Vimeo results:
Youtube results:
Home
Menu
Playlist
Videos
open all
add
add longest videos
Loading...
Open Collage in a new Window
Email the Collage
- Loading...
Loading suggestions ...
-
8:26
Yamato VF-0 Review.wmv
Yamato VF-0 Review.wmv
-
3:47
Macross Zero - VF-0 vs SV-51-TopGun
Macross Zero - VF-0 vs SV-51-TopGunMacross Zero - VF-0 vs SV-51-TopGun
Macross Zero - VF-0 vs SV-51-TopGun.
-
1:26
Macross Zero VF-0S Trans HD.
Macross Zero VF-0S Trans HD.Macross Zero VF-0S Trans HD.
Macross Zero VF-0S Trans. © Big West 2002.
-
1:04
Mad Maneuver - VF-0 vs SV-51 from Macross Zero
Mad Maneuver - VF-0 vs SV-51 from Macross ZeroMad Maneuver - VF-0 vs SV-51 from Macross Zero
Unbelievable maneuver!
-
16:01
Machining a 3D Part in a Haas VF-0 CNC Vertical Machining Center
Machining a 3D Part in a Haas VF-0 CNC Vertical Machining CenterMachining a 3D Part in a Haas VF-0 CNC Vertical Machining Center
Machining a 3D Part in a Haas VF-0 CNC Vertical Machining Center First tool 1" insertable tool Second tool 3/4" insertable tool .0625 corner rad. Machined ou...
-
6:02
VF-0 Pheonix vs Mig-31 Firefox
VF-0 Pheonix vs Mig-31 FirefoxVF-0 Pheonix vs Mig-31 Firefox
The VF-0S from Macross Zero flies against the Mig-31 Firefox from the 1982 film.
-
4:05
Yamato 1/60 vf-0 Repacement Arm Parts
Yamato 1/60 vf-0 Repacement Arm PartsYamato 1/60 vf-0 Repacement Arm Parts
-
2:29
ALL THAT VF (VERSION 0 + F FAN EDIT)
ALL THAT VF (VERSION 0 + F FAN EDIT)ALL THAT VF (VERSION 0 + F FAN EDIT)
MACROSS 25th ANNIVERSARY AIR SHOW. My fan edit with scenes from both Version Zero and Version F, background music from the Macross Frontier O.S.T.2, [Test Fl...
-
10:55
Haas VF0 Machining Prototype Handle
Haas VF0 Machining Prototype HandleHaas VF0 Machining Prototype Handle
Machining a prototype handle in our Haas VF0 Vertical Machining Center. This was the first piece being machined using an unproven program, thus it is VERY sl...
-
5:53
VF0 19 25
VF0 19 25VF0 19 25
-
2:36
1998 Haas VF-0 "VIDEO"
1998 Haas VF-0 "VIDEO"1998 Haas VF-0 "VIDEO"
1998 Haas VF-0 "VIDEO"
-
2:17
2014 Holden VF Commodore SV6 Ute engine sound and 0-100km/h
2014 Holden VF Commodore SV6 Ute engine sound and 0-100km/h2014 Holden VF Commodore SV6 Ute engine sound and 0-100km/h
2014 Holden VF Commodore SV6 Ute engine sound and 0-100km/h. Head over to http://performancedrive.com.au/2014-holden-vf-commodore-review-australian-launch-vi...
-
7:22Haas VF-0 Roughing Base Plate
Haas VF-0 Roughing Base PlateHaas VF-0 Roughing Base Plate
Roughing out a Base Plate in our Haas VF-0 Machining Center Material = 1" x 6" x 8.25" lg. 6061 Aluminum Inserted Drill = .625" Dia. x .650" deep 7500 RPM 22...
-
8:08Machining Bearing Blocks in Haas VF0
Machining Bearing Blocks in Haas VF0Machining Bearing Blocks in Haas VF0
These are some aluminum bearing blocks we manufacture for forensic test machines. The parts are made in our Haas VF0 vertical machining center.
