| Urea |
 |
 |
 |
 |
Other names
Carbamide, carbonyl diamide, carbonyldiamine, diaminomethanal, diaminomethanone
|
| Identifiers |
| CAS number |
57-13-6  Y |
| PubChem |
1176 |
| ChemSpider |
1143 Y |
| UNII |
8W8T17847W Y |
| DrugBank |
DB03904 |
| KEGG |
D00023 Y |
| ChEBI |
CHEBI:16199 Y |
| ChEMBL |
CHEMBL985 Y |
| RTECS number |
YR6250000 |
| ATC code |
B05BC02,D02AE01 |
| Jmol-3D images |
Image 1 |
|
|
-
InChI=1S/CH4N2O/c2-1(3)4/h(H4,2,3,4) Y
Key: XSQUKJJJFZCRTK-UHFFFAOYSA-N Y
InChI=1/CH4N2O/c2-1(3)4/h(H4,2,3,4)
Key: XSQUKJJJFZCRTK-UHFFFAOYAF
|
| Properties |
| Molecular formula |
CH4N2O |
| Molar mass |
60.06 g mol−1 |
| Appearance |
White solid |
| Density |
1.32 g/cm3 |
| Melting point |
133–135 °C
|
| Solubility in water |
107.9 g/100 ml (20 °C)
167 g/100ml (40 °C)
251 g/100 ml (60 °C)
400 g/100 ml (80 °C) |
| Solubility |
50g/L ethanol, 500g/L glycerol [1] |
| Basicity (pKb) |
pKBH+ = 0.18[2] |
| Structure |
| Dipole moment |
4.56 D |
| Hazards |
| MSDS |
JT Baker |
| EU Index |
Not listed |
| Flash point |
Non-flammable |
| LD50 |
8500 mg/kg (oral, rat) |
| Related compounds |
| Related ureas |
Thiourea
Hydroxycarbamide |
| Related compounds |
Carbamide peroxide
Urea phosphate |
 N (verify) (what is:  Y/ N?)
Except where noted otherwise, data are given for materials in their standard state (at 25 °C, 100 kPa) |
| Infobox references |
Urea or carbamide is an organic compound with the chemical formula CO(NH2)2. The molecule has two —NH2 groups joined by a carbonyl (C=O) functional group.
Urea serves an important role in the metabolism of nitrogen-containing compounds by animals and is the main nitrogen-containing substance in the urine of mammals. It is solid, colourless, and odorless (although the ammonia that it gives off in the presence of water, including water vapor in the air, has a strong odor). It is highly soluble in water and practically non-toxic (LD50 is 15 g/kg for rat). Dissolved in water, it is neither acidic nor alkaline. The body uses it in many processes, the most notable one being nitrogen excretion. Urea is widely used in fertilizers as a convenient source of nitrogen. Urea is also an important raw material for the chemical industry. The synthesis of this organic compound by Friedrich Wöhler in 1828 from an inorganic precursor was an important milestone in the development of organic chemistry, as it showed for the first time that a molecule found in living organisms could be synthesized in the lab without biological starting materials (thus contradicting a theory widely prevalent at one time, called vitalism).
The terms urea and carbamide are also used for a class of chemical compounds sharing the same functional group RR'N—CO—NRR', namely a carbonyl group attached to two organic amine residues. Examples include carbamide peroxide, allantoin, and hydantoin. Ureas are closely related to biurets and related in structure to amides, carbamates, carbodiimides, and thiocarbamides.
Urea was first discovered in urine in 1727 by the Dutch scientist Herman Boerhaave, though this discovery is often attributed to the French chemist Hilaire Rouelle.[3] In 1828, the German chemist Friedrich Wöhler obtained urea by treating silver isocyanate with ammonium chloride.[4][5]
- AgNCO + NH4Cl → (NH2)2CO + AgCl
This was the first time an organic compound was artificially synthesized from inorganic starting materials, without the involvement of living organisms. The results of this experiment implicitly discredited vitalism: the theory that the chemicals of living organisms are fundamentally different from inanimate matter. This insight was important for the development of organic chemistry. His discovery prompted Wöhler to write triumphantly to Berzelius: "I must tell you that I can make urea without the use of kidneys, either man or dog. Ammonium cyanate is urea." For this discovery, Wöhler is considered by many[who?] the father of organic chemistry.
