Comparison of bird beaks, displaying different shapes adapted to different feeding methods. Not to scale.

The beak, bill or rostrum is an external anatomical structure of birds which is used for eating and for grooming, manipulating objects, killing prey, fighting, probing for food, courtship and feeding young. The terms beak and rostrum are also used to refer to a similar mouthpart in some Ornithischian dinosaurs, monotremes, cephalopods (see Cephalopod beak), cetaceans, billfishes, pufferfishes, turtles, Anuran tadpoles and sirens.

Although beaks can vary significantly in size, shape and color, they share a similar underlying structure. Two bony projections—the upper and lower mandibles—are covered with a thin keratinized layer of epidermis known as the rhamphotheca. In most species, two holes known as nares lead to the respiratory system.

Etymology[link]

Although the word 'beak' was, in the past, generally restricted to the sharpened bills of birds of prey,^[1] in modern ornithology, the terms 'beak' and 'bill' are generally considered to be synonymous.^[2]

Anatomy[link]

The bony core of the beak is a lightweight framework, like that seen on this Barn Owl's skull.

Although beaks vary significantly in size and shape from species to species, their underlying structures have a similar pattern. All beaks are composed of two jaws, generally known as the upper mandible (or maxilla) and lower mandible (or mandible). ^[3] The upper, and in some cases the lower, mandibles are strengthened internally by a complex three-dimensional network of bony spicules (or trabeculae) seated in soft connective tissue and surrounded by the hard outer layers of the beak.^[4][5]

Bones of the upper mandible[link]

A bird's upper mandible can flex upwards because it is supported by small bones which can move slightly backwards and forwards.

The upper mandible is supported by a three-pronged bone called the intermaxillary. The upper prong of this bone is embedded into the forehead, while the two lower prongs attach to the sides of the skull. At the base of the upper mandible a thin sheet of nasal bones is attached to the skull at the nasofrontal hinge, which gives mobility to the upper mandible allowing it to move upwards and downwards.^[2]

Position of vomer (shaded red) in neognathae (left) and paleognathae (right)

The base of the upper mandible or the roof when seen from the mouth is the palate, the structure of which differs greatly in the ratites. Here the vomer is large and connects with premaxillae and maxillopalatine bones in a condition termed as a "paleognathous palate". All other extant birds have a narrow forked vomer that does not connect with other bones and is then termed as neognathous. The shape of these bones varies across the bird families.

Bones of the lower mandible[link]

The lower mandible is supported by a bone known as the inferior maxillary bone—a compound bone composed of two distinct ossified pieces. These ossified plates (or rami), which can be U-shaped or V-shaped,^[3] join distally (the exact location of the joint depends on the species) but are separated proximally, attaching on either side of the head to the quadrate bone. The jaw muscles, which allow the bird to close its beak, attach to the proximal end of the lower mandible and to the bird's skull.^[6] The muscles that depress the lower mandible are usually weak except in a few birds such as the starlings and the extinct Huia which have well developed digastric muscles that aid in foraging by prying or gaping actions.^[7] In most birds, these muscles are relatively small as compared to the jaw muscles of similarly sized mammals.^[8]

Rhamphotheca[link]

The outer surface of the beak consists a thin horny sheath of keratin called the rhamphotheca,^[2][6] which can be subdivided into the rhinotheca of the upper mandible and the gnathotheca of the lower mandible.^[9] This covering arises from the Malpighian cells of the bird's epidermis,^[9] growing from plates at the base of each mandible.^[10] There is a vascular layer between the rhamphotheca and the deeper layers of the dermis, which is attached directly to the periosteum of the bones of the beak.^[11] The rhamphotheca grows continuously in most birds and in some species the color varies seasonally.^[12] In some Alcids, such as the puffins, parts of the rhamphotheca are shed each year after the breeding season while some pelicans shed a part of the bill called a "bill horn" that develops in the breeding season.^[13][14][15]

While most extant birds have a single seamless rhamphotheca, species in a few families, including the albatrosses^[9] and the Emu, have compound rhamphothecae that consist of several pieces separated and defined by softer keratinous grooves.^[16] Studies have shown that this was the primitive ancestral state of the rhamphotheca, and that the modern simple rhamphotheca resulted from the gradual loss of the defining grooves through evolution.^[17]

Tomia[link]

The sawtooth serrations on a Common Merganser's bill help it to hold tight to its fish prey.