- Aircraft carrier
- Anime
- Artland (company)
- Astro Plan
- Bandai Visual
- Basara Nekki
- Big West Advertising
- Britai Kridanik
- Claudia LaSalle
- Exsedol Folmo
- F-14 Tomcat
- Fire Bomber
- Gamlin Kizaki
- Gun pod
- Haruhiko Mikimoto
- Hayao Kakizaki
- Hidetaka Tenjin
- Hikaru Ichijyo
- Hiroshi Onogi
- Ichiro Itano
- Jetfire
- Kazutaka Miyatake
- Kentaro Haneda
- Macross
- Macross 7
- Macross Ace Frontier
- Macross Dynamite 7
- Macross Frontier
- Macross II
- Macross operators
- Macross Plus
- Macross The Ride
- Macross Zero
- Maximilian Jenius
- Meltlandi
- Milia Fallyna Jenius
- Misa Hayase
- Mylene Flare Jenius
- Noburo Ishiguro
- Northrop Grumman
- Pratt & Whitney F100
- Protodeviln
- Quamzin Kravshera
- Robotech
- Roy Focker
- Satelight
- Science fiction
- SDF-1 Macross
- SDF-2 Megaroad-01
- Shoji Kawamori
- Space Gundam V
- Space War I
- Studio Nue
- Su-33
- SV-51
- Tatsunoko
- Template Macross
- Thermonuclear
- Turbofan
- U.N. Spacy
- Variable fighter
- Variable fighters
- Veffidas Feaze
- VF-0 Phoenix
- VF-1 Valkyrie
- VF-11 Thunderbolt
- VF-17 Nightmare
- VF-19 Excalibur
- VF-22 Sturmvogel II
- VF-25 Messiah
- VF-4 Lightning III
- VF-9 Cutlass
- Yoko Kanno
- Zentradi
Send this Playlist by SMS
Email this Page
http://wn.com/Yamato_1_60_vf-0_Repacement_Arm_Parts
Yamato VF-0 Review.wmv
- Order: Reorder
- Duration: 8:26
- Updated: 31 Jul 2013
Scorched Earth Toys @ anymoon.com reviews Yamato's 1/60 VF-0 toys as seen in the OVA Macross Zero.
http://wn.com/Yamato_VF-0_Reviewwmv
Scorched Earth Toys @ anymoon.com reviews Yamato's 1/60 VF-0 toys as seen in the OVA Macross Zero.
- published: 12 Sep 2011
- views: 2279
- author: ScorchedEarthToys
Macross Zero - VF-0 vs SV-51-TopGun
- Order: Reorder
- Duration: 3:47
- Updated: 01 Aug 2013
Macross Zero - VF-0 vs SV-51-TopGun.
http://wn.com/Macross_Zero_VF-0_vs_SV-51-TopGun
Macross Zero VF-0S Trans HD.
- Order: Reorder
- Duration: 1:26
- Updated: 17 Dec 2012
Macross Zero VF-0S Trans. © Big West 2002.
http://wn.com/Macross_Zero_VF-0S_Trans_HD
Mad Maneuver - VF-0 vs SV-51 from Macross Zero
- Order: Reorder
- Duration: 1:04
- Updated: 15 Aug 2013
Unbelievable maneuver!
http://wn.com/Mad_Maneuver_VF-0_vs_SV-51_from_Macross_Zero
Machining a 3D Part in a Haas VF-0 CNC Vertical Machining Center
- Order: Reorder
- Duration: 16:01
- Updated: 18 Aug 2013
Machining a 3D Part in a Haas VF-0 CNC Vertical Machining Center First tool 1" insertable tool Second tool 3/4" insertable tool .0625 corner rad. Machined ou...
http://wn.com/Machining_a_3D_Part_in_a_Haas_VF-0_CNC_Vertical_Machining_Center
Machining a 3D Part in a Haas VF-0 CNC Vertical Machining Center First tool 1" insertable tool Second tool 3/4" insertable tool .0625 corner rad. Machined ou...
- published: 02 Oct 2012
- views: 9018
- author: paul53090
VF-0 Pheonix vs Mig-31 Firefox
- Order: Reorder
- Duration: 6:02
- Updated: 09 Aug 2013
The VF-0S from Macross Zero flies against the Mig-31 Firefox from the 1982 film.
http://wn.com/VF-0_Pheonix_vs_Mig-31_Firefox
The VF-0S from Macross Zero flies against the Mig-31 Firefox from the 1982 film.