Urea is synthesized in the body of many organisms as part of the urea cycle, either from the oxidation of amino acids or from ammonia. In this cycle, amino groups donated by ammonia and L-aspartate are converted to urea, while L-ornithine, citrulline, L-argininosuccinate, and L-arginine act as intermediates. Urea production occurs in the liver and is regulated by N-acetylglutamate. Urea is found dissolved in blood (in the reference range of 2.5 to 6.7 mmol/liter) and is excreted by the kidney as a component of urine. In addition, a small amount of urea is excreted (along with sodium chloride and water) in sweat.
Amino acids from ingested food that are not used for the synthesis of proteins and other biological substances are oxidized by the body, yielding urea and carbon dioxide, as an alternative source of energy.[6] The oxidation pathway starts with the removal of the amino group by a transaminase, the amino group is then fed into the urea cycle.
Ammonia (NH3) is another common byproduct of the metabolism of nitrogenous compounds. Ammonia is smaller, more volatile and more mobile than urea. If allowed to accumulate, ammonia would raise the pH in cells to toxic levels. Therefore many organisms convert ammonia to urea, even though this synthesis has a net energy cost. Being practically neutral and highly soluble in water, urea is a safe vehicle for the body to transport and excrete excess nitrogen.
In water, the amine groups undergo slow displacement by water molecules, producing ammonia and carbonate anion. For this reason, old, stale urine has a stronger odor than fresh urine.
The handling of urea by the kidneys is a vital part of human metabolism. Besides its role as carrier of waste nitrogen, urea also plays a role in the countercurrent exchange system of the nephrons, that allows for re-absorption of water and critical ions from the excreted urine. Urea is reabsorbed in the inner medullary collecting ducts of the nephrons,[7] thus raising the osmolarity in the medullary interstitium surrounding the thin ascending limb of the loop of Henle, which in turn causes water to be reabsorbed. By action of the urea transporter 2, some of this reabsorbed urea will eventually flow back into the thin ascending limb of the tubule, through the collecting ducts, and into the excreted urine.
This mechanism, which is controlled by the antidiuretic hormone, allows the body to create hyperosmotic urine, that has a higher concentration of dissolved substances than the blood plasma. This mechanism is important to prevent the loss of water, to maintain blood pressure, and to maintain a suitable concentration of sodium ions in the blood plasmas.
The equivalent nitrogen content (in gram) of urea (in mmol) can be estimated by the conversion factor 0.028 g/mmol.[8] Furthermore, 1 gram of nitrogen is roughly equivalent to 6 grams of protein, and 1 gram of protein is roughly equivalent to 4 grams of muscle tissue. In situations such as muscle wasting, 1 mmol of excessive urea in the urine (as measured by urine volume in litres multiplied by urea concentration in mmol/l) roughly corresponds to a muscle loss of 0.67 gram.