The tomia (singular "tomium") are the cutting edges of the two mandibles.^[18] In most birds, these range from rounded to slightly sharp, but some species have evolved structural modifications which allow them to better handle their typical food sources.^[19] Granivorous (seed-eating) birds, for example, have ridges in their tomia which help the bird to slice through a seed's outer hull.^[20] Most falcons have a sharp projection along the upper mandible, with a corresponding notch on the lower mandible. They use this "tooth" to fatally sever their prey's vertebrae or to rip insects apart. Some kites, principally those that prey on insects or lizards, also have one or more of these sharp projections,^[21] as do the shrikes.^[22] Some fish-eating species, like the mergansers, have sawtooth serrations along their tomia which help them to keep hold of their slippery, wriggling prey.^[23]

Birds in roughly 30 families have tomia lined with tight bunches of very short bristles along their entire length. Most of these species are either insectivorous (preferring hard-shelled prey) or snail eaters, and the brush-like projections may help to increase the coefficient of friction between the mandibles, thereby improving the bird's ability to hold hard prey items.^[24] Serrations on hummingbird bills, found in 23% of all hummingbird genera, may perform a similar function, allowing the birds to effectively hold insect prey. They may also allow shorter billed hummingbirds to function as nectar thieves, as they can more effectively hold and cut through long or waxy flower corollas.^[25] In some cases, the color of a bird's tomia can help to distinguish between similar species. The Snow Goose, for example, has a reddish-pink bill with black tomia, while the whole beak of the similar Ross's Goose is pinkish-red, without darker tomia.^[26]

Culmen[link]

A bird's culmen is measured in a straight line from the tip of the beak to a set point — here, where the feathering starts on the bird's forehead.

The culmen is the dorsal ridge of the upper mandible.^[27] Likened by ornithologist Elliott Coues to the ridge line of a roof, it is the "highest middle lengthwise line of the bill" and runs from the point where the upper mandible emerges from the forehead's feathers to its tip.^[28] The bill's length along the culmen is one of the regular measurements made during bird banding (ringing),^[29] and is particularly useful in feeding studies.^[30] There are several standard measurements that can be made—from the beak's tip to the point where feathering starts on the forehead, from the tip to the anterior edge of the nostrils, from the tip to the base of the skull, or from the tip to the cere (for raptors and owls)^[31]—and scientists from various parts of the world generally favor one method over another.^[30] In all cases, these are chord measurements (measured in a straight line from point to point, ignoring any curve in the culmen) taken with calipers.^[29]

The shape or color of the culmen can also help with the identification of birds in the field. For example, the culmen of the Parrot Crossbill is strongly decurved, while that of the very similar Common Crossbill is more moderately curved.^[32] The culmen of a juvenile Great Northern Loon is all dark, while that of the very similarly plumaged juvenile Yellow-billed Loon is pale towards the tip.^[33]

Gonys[link]

The gonys is the ventral ridge of the lower mandible, created by the junction of the bone's two rami, or lateral plates.^[34] The proximal end of that junction—where the two plates separate—is known as the gonydeal angle or gonydeal expansion. In some gull species, the plates expand slightly at that point, creating a noticeable bulge; the size and shape of the gonydeal angle can be useful in identifying between otherwise similar species. Adults of many species of large gulls have a reddish or orangish gonydeal spot near the gonydeal expansion.^[35] This spot triggers begging behavior in gull chicks. The chick pecks at the spot on its parent's bill, which in turn stimulates the parent to regurgitate food.^[36]

Commissure[link]

Depending on its usage, commissure may refer to the junction of the upper and lower mandibles,^[37] or alternately, to the full-length apposition of the closed mandibles, from the corners of the mouth to the tip of the beak.^[38]

Nares[link]

Falcons have a small tubercule within each nare.

Most species of birds have external nares (nostrils) located somewhere on their beak. The nares are two holes—circular, oval or slit-like in shape—which lead to the nasal cavities within the bird's skull, and thus to the rest of the respiratory system.^[39] In most bird species, the nares are located in the basal third of the upper mandible. Kiwis are a notable exception; their nares are located at the tip of their bills.^[19] A handful of species have no external nares. Cormorants and darters have primitive external nares as nestlings, but these close soon after the birds fledge; adults of these species (and gannets and boobies of all ages, which also lack external nostrils) breathe through their mouths.^[9] There is typically a septum made of bone or cartilage that separates the two nares, but in some families (including gulls, cranes and New World vultures) the septum is missing.^[9] While the nares are uncovered in most species, they are covered with feathers in a few groups of birds, including grouse and ptarmigans, crows, and some woodpeckers.^[39] The feathers over a ptarmigan's nostrils help to warm the air it inhales,^[40] while those over a woodpecker's nares help to keep wood particles from clogging its nasal passages.^[41]