- published: 19 Jan 2008
- views: 144834
- author: NexAngelus405
Yamato 1/60 vf-0 Repacement Arm Parts
- Order: Reorder
- Duration: 4:05
- Updated: 11 Dec 2012
http://wn.com/Yamato_1_60_vf-0_Repacement_Arm_Parts
ALL THAT VF (VERSION 0 + F FAN EDIT)
- Order: Reorder
- Duration: 2:29
- Updated: 09 Feb 2013
MACROSS 25th ANNIVERSARY AIR SHOW. My fan edit with scenes from both Version Zero and Version F, background music from the Macross Frontier O.S.T.2, [Test Fl...
http://wn.com/ALL_THAT_VF_VERSION_0_+_F_FAN_EDIT
MACROSS 25th ANNIVERSARY AIR SHOW. My fan edit with scenes from both Version Zero and Version F, background music from the Macross Frontier O.S.T.2, [Test Fl...
- published: 04 Nov 2008
- views: 23893
- author: Howard Chu
Haas VF0 Machining Prototype Handle
- Order: Reorder
- Duration: 10:55
- Updated: 02 Aug 2013
Machining a prototype handle in our Haas VF0 Vertical Machining Center. This was the first piece being machined using an unproven program, thus it is VERY sl...
http://wn.com/Haas_VF0_Machining_Prototype_Handle
Machining a prototype handle in our Haas VF0 Vertical Machining Center. This was the first piece being machined using an unproven program, thus it is VERY sl...
- published: 23 Feb 2013
- views: 170
- author: wrustlecmc
1998 Haas VF-0 "VIDEO"
- Order: Reorder
- Duration: 2:36
- Updated: 01 Mar 2013
1998 Haas VF-0 "VIDEO"
http://wn.com/1998_Haas_VF-0_VIDEO
2014 Holden VF Commodore SV6 Ute engine sound and 0-100km/h
- Order: Reorder
- Duration: 2:17
- Updated: 14 Aug 2013
2014 Holden VF Commodore SV6 Ute engine sound and 0-100km/h. Head over to http://performancedrive.com.au/2014-holden-vf-commodore-review-australian-launch-vi...
http://wn.com/2014_Holden_VF_Commodore_SV6_Ute_engine_sound_and_0-100km_h
2014 Holden VF Commodore SV6 Ute engine sound and 0-100km/h. Head over to http://performancedrive.com.au/2014-holden-vf-commodore-review-australian-launch-vi...
- published: 29 May 2013
- views: 11752
- author: PDriveTV
Haas VF-0 Roughing Base Plate
- Order: Reorder
- Duration: 7:22
- Updated: 12 Feb 2012
Roughing out a Base Plate in our Haas VF-0 Machining Center Material = 1" x 6" x 8.25" lg. 6061 Aluminum Inserted Drill = .625" Dia. x .650" deep 7500 RPM 22...
http://wn.com/Haas_VF-0_Roughing_Base_Plate
Roughing out a Base Plate in our Haas VF-0 Machining Center Material = 1" x 6" x 8.25" lg. 6061 Aluminum Inserted Drill = .625" Dia. x .650" deep 7500 RPM 22...
- published: 02 Mar 2011
- views: 726
- author: wrustlecmc
Machining Bearing Blocks in Haas VF0
- Order: Reorder
- Duration: 8:08
- Updated: 16 May 2013
These are some aluminum bearing blocks we manufacture for forensic test machines. The parts are made in our Haas VF0 vertical machining center.
http://wn.com/Machining_Bearing_Blocks_in_Haas_VF0
These are some aluminum bearing blocks we manufacture for forensic test machines. The parts are made in our Haas VF0 vertical machining center.
- published: 26 Jan 2013
- views: 80
- author: wrustlecmc
VoluMill on a Haas VF0 cutting 1018 steel
- Order: Reorder
- Duration: 1:36
- Updated: 22 May 2012
This video was taken on an old Haas VF0. VoluMill gets the most out of this old workhorse, running a 1" Sandvik CoroMill 490 through 1018 steel at 110IPM, 45...
http://wn.com/VoluMill_on_a_Haas_VF0_cutting_1018_steel
This video was taken on an old Haas VF0. VoluMill gets the most out of this old workhorse, running a 1" Sandvik CoroMill 490 through 1018 steel at 110IPM, 45...