In aquatic organisms the most common form of nitrogen waste is ammonia, whereas land-dwelling organisms convert the toxic ammonia to either urea or uric acid. Urea is found in the urine of mammals and amphibians, as well as some fish. Birds and saurian reptiles have a different form of nitrogen metabolism, that requires less water and leads to nitrogen excretion in the form of uric acid. It is noteworthy that tadpoles excrete ammonia but shift to urea production during metamorphosis. Despite the generalization above, the urea pathway has been documented not only in mammals and amphibians but in many other organisms as well, including birds, invertebrates, insects, plants, yeast, fungi, and even microorganisms.[citation needed]
More than 90% of world production of urea is destined for use as a nitrogen-release fertilizer. Urea has the highest nitrogen content of all solid nitrogenous fertilizers in common use. Therefore, it has the lowest transportation costs per unit of nitrogen nutrient. The standard crop-nutrient rating of urea is 46-0-0.[9]
Many soil bacteria possess the enzyme urease, which catalyzes the conversion of the urea molecule to two ammonia molecules and one carbon dioxide molecule, thus urea fertilizers are very rapidly transformed to the ammonium form in soils. Among soil bacteria known to carry urease, some ammonia-oxidizing bacteria (AOB) such as species of Nitrosomonas are also able to assimilate the carbon dioxide released by the reaction to make biomass via the Calvin Cycle, and harvest energy by oxidizing ammonia (the other product of urease) to nitrite, a process termed nitrification.[10] Nitrite-oxidizing bacteria, especially Nitrobacter, oxidize nitrite to nitrate, which is extremely mobile in soils and is a major cause of water pollution from agriculture. Ammonia and nitrate are readily absorbed by plants, and are the dominant sources of nitrogen for plant growth. Urea is also used in many multi-component solid fertilizer formulations. Urea is highly soluble in water and is, therefore, also very suitable for use in fertilizer solutions (in combination with ammonium nitrate: UAN), e.g., in 'foliar feed' fertilizers. For fertilizer use, granules are preferred over prills because of their narrower particle size distribution, which is an advantage for mechanical application.
The most common impurity of synthetic urea is biuret, which impairs plant growth.
Urea is usually spread at rates of between 40 and 300 kg/ha but rates vary. Smaller applications incur lower losses due to leaching. During summer, urea is often spread just before or during rain to minimize losses from volatilization (process wherein nitrogen is lost to the atmosphere as ammonia gas). Urea is not compatible with other fertilizers.
Because of the high nitrogen concentration in urea, it is very important to achieve an even spread. The application equipment must be correctly calibrated and properly used. Drilling must not occur on contact with or close to seed, due to the risk of germination damage. Urea dissolves in water for application as a spray or through irrigation systems.
In grain and cotton crops, urea is often applied at the time of the last cultivation before planting. In high rainfall areas and on sandy soils (where nitrogen can be lost through leaching) and where good in-season rainfall is expected, urea can be side- or top-dressed during the growing season. Top-dressing is also popular on pasture and forage crops. In cultivating sugarcane, urea is side-dressed after planting, and applied to each ratoon crop.
In irrigated crops, urea can be applied dry to the soil, or dissolved and applied through the irrigation water. Urea will dissolve in its own weight in water, but it becomes increasingly difficult to dissolve as the concentration increases. Dissolving urea in water is endothermic, causing the temperature of the solution to fall when urea dissolves.
As a practical guide, when preparing urea solutions for fertigation (injection into irrigation lines), dissolve no more than 30 kg urea per 100 L water.
In foliar sprays, urea concentrations of 0.5% – 2.0% are often used in horticultural crops. Low-biuret grades of urea are often indicated.
Urea absorbs moisture from the atmosphere and therefore is typically stored either in closed/sealed bags on pallets or, if stored in bulk, under cover with a tarpaulin. As with most solid fertilizers, storage in a cool, dry, well-ventilated area is recommended.
Urea is a raw material for the manufacture of many important chemical compounds, such as
Urea can be used to make urea nitrate, a high explosive that is used industrially and as part of some improvised explosive devices.
Urea is used in SNCR and SCR reactions to reduce the NOx pollutants in exhaust gases from combustion from diesel, dual fuel, and lean-burn natural gas engines. The BlueTec system, for example, injects water-based urea solution into the exhaust system. The ammonia produced by the hydrolysis of the urea reacts with the nitrogen oxide emissions and is converted into nitrogen and water within the catalytic converter.
Urea in concentrations up to 10 M is a powerful protein denaturant as it disrupts the noncovalent bonds in the proteins. This property can be exploited to increase the solubility of some proteins. A mixture of urea and choline chloride is used as a deep eutectic solvent, a type of ionic liquid.
