Look up lugger in Wiktionary, the free dictionary.

A lugger is a class of boats, widely used as traditional fishing boats, particularly off the coasts of France, England and Scotland. It is a small sailing vessel with lugsails set on two or more masts and perhaps lug topsails.

The Reaper under full sail

Defining the rig[link]

A French lugger, beached and drying nets. The lugsail is spread on the beach. She is beached stern first as is normal. In beach-launched boats, the bow is designed to rise to surf without shipping water or broaching. Painted by Gustave Courbet around 1874.

The lugsail is an evolved version of the classical square sail. In both rigs, the upper side of the sail is attached to a spar, the yard, which is hoisted up the mast by a rope known as the halyard. The lower side of the sail is held in place by a separate set of ropes, the sheet and tack downhaul.

The main difference between the lugsail and square is the location of the yard in relation to the mast. A square sail is lifted with the halyard in the middle of the yard, lifting the sail so it lies evenly on either side of the mast. In the lugger, the halyard is attached much closer to one end or the other of the yard, and when lifted the majority of the sail will lie fore or aft of the mast. Since the luff of the sail is shorter than the leech, the after end of the yard is peaked up by the combination of the upward force of the halyard and the downward force of the tack downhaul. This allows the mast to be shorter than the sail, the peaked yard making up the difference in height.

The lugsail is somewhat similar to the gaff rig as well, which also uses a spar, the gaff, which is hung at an angle to the mast. The difference is that the gaff is mounted such that it lies entirely behind the mast, as opposed to both in front and behind as in the lugger. While the gaff rig is "cleaner" in that the mast does not interfere with the sail, it requires more complex rigging and handling than the lugger.

Types of lugsail[link]

There are three sorts of lugsail: the standing lug, in which the yard remains on one side of the mast and the tack is set close to the mast, the balance lug (also called balanced lug), which resembles the standing lug, but sets a boom, which continues as far forward of the mast as the leading edge of the yard. The dipping lug lacks a boom and has the top yard dipped around the mast while changing course across the wind so that the sail draws away from the mast on each tack.

The advantages of the dipping sail arise from the fact that the set of the sail is not deformed by pressing against the mast. This allows a more efficient air flow and reduces wear of the canvas.

Another source of variation is in the extent to which the yard was designed to be peaked up. That is to say, how nearly vertical the yard was intended to be.

A Sailing Fifie, showing the main dipping lug and the mizzen standing lug. This picture of a Fifie more clearly shows the difference in the position of the tack (lower forward corner of the sail) as between a standing lug (here, the mizzen) and dipping lug (here, the main). These yards are shown set to the port sides of the masts.

The accompanying picture of Fifies on the left, a fairly late design in the evolution of the rig, shows one extreme, where the white-sailed boat looks at first glance almost to have a Bermudian rig (although on closer examination, it is clearly a Fifie on the opposite tack). The boat off-shore is a little more obviously a lugger and the others have not got their sails fully set.

The fore lug (main sail) on a Fifie is a dipping lugsail. The extreme size of the dipping lugsail showing in the picture was only possible with the introduction of steam powered capstans to facilitate with dipping.

This short extract explains the procedure:

Handling characteristics[link]

Le Corentin, a chasse-marée from Quimper. Note the three-masted lugger rig with the foremast stepped well forward, she will have set a jib from the bowsprit which is steeved up in this picture. This permits the use of the boom for loading from fishing boats at sea; without a need to lie alongside. The latter would require almost calm conditions. Here, the sails are brailed and what looks like a mizen boom is topped up. This is not a normal boom but a bumkin, as it carries the lower block of the mizen sheet, so allowing the mast to be stepped right aft, on the raked sternpost. This permits plenty of sail area, while leaving the boat as short as possible for convenience (and lower dues) in harbour. These French standing lugsail yards are slung further forward than on English luggers, so they require the peak halyards visible in this picture.

The rig combines the handiness of a fore and aft rig with much of the efficiency when running, of a square rig. A bigger lugger might set lug topsails which are very much like the lower sails but less deep. Some of the Breton chasse-marées carried topgallants. The standing sail is usually set to the starboard side of the mast. It is said that the comparative disadvantage of having the sail deformed on the starboard tack was why the rule of the road gave the right of way to a sailing vessel in that condition.

Once hoisted, the set of the sail is controlled by adjustment of the tack tackle and the sheet. It is therefore much simpler to use than a square sail so that the crew can be smaller or doing work other than that of sailing the vessel, such as that to do with fishing.

The tack tackle is critical to the performance of all lug rigs as it both brings the sail into the correct shape and, in the case of balance and standing lugs is responsible for holding the yard at the correct angle and controlling sail twist.

