A310
S7 Airlines A310-200 landing at Frankfurt Airport
Role	Wide-body jet airliner
Manufacturer	Airbus
First flight	3 April 1982
Introduction	April 1983
Status	Out of production, in active service
Primary users	FedEx Express Air Transat Air India Pakistan International
Produced	1983–2007
Number built	255
Developed from	Airbus A300
Variants	A310 MRTT CC-150 Polaris

The Airbus A310 is a medium- to long-range twin-engined widebody jet airliner. Launched in July 1978, it was the second aircraft to enter production by Airbus Industrie,^{[Nb 1]} the consortium of European aerospace companies which is now owned by EADS. The A310 is a shortened derivative of the A300, the first twin-engined widebody airliner.

History[link]

Background[link]

During the development of the original Airbus A300, a range of aircraft size and capacity were studied; the resulting Airbus A300B was one of the smaller options. When the A300B1 prototypes emerged, a number of airlines asked for greater capacity, which resulted in the initial production A300B4 version. As the A300 entered service, it became increasingly apparent that there was also a sizable market for a smaller aircraft; some operators did not have enough traffic to justify the relatively large A300, others wanted more frequency or lower aircraft-mile costs at the expense of higher seat-mile cost, (specifically Swissair and Lufthansa).^[1]

Airbus reduced the Research & Development costs of a smaller A300 to a minimum, studying several early projects called A300B10MC (Minimum Change). Capacity was reduced to 220 passengers, which was then a desired capacity from many airlines. However, this would result in a small fuselage mated to a comparatively large wing and oversized undercarriage, which would make the aircraft burn unnecessarily more fuel as it carries more weight.

Another problem was the rate of inflation, which in the UK, during 1979–1980, was 35%. This would significantly raise the development costs, and thus the cost of the final product.^[2] During the A300's development, Hawker Siddeley Aviation was the subcontractor for the aircraft's wing, after the British government withdrew from the newly formed venture in 1969. HSA subsequently merged with three other companies in 1977, and by then, the British government had indicated its intentions to rejoin the programme. However, British Airways (BA) and Rolls-Royce did not relinquish their will to collaborate with the Americans, and, in BA's case, buy US aircraft. BA wanted to buy 7N7 and 7X7, which would develop into the Boeing 757 and 767, with the latter an intended rival to the upcoming A310, as well as the Boeing 747. The French government started talks in May 1976, saying that an order from BA was a condition for re-admission of the UK into Airbus Industrie as a full partner. As this went on, BAe held talks with Boeing and McDonnell Douglas to see if it (BAe) could participate in future programmes, although the company's chairman, Lord Beswick, publicly stated that the aim was really to collaborate in Europe.^[3] At the 1978 Farnborough Air Show, Eric Varley, the British Secretary of State for Industry, announced that BAe wished to rejoin the Airbus Industrie as a full partner from 1 January 1979. This would mean BAe would be allocated 20% shareholding and would play "a full part in the development and manufacturing of the A310".^[4]

Design effort[link]

From late 1977, before the Varley announcement BAe started work on the new wing at Hatfield. Simultaneously, Aérospatiale, MBB (Messerschmitt-Bölkow-Blohm) and VFW-Fokker held their individual studies into the new wing.^{[citation needed]}

At the April 1978 Hanover Air Show, Airbus exhibited a model A310. Its wing area, at 219.25 m² (2,360.0 sq ft) was slightly larger than that studied, at 209 square metres (2,250 sq ft); its fuselage was 12 frames shorter than the A300,^[5] accommodating typical passenger loads of 195 in two-class, or 245 in economy.^[4] However, during the next 12 months, almost every aspect was further refined. On 9 June 1978, Swissair and Lufthansa developed a joint specification for the aircraft, and within a month, announced that they would place the launch orders. On 15 March, Swissair became the first airline to place a firm order for the type, announcing that it would acquire 10 with a further 10 under option to replace itsMcDonnell Douglas DC-9 series 30s on its major intra-European routes. Lufthansa quickly placed a $240 million 10-aircraft order. Air France and Iberia shortly followed.^[4]