Species in the bird order Procellariformes have nostrils enclosed in double tubes which sit atop or along the sides of the upper mandible.^[39] These species, which include the albatrosses, petrels, diving petrels, storm petrels, fulmars and shearwaters, are widely known as "tubenoses".^[42] A number of species, including the falcons, have a small bony tubercule which projects from their nares. The function of this tubercule is unknown. Some scientists suggest it may act as a baffle, slowing down or diffusing airflow into the nares (and thus allowing the bird to continue breathing without damaging its respiratory system) during high-speed dives, but this theory has not been proved experimentally. Not all species that fly at high speeds have such tubercules, while some species which fly at low speeds do.^[43]

Operculum[link]

The Rock Dove's operculum is a soft swollen mass at the base of the bill.

The nares of some birds are covered by an operculum (plural opercula), a membraneous, horny or cartilaginous flap.^[44][45] In diving birds, the operculum keeps water out of the nasal cavity;^[44] when the birds dive, the impact force of the water closes the operculum.^[46] Some species which feed on flowers have opercula to help to keep pollen from clogging their nasal passages,^[44] while the opercula of the two species of Attagis seedsnipe help to keep dust out.^[47] The nares of nestling Tawny Frogmouths are covered with large dome-shaped opercula, which help to reduce the rapid evaporation of water vapor, and may also help to increase condensation within the nostrils themselves—both critical functions, since the nestlings get fluids only from the food their parents bring them. These opercula shrink as the birds age, disappearing completely by the time they reach adulthood.^[48] In pigeons, the operculum has evolved into a soft swollen mass that sits at the base of the bill, above the nares;^[49] though it is sometimes referred to as the "cere", the latter is a different structure.^[50] Tapaculos are the only birds able to move their operculum.^[39]

Cere[link]

Birds from a handful of families—including raptors, owls, skuas, parrots, turkeys and curassows—have a waxy structure called a cere (from the Latin cera, which means "wax") which covers the base of their bill. This structure typically contains the nares, except in the owls, where the nares are distal to the cere. Although it is sometimes feathered in parrots,^[51] the cere is typically bare and often brightly colored.^[19] In raptors, the cere is a sexual signal which indicates the "quality" of a bird; the orangeness of a Montague's Harrier's cere, for example, correlates to its body mass and physical condition.^[52] The cere color of young Eurasian Scops-Owls has an ultraviolet (UV) component, with a UV peak that correlates to the bird's mass. A chick with a lower body mass has a UV peak at a higher wavelength than a chick with a higher body mass does. Studies have shown that parent owls preferentially feed chicks with ceres that show higher wavelength UV peaks, that is, lighter-weight chicks.^[53]

The color or appearance of the cere can be used to distinguish between males and females in some species. For example, the male Great Curassow has a yellow cere, which the female (and young males) lack.^[54] The male Budgerigar's cere is blue, while the female's is pinkish or brown.^[55]

Nail[link]

The nail is the black tip of this Mute Swan's beak.

All birds of the family Anatidae (ducks, geese, and swans) have a nail, a plate of hard horny tissue at the tip of the beak.^[56] This shield-shaped structure, which sometimes spans the entire width of the beak, is often bent at the tip to form a hook.^[57] It serves different purposes depending on the bird's primary food source. Most species use their nails to dig seeds out of mud or vegetation,^[58] while diving ducks use theirs to pry molluscs from rocks.^[59] There is evidence that the nail may help a bird to grasp things; species which use strong grasping motions to secure their food have very wide nails.^[60] Certain types of mechanoreceptors, nerve cells that are sensitive to pressure, vibration or touch, are located under the nail.^[61]

The shape or color of the nail can sometimes be used to help distinguish between similar-looking species or between various ages of waterfowl. For example, the Greater Scaup has a wider black nail than does the very similar Lesser Scaup.^[62] Juvenile "grey geese" have dark nails, while most adults have pale nails.^[63] The nail gave the wildfowl family one of its former names: "Unguirostres" comes from the Latin ungus, meaning "nail" and rostrum, meaning "beak".^[57]

Rictal bristles[link]

Rictal bristles are stiff hair-like feathers that arise around the base of the beak.^[64] They are common among insectivorous birds, but are also found in some non-insectivorous species.^[65] Their function is uncertain, although several possibilities have been proposed.^[64] They may function as a "net", helping in the capture of flying prey, although to date, there has been no empirical evidence to support this idea.^[66] There is some experimental evidence to suggest that they may prevent particles from striking the eyes if, for example, a prey item is missed or broken apart on contact.^[65] They may also help to protect the eyes from particles encountered in flight, or from casual contact from vegetation.^[66] There is also evidence that the rictal bristles of some species may function tactilely, in a manner similar to that of mammal whiskers (vibrissae). Studies have shown that Herbst corpuscles, mechanoreceptors sensitive to pressure and vibration, are found in association with rictal bristles. They may help with prey detection, with navigation in darkened nest cavities, with the gathering of information during flight or with prey handling.^[66]

Egg tooth[link]

This Arctic Tern chick still has its egg tooth, the small white projection near the tip of its upper mandible.