- published: 05 May 2009
- views: 5576
- author: celeritive
Haas VF-0.m4v
- Order: Reorder
- Duration: 0:53
- Updated: 25 Aug 2010
HAAS VF-0 3 Axis CNC Vertical maching Centre X: 508mm Y: 406mm Z: 508mm, Power: 20hp / 14.9 kW, RPM:7500 rpm, ATC:20, Table-Width: 355mm, Table-Length: 660 m...
http://wn.com/Haas_VF-0m4v
HAAS VF-0 3 Axis CNC Vertical maching Centre X: 508mm Y: 406mm Z: 508mm, Power: 20hp / 14.9 kW, RPM:7500 rpm, ATC:20, Table-Width: 355mm, Table-Length: 660 m...
- published: 21 Jun 2010
- views: 717
- author: 1stmachineryauctions
2014 Holden VF Commodore SS V Redline engine sound and 0-100km/h
- Order: Reorder
- Duration: 2:22
- Updated: 18 Aug 2013
2014 Holden VF Commodore SS V Redline engine sound and 0-100km/h. Head over to http://performancedrive.com.au/2014-holden-vf-commodore-review-australian-laun...
http://wn.com/2014_Holden_VF_Commodore_SS_V_Redline_engine_sound_and_0-100km_h
2014 Holden VF Commodore SS V Redline engine sound and 0-100km/h. Head over to http://performancedrive.com.au/2014-holden-vf-commodore-review-australian-laun...
- published: 29 May 2013
- views: 59253
- author: PDriveTV
ALL NEW 2014 HOLDEN VF COMMODORE SS V8!! 0-100 km/h!!! Speed Test!!!
- Order: Reorder
- Duration: 0:17
- Updated: 17 Aug 2013
The all new 2014 Holden VF Commodore SS V8, being tested to its limits from 0-100 km/h..
http://wn.com/ALL_NEW_2014_HOLDEN_VF_COMMODORE_SS_V8!!_0-100_km_h!!!_Speed_Test!!!
The all new 2014 Holden VF Commodore SS V8, being tested to its limits from 0-100 km/h..
- published: 01 Jun 2013
- views: 3535
- author: GeniusBar2012
Haas VF0 1995
- Order: Reorder
- Duration: 0:52
- Updated: 22 Jan 2014
HAAS VF-0 Vertical Machining Centre (1995)
Traverses X Y Z: 508 x 406 x 508mm,
Table 660 x 356mm,
Spindle taper BT40,
20Hp Spindle Motor,
Spindle Speed 6,000rpm,
HAAS Control,
20 Station ATC,
Programmable Coolant,
Swarf Auger,
Low Volt light,
Weight 3,175kg
Serial no. 5591
http://wn.com/Haas_VF0_1995
HAAS VF-0 Vertical Machining Centre (1995)
Traverses X Y Z: 508 x 406 x 508mm,
Table 660 x 356mm,
Spindle taper BT40,
20Hp Spindle Motor,
Spindle Speed 6,000rpm,
HAAS Control,
20 Station ATC,
Programmable Coolant,
Swarf Auger,
Low Volt light,
Weight 3,175kg
Serial no. 5591
- published: 22 Jan 2014
- views: 12
HAAS VF-0 1995
- Order: Reorder
- Duration: 1:29
- Updated: 08 Nov 2013
HAAS VF-0 (1995)
4th Axis available, see lots 13 & 14
Traverses X Y Z: 508 x 406 x 508mm,
Table 660 x 356mm,
Spindle taper BT40,
10Hp Spindle Motor,
Spindle Speed 7500rpm,
HAAS Control,
20 Station ATC,
Programmable Coolant,
Swarf Auger,
Low Volt light,
Weight 3,175 kg.
Please note. No 4th Axis is included.
http://wn.com/HAAS_VF-0_1995
HAAS VF-0 (1995)
4th Axis available, see lots 13 & 14
Traverses X Y Z: 508 x 406 x 508mm,
Table 660 x 356mm,
Spindle taper BT40,
10Hp Spindle Motor,
Spindle Speed 7500rpm,
HAAS Control,
20 Station ATC,
Programmable Coolant,
Swarf Auger,
Low Volt light,
Weight 3,175 kg.