The increasingly strong interest in the aircraft, coupled with the recovery of the industry in the late 1970s, led Airbus to launch the A300B10, now known as the A310, into production on 7 July 1978^{[citation needed]}. On 1 April 1979 Lufthansa raised its commitment to 25 orders and 25 options. Two days later, KLM signed its order for 10 orders and 10 options at ₤238 million.^[4][6][7] On 6 July 1979 Air France raised its order from 4 to 35.^{[citation needed]} Other airlines announcing orders for the A310 during 1979 included Martinair, Sabena and Air Afrique.^[6][7]

Initially, two versions of the A310 were planned, the regional A310-100 and the transcontinental A310-200. The A310-100 had a range of 2,000 nmi (3,700 km) with 200 passengers, whilst the -200 had a higher MTOW and centre section fuel, and could carry the same load a further 1,000 nmi (1,900 km).^[8] Basic engines offered included the General Electric CF6-45B2 and Pratt & Whitney JT9D-7R4 with the Rolls-Royce RB211-524B4 and the CF6-6 regarded as alternatives.^{[citation needed]}

Production[link]

Air Paradise International A310-300 landing at Perth Airport (2003)

The range of the A310 exceeds that of the A300-series with the exception of the A300-600R, which surpasses the A310-200. The A310's greater range has led to the aircraft being used extensively on transatlantic routes. The A300 and A310 introduced the concept of commonality: A300-600 and A310 pilots can qualify for the other aircraft with one day of training.^{[citation needed]}

Sales of the A310 continued and by the time the prototype A310-200 aircraft made its first flight on 3 April 1982, orders and options for 181 aircraft had been placed by 15 airlines worldwide, a somewhat better start than that of the original A300. It was clear that the longer-range series −200 aircraft was the more popular aircraft and Airbus decided in 1979 to stop offering the low gross weight series A310-100 (originally proposed for Lufthansa), none of which were built.^[6]

Demand for the aircraft began to slacken and there were no new A310 passenger orders during the late 1990s, due to the introduction of the advanced technology Airbus A330. The A310 (along with the A300) ceased production in July 2007, though five orders from Iraqi Airways remained on the books until July 2008. The remaining freighter sales were to be fulfilled by the new A330-200F derivative.^[9]

The A310 was marketed as an introduction to widebody operations for developing airlines. The A310 was replaced in Airbus' lineup by the highly successful A330-200, which shares its fuselage cross-section. Between 1983 and the last aircraft produced in 1998, 255 A310s were delivered.^{[citation needed]}

The A300 and A310 established Airbus as a competitor to Boeing and allowed it to go ahead with the more ambitious A320 and A330/A340 families.^{[citation needed]}

The A310 and the A300 officially ceased production in July 2007 although the last A310 delivery was in June 1998. As of August 2010, 255 A310s have been delivered, 193 of which are still in operation.

Design[link]

This section needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. (November 2010)

This section is in a list format that may be better presented using prose. You can help by converting this section to prose, if appropriate. Editing help is available. (February 2011)

The A310 was a development of the A300; the aircraft was initially designated the A300B10. Essentially a "baby" A300, the main differences in the two aircraft are:

• Shortened fuselage: same cross section, providing capacity of about 200 passengers
• Redesigned rear fuselage: altered tapering and moving aft of the rear bulkhead created additional capacity (the redesign was also used for the A300-600 and A330/A340 fuselages.)
• Redesigned wing (reduced span and area), designed by British Aerospace who rejoined the Airbus consortium
• Smaller horizontal tail surface
• Later production A310s (from 1985/86) are equipped with wingtip fences to reduce the drag due to lift
• Modified undercarriage with carbon brakes fitted as standard
• Common pylons able to support all type of engines offered for the aircraft
• Increased use of composite materials in both primary and secondary structure
• Electrically actuated spoilers
• Integrated drive electrical generators
• Improved auxiliary power unit^[10]

Flight deck[link]

This unreferenced section requires citations to ensure verifiability.

