000 + 3,000 + 400 + 50 + 6 + 0.7 + 0.08 = (decimal) 248,832 + 41,472 + 5,184 + 576 + 60 + 6 + 0.583333333333... + 0.055555555555...

Now, since the summands are already converted to base ten, we use the usual decimal arithmetic to perform the addition and recompose the number, arriving at the conversion result:

  Dozenal  ----->  Decimal
  
  100,000     =    248,832
   20,000     =     41,472
    3,000     =      5,184
      400     =        576
       50     =         60
 +      6     =   +      6
        0.7   =          0.583333333333...
        0.08  =          0.055555555555...
--------------------------------------------
  123,456.78  =    296,130.638888888888...

That is, (dozenal) 123,456.78 equals (decimal) 296,130.638888888888... ≈ 296,130.64

If the given number is in decimal and the target base is dozenal, the method is basically same. Using the digit conversion tables:

(decimal) 100,000 + 20,000 + 3,000 + 400 + 50 + 6 + 0.7 + 0.08 = (dozenal) 49,A54 + B,6A8 + 1,8A0 + 294 + 42 + 6 + 0.849724972497249724972497... + 0.0B62A68781B05915343A0B62...

However, in order to do this sum and recompose the number, we now have to use the addition tables for dozenal, instead of the addition tables for decimal most people are already familiar with, because the summands are now in base twelve and so the arithmetic with them has to be in dozenal as well. In decimal, 6 + 6 equals 12, but in dozenal it equals 10; so if we used decimal arithmetic with dozenal numbers we would arrive at an incorrect result. Doing the arithmetic properly in dozenal, we get the result:

  Decimal  ----->  Dozenal
  
  100,000     =     49,A54
   20,000     =      B,6A8
    3,000     =      1,8A0
      400     =        294
       50     =         42
 +      6     =   +      6
        0.7   =          0.849724972497249724972497...
        0.08  =          0.0B62A68781B05915343A0B62...
--------------------------------------------------------
  123,456.78  =     5B,540.943A0B62A68781B05915343A...

That is, (decimal) 123,456.78 equals (dozenal) 5B,540.943A0B62A68781B05915343A... ≈ 5B,540.94

Dozenal to decimal digit conversion[link]

Decimal to dozenal digit conversion[link]

Conversion of powers[link]

Fractions and irrational numbers[link]

Fractions[link]

Duodecimal fractions may be simple:

• ¹⁄₂ = 0.6
• ¹⁄₃ = 0.4
• ¹⁄₄ = 0.3
• ¹⁄₆ = 0.2
• ¹⁄₈ = 0.16
• ¹⁄₉ = 0.14

or complicated

• ¹⁄₅ = 0.24972497... recurring (easily rounded to 0.25)
• ¹⁄₇ = 0.186A35186A35... recurring (easily rounded to 0.187)
• ¹⁄_A = 0.124972497... recurring (rounded to 0.125)
• ¹⁄_B = 0.11111... recurring (rounded to 0.11)
• ¹⁄₁₁ = 0.0B0B... recurring (rounded to 0.0B)

As explained in recurring decimals, whenever an irreducible fraction is written in radix point notation in any base, the fraction can be expressed exactly (terminates) if and only if all the prime factors of its denominator are also prime factors of the base. Thus, in base-ten (= 2×5) system, fractions whose denominators are made up solely of multiples of 2 and 5 terminate: ¹⁄₈ = ¹⁄_(2×2×2), ¹⁄₂₀ = ¹⁄_(2×2×5) and ¹⁄₅₀₀ = ¹⁄_{(2×2×5×5×5)} can be expressed exactly as 0.125, 0.05 and 0.002 respectively. ¹⁄₃ and ¹⁄₇, however, recur (0.333... and 0.142857142857...). In the duodecimal (= 2×2×3) system, ¹⁄₈ is exact; ¹⁄₂₀ and ¹⁄₅₀₀ recur because they include 5 as a factor; ¹⁄₃ is exact; and ¹⁄₇ recurs, just as it does in decimal.