Full-term chicks of most bird species have a small, sharp, calcified projection on their beak which they use to chip their way out of their egg.^[67] Commonly known as an egg tooth, this white spike is generally located near the tip of the upper mandible, though some species have one near the tip of their lower mandible instead, and a few species have one on each mandible.^[68] Despite its name, the projection is not an actual tooth, as the similarly-named projections of some reptiles are; instead, it is part of the integumentary system, as are claws and scales.^[69] The hatching chick first uses its egg tooth to break the membrane around an air chamber at the wide end of the egg. Then it pecks at the eggshell while turning slowly within the egg, eventually (over a period of hours or days) creating a series of small circular fractures in the shell.^[70] Once it has breached the egg's surface, the chick continues to chip at it until it has made a large hole. The weakened egg eventually shatters under the pressure of the bird's movements.^[71] The egg tooth is so critical to a successful escape from the egg that chicks of most species will perish unhatched if they fail to develop one.^[68] However, there are a few species which do not have egg teeth. Megapode chicks have an egg tooth while still in the egg but lose it before hatching,^[70] while kiwi chicks never develop one; chicks of both families escape their eggs by kicking their way out.^[72] Most chicks lose their egg teeth within a few days of hatching,^[67] though petrels keep theirs for nearly three weeks^[71] and Marbled Murrelets have theirs for up to a month.^[73] Generally, the egg tooth drops off, though in songbirds it is reabsorbed.^[71]

Color[link]

The color of a bird's beak results from concentrations of pigments—primarily melanins and carotenoids—in the epidermal layers, including the rhamphotheca.^[74] Eumelanin, which is found in the bare parts of many bird species, is responsible for all shades of gray and black; the denser the deposits of pigment found in the epidermis, the darker the resulting color. Phaeomelanin produces "earth tones" ranging from gold and rufous to various shades of brown.^[75] Although it is thought to occur in combination with eumelanin in beaks which are buff, tan, or horn-colored, researchers have yet to isolate phaeomelanin from any beak structure.^[76] More than a dozen types of carotenoids are responsible for the coloration of most red, orange, and yellow beaks.^[77] The hue of the color is determined by the precise mix of red and yellow pigments, while the saturation is determined by the density of the deposited pigments. For example, bright red is created by dense deposits of mostly red pigments, while dull yellow is created by diffuse deposits of mostly yellow pigments. Bright orange is created by dense deposits of both red and yellow pigments, in roughly equal concentrations.^[78] Beak coloration helps to make displays using those beaks more obvious.^[79]

Birds are capable of seeing colors in the ultraviolet range, and some species are known to have ultraviolet peaks of reflectance (indicating the presence of ultraviolet color) on their beaks.^[80] The presence and intensity of these peaks may indicate a bird's fitness,^[52] sexual maturity or pair bond status.^[80] King and Emperor Penguins, for example, show spots of ultraviolet reflectance only as adults. These spots are brighter on paired birds than on courting birds. The position of such spots on the beak may be important in allowing birds to identify conspecifics. For instance, the very similarly-plumaged King and Emperor Penguins have UV-reflective spots in different positions on their beaks.^[80]

In general, beak color depends on a combination of the bird's hormonal state and diet. Colors are typically brightest as the breeding season approaches, and palest after breeding.^[35]

Dimorphism[link]

The beaks of the now-extinct Huia (female upper, male lower) show marked sexual dimorphism

The size and shape of the beak can vary across species as well as between them; in some species, the size and proportions of the beak vary between males and females. This allows the sexes to utilize different ecological niches, thereby reducing intraspecific competition.^[81] For example, females of nearly all shorebirds have longer bills than males of the same species,^[82] and female American Avocets have beaks which are slightly more upturned than those of males.^[83] Males of the larger gull species have bigger, stouter beaks than those of females of the same species, and immatures can have smaller, more slender beaks than those of adults.^[84] Many hornbills show sexual dimorphism in the size and shape of both beaks and casques, and the female Huia's slim, decurved bill was nearly twice as long as the male's straight, thicker one.^[85]