The aircraft has a two crew "glass" cockpit as standard using CRT displays in place of the more traditional instrumentation, and modern electronic systems. The A310 flight deck was incorporated into the A300-600 enabling a dual type rating to be achieved. The flight deck has provisions for third and fourth crew seats.

Variants[link]

TAROM Airbus A310-325 "Transilvania" at London Heathrow Airport

Czech Airlines A310-304 during boarding

Yemenia Airbus A310-324 at airport in Paris in 2005

An Interflug Airbus A310-300. The Airbus A310 was the only western aircraft to be operated in the German Democratic Republic.

A310 MRT of the German Luftwaffe

The Konrad Adenauer A310-304^[11]

The A310 is available in two basic versions, the medium range −200 and the longer range −300. The first version of the aircraft to be developed was the −200 but this was later joined by the −300 which then became the standard production version of the aircraft.

A310-200

The first A310, the 162nd Airbus off the production line, made its maiden flight on 3 April 1982 powered by the earlier Pratt & Whitney JT9D-7R4D1 engines. The −200 entered service with Swissair and Lufthansa a year later. Also the late series −200 also featured wingfences identical to those of the −300.

A310-200C

A convertible version, the seats can be removed and cargo placed on the main deck.

A310-200F / -300F

The freight version available as a new build or as a conversion of the existing wide-bodied aircraft. The A310-200F freighter can carry 39t of freight for 5,950 km.^[12] No production freighters of the A310 were produced. Operators such as FedEx Express acquired modified ex-airline A310s, usually starting with the −300 version. They are now the world's largest A310 operator, with 53 aircraft.

A310-300

First flown on 8 July 1985, the −300 is dimensionally identical to the −200, although it provides an increased MTOW and an increase in range, provided by additional centre and horizontal stabilizer (trim-tank) fuel tanks. This model also introduced wingtip fences to improve aerodynamic efficiency, a feature that has since been retrofitted to some −200s. The aircraft entered service in 1986 with Swissair. The aircraft incorporates a computerised fuel distribution system which allows it to be trimmed in flight resulting in less drag and therefore reduced fuel burn.

This unreferenced section requires citations to ensure verifiability.

A310-300C

A convertible passenger/cargo version, the seats can be removed and cargo placed on the main deck.

A310 MRT/MRTT

The A310 has been operated by many of the world's airforces as a pure transport (A310-300 MRT), however several have now been converted to the "Multi Role Tanker Transport" configuration by EADS, providing an aerial refueling capability. At least six have been ordered; four by the German Luftwaffe and two by the Canadian Forces. Deliveries began in 2004. Three were converted at EADS EFW in Dresden, Germany; the other three at Lufthansa Technik in Hamburg, Germany. The Chilean Air Force has purchased two second-hand A310s to replace its aging 707–320 'Aguila' tanker and transports. The first was received in October 2007.

Operators[link]

Military operators[link]

This unreferenced section requires citations to ensure verifiability.

Royal Canadian Air Force CC-150 Polaris departing Ottawa Airport

The A310 has been used by the armed forces of the following countries:

 Belgium

• Belgian Air Component

 Canada

• Royal Canadian Air Force – designated CC-150 Polaris

 Egypt

• Egyptian Air Force

 France

• French Air Force

 Germany

• German Air Force

 Jordan

• Royal Jordanian Air Force - Former operator.

 Spain

• Spanish Air Force

 Pakistan

• Pakistan Air Force

 Thailand

• Royal Thai Air Force

Deliveries[link]

This unreferenced section requires citations to ensure verifiability.

By the end of production a total of 255 A310s had been ordered and delivered.