Please note. No 4th Axis is included.
- published: 08 Nov 2013
- views: 13
2014 Holden VF Commodore SS engine sound and 0-100km/h
- Order: Reorder
- Duration: 3:10
- Updated: 21 Aug 2013
2014 Holden VF Commodore SS engine sound and 0-100km/h. Head over to http://performancedrive.com.au/2014-holden-vf-commodore-ss-review-video/ for the full review.
2014 Holden VF Commodore SS
6.0-litre V8
260kW and 517Nm
Six-speed automatic, rear-wheel drive with LSD
0-100km/h in 5.5 seconds (as tested)
http://wn.com/2014_Holden_VF_Commodore_SS_engine_sound_and_0-100km_h
2014 Holden VF Commodore SS engine sound and 0-100km/h. Head over to http://performancedrive.com.au/2014-holden-vf-commodore-ss-review-video/ for the full review.
2014 Holden VF Commodore SS
6.0-litre V8
260kW and 517Nm
Six-speed automatic, rear-wheel drive with LSD
0-100km/h in 5.5 seconds (as tested)
- published: 21 Aug 2013
- views: 535
Haas VF0 1994
- Order: Reorder
- Duration: 1:59
- Updated: 15 Apr 2013
HAAS VF-0 Vertical Machining Centre (1994) Traverses X Y Z: 508 x 406 x 508mm, Table 660 x 356mm, Spindle taper BT40, 10Hp Spindle Motor, Spindle Speed 7500r...
http://wn.com/Haas_VF0_1994
HAAS VF-0 Vertical Machining Centre (1994) Traverses X Y Z: 508 x 406 x 508mm, Table 660 x 356mm, Spindle taper BT40, 10Hp Spindle Motor, Spindle Speed 7500r...
- published: 15 Apr 2013
- views: 65
- author: 1stmachineryauctions
20" x 16" x 20" HAAS model VF-0 Vertical Machining Center
- Order: Reorder
- Duration: 2:11
- Updated: 09 Jul 2013
26" x 14" Table 16 Station Arc Cat 40 Spindle 7500 RPM HAAS 5C Indexer HAAS CCN Control 10 HP s/n 1562 Year: 1992.
http://wn.com/20_x_16_x_20_HAAS_model_VF-0_Vertical_Machining_Center
26" x 14" Table 16 Station Arc Cat 40 Spindle 7500 RPM HAAS 5C Indexer HAAS CCN Control 10 HP s/n 1562 Year: 1992.
- published: 29 Apr 2013
- views: 109
- author: Machine Videos
photo: US Army / Sgt. Charles Crail
26 Feb 2014
WASHINGTON. US President Barack Obama told Hamid Karzai on Tuesday that he is now planning for a full US troop withdrawal because of the Afghan leader's repeated refusal to sign a security pact. But in a rare telephone call with Afghan President Karzai, Obama also held out the possibility of agreeing to a post-2014 training and anti-terror mission with the next government in Kabul ... 'Zero option' ... 'Friendly' conversation ... ....(size: 4.8Kb)
photo: AP / Marko Drobnjakovic
25 Feb 2014
Article by WN.com Correspondent Dallas Darling. "Just like reformers before me, I thought that we had a system that could be improved. Instead, I learned that we had a system that needed to be replaced." -Mikhail Gorbachev. Ukrainian ballots have blood on them. Three months of deadly protests and pitched battles have wounded and killed hundreds of citizens. Meanwhile, Ukraine's parliament voted to remove President Viktor Yanukovich ... 394....(size: 4.9Kb)
photo: AP / SANA
27 Feb 2014
Syrian army troops have killed 175 opposition fighters, many of them linked to al-Qaeda-linked groups, in an ambush described as one of the deadliest attacks by government forces near Damascus, according to state media ... The report claimed several of those killed were foreign fighters who came to Syria from Saudi Arabia, Chechnya and Qatar ... From a distance, people could be seen running in different directions following the blasts ... ....(size: 5.2Kb)
photo: AP / Photo
26 Feb 2014
Suspected Islamic extremists killed more than 30 students Tuesday in northern Nigeria in an attack the president calls "heinous, brutal and mindless." ... The witnesses say when the students tried to escape, the attackers forced them back inside the burning buildings ... ....(size: 1.4Kb)
photo: AP / PhotoAndrew Lubimov
27 Feb 2014
In Kiev, leaders of the popular protests that toppled Yanukovich named former economy minister Arseny Yatseniuk as their choice to head a new interim government. Ukrainian protest leaders on Wednesday named ministers they want to form a new government following the overthrow of President Viktor Yanukovich, as Russia put troops on high alert in a show of strength ... Unpopular decisions ... Russian concern ... War games ... Currency dive ... ....(size: 7.9Kb)
« back to news headlines
Edit
QLT Announces Positive Preliminary Results From Phase 1b Retreatment Trial of QLT091001 in Subjects With ...