Color can also differ between sexes or ages within a species. Typically, such a color difference is due to the presence of androgens. For example, in House Sparrows, melanins are produced only in the presence of testosterone; castrated male House Sparrows—like female House Sparrows—have brown beaks. Castration also prevents the normal seasonal color change in the beaks of male Black-headed Gulls and Indigo Buntings.^[86]

Functions[link]

Three Barn Owls threatening an intruder. Barn Owl threat displays usually include hissing and bill-snapping, as here

Birds may bite or stab with their beaks to defend themselves.^[87] Some species use their beaks in displays of various sorts. As part of his courtship, for example, the male Garganey touches his beak to the blue speculum feathers on his wings in a fake preening display, and the male Mandarin Duck does the same with his orange sail feathers.^[88] A number of species use a gaping, open beak in their fear and/or threat displays. Some augment the display by hissing or breathing heavily, while others clap their beaks.^[89]

Communication[link]

A number of species, including storks, some owls, frogmouths and the Noisy Miner, use bill clapping as a form of communication.^[90]

Heat exchange[link]

Studies have shown that some birds use their beaks to rid themselves of excess heat. The Toco Toucan, which has the largest beak relative to the size of its body of any bird species, is capable of modifying the blood flow to its beak. This process allows the beak to work as a "transient thermal radiator", reportedly rivaling an elephant's ears in its ability to radiate body heat.^[91] Measurements of the bill sizes of several species of American sparrows found in salt marshes along the North American coastlines show a strong correlation with summer temperatures recorded in the locations where the sparrows breed; latitude alone showed a much weaker correlation. By dumping excess heat through their bills, the sparrows are able to avoid the water loss which would be required by evaporative cooling—an important benefit in a windy habitat where freshwater is scarce.^[92] Several ratites, including the Common Ostrich, the Emu and the Southern Cassowary, use various bare parts of their bodies (including their beaks) to dissipate as much as 40% of their metabolic heat production.^[93] Alternately, studies have shown that birds from colder climates (higher altitudes or latitudes and lower environmental temperatures) have smaller beaks, lessening heat loss from that structure.^[94]

Billing[link]

When billing, Northern Gannets raise their beaks high and clatter them against each other.

During courtship, mated pairs of many bird species touch or clasp each other's bills. Termed billing (also nebbing in British English),^[95] this behavior appears to strengthen pair bonding.^[96] The amount of contact involved varies among species. Some gently touch only a part of their partner's beak while others clash their beaks vigorously together.^[97]

Gannets raise their bills high and repeatedly clatter them, the male puffin nibbles at the female's beak, the male waxwing puts his bill in the female's mouth and ravens hold each other's beaks in a prolonged "kiss".^[98] Billing can also be used as a gesture of appeasement or subordination. Subordinate Gray Jay routinely bill more dominant birds, lowering their body and quivering their wings in the manner of a young bird food begging as they do so.^[99] A number of parasites, including rhinonyssids and Trichomonas gallinae are known to be transferred between birds during episodes of billing.^[100][101]

Usage of the term has spread beyond avian behavior; "billing and cooing" in reference to human courtship (particularly kissing) has been in use since Shakespeare's time,^[102] and derives from the courtship of doves.^[103]

Beak trimming[link]

Because the beak is a sensitive organ with many sensory receptors, beak trimming is "acutely painful"^[104] to the birds it is performed on. It is nonetheless routinely done to intensively farmed poultry flocks, particularly laying and broiler breeder flocks, because it helps reduce the damage the flocks inflicts on themselves due to a number of stress-induced behaviors, including cannibalism, vent pecking and feather pecking. A cauterizing blade or infrared beam is used to cut off about half of the upper beak and about a third of the lower beak. Pain and sensitivity can persist for weeks or months after the procedure, and neuromas can form along the cut edges. Food intake typically decreases for some period after the beak is trimmed. However, studies show that trimmed poultry's adrenal glands weigh less, and their plasma corticosterone levels are lower than those found in untrimmed poultry, indicating that they are less stressed overall.^[104]

A similar but separate practice, usually performed by an avian veterinarian or an experienced birdkeeper, involves clipping, filing or sanding the beaks of captive birds for health purposes - in order to correct or temporarily alleviate overgrowths or deformities and better allow the bird to go about its normal feeding and preening activities.^[105] Amongst raptor keepers, this practice is commonly known as 'coping'.^[106]

See also[link]

• Bird anatomy
• Bill tip organ

References[link]

Sources[link]