Accident and incidents[link]

This section needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. (March 2009)

• Hull-loss accidents: 10 with a total of 825 fatalities.^[13]
• Hijackings: 10 with a total of five fatalities
• 31 July 1992: Thai Airways International Flight 311, an A310-304 carrying 99 passengers and 14 crew, crashed on approach to Tribhuvan International Airport. All 113 on board were killed.
• 23 March 1994: Aeroflot Flight 593, an A310-300 carrying 63 passengers and 12 crew, crashed in Siberia after the pilot let his son sit at the controls and the autopilot partially disconnected.
• 31 March 1995: Tarom Flight 371, an A310-324 carrying 50 passengers and 10 crew crashed in Baloteşti next to Otopeni International Airport near Bucharest after a jamming of the throttle on the starboard engine followed by a lack of reaction by pilots. All 60 on board were killed.
• 11 December 1998: Thai Airways International Flight 261 crashed in Thailand.
• 30 January 2000: Kenya Airways Flight 431 crashed in the Atlantic Ocean shortly after takeoff from Abidjan on 31 January 2000.
• 12 July 2000: Hapag-Lloyd Flight 3378, an A310-304, crashed during an emergency landing in Vienna due to fuel exhaustion.
• 6 March 2005: Air Transat Flight 961, an Airbus A310-308, en route from Cuba to Quebec City with nine crew and 261 passengers on board, experienced a structural failure in which the rudder detached in flight. The crew returned to Varadero, Cuba, where they made a safe landing. It has been established that no unusual rudder inputs had been used by the crew during the flight, they were not manipulating the rudder when it failed and there was no obvious fault in the rudder or yaw-damper system. The investigation that followed determined that the manufacturer's inspection procedure for the composite rudder was not adequate. Inspection procedures for composite structures on airliners were changed because of this accident.
• 9 July 2006: S7 Airlines Flight 778, an Airbus A310-324 jet from Moscow carrying 196 passengers and eight crew, overshot the runway at Irkutsk in Siberia, plowed through a concrete barrier and caught fire as it crashed into buildings. Reports said that 70 of the 204 on board survived, with 12 missing.^[14] Since the accident, casualty figures have fluctuated, in part due to three people boarding the aircraft who were not on the passenger manifest, and some survivors walking home after being assumed trapped in the wreckage.^[15]
• 12 March 2007: Biman Bangladesh Airlines Flight BG006, an A310-325 carrying 236 passengers and crew, suffered a collapsed nose gear during its takeoff run.^[16] Fourteen people suffered minor injuries in the accident at Dubai International Airport. The aircraft came to rest at the end of the runway and was evacuated, but blocked the only active runway and forced the airport to close for nearly eight hours. The aircraft was written off.^[17]
• 10 June 2008: Sudan Airways Flight 109, an A310-324 from Amman, Jordan carrying 203 passengers and 11 crew, ran off the runway while landing at Khartoum International Airport during bad weather. Soon afterward a fire started in the aircraft's right wing area. As of 12 June reports confirmed 30 people killed with another six missing.^[18]
• 30 June 2009, Yemenia Flight 626, an A310-324 flying from Sana'a, Yemen, to Moroni, Comoros crashed into the Indian Ocean shortly before reaching its destination. The aircraft was carrying 153 passengers and crew; there was one survivor, a 12-year-old girl.^[19][20]

Specifications[link]

FedEx Express A310-200F

Hapagfly A310-304 landing at Stuttgart Airport, note deployed thrust reversers on the engines

* 157,000 kg is standard for the −300, 164,000 kg is an option.

Aircraft model designations[link]

Source: French DGAC Type Certificate Data Sheet No. 145

See also[link]

Aviation portal

• Airbus Executive and Private Aviation
• Competition between Airbus and Boeing
  

Related development

• Airbus A300
• Airbus A310 MRTT
• Airbus A330
• Airbus A340
• CC-150 Polaris
  

Aircraft of comparable role, configuration and era

• Boeing 767
  

References[link]

Notes

Citations

Bibliography

• Gunston, Bill. Airbus: The Complete Story. Sparkford, Yeovil, Somerset, UK,: Haynes Publishing, 2009. ISBN 978-1-84425-585-6. 
• Norris, Guy and Mark Wagner. Airbus. St. Paul, Minnesota: MBI Publishing, 1999. ISBN 0-7603-0677-X. 

External links[link]

Wikimedia Commons has media related to: Airbus A310

• Airbus A310 – Images, dimensions and full specifications
• Production List
• Official website