Urea can in principle serve as a hydrogen source for subsequent power generation in fuel cells. Urea present in urine/wastewater can be used directly (though bacteria normally quickly degrade urea.) Producing hydrogen by electrolysis of urea solution occurs at a lower voltage (0.37V) and thus consumes less energy than the electrolysis of water (1.2V).[12]
Urea in concentrations up to 8 M can be used to make fixed brain tissue transparent to visible light while still preserving florescent signals from labeled cells. This allows for much deeper imaging of neuronal processes then previously obtainable using conventional one photon or two photon confocal microscopes.[13]
Urea-containing creams are used as topical dermatological products to promote rehydration of the skin. Urea 40% is indicated for psoriasis, xerosis, onychomycosis, ichthyosis, eczema, keratosis, keratoderma, corns, and calluses. If covered by an occlusive dressing, 40% urea preparations may also be used for nonsurgical debridement of nails. Urea 40% "dissolves the intercellular matrix"[14] of the nail plate. Only diseased or dystrophic nails are removed, as there is no effect on healthy portions of the nail. This drug is also used as an earwax removal aid.
Certain types of instant cold packs (or ice packs) contain water and separated urea crystals. Rupturing the internal water bag starts an endothermic reaction and allows the pack to be used to reduce swelling.
Like saline, urea injection is used to perform abortions.
Urea is the main component of an alternative medicinal treatment referred to as urine therapy.
The blood urea nitrogen (BUN) test is a measure of the amount of nitrogen in the blood that comes from urea. It is used as a marker of renal function.
Urea labeled with carbon-14 or carbon-13 is used in the urea breath test, which is used to detect the presence of the bacteria Helicobacter pylori (H. pylori) in the stomach and duodenum of humans, associated with peptic ulcers. The test detects the characteristic enzyme urease, produced by H. pylori, by a reaction that produces ammonia from urea. This increases the pH (reduces acidity) of the stomach environment around the bacteria. Similar bacteria species to H. pylori can be identified by the same test in animals such as apes, dogs, and cats (including big cats).
Urea is readily quantified by a number of different methods, such as the diacetyl monoxime colorimetric method, and the Berthelot reaction (after initial conversion of urea to ammonia via urease). These methods are amenable to high throughput instrumentation, such as automated flow injection analyzers[15] and 96-well micro-plate spectrophotometers.[16]
Urea is produced on a scale of some 100,000,000 tons per year worldwide.[17]
For use in industry, urea is produced from synthetic ammonia and carbon dioxide. Large quantities of carbon dioxide are produced during the manufacture of ammonia from coal or from hydrocarbons such as natural gas and petroleum-derived raw materials. Such point sources of CO2 facilitate direct synthesis of urea.
The basic process, developed in 1922, is also called the Bosch-Meiser urea process after its discoverers. The various urea processes are characterized by the conditions under which urea formation takes place and the way in which unconverted reactants are further processed. The process consists of two main equilibrium reactions, with incomplete conversion of the reactants. The first is an exothermic reaction of liquid ammonia with dry ice to form ammonium carbamate (H2N-COONH4):[18]
- 2 NH3 + CO2 ↔ H2N-COONH4 ()
The second is an endothermic decomposition of ammonium carbamate into urea and water:
- H2N-COONH4 ↔ (NH2)2CO + H2O
Both reactions combined are exothermic.[17]
Unconverted reactants can be used for the manufacture of other products, for example ammonium nitrate or sulfate, or they can be recycled for complete conversion to urea in a total-recycle process.