Stockhouse27 Feb 2014
Preliminary results of this Phase 1b study showed clinically meaningful improvements in visual fields (VF) and visual acuity (VA) ... VF was assessed using Goldmann Visual Field (GVF) and VA was assessed using best-corrected visual acuity (BCVA) at baseline and days 7, 14, 30 and 60 after each treatment course, then bimonthly until the next treatment course....(size: 11.1Kb)
Edit
QLT Announces Positive Preliminary Results From Phase 1b Retreatment Trial of QLT091001 in Subjects With Leber Congenital Amaurosis and Retinitis Pigmentosa Due to Mutations in LRAT or RPE65 (QLT Inc)
noodls27 Feb 2014
Preliminary results of this Phase 1b study showed clinically meaningful improvements in visual fields (VF) and visual acuity (VA) ... VF was assessed using Goldmann Visual Field (GVF) and VA was assessed using best-corrected visual acuity (BCVA) at baseline and days 7, 14, 30 and 60 after each treatment course, then bimonthly until the next treatment course....(size: 11.6Kb)
Edit
Canberra Times
27 Feb 2014
Click for more photos New HSV Gen-F range. Driving the new HSV Gen-F range at Phillip Island. View all 55 photos. It’s considered by cynics as a poisoned chalice. taking the mantle of a brand soon to lose its core appeal and, until now, reason for being ... The brand currently produces six V8 models which are based on the architecture and underpinnings of the VF Commodore ... “We’re always cautious not to add to speculation. ... ....(size: 3.4Kb)
Edit
noodls
27 Feb 2014
(Source. Helphire Group plc) Helphire·. (hOllp P'C. Acquisition ofthe New Law group of companies. A.IS·U'fl tr .07268 llttiN'Of«.Q PI.C. 27 lCIII\.CrY 2DI•. 2? F<J=uy 2014. • News Release •. Helphire Group pie. Fl.rhrto b rtCtrd$1Ntgi( 'NU.hb ùro.Jpcom. db tndof Dectm.ba 2013.. Ht}.hìt nrurcts b ili\. ct· l)lfim. iliro&J.c;&n; ... 'Iht NtwL;).w Cto\p is;) ... persoW.irg\Iy W ... h N!wL\w Cto.Jpv.'trt w .Vf.l4.1m. onthnd.llt ... «d....(size: 5.1Kb)
Edit
mediabistro
25 Feb 2014
The brands sponsoring the awards and the top two magazines covering the (VF and ......(size: 0.4Kb)
Edit
Business Wire
25 Feb 2014
MIAMI--(BUSINESS WIRE)--NGC® today announced that Fred Isenberg, president of consulting services for NGC, was named a winner of the Supply & Demand Chain Executive 2014 "Pros to Know" awards ... The publication’s editorial selection committee reviewed hundreds of entries before selecting this year's winners ... About NGC ... A. Bank, Marchon Eyewear, Spanx, Swatfame, VF Corporation, and many others ... (NASDAQ. AMSWA) ... FAX ... ....(size: 6.1Kb)
Edit
CounterPunch
25 Feb 2014
“Thou shalt not go up and down as a talebearer among thy people.”. – Leviticus 19.16. “There is only one thing in life worse than being talked about, and that is not being talked about.” ... And, as we have seen in Graydon Carter’s spineless spiking of an assigned piece on Gwyneth Paltrow in VF, celebrities very often wield a powerful veto, especially those who are domiciled in the UK with its punishing libel laws....(size: 5.4Kb)
Edit
mediabistro
25 Feb 2014
The brands sponsoring the awards and the top two magazines covering the (VF and ......(size: 0.4Kb)
Edit
MontaVista Introduces MV Cloud - A High Performance, Carrier Grade Cloud Platform for the Mobile and NFV Market
PR Newswire24 Feb 2014
My news for Investors. AtLeast one of the check box should be selected You are following news about Follow the latest news about CAVM. Download image. MontaVista Logo. (PRNewsFoto/MontaVista Software, LLC). BARCELONA, Spain, Feb ... (Logo ... Some of these aspects include important features like Enhanced Live Migration for example, which allows for in service migration of Virtual Functions (VF) without service disruption ... (NASDAQ ... RELATED LINKS ... ....(size: 4.0Kb)