Recurring digits[link]

Arguably, factors of 3 are more commonly encountered in real-life division problems than factors of 5 (or would be, were it not for the decimal system having influenced most cultures). Thus, in practical applications, the nuisance of recurring decimals is encountered less often when duodecimal notation is used. Advocates of duodecimal systems argue that this is particularly true of financial calculations, in which the twelve months of the year often enter into calculations.

However, when recurring fractions do occur in duodecimal notation, they are less likely to have a very short period than in decimal notation, because 12 (twelve) is between two prime numbers, 11 (eleven) and 13 (thirteen), whereas ten is adjacent to composite number 9. Nonetheless, having a shorter or longer period doesn't help the main inconvenience that one does not get a finite representation for such fractions in the given base (so rounding, which introduces inexactitude, is necessary to handle them in calculations), and overall one is more likely to have to deal with infinite recurring digits when fractions are expressed in decimal than in duodecimal, because one out of every three consecutive numbers contains the prime factor 3 in its factorization, while only one out of every five contains the prime factor 5. All other prime factors, except 2, are not shared by either ten or twelve, so they do not influence the relative likeliness of encountering recurring digits (any irreducible fraction that contains any of these other factors in its denominator will recur in either base). Also, the prime factor 2 appears twice in the factorization of twelve, while only once in the factorization of ten; which means that most fractions whose denominators are powers of two will have a shorter, more convenient terminating representation in dozenal than in decimal (e.g., 1/(2²) = 0.25 dec = 0.3 doz; 1/(2³) = 0.125 dec = 0.16 doz; 1/(2⁴) = 0.0625 dec = 0.09 doz; 1/(2⁵) = 0.03125 dec = 0.046 doz; etc.).

Irrational numbers[link]

As for irrational numbers, none of them has a finite representation in any of the rational-based positional number systems (such as the decimal and duodecimal ones); this is because a rational-based positional number system is essentially nothing but a way of expressing quantities as a sum of fractions whose denominators are powers of the base, and by definition no finite sum of rational numbers can ever result in an irrational number. For example, 123.456 = 1 × 1/10⁻² + 2 × 1/10⁻¹ + 3 × 1/10⁰ + 4 × 1/10¹ + 5 × 1/10² + 6 × 1/10³ (this is also the reason why fractions that contain prime factors in their denominator not in common with those of the base do not have a terminating representation in that base). Moreover, the infinite series of digits of an irrational number does not exhibit a pattern of repetition; instead, the different digits succeed in a seemingly random fashion. The following chart compares the first few digits of the decimal and duodecimal representation of several of the most important algebraic and transcendental irrational numbers. Some of these numbers may be perceived as having fortuitous patterns, making them easier to memorize, when represented in one base or the other.

The first few digits of the decimal and dozenal representation of another important number, the Euler-Mascheroni constant (the status of which as a rational or irrational number is not yet known), are:

Advocacy and "dozenalism"[link]

The case for the duodecimal system was put forth at length in F. Emerson Andrews' 1935 book New Numbers: How Acceptance of a Duodecimal Base Would Simplify Mathematics. Emerson noted that, due to the prevalence of factors of twelve in many traditional units of weight and measure, many of the computational advantages claimed for the metric system could be realized either by the adoption of ten-based weights and measure or by the adoption of the duodecimal number system.

Rather than the symbols "A" for ten and "B" for eleven as used in hexadecimal notation and vigesimal notation (or "T" and "E" for ten and eleven), he suggested in his book and used a script X and a script E, Failed to parse (Missing texvc executable; please see math/README to configure.): x\!

(U+1D4B3) and File:Scripte.png (U+2130), to represent the digits ten and eleven respectively, because, at least on a page of Roman script, these characters were distinct from any existing letters or numerals, yet were readily available in printers' fonts. He chose Failed to parse (Missing texvc executable; please see math/README to configure.): x\!
for its resemblance to the Roman numeral X, and File:Scripte.png as the first letter of the word "eleven".