Urea can be produced as prills, granules, pellets, crystals, and solutions. Solid urea is marketed as prills or granules. The advantage of prills is that, in general, they can be produced more cheaply than granules. Properties such as impact strength, crushing strength, and free-flowing behaviour are, in particular, important in product handling, storage, and bulk transportation. Typical impurities in the production are biuret and isocyanic acid:
- 2 NH2CONH2 → H2NCONHCONH2 + NH3
- NH2CONH2 → HNCO + NH3
The biuret content is a serious concern because it is often toxic to the very plants that are to be fertilized. Urea is classified on the basis of its biuret content.
Ureas in the more general sense can be accessed in the laboratory by reaction of phosgene with primary or secondary amines, proceeding through an isocyanate intermediate. Non-symmetric ureas can be accessed by reaction of primary or secondary amines with an isocyanate.
Urea was first noticed by Hermann Boerhaave in the early 18th century from evaporates of urine. In 1773, Hilaire Rouelle obtained crystals containing urea from dog's urine by evaporating it and treating it with alcohol in successive filtrations. This method was aided by Carl Wilhelm Scheele's discovery that urine treated by concentrated nitric acid precipitated crystals. Antoine François, comte de Fourcroy and Louis Nicolas Vauquelin discovered in 1799 that the nitrated crystals were identical to Rouelle's substance and invented the term "urea." Berzelius made further improvements to its purification and finally William Prout, in 1817, succeeded in obtaining and determining the chemical composition of the pure substance. In the evolved procedure, urea was precipitated as urea nitrate by adding strong nitric acid to urine. To purify the resulting crystals, they were dissolved in boiling water with charcoal and filtered. After cooling, pure crystals of urea nitrate form. To reconstitute the urea from the nitrate, the crystals are dissolved in warm water, and barium carbonate added. The water is then evaporated and anhydrous alcohol added to extract the urea. This solution is drained off and allowed to evaporate resulting in pure urea.
The urea molecule is planar in the crystal structure, but the geometry around the nitrogens is pyramidal in the gas-phase minimum-energy structure.[19] In solid urea, the oxygen center is engaged in two N-H-O hydrogen bonds. The resulting dense and energetically favourable hydrogen-bond network is probably established at the cost of efficient molecular packing: The structure is quite open, the ribbons forming tunnels with square cross-section. The carbon in urea is described as sp2 hybridized, the C-N bonds have significant double bond character, and the carbonyl oxygen is basic compared to, say, formaldehyde. Urea's high aqueous solubility reflects its ability to engage in extensive hydrogen bonding with water.
By virtue of its tendency to form a porous frameworks, urea has the ability to trap many organic compounds. In these so-called clathrates, the organic "guest" molecules are held in channels formed by interpenetrating helices composed of hydrogen-bonded urea molecules. This behaviour can be used to separate mixtures, e.g. in the production of aviation fuel and lubricating oils, and in the separation of paraffins.
As the helices are interconnected, all helices in a crystal must have the same molecular handedness. This is determined when the crystal is nucleated and can thus be forced by seeding. The resulting crystals have been used to separate racemic mixtures.
Urea reacts with alcohols to form urethanes. Urea reacts with malonic esters to make barbituric acids.
Urea can be irritating to skin, eyes, and the respiratory tract. Repeated or prolonged contact with urea in fertilizer form on the skin may cause dermatitis.
High concentrations in the blood can be damaging. Ingestion of low concentrations of urea, such as are found in typical human urine, are not dangerous with additional water ingestion within a reasonable time-frame. Many animals (e.g., dogs) have a much more concentrated urine and it contains a higher urea amount than normal human urine; this can prove dangerous as a source of liquids for consumption in a life-threatening situation (such as in a desert).
Urea can cause algal blooms to produce toxins, and its presence in the runoff from fertilized land may play a role in the increase of toxic blooms.[20]
The substance decomposes on heating above melting point, producing toxic gases, and reacts violently with strong oxidants, nitrites, inorganic chlorides, chlorites and perchlorates, causing fire and explosion.[citation needed]
Wöhler synthesis urea in 1828.