Edit
PR Newswire
24 Feb 2014
New Online Tools Offer Workouts Based on Sport-Specific Goals. Download image. Download image. ALAMEDA, Calif., Feb ... The Mountain Athletics Training Program (www.thenorthface.com/mountainathletics) helps everyday athletes and weekend warriors alike establish a goal within three sports. running, climbing and skiing ... Registration for the first four events opens today ... The North Face, a division of VF Outdoor, Inc., was founded in 1966 ... Photo ... ....(size: 4.5Kb)
Edit
MontaVista Introduces MV Cloud – A High Performance, Carrier Grade Cloud Platform for the Mobile and NFV Market (Cavium Inc)
noodls24 Feb 2014
(Source. Cavium Inc) MontaVista Introduces MV Cloud - A High Performance, Carrier Grade Cloud Platform for the Mobile and NFV Market ... Some of these aspects include important features like Enhanced Live Migration for example, which allows for in service migration of Virtual Functions (VF) without service disruption. "MontaVista has been a leader in deploying highly available, carrier grade solutions into the market for over a decade ... Sr....(size: 4.5Kb)
Edit
noodls
20 Feb 2014
Using new Open NFV platform, OEMs and ecosystem vendors can easily migrate virtual functions (VF) between platforms based on various vendor solutions. A proof of concept (PoC) demonstrating a live VF state migration between multiple ISAs has been approved by the European Telecommunications Standards Institute (ETSI) NFV Industry Specification Group (ISG)1....(size: 7.5Kb)
Edit
PR Newswire
20 Feb 2014
Using Broadcom's new Open NFV platform, OEMs and ecosystem vendors can easily migrate virtual functions (VF) between platforms based on various vendor solutions. A proof of concept (PoC) demonstrating a live VF state migration between multiple ISAs has been approved by the European Telecommunications Standards Institute (ETSI) NFV Industry Specification Group (ISG)1....(size: 8.0Kb)
- 1
- 2
- 3
- 4
- 5
- Next page »
The VF-0 Phoenix is a fictional transforming aircraft from the Macross Zero anime science fiction series. It was created by mechanical designer Shoji Kawamori.
The Northrop Grumman/Bellcom VF-0 Phoenix variable fighter was an advanced prototype for the VF-1 Valkyrie which served as a flight test unit and later in 2008 as a front-line fighter, before the Valkyrie's mass production in November 2008. According to the fictional Macross continuity, the fighter was developed with overtechnology obtained from the massive alien space ship that crashed on Earth in the year 1999. In most respects, the VF-0 resembled the VF-1, although its legs were longer because the EGF-127 conventional turbofan engines used by the fighter were larger and bulkier than the VF-1's FF-2001 thermonuclear engines. Numerous fine details also differ, such as head designs. The VF-0D's wings are very different, replacing the variable sweep wings with a canard-delta configuration; although this would perform well, it would ultimately not be adopted for the production series VF-1.
This page contains text from Wikipedia, the Free Encyclopedia -
http://en.wikipedia.org/wiki/VF-0_Phoenix
This article is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License, which means that you can copy and modify it as long as the entire work (including additions) remains under this license.
This article is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License, which means that you can copy and modify it as long as the entire work (including additions) remains under this license.