The name[link]

The lugsail was the earliest of the fore and aft rigs. The origin of its name is not wholly clear. The name 'lugger' may derive from the Middle Dutch for 'to trawl' or it may take its name from the lugsail. That in turn, may have its origin in the similarity of the appearance of a human ear to a fore and aft sail. The French for a fore and aft rig is un gréement aurique or for the sail, it is une voile aurique - an ear type sail. Since 'lug' is an English word for ear, this origin is a possibility.

Local types[link]

British Isles

• Coble (not strictly a lugger as cobles have only one mast), used on the English east coast from Yorkshire to Northumberland
• Cornish lugger
• Fifie, a herring drifter of the Scottish east coast
• Hastings lugger
• Manx nickey
• Manx nobby
• Sgoth Niseach, dipping lug

Continental Europe

• Barca-longa, of the Iberian and Mediterranean coasts
• Breton chasse-marée
• French lugger (lougre), of the coast of Normandy

See also[link]

• Mystery, lugger
• Spirit of Mystery, replica of the lugger Mystery
• Sophie Theresia (herring lugger)

Modern luggers (yachts)[link]

• Drascombe lugger
• Roxane (Nigel Irens design)
• Romilly (Nigel Irens design)

Further reading[link]

• Shearwood, Ken (1972) Evening Star: the story of a Cornish lugger. Truro: D. Bradford Barton

External links[link]

• Cornish Luggers: an online guide
• Cornish Luggers: an online guide; Beer luggers (formerly in use on the south Devon and Dorset coasts)
• "Lug Rigs for Small Sailboats" by John C. Harris

v t e Fishing vessels Commercial Commercial fishing boats Trawlers Seiners Drifters Longliners Factory ships Fishery Protection Squadron Fishing fleet Research vessels Whalers Whaling ships British ships Japanese ships Traditional Traditional fishing boats Bawley Bokkura Caïque Cape Islander Chasse-marée Coble Coracle Couta Currach Dogger Dhoni Dugout Falkuša Felucca Fifie Friendship sloop Galway hooker Herring buss Jangada Jukung Kolae Lugger Luzzu Mackinaw Monterey clipper Nobby Nordland Pirogue Poveiro Reed boat Sampan Sgoth Shad boat Sixareen Smack Sneakbox Well smack Yawl Yoal Dories Banks Cape Ann Gloucester McKenzie River Swampscott Oyster boats Bugeye Deadrise Log canoe Pungy Schooners Sharpie Skipjack Recreational Bass boat Farley Builders and designers Philip C. Bolger

v t e Fisheries and fishing topic areas Fisheries Fisheries science Wild fisheries Fish farming Aquaculture Fish diversity Fish diseases Fisheries management Fishing quota Sustainability Fishing Fisherman Artisan fishing Fishing villages Fishing vessels Fishing history Industrial Commercial fishing Processing Products Seafood Marketing Markets Recreational Angling Game fishing Fly fishing Catch and release Techniques Gathering Spearfishing Line fishing Netting Trawling Trapping Other Tackle Hook Line Sinker Rod Bait Lures Artificial flies Bite alarms Locations Fishing by country Fishing villages Fishing banks Fish ponds Marine habitats Index of fishing articles List of fishing topics by subject Fisheries glossary

Pete Goss, MBE is a British yachtsman who has sailed more than 250,000 nautical miles (460,000 km).

A former Royal Marine, he is famous for his pioneering project Team Philips.^[1] He received a Legion d'Honneur for saving fellow sailor Raphaël Dinelli in the 1996 Vendée Globe solo around the world yacht race. During a severe storm in the Southern Ocean, he turned his boat around and spent two days sailing into hurricane force winds, finally finding Dinelli in a life-raft that had been dropped by an Australian Air Force plane shortly before his own yacht had sunk. Dinelli is said to have come aboard clutching a bottle of champagne.^[2]

He trained the original set of amateur crews for the British Steel Challenge, and competed in the race on board Hoffbräu Lager, coming 3rd overall.

Goss currently lives in Torpoint, Cornwall,^[3] and has three teenage children: Alex, Livvy and Eliot.

In June 2008, Goss launched a replica of a 19th century wooden lugger called The Spirit of Mystery. Four months later, he began a voyage from Cornwall to Australia on the boat, which has no modern electrical or navigation systems.^[4]

Creative works[link]

• Close to the Wind (2000)

References[link]

External links[link]

• www.petegoss.com - Pete Goss Home Page
• Solar Navigator - Pete Goss MBE