- ^ http://toxnet.nlm.nih.gov/cgi-bin/sis/search/f?./temp/~ZAvqWP:1:sol
- ^ Williams, R. (2001-10-24). "pKa Data". http://research.chem.psu.edu/brpgroup/pKa_compilation.pdf. Retrieved 2009-11-27.
- ^ Kurzer, Frederick; Sanderson, Phyllis M. (1956). "Urea in the History of Organic Chemistry". Journal of Chemical Education (American Chemical Society) 33 (9): 452–459. DOI:10.1021/ed033p452. http://dx.doi.org/10.1021/ed033p452. Retrieved 2011-10-11.
- ^ Nicolaou, Kyriacos Costa; Tamsyn Montagnon (2008). Molecules That Changed The World. Wiley-VCH. p. 11. ISBN 978-3-527-30983-2.
- ^ Gibb, Bruce C. (2009). "Teetering towards chaos and complexity". Nature Chemistry (Nature Publishing Group) 1 (1): 17–18. DOI:10.1038/nchem.148. PMID 21378787. http://www.nature.com/nchem/journal/v1/n1/full/nchem.148.html. Retrieved 2011-06-29.
- ^ Sakami W, Harrington H (1963). "Amino acid metabolism". Annual Review of Biochemistry 32 (1): 355–98. DOI:10.1146/annurev.bi.32.070163.002035. PMID 14144484.
- ^ Walter F. Boron. Medical Physiology: A Cellular And Molecular Approach. Elsevier/Saunders. ISBN 1-4160-2328-3. Page 837
- ^ Section 1.9.2 (page 76) in: Jacki Bishop; Thomas, Briony (2007). Manual of Dietetic Practice. Wiley-Blackwell. ISBN 1-4051-3525-5.
- ^ ICIS, http://www.icis.com/v2/chemicals/9076559/urea/uses.html[dead link]
- ^ Marsh, K. L., G. K. Sims, and R. L. Mulvaney. 2005. Availability of urea to autotrophic ammonia-oxidizing bacteria as related to the fate of 14C- and 15N-labeled urea added to soil. Biol. Fert. Soil. 42:137-145.
- ^ www.dooyoo.co.uk (2009-06-19). "Lacura Multi Intensive Serum - Review - Excellent value for money - Lacura Multi Intensive Serum "Aqua complete"". Dooyoo.co.uk. http://www.dooyoo.co.uk/skin-care/lacura-multi-intensive-serum/1264192/. Retrieved 2010-12-28.
- ^ Researchers develop urea fuel cell.
- ^ http://www.nature.com/neuro/journal/vaop/ncurrent/full/nn.2928.html
- ^ "UriSec 40 How it Works". Odan Laboratories. January 2009. http://www.odanlab.com/urisec/winter/. Retrieved February 15, 2011.
- ^ Baumgartner, M., M. Flöck, P. Winter, W. Lu, and W. Baumgartner. 2005. Evaluation of flow injection analysis for determination of urea in sheep's and cow's milk. Acta Veterinaria Hungarica. 50 (3): 263-271.
- ^ Greenan, N. S., R.L. Mulvaney, and G.K. Sims. 1995. A microscale method for colorimetric determination of urea in soil extracts. Communications in Soil Science and Plant Analysis. 26:2519-2529.
- ^ a b Jozef H. Meessen and Harro Petersen “Urea” in Ullmann's Encyclopedia of Industrial Chemistry 2002, Wiley-VCH, Weinheim. doi:10.1002/14356007.a27_333
- ^ "Inorganic Chemicals » AMMONIUM CARBAMATE". Hillakomem.com. 2008-10-02. http://www.hillakomem.com/tag/ammonium-carbamate. Retrieved 2010-12-28.
- ^ Godfrey, Peter; Brown, Ronald and Hunter, Andrew (1997). "The shape of urea". Journal of Molecular Structure 413-414: 405–414. DOI:10.1016/S0022-2860(97)00176-2.
- ^ newscientist.com – US set to track toxic algal blooms