Another popular notation, introduced by Sir Isaac Pitman, is to use a rotated 2 (resembling a script τ for "ten") to represent ten and a rotated or horizontally flipped 3 (which again resembles ε) to represent eleven. This is the convention commonly employed by the Dozenal Society of Great Britain and has the advantage of being easily recognizable as digits because of their resemblance in shape to existing digits. On the other hand, the Dozenal Society of America adopted for some years the convention of using an asterisk * for ten and a hash # for eleven. The reason was the symbol * resembles a struck-through X while # resembles a doubly-struck-through 11, and both symbols are already present in telephone dials. However, critics pointed out these symbols do not look anything like digits. Some other systems write 10 as Φ (a combination of 1 and 0) and eleven as a cross of two lines (+, x, or † for example). Problems with these symbols are evident, most notably that most of them can not be represented in the seven-segment display of most calculator displays (File:Scripte.png being an exception, although "E" is used on calculators to indicate an error message). However, 10 and 11 do fit, both within a single digit (11 fits as is, while the 10 has to be tilted sideways, resulting in a character that resembles an O with a macron, ō or o). A and B also fit (although B must be represented as lowercase "b" and as such, 6 must have a bar over it to distinguish the two figures) and are used on calculators for bases higher than ten.

In "Little Twelvetoes", American television series Schoolhouse Rock! portrayed an alien child using base-twelve arithmetic, using "dek", "el" and "doh" as names for ten, eleven and twelve, and Andrews' script-X and script-E for the digit symbols. ("Dek" is from the prefix "deca", "el" being short for "eleven" and "doh" an apparent shortening of "dozen".)^[6]

The Dozenal Society of America and the Dozenal Society of Great Britain promote widespread adoption of the base-twelve system. They use the word dozenal instead of "duodecimal" because the latter comes from Latin roots that express twelve in base-ten terminology.

The renowned mathematician and mental calculator Alexander Craig Aitken was an outspoken advocate of the advantages and superiority of duodecimal over decimal:

The duodecimal tables are easy to master, easier than the decimal ones; and in elementary teaching they would be so much more interesting, since young children would find more fascinating things to do with twelve rods or blocks than with ten. Anyone having these tables at command will do these calculations more than one-and-a-half times as fast in the duodecimal scale as in the decimal. This is my experience; I am certain that even more so it would be the experience of others.

—A. C. Aitken, in The Listener, January 25, 1962^[7]

But the final quantitative advantage, in my own experience, is this: in varied and extensive calculations of an ordinary and not unduly complicated kind, carried out over many years, I come to the conclusion that the efficiency of the decimal system might be rated at about 65 or less, if we assign 100 to the duodecimal.

—A. C. Aitken, The Case Against Decimalisation (Edinburgh / London: Oliver & Boyd, 1962)^[8]

In Leo Frankowski's Conrad Stargard novels, Conrad introduces a duodecimal system of arithmetic at the suggestion of a merchant, who is accustomed to buying and selling goods in dozens and grosses, rather than tens or hundreds. He then invents an entire system of weights and measures in base twelve, including a clock with twelve hours in a day, rather than twenty-four hours.

In Lee Carroll's Kryon: Alchemy of the Human Spirit, a chapter is dedicated to the advantages of the duodecimal system. The duodecimal system is supposedly suggested by Kryon (one of the widely popular New Age channeled entities) for all-round use, aiming at better and more natural representation of nature of the Universe through mathematics. An individual article "Mathematica" by James D. Watt (included in the above publication) exposes a few of the unusual symmetry connections between the duodecimal system and the golden ratio, as well as provides numerous number symmetry-based arguments for the universal nature of the base-12 number system.^[9]

Dozenal metric systems[link]

Systems of measurement proposed by dozenalists include:

• Tom Pendlebury's TGM system^[10]
• Takashi Suga's Universal Unit System^[11]

See also[link]

• Senary (base 6)
• Quadrovigesimal (base 24)
• Hexatridecimal (base 36)
• Sexagesimal (base 60)
• Babylonian numerals

References[link]

External links[link]

• Dozenal Society of America
• Dozenal Society of Great Britain website
• Online Decimal-Dozenal Converter
• The Bases of